Solar Thermal Electricity (STE) uses mirrors to concentrate sunlight and heat a working fluid like water or salts to high temperatures. This thermal energy can be used to generate electricity through a thermodynamic cycle. STE has advantages over other renewables like photovoltaics and wind in that it is predictable, dispatchable through thermal energy storage, provides grid stability, and has potential for cost competitiveness. The solar thermal industry aims to improve technologies to increase efficiency and reduce costs to achieve electricity generation costs savings of up to 50% by 2035 through technological improvements, economies of scale, and deployment in high solar radiation regions.
Solar Thermal Power Plant with Thermal Storage - Ignacio Burgaleta (Torresol ...IrSOLaV Pomares
Torresol Energy operates several solar thermal power plants in Spain that use parabolic trough collectors and central tower technology. These plants include molten salt storage systems to allow electricity production when the sun is not shining. The document discusses Torresol Energy's experience with molten salt storage, including the advantages it provides in improving plant efficiency and enabling dispatchable solar power. It also describes the components and operation of the company's 50 MW parabolic trough plant with 7 hours of thermal storage. Accurate forecasting of solar irradiance and clouds is important for optimizing plant operations and grid integration of the solar power.
This document provides a project report on a hybrid chimney. It includes an acknowledgment section thanking those who supported and guided the project. It also includes a bonafide certificate confirming the students completed the project work under supervision. The abstract explains that a solar thermal hybrid chimney combines solar heating, the greenhouse effect, and wind turbines to generate electricity from sunlight and airflow. It is a simple concept that uses solar heating to generate airflow up a chimney and spins turbines to convert the kinetic energy to electricity.
This document summarizes different methods of solar power generation and storage. It describes concentrated solar power technologies like parabolic troughs, solar power towers, and Stirling dishes that generate heat from sunlight. Photovoltaics that directly convert sunlight to electricity and solar cell technology are also discussed. The advantages of solar power are outlined as well as energy storage methods like molten salts and batteries that allow solar power to be used when the sun is not shining.
Solar thermal power plants use mirrors to concentrate sunlight and generate heat, which produces steam to drive turbines for electricity generation. There are two main types of solar thermal systems: passive systems that rely on design for heat capture, and active systems that require equipment to absorb, collect, and store solar energy. Common active solar thermal power plant designs include parabolic trough systems, solar power towers, solar dishes/engines, and compact linear Fresnel reflectors. While solar thermal has advantages like no fuel costs and renewable energy, challenges include high installation costs and developing efficient energy storage solutions.
This document discusses power generation from solar thermal plants. It describes how solar thermal energy collectors are classified as low, medium, or high temperature based on their use. Low temperature collectors are used to heat pools, medium for water and air heating, and high temperature concentrate sunlight for electricity production. Heat is collected, stored, and transferred for power generation during the day and at night. Conversion rates from solar to electrical energy are highest for dish/Stirling systems at 31.25% and around 20% for trough and Fresnel systems. Applications include residential and commercial water and space heating.
This ppt represents the study of solar power tower as well as continuing technology development, in order to update the
technical and economical status of molten-salt solar power tower. It has endeavoured to explain the solar power tower
with an overview of energy, form of energy, what is renewable energy, solar energy, and solar thermal. The second section discusses History of solar power tower development. The third section presents progression from solar one to solar Two. The fifth section details of the molten-salt – what is molten-salt and its properties. The sixth section details of components of solar power tower- Heliostat system, receiver system, thermal storage system, steam generator system and electric generation system. In seventh section discuss about advantage of solar power tower. The opportunity in India of this concept has discussed in eighth section. The ninth section discusses various research and development of solar components. In final Section summarize the successes of solar power tower and current technology development activities.
Concentrated Solar Power Course - Session 1 : FundamentalsLeonardo ENERGY
Lesson 1 : Fundamentals of concentrating solar thermal power
In this session, the contents will focus on the physical and thermodynamic basis of Concentrated Solar Power:
* High temperature solar-thermal conversion, limits to the concentration of solar radiation and description of the main concentrating technologies.
* Solar thermal power plants: concept, background, general configuration and main typologies of solar thermal power plants.
Solar power plants can generate electricity either directly using photovoltaic cells or indirectly using concentrated solar power that heats a liquid to power steam turbines. Concentrated solar power systems use lenses or mirrors to focus sunlight and heat a liquid for steam generation. Photovoltaic cells convert sunlight directly into electricity through the photovoltaic effect. Solar power has advantages of no fuel costs or pollution but higher initial costs than other technologies.
Solar Thermal Power Plant with Thermal Storage - Ignacio Burgaleta (Torresol ...IrSOLaV Pomares
Torresol Energy operates several solar thermal power plants in Spain that use parabolic trough collectors and central tower technology. These plants include molten salt storage systems to allow electricity production when the sun is not shining. The document discusses Torresol Energy's experience with molten salt storage, including the advantages it provides in improving plant efficiency and enabling dispatchable solar power. It also describes the components and operation of the company's 50 MW parabolic trough plant with 7 hours of thermal storage. Accurate forecasting of solar irradiance and clouds is important for optimizing plant operations and grid integration of the solar power.
This document provides a project report on a hybrid chimney. It includes an acknowledgment section thanking those who supported and guided the project. It also includes a bonafide certificate confirming the students completed the project work under supervision. The abstract explains that a solar thermal hybrid chimney combines solar heating, the greenhouse effect, and wind turbines to generate electricity from sunlight and airflow. It is a simple concept that uses solar heating to generate airflow up a chimney and spins turbines to convert the kinetic energy to electricity.
This document summarizes different methods of solar power generation and storage. It describes concentrated solar power technologies like parabolic troughs, solar power towers, and Stirling dishes that generate heat from sunlight. Photovoltaics that directly convert sunlight to electricity and solar cell technology are also discussed. The advantages of solar power are outlined as well as energy storage methods like molten salts and batteries that allow solar power to be used when the sun is not shining.
Solar thermal power plants use mirrors to concentrate sunlight and generate heat, which produces steam to drive turbines for electricity generation. There are two main types of solar thermal systems: passive systems that rely on design for heat capture, and active systems that require equipment to absorb, collect, and store solar energy. Common active solar thermal power plant designs include parabolic trough systems, solar power towers, solar dishes/engines, and compact linear Fresnel reflectors. While solar thermal has advantages like no fuel costs and renewable energy, challenges include high installation costs and developing efficient energy storage solutions.
This document discusses power generation from solar thermal plants. It describes how solar thermal energy collectors are classified as low, medium, or high temperature based on their use. Low temperature collectors are used to heat pools, medium for water and air heating, and high temperature concentrate sunlight for electricity production. Heat is collected, stored, and transferred for power generation during the day and at night. Conversion rates from solar to electrical energy are highest for dish/Stirling systems at 31.25% and around 20% for trough and Fresnel systems. Applications include residential and commercial water and space heating.
This ppt represents the study of solar power tower as well as continuing technology development, in order to update the
technical and economical status of molten-salt solar power tower. It has endeavoured to explain the solar power tower
with an overview of energy, form of energy, what is renewable energy, solar energy, and solar thermal. The second section discusses History of solar power tower development. The third section presents progression from solar one to solar Two. The fifth section details of the molten-salt – what is molten-salt and its properties. The sixth section details of components of solar power tower- Heliostat system, receiver system, thermal storage system, steam generator system and electric generation system. In seventh section discuss about advantage of solar power tower. The opportunity in India of this concept has discussed in eighth section. The ninth section discusses various research and development of solar components. In final Section summarize the successes of solar power tower and current technology development activities.
Concentrated Solar Power Course - Session 1 : FundamentalsLeonardo ENERGY
Lesson 1 : Fundamentals of concentrating solar thermal power
In this session, the contents will focus on the physical and thermodynamic basis of Concentrated Solar Power:
* High temperature solar-thermal conversion, limits to the concentration of solar radiation and description of the main concentrating technologies.
* Solar thermal power plants: concept, background, general configuration and main typologies of solar thermal power plants.
Solar power plants can generate electricity either directly using photovoltaic cells or indirectly using concentrated solar power that heats a liquid to power steam turbines. Concentrated solar power systems use lenses or mirrors to focus sunlight and heat a liquid for steam generation. Photovoltaic cells convert sunlight directly into electricity through the photovoltaic effect. Solar power has advantages of no fuel costs or pollution but higher initial costs than other technologies.
Historic and recent progress in solar chimney power plant enhancing technologiesfirmanfds
This document discusses efforts to enhance the performance of solar chimney power plants (SCPPs). SCPPs have low efficiency of less than 2% due to multiple energy conversions, from solar energy to thermal to kinetic to mechanical to electrical. The document reviews the history and components of SCPPs. It then summarizes numerous attempts that have been reported to improve system performance through more efficient solar collection, chimney design, power generation, and thermal energy storage integration to reduce dependence on direct sunlight. The document provides a comprehensive review of enhancing technologies for SCPPs and suggests that performance could be significantly improved through such solutions.
Concentrating solar thermal technology (1)Urval Chotalia
Concentrating solar thermal technology uses mirrors or lenses to concentrate sunlight onto receivers that collect solar energy and convert it to heat. This heat can then be used to produce electricity via a steam turbine or for other industrial processes. The four main concentrating solar thermal technologies are parabolic troughs, linear Fresnel reflectors, power towers, and parabolic dishes. Concentrating solar thermal power has the benefits of being environmentally friendly, having potential for thermal energy storage, and providing dispatchable power.
The document discusses solar power towers, which use an array of flat, movable mirrors called heliostats to focus sunlight on a central collector tower. The concentrated sunlight heats a fluid in the tower that is used to generate steam and power a turbine, producing electricity. Several early solar power tower projects from the 1980s-1990s are described that varied in size from 0.5-10 MW and used different heat transfer fluids and storage media. The technology has advantages of being easy to operate, environmentally friendly, and having falling costs as renewable energy.
Energy is the driving force for almost everything including the economy, society and technology all around the world. This makes energy generation an important and ever increasing responsibility.environmental problems. The burning of fossil resources factors the release of carbon dioxide (CO2) that accumulates in the surroundings a greenhouse gas (GHG) which might alternate the steadiness of global local weather. In order that many study are interested for renewable power in their one-of-a-kind forms thermal, photovoltaic, hydro, biomass and geothermal.Solar rays are an inexhaustible source of energy during the sector. It is used in quite a lot of functions as a supply of easy and renewable energy. Amongst this solar thermal applications comprise electrical power new release. This paper experiences the electrical energy iteration from solar thermal energy established especially on parabolic trough, linear fresnal reflector, barabolic dish and so forth. Examples of solar thermal power vegetation will likely be discussed on this paper. This paper also offers with the concentrated solar power (CSP). Rahul Verma | Dr. Deepika Chauhan"Solar and Thermal Power Generation" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-3 , April 2018, URL: http://www.ijtsrd.com/papers/ijtsrd11190.pdf http://www.ijtsrd.com/engineering/electrical-engineering/11190/solar-and-thermal-power-generation/rahul-verma
Concentrating solar power (CSP) harnesses the sun's energy through technologies like parabolic troughs, power towers, and thermal energy storage. It can generate electricity even when the sun is not shining by storing solar energy as heat. CSP is well-suited for areas with abundant sunlight like India's deserts and is a key technology for providing renewable energy at scale. While CSP projects are currently capital intensive, ongoing research and larger deployments are expected to drive down costs and allow CSP to compete with traditional power sources.
