This document provides an overview of power supplies and switched mode power supplies (SMPS). It discusses the basic components and functioning of linear regulated power supplies, including transformers, rectifiers, filters, regulators and dual supplies. It then introduces SMPS, noting their higher efficiency compared to linear supplies. The document explains the basic block diagram and working of SMPS, including input rectification, inverters, output transformers, rectification and filtering. It also discusses feedback loops, topologies, and popular non-isolated SMPS types like boost, buck and buck-boost converters.
This document discusses power supplies and switched mode power supplies (SMPS). It begins with an overview of power supplies and their basic components like transformers, rectifiers, and regulators. It then covers the categories of power supplies, including linear regulated and SMPS. The document discusses the components and workings of SMPS in detail, including the inverter, output transformer, rectifier and filter. It covers the advantages of SMPS like higher efficiency and smaller size compared to traditional power supplies. In the end, it discusses different feedback techniques used in SMPS.
This document provides an overview of the key components and functioning of a typical power supply that converts 230V AC household voltage to 12V DC. It describes how the AC voltage passes through a filter, then a transformer that steps it down, before being rectified and filtered to produce a pulsating DC signal. Finally, a regulator circuit stabilizes the output to produce a steady 12V DC power source required by many electronic devices.
- The document describes the key components and functioning of a typical power supply, including how it converts alternating current (AC) from a power outlet into direct current (DC) to power electronic circuits and components.
- The main components are a transformer, rectifier, filter, and regulator. The transformer steps down the AC voltage, the rectifier converts it to pulsating DC, the filter smooths it to constant DC, and the regulator maintains a steady output voltage.
- Power supplies are essential to power all electronic equipment and provide precisely regulated DC voltages needed by semiconductor devices, circuits, and systems.
- The document describes the key components and functioning of a typical power supply system, including how it converts alternating current (AC) from a power outlet into direct current (DC) to power electronic circuits and components.
- The main components are a transformer, rectifier, filter, and regulator. The transformer steps down the AC voltage, the rectifier converts it to pulsating DC, the filter smooths it to constant DC, and the regulator maintains a fixed output voltage.
- Power supplies are essential to power all electronic equipment and provide properly regulated voltage levels required by semiconductor devices and integrated circuits.
- The document describes the key components and functioning of a typical power supply, including how it converts alternating current (AC) from a power outlet into direct current (DC) to power electronic circuits and components.
- The main components are a transformer, rectifier, filter, and regulator. The transformer steps down the AC voltage, the rectifier converts it to pulsating DC, the filter smooths it to constant DC, and the regulator maintains a steady output voltage.
- Power supplies are essential to power all electronic equipment and provide precisely regulated DC voltages needed by semiconductor devices, circuits, and systems.
There are several types of power supplies that can be used for electronic circuits. A basic power supply consists of a transformer, rectifier, and smoothing capacitor. More advanced supplies also include a voltage regulator. The transformer steps down the high voltage mains power. The rectifier converts AC to DC. Smoothing reduces voltage fluctuations. Regulators ensure a constant output voltage. Some circuits require a dual supply with both positive and negative outputs.
lecture 10 - electrical machines - dc to dc converters 1.pptxJohnkamanda3
The document discusses power electronics and DC-DC converters. It provides background on power electronics interfaces and how DC-DC converters are used to convert unregulated DC voltages from batteries or supplies into regulated lower voltages for electronic devices. It then discusses different types of DC-DC converters in more detail, including linear converters, switch mode converters, and various topologies like buck, boost, and buck-boost converters. The key aspects covered are efficiency, power losses, operating principles of different converter types, and design procedures for buck converters including example calculations.
- Types of AC-DC converters include half wave, full wave, and three-phase converters.
- Full wave converters use a center tapped transformer or bridge rectifier to convert both halves of the AC wave.
- Three-phase converters are used for industrial applications and generate DC from three-phase AC.
This document discusses power supplies and switched mode power supplies (SMPS). It begins with an overview of power supplies and their basic components like transformers, rectifiers, and regulators. It then covers the categories of power supplies, including linear regulated and SMPS. The document discusses the components and workings of SMPS in detail, including the inverter, output transformer, rectifier and filter. It covers the advantages of SMPS like higher efficiency and smaller size compared to traditional power supplies. In the end, it discusses different feedback techniques used in SMPS.
This document provides an overview of the key components and functioning of a typical power supply that converts 230V AC household voltage to 12V DC. It describes how the AC voltage passes through a filter, then a transformer that steps it down, before being rectified and filtered to produce a pulsating DC signal. Finally, a regulator circuit stabilizes the output to produce a steady 12V DC power source required by many electronic devices.
- The document describes the key components and functioning of a typical power supply, including how it converts alternating current (AC) from a power outlet into direct current (DC) to power electronic circuits and components.
- The main components are a transformer, rectifier, filter, and regulator. The transformer steps down the AC voltage, the rectifier converts it to pulsating DC, the filter smooths it to constant DC, and the regulator maintains a steady output voltage.
- Power supplies are essential to power all electronic equipment and provide precisely regulated DC voltages needed by semiconductor devices, circuits, and systems.
- The document describes the key components and functioning of a typical power supply system, including how it converts alternating current (AC) from a power outlet into direct current (DC) to power electronic circuits and components.
- The main components are a transformer, rectifier, filter, and regulator. The transformer steps down the AC voltage, the rectifier converts it to pulsating DC, the filter smooths it to constant DC, and the regulator maintains a fixed output voltage.
- Power supplies are essential to power all electronic equipment and provide properly regulated voltage levels required by semiconductor devices and integrated circuits.
- The document describes the key components and functioning of a typical power supply, including how it converts alternating current (AC) from a power outlet into direct current (DC) to power electronic circuits and components.
- The main components are a transformer, rectifier, filter, and regulator. The transformer steps down the AC voltage, the rectifier converts it to pulsating DC, the filter smooths it to constant DC, and the regulator maintains a steady output voltage.
- Power supplies are essential to power all electronic equipment and provide precisely regulated DC voltages needed by semiconductor devices, circuits, and systems.
