Radio Frequency Identification RFID technology is widely used in various applications such as attendance system, tracking system, monitoring system or parking system. In this paper, the Parking Lot Security System using RFID technology and embedded technology is presented. In conventional parking system, manual entrance system is applied that permission must be requested from the security guard to access the premise. Therefore, a security guard has to be hired to monitor the premise. In addition, the security guards need to monitor all movement of the vehicle that enters or leave the premise. As a result, the unauthorized vehicle can easily access the premise. To address this problem, the proposed system which can control a vehicle's movement that enters or leave the specific area or place by scanning the RFID tag has been implemented. The potential benefit is it can improve security for both security guards and users. Besides that, this parking system can facilitate access control for users and improve traffic flow and reduce traffic jams. Dr. Thida Aung "Parking Lot Security System using RFID Technology" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019, URL: https://www.ijtsrd.com/papers/ijtsrd26512.pdfPaper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/26512/parking-lot-security-system-using-rfid-technology/dr-thida-aung
Design of intelligent transport related issue system based on arm7eSAT Journals
Abstract Now-a-days mode of transportation playing a major role in transport related problems. Every day millions of vehicles are passing through roads, mainly in this transport related issues Time, safety and efficiency are the major factors why because mode of transportation plays an important role in urbanization. Through this paper integrated solution has been offered to the transport related issues based on ARM7. Hence ARM7 is the core which has hardware modules such as RFID,GSM and SPEED SENSOR(split counter) to handle the new transport related problems viz., special zone(school zones, hospital zones, army zones) ,toll gate control, parking slot management and traffic rule violation control are explained in this paper. A professional exploitation of communication link between RF Modems over a wireless channel to facilitate vehicle monitoring, vehicle verification and automated toll collection on highways is proposed Keywords: GSM, IR SENSOR, RFIDTAG, RFID READER, SPEED SENSOR (SPLIT COUNTER)
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology.
Presently demand for cars going up at the rate of 15% per annum.
Presently 15 lacs vehicles being sold every year.
Making roads more expensive than parking infrastructure.
Cars being parked on roads causing traffic congestion and pollution.
By the above points we can say that the demand of
automatic vehicle access control system will increase.
Design of intelligent transport related issue system based on arm7eSAT Journals
Abstract Now-a-days mode of transportation playing a major role in transport related problems. Every day millions of vehicles are passing through roads, mainly in this transport related issues Time, safety and efficiency are the major factors why because mode of transportation plays an important role in urbanization. Through this paper integrated solution has been offered to the transport related issues based on ARM7. Hence ARM7 is the core which has hardware modules such as RFID,GSM and SPEED SENSOR(split counter) to handle the new transport related problems viz., special zone(school zones, hospital zones, army zones) ,toll gate control, parking slot management and traffic rule violation control are explained in this paper. A professional exploitation of communication link between RF Modems over a wireless channel to facilitate vehicle monitoring, vehicle verification and automated toll collection on highways is proposed Keywords: GSM, IR SENSOR, RFIDTAG, RFID READER, SPEED SENSOR (SPLIT COUNTER)
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology.
Presently demand for cars going up at the rate of 15% per annum.
Presently 15 lacs vehicles being sold every year.
Making roads more expensive than parking infrastructure.
Cars being parked on roads causing traffic congestion and pollution.
By the above points we can say that the demand of
automatic vehicle access control system will increase.
Rotary RFID Parking Management Solution Controlled By MicrocontrollerIJSRD
This paper led emphasis over the automatic parking system. The reason behind this research work is to eradicate the traffic problem arise during the rush hours in day time. Implementation of intelligent parking also helpful in security purpose this research paper is based on RFID based technology along with IR communication. The main governing body is microcontroller. RFID means radio frequency identification, this technology has been used for since last two decades, reason behind this technology is quite straight as it is capable of providing new services and convenience in retail environment. This technology is very reliable as well as very user friendly. This also ease the security purpose, this also reduced time consumption of user. This research involved following components (a) IR based communication, (b) RFID Module, (c) Microcontroller ATmega328.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
The objective of this project is to design a “RFID based access control system”. The sole aim of this project is to avoid the entry of any unwanted/burglar person to some restricted area along with the study of RFID and its use in this type of application.
This paper represents the RFID and GSM technology. The main objective of the system is to uniquely identify and to make security for a person. This requires a unique product,which has the capability of distinguishing different person. This is possible by the new emerging technology RFID (Radio Frequency Identification). The main parts of an RFID system ar e RFID tag (with unique ID number) and RFID reader (for reading the RFID tag). In this system,RFID ta g and RFID reader used are operating at 125 KHz. The microcontroller internal memory is used for storing the details.
Rfid based access control system using microcontrollerrajkanakaraj007
RFID Security Access Control System using 8051 Microcontroller is an RFID Technology based security system.
Using this system, authorization of personnel is carried out with an RFID card and only those with access can enter a secured area.
The security of any organisation is a priority for the authorities. The security concern is for the physical property and also for the intellectual property.
For this reason automatic identification and access control system has become necessary to overcome the security threats faced by many organisations.
This project deals with an interesting manner of security access control with the help of RFID Technology, where only people with valid cards are allowed to access the door or any secure area.
Rfid based vechile parking management systemSaurav Suman
Operating a managed, busy parking lot can pose significant challenges; especially where there is limited parking slots are available. Apartments/Residential complexes are normally providing parking facility only to owner’s vehicle and the visitor’s vehicle should be parked outside.
The common pain area in Apartment parking area is to identify the owner’s vehicle.
Security person at the gate need to manually identify the owner and the vehicle. If
identified, the gate will be manually opened for parking the vehicle inside the apartment. This manual identification is a time consuming process and can cause misidentification many times. Security person has to remember the vehicle registrations numbers
Monitoring and Centering a Remote Discrete Using Rfid through Sim Moduleinventionjournals
International Journal of Engineering and Science Invention (IJESI) is an international journal intended for professionals and researchers in all fields of computer science and electronics. IJESI publishes research articles and reviews within the whole field Engineering Science and Technology, new teaching methods, assessment, validation and the impact of new technologies and it will continue to provide information on the latest trends and developments in this ever-expanding subject. The publications of papers are selected through double peer reviewed to ensure originality, relevance, and readability. The articles published in our journal can be accessed online.
The system uses smart card technology to identify the authorized personnel and then process all the passport details pertaining to him/her, for necessary verification by authorities concerned.
For more details: http://www.edgefxkits.com/
Fingerprint Attendance System - the hand-held device for classroom attendancemohamedbasheerkp
Fingerprint attendance system is a hand-held device which aims to automate entire attendance procedure of classroom using biometric technology. The device can be carried to the classroom and can be passed to the students. The hand-held device can take attendance without the intervention of teacher. This device would operate from a rechargeable Li-ion battery. The GUI application would help the teacher to manage the device through a host PC.
Rotary RFID Parking Management Solution Controlled By MicrocontrollerIJSRD
This paper led emphasis over the automatic parking system. The reason behind this research work is to eradicate the traffic problem arise during the rush hours in day time. Implementation of intelligent parking also helpful in security purpose this research paper is based on RFID based technology along with IR communication. The main governing body is microcontroller. RFID means radio frequency identification, this technology has been used for since last two decades, reason behind this technology is quite straight as it is capable of providing new services and convenience in retail environment. This technology is very reliable as well as very user friendly. This also ease the security purpose, this also reduced time consumption of user. This research involved following components (a) IR based communication, (b) RFID Module, (c) Microcontroller ATmega328.
Rotary RFID Parking Management Solution Controlled By MicrocontrollerIJSRD
This paper led emphasis over the automatic parking system. The reason behind this research work is to eradicate the traffic problem arise during the rush hours in day time. Implementation of intelligent parking also helpful in security purpose this research paper is based on RFID based technology along with IR communication. The main governing body is microcontroller. RFID means radio frequency identification, this technology has been used for since last two decades, reason behind this technology is quite straight as it is capable of providing new services and convenience in retail environment. This technology is very reliable as well as very user friendly. This also ease the security purpose, this also reduced time consumption of user. This research involved following components (a) IR based communication, (b) RFID Module, (c) Microcontroller ATmega328.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
The objective of this project is to design a “RFID based access control system”. The sole aim of this project is to avoid the entry of any unwanted/burglar person to some restricted area along with the study of RFID and its use in this type of application.
This paper represents the RFID and GSM technology. The main objective of the system is to uniquely identify and to make security for a person. This requires a unique product,which has the capability of distinguishing different person. This is possible by the new emerging technology RFID (Radio Frequency Identification). The main parts of an RFID system ar e RFID tag (with unique ID number) and RFID reader (for reading the RFID tag). In this system,RFID ta g and RFID reader used are operating at 125 KHz. The microcontroller internal memory is used for storing the details.
Rfid based access control system using microcontrollerrajkanakaraj007
RFID Security Access Control System using 8051 Microcontroller is an RFID Technology based security system.
Using this system, authorization of personnel is carried out with an RFID card and only those with access can enter a secured area.
The security of any organisation is a priority for the authorities. The security concern is for the physical property and also for the intellectual property.
For this reason automatic identification and access control system has become necessary to overcome the security threats faced by many organisations.
This project deals with an interesting manner of security access control with the help of RFID Technology, where only people with valid cards are allowed to access the door or any secure area.
Rfid based vechile parking management systemSaurav Suman
Operating a managed, busy parking lot can pose significant challenges; especially where there is limited parking slots are available. Apartments/Residential complexes are normally providing parking facility only to owner’s vehicle and the visitor’s vehicle should be parked outside.
The common pain area in Apartment parking area is to identify the owner’s vehicle.
Security person at the gate need to manually identify the owner and the vehicle. If
identified, the gate will be manually opened for parking the vehicle inside the apartment. This manual identification is a time consuming process and can cause misidentification many times. Security person has to remember the vehicle registrations numbers
Monitoring and Centering a Remote Discrete Using Rfid through Sim Moduleinventionjournals
International Journal of Engineering and Science Invention (IJESI) is an international journal intended for professionals and researchers in all fields of computer science and electronics. IJESI publishes research articles and reviews within the whole field Engineering Science and Technology, new teaching methods, assessment, validation and the impact of new technologies and it will continue to provide information on the latest trends and developments in this ever-expanding subject. The publications of papers are selected through double peer reviewed to ensure originality, relevance, and readability. The articles published in our journal can be accessed online.
The system uses smart card technology to identify the authorized personnel and then process all the passport details pertaining to him/her, for necessary verification by authorities concerned.
For more details: http://www.edgefxkits.com/
Fingerprint Attendance System - the hand-held device for classroom attendancemohamedbasheerkp
Fingerprint attendance system is a hand-held device which aims to automate entire attendance procedure of classroom using biometric technology. The device can be carried to the classroom and can be passed to the students. The hand-held device can take attendance without the intervention of teacher. This device would operate from a rechargeable Li-ion battery. The GUI application would help the teacher to manage the device through a host PC.
Rotary RFID Parking Management Solution Controlled By MicrocontrollerIJSRD
This paper led emphasis over the automatic parking system. The reason behind this research work is to eradicate the traffic problem arise during the rush hours in day time. Implementation of intelligent parking also helpful in security purpose this research paper is based on RFID based technology along with IR communication. The main governing body is microcontroller. RFID means radio frequency identification, this technology has been used for since last two decades, reason behind this technology is quite straight as it is capable of providing new services and convenience in retail environment. This technology is very reliable as well as very user friendly. This also ease the security purpose, this also reduced time consumption of user. This research involved following components (a) IR based communication, (b) RFID Module, (c) Microcontroller ATmega328.
RFID based smart shopping cart and billing systemlaharipothula
To make the shopping easy by automated billing at the shopping mall/ super maeket. This module mainly cocnsists of Arduino, RFID tags & reader and zigbee module.
IOT Based Smart Parking and Damage Detection Using RFIDMaheshMoses
The proposed Smart Parking framework comprises an IoT module that is utilized to screen and signalize the condition of accessibility of a single parking spot The damage detection of the car can be detected using a vibration sensor
This is an RFID based automatic license and RC book verifciation system designed for the protection and authorization of vehicles. It is widely employed for the theft protection of the vehicles.
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
‘Six Sigma Technique’ A Journey Through its Implementationijtsrd
The manufacturing industries all over the world are facing tough challenges for growth, development and sustainability in today’s competitive environment. They have to achieve apex position by adapting with the global competitive environment by delivering goods and services at low cost, prime quality and better price to increase wealth and consumer satisfaction. Cost Management ensures profit, growth and sustainability of the business with implementation of Continuous Improvement Technique like Six Sigma. This leads to optimize Business performance. The method drives for customer satisfaction, low variation, reduction in waste and cycle time resulting into a competitive advantage over other industries which did not implement it. The main objective of this paper ‘Six Sigma Technique A Journey Through Its Implementation’ is to conceptualize the effectiveness of Six Sigma Technique through the journey of its implementation. Aditi Sunilkumar Ghosalkar "‘Six Sigma Technique’: A Journey Through its Implementation" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd64546.pdf Paper Url: https://www.ijtsrd.com/other-scientific-research-area/other/64546/‘six-sigma-technique’-a-journey-through-its-implementation/aditi-sunilkumar-ghosalkar
Edge Computing in Space Enhancing Data Processing and Communication for Space...ijtsrd
Edge computing, a paradigm that involves processing data closer to its source, has gained significant attention for its potential to revolutionize data processing and communication in space missions. With the increasing complexity and data volume generated by modern space missions, traditional centralized computing approaches face challenges related to latency, bandwidth, and security. Edge computing in space, involving on board processing and analysis of data, offers promising solutions to these challenges. This paper explores the concept of edge computing in space, its benefits, applications, and future prospects in enhancing space missions. Manish Verma "Edge Computing in Space: Enhancing Data Processing and Communication for Space Missions" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd64541.pdf Paper Url: https://www.ijtsrd.com/computer-science/artificial-intelligence/64541/edge-computing-in-space-enhancing-data-processing-and-communication-for-space-missions/manish-verma
Dynamics of Communal Politics in 21st Century India Challenges and Prospectsijtsrd
Communal politics in India has evolved through centuries, weaving a complex tapestry shaped by historical legacies, colonial influences, and contemporary socio political transformations. This research comprehensively examines the dynamics of communal politics in 21st century India, emphasizing its historical roots, socio political dynamics, economic implications, challenges, and prospects for mitigation. The historical perspective unravels the intricate interplay of religious identities and power dynamics from ancient civilizations to the impact of colonial rule, providing insights into the evolution of communalism. The socio political dynamics section delves into the contemporary manifestations, exploring the roles of identity politics, socio economic disparities, and globalization. The economic implications section highlights how communal politics intersects with economic issues, perpetuating disparities and influencing resource allocation. Challenges posed by communal politics are scrutinized, revealing multifaceted issues ranging from social fragmentation to threats against democratic values. The prospects for mitigation present a multifaceted approach, incorporating policy interventions, community engagement, and educational initiatives. The paper conducts a comparative analysis with international examples, identifying common patterns such as identity politics and economic disparities. It also examines unique challenges, emphasizing Indias diverse religious landscape, historical legacy, and secular framework. Lessons for effective strategies are drawn from international experiences, offering insights into inclusive policies, interfaith dialogue, media regulation, and global cooperation. By scrutinizing historical epochs, contemporary dynamics, economic implications, and international comparisons, this research provides a comprehensive understanding of communal politics in India. The proposed strategies for mitigation underscore the importance of a holistic approach to foster social harmony, inclusivity, and democratic values. Rose Hossain "Dynamics of Communal Politics in 21st Century India: Challenges and Prospects" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd64528.pdf Paper Url: https://www.ijtsrd.com/humanities-and-the-arts/history/64528/dynamics-of-communal-politics-in-21st-century-india-challenges-and-prospects/rose-hossain
Assess Perspective and Knowledge of Healthcare Providers Towards Elehealth in...ijtsrd
Background and Objective Telehealth has become a well known tool for the delivery of health care in Saudi Arabia, and the perspective and knowledge of healthcare providers are influential in the implementation, adoption and advancement of the method. This systematic review was conducted to examine the current literature base regarding telehealth and the related healthcare professional perspective and knowledge in the Kingdom of Saudi Arabia. Materials and Methods This systematic review was conducted by searching 7 databases including, MEDLINE, CINHAL, Web of Science, Scopus, PubMed, PsycINFO, and ProQuest Central. Studies on healthcare practitioners telehealth knowledge and perspectives published in English in Saudi Arabia from 2000 to 2023 were included. Boland directed this comprehensive review. The researchers examined each connected study using the AXIS tool, which evaluates cross sectional systematic reviews. Narrative synthesis was used to summarise and convey the data. Results Out of 1840 search results, 10 studies were included. Positive outlook and limited knowledge among providers were seen across trials. Healthcare professionals like telehealth for its ability to improve quality, access, and delivery, save time and money, and be successful. Age, gender, occupation, and work experience also affect health workers knowledge. In Saudi Arabia, healthcare professionals face inadequate expert assistance, patient privacy, internet connection concerns, lack of training courses, lack of telehealth understanding, and high costs while performing telemedicine. Conclusions Healthcare practitioners telehealth perceptions and knowledge were examined in this systematic study. Its collection of concerned experts different personal attitudes and expertise would help enhance telehealths implementation in Saudi Arabia, develop its healthcare delivery alternative, and eliminate frequent problems. Badriah Mousa I Mulayhi | Dr. Jomin George | Judy Jenkins "Assess Perspective and Knowledge of Healthcare Providers Towards Elehealth in Saudi Arabia: A Systematic Review" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd64535.pdf Paper Url: https://www.ijtsrd.com/medicine/other/64535/assess-perspective-and-knowledge-of-healthcare-providers-towards-elehealth-in-saudi-arabia-a-systematic-review/badriah-mousa-i-mulayhi
The Impact of Digital Media on the Decentralization of Power and the Erosion ...ijtsrd
The impact of digital media on the distribution of power and the weakening of traditional gatekeepers has gained considerable attention in recent years. The adoption of digital technologies and the internet has resulted in declining influence and power for traditional gatekeepers such as publishing houses and news organizations. Simultaneously, digital media has facilitated the emergence of new voices and players in the media industry. Digital medias impact on power decentralization and gatekeeper erosion is visible in several ways. One significant aspect is the democratization of information, which enables anyone with an internet connection to publish and share content globally, leading to citizen journalism and bypassing traditional gatekeepers. Another aspect is the disruption of conventional media industry business models, as traditional organizations struggle to adjust to the decrease in advertising revenue and the rise of digital platforms. Alternative business models, such as subscription models and crowdfunding, have become more prevalent, leading to the emergence of new players. Overall, the impact of digital media on the distribution of power and the weakening of traditional gatekeepers has brought about significant changes in the media landscape and the way information is shared. Further research is required to fully comprehend the implications of these changes and their impact on society. Dr. Kusum Lata "The Impact of Digital Media on the Decentralization of Power and the Erosion of Traditional Gatekeepers" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd64544.pdf Paper Url: https://www.ijtsrd.com/humanities-and-the-arts/political-science/64544/the-impact-of-digital-media-on-the-decentralization-of-power-and-the-erosion-of-traditional-gatekeepers/dr-kusum-lata
Online Voices, Offline Impact Ambedkars Ideals and Socio Political Inclusion ...ijtsrd
This research investigates the nexus between online discussions on Dr. B.R. Ambedkars ideals and their impact on social inclusion among college students in Gurugram, Haryana. Surveying 240 students from 12 government colleges, findings indicate that 65 actively engage in online discussions, with 80 demonstrating moderate to high awareness of Ambedkars ideals. Statistically significant correlations reveal that higher online engagement correlates with increased awareness p 0.05 and perceived social inclusion. Variations across colleges and a notable effect of college type on perceived social inclusion highlight the influence of contextual factors. Furthermore, the intersectional analysis underscores nuanced differences based on gender, caste, and socio economic status. Dr. Kusum Lata "Online Voices, Offline Impact: Ambedkar's Ideals and Socio-Political Inclusion - A Study of Gurugram District" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd64543.pdf Paper Url: https://www.ijtsrd.com/humanities-and-the-arts/political-science/64543/online-voices-offline-impact-ambedkars-ideals-and-sociopolitical-inclusion--a-study-of-gurugram-district/dr-kusum-lata
Problems and Challenges of Agro Entreprenurship A Studyijtsrd
Noting calls for contextualizing Agro entrepreneurs problems and challenges of the agro entrepreneurs and for greater attention to the Role of entrepreneurs in agro entrepreneurship research, we conduct a systematic literature review of extent research in agriculture entrepreneurship to overcome the study objectives of complications of agro entrepreneurs through various factors, Development of agriculture products is a key factor for the overall economic growth of agro entrepreneurs Agro Entrepreneurs produces firsthand large scale employment, utilizes the labor and natural resources, This research outlines the problems of Weather and Soil Erosions, Market price fluctuation, stimulates labor cost problems, reduces concentration of Price volatility, Dependency on Intermediaries, induces Limited Bargaining Power, and Storage and Transportation Costs. This paper mainly devoted to highlight Problems and challenges faced for the sustainable of Agro Entrepreneurs in India. Vinay Prasad B "Problems and Challenges of Agro Entreprenurship - A Study" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd64540.pdf Paper Url: https://www.ijtsrd.com/other-scientific-research-area/other/64540/problems-and-challenges-of-agro-entreprenurship--a-study/vinay-prasad-b
Comparative Analysis of Total Corporate Disclosure of Selected IT Companies o...ijtsrd
Disclosure is a process through which a business enterprise communicates with external parties. A corporate disclosure is communication of financial and non financial information of the activities of a business enterprise to the interested entities. Corporate disclosure is done through publishing annual reports. So corporate disclosure through annual reports plays a vital role in the life of all the companies and provides valuable information to investors. The basic objectives of corporate disclosure is to give a true and fair view of companies to the parties related either directly or indirectly like owner, government, creditors, shareholders etc. in the companies act, provisions have been made about mandatory and voluntary disclosure. The IT sector in India is rapidly growing, the trend to invest in the IT sector is rising and employment opportunities in IT sectors are also increasing. Therefore the IT sector is expected to have fair, full and adequate disclosure of all information. Unfair and incomplete disclosure may adversely affect the entire economy. A research study on disclosure practices of IT companies could play an important role in this regard. Hence, the present research study has been done to study and review comparative analysis of total corporate disclosure of selected IT companies of India and to put forward overall findings and suggestions with a view to increase disclosure score of these companies. The researcher hopes that the present research study will be helpful to all selected Companies for improving level of corporate disclosure through annual reports as well as the government, creditors, investors, all business organizations and upcoming researcher for comparative analyses of level of corporate disclosure with special reference to selected IT companies. Dr. Vaibhavi D. Thaker "Comparative Analysis of Total Corporate Disclosure of Selected IT Companies of India" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd64539.pdf Paper Url: https://www.ijtsrd.com/other-scientific-research-area/other/64539/comparative-analysis-of-total-corporate-disclosure-of-selected-it-companies-of-india/dr-vaibhavi-d-thaker
The Impact of Educational Background and Professional Training on Human Right...ijtsrd
This study investigated the impact of educational background and professional training on human rights awareness among secondary school teachers in the Marathwada region of Maharashtra, India. The key findings reveal that higher levels of education, particularly a master’s degree, and fields of study related to education, humanities, or social sciences are associated with greater human rights awareness among teachers. Additionally, both pre service teacher training and in service professional development programs focused on human rights education significantly enhance teacher’s knowledge, skills, and competencies in promoting human rights principles in their classrooms. Baig Ameer Bee Mirza Abdul Aziz | Dr. Syed Azaz Ali Amjad Ali "The Impact of Educational Background and Professional Training on Human Rights Awareness among Secondary School Teachers" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd64529.pdf Paper Url: https://www.ijtsrd.com/humanities-and-the-arts/education/64529/the-impact-of-educational-background-and-professional-training-on-human-rights-awareness-among-secondary-school-teachers/baig-ameer-bee-mirza-abdul-aziz
A Study on the Effective Teaching Learning Process in English Curriculum at t...ijtsrd
“One Language sets you in a corridor for life. Two languages open every door along the way” Frank Smith English as a foreign language or as a second language has been ruling in India since the period of Lord Macaulay. But the question is how much we teach or learn English properly in our culture. Is there any scope to use English as a language rather than a subject How much we learn or teach English without any interference of mother language specially in the classroom teaching learning scenario in West Bengal By considering all these issues the researcher has attempted in this article to focus on the effective teaching learning process comparing to other traditional strategies in the field of English curriculum at the secondary level to investigate whether they fulfill the present teaching learning requirements or not by examining the validity of the present curriculum of English. The purpose of this study is to focus on the effectiveness of the systematic, scientific, sequential and logical transaction of the course between the teachers and the learners in the perspective of the 5Es programme that is engage, explore, explain, extend and evaluate. Sanchali Mondal | Santinath Sarkar "A Study on the Effective Teaching Learning Process in English Curriculum at the Secondary Level of West Bengal" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd62412.pdf Paper Url: https://www.ijtsrd.com/humanities-and-the-arts/education/62412/a-study-on-the-effective-teaching-learning-process-in-english-curriculum-at-the-secondary-level-of-west-bengal/sanchali-mondal
The Role of Mentoring and Its Influence on the Effectiveness of the Teaching ...ijtsrd
This paper reports on a study which was conducted to investigate the role of mentoring and its influence on the effectiveness of the teaching of Physics in secondary schools in the South West Region of Cameroon. The study adopted the convergent parallel mixed methods design, focusing on respondents in secondary schools in the South West Region of Cameroon. Both quantitative and qualitative data were collected, analysed separately, and the results were compared to see if the findings confirm or disconfirm each other. The quantitative analysis found that majority of the respondents 72 of Physics teachers affirmed that they had more experienced colleagues as mentors to help build their confidence, improve their teaching, and help them improve their effectiveness and efficiency in guiding learners’ achievements. Only 28 of the respondents disagreed with these statements. With majority respondents 72 agreeing with the statements, it implies that in most secondary schools, experienced Physics teachers act as mentors to build teachers’ confidence in teaching and improving students’ learning. The interview qualitative data analysis summarized how secondary school Principals use meetings with mentors and mentees to promote mentorship in the school milieu. This has helped strengthen teachers’ classroom practices in secondary schools in the South West Region of Cameroon. With the results confirming each other, the study recommends that mentoring should focus on helping teachers employ social interactions and instructional practices feedback and clarity in teaching that have direct measurable impact on students’ learning achievements. Andrew Ngeim Sumba | Frederick Ebot Ashu | Peter Agborbechem Tambi "The Role of Mentoring and Its Influence on the Effectiveness of the Teaching of Physics in Secondary Schools in the South West Region of Cameroon" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd64524.pdf Paper Url: https://www.ijtsrd.com/management/management-development/64524/the-role-of-mentoring-and-its-influence-on-the-effectiveness-of-the-teaching-of-physics-in-secondary-schools-in-the-south-west-region-of-cameroon/andrew-ngeim-sumba
Design Simulation and Hardware Construction of an Arduino Microcontroller Bas...ijtsrd
This study primarily focuses on the design of a high side buck converter using an Arduino microcontroller. The converter is specifically intended for use in DC DC applications, particularly in standalone solar PV systems where the PV output voltage exceeds the load or battery voltage. To evaluate the performance of the converter, simulation experiments are conducted using Proteus Software. These simulations provide insights into the input and output voltages, currents, powers, and efficiency under different state of charge SoC conditions of a 12V,70Ah rechargeable lead acid battery. Additionally, the hardware design of the converter is implemented, and practical data is collected through operation, monitoring, and recording. By comparing the simulation results with the practical results, the efficiency and performance of the designed converter are assessed. The findings indicate that while the buck converter is suitable for practical use in standalone PV systems, its efficiency is compromised due to a lower output current. Chan Myae Aung | Dr. Ei Mon "Design Simulation and Hardware Construction of an Arduino-Microcontroller Based DC-DC High-Side Buck Converter for Standalone PV System" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd64518.pdf Paper Url: https://www.ijtsrd.com/engineering/mechanical-engineering/64518/design-simulation-and-hardware-construction-of-an-arduinomicrocontroller-based-dcdc-highside-buck-converter-for-standalone-pv-system/chan-myae-aung
Sustainable Energy by Paul A. Adekunte | Matthew N. O. Sadiku | Janet O. Sadikuijtsrd
Energy becomes sustainable if it meets the needs of the present without compromising the ability of future generations to meet their own needs. Some of the definitions of sustainable energy include the considerations of environmental aspects such as greenhouse gas emissions, social, and economic aspects such as energy poverty. Generally far more sustainable than fossil fuel are renewable energy sources such as wind, hydroelectric power, solar, and geothermal energy sources. Worthy of note is that some renewable energy projects, like the clearing of forests to produce biofuels, can cause severe environmental damage. The sustainability of nuclear power which is a low carbon source is highly debated because of concerns about radioactive waste, nuclear proliferation, and accidents. The switching from coal to natural gas has environmental benefits, including a lower climate impact, but could lead to delay in switching to more sustainable options. “Carbon capture and storage” can be built into power plants to remove the carbon dioxide CO2 emissions, but this technology is expensive and has rarely been implemented. Leading non renewable energy sources around the world is fossil fuels, coal, petroleum, and natural gas. Nuclear energy is usually considered another non renewable energy source, although nuclear energy itself is a renewable energy source, but the material used in nuclear power plants is not. The paper addresses the issue of sustainable energy, its attendant benefits to the future generation, and humanity in general. Paul A. Adekunte | Matthew N. O. Sadiku | Janet O. Sadiku "Sustainable Energy" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd64534.pdf Paper Url: https://www.ijtsrd.com/engineering/electrical-engineering/64534/sustainable-energy/paul-a-adekunte
Concepts for Sudan Survey Act Implementations Executive Regulations and Stand...ijtsrd
This paper aims to outline the executive regulations, survey standards, and specifications required for the implementation of the Sudan Survey Act, and for regulating and organizing all surveying work activities in Sudan. The act has been discussed for more than 5 years. The Land Survey Act was initiated by the Sudan Survey Authority and all official legislations were headed by the Sudan Ministry of Justice till it was issued in 2022. The paper presents conceptual guidelines to be used for the Survey Act implementation and to regulate the survey work practice, standardizing the field surveys, processing, quality control, procedures, and the processes related to survey work carried out by the stakeholders and relevant authorities in Sudan. The conceptual guidelines are meant to improve the quality and harmonization of geospatial data and to aid decision making processes as well as geospatial information systems. The established comprehensive executive regulations will govern and regulate the implementation of the Sudan Survey Geomatics Act in all surveying and mapping practices undertaken by the Sudan Survey Authority SSA and state local survey departments for public or private sector organizations. The targeted standards and specifications include the reference frame, projection, coordinate systems, and the guidelines and specifications that must be followed in the field of survey work, processes, and mapping products. In the last few decades, there has been a growing awareness of the importance of geomatics activities and measurements on the Earths surface in space and time, together with observing and mapping the changes. In such cases, data must be captured promptly, standardized, and obtained with more accuracy and specified in much detail. The paper will also highlight the current situation in Sudan, the degree to which survey standards are used, the problems encountered, and the errors that arise from not using the standards and survey specifications. Kamal A. A. Sami "Concepts for Sudan Survey Act Implementations - Executive Regulations and Standards" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd63484.pdf Paper Url: https://www.ijtsrd.com/engineering/civil-engineering/63484/concepts-for-sudan-survey-act-implementations--executive-regulations-and-standards/kamal-a-a-sami
Towards the Implementation of the Sudan Interpolated Geoid Model Khartoum Sta...ijtsrd
The discussions between ellipsoid and geoid have invoked many researchers during the recent decades, especially during the GNSS technology era, which had witnessed a great deal of development but still geoid undulation requires more investigations. To figure out a solution for Sudans local geoid, this research has tried to intake the possibility of determining the geoid model by following two approaches, gravimetric and geometrical geoid model determination, by making use of GNSS leveling benchmarks at Khartoum state. The Benchmarks are well distributed in the study area, in which, the horizontal coordinates and the height above the ellipsoid have been observed by GNSS while orthometric heights were carried out using precise leveling. The Global Geopotential Model GGM represented in EGM2008 has been exploited to figure out the geoid undulation at the benchmarks in the study area. This is followed by a fitting process, that has been done to suit the geoid undulation data which has been computed using GNSS leveling data and geoid undulation inspired by the EGM2008. Two geoid surfaces were created after the fitting process to ensure that they are identical and both of them could be counted for getting the same geoid undulation with an acceptable accuracy. In this respect, statistical operation played an important role in ensuring the consistency and integrity of the model by applying cross validation techniques splitting the data into training and testing datasets for building the geoid model and testing its eligibility. The geometrical solution for geoid undulation computation has been utilized by applying straightforward equations that facilitate the calculation of the geoid undulation directly through applying statistical techniques for the GNSS leveling data of the study area to get the common equation parameters values that could be utilized to calculate geoid undulation of any position in the study area within the claimed accuracy. Both systems were checked and proved eligible to be used within the study area with acceptable accuracy which may contribute to solving the geoid undulation problem in the Khartoum area, and be further generalized to determine the geoid model over the entire country, and this could be considered in the future, for regional and continental geoid model. Ahmed M. A. Mohammed. | Kamal A. A. Sami "Towards the Implementation of the Sudan Interpolated Geoid Model (Khartoum State Case Study)" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd63483.pdf Paper Url: https://www.ijtsrd.com/engineering/civil-engineering/63483/towards-the-implementation-of-the-sudan-interpolated-geoid-model-khartoum-state-case-study/ahmed-m-a-mohammed
Activating Geospatial Information for Sudans Sustainable Investment Mapijtsrd
Sudan is witnessing an acceleration in the processes of development and transformation in the performance of government institutions to raise the productivity and investment efficiency of the government sector. The development plans and investment opportunities have focused on achieving national goals in various sectors. This paper aims to illuminate the path to the future and provide geospatial data and information to develop the investment climate and environment for all sized businesses, and to bridge the development gap between the Sudan states. The Sudan Survey Authority SSA is the main advisor to the Sudan Government in conducting surveying, mappings, designing, and developing systems related to geospatial data and information. In recent years, SSA made a strategic partnership with the Ministry of Investment to activate Geospatial Information for Sudans Sustainable Investment and in particular, for the preparation and implementation of the Sudan investment map, based on the directives and objectives of the Ministry of Investment MI in Sudan. This paper comes within the framework of activating the efforts of the Ministry of Investment to develop technical investment services by applying techniques adopted by the Ministry and its strategic partners for advancing investment processes in the country. Kamal A. A. Sami "Activating Geospatial Information for Sudan's Sustainable Investment Map" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd63482.pdf Paper Url: https://www.ijtsrd.com/engineering/information-technology/63482/activating-geospatial-information-for-sudans-sustainable-investment-map/kamal-a-a-sami
Educational Unity Embracing Diversity for a Stronger Societyijtsrd
In a rapidly changing global landscape, the importance of education as a unifying force cannot be overstated. This paper explores the crucial role of educational unity in fostering a stronger and more inclusive society through the embrace of diversity. By examining the benefits of diverse learning environments, the paper aims to highlight the positive impact on societal strength. The discussion encompasses various dimensions, from curriculum design to classroom dynamics, and emphasizes the need for educational institutions to become catalysts for unity in diversity. It highlights the need for a paradigm shift in educational policies, curricula, and pedagogical approaches to ensure that they are reflective of the diverse fabric of society. This paper also addresses the challenges associated with implementing inclusive educational practices and offers practical strategies for overcoming barriers. It advocates for collaborative efforts between educational institutions, policymakers, and communities to create a supportive ecosystem that promotes diversity and unity. Mr. Amit Adhikari | Madhumita Teli | Gopal Adhikari "Educational Unity: Embracing Diversity for a Stronger Society" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd64525.pdf Paper Url: https://www.ijtsrd.com/humanities-and-the-arts/education/64525/educational-unity-embracing-diversity-for-a-stronger-society/mr-amit-adhikari
Integration of Indian Indigenous Knowledge System in Management Prospects and...ijtsrd
The diversity of indigenous knowledge systems in India is vast and can vary significantly between different communities and regions. Preserving and respecting these knowledge systems is crucial for maintaining cultural heritage, promoting sustainable practices, and fostering cross cultural understanding. In this paper, an overview of the prospects and challenges associated with incorporating Indian indigenous knowledge into management is explored. It is found that IIKS helps in management in many areas like sustainable development, tourism, food security, natural resource management, cultural preservation and innovation, etc. However, IIKS integration with management faces some challenges in the form of a lack of documentation, cultural sensitivity, language barriers legal framework, etc. Savita Lathwal "Integration of Indian Indigenous Knowledge System in Management: Prospects and Challenges" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd63500.pdf Paper Url: https://www.ijtsrd.com/management/accounting-and-finance/63500/integration-of-indian-indigenous-knowledge-system-in-management-prospects-and-challenges/savita-lathwal
DeepMask Transforming Face Mask Identification for Better Pandemic Control in...ijtsrd
The COVID 19 pandemic has highlighted the crucial need of preventive measures, with widespread use of face masks being a key method for slowing the viruss spread. This research investigates face mask identification using deep learning as a technological solution to be reducing the risk of coronavirus transmission. The proposed method uses state of the art convolutional neural networks CNNs and transfer learning to automatically recognize persons who are not wearing masks in a variety of circumstances. We discuss how this strategy improves public health and safety by providing an efficient manner of enforcing mask wearing standards. The report also discusses the obstacles, ethical concerns, and prospective applications of face mask detection systems in the ongoing fight against the pandemic. Dilip Kumar Sharma | Aaditya Yadav "DeepMask: Transforming Face Mask Identification for Better Pandemic Control in the COVID-19 Era" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd64522.pdf Paper Url: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/64522/deepmask-transforming-face-mask-identification-for-better-pandemic-control-in-the-covid19-era/dilip-kumar-sharma
Streamlining Data Collection eCRF Design and Machine Learningijtsrd
Efficient and accurate data collection is paramount in clinical trials, and the design of Electronic Case Report Forms eCRFs plays a pivotal role in streamlining this process. This paper explores the integration of machine learning techniques in the design and implementation of eCRFs to enhance data collection efficiency. We delve into the synergies between eCRF design principles and machine learning algorithms, aiming to optimize data quality, reduce errors, and expedite the overall data collection process. The application of machine learning in eCRF design brings forth innovative approaches to data validation, anomaly detection, and real time adaptability. This paper discusses the benefits, challenges, and future prospects of leveraging machine learning in eCRF design for streamlined and advanced data collection in clinical trials. Dhanalakshmi D | Vijaya Lakshmi Kannareddy "Streamlining Data Collection: eCRF Design and Machine Learning" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd63515.pdf Paper Url: https://www.ijtsrd.com/biological-science/biotechnology/63515/streamlining-data-collection-ecrf-design-and-machine-learning/dhanalakshmi-d
Unit 8 - Information and Communication Technology (Paper I).pdfThiyagu K
This slides describes the basic concepts of ICT, basics of Email, Emerging Technology and Digital Initiatives in Education. This presentations aligns with the UGC Paper I syllabus.
The Roman Empire A Historical Colossus.pdfkaushalkr1407
The Roman Empire, a vast and enduring power, stands as one of history's most remarkable civilizations, leaving an indelible imprint on the world. It emerged from the Roman Republic, transitioning into an imperial powerhouse under the leadership of Augustus Caesar in 27 BCE. This transformation marked the beginning of an era defined by unprecedented territorial expansion, architectural marvels, and profound cultural influence.
The empire's roots lie in the city of Rome, founded, according to legend, by Romulus in 753 BCE. Over centuries, Rome evolved from a small settlement to a formidable republic, characterized by a complex political system with elected officials and checks on power. However, internal strife, class conflicts, and military ambitions paved the way for the end of the Republic. Julius Caesar’s dictatorship and subsequent assassination in 44 BCE created a power vacuum, leading to a civil war. Octavian, later Augustus, emerged victorious, heralding the Roman Empire’s birth.
Under Augustus, the empire experienced the Pax Romana, a 200-year period of relative peace and stability. Augustus reformed the military, established efficient administrative systems, and initiated grand construction projects. The empire's borders expanded, encompassing territories from Britain to Egypt and from Spain to the Euphrates. Roman legions, renowned for their discipline and engineering prowess, secured and maintained these vast territories, building roads, fortifications, and cities that facilitated control and integration.
The Roman Empire’s society was hierarchical, with a rigid class system. At the top were the patricians, wealthy elites who held significant political power. Below them were the plebeians, free citizens with limited political influence, and the vast numbers of slaves who formed the backbone of the economy. The family unit was central, governed by the paterfamilias, the male head who held absolute authority.
Culturally, the Romans were eclectic, absorbing and adapting elements from the civilizations they encountered, particularly the Greeks. Roman art, literature, and philosophy reflected this synthesis, creating a rich cultural tapestry. Latin, the Roman language, became the lingua franca of the Western world, influencing numerous modern languages.
Roman architecture and engineering achievements were monumental. They perfected the arch, vault, and dome, constructing enduring structures like the Colosseum, Pantheon, and aqueducts. These engineering marvels not only showcased Roman ingenuity but also served practical purposes, from public entertainment to water supply.
The Art Pastor's Guide to Sabbath | Steve ThomasonSteve Thomason
What is the purpose of the Sabbath Law in the Torah. It is interesting to compare how the context of the law shifts from Exodus to Deuteronomy. Who gets to rest, and why?
2024.06.01 Introducing a competency framework for languag learning materials ...Sandy Millin
http://sandymillin.wordpress.com/iateflwebinar2024
Published classroom materials form the basis of syllabuses, drive teacher professional development, and have a potentially huge influence on learners, teachers and education systems. All teachers also create their own materials, whether a few sentences on a blackboard, a highly-structured fully-realised online course, or anything in between. Despite this, the knowledge and skills needed to create effective language learning materials are rarely part of teacher training, and are mostly learnt by trial and error.
Knowledge and skills frameworks, generally called competency frameworks, for ELT teachers, trainers and managers have existed for a few years now. However, until I created one for my MA dissertation, there wasn’t one drawing together what we need to know and do to be able to effectively produce language learning materials.
This webinar will introduce you to my framework, highlighting the key competencies I identified from my research. It will also show how anybody involved in language teaching (any language, not just English!), teacher training, managing schools or developing language learning materials can benefit from using the framework.
Synthetic Fiber Construction in lab .pptxPavel ( NSTU)
Synthetic fiber production is a fascinating and complex field that blends chemistry, engineering, and environmental science. By understanding these aspects, students can gain a comprehensive view of synthetic fiber production, its impact on society and the environment, and the potential for future innovations. Synthetic fibers play a crucial role in modern society, impacting various aspects of daily life, industry, and the environment. ynthetic fibers are integral to modern life, offering a range of benefits from cost-effectiveness and versatility to innovative applications and performance characteristics. While they pose environmental challenges, ongoing research and development aim to create more sustainable and eco-friendly alternatives. Understanding the importance of synthetic fibers helps in appreciating their role in the economy, industry, and daily life, while also emphasizing the need for sustainable practices and innovation.
How to Create Map Views in the Odoo 17 ERPCeline George
The map views are useful for providing a geographical representation of data. They allow users to visualize and analyze the data in a more intuitive manner.
2. International Journal of Trend in Scientific Research and Development (IJTSRD) @ www.ijtsrd.com eISSN: 2456-6470
@ IJTSRD | Unique Paper ID – IJTSRD26512 | Volume – 3 | Issue – 5 | July - August 2019 Page 907
II. OPERATION OF THE SYSTEM
To get started with RFID-based car parking system,
the car owner has to first register the car with the
parking owner and get the RFID tag. The incoming
car drivers will be provided with an RFID card. The
car parking owner must keep the ID of RFID card
with a password and there is no limit quantity for
this case. RFID reader controlled with PIC is fixed at
the entrance gate to which the card bearing cars will
enter. When the car reaches the gate, the card will
be placed on the reader. As soon as the RFID tag is
read by the reader, the system automatically reads
the specified ID number from the RFID tag. If the
card is correct, the gate-rod will be lifted (open) by a
motor controlled with PIC microcontroller to allow
the car inside the parking area.
At the existing gate, two IR sensors are fixed to
detect the body of the car. Only then, when the car
reaches the exit gate, the gate-rod will be lifted
(open) by a motor controlled with PIC
microcontroller. The system also offers the facility
to recharge the amount for each RFID tag. No
manual processing is involved and in addition, the
system provides security. The flowchart of the
operation of the system is shown in Figure 2.
Figure2. Flow Chart of the Operation of the System
III. HARDWARE COMPONENTS
A. Arduino UNO-R3
It's an open-source physical computing platform
based on a simple microcontroller board and a
development environment for writing software for
the board. Arduino can be used to develop
interactive objects, taking inputs from a variety of
switches or sensors, and controlling a variety of
lights, motors, and other physical outputs An
Arduino is a tiny computer that you can program to
process inputs and outputs going to and from the
chip. It is connected to PC using the USB cable. It is
an open-source electronics prototyping platform
based on flexible, easy to use hardware and
software. It„is intended for artists, designers,
hobbyist and engineers. Arduino can sense the
environment by receiving input from a variety of
sensors and can affect its surroundings by
controlling lights, motor and other actuators. The
microcontroller on the board is programmed using
the Arduino programming language.
Figure 3. Arduino UNO-R3
B. PIC Microcontroller
PIC is a family of microcontrollers made by
Microchip Technology, derived from the PIC1650
originally developed by General Instrument's
Microelectronics Division. The name PIC initially
referred to Peripheral Interface Controller then it
was corrected as Programmable Intelligent
Computer. Early models of PIC had read-only
memory (ROM) or field-programmable EPROM for
program storage, some with provision for erasing
memory. All current models use flash memory for
program storage, and newer models allow the PIC to
reprogram itself. Program memory and data
memory are separated. Data memory is 8-bit, 16-bit,
and, in the latest models, 32-bit wide. Program
instructions vary in bit-count by family of PIC, and
maybe 12, 14, 16, or 24 bits long. The instruction set
also varies by model, with more powerful chips
adding instructions for digital signal processing
functions. Today, a huge variety of PICs are available
with various onboard peripherals (serial
communication modules, UARTs, motor control
kernels, etc.) and program memory from 256 words
to 64K words and more.
PIC 16F877 is chosen as the main controller for this
system because it meets the requirements of the
system and it has rich features. PIC 16F877 is the
mid-range pic and it has 40 pins.
3. International Journal of Trend in Scientific Research and Development (IJTSRD) @ www.ijtsrd.com eISSN: 2456-6470
@ IJTSRD | Unique Paper ID – IJTSRD26512 | Volume – 3 | Issue – 5 | July - August 2019 Page 908
Figure4. PIC 16F877 Microcontroller
C. RFID Reader
The RFID reader requires 5V supply (it can be
supplied from the same supply as PIC. This can read
125 kHz frequency and it is compatible with most
kinds of RF cards. It can be connected directly to PIC
microcontroller using the USART module to give
9600bps TTL and RS232 output.
RDM6300 125 KHz card mini-modules is designed
for reading code from 125KHz/ 134.2KHz card
compatible read-only tags and read/write a card. It
can be applied in office/home security, personal
identification, access control, and forgery,
interactive toy and production control systems etc.
RDM6300 Series non-contact RFID module, use the
advanced RF receiving circuit and embedded MCU
design, combing with high efficient decoding
algorithm, to finish the data receive of EM4100 and
all the compatible cards. This is a very popular RFID
card read module for microcontroller users, it can
read the 125K EM4100 series RFID card. This
module is easy to use, serial port connects to
microcontroller MCU after power-up, when the RFID
card enters into card reading range, this module will
send the card number to the microcontroller by
UART.
Figure 5.RFID RDM3600
D. Stepper Motor
A stepper motor is an electromechanical device
which converts electrical pulses into discrete
mechanical movements. The shaft or spindle of a
stepper motor rotates indiscrete step increments
when electrical command pulses are applied to it in
the proper sequence. The motors rotation has
several direct relationships to these applied input
pulses. The sequence of the applied pulses is
directly related to the direction of motor shafts
rotation. The speed of the motor shafts rotation is
directly related to the frequency of the input pulses
and the length of rotation is directly related to the
number of input pulses applied. One of the most
significant advantages of a stepper motor is its
ability to be accurately controlled in an open-loop
system. Open-loop control means no feedback
information about the position is needed. This type
of control eliminates the need for expensive sensing
and feedback devices such as optical encoders.
Figure 6. Stepper Motor
E. IR Sensor Module
IR sensor is a very popular sensor, which is used in
many applications in electronics like it is used in
Remote control system, Motion detector, Product
counter, Line follower Robots, Alarms etc. Infrared
Obstacle Sensor Module has a built-in IR transmitter
and IR receiver that sends out IR energy and looks
for reflected IR energy to detect the presence of any
obstacle in front of the sensor module. The module
has an onboard potentiometer that lets the user
adjust detection range. The sensor has a very good
and stable response even in ambient light or in
complete darkness.
The Obstacle Avoidance Sensors usually come in
two types - with 3 and 4 pins. The 3 pin version does
not have the ability to be enabled/ disabled. The 4
pin version has optional Enable pin.
Figure.7 IR Sensor
F. 20X4 LCD Display
A Liquid Crystal Display (LCD) is an electronic
device that can be used to show numbers or text.
There are two main types of LCD display, numeric
4. International Journal of Trend in Scientific Research and Development (IJTSRD) @ www.ijtsrd.com eISSN: 2456-6470
@ IJTSRD | Unique Paper ID – IJTSRD26512 | Volume – 3 | Issue – 5 | July - August 2019 Page 909
displays (used in watches, calculators etc.) and
alphanumeric text