PARTITION WALL REQUIREMENT DVANTAGES MOVABLE PARTITION SLIDING SLIDING AND FOLDING SCREEN TYPES OF PARTITION BRICK PARTITION HOLLOW BLOCK AND CLAY BLOCK WOODEN PARTITION STRAWBOARD PARTITION GLASS PARTITION METAL PARTITION CONCRETE PARTITION PLASTER SLAB PARTITION MARKET SURVEY

1. BUILDING CONSTRUTION
PARTITION WALL

2. PARTITION WALL
• PARITION WALL IS DEFINES AS A
WALL OR DIVISION MADE UP OF
CERTAIN MATERIAL THAT ARE
PROVIDED FOR THE PURPOSE OF
DIVIDING ONE ROOM OR PORTION
OF A ROOM FROM ANOTHER
• PARITION WALLS ARE DESGINED AS
NON LOAD BEARING WALLA. IT MAY
BE OF FOLDING, COLLAPSIBLE OR
FIXED TYPE.
• PARTITION WALL COULD BE
MOVABLE. COLLAPSIBLE OR FIXED.

3. REQUIREMENT
• 1- THIN IN CROSS SECTION SO THAT MAXIMUM
FLOOR AREA CAN BE UTLISED.
• 2- CONSTRUCTED FROM LIGHT, UNIFORM,
HOMOGENOUS, DURABLE AND SOUND
INSULATED MATERIAL.
• 3-SIMPLE IN NATURE, EASY AND ECONOMICAL
IN CONSTRUCTION HAVING PROPER
COHERENCE WITH THE TYPE OF BUILDING.
• 4- OFFER REISITANCE AGAINST FIRE, HEAT,
DAMPNESS, TERMITES AND FUNGUS.
• 5- RIGID ENOUGH TO TAKE THE VIBRATION
CAUSED DUE TO LOADS.
• 6- STRONG ENOUGH TO SUPPORT SANTIARY
FITTING AND HEAVY FIXTURES.
ADVANTAGES
• 1-DIVIDE THE AREA INTO NUMBER OF
ROOMS
• 2- PROVIDE PRIVACY TO THE INMATES FROM
SIGHT AND SOUND
• 3-MADE UP OF LIGHT MATERIAL
• 4-OCCUPY LESSEAR AREA
• 5- EAISLY CONSTRUCTED

4. MOVABLE PARTITION
SLIDING SLIDING AND FOLDING SCREEN

5. TYPES OF PARTITION
BRICK PARTITION
• CONSTRUCTED WITH PLAIN BRICKS, REINFORCED BRICKS,
BRICKS- NOGGED OR HOLLOW BRICKS.
• PLAIN BRICKS PARTITION ARE DONE WITH HALF BRICK THICKNESS
GENERALLY STRECHTER BOND.
• REFORCEMENT BRICK PARTITION ARE PROVIED WITH
REINFORCEMENT OF WIRE MESH OR HOOP IRON OR STEEL
BARES IN HALF BRICK THICKNESS WALL.
• BRICK NOGGING PARITION WALL CONSISTS OF BRICKWORK BUILT
UP WITHIN A FRAMEWROK OF WOODEN MEMBERS.
• THESE ARE FIRE RESISTANCE AND SOUND PROOF.
HOLLOW BLOCK AND CLAY BLOCK
• HOLLOW BLOCK PARTITION ARE BUILT OF INDIVIDUAL UNITS
OF CONCRETE.
• -CLAY BLOCKS USED OF TERRA COTTA OR CLAY AND EITHER
USED AS SOLID OR HOLLOW.
• SECTION 30*20 CM WITH THICKNESS 5 TO 15 CM.

6. WOODEN PARTITION
• LIGHT IN WEIGHT.
• THESE ARE NOT FIRE PROOF AND NOT SUITABLE FOR
DAMP LOCATION AND NOT SOUND PROOF.
STRAWBOARD PARTITION
• USED WHERE REMOVAL OF PARTITION IS FREQUENT.
• MADE OF COMPRESSED STAW COVERED THICK PAPER OR
HARDBOARD.
• HEAT AND SOUND PROOF, ECONOMICAL & RECYCLABLE

7. GLASS PARTITION
• MADE OF SHEETS OR HOLLOW GLASS
• GOOD AESTHETICS AND LIGHT.
• DAMP AND SOUND PRROF.
• EASY TO CLEAN AND MAINTAIN.
• SHEETS OF GLASS ARE FIXED IN FRAME OF WOOD
OR MEATL. GLASS BLOCKS ARE ALSO USED.
METAL PARTITION
• LIGHT WEIGHT, FIREPROOF AND STRONG
• EASY TO CONSTRUCT AND SHIFT.
• INSULATED MATERIAL IS FLIIED INTO HOLLOW SPACES.

8. CONCRETE PARTITION
• THESE ARE EITHER PRECAST OR CAST IN SITU.
• SPECIAL CONCRETE POSTS ARE USED FOR THE
CONSTRUCTION OF PRECAST CONCRETE PARTITION
WALLS.
PLASTER SLAB PARTITION
• MADE OF BURNT GYPSUM OR PLASTER OF PARIS.
• 5 - 10 CM THICK SLABS.
• NAILS AND SCREWS CAN BE DRIVEN INTO SLABS.

9. MARKET SURVEY
 Kreative Arts
 Gyproc
 Next G Furniture
 V.K. Sharma & Co.

10. WOODEN PARTITION WALL
WOODEN PARTITION
Brand- Gyproc
Price- 1,930/ sqm
Application- Office
Color- Brown
Surface Finish- Paint coated
Height- 3.6m
WOODEN SLIDING FOLDING PARTITION
Brand- Next G Furniture
Price- 5910/sqm
WOODEN PARTITION SCREEN
Brand- Next G Furniture
Price- 3,999/piece
WOODEN PARTITION
Brand- V.K. Sharma & Co.
Price- 2,690/sqm
Appearance- Modern
Surface Finish-Polished
Thickness- 5- 10 mm

11. ALUMINIUM PARTITION WALL
FOLDING PARTITIONS
Brand- V. K. Sharma & Co.
Price- 5,910/ sqm
Material- Glass and Aluminum
Height- 2.1m- 2.4m
Type- Folding
ALUMINIUM PARTITION LINEARR
MODULAR OFFICE WORKSTATION
Brand- Trends
Price- Rs. 15,500/ piece
Material- Aluminum
Thickness- 60mm
ALUMINIUM WALL PARTITION
Brand- V. K. Sharma & Co.
Price- 1,610/ sqm
frame Color- White
Surface treatment- PVDF Coated
Material- Aluminum acoustic
Application- Acoustic
ALUMINUM GLASS PARTITION
Brand- V. K. Sharma & Co.
Price- 1,610/ sqm
Location- Indoor
Material- Aluminum

12. STAINLESS STEEL PARTITION WALL
METAL PARTITION JALI WITH LOTUS DESIGN
CUTTING
Brand- Kreative Arts
Price- 22,600/sqm
Color- Antique Brass
location- Living Room
Manufacturing Technique- Hand crafted
ROOM PARTITION IN BRASS WITH LEAF
DESIGN
Brand- Kreative arts
Price- 2.75 lakh/ piece
Color- Antique brass
Location- Indoor
Manufacturing Technique- Casting and
welding
STAINLESS STEEL ROOM PARTITION
Brand- Kreative arts
Price- 30,600/sqm
Color- Silver, Rose gold, copper, brass
Manufacturing Technique- Laser cutting
and welding
STAINLESS STEEL PARTITION
Brand- Dharam Industries
Price- 16,100/sqm

13. GYPSUM/ DRYWALL/ UPVC PARTITION
GYPSUM PARTITION
Brand- Super Interior
Price- 1070/ sqm
Color- White
Thickness- 12mm
Insulation- Acoustic
GYPSUM BOARD PARTITION
Brand- Gyproc
Price- 750/ sqm
Application- Home, Office
Color- White
Finish- Matte
Material- Gypsum
Thickness- 7- 15mm
Height- 1.8m
DRYWALL PARTIONING SYSTEM
Brand- V.K. Sharma & Co.
Price- 1,610/ sqm
Use- House, Shop
POLYEX BROWN PVC PARTITION
Brand- Polyex
Price- 1,100/ sqm
Color- Brown
Thickness- 15- 18mm
Built type- Modular
Application- Home, Office

14. INTERNATIONAL MARKET SURVEY
 INLOOK PARTITION WALL SYSTEMS

15. GLASS WALL
• IT CREATES A CONTINUOUS AND TRANSPARENT SURFACE
• 4 MM GAP BETWEEN GLASS PANELS WHICH IS SEALED WITH
SILICONE OR SEALING STRIP
• GLASS CAN BE DECALED, SCREEN PRINTED, SANDBLASTED,
ELECTRICALLY DIMMING, CURVED, COLOURED OR DIGITAL
PRINTED.
• PREMISES: OFFICE AND BUSINESS PREMISES
• WALL THICKNESS: 102 MM
• GLASS PANEL WIDTH: 100-1500 MM
• MAXIMUM HEIGHT: 3000 MM
• STANDARD GLASS: 8 MM, 10 MM OR 12 MM TEMPERED OR
LAMINATED
• PROFILES: ALUMINIUM; POWDER COATED IN RAL COLOURS OR
ANODIZED
• SILICONE SEAL: CLEAR, GREY, BLACK OR OTHER COLOUR
• SEALING STRIP: TRANSPARENT STRIP OR RAL COLOURED
ALUMINIUM PROFILE
• SOUND INSULATION
SILICONE SEALED CORNER
SILICONE SEALED GAP
AND SCREEN PRINTED
PATTERN
STAINLESS BRUSHED
STEEL DOOR PULL
OFFICE CAMPUS, KUOPIO

16. DOUBLE-GLAZED SOUND INSULATING GLASS WALL
• TWO GLASS PANELS WITH DIFFERENT THICKNESSES AND AIR GAP BETWEEN THEM.
• VERTICAL GAP BETWEEN TWO GLASS PANELS CAN BE SEALED WITH SILICONE OR A SEALING
STRIP.
• SPECIAL SOUND INSULATING WOODEN HINGED DOOR CAN BE PROVIDED WITH THE GLASS
WALL.
• PREMISES: CONFERENCE ROOMS, LIBRARIES AND OTHER PREMISES THAT REQUIRE GOOD
SOUND INSULATION
• WALL THICKNESS: 100 MM
• GLASS PANEL WIDTH: 100-1500 MM
• MAXIMUM HEIGHT: 3000 MM
• STANDARD GLASS: 66.2 + 55.2, LAMINATED GLASS WITH NORMAL OR SOUND CONTROL
INTERLAYER, 55.2 + 44.2, LAMINATED GLASS WITH NORMAL OR SOUND CONTROL
INTERLAYER, 8 MM + 10 MM TEMPERED GLASS
• PROFILES: ALUMINIUM; POWDER COATED IN RAL COLOURS OR ANODIZED; SPECIAL
COLOURS ALSO AVAILABLE
• SILICONE SEAL: GREY, BLACK, CLEAR OR ANOTHER COLOUR
• SEALING STRIP: TRANSPARENT STRIP
• SOUND INSULATION: RW 43 DB, 66.2 + 55.2 + SPECIAL HINGED DOOR
INLOOK OFFICE, HELSINKI
TOP CORNER
TRANSPARENT SEALING STRIP

17. SLIDING GLASS WALL
• LIGHT AND STYLISH GLASS WALL WITH ALUMINIUM
FRAME.
• CONSIST OF FIXED GLASS PANELS AND SLIDING
DOORS.
• THE GLASS CAN BE DECALED, SCREEN PRINTED,
SANDBLASTED, ELECTRICALLY DIMMING,
COLOURED OR DIGITAL PRINTED.
• PREMISES: OFFICE AND BUSINESS PREMISES
• WALL THICKNESS: 102 MM
• GLASS PANEL WIDTH: 100-1500 MM
• MAXIMUM HEIGHT: 3000 MM
• STANDARD GLASS: 6 MM OR 8 MM TEMPERED OR
LAMINATED GLASS; THE GLASS MAY ALSO BE BOTH
LAMINATED AND TEMPERED
• PROFILES: ALUMINIUM; POWDER COATED IN RAL
COLOURS OR ANODIZED; SPECIAL COLOURS ALSO
AVAILABLE
PORT CENTER, TURKU
ABLOY OF433 LOCK
ABLOY LC306 LOCK CASE
INLOOK 20/300
STAINLESS BRUSHED
STEEL DOOR PULL
INLOOK L-150 DOOR PULL
SLIDING DOOR THRESHOLD

18. SOUND INSULATING SLIDING GLASS WALL
• SLIDING GLASS WALL FOR PREMISES WITH SOUND INSULATION
REQUIREMENTS.
• PREMISES: OFFICE AND BUSINESS PREMISES
• WALL THICKNESS: 102 MM
• GLASS PANEL WIDTH: 100-1500 MM
• MAXIMUM HEIGHT: 3000 MM
• STANDARD GLASS: 44.2, LAMINATED GLASS WITH SOUND
CONTROL INTERLAYER
• PROFILES: ALUMINIUM; POWDER COATED IN RAL COLOURS OR
ANODIZED; SPECIAL COLOURS ALSO AVAILABLE
• SEALING: DB BRUSH SEALS – GREY; DB SLIDING DOOR SEAL –
BLACK; RUBBER GLASS SEALS – BLACK
• SOUND INSULATION: SOUND CLASS 25 DB (RW 30 DB);
WIDE THRESHOLD FOR SLIDING DOOR
SVENSKA LITTERATURSÄLLSKAPET I
FINLAND, HELSINKI

19. LIGHT REMOVABLE GLASS WALL
• GLASS WALL PANELS CAN TEMPORARILY BE
STORED ASIDE.
• PREMISES: OFFICES, RESTAURANTS AND HOTELS
• MAXIMUM HEIGHT: 2600 MM
• MAXIMUM PANEL WIDTH: 950 MM
• MAXIMUM PANEL WEIGHT: 60 KG
• MAXIMUM NUMBER OF PANELS: 9 GLASS
PANELS / WALL
• GLASS: 8 MM OR 10 MM TEMPERED GLASS
• PROFILES: ALUMINIUM; ANODIZED; STAINLESS
STEEL SURFACE OF PAINTED IN A RAL COLOUR;
TOP TRACK ALWAYS NATURAL ANODIZED
BOTTOM GUIDE TRACK

20. REMOVABLE GLASS WALL FOR SHOPPING CENTERS
AND PUBLIC PREMISES
• MODIFIABLE GLASS WALL WITH PANELS WHICH CAN
TEMPORARILY BE STORED ASIDE.
• THE GLASS WALL CAN BE STRAIGHT OR CURVED,
CORNER SOLUTIONS ARE ALSO AVAILABLE.
• SLIDING HINGED DOOR PANELS CAN BE USED WITH
THE SYSTEM.
• PREMISES: PUBLIC PREMISES, SHOPPING CENTER
• MAXIMUM HEIGHT: 3500 MM; 3000 MM WITH SLIDING
HINGED PANELS,
• MAXIMUM PANEL WIDTH: 1500 MM; 1100 MM WITH
SLIDING HINGED PANELS,
• MAXIMUM PANEL WEIGHT: 150 KG
• GLASS: 10 MM OR 12 MM TEMPERED OR LAMINATED
GLASS

21. WOOD FRAMED GLASS WALL
• FRAME CAN BE PAINTED OR VENEERED.
• THE GLASS CAN BE DECALED, SCREEN PRINTED, DIGITAL
PRINTED OR SANDBLASTED.
• SLIDING OR HINGED DOORS AND ELECTRICAL MODULES
CAN BE USED WITH THE SYSTEM.
• PREMISES: OFFICES, CONFERENCE ROOMS AND PUBLIC
PREMISES
• WALL THICKNESS: 92 MM OR OTHER THICKNESS
• GLASS PANEL WIDTH: 100-1500 MM
• MAXIMUM HEIGHT: 3000 MM
• STANDARD GLASS: 6 MM, 8 MM AND 12 MM TEMPERED OR
LAMINATED GLASS
• PROFILES: PAINTED WOOD (TIKKURILA SYMPHONY, NCS
OR RAL COLOURS), OR VENEER WITH VARIOUS SURFACE
TREATMENTS
• DOORS: HINGED DOORS; REBATED OR NON-REBATED;
NORMAL OR L-FRAME
• SOUND INSULATION:
TECHNOPOLIS INNOVA 4,
JYVÄSKYLÄ
GLASS DOOR
NON-REBATED DOOR

22. WOOD FRAMED GLASS WALL WITH ALUMINIUM
GLAZING PROFILES
• THE GLASS CAN BE DECALED, SCREEN PRINTED, DIGITAL
PRINTED OR SANDBLASTED.
• SLIDING OR HINGED DOORS AND ELECTRICAL MODULES
CAN BE USED WITH THE SYSTEM.
• PREMISES: OFFICES, CONFERENCE ROOMS AND PUBLIC
PREMISES
• WALL THICKNESS: 92 MM OR OTHER THICKNESS
• GLASS PANEL WIDTH: 100-1500 MM
• MAXIMUM HEIGHT: 3000 MM
• STANDARD GLASS: 6 MM, 8 MM AND 12 MM TEMPERED
OR LAMINATED GLASS;
• PROFILES: PAINTED WOOD (TIKKURILA SYMPHONY, NCS
OR RAL COLOURS), OR VENEER WITH VARIOUS SURFACE
TREATMENTS; ALUMINIUM GLAZING PROFILE POWDER
COATED IN RAL COLOURS
• DOORS: HINGED DOORS; REBATED OR NON-REBATED;
NORMAL OR L-FRAME
• SOUND INSULATION:
ALUMINIUM GLAZING PROFILES
MOTONET OFFICE, TURKU

23. INLOOK PHONE BOOTH
• GLASS DOOR AND WALLS; GLASS
CAN BE DECALED
• SOUND INSULATION 30 DB
• EXHAUST FAN AND LIGHT WITH
MOTION SENSOR
• STANDARD DIMENSIONS:
• WIDTH: 1050 MM
• DEPTH 1050 MM
• HEIGHT: 2150-2350 MM
• HEIGHT WITH WHEELS: 2300-
2500 MM

24. MODULAR SOUND INSULATED CONFERENCE ROOM
• GLASS FRONT WALL; GLASS CAN BE
DECALED
• SLIDING OR HINGED DOOR
• SOUND ABSORBING PANELS INSIDE
• STANDARD DIMENSIONS:
• WIDTH: 1050 MM
• DEPTH: 1650 MM
• HEIGHT: 2400 MM
POSTITALO, HELSINKI

25. REPRESENTATIVE AND SOUND ABSORBING
SURFACES
• MATERIAL: FIBRE GYPSUM, CEMENT
CHIPBOARD, MDF, GLASS OR ACOUSTIC
PANEL
• SURFACE: PAINTED, VENEERED,
LAMINATED, COLOURED GLASS OR
FABRIC-COVERED.
HELSINKI-VANTAAAIRPORT
SHOPPING MALL ZEPPELIN,
OULU
FINNISH NATURE CENTRE
HALTIA, ESPOO
SERLACHIUS MUSEUM, GÖSTA
PAVILION, MÄNTTÄ

26. PARTITION WALL
• CONSIST OF V-JOINTED PANELS.
• THE FRAME OF THE WALL CONSISTS OF SPRING-LOADED
VERTICAL STEEL STUDS WHICH SECURE THE WALL TIGHTLY
BETWEEN THE FLOOR AND THE CEILING.
• THE SURFACE PANELS ARE 13 MM WALLPAPERED GYPSUM, 12
MM FACTORY PAINTED MDF PANELS OR HARDWOOD
VENEERED MDF PANELS.
• USES: OFFICES AND PRODUCTION FACILITIES
• WALL THICKNESS: FLEXY 98 MM, FLEXY DB 124 MM
• VERTICAL STUD: WIDTH 72 MM, MATERIAL STRENGTH 0.7
MM
• STUD SPACING: 900 MM
• PANEL HEIGHT: 3300 MM
• INSULATION MATERIAL: MINERAL WOOL, THICKNESS 50
MM, DENSITY 30 KG/M3, NON-FLAMMABLE
• SOUND INSULATION:
SERVICA, KUOPIO

27. PARTITION WALL
• IT IS A PARTITION WALL WITH HAT
PROFILE JOINTS.
• THE SURFACE PANELS ARE FIXED TO
THE FRAME WITH HAT PROFILES.
• THE SURFACE PANELS ARE 13 MM
GYPSUM OR 12 MM FACTORY PAINTED
MDF PANELS.
• USES: OFFICES AND PRODUCTION
FACILITIES
• WALL THICKNESS: HANDY 98 MM,
HANDY DB 124 MM
• VERTICAL ROD: WIDTH 72 MM,
MATERIAL STRENGTH 0.7 MM
• STUD SPACING: 900 MM
• PANEL HEIGHT: 3000 MM, 3300 MM
• INSULATION MATERIAL: MINERAL
WOOL, THICKNESS 50 MM, DENSITY
ABOUT 30 KG/M3, NON-FLAMMABLE
• SOUND INSULATION:
TECHNOPOLIS INNOVA 4, JYVÄSKYLÄ
HAT PROFILE, END CAP COAT HOOK NOTICE BOARD
HOOK
NOTICE BOARD
SHELF MARKER BOARD MAGAZINE HOLDER

28. ELEMENT PARTITION WALL
• CONSISTS OF READY-MADE WALL
ELEMENTS WITH BUTT JOINTS.
• THE SURFACE OPTIONS ARE 11 MM
WALLPAPERED CHIPBOARD OR 9
MM/12 MM FACTORY PAINTED MDF.
• THE FRAME IS USUALLY GLUED
LAMINATED WOOD. WINDOWS AND
HINGED DOORS ARE AVAILABLE
FOR THE SYSTEM.
• USES: OFFICES, CUSTOMERS
SERVICE FACILITIES
• WALL THICKNESS: 76-98 MM
• STANDARD PANEL WIDTH: 600
MM
• MAXIMUM WALL HEIGHT: 3300
MM
• INSULATION MATERIAL: MINERAL
WOOL, THICKNESS 50 MM,
DENSITY ABOUT 30 KG/M3, NON-
FLAMMABLE
STENBERGINRANTA 2, HELSINKI
PASILA RAILWAY
STATION, HELSINKI
PASILA RAILWAY STATION, HELSINKI