There are several types of power supplies that can be used for electronic circuits. A basic power supply consists of a transformer, rectifier, and smoothing capacitor. More advanced supplies also include a voltage regulator. The transformer steps down the high voltage mains power. The rectifier converts AC to DC. Smoothing reduces voltage fluctuations. Regulators ensure a constant output voltage. Some circuits require a dual supply with both positive and negative outputs.
lecture 10 - electrical machines - dc to dc converters 1.pptxJohnkamanda3
The document discusses power electronics and DC-DC converters. It provides background on power electronics interfaces and how DC-DC converters are used to convert unregulated DC voltages from batteries or supplies into regulated lower voltages for electronic devices. It then discusses different types of DC-DC converters in more detail, including linear converters, switch mode converters, and various topologies like buck, boost, and buck-boost converters. The key aspects covered are efficiency, power losses, operating principles of different converter types, and design procedures for buck converters including example calculations.
- Types of AC-DC converters include half wave, full wave, and three-phase converters.
- Full wave converters use a center tapped transformer or bridge rectifier to convert both halves of the AC wave.
- Three-phase converters are used for industrial applications and generate DC from three-phase AC.
The document discusses different types of voltmeters including direct coupled DC voltmeters, chopper type DC voltmeters, solid state DC voltmeters, and AC voltmeters using rectifiers. Direct coupled DC voltmeters use cascaded transistors for amplification but have limited range due to gain. Chopper type voltmeters convert DC to AC using a modulator and demodulator to allow for higher sensitivity measurements down to microvolts. Solid state voltmeters use op-amps and feedback to adjust gain while diodes provide overvoltage protection. AC voltmeters use a bridge rectifier and meter movement to indicate the RMS value of an AC input signal.
Modern electric drives use traction motors powered by multi-stage converters to provide torque for vehicles like trains and elevators. Traction motors require high starting torque, ability to handle overloads, and withstand voltage fluctuations. Recent trends include multi-stage converters that generate near-sinusoidal voltages using fewer switches at lower frequencies than traditional converters. This improves efficiency and reduces harmonic losses and electromagnetic interference. Modular multi-level converters allow continuous current flow in all switches.
This document provides information about x-ray generators. It discusses the key components of x-ray generators including transformers, rectifiers, and exposure timers. The transformers are used to increase or decrease voltage in the circuit. Rectifiers convert alternating current to direct current. Exposure timers control the length of x-ray exposures. The document also describes different types of x-ray generators such as three-phase generators, power storage generators, and automatic exposure control systems.
A voltage regulator is a circuit that creates and maintains a fixed output voltage, irrespective of changes to the input voltage or load conditions. Voltage regulators (VRs) keep the voltages from a power supply within a range that is compatible with the other electrical components. While voltage regulators are most commonly used for DC/DC power conversion, some can perform AC/AC or AC/DC power conversion as well. This article will focus on DC/DC voltage regulators.
1. An inverter refers to a power electronic device that converts DC input voltages to AC output voltages at the required magnitude and frequency.
2. There are three basic types of dc-ac converters depending on their AC output waveform: square wave, modified sine wave, and pure sine wave.
3. Inverters have applications in adjustable speed AC drives, electric vehicles, induction heating, aircraft power supplies, photovoltaic systems, UPS, and air conditioning units.
The document discusses the key components and operation of a basic power supply, including a transformer, rectifier, filter, and voltage regulator. It describes how a transformer steps down the AC voltage, how rectifiers like half-wave and bridge rectifiers convert AC to pulsating DC, and how filters using capacitors smooth the output. Regulators maintain a constant output voltage despite variations. Common filter types include RC filters and LC filters using inductors and capacitors. Zener diodes and transistor circuits are discussed as voltage regulator elements.
This document provides an overview of power electronics. It discusses different types of power electronic converters including rectifiers, inverters, DC-DC converters, and AC-AC converters. It also covers topics like harmonics, semiconductor devices used in power electronics, and applications of power electronics. The document is divided into multiple chapters that go into further details on specific topics like diode and thyristor rectifiers, Fourier analysis, and effects of harmonics on power system components.
This document provides an overview of power electronics. It discusses different types of power electronic converters including rectifiers, inverters, DC-DC converters, and AC-AC converters. It also covers topics like harmonics, semiconductor devices used in power electronics, and applications of power electronics. The document contains chapters that go into more detail on specific topics like diode rectifiers, thyristor rectifiers, Fourier analysis, and more.
Pre Final Year project/ mini project for Electronics and communication engine...Shirshendu Das
The document describes a project to construct a full wave rectifier circuit that converts 220V AC input into 5V, -5V, and variable 5V DC output. It includes a center tapped transformer, bridge rectifier using 4 diodes, and voltage regulators. Capacitor filters are used to obtain smooth DC waveforms from the pulsating rectified output. The circuit is simulated using NI Multisim software and experimental results are analyzed. Positive 5V output is obtained using an LM7805 regulator, negative 5V output uses an LM7905 regulator, and an LM317 provides adjustable output.
Making a simple variable power supply.
Power supply applications.
Ac and Dc current defintions.
Half wave and full wave rectifier.
Power supply circuit.
Used tools.
Working steps.
Testing.
This document describes a student project on designing a regulated power supply. It includes an introduction to power supplies and their objectives. The main blocks of a regulated power supply are described as the transformer, rectifier, filter and regulator. The transformer steps down the input voltage. The rectifier converts AC to DC while the filter removes ripples. The regulator maintains a constant output voltage despite input variations. Types of each component are defined. The circuit diagram and applications of regulated power supplies are provided. It concludes that regulated power supplies provide steady voltage for electronic devices.
The document discusses power supplies, which take alternating current (AC) and convert it to direct current (DC) to power electronic devices. Power supplies consist of a transformer, rectifier, filter network, voltage regulator, and protection components. The document compares different types of rectifiers like half-wave, full-wave, and bridge rectifiers. It also discusses important concepts, safety considerations, and switching mode power supplies.
08_electronics.basics and introduction12vikknaguem
This document provides an overview of basic electronics concepts including circuits, power supplies, transistors, and impedance. It discusses basic circuit analysis and relations involving voltage, current, resistance, capacitance, and inductance. Examples are given of voltage dividers, battery output impedance, full-wave rectification using a diode bridge, voltage regulation using zener diodes and voltage regulator ICs, transistor operation in amplification and switching modes, and an improved zener regulator circuit using a transistor buffer.
08_electronics.basics and introduction23vikknaguem
This document provides an overview of basic electronics concepts including circuits, power supplies, transistors, and impedance. It discusses basic circuit analysis and relations involving voltage, current, resistance, capacitance, and inductance. Examples are given of voltage dividers, battery output impedance, full-wave rectification circuits, smoothing circuits using capacitors, zener diode voltage regulation, and transistor operation in amplification and switching modes.
This document describes a buck converter subsystem and current sensing techniques. It contains the following key points:
1. The objective is to efficiently step down DC voltage while reducing ripple to produce a smooth output voltage, and to measure the inductor current.
2. The subsystem includes a circuit configuration, components, design equations, and current waveforms. Techniques for current sensing include simplified and advanced methods.
3. An advanced current sensing model uses a simplified inductor model with a parasitic resistance and capacitor to determine the inductor current based on the voltage across a sensing capacitor. Assumptions are provided for component values and tolerances.
The document discusses various types of rectifier circuits including uncontrolled and controlled single phase and three phase rectifiers. It also discusses different power electronic converters such as inverters, choppers, and cycloconverters. Key devices for power electronics applications discussed include transistors, MOSFETs, IGBTs, and thyristors. Application areas mentioned include UPS, HVDC transmission, and motor drives. The document provides circuit diagrams, operating principles, and example calculations for different power electronic converters.
This document discusses power electronics and drives, including AC converters and electrical drives. It covers inverters that convert DC to AC, including half-bridge and full-bridge single-phase inverters. It also discusses AC-AC converters like AC voltage controllers and cycloconverters. For electrical drives, it defines them, compares mechanical and electrical drives, and shows the basic block diagram of an electrical drive system including the power source, power modulator, motor, load, and control unit.
The document discusses different types of voltmeters including direct coupled DC voltmeters, chopper type DC voltmeters, solid state DC voltmeters, and AC voltmeters using rectifiers. Direct coupled DC voltmeters use cascaded transistors for amplification but have limited range due to gain. Chopper type voltmeters convert DC to AC using a modulator and demodulator to allow for higher sensitivity measurements down to microvolts. Solid state voltmeters use op-amps and feedback to adjust gain while diodes provide overvoltage protection. AC voltmeters use a bridge rectifier and meter movement to indicate the RMS value of an AC input signal.
Modern electric drives use traction motors powered by multi-stage converters to provide torque for vehicles like trains and elevators. Traction motors require high starting torque, ability to handle overloads, and withstand voltage fluctuations. Recent trends include multi-stage converters that generate near-sinusoidal voltages using fewer switches at lower frequencies than traditional converters. This improves efficiency and reduces harmonic losses and electromagnetic interference. Modular multi-level converters allow continuous current flow in all switches.
This document provides information about x-ray generators. It discusses the key components of x-ray generators including transformers, rectifiers, and exposure timers. The transformers are used to increase or decrease voltage in the circuit. Rectifiers convert alternating current to direct current. Exposure timers control the length of x-ray exposures. The document also describes different types of x-ray generators such as three-phase generators, power storage generators, and automatic exposure control systems.
A voltage regulator is a circuit that creates and maintains a fixed output voltage, irrespective of changes to the input voltage or load conditions. Voltage regulators (VRs) keep the voltages from a power supply within a range that is compatible with the other electrical components. While voltage regulators are most commonly used for DC/DC power conversion, some can perform AC/AC or AC/DC power conversion as well. This article will focus on DC/DC voltage regulators.
1. An inverter refers to a power electronic device that converts DC input voltages to AC output voltages at the required magnitude and frequency.
2. There are three basic types of dc-ac converters depending on their AC output waveform: square wave, modified sine wave, and pure sine wave.
3. Inverters have applications in adjustable speed AC drives, electric vehicles, induction heating, aircraft power supplies, photovoltaic systems, UPS, and air conditioning units.
The document discusses the key components and operation of a basic power supply, including a transformer, rectifier, filter, and voltage regulator. It describes how a transformer steps down the AC voltage, how rectifiers like half-wave and bridge rectifiers convert AC to pulsating DC, and how filters using capacitors smooth the output. Regulators maintain a constant output voltage despite variations. Common filter types include RC filters and LC filters using inductors and capacitors. Zener diodes and transistor circuits are discussed as voltage regulator elements.
This document provides an overview of power electronics. It discusses different types of power electronic converters including rectifiers, inverters, DC-DC converters, and AC-AC converters. It also covers topics like harmonics, semiconductor devices used in power electronics, and applications of power electronics. The document is divided into multiple chapters that go into further details on specific topics like diode and thyristor rectifiers, Fourier analysis, and effects of harmonics on power system components.
This document provides an overview of power electronics. It discusses different types of power electronic converters including rectifiers, inverters, DC-DC converters, and AC-AC converters. It also covers topics like harmonics, semiconductor devices used in power electronics, and applications of power electronics. The document contains chapters that go into more detail on specific topics like diode rectifiers, thyristor rectifiers, Fourier analysis, and more.
Pre Final Year project/ mini project for Electronics and communication engine...Shirshendu Das
The document describes a project to construct a full wave rectifier circuit that converts 220V AC input into 5V, -5V, and variable 5V DC output. It includes a center tapped transformer, bridge rectifier using 4 diodes, and voltage regulators. Capacitor filters are used to obtain smooth DC waveforms from the pulsating rectified output. The circuit is simulated using NI Multisim software and experimental results are analyzed. Positive 5V output is obtained using an LM7805 regulator, negative 5V output uses an LM7905 regulator, and an LM317 provides adjustable output.
Making a simple variable power supply.
Power supply applications.
Ac and Dc current defintions.
Half wave and full wave rectifier.
Power supply circuit.
Used tools.
Working steps.
Testing.
This document describes a student project on designing a regulated power supply. It includes an introduction to power supplies and their objectives. The main blocks of a regulated power supply are described as the transformer, rectifier, filter and regulator. The transformer steps down the input voltage. The rectifier converts AC to DC while the filter removes ripples. The regulator maintains a constant output voltage despite input variations. Types of each component are defined. The circuit diagram and applications of regulated power supplies are provided. It concludes that regulated power supplies provide steady voltage for electronic devices.
The document discusses power supplies, which take alternating current (AC) and convert it to direct current (DC) to power electronic devices. Power supplies consist of a transformer, rectifier, filter network, voltage regulator, and protection components. The document compares different types of rectifiers like half-wave, full-wave, and bridge rectifiers. It also discusses important concepts, safety considerations, and switching mode power supplies.
08_electronics.basics and introduction12vikknaguem
This document provides an overview of basic electronics concepts including circuits, power supplies, transistors, and impedance. It discusses basic circuit analysis and relations involving voltage, current, resistance, capacitance, and inductance. Examples are given of voltage dividers, battery output impedance, full-wave rectification using a diode bridge, voltage regulation using zener diodes and voltage regulator ICs, transistor operation in amplification and switching modes, and an improved zener regulator circuit using a transistor buffer.
08_electronics.basics and introduction23vikknaguem
This document provides an overview of basic electronics concepts including circuits, power supplies, transistors, and impedance. It discusses basic circuit analysis and relations involving voltage, current, resistance, capacitance, and inductance. Examples are given of voltage dividers, battery output impedance, full-wave rectification circuits, smoothing circuits using capacitors, zener diode voltage regulation, and transistor operation in amplification and switching modes.
This document describes a buck converter subsystem and current sensing techniques. It contains the following key points:
1. The objective is to efficiently step down DC voltage while reducing ripple to produce a smooth output voltage, and to measure the inductor current.
2. The subsystem includes a circuit configuration, components, design equations, and current waveforms. Techniques for current sensing include simplified and advanced methods.
3. An advanced current sensing model uses a simplified inductor model with a parasitic resistance and capacitor to determine the inductor current based on the voltage across a sensing capacitor. Assumptions are provided for component values and tolerances.
The document discusses various types of rectifier circuits including uncontrolled and controlled single phase and three phase rectifiers. It also discusses different power electronic converters such as inverters, choppers, and cycloconverters. Key devices for power electronics applications discussed include transistors, MOSFETs, IGBTs, and thyristors. Application areas mentioned include UPS, HVDC transmission, and motor drives. The document provides circuit diagrams, operating principles, and example calculations for different power electronic converters.
This document discusses power electronics and drives, including AC converters and electrical drives. It covers inverters that convert DC to AC, including half-bridge and full-bridge single-phase inverters. It also discusses AC-AC converters like AC voltage controllers and cycloconverters. For electrical drives, it defines them, compares mechanical and electrical drives, and shows the basic block diagram of an electrical drive system including the power source, power modulator, motor, load, and control unit.
Similar to powersupply-120904002231-phpapp02.pdf (20)
1) The document discusses domains and ranges of functions. It defines domain as the set of all possible input values, and range as the set of all output values.
2) It provides steps to find the domain of rational functions, square root functions, and examples of determining domains and ranges of various functions.
3) Key points covered include: the domain of a polynomial function is all real numbers; finding the domain of a rational function involves setting the denominator equal to zero; the square root function's domain must satisfy the argument being greater than or equal to zero.
This document covers properties and techniques for evaluating limits, including:
1. Properties of limits such as the limit of a constant, sum of functions, product of functions, and quotient of functions.
2. Methods for solving limits including multiplying by the conjugate, using trigonometric identities, and L'Hopital's rule.
3. Examples are provided to demonstrate each property and method.
1) The document discusses derivatives of functions including the power rule, chain rule, derivatives of trigonometric functions, and higher order derivatives.
2) It provides examples of finding the first, second, and third derivatives of various functions using derivative rules.
3) One example uses the chain rule to express the derivative dy/dx in terms of x and y for a function of composite form.
lect5.gggghhhhhhhhhhhhyyhhhygfe6 in b cfpdfHebaEng
This document discusses various types of integrals including indefinite, exponential, logarithmic, and definite integrals. It provides examples of evaluating integrals using techniques like integration by parts and applying integrals to find the length of a plane curve. Homework is assigned involving evaluating different integrals using the covered methods.
Sensors are devices that detect physical inputs from the environment and convert them into electrical signals. They work by detecting changes in the environment and converting physical quantities to electrical signals. The document discusses sensors' working principles and types, and notes that future technologies will integrate sensors with artificial intelligence and smart homes to enhance automation, optimize urban infrastructure, and advance health monitoring through miniaturized sensors.
This document contains 5 differential equations to solve as homework problems: (1) a second order linear equation, (2) an exact equation involving xy terms, (3) a separable first order equation with fractional coefficients, (4) an exact first order equation involving x and y, (5) another separable first order equation involving x and y terms.
PIC1jjkkkkkkkjhgfvjitr c its GJ tagging huggHebaEng
The document provides an overview of PIC microcontrollers, specifically the PIC16F877 microcontroller. It discusses the agenda which includes what a microcontroller is, types of microcontrollers, features and internal structure of the PIC16F877A, and instruction execution. It then covers the specific topics of the PIC16F877A's memory, registers, architecture, peripheral features including I/O ports, analog-to-digital converter, and timer/counter modules.
Sensors by computer applications gghhhhhhhhhhhhhhhhhhhhhhffffffffffffffffffffffffffffgffggttttsvbkihhhggttfffffffffffffffffggggttggggyyyyy h ilc you k fd7ihft I yft8iggd e u hbvd67ufr6uufffhjoytrdfhiigfffghj I cc c for judging Jukka c ffffg b gffryhhu.
Nn h Todd I k he kidd cnn I kgf um b dc m l1234567889pp2356789p002224564221356788
Cramer's rule is a method for solving systems of linear equations. It involves calculating the determinants of matrices. For a system of n variables (x1, x2, ..., xn) written in matrix form AX = B, the value of each variable is calculated as the determinant of the coefficient matrix with one column replaced by the constants column, divided by the determinant of the coefficient matrix. For a 2x2 system, Cramer's rule involves calculating the determinants D, Dx1, and Dx2. For a 3x3 system, the determinants are D, Dx1, Dx2, and Dx3. An example of applying Cramer's rule to a 2x
1. The document discusses matrices, including definitions, types of matrices, operations on matrices such as addition, subtraction, multiplication, and properties of these operations.
2. It also covers solving systems of linear equations using matrices, including finding the inverse and using Grammer's Rule.
3. The document concludes with an introduction to vectors, including definitions, operations like addition and subtraction, unit vectors, and applications of vectors such as the dot product and cross product.
1. The document contains questions and answers about programmable logic controllers (PLCs) and digital controllers.
2. It compares key differences between PLCs and computers, such as PLCs being designed for logic control in industrial environments while computers are optimized for calculation and display tasks.
3. The document also discusses PLC programming languages like ladder logic and statement lists, as well as components, communication types, and advantages of PLCs.
1) The document discusses the asynchronous and synchronous modes of the USART serial communication protocol for PIC microcontrollers.
2) In asynchronous mode, the USART can operate in either 8-bit or 9-bit mode and supports full-duplex communication. The baud rate is set using the SPBRG register.
3) In synchronous master mode, the USART generates the serial clock and can only transmit or receive data at a time (half-duplex). The baud rate formula is different. In synchronous slave mode, the USART receives the external serial clock.
The document describes various x86 assembly language instructions including:
- Logical instructions (AND, OR, XOR, TEST, NOT) and examples of how they operate on operands.
- Arithmetic instructions (INC, DEC, NEG) and how they affect flags.
- Shift and rotate instructions (SHL, SHR, ROL, ROR, RCR, RCL) and which flags they affect.
- Comparison instruction (CMP) and how it compares operands and sets flags.
- Signed arithmetic shift instructions (SAR, SCR) and questions about drawing hardware diagrams and writing programs using these instructions.
1. The document describes a block diagram of an 8086 microprocessor system with 2x1Kx8 RAM that can be used for 16-bit operation starting at address FF000h.
2. An address decoder is included to select the appropriate 1K block of RAM.
3. Additional logic chips like 74LS245, 74LS373 and 74LS138 are used to interface the 8086 CPU with the memory and I/O devices.
This document provides information about the 8086 microprocessor system architecture including:
1. Block diagrams showing the connections between the 8086 MPU, memory, I/O devices and support chips.
2. Descriptions of the address/data bus, control signals, and memory/I/O interfacing.
3. Explanations of logic voltage levels, fan-out specifications and tri-state buffers for interfacing TTL devices to the 8086.
This document describes several x86 assembly language instructions used for arithmetic operations on binary-coded decimal (BCD) values. It provides examples of how ADD, ADC, SUB, SBB, DAA, DAS, AAA, and AAS instructions work when performing decimal arithmetic on packed BCD values in registers. These instructions allow adding, subtracting, and adjusting BCD values to account for decimal carry/borrow in the same way decimal arithmetic is performed on paper.
This document discusses different types of computer memory technologies including ROM, RAM, and their variants. It also provides examples of memory expansion by combining multiple memory chips. Specifically, it shows how to expand a 2Kx8 EPROM chip to larger memory sizes like 2Kx16, 4Kx8, and 8Kx16 by using multiple chips. Additionally, it demonstrates 8086 memory access for byte and word sizes using the address bus, data bus and control lines like BHE and A0.
International Upcycling Research Network advisory board meeting 4Kyungeun Sung
Slides used for the International Upcycling Research Network advisory board 4 (last one). The project is based at De Montfort University in Leicester, UK, and funded by the Arts and Humanities Research Council.
Technoblade The Legacy of a Minecraft Legend.Techno Merch
Technoblade, born Alex on June 1, 1999, was a legendary Minecraft YouTuber known for his sharp wit and exceptional PvP skills. Starting his channel in 2013, he gained nearly 11 million subscribers. His private battle with metastatic sarcoma ended in June 2022, but his enduring legacy continues to inspire millions.
Decormart Studio is widely recognized as one of the best interior designers in Bangalore, known for their exceptional design expertise and ability to create stunning, functional spaces. With a strong focus on client preferences and timely project delivery, Decormart Studio has built a solid reputation for their innovative and personalized approach to interior design.
Architectural and constructions management experience since 2003 including 18 years located in UAE.
Coordinate and oversee all technical activities relating to architectural and construction projects,
including directing the design team, reviewing drafts and computer models, and approving design
changes.
Organize and typically develop, and review building plans, ensuring that a project meets all safety and
environmental standards.
Prepare feasibility studies, construction contracts, and tender documents with specifications and
tender analyses.
Consulting with clients, work on formulating equipment and labor cost estimates, ensuring a project
meets environmental, safety, structural, zoning, and aesthetic standards.
Monitoring the progress of a project to assess whether or not it is in compliance with building plans
and project deadlines.
Attention to detail, exceptional time management, and strong problem-solving and communication
skills are required for this role.
EASY TUTORIAL OF HOW TO USE CAPCUT BY: FEBLESS HERNANEFebless Hernane
CapCut is an easy-to-use video editing app perfect for beginners. To start, download and open CapCut on your phone. Tap "New Project" and select the videos or photos you want to edit. You can trim clips by dragging the edges, add text by tapping "Text," and include music by selecting "Audio." Enhance your video with filters and effects from the "Effects" menu. When you're happy with your video, tap the export button to save and share it. CapCut makes video editing simple and fun for everyone!
PDF SubmissionDigital Marketing Institute in NoidaPoojaSaini954651
https://www.safalta.com/online-digital-marketing/advance-digital-marketing-training-in-noidaTop Digital Marketing Institute in Noida: Boost Your Career Fast
[3:29 am, 30/05/2024] +91 83818 43552: Safalta Digital Marketing Institute in Noida also provides advanced classes for individuals seeking to develop their expertise and skills in this field. These classes, led by industry experts with vast experience, focus on specific aspects of digital marketing such as advanced SEO strategies, sophisticated content creation techniques, and data-driven analytics.
Revolutionizing the Digital Landscape: Web Development Companies in Indiaamrsoftec1
Discover unparalleled creativity and technical prowess with India's leading web development companies. From custom solutions to e-commerce platforms, harness the expertise of skilled developers at competitive prices. Transform your digital presence, enhance the user experience, and propel your business to new heights with innovative solutions tailored to your needs, all from the heart of India's tech industry.
Practical eLearning Makeovers for EveryoneBianca Woods
Welcome to Practical eLearning Makeovers for Everyone. In this presentation, we’ll take a look at a bunch of easy-to-use visual design tips and tricks. And we’ll do this by using them to spruce up some eLearning screens that are in dire need of a new look.
Storytelling For The Web: Integrate Storytelling in your Design ProcessChiara Aliotta
In this slides I explain how I have used storytelling techniques to elevate websites and brands and create memorable user experiences. You can discover practical tips as I showcase the elements of good storytelling and its applied to some examples of diverse brands/projects..
Maximize Your Content with Beautiful Assets : Content & Asset for Landing Page pmgdscunsri
Figma is a cloud-based design tool widely used by designers for prototyping, UI/UX design, and real-time collaboration. With features such as precision pen tools, grid system, and reusable components, Figma makes it easy for teams to work together on design projects. Its flexibility and accessibility make Figma a top choice in the digital age.
Visual Style and Aesthetics: Basics of Visual Design
Visual Design for Enterprise Applications
Range of Visual Styles.
Mobile Interfaces:
Challenges and Opportunities of Mobile Design
Approach to Mobile Design
Patterns
2. Block Diagram of Medical Equipments
Power
supply
Input Processing Output
Device Unit Device
Control
3. • The electric power is not normally used in
the form in which it is produced or
distributed.
• Practically all electronic systems require
some form of Power conversion.
• A device that transfers electric energy
from a source to a load using electronic
circuits is referred to as power supply.
• A typical application of a power supply is
to convert utility AC voltage into regulated
DC voltages required for electronic
equipment.
4. Categories of Power Supplies
There are two broad categories of power
supplies:
• Linear regulated power supply
• switched mode power supply (SMPS)
In some cases one may use a
combination of switched mode and linear
power supplies to gain some desired
advantages of both the types.
6. • The AC voltage is connected to a transformer,
which steps that ac voltage down to the level for
the desired dc output.
• A diode rectifier then provides a full-wave
rectified voltage.
• This is initially filtered by a simple capacitor filter
to produce a dc voltage.
• This resulting dc voltage usually has some ripple
or ac voltage regulation.
• A regulator circuit can use this dc input to
provide a dc voltage that not only has much less
ripple voltage but also remains the same dc
value even if the input dc voltage varies
somewhat or the load connected to the output
dc voltage changes.
• This voltage regulation is usually obtained using
one of the voltage regulator IC units.
7.
8. Transformer
• Transformer convert
Ac electricity from one
voltage to another
with little loss of
power.
• Transformers work
only with AC & this is
one of the reasons
why mains electricity
is AC.
10. • Step-up transformers increase voltage,
step-down transformers reduce voltage.
• The input coil is called the primary & the
output coil is called the secondary.
• There is no electrical connection between
the two coils, instead they are linked by
the alternating magnetic field created in
the soft iron core of the transformer
11. • The two lines in the middle of the circuit
symbol represent the core.
• Transformers waste very little power , so
the power out is almost equal to
the power in. So, as voltage is stepped
down current is stepped up.
12.
13. RECTIFIER
• In mains supplied electronic systems the AC
input voltage must be converted into a DC
voltage with the right value & degree of
stabilization.
• Rectifier does this work.
• In other words a rectifier circuit is necessary to
convert a signal having zero average value into
one that has a nonzero average.
• Two types of rectifiers :
a. Half wave rectifier.
b. Full wave rectifier.
14.
15. • Figure above uses a center-tapped
transformer with two rectifier diodes.
• Figure below uses a simple transformer &
four rectifier diodes usually known as a
bridge rectifier.
16.
17.
18. SMOOTHING/FILTER
• We need a way to smooth out the
pulsations& get a much cleaner dc power
source for the load circuit.
• This is done by a filter circuit.
• In power supply, a filter must remove or
reduce the ac variations while still making
the desired dc available to the load
circuitry.
• Any given filter involve capacitors,
inductors,&/resistors in some combination.
19. Types of filters
• Capacitor Filter : Used to obtain
essentially a dc voltage with some ripple.
• RC Filter : It is possible to reduce the
amount of ripple across a filter capacitor
by using an additional RC filter .
• LC Filter : This reduces Hum & ripple
(Used where noise should be reduced).
20. CAPACITOR FILTER
• Smoothing is performed by a large value
electrolytic capacitor connected across the DC
supply to act as a reservoir, supplying current to
the output when the varying DC voltage from the
rectifier is falling.
• The diagram shows the unsmoothed varying DC
(dotted line) & the smoothed DC (solid line).
• The capacitor charges quickly near the peak of
the varying DC, & then discharges as it supplies
current to the output.
21. Note: The smoothing significantly increases the average
DC voltage to almost the Peak value(1.4×RMS value).
Ex: A 6V RMS AC is rectified to Dc of about 4.6V RMS,
with smoothing this increases to almost giving
1.4×4.6=6.4V smooth DC.
22. • Smoothing is not perfect due to the capacitor
falling a little as it discharges, giving a small
ripple voltage.
• For many circuits a ripple which is 10% of the
supply voltage is satisfactory & the equation
below gives the required value of the smoothing
capacitor.
C= 5×Io ÷ Vs × f
• A large capacitor will give less ripple.
• Capacitor value must be doubled when
smoothing half-wave DC.
23.
24. RC filter
In order to reduce the ripple still more , we need to extend
the filter a bit.
25. LC filter
RC filter reduces ripple voltage with lot of resistive
losses, we can replace R with L as shown below.
26. REGULATOR
• Regulator - eliminates ripple by setting DC
output to a fixed voltage
• Voltage regulator IC’s are available with fixed
(typically 5,12 &15V) or variable output voltages.
• They are also rated by the maximum current
they can pass.
• Negative voltage regulators are available, mainly
for use in dual supplies.
• Many regulators include some automatic
protection from excessive current (overload
protection) & overheating (thermal protection).
27. Many of the fixed Voltage regulator IC’s have three
leads & look like power transistors, such as shown
here.
They include a hole for attaching a heat sink if
necessary.
28. The regulated DC output is very smooth with no
ripple. It is suitable for all electronic circuits.
29. Zener diode Regulators
• For low current power supplies a simple voltage
regulator can be made with a resistor & a zener
diode connected in reverse as shown in the
diagram.
• Zener diodes are rated by their breakdown voltage
Vz & maximum power Pz.
• The resistor limits the current (like an LED resistor).
• The current through resistor is constant, so when
there is no output current all the current flows
through zener diode & its power rating must be
large enough to withstand this.
30.
31. • Choosing a zener diode and resistor:
• The zener voltage Vz is the output voltage
required
• The input voltage Vs must be a few volts
greater than Vz
(this is to allow for small fluctuations in Vs
due to ripple)
• The maximum current Imax is the output
current required plus 10%
• The zener power Pz is determined by the
maximum current: Pz > Vz × Imax
• The resistor resistance: R = (Vs - Vz) /
Imax
• The resistor power rating: P > (Vs - Vz) ×
Imax
32. • Example: output voltage required is 5V,
output current required is 60mA. Vz = 4.7V
(nearest value available)
• Vs = 8V (it must be a few volts greater than
Vz)
• Imax = 66mA (output current plus 10%)
• Pz > 4.7V × 66mA = 310mW, choose Pz =
400mW
• R = (8V - 4.7V) / 66mA = 0.05k = 50 ,
choose R = 47
• Resistor power rating P > (8V - 4.7V) ×
66mA = 218mW, choose P = 0.5W
33. DUAL SUPPLIES
• Some electronic circuits
require a power supply
with positive & negative
outputs as well zero
volts(0V).
• This is called “dual
supply” because it is like
two ordinary supplies
connected together as
shown in the figure.
• Dual supplies have three
outputs +V, 0V, -V.
39. Advantages of traditional Power
supply
• The linear regulator is the building block of
nearly every power supply used in
electronics.
• The IC linear regulator is so easy to use
that it is virtually foolproof, & so
inexpensive that it is usually one of the
cheapest components in an electronic
assembly.
40. • Power supply discussed till now are also
known as linear regulators and
maintains desired output voltage by
dissipating excess power .
• Thus for proper operation of these
supplies heat sinks are a must.
• The power dissipated by a 15V regulator
is
Power dissipated=(dropout voltage)
(current)
=(18.95-15) (0.5)=1.98W
• The power dissipated by a 5V regulator is
Power dissipated=(8.91-5) (1.0)=3.91W
41. Defects in the Traditional Power Supplies
• Efficiency is very low save 45% to 55% only,
42. • A large amount of energy is wasted.
1. Unstabilized D.C voltage / current should be
greater than the stabilized voltage / current. So,
the energy loss is in the form of heat due to the
power transistor, etc.
2. Energy loss in the form of heat etc. is in the
main transformer.
a. Due to eddy current loss.
b. Copper loss.
• The size & weight of the transformer is also
large for high current.
In transformer, number of turns is
inversely proportional to frequency.
So less frequency means more turns & high
frequency means less turns.
43. • Very large value of capacitor is needed
for reservoir for high current say 10,000
mfd to 50,000 mfd.
Similarly at low frequency, capacitor value
will be increased( so size will increase). At
high frequency, capacitor value will
decrease & hence size will also decrease.
• The low frequency ripple from the main
is always difficult to remove completely,
even large capacitors are used.
• Get shock from the chassis if
accidentally touch it.
44. Answers to many of the problems for
making high current, low
dissipation, light weight, less space
and without low frequency ripple
Is….
Switched Mode power Supply
45. • The SMPS owes its name to dc-to-dc
switching converter for conversion from
unregulated dc input to regulated dc
output voltage.
• Typical frequency range of SMPS is from
50 kHz to several MHz.
46. Requirements of SMPS
• Less bulky Transformers
• Less Energy loss / Eddy currents
• Capacitors of small size
47. Switched-mode power supply
• The input supply drawn from ac mains is first
rectified & filtered using a capacitor.
• The unregulated dc voltage across the
capacitor is then fed to a high frequency
dc- to dc converter.
• Most of the dc-to-dc converters used in
SMPS circuits have an intermediate high
frequency ac conversion stage to facilitate
the use of a high frequency transformer for
voltage scaling & isolation.
48. Block diagram of SMPS
High freq.
dc to dc converter
AC dc to ac ac to dc
converter converter
mains
49. DC to DC conversion in SMPS
• One method is to use a High frequency
transformer for voltage scaling & isolation.
• Another popular method is to use simplified
switching circuits that omits the transformer
action.
In such SMPS, the unregulated input
dc voltage is fed to a high frequency
chopping circuit which switches between
“ON” & “OFF” states.
50. Types of SMPS
SMPS can be classified into four types according
to the input & output wave forms as follows:
• AC in, DC out: rectifier, off-line converter
input stage.
• DC in, DC out: Voltage converter or
current converter, DC to DC converter.
• AC in, AC out: Frequency changer or
cyclo converter.
• DC in, AC out: Inverter
51. AC in DC out (Ordinary SMPS)
This type of power supply previously used in
TV receivers / instruments having used
the main at full voltage to provide a power
for an oscillator / inverter whose output is
in turn is fed to high frequency
transformer, then to rectifier, switcher,
stabilizer and then to regulator. The
correct of the error signal and output
signal is also done by negative feedback
loop from output to the input switch.
54. Input Rectifier
• The first stage is to convert AC input to
DC output (Rectification).
• The rectifier produces an unregulated DC
voltage which is sent to a large filter
capacitor.
• The current drawn from the mains supply
by this rectifier circuit occurs in short
pulses around the AC voltage peaks.
55. • These pulses have significant high
frequency energy which reduces the power
factor.
• Special control techniques can be
employed by the following SMPS to force
the average input current to follow the
sinusoidal shape of the AC input voltage
thus the designer should try correcting the
power factor.
56. INVERTER
• This converts DC, Whether directly from
the input or from the rectifier, to AC by
running it through a power oscillator,
whose output transformer is very small
with few windings at a frequency of tens or
hundreds of kHz.
• The frequency is usually chosen to be
above 20 kHZ, to make it inaudible to
humans.
57. OUTPUT TRANSFORMER
• If the output is required to be isolated from
input, (as is usually the case in mains
power supplies) the inverted AC is used to
drive the primary winding of a high-
frequency transformer.
• This converts the voltage up or down to
the required output level on its secondary
winding.
58. Output rectifier & filter
• If a DC output is required, the AC output from
the transformer is rectified.
• For output voltages above ten volts or so,
ordinary silicon diodes are commonly used.
• For lower voltages Schottky diodes are
commonly used as rectifier elements (they have
faster times than silicon diodes, thus allowing
low-loss operation at higher frequencies).
• For even lower output voltages, MOSFETs may
be used as synchronous rectifiers.
59. • The rectified output is then smoothed by a
filter consisting of inductors & capacitors.
• For higher switching frequencies,
components with lower capacitance &
inductance are needed.
60. Output
Control Signal
Block Diagram of Switch Mode Power Supply
Main
Voltage
Supply
Oscillator
High
frequency
transformer
Rectifying &
Smoothing Switching Smoothing
61. SMPS having opto-isolator in the
feedback loop.
15 V
Output
Control Signal Feedback Line
Block Diagram of SMPS Using Opto Isolator Transformer
Main
Supply
Inverter
Oscillator
High
Frequency
transformer
Rectifying &
Smoothing
Opto Isolator
Transformer
62. Features & drawbacks
• A lamp from output to Optocoupler.
• When Optocoupler fails, the light will fall on
the photocell, the mains will flow through
feedback circuit & reflect in output. Hence a
shock hazard.
• So, now SMPS using pulse transformer.
Feedback will have mark& space
modulation.
63. Other types of feedback loops in
SMPS
• SMPS having
isolation
transformer
(small size) in
the feedback
loop with pulse
width
modulator.
Output
Block Diagram of S.M.P.S Using Pulse Transformer
Main Supply
Pulse
Amplifier
High
Frequency
Transformer
Rectifying &
Smoothing
Pulse
Transformer
Pulse Width
Modulated
Oscillator.
64. SMPS having a single package (single
IC) is presently used for electronic
circuitry supply.
Rectifier 1
20 KHz
Switched
Mode
Voltage
Regulator
Rectifier 2
Load
T1 (20 KHz)
~ +
~ + ~ -
230 V
AC + + Regulated
Mains DC Output
Input - C1 - Voltage
~ -
Switch Mode D.C. Regulated Power Supply
66. • A particular topology may be more
suitable than others on the basis of one or
more performance criterions like cost,
efficiency, overall weight and size, output
power, output regulation, voltage ripple
etc.
• All the topologies listed above are
capable of providing isolated voltages by
incorporating a high frequency transformer
in the circuit.
67. Popular types of SMPS
Non Isolated SMPS:
• Non isolated power supplies contain an inductor
instead of a transformer. This type includes
Boost converters
Buck converters
Buck-boost converters
• These belong to the simplest class of single
input, single output converters which utilize one
inductor & one active switch (MOSFET).
68. Buck converter
• This reduces the input voltage, in direct
proportion to the ratio of the active switch “on”
time to the total switching period, called the duty
cycle.
For ex: An ideal buck converter with a 10V input
operating at a 50% duty cycle will produce an
average output voltage of 5V.
• A feed back control loop is employed to maintain
(regulate) the output voltage by varying the duty
cycle to compensate for the variations in the
input voltage.
69. Boost & Buck-boost converter
• The output voltage of a boost converter is
always greater than the input voltage.
• The buck-boost output voltage is inverted
but can be greater than, equal to, or less
than the magnitude of its input voltage.
• There are many variations & extensions to
this class of converters but these three
form the basics of almost all isolated &
non isolated DC to Dc converters.
70. Other types of SMPS
• By adding a second inductor the Cuk & SEPIC
converters can be implemented or by adding
additional active switches various bridge
converters can be realised.
• Other types of SMPSs use a capacitor-diode
voltage multiplier instead of inductors &
transformers.
• These are mostly used for generating high
voltages at low currents.
• The low voltage variant is called charge pump.
71. Chopper controller/Regulation
• A feedback circuit monitors the output voltage &
compares it with a reference voltage, which is
set manually or electronically to the desired
output.
• If there is an error in the output voltage, the
feedback circuit compensates by adjusting the
timing with which the MOSFETs are switched on
& off.
• This part of the power supply is called the
switching regulator.
72. • Depending on design/safety requirements, the
controller may or may not contain an isolation
mechanism (such as opto-couplers) to
isolate it from the DC output.
• Switching supplies in Bio-medical instruments
have these opto-couplers to tightly control the
output voltage & isolation of patient .
• Open regulators do not have a feedback circuit.
Instead, they rely on feeding a constant voltage
to the input of the transformer or inductor, &
assume that the output will be correct.
73. Advantage & disadvantage of
SMPS
Advantage:
• Greater efficiency because the switching
transistor dissipates little power in the saturated
state & the off state compared to the
semiconductor state.
• Small size & lighter weight ( elimination of low
frequency transformers)& low heat generation.
Disadvantage:
• Greater complexity
• Generation of high amplitude, high frequency
energy that a low pass filter blocks.
74. • Due to large electronic circuitry and
feedback from output to input it become
difficult to repair as compare to ordinary
Power supplies.
• The Transformer is small in size but it is
tuned to particular high frequency (20 kc/s –
50 kc/s). So, whenever the transformer
gone defective, it must be replaced with the
original one.
• The output load current / voltage must not
be more than 15% up or down the mention
standard value.
75. Application of SMPS in Biomedical
circuits
• Isolation of patients in diagnostic
instruments like ECG etc. (using opto-
couplers in control circuitry)
• SMPS battery chargers for battery based
instruments.
76. • To avoid shocks, in SMPS the input is isolated from
the output. This is achieved at two places in SMPS.
Once at mains & another at feedback using either
transformer or optocoupler.
• +ve feedback for oscillation & -ve feedback for
stabilization.
• To reduce losses, quality of transformer must be
better.
• At high frequency, no iron core will be used. Ferrite
core is used. Basically small particles of ferrite are
bound under pressure, so no shock hazard.
• Now Integrated SMPS are available in LSI & MSI
packages (1394)
78. Comparison of LPS & SMPS
• Unlike a linear power supply, the pass transistor of
a switching mode supply switches very quickly
(typically between 50 kHz and 1 MHz) between
full-on and full-off states, which minimizes wasted
energy. Voltage regulation is provided by varying
the ratio of on to off time. In contrast, a linear
power supply must dissipate the excess voltage to
regulate the output. This higher efficiency is the
chief advantage of a switched-mode power supply.
• Switching regulators are used as replacements for
the linear regulators when higher efficiency,
smaller size or lighter weight are required. They
are, however, more complicated, their switching
currents can cause electrical noise problems if not
carefully suppressed,
81. • SMPS is an electronic power supply unit
(PSU) that incorporates a switching
regulator.
• A linear regulator maintains the desired
output voltage by dissipating excess
power in a “pass” power transistor, the
SMPS rapidly switches a power transistor
between saturation (full on) & cut off
(completely off) with a variable duty cycle
whose average is the desired output
voltage.
• The resulting rectangular waveform is low-
pass filtered with an inductor & capacitor.