Presentation from the New Mexico Regional Energy Storage & Grid Integration Workshop: Concentrating Solar Power and Thermal Energy Storage, presented by Clifford Ho, Sandia National Laboratories, August 23-24, 2016.
The document summarizes concentrated solar power (CSP) technology. It discusses four main CSP designs - parabolic troughs, tower systems, linear troughs, and parabolic dishes. Parabolic troughs are the most common currently, making up over 90% of installed CSP generation capacity. Tower systems are expected to become more widely used. Molten salt is highlighted as an important development, allowing CSP plants to operate at higher temperatures and efficiencies while enabling thermal energy storage for electricity generation after sunset or when solar irradiance is low.
Very, VERY dry material, I'm afraid. We were asked to teach a chapter of the text book. I did this presentation, and found it difficult even using PowerPoint to keep in interesting and streamlined enough to keep people awake. But the pictures are pretty, and I made the design template myself using modified clipart. :o)
Concentrated solar power in India - an evaluationSindhu Maiyya
Work done as a part of internship with Energy Alternatives India. A researched insight into India as an investment site for concentrated solar power generation. Technology explained along with pros, cons, and market conditions.
The document discusses solar thermal energy technology and its advantages over photovoltaic and fossil fuel energy sources. Solar thermal uses concentrated sunlight to create heat that can power steam turbines or engines to generate electricity, allowing for efficient heat storage. Major players like eSolar, Brightsource, and Abengoa plan to beat the price of coal-generated power and expand solar thermal projects around the world. While the technology faces challenges of land use and competition with cheap coal, further technological improvements could allow solar thermal energy to become more economical and competitive on a large scale.
CONCENTRATED SOLAR THERMAL POWER GENERATIONKrishan Yadav
Concentrated solar thermal power generation uses mirrors to collect and concentrate sunlight to produce steam and drive turbines to generate electricity. It has several advantages over photovoltaic solar generation including the ability to store thermal energy for generating electricity when the sun is not shining. The document discusses the history and development of concentrated solar thermal technology. It describes the basic working principle and four main types - parabolic trough, power tower, solar dish, and Fresnel reflectors. Advantages include no fuel costs and ability to generate power 24/7 with thermal storage, while disadvantages are high initial costs and large land requirements. The current global installed capacity is around 4.8 GW with India's first plant coming online in 2013 with a planned
Concentrated solar power systems use mirrors to focus sunlight and heat a fluid to produce steam that drives turbines to generate electricity. There are three main types: linear concentrators use curved mirrors to heat fluid in tubes; dish/engine systems use mirrored dishes to concentrate sunlight onto receivers connected to Stirling engines; and power tower systems use many heliostat mirrors to focus sunlight onto a receiver at the top of a tower to heat a fluid and produce steam. Concentrated solar power is advantageous because it is non-polluting, can displace fossil fuel plants, and is efficient and cost-effective to deploy relatively quickly to reduce carbon emissions compared to natural gas systems. Ideal places for concentrated solar power include desert regions of Australia and Africa
As unlimited resources, sunlight can be a key to overcoming climate change. The sun irradiance onto Earth is adequate to provide the world energy needs for an entire year. Despite its abundant potential, the solar energy only provides less than one-tenth of one percent of global energy use. This untapped potential will bring an enormous impact both on the environment and the economy if used effectively.
The solar energy can be harvested with photovoltaic technology and solar thermal energy technology. The concentrated solar power (CSP) has been mainly used in the solar thermal energy technology. The concentrated solar power (CSP) types that have been used in the power plant projects around the world are the parabolic trough, solar power tower, Fresnel reflectors, and dish Stirling. This paper will explore some of the largest CSP plants in the world.
Keyword: solar thermal energy, concentrated solar power, parabolic trough, solar power tower, Fresnel reflectors, dish Stirling.
This document discusses solar thermal systems and their components. It describes how solar thermal systems work to convert sunlight into heat that can be used for heating water, pools, and spaces. The key components are solar collectors, storage technology, and a regulator system. Solar collectors absorb sunlight and transfer the heat to a fluid to transport it for use. There are different types of collectors and two main types of solar thermal systems: one for domestic hot water and one for supplementary space heating. Passive and active solar systems are discussed for space heating applications.
There are three primary solar energy technologies: photovoltaics (PV) which convert sunlight directly into electricity, concentrating solar power (CSP) which uses sunlight to drive steam turbines and generate electricity, and solar heating and cooling systems which collect thermal energy from the sun to provide hot water and air conditioning. PV modules use semiconductors to strip electrons from their atomic bonds when struck by sunlight, producing an electric current without any moving parts. CSP plants use mirrors to concentrate thermal energy and power steam turbines. Solar heating and cooling technologies include various collectors to provide hot water and regulate building temperatures.
Final Report - CFD Analysis on AerodynamicJermaine Amaze
This document discusses a computational fluid dynamics (CFD) analysis of the aerodynamic properties of surface roughness on a rugby ball. Rugby balls have an ellipsoid shape unlike most spherical sports balls. There is little existing research on the aerodynamics of rugby balls. The study aims to use CFD simulations at different wind speeds and yaw angles to better understand the airflow and aerodynamic characteristics of a rugby ball. Solidworks Flow Simulation will be used to model a rugby ball, apply varying wind conditions, and calculate coefficients like drag to analyze the results.
Flat plate collectors are the most common type of solar collector and consist of an absorber plate, transparent cover, heat transport fluid, and insulation. Integral collector storage employs oversized piping or channels within the collector to increase thermal storage capacity without an external tank. Evacuated tube collectors use heat pipes or direct flow of liquid through glass tubes to transfer heat to a fluid in an insulated manifold. Solar air collectors directly heat air for applications like space heating using glazed or unglazed absorber plates.
Historic and recent progress in solar chimney power plant enhancing technologiesfirmanfds
This document discusses efforts to enhance the performance of solar chimney power plants (SCPPs). SCPPs have low efficiency of less than 2% due to multiple energy conversions, from solar energy to thermal to kinetic to mechanical to electrical. The document reviews the history and components of SCPPs. It then summarizes numerous attempts that have been reported to improve system performance through more efficient solar collection, chimney design, power generation, and thermal energy storage integration to reduce dependence on direct sunlight. The document provides a comprehensive review of enhancing technologies for SCPPs and suggests that performance could be significantly improved through such solutions.
Concentrating solar thermal technology (1)Urval Chotalia
Concentrating solar thermal technology uses mirrors or lenses to concentrate sunlight onto receivers that collect solar energy and convert it to heat. This heat can then be used to produce electricity via a steam turbine or for other industrial processes. The four main concentrating solar thermal technologies are parabolic troughs, linear Fresnel reflectors, power towers, and parabolic dishes. Concentrating solar thermal power has the benefits of being environmentally friendly, having potential for thermal energy storage, and providing dispatchable power.
The document discusses solar power towers, which use an array of flat, movable mirrors called heliostats to focus sunlight on a central collector tower. The concentrated sunlight heats a fluid in the tower that is used to generate steam and power a turbine, producing electricity. Several early solar power tower projects from the 1980s-1990s are described that varied in size from 0.5-10 MW and used different heat transfer fluids and storage media. The technology has advantages of being easy to operate, environmentally friendly, and having falling costs as renewable energy.
Energy is the driving force for almost everything including the economy, society and technology all around the world. This makes energy generation an important and ever increasing responsibility.environmental problems. The burning of fossil resources factors the release of carbon dioxide (CO2) that accumulates in the surroundings a greenhouse gas (GHG) which might alternate the steadiness of global local weather. In order that many study are interested for renewable power in their one-of-a-kind forms thermal, photovoltaic, hydro, biomass and geothermal.Solar rays are an inexhaustible source of energy during the sector. It is used in quite a lot of functions as a supply of easy and renewable energy. Amongst this solar thermal applications comprise electrical power new release. This paper experiences the electrical energy iteration from solar thermal energy established especially on parabolic trough, linear fresnal reflector, barabolic dish and so forth. Examples of solar thermal power vegetation will likely be discussed on this paper. This paper also offers with the concentrated solar power (CSP). Rahul Verma | Dr. Deepika Chauhan"Solar and Thermal Power Generation" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-3 , April 2018, URL: http://www.ijtsrd.com/papers/ijtsrd11190.pdf http://www.ijtsrd.com/engineering/electrical-engineering/11190/solar-and-thermal-power-generation/rahul-verma
Concentrating solar power (CSP) harnesses the sun's energy through technologies like parabolic troughs, power towers, and thermal energy storage. It can generate electricity even when the sun is not shining by storing solar energy as heat. CSP is well-suited for areas with abundant sunlight like India's deserts and is a key technology for providing renewable energy at scale. While CSP projects are currently capital intensive, ongoing research and larger deployments are expected to drive down costs and allow CSP to compete with traditional power sources.
Presentation from the New Mexico Regional Energy Storage & Grid Integration Workshop: Concentrating Solar Power and Thermal Energy Storage, presented by Clifford Ho, Sandia National Laboratories, August 23-24, 2016.
The document summarizes concentrated solar power (CSP) technology. It discusses four main CSP designs - parabolic troughs, tower systems, linear troughs, and parabolic dishes. Parabolic troughs are the most common currently, making up over 90% of installed CSP generation capacity. Tower systems are expected to become more widely used. Molten salt is highlighted as an important development, allowing CSP plants to operate at higher temperatures and efficiencies while enabling thermal energy storage for electricity generation after sunset or when solar irradiance is low.
Very, VERY dry material, I'm afraid. We were asked to teach a chapter of the text book. I did this presentation, and found it difficult even using PowerPoint to keep in interesting and streamlined enough to keep people awake. But the pictures are pretty, and I made the design template myself using modified clipart. :o)
Concentrated solar power in India - an evaluationSindhu Maiyya
Work done as a part of internship with Energy Alternatives India. A researched insight into India as an investment site for concentrated solar power generation. Technology explained along with pros, cons, and market conditions.
The document discusses solar thermal energy technology and its advantages over photovoltaic and fossil fuel energy sources. Solar thermal uses concentrated sunlight to create heat that can power steam turbines or engines to generate electricity, allowing for efficient heat storage. Major players like eSolar, Brightsource, and Abengoa plan to beat the price of coal-generated power and expand solar thermal projects around the world. While the technology faces challenges of land use and competition with cheap coal, further technological improvements could allow solar thermal energy to become more economical and competitive on a large scale.
CONCENTRATED SOLAR THERMAL POWER GENERATIONKrishan Yadav
Concentrated solar thermal power generation uses mirrors to collect and concentrate sunlight to produce steam and drive turbines to generate electricity. It has several advantages over photovoltaic solar generation including the ability to store thermal energy for generating electricity when the sun is not shining. The document discusses the history and development of concentrated solar thermal technology. It describes the basic working principle and four main types - parabolic trough, power tower, solar dish, and Fresnel reflectors. Advantages include no fuel costs and ability to generate power 24/7 with thermal storage, while disadvantages are high initial costs and large land requirements. The current global installed capacity is around 4.8 GW with India's first plant coming online in 2013 with a planned
Concentrated solar power systems use mirrors to focus sunlight and heat a fluid to produce steam that drives turbines to generate electricity. There are three main types: linear concentrators use curved mirrors to heat fluid in tubes; dish/engine systems use mirrored dishes to concentrate sunlight onto receivers connected to Stirling engines; and power tower systems use many heliostat mirrors to focus sunlight onto a receiver at the top of a tower to heat a fluid and produce steam. Concentrated solar power is advantageous because it is non-polluting, can displace fossil fuel plants, and is efficient and cost-effective to deploy relatively quickly to reduce carbon emissions compared to natural gas systems. Ideal places for concentrated solar power include desert regions of Australia and Africa
As unlimited resources, sunlight can be a key to overcoming climate change. The sun irradiance onto Earth is adequate to provide the world energy needs for an entire year. Despite its abundant potential, the solar energy only provides less than one-tenth of one percent of global energy use. This untapped potential will bring an enormous impact both on the environment and the economy if used effectively.
The solar energy can be harvested with photovoltaic technology and solar thermal energy technology. The concentrated solar power (CSP) has been mainly used in the solar thermal energy technology. The concentrated solar power (CSP) types that have been used in the power plant projects around the world are the parabolic trough, solar power tower, Fresnel reflectors, and dish Stirling. This paper will explore some of the largest CSP plants in the world.
Keyword: solar thermal energy, concentrated solar power, parabolic trough, solar power tower, Fresnel reflectors, dish Stirling.
This document discusses solar thermal systems and their components. It describes how solar thermal systems work to convert sunlight into heat that can be used for heating water, pools, and spaces. The key components are solar collectors, storage technology, and a regulator system. Solar collectors absorb sunlight and transfer the heat to a fluid to transport it for use. There are different types of collectors and two main types of solar thermal systems: one for domestic hot water and one for supplementary space heating. Passive and active solar systems are discussed for space heating applications.
There are three primary solar energy technologies: photovoltaics (PV) which convert sunlight directly into electricity, concentrating solar power (CSP) which uses sunlight to drive steam turbines and generate electricity, and solar heating and cooling systems which collect thermal energy from the sun to provide hot water and air conditioning. PV modules use semiconductors to strip electrons from their atomic bonds when struck by sunlight, producing an electric current without any moving parts. CSP plants use mirrors to concentrate thermal energy and power steam turbines. Solar heating and cooling technologies include various collectors to provide hot water and regulate building temperatures.
Final Report - CFD Analysis on AerodynamicJermaine Amaze
This document discusses a computational fluid dynamics (CFD) analysis of the aerodynamic properties of surface roughness on a rugby ball. Rugby balls have an ellipsoid shape unlike most spherical sports balls. There is little existing research on the aerodynamics of rugby balls. The study aims to use CFD simulations at different wind speeds and yaw angles to better understand the airflow and aerodynamic characteristics of a rugby ball. Solidworks Flow Simulation will be used to model a rugby ball, apply varying wind conditions, and calculate coefficients like drag to analyze the results.
Flat plate collectors are the most common type of solar collector and consist of an absorber plate, transparent cover, heat transport fluid, and insulation. Integral collector storage employs oversized piping or channels within the collector to increase thermal storage capacity without an external tank. Evacuated tube collectors use heat pipes or direct flow of liquid through glass tubes to transfer heat to a fluid in an insulated manifold. Solar air collectors directly heat air for applications like space heating using glazed or unglazed absorber plates.
The document discusses the aerodynamics of cars. Aerodynamics is the study of how air flows over objects in motion and how it affects the object. Aerodynamic devices on cars help make them more fuel efficient and safer by reducing drag. Devices like front air dams, under trays, and roof scoops work according to Bernoulli's principle to generate downforce which pushes the car onto the road for better handling without increasing drag and decreasing top speed. Overall, aerodynamic designs help improve car performance by optimizing downforce generation and drag reduction.
Solar Photovoltaic/Thermal Hybrid System: Seminar TopicKaran Prajapati
Solar Photovoltaic and Thermal hybrid system helps in optimizing the efficiency of solar pv panel by extracting the heat from the surface of PV module. So, we get electrical and thermal efficiency as product. Normally, water or air is used as working fluid. The seminar topic i.e. this presentation have literature reviews on four main research papers and respective major findings from them. I would recommend the viewers to download the presentation because there is resolution problem while viewing on this website.
The detailed report of this presentation can be seen at :- https://dx.doi.org/10.13140/RG.2.1.1435.3443
Concentrated Solar Power Technologies (CSP)swapnil_energy
Analysis of Concentrated solar power (CSP) or Solar Thermal (STH) technologies with focus on its technology assessment, financials, challenge areas and solar market scenario
Solar thermal power generation systems use mirrors to collect sunlight and produce steam by solar heat to drive turbines for generating power. This system generates power by rotating turbines like thermal and nuclear power plants, and therefore, is suitable for large-scale power generation.
Kaushik Kishore submitted a seminar report on solar power towers. The report provides details on how solar power towers work, including focusing sunlight with heliostats onto a tower-mounted receiver to heat a working fluid like oil or molten salt. The heated fluid is then used to generate steam and power a turbine generator. Key advantages are the ability to store thermal energy for nighttime or cloudy conditions and generate electricity without emissions. Large solar power towers could provide 200MW of power but require significant land area and precise engineering for the tall tower structure.
National Conference on Emerging Science and TechnologyMUNEER KHAN
This paper contain the recent advancements in the Renewable energy production, modelling
and optimization of the renewable energy system. A classification of energy sources is presented in terms of
their sustainability and ease of integration to a energy system. Current modelling methods are further
compared with respect to computational limitations, level of precision as well as the degree of certainty in the
output level. Moreover, the recent studies of Renewable energy systems are classified in accordance with the
optimization objectives, including energy efficiency, cost, exergo-economic/thermo-economic and green-house
gas (GHG) and pollutant production.
IRJET- Ameliorate the Performance of PV Module by Inventing Heat Dissipat...IRJET Journal
This document describes a study that aimed to develop a passive heat dissipation system to improve the performance of photovoltaic (PV) modules. PV module efficiency decreases with higher temperatures, as heat absorbed from solar irradiation is not easily dissipated. The researchers designed a system using aluminum heat sinks attached to the back of a PV module with thermal grease. Testing showed that with the heat dissipation system in place, the module's average power output increased by 2.96% over two days of testing compared to without the system, demonstrating that it successfully reduced the module temperature and improved efficiency as intended.
1) The document presents a project on solar air conditioning by six students guided by an assistant professor.
2) It aims to provide pollution-free refrigeration using solar energy to minimize environmental impact and fuel costs.
3) The key components are solar panels, a compressor, condenser, expansion valve, and evaporator. Solar energy is converted to electricity to power the vapor compression refrigeration cycle.
IRJET- Rankine Cycle Coupled with Heliostat Solar Receiver; A ReviewIRJET Journal
This document reviews the Rankine cycle coupled with a heliostat solar receiver for concentrated solar power generation. It begins with an introduction explaining why this system is being studied, noting the global energy crisis and need to transition from conventional to renewable energy sources. It then provides background on concentrated solar power technology, describing the main components of heliostats to direct sunlight to a central receiver on a tower, where the heat is used to power a Rankine cycle for electricity generation. The document reviews the literature on this system and provides details on how it works and the advantages it provides over conventional energy sources.
Solar thermal power plants concentrate solar energy using mirrors onto absorbers to heat a working fluid. This heated fluid can then power a turbine like in a conventional power plant. Three main technologies exist: parabolic troughs, central receivers (towers), and parabolic dishes. Parabolic troughs are the most mature with over 350 MW of commercial plants built in California in the 1980s. The document discusses the potential, achievements and barriers of solar thermal power, particularly in Europe, with a goal of deploying over 7 GW by 2015 to reduce CO2 emissions. Research aims to further reduce costs to make solar competitive with fossil fuels.
IRJET-Review on Solar Thermal and Photovoltaic Energy SystemIRJET Journal
This document summarizes and compares solar thermal and photovoltaic energy systems. Solar thermal systems indirectly generate electricity by using solar collectors to heat a liquid or gas, then converting the heat to electricity. Concentrated solar power is a type of solar thermal that uses tracking mechanisms to focus sunlight and achieve higher temperatures and efficiencies. Photovoltaic systems directly convert sunlight into electricity using solar panels without heat exchange. While photovoltaic systems have higher energy production, even at low light levels, their limitation is lack of cost-effective electricity storage. Solar thermal systems allow for thermal energy storage at low cost and therefore can provide dispatchable electricity production. Both systems show potential but differ in energy conversion methods and ability to store excess energy
Self Electricity Generation and Energy Saving By Solar Using Programmable Sys...theijes
The International Journal of Engineering & Science is aimed at providing a platform for researchers, engineers, scientists, or educators to publish their original research results, to exchange new ideas, to disseminate information in innovative designs, engineering experiences and technological skills. It is also the Journal's objective to promote engineering and technology education. All papers submitted to the Journal will be blind peer-reviewed. Only original articles will be published.
The papers for publication in The International Journal of Engineering& Science are selected through rigorous peer reviews to ensure originality, timeliness, relevance, and readability.
Theoretical work submitted to the Journal should be original in its motivation or modeling structure. Empirical analysis should be based on a theoretical framework and should be capable of replication. It is expected that all materials required for replication (including computer programs and data sets) should be available upon request to the authors.
The International Journal of Engineering & Science would take much care in making your article published without much delay with your kind cooperation.
1) The document presents a performance analysis methodology developed for a parabolic dish solar concentrator (PDSC) system used for heating a thermic fluid for industrial process heating applications.
2) Key parameters that affect the performance of a PDSC system include design specifications, measured operating parameters, calculated parameters, and solar radiation geometry which depends on location.
3) The performance analysis methodology examines the role of each of these parameter types to evaluate a PDSC system's performance.
Performance Analysis Methodology for Parabolic Dish Solar Concentrators for P...IOSR Journals
1) The document presents a performance analysis methodology developed for a parabolic dish solar concentrator (PDSC) system used for heating a thermic fluid for industrial process heating applications.
2) Key parameters that affect the performance of a PDSC system include design specifications, measured operating parameters, calculated parameters, and solar radiation geometry which depends on location.
3) The performance analysis methodology examines the role of each of these parameter types to evaluate a PDSC system's performance.
Review of solar photovoltaic/thermal (PV/T) air collectorIJECEIAES
Growing concern with regard to energy sources and their usage has consequently increased significance of photovoltaic thermal (PV/T) collectors. A PV/T air collector is a system which has a conventional PV system combined with a thermal collector system. The system is able to produce electrical energy directly converted from sunlight by using photoelectric effect. Meanwhile, it also extracts heat from the PV and warms the fluid (air flow) inside the collector. In this review, solar PV system and solar thermal collectors are presented. In addition, studies conducted on solar PV/T air collectors are reviewed. The development of PV/T air collectors is a very promising area of research. PV/T air collectors using in solar drying and solar air heater.
IRJET- Solar Energy: Potential and Policies of IndiaIRJET Journal
This document discusses the potential and policies of solar energy in India. It begins by stating that solar energy is playing an important role in meeting electrical energy demands as conventional fuel sources decline. Photovoltaic installations use solar panels to generate electricity in a cost-effective way from sunlight. However, the use and effectiveness of solar energy systems in India remains limited. The document then reviews India's solar energy policies and incentives to promote renewable energy sources. It also discusses technological challenges and the need for continued innovation to improve the output and widespread adoption of solar energy systems in India.
Hybrid Photovoltaic and thermoelectric systems more effectively converts solar energy into electrical energy. Two sources of energy are used one of the energy is solar,that converts radiant light into electrical energy and heat energy which will convert heat into electricity.Photovoltaic cells and thermoelectric modules are used to capture and convert the energy into electricity.Furthermore solar-thermoelectric hybrid system is environmental friendly and has no harmful emissions.Solar-thermoelectric hybrid system increases the overall reliability without sacrificing the quality of power generated.In this paper an overview of the previous research and development of technological advancement in the solar-thermoelectric hybrid systems is presented.
This document provides an overview and comparative analysis of different solar energy technologies, including photovoltaics (PV), concentrated photovoltaics (CPV), solar thermal technologies, and solar chimneys. It discusses the installed capacity and levelized cost of energy for each technology. PV capacity has grown significantly from 2004-2014, with total capacity reaching 177GW in 2014. Solar thermal capacity has also increased substantially over this period, reaching 4.4GW globally by the end of 2014. While solar chimneys remain experimental, the first 50MW plant is scheduled for completion in India in 2017. The document analyzes the technical and economic feasibility of these solar technologies as alternatives to fossil fuels.
Redesign and Fabrication of Solar Power Tower using CAD and FEM AnalysisIJMER
The solar power tower (also known as 'Central Tower' power plants or 'Heliostat' power
plants or power towers) is a type of solar furnace using a tower to receive the focused sunlight. It uses
an array of flat, moveable mirrors (called heliostats) to focus the sun's rays upon a collector tower (the
target). The high energy at this point of concentrated sunlight is transferred to a substance that can store
the heat for later use. The more recent heat transfer material that has been successfully demonstrated is
liquid sodium. Sodium is a metal with a high heat capacity, allowing that energy to be stored and drawn
off throughout the evening. That energy can, in turn, be used to boil water for use in steam turbines.
Water had originally been used as a heat transfer medium in earlier power tower versions (where the
resultant steam was used to power a turbine). This system did not allow for power generation during the
evening
Solar power plants harness energy from the sun and convert it to electricity through one of two processes: photovoltaic cells that directly convert sunlight to electricity, or solar-thermal systems that use mirrors to heat a liquid and create steam to power turbines. The Philippines has good solar resources, especially in the sunbelt between 20 degrees north and south of the equator. While initial costs of solar power plants can be high, maintenance costs are low and they produce no air or water pollution or greenhouse gases during operation. Some impacts include resource use and pollution during manufacturing and potential effects on local ecosystems.
The document examines different possibilities for installing and orienting solar thermal systems on the rooftop of a reference building. A simulation was conducted to analyze how installation and orientation impact the costs of solar energy production, savings on wood pellets for heating, and the system's efficiency. The economic efficiency of a solar thermal installation can be strongly influenced by the installation method and orientation. Simulation results show variations in solar energy contribution percentages, heating and hot water fractions, and the energy balance for different installation scenarios.
Abstract:
Concentrated Solar Power (CSP) technology is one of the most promising candidate for mitigating the future energy crisis. The extracted power from CSP technology is very clean, reliable and environmental friendly. An overview of CSP technologies like Parabolic Trough, Solar Tower, Parabolic Dish, Linear Fresnel technology have been described in this paper. Comparison among these technologies has been illustrated in this work. For extenuating the present power crisis in Bangladesh CSP technology has great opportunities, since the average Direct Normal Irradiance (DNI) in Bangladesh is 4-6.5 KWh/m 2 which is suitable for all types of CSP technology. Suitable locations for different CSP plants in Bangladesh are also proposed on the basis of efficiency, required area and amount of DNI received.
DOI: 10.1109/ECACE.2017.7913020
This document describes a solar cooler project that uses solar energy to power a fan to provide cool air. The main components are a solar panel that collects sunlight and charges a battery, which then powers a DC motor connected to a fan. It aims to save on electricity costs compared to traditional coolers that use power from the electric grid. While initial costs are high, it allows people without grid access to have air cooling. However, solar radiation levels vary with weather so it may not work as well on cloudy days.
This document is a project report submitted as part of a Master of Technology degree in green energy technology. It discusses conceptual design and economic analysis for integrating solar PV and solar thermal systems into an electroplating industry. The report includes an introduction to solar power technologies, electroplating industry processes, and considerations for integrating solar into industrial processes. It then outlines the project methods, including profiling the target company and developing conceptual designs for solar thermal and PV systems. The results and economic analysis of integrating these solar systems are also discussed.
A review of the growth of the Israel Genealogy Research Association Database Collection for the last 12 months. Our collection is now passed the 3 million mark and still growing. See which archives have contributed the most. See the different types of records we have, and which years have had records added. You can also see what we have for the future.
How to Manage Your Lost Opportunities in Odoo 17 CRMCeline George
Odoo 17 CRM allows us to track why we lose sales opportunities with "Lost Reasons." This helps analyze our sales process and identify areas for improvement. Here's how to configure lost reasons in Odoo 17 CRM
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...Dr. Vinod Kumar Kanvaria
Exploiting Artificial Intelligence for Empowering Researchers and Faculty,
International FDP on Fundamentals of Research in Social Sciences
at Integral University, Lucknow, 06.06.2024
By Dr. Vinod Kumar Kanvaria
This slide is special for master students (MIBS & MIFB) in UUM. Also useful for readers who are interested in the topic of contemporary Islamic banking.
How to Setup Warehouse & Location in Odoo 17 InventoryCeline George
In this slide, we'll explore how to set up warehouses and locations in Odoo 17 Inventory. This will help us manage our stock effectively, track inventory levels, and streamline warehouse operations.
Main Java[All of the Base Concepts}.docxadhitya5119
This is part 1 of my Java Learning Journey. This Contains Custom methods, classes, constructors, packages, multithreading , try- catch block, finally block and more.
This presentation was provided by Steph Pollock of The American Psychological Association’s Journals Program, and Damita Snow, of The American Society of Civil Engineers (ASCE), for the initial session of NISO's 2024 Training Series "DEIA in the Scholarly Landscape." Session One: 'Setting Expectations: a DEIA Primer,' was held June 6, 2024.
Strategies for Effective Upskilling is a presentation by Chinwendu Peace in a Your Skill Boost Masterclass organisation by the Excellence Foundation for South Sudan on 08th and 09th June 2024 from 1 PM to 3 PM on each day.
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Pawan report
1. SOLAR THERMAL COLLECTOR
CHAPTER-1
INTRODUCTION
Solar Thermal Electricity (STE) is a renewable energy source, which, after a demonstration period of
25 years since the first plant installations, is now entering a commercial ramp-up phase. There are two
main approaches to generate power from sun radiation. PV for instance, directly converts captured solar
radiation intro electricity. STE technology is based on the principle that concentration of solar radiation
– by using mirrors in a receiver developed for that purpose – enables heating- up fluids at high
temperature, around 350-550 degrees with current technologies. The thermal energy can then be used to
generate electricity through a proper cycle process and electrical generator system. Figure:-1 breaks
down STE systems into their main functionalities.
The adoption of the STE technology for power generation is driven by its unique value proposition:
STE is a competitively priced, predictable, dispatchable, and reliable renewable energy source with a
high share of local content. STE storage capabilities differentiate this technology from renewable
sources like wind or PV. STE can store the heat produced when the sun is shining, to produce
electricity when it is really needed. This allows a higher dispatchability of electricity production that is
currently only available, at competitive costs, by conventional sources like coal or gas or other
renewables with limited potential or high environmental impact such as hydro, biomass and
geothermal. Furthermore, STE offers these advantages without conventional sources drawbacks like
CO2 emissions and requirement of fossil fuels. The present document synthesizes the collective
effort of the STE industry, to derive an industry roadmap. The study was initiated by the European
Solar Thermal Electricity Association, ESTELA with the objective e to assess STE’s competitiveness
and to create a common understanding within the industry about the current status of the technology. It
is meant to provide the basis for a dialogue with stakeholders in the energy sector, in particular between
politicians, utilities and the STE industry.
Solar Thermal Electricity (STE) comprises various technologies that convert concentrated solar
radiation into heat to produce electricity. Mirrors focus direct solar radiation onto special receivers, in
which fluids are heated up beyond 400°C. This heat is converted into mechanical energy by means of a
thermodynamic cycle and then into electricity by the alternator.
EE/SGV/STE /1
2. After over 20 years of successful operations, STE is now entering a commercial ramp-up phase with
several large scale projects ≥50MW around the world. Growth drivers for this energy source include
increasing demand for Renewable Energy Sources (RES) complemented by its unique value
proposition when compared with other energy sources:
• Predictability and reliability of production
• Dispatchability due to proven and highly cost efficient storage and potential plant integrated back up
firing
• Grid stability due to the inertial features of STE power blocks
• Cost competitiveness against other renewable energy sources
• Large scale deployment and energy on demand
• Long-term supply security and independence from oil and gas prices
• High share of local content
The present industry roadmap initiated by the European Solar Thermal Electricity Association (ESTELA)
is based in a collective effort to assess STE’s competitiveness and to create a common understanding
within the industry about the current status and expected evolution of the technologies. Figure 2
provides a high level overview of the industry vision that supports this roadmap. The STE industry is
committed to technological improvement initiatives, focused on increasing plant efficiency and
reducing deployment and operating costs. By 2015, when most of these improvements are expected
to be implemented in new plants, energy production boosts greater than 10% and cost decreases up
to 20% are expected to be achieved. Furthermore, economies of scale resulting from plant’s size
increase will also contribute to reduce plans’ CAPEX per MW installed up to 30%. STE deployment in
locations with very high solar radiation, such as the MENA region, further contribute to the
achievement of cost competitiveness of this technology by reducing costs of electricity up to 25%. All
these factors can lead to electricity generation cost savings up to 30% by 2025 and up to 50% by 2025,
reaching competitive levels with conventional sources (e.g. coal/gas).
Additionally to the potential to substitute conventional sources, STE can complement renewable
energy sources portfolio as a peak to mid load provider. To achieve the targets pursued by the
industry it is essential that governments foster the deployment of STE technology by addressing the
following key energy and environmental policy enablers:
EE/SGV/STE /2
3. Our sun produces 400,000,000,000,000,000,000,000,000 watts of energy every second and the belief
is that it will last for another 5 billion years. The United States reached peak oil production in 1970,
and there is no telling when global oi l production will peak, but it is accepted that when it is gone the
party is over. The sun, however, is the most reliable and abundant source of energy.
It is important to understand that solar thermal technology is not the same as solar panel, or
photovoltaic, technology. Solar thermal electric energy generation concentrates the light from the sun
to create heat, and that heat is used to run a heat engine, which turns a generator to make electricity.
The working fluid that is heated by the concentrated sunlight can be a liquid or a gas. Different
working fluids include water, oil, salts, air, nitrogen, helium, etc. Different engine types include steam
engines, gas turbines, Stiiling engines, etc.
All of these engines can be quite efficient, often between 30% and 40%, and are capable of producing
10’s to 100’s of megawatts of power. Photovoltaic, or PV energy conversion, on the other hand,
directly converts the sun’s light into electricity. This means that solar panels are only effective during
daylight hours because storing electricity is not a particularly efficient process. Heat storage is a far
easier and efficient method, which is what makes solar thermal so attractive for large-scale energy
production. Heat can be stored during the day and then converted into electricity at night. Solar
thermal plants that have storage capacities can drastically improve both the economics and the
dispatchability of solar electricity.
Solar thermal power currently leads the way as the most cost-effective solar technology on a large
scale. It currently beats other PV systems, and it also can beat the cost of electricity from fossil fuels
such as natural gas. In terms of low-cost and high negative environmental impact, nothing competes
with coal. but major solar thermal industry players such as eSolar, Brightsource, or Abengoa, have
already beaten the price of photovoltaic and natural gas, and they have plans to beat the price of coal
in the near future. With an increasingly industrializing planet, the leaders in solar thermal technology
have an ever-growing market. The issue is, and will always be, how to make solar thermal technology
more economical. There are currently two methods for solar thermal collection. The first is line focus
collection. The second is point focus collection.
Line focus is less expensive, technically less difficult, but not as efficient as point focus. The basis for
this technology is a parabola-shaped mirror, which rotates on a single axis throughout the day
EE/SGV/STE /3
4. tracking the sun. Point focus technique requires a series of mirrors surrounding a central tower, also
known as a power tower. The mirrors focus the sun’s rays onto a point on the tower, which then
transfers the heat into more usable energy.
FIG:-1.1 Basic diagram of solar thermal collector
FIG:-1.2 the nine steps of STE
EE/SGV/STE /4
5. CHAPTER-2
Low temperature collectors
Glazed Solar Collectors are designed primarily for space heating and they re circulate building air
through a solar air panel where the air is heated and then directed back into the building. These solar
space heating systems require at least two penetrations into the building and only perform when the
air in the solar collector is warmer than the building room temperature. Most glazed collectors are
used in the residential sector.
Unglazed Solar Collectors are primarily used to pre-heat make-up ventilation air in commercial,
industrial and institutional buildings with a high ventilation load. They turn building walls or sections
of walls into low cost, high performance, unglazed solar collectors. Also called, "transpired solar
panels", they employ a painted perforated metal solar heat absorber that also serves as the exterior
wall surface of the building. Heat conducts from the absorber surface to the thermal boundary layer
of air 1 mm thick on the outside of the absorber and to air that passes behind the absorber. The
boundary layer of air is drawn into a nearby perforation before the heat can escape by convection to
the outside air. The heated air is then drawn from behind the absorber plate into the building's
ventilation system.
A Trombe wall is a passive solar heating and ventilation system consisting of an air channel
sandwiched between a window and a sun-facing thermal mass. During the ventilation cycle, sunlight
stores heat in the thermal mass and warms the air channel causing circulation through vents at the
top and bottom of the wall. During the heating cycle the Trombe wall radiates stored heat.
Solar roof ponds are unique solar heating and cooling systems developed by Harold Hay in the 1960s.
A basic system consists of a roof-mounted water bladder with a movable insulating cover. This system
can control heat exchange between interior and exterior environments by covering and uncovering
the bladder between night and day. When heating is a concern the bladder is uncovered during the
day allowing sunlight to warm the water bladder and store heat for evening use. When cooling is a
concern the covered bladder draws heat from the building's interior during the day and is uncovered
at night to radiate heat to the cooler atmosphere. The Skytherm house in Atascadero, California uses
a prototype roof pond for heating and cooling.
EE/SGV/STE /5
6. Solar space heating with solar air heat collectors is more popular in the USA and Canada than heating
with solar liquid collectors since most buildings already have a ventilation system for heating and
cooling. The two main types of solar air panels are glazed and unglazed.
Of the 21,000,000 square feet (2,000,000 m2) of solar thermal collectors produced in the United
States in 2007, 16,000,000 square feet (1,500,000 m2) were of the low-temperature variety. Lowtemperature collectors are generally installed to heat swimming pools, although they can also be used
for space heating. Collectors can use air or water as the medium to transfer the heat to their
destination.
Heat storage in low-temperature solar thermal systems
Inter seasonal storage: Solar heat (or heat from other sources) can be effectively stored between
opposing season s aquifers, underground geological strata, large specially constructed pits, and large
tanks that are insulated and covered with earth.
Short-term storage: Thermal mass materials store solar energy during the day and release this energy
during cooler periods. Common thermal mass materials include stone, concrete, and water. The
proportion and placement of thermal mass should consider several factors such as climate, day
lighting, and shading conditions. When properly incorporated, thermal mass can passively maintain
comfortable temperatures while reducing energy consumption.
Low temperature collectors are flat plates collectors and evacuated tube collectors generally use to
heat swimming pools .the temperature range of low thermal collectors 5 to 30 degree .
Low-temperature collectors are flat plates generally used to heat swimming pools.
FIG:- 2.1 Unglazed, "transpired" air collector
EE/SGV/STE /6
7. FIG : - 2.2 Flat plate collectors
Solar heat-driven ventilation
A solar chimney (or thermal chimney) is a passive solar ventilation system composed of a hollow thermal mass
connecting the interior and exterior of a building. As the chimney warms, the air inside is heated causing
an updraft that pulls air through the building. These systems have been in use since Roman times and remain
common in the Middle East.
EE/SGV/STE /7
8. CHAPTER:-3
Medium temperature collectors
These collectors could be used to produce approximately 50% and more of the hot water needed for
residential and commercial use in the United States. In the United States, a typical system costs $4000–
$6000 retail ($1400 to $2200 wholesale for the materials) and 30% of the system qualifies for a federal
tax credit + additional state credit exists in about half of the states. Labor for a simple open loop system
in southern climates can take 3–5 hours for the installation and 4–6 hours in Northern areas. Northern
system require more collector area and more complex plumbing to protect the collector from freezing.
With this incentive, the payback time for a typical household is four to nine years, depending on the
state. Similar subsidies exist in parts of Europe. A crew of one solar plumber and two assistants with
minimal training can install a system per day. Thermosiphon installation have negligible maintenance
costs (costs rise if antifreeze and mains power are used for circulation) and in the US reduces a
households' operating costs by $6 per person per month. Solar water heating can reduce CO 2 emissions
of a family of four by 1 ton/year (if replacing natural gas) or 3 ton/year (if replacing electricity).
Medium-temperature installations can use any of several designs: common designs are pressurized
glycol, drain back, batch systems and newer low pressure freeze tolerant systems using polymer pipes
containing water with photovoltaic pumping. European and International standards are being reviewed
to accommodate innovations in design and operation of medium temperature collectors. Operational
innovations include "permanently wetted collector" operation. This innovation reduces or even
eliminates the occurrence of no-flow high temperature stresses called stagnation which would
otherwise reduce the life expectancy of collectors.
Medium-temperature collectors are also used flat plates collectors but are used for heating water for
cooking. the temperature range of medium thermal collectors 30 degree to 100 degree .
Medium-temperature collectors are also usually flat plates but are used for heating water or air for
residential and commercial use. Medium-temperature installations can use any of several designs:
common designs are pressurized glycol, drain back, batch systems and newer low pressure freeze
tolerant systems using polymer pipes containing water with photovoltaic pumping. European and
International standards are being reviewed to accommodate innovations in design and operation of
medium temperature collectors.
EE/SGV/STE /8
9. Solar drying
Solar thermal energy can be useful for drying wood for construction and wood fuels such as wood
chips for combustion. Solar is also used for food products such as fruits, grains, and fish. Crop drying
by solar means is environmentally friendly as well as cost effective while improving the quality. The
less money it takes to make a product, the less it can be sold for, pleasing both the buyers and the
sellers. Technologies in solar drying include ultra low cost pumped transpired plate air collectors based
on black fabrics. Solar thermal energy is helpful in the process of drying products such as wood chips
and other forms of biomass by raising the temperature while allowing air to pass through and get rid of
the moisture.
Cooking
Solar cookers use sunlight for cooking, drying and pasteurization. Solar cooking offsets fuel costs,
reduces demand for fuel or firewood, and improves air quality by reducing or removing a source of
smoke. The simplest type of solar cooker is the box cooker first built by Horace de Saussure in 1767. A
basic box cooker consists of an insulated container with a transparent lid. These cookers can be used
effectively with partially overcast skies and will typically reach temperatures of 50–100 °C.
Concentrating solar cookers use reflectors to concentrate solar energy onto a cooking container. The
most common reflector geometries are flat plate, disc and parabolic trough type. These designs cook
faster and at higher temperatures (up to 350 °C) but require direct light to function properly.
The Solar Kitchen in Auroville, India uses a unique concentrating technology known as the solar bowl.
Contrary to conventional tracking reflector/fixed receiver systems, the solar bowl uses a fixed
spherical reflector with a receiver which tracks the focus of light as the Sun moves across the sky. The
solar bowl's receiver reaches temperature of 150 °C that is used to produce steam that helps cook
2,000 daily meals. Many other solar kitchens in India use another unique concentrating technology
known as the Scheffler reflector. This technology was first developed by Wolfgang Scheffler in 1986. A
Scheffler reflector is a parabolic dish that uses single axis tracking to follow the Sun's daily course.
These reflectors have a flexible reflective surface that is able to change its curvature to adjust to
seasonal variations in the incident angle of sunlight. Scheffler reflectors have the advantage of having
a fixed focal point which improves the ease of cooking and are able to reach temperatures of 450650 °C. Built in 1999 by the Brahma Kumaris, the world's largest Scheffler reflector system in Abu
EE/SGV/STE /9
10. Road, Rajasthan India is capable of cooking up to 35,000 meals a day. By early 2008, over 2000 large
cookers of the Scheffler design had been built worldwide.
Distillation
Solar stills can be used to make drinking water in areas where clean water is not common. Solar
distillation is necessary in these situations to provide people with purified water. Solar energy heats up
the water in the still. The water then evaporates and condenses on the bottom of the covering glass.
Medium-temperature collectors are also used flat plates collectors but are used for heating water for
cooking the temperature range of medium thermal collectors 30 degree to 100 degree .
Medium-temperature collectors are also usually flat plates but are used for heating water or air for
residential and commercial use.
FIG: - 3 Evacuated tube collectors
EE/SGV/STE /10
11. CHAPTER:-4
High temperature collectors
Where temperatures below about 95 °C are sufficient, as for space heating, flat-plate collectors of the
non concentrating type are generally used. Because of the relatively high heat losses through the
glazing, flat plate collectors will not reach temperatures much above 200 °C even when the heat
transfer fluid is stagnant. Such temperatures are too low for efficient conversion to electricity.
The efficiency of heat engines increases with the temperature of the heat source. To achieve this in
solar thermal energy plants, solar radiation is concentrated by mirrors or lenses to obtain higher
temperatures – a technique called Concentrated Solar Power (CSP). The practical effect of high
efficiencies is to reduce the plant's collector size and total land use per unit power generated, reducing
the environmental impacts of a power plant as well as its expense.
As the temperature increases, different forms of conversion become practical. Up to 600 °C, steam
turbines, standard technology, have an efficiency up to 41%. Above 600 °C, gas turbines can be more
efficient. Higher temperatures are problematic because different materials and techniques are needed.
One proposal for very high temperatures is to use liquid fluoride salts operating between 700 °C to 800
°C, using multi-stage turbine systems to achieve 50% or more thermal efficiencies. The
higher operating temperatures permit the plant to use higher-temperature dry heat exchangers for its
thermal exhaust, reducing the plant's water use – critical in the deserts where large solar plants are
practical. High temperatures also make heat storage more efficient, because more watt-hours are stored
per unit of fluid.
Since the CSP plant generates heat first of all, it can store the heat before conversion to electricity. With
current technology, storage of heat is much cheaper and more efficient than storage of electricity. In
this way, the CSP plant can produce electricity day and night. If the CSP site has predictable solar
radiation, then the CSP plant becomes a reliable power plant. Reliability can further be improved by
installing a back-up combustion system. The back-up system can use most of the CSP plant, which
decreases the cost of the back-up system CSP facilities utilize high electrical conductivity materials,
such as copper, in field power cables, grounding networks, and motors for tracking and pumping fluids,
as well as in the main generator and high voltage transformers. (See: Copper in concentrating solar
thermal power facilities.)
EE/SGV/STE /11
12. With reliability, unused desert, no pollution, and no fuel costs, the obstacles for large deployment for
CSP are cost, aesthetics, land use and similar factors for the necessary connecting high tension lines.
Although only a small % of the desert is necessary to meet global electricity demand, still a large area
must be covered with mirrors or lenses to obtain a significant amount of energy. An important way to
decrease cost is the use of a simple design.
FIG:-4.1 Concentrated solar power plant using parabolic trough design.
System designs
During the day the sun has different positions. For low concentration systems (and low temperatures)
tracking can be avoided (or limited to a few positions per year) if nonimaging optics are used. For
higher concentrations, however, if the mirrors or lenses do not move, then the focus of the mirrors or
lenses changes (but also in these cases nonimaging optics provides the widest acceptance angles for a
given concentration). Therefore it seems unavoidable that there needs to be a tracking system that
follows the position of the sun (for solar photovoltaic a solar tracker is only optional). The tracking
system increases the cost and complexity. With this in mind, different designs can be distinguished in
how they concentrate the light and track the position of the sun.
EE/SGV/STE /12
13. Parabolic trough designs
Parabolic trough power plants use a curved, mirrored trough which reflects the direct solar radiation
onto a glass tube containing a fluid (also called a receiver, absorber or collector) running the length of
the trough, positioned at the focal point of the reflectors. The trough is parabolic along one axis and
linear in the orthogonal axis. For change of the daily position of the sun perpendicular to the receiver,
the trough tilts east to west so that the direct radiation remains focused on the receiver. However,
seasonal changes in the in angle of sunlight parallel to the trough does not require adjustment of the
mirrors, since the light is simply concentrated elsewhere on the receiver. Thus the trough design does
not require tracking on a second axis. The receiver may be enclosed in a glass vacuum chamber. The
vacuum significantly reduces convective heat loss.
A fluid (also called heat transfer fluid) passes through the receiver and becomes very hot. Common
fluids are synthetic oil, molten salt and pressurized steam. The fluid containing the heat is transported
to a heat engine where about a third of the heat is converted to electricity.
Full-scale parabolic trough systems consist of many such troughs laid out in parallel over a large area
of land. Since 1985 a solar thermal system using this principle has been in full operation
in California in the United States. It is called the Solar Energy Generating Systems (SEGS) system.
Other CSP designs lack this kind of long experience and therefore it can currently be said that the
parabolic trough design is the most thoroughly proven CSP technology.
The SEGS is a collection of nine plants with a total capacity of 350 MW. It is currently the largest
operational solar system (both thermal and non-thermal). A newer plant is Nevada Solar One plant with
a capacity of 64 MW. The 150 MW Andasol solar power stations are in Spain with each site having a
capacity of 50 MW. Note however, that those plants have heat storage which requires a larger field of
solar collectors relative to the size of the steam turbine-generator to store heat and send heat to the
steam turbine at the same time. Heat storage enables better utilization of the steam turbine. With day
and some nighttime operation of the steam-turbine Andasol 1 at 50 MW peak capacity produces more
energy than Nevada Solar One at 64 MW peak capacity, due to the former plant's thermal energy
storage system and larger solar field. The 280MW Solana Generating Station came online in Arizona in
2013 with 6 hours of power storage.
Hassi R'Mel integrated solar combined cycle power station in Algeria and Martin Next Generation
Solar Energy Center both use parabolic troughs in a combined cycle with natural gas.
EE/SGV/STE /13
14. FIG:-4.2 Sketch of a parabolic trough design. A change of position of the sun parallel to the receiver
does not require adjustment of the mirrors
Power tower designs
Power towers (also known as 'central tower' power plants or 'heliostat' power plants) capture and focus
the sun's thermal energy with thousands of tracking mirrors (called heliostats) in roughly a two square
mile field. A tower resides in the center of the heliostat field. The heliostats focus concentrated sunlight
on a receiver which sits on top of the tower. Within the receiver the concentrated sunlight heats molten
salt to over 1,000 °F(538 °C). The heated molten salt then flows into a thermal storage tank where it is
stored, maintaining 98% thermal efficiency, and eventually pumped to a steam generator. The steam
drives a standard turbine to generate electricity. This process, also known as the "Rankine cycle" is
similar to a standard coal-fired power plant, except it is fueled by clean and free solar energy.
The advantage of this design above the parabolic trough design is the higher temperature. Thermal
energy at higher temperatures can be converted to electricity more efficiently and can be more cheaply
stored for later use. Furthermore, there is less need to flatten the ground area. In principle a power
tower can be built on the side of a hill. Mirrors can be flat and plumbing is concentrated in the tower.
The disadvantage is that each mirror must have its own dual-axis control, while in the parabolic trough
design single axis tracking can be shared for a large array of mirrors.
A cost/performance comparison between power tower and parabolic trough concentrators was made by
the NREL which estimated that by 2020 electricity could be produced from power towers for 5.47
EE/SGV/STE /14
15. ¢/kWh and for 6.21 ¢/kWh from parabolic troughs. The capacity factor for power towers was estimated
to be 72.9% and 56.2% for parabolic troughs. There is some hope that the development of cheap,
durable, mass producible heliostat power plant components could bring this cost down.
The first solar power tower was the 10 MW Solar One in 1981, later redeveloped into Solar Two. The
French 2MW Themis was completed in 1983 and the Soviet 5MW SES5 was built in 1985. All of these
early project are out of commission. Solar thermal power did not progress from these experimental
plants until the mid-2000s.
The first commercial tower power plant was PS10 in Spain with a capacity of 11 MW, completed in
2007. Since then a number of plants have been proposed, several have been built on a number of
countries (Spain, Germany, U.S., Turkey, China, India) but several proposed plants were cancelled as
PV solar prices plummeted. A solar power tower is expected to come online in South Africa in 2014.
Solar Power Facility in California will generate 392 MW of electricity from three towers making it the
largest solar power tower plant when it comes online in late 2013.
FIG:-4.3
Flat mirrors focus the light on the top of the tower. The white surfaces below the receiver
are used for calibrating the mirror positions.
EE/SGV/STE /15
16. Dish designs
CSP-Stirling is known to have the highest efficiency of all solar technologies around 30% compared to
solar PV approximately 15%,and is predicted to be able to produce the cheapest energy among all
renewable energy sources in high scale production and hot areas, semi deserts etc. A dish
Stirling system uses a large, reflective, parabolic dish (similar in shape to satellite television dish). It
focuses all the sunlight that strikes the dish up onto a single point above the dish, where a receiver
captures the heat and transforms it into a useful form. Typically the dish is coupled with a Stirling
engine in a Dish-Stirling System, but also sometimes a steam engine is used. These create rotational
kinetic energy that can be converted to electricity using an electric generator.
The advantage of a dish system is that it can achieve much higher temperatures due to the higher
concentration of light (as in tower designs). Higher temperatures lead to better conversion to electricity
and the dish system is very efficient on this point. However, there are also some disadvantages. Heat to
electricity conversion requires moving parts and that results in maintenance. In general, a centralized
approach for this conversion is better than the decentralized concept in the dish design. Second, the
(heavy) engine is part of the moving structure, which requires a rigid frame and strong tracking system.
Furthermore, parabolic mirrors are used instead of flat mirrors and tracking must be dual-axis.
In 2005 Southern California Edison announced an agreement to purchase solar powered Stirling
engines from Stirling Energy Systems over a twenty-year period and in quantities (20,000 units)
sufficient to generate 500 megawatts of electricity. In January 2010, Stirling Energy Systems and
Tessera Solar commissioned the first demonstration 1.5-megawatt power plant ("Maricopa Solar")
using Stirling technology in Peoria, Arizona. At the beginning of 2011 Stirling Energy's development
arm, Tessera Solar, sold off its two large projects, the 709 MW Imperial project and the 850 MW
Calico project to AES Solar and K.Road, respectively, and in the fall of 2011 Stirling Energy Systems
applied for Chapter 7 bankruptcy due to competition from low cost photovoltaics. In 2012 the
Maricopa plant was bought and dismantled by United Sun Systems.
Higher temperatures lead to better conversion to electricity and the dish system is very efficient on this
point. However, there are also some disadvantages. Heat to electricity conversion requires moving parts
and that results in maintenance.
EE/SGV/STE /16
17. A dish Stirling system uses a large, reflective, parabolic dish (similar in shape to satellite television
dish). It focuses all the sunlight that strikes the dish up onto a single point above the dish, where a
receiver captures the heat and transforms it into a useful form. Typically the dish is coupled with
a Stirling engine in a Dish-Stirling System, but also sometimes a steam engine is used. These create
rotational kinetic energy that can be converted to electricity using an electric generator.
. A dish Stirling system uses a large, reflective, parabolic dish (similar in shape to satellite television
dish).
FIG:-4.4 A parabolic solar dish concentrating the sun's rays on the heating element of a Stirling engine.
The entire unit acts as a solar tracker.
EE/SGV/STE /17
18. Fresnel reflectors
A linear Fresnel reflector power plant uses a series of long, narrow, shallow-curvature (or even flat)
mirrors to focus light onto one or more linear receivers positioned above the mirrors. On top of the
receiver a small parabolic mirror can be attached for further focusing the light. These systems aim to
offer lower overall costs by sharing a receiver between several mirrors (as compared with trough and
dish concepts), while still using the simple line-focus geometry with one axis for tracking. This is
similar to the trough design (and different from central towers and dishes with dual-axis). The receiver
is stationary and so fluid couplings are not required (as in troughs and dishes). The mirrors also do not
need to support the receiver, so they are structurally simpler. When suitable aiming strategies are used
(mirrors aimed at different receivers at different times of day), this can allow a denser packing of
mirrors on available land area.
Recent prototypes of these types of systems have been built in Australia and by Solarmundo in
Belgium.
The Solarmundo research and development project, with its pilot plant at Liège, was closed down after
successful proof of concept of the Linear Fresnel technology. Subsequently, Solar Power Group GmbH
(SPG), based in Munich, Germany, was founded by some Solarmundo team members. A Fresnel-based
prototype with direct steam generation was built by SPG in conjunction with the German Aerospace
Center (DLR).
Based on the Australian prototype, a 177 MW plant had been proposed near San Luis Obispo in
California and would be built by Ausra. But Ausra sold its planned California solar farm to First
Solar. First Solar (a manufacturer of thin-film photovoltaic solar cells) will not build the Carrizo
project, and the deal has resulted in the cancellation of Ausra’s contract to provide 177 megawatts to
P.G.& E.Small capacity plants are an enormous economical challenge with conventional parabolic
trough and drive design – few companies build such small projects. There are plans for SHP Europe,
former Ausra subsidiary, to build a 6.5 MW combined cycle plant in Portugal. The German company
SK Energy GmbH has plans to build several small 1-3 MW plants in Southern Europe (esp. in Spain)
using Fresnel mirror and steam drive technology (Press Release).
In May 2008, the German Solar Power Group GmbH and the Spanish Laer S.L. agreed the joint
execution of a solar thermal power plant in central Spain. This will be the first commercial solar
thermal power plant in Spain based on the Fresnel collector technology of the Solar Power Group. The
EE/SGV/STE /18
19. planned size of the power plant will be 10 MW a solar thermal collector field with a fossil co-firing unit
as backup system. The start of constructions is planned for 2009. The project is located in
Gotarrendura, a small renewable energy pioneering village, about 100 km northwest of Madrid, Spain.
A Multi-Tower Solar Array (MTSA) concept, that uses a point-focus Fresnel reflector idea, has also
been developed, but has not yet been prototyped.
Since March 2009, the Fresnel solar power plant Puerto Errado 1 (PE 1) of the German
company Novatec Solar is in commercial operation in southern Spain . The solar thermal power plant is
based on linear Fresnel collector technology and has an electrical capacity of 1.4 MW. Beside a
conventional power block, PE 1 comprises a solar boiler with mirror surface of around 18,000m². The
steam is generated by concentrating direct solar irradiation onto a linear receiver which is 7.40m above
the ground. An absorber tube is positioned in the focal line of the mirror field in which water is
evaporated directly into saturated steam at 270 °C and at a pressure of 55 bar by the concentrated solar
energy. Since September 2011, due to a new receiver design developed by Novatec Solar, superheated
steam with temperatures above 500°C can be generated.
The 30 MW solar thermal power plant Puerto Errado 2 (PE2) is a scale up of PE 1 and also based on
the Fresnel collector technology developed by the German company Novatec Solar. It comprises a
mirror surface of 302,000m² and is in operation since August 2012. The plant is located in the region of
Murcia. Five Swiss utilities (EBL, IWB, Ekz, ewz, ewb) are the owners of the world's largest Fresnel
CSP power station.
These systems aim to offer lower overall costs by sharing a receiver between several mirrors (as
compared with trough and dish concepts), while still using the simple line-focus geometry with one
axis for tracking. This is similar to the trough design (and different from central towers and dishes with
dual-axis). The receiver is stationary and so fluid couplings are not required (as in troughs and dishes).
The mirrors also do not need to support the receiver, so they are structurally simpler. When suitable
aiming strategies are used (mirrors aimed at different receivers at different times of day), this can allow
a denser packing of mirrors on available land area.
the German Solar Power Group GmbH and the Spanish Laer S.L. agreed the joint execution of a solar
thermal power plant in central Spain. This will be the first commercial solar thermal power plant in
Spain based on the Fresnel collector technology of the Solar Power Group. The planned size of the
power plant will be 10 MW a solar thermal collector field with a fossil co-firing unit as backup system.
The start of constructions is planned for 2009. The project is located in Gotarrendura, a small
renewable energy pioneering village, about 100 km northwest of Madrid, Spain.
EE/SGV/STE /19
20. FIG:-4.5 linear Fresnel reflector
Linear Fresnel reflector technologies:
Rival single axis tracking technologies include the relatively new linear Fresnel reflector (LFR) and
compact-LFR (CLFR) technologies. The LFR differs from that of the parabolic trough in that the
absorber is fixed in space above the mirror field. Also, the reflector is composed of many low row
segments, which focus collectively on an elevated long tower receiver running parallel to the reflector
rotational axis.
This system offers a lower cost solution as the absorber row is shared among several rows of mirrors.
However, one fundamental difficulty with the LFR technology is the avoidance of shading of incoming
solar radiation and blocking of reflected solar radiation by adjacent reflectors. Blocking and shading
can be reduced by using absorber towers elevated higher or by increasing the absorber size, which
allows increased spacing between reflectors remote from the absorber. Both these solutions increase
costs, as larger ground usage is required.
EE/SGV/STE /20
21. The CLFR offers an alternate solution to the LFR problem. The classic LFR has only one linear
absorber on a single linear tower. This prohibits any option of the direction of orientation of a given
reflector. Since this technology would be introduced in a large field, one can assume that there will be
many linear absorbers in the system. Therefore, if the linear absorbers are close enough, individual
reflectors will have the option of directing reflected solar radiation to at least two absorbers. This
additional factor gives potential for more densely packed arrays, since patterns of alternative reflector
inclination can be set up such that closely packed reflectors can be positioned without shading and
blocking.
advancement of this technology. Features that enhance the cost effectiveness of this system compared
to that of the parabolic trough technology include minimized structural costs, minimized parasitic
pumping losses, and low maintenance. CLFR power plants offer reduced costs in all elements of the
solar array.[47] These reduced costs encourage the Minimized structural costs are attributed to the use of
flat or elastically curved glass reflectors instead of costly sagged glass reflectors are mounted close to
the ground. Also, the heat transfer loop is separated from the reflector field, avoiding the cost of
flexible high pressure lines required in trough systems. Minimized parasitic pumping losses are due to
the use of water for the heat transfer fluid with passive direct boiling. The use of glass-evacuated tubes
ensures low radiative losses and is inexpensive. Studies of existing CLFR plants have been shown to
deliver tracked beam to electricity efficiency of 19% on an annual basis as a preheater.
Fresnel lenses:
Prototypes of Fresnel lens concentrators have been produced for the collection of thermal energy
by International Automated Systems. No full-scale thermal systems using Fresnel lenses are known to be in
operation, although products incorporating Fresnel lenses in conjunction with photovoltaic cells are already
available.
The advantage of this design is that lenses are cheaper than mirrors. Furthermore, if a material is chosen
that has some flexibility, then a less rigid frame is required to withstand wind load. A new concept of a
lightweight, 'non-disruptive' solar concentrator technology using asymmetric Fresnel lenses that
occupies minimal ground surface area and allows for large amounts of concentrated solar energy per
concentrator is seen in the 'Desert Blooms' project, though a prototype has yet to be made.
EE/SGV/STE /21
22. MicroCSP:
"MicroCSP" references solar thermal technologies in which concentrating solar power (CSP) collectors
are based on the designs used in traditional Concentrating Solar Power systems found in the Mojave
Desert but are smaller in collector size, lighter and operate at lower thermal temperatures usually below
315 °C (600 °F). These systems are designed for modular field or rooftop installation where they are
easy to protect from high winds, snow and humid deployments. Solar manufacturer Sopogy completed
construction on a 1 MW CSP plant at the Natural Energy Laboratory of Hawaii.
MicroCSP is used for community-sized power plants (1 MW to 50 MW), for industrial, agricultural and
manufacturing 'process heat' applications, and when large amounts of hot water are needed, such as
resort swimming pools, water parks, large laundry facilities, sterilization, distillation and other such
uses.
Enclosed parabolic trough:
The enclosed parabolic trough solar thermal system encapsulates the components within a greenhouselike glasshouse. The glasshouse protects the components from the elements that can negatively impact
system reliability and efficiency. Lightweight curved solar-reflecting mirrors are suspended from the
ceiling of the glasshouse by wires. A single-axis tracking system positions the mirrors to retrieve the
optimal amount of sunlight. The mirrors concentrate the sunlight and focus it on a network of stationary
steel pipes, also suspended from the glasshouse structure. Water is pumped through the pipes and
boiled to generate steam when intense sun radiation is applied. The steam is available for process heat.
Sheltering the mirrors from the wind allows them to achieve higher temperature rates and prevents dust
from building up on the mirrors as a result from exposure to humidity.
The advantage of this design is that lenses are cheaper than mirrors. Furthermore, if a material is chosen
that has some flexibility, then a less rigid frame is required to withstand wind load. A new concept of a
lightweight, 'non-disruptive' solar concentrator technology using asymmetric Fresnel lenses that
occupies minimal ground surface area and allows for large amounts of concentrated solar energy per
concentrator is seen in the 'Desert Blooms' [50]project, though a prototype has yet to be made.
EE/SGV/STE /22
23. CHAPTER-5
Future scope of solar thermal energy
we know that sun is a good source of energy so that in the future we will all most depends on sun’s
energy by using solar thermal energy. The STE industry is committed technological Improvements and
focused on increasing plant Efficiency and reducing operating cost. All these factors can lead to
electricity generation cost saving up to 30%by 2015 and up to 50% by 2025 and saving conventional cost like
coal /gas and all other fuels by increasing size of plant.
Solar Thermal Electricity (STE) comprises various technologies that convert concentrated solar
radiation into heat to produce electricity. Mirrors focus direct solar radiation onto special receivers, in
which fluids are heated up beyond 400°C. This heat is converted into mechanical energy by means of a
thermodynamic cycle and then into electricity by the alternator.
After over 20 years of successful operations, STE is now entering a commercial ramp-up phase with
several large scale projects ≥50MW around the world. Growth drivers for this energy source include
increasing demand for Renewable Energy Sources (RES) complemented by its unique value
proposition when compared with other energy sources:
• Predictability and reliability of production
• Dispatchability due to proven and highly
cost effi cient storage and potential plant integrated back up firing The present industry roadmap
initiated by the European Solar Thermal Electricity Association (ESTELA) is based in a collective
effort to assess STE’s competitiveness and to create a common understanding within the industry about
the current status and expected evolution of the technologies. provides a high level overview of the
industry vision that supports this roadmap. The STE industry is committed to technological
improvement initiatives, focused on increasing plant efficiency and reducing
deployment and operating costs. By 2015, when most of these improvements are expected to be
implemented in new plants, energy production boosts greater than 10% and cost decreases to 20% are
expected to be achieved. Furthermore, economies of scale resulting from plant’s size increase will also
contribute to reduce
plants’ CAPEX per MW installed up to 30%. STE deployment in locations with very high solar
radiation, such as the MENA region, further contribute to the achievement of cost competitiveness of
EE/SGV/STE /23
24. this technology by reducing costs of electricity up to 25%. All these factors can lead to electricity
generation cost savings up to 30% by 2015 and up to 50% by 2025, reaching competitive levels with
conventional sources (e.g. coal/gas). Additionally to the potential to substitute conventional sources,
STE can complement renewable energy sources portfolio as a peak to mid load provider.
To achieve the targets pursued by the industry it is essential that governments foster the deployment of
STE technology by addressing the following key energy and environmental policy.
Solar power deals with the use of solar radiation for practical purposes. It has been employed in order
to decrease the carbon footprints from our environment. It is the basic motor of all forms of energy
generation methods. It is free and clean to use. This form of energy is available in abundance in our
environment. The fossil fuels are also mere frozen solar power. Solar energy has remained a necessary
ingredient for decades now. It's demand for usage still prevails.
It is mainly used for the domestic purposes these days. Solar power systems operate by converting the
solar energy into the electrical energy. Usage of this power helps tremendously in reducing the power
bills and also largely helps our environment. Using this form of power for domestic purposes has many
advantages. The people who use it know it better. All of the people who use only solar power operated
electric appliances do not wish to switch to other power systems.
For generating the solar power at our houses, we first need to install the solar panels on the roofs of the
buildings, The solar panels are placed where their is ample amount on sunlight falling on them. Solar
panels trap the heat energy and generate electricity. This form of power can be used to rum many home
electric appliances. A traditional boiler can be used for heating the water when their is no sunlight.
The photovoltaic cells also play an integral role in our lives. They are basically the panels that you can
attach it onto your roofs. With the sunlight falls onto them, the electricity is generated. Their are many
sizes of solar panels available in the market today. The size is proportional to the amount of electricity
to be generated. You must be watchful of the strength of your roof before installing the solar panels.
For the generation of solar power at your homes, place the solar panels to the south.
The solar water heaters are primarily used to heat up the water for the domestic purposes. They are of
two types: direct solar water heaters and indirect solar water heaters. To set up the solar panels, you just
need to have little knowledge about plumbing and electrical wiring. These solar water heaters reduce
the electricity bills and expenses. Solar panels create pollution-free environment. Solar power is the
most flourishing form of eco-friendly energy. It contains no moving parts and generates no noise. It
does not release any harmful radiations into the environment. This form of energy does not affect the
EE/SGV/STE /24
25. human life as well as the animal life. It converts light form into electricity very silently. There is a
particular disadvantage of this form of energy i,e its output variability, When their is no direct sunlight,
these panels fail to work until their is adequate sunlight.
As the technology has advanced, we now have started making use of electric vehicles too. Such
vehicles have started becoming readily available and are operated using battery technology as well as
solar energy. Their costs are now dropping and such vehicles are becoming readily available to the
masses. Electric vehicles have a wonderful future for sure as they do not pollute the environment. They
are also cheap in their usage.
EE/SGV/STE /25
26. CHAPTER:-6
Advantage and disadvantage of STE
Solar energy is becoming increasingly popular as the world takes notice of the burgeoning carbon
emission problems that come with burning fossil fuels. But why all the fuss?
Nay-sayers have become less and less vocal as solar energy’s popularity has grown increasingly
unhindered. Below I will discuss the advantages and disadvantages of solar energy.
Advantages of Solar Energy:No green house gases:
The first and foremost advantage of solar energy is that, beyond panel production, it does not emit any
green house gases. Solar energy is produced by conducting the sun’s radiation – a process void of any
smoke, gas, or other chemical by-product. This is the main driving force behind all green energy
technology, as nations attempt to meet climate change obligations in curbing emissions.
Italy’s Montalto di Castro solar park is a good example of solar’s contribution to curbing emissions. It
avoids 20,000 tonnes per year of carbon emissions compared to fossil fuel energy production.
Ongoing Free Energy:
Another advantage of using solar energy is that beyond initial installation and maintenance, solar
energy is free.Solar doesn’t require expensive and ongoing raw materials like oil or coal, and requires
significantly lower operational labor than conventional power production. Raw materials don’t have to
be constantly extracted, refined, and transported to the power plant.Life expectancy ranges between
manufacturers, but many panels produced today carry a 25-30 year warranty – with a life expectancy of
up to 40 years.
Decentralization of power:
Solar energy offers decentralization in most (sunny) locations, meaning self-reliant societies.Oil, coal,
and gas used to produce conventional electricity is often transported cross-country or internationally.
This transportation has a myriad of additional costs, including monetary costs, pollution costs of
transport, and roading wear and tear costs, all of which is avoided with solar.Of course, decentralization
has its limits as some locations get more sunlight than others.
EE/SGV/STE /26
27. Going off the grid with solar:
Solar energy can be produced on or off the grid. On grid means a house remains connected to the state
electricity grid. Off grid has no connection to the electricity grid, so the house, business or whatever
being powered is relying solely on solar or solar-hybrid.
The ability to produce electricity off the grid is a major advantage of solar energy for people who live
in isolated and rural areas. Power prices and the cost of installing power lines are often exorbitantly
high in these places and many have frequent power-cuts. Many city-dwellers are also choosing to go
off the grid with their alternate energy as part of a self-reliant lifestyle.
Fig-6.1Solar Barn
Solar jobs
A particularly relevant and advantageous feature of solar energy production is that it creates jobs.
The EIAA states that Europe’s solar industry has created 100,000 jobs so far.
Solar jobs come in many forms, from manufacturing, installing, monitoring and maintaining solar
panels, to research and design, development, cultural integration, and policy jobs.
EE/SGV/STE /27
28. The book Natural Capitalism offers a good perspective on the employment potential of green design
and a prudent approach to using resources.
The book proposes that while green technology and associated employment can be expensive, much
greater money can be saved when combined with proven “whole-system” efficiency strategies (e.g
passive lighting and airflow).
With solar energy currently contributing only an estimated 4% of the world’s electricity, and an
economic-model where raw materials don’t have to be indefinitely purchased and transported, it’s
reasonable so assume solar jobs are sustainable if the solar industry can survive the recession.
Solar’s avoidance of politics and price volatility
One of the biggest advantages of solar energy is the ability to avoid the politics and price volatility that
is increasingly characterizing fossil fuel markets.
The sun is an unlimited commodity that can be sourced from many locations, meaning solar is less
vulnerable to the price manipulations and politics that have more than doubled the price of many fossil
fuels in the past decade.
While the price of fossil fuels have increased, the per watt price of solar energy production has more
than halved in the past decade – and is set to become even cheaper in the near future as better
technology and economies of scale take effect.
Furthermore, the ever-abundant nature of the sun’s energy would hint at a democratic and competitive
energy market – where wars aren’t fought over oil fields and high-demand raw materials aren’t
controlled by monopolies.
Of course, a new form of politics has emerged with regard to government incentives and the adoption
of solar, however these politics are arguably minor compared to the fossil fuel status quo.
Saving eco-systems and livelihoods
Because solar doesn’t rely on constantly mining raw materials, it doesn’t result in the destruction of
forests and eco-systems that occurs with many fossil fuel operations.
Destruction can come in many forms, from destruction through accepted extraction methods, to more
irresponsible practices in vulnerable areas, to accidents.
EE/SGV/STE /28
29. Major examples include Canada’s tar sands mining which involves the systematic destruction of the
Boreal Forest (which accounts for 25% of the world’s intact forest land), and creates large toxic byproduct ponds.
The Niger Delta is an example where excessive and irresponsible oil extraction practices have poisoned
fishing deltas previously used by villagers as the main source of food and employment, creating
extremely desperate poverty and essentially decimating villages.
DISADVATAGES
Solar doesn’t work at night
The biggest disadvantage of solar energy is that it’s not constant. To produce solar electricity there
must be sunlight. So energy must be stored or sourced elsewhere at night.
Beyond daily fluctuations, solar production decreases over winter months when there are less sunlight
hours and sun radiation is less intense.
Solar Inefficiency
A very common criticism is that solar energy production is relatively inefficient.
Currently, widespread solar panel efficiency – how much of the sun’s energy a solar panel can convert
into electrical energy – is at around 22%. This means that a fairly vast amount of surface area is
required to produce adequate electricity.
However, efficiency has developed dramatically over the last five years, and solar panel efficiency
should continue to rise steadily over the next five years.
For the moment though, low efficiency is a relevant disadvantage of solar.
Solar inefficiency is an interesting argument, as efficiency is relative. One could ask “inefficient
compared to what?” And “What determines efficiency?” Solar panels currently only have a radiation
efficiency of up to 22%, however they don’t create the carbon by-product that coal produces and
doesn’t require constant extraction, refinement, and transportation – all of which surely carry weight
on efficiency scales.
EE/SGV/STE /29
30. Storing Solar
Solar electricity storage technology has not reached its potential yet.
While there are many solar drip feed batteries available, these are currently costly and bulky, and more
appropriate to small scale home solar panels than large solar farms.
Solar panels are bulky
Solar panels are bulky. This is particularly true of the higher-efficiency, traditional silicon crystalline
wafer solar modules. These are the large solar panels that are covered in glass.
New technology thin-film solar modules are much less bulky, and have recently been developed as
applications such as solar roof tiles and “amorphous” flexible solar modules. The downfall is that thinfilm is currently less efficient than crystalline wafer solar.
EE/SGV/STE /30
31. CHAPTER-7
APPLICATION
Low Temperature (> 30C)
Swimming pool heating
Ventilation air preheating
•Medium Temperature (30C –100C)
Domestic water and space heating
Commercial cafeterias, laundries, hotels
Industrial process heating
•High Temperature (> 100C)
Industrial process heating
Electricity generation
EE/SGV/STE /31
32. CHAPTER-8
CONCLUSION
Low medium and high temperature collectors and solar thermal technology for production of
Electricity and water heating and various purpose is ready for the industry. Various types of
single and dual purpose plants and Industry Have been analyzed and tested in the solar thermal
fields.
Solar Thermal Electricity (STE) is a renewable energy source, which, after a demonstration period of
25 years since the first plant installations, is now entering a commercial ramp-up phase. There are two
main approaches to generate power from sun radiation. PV for instance, directly converts captured solar
radiation intro electricity. STE technology is based on the principle that concentration of solar radiation
– by using mirrors in a receiver developed for that purpose – enables heating- up fluids at high
temperature, around 350-550 degrees with current technologies. The thermal energy can then be used to
generate electricity through a proper cycle process and electrical generator system. breaks down STE
systems into their main functionalities.
The adoption of the STE technology for power generation is driven by its unique value proposition:
STE is a competitively priced, predictable, dispatchable, and reliable renewable energy source with a
high share of local content. STE storage capabilities differentiate this technology from renewable
sources like wind or PV. STE can store the heat produced when the sun is shining, to produce
electricity when it is really needed. This allows a higher dispatchability of electricity production that is
currently only available, at competitive costs, by conventional sources like coal or gas or other
renewables with limited potential or high environmental impact such as hydro, biomass and
geothermal. Furthermore, STE offers these advantages without conventional sources drawbacks like
CO2 emissions and requirement of fossil fuels. The present document synthesizes the collective
effort of the STE industry, to derive an industry roadmap. The study was initiated by the European
Solar Thermal Electricity Association, ESTELA with the objective e to assess STE’s competitiveness
and to create a common understanding within the industry about the current status of the technology. It
is meant to provide the basis for a dialogue with stakeholders in the energy sector, in particular between
politicians, utilities and the STE industry.
EE/SGV/STE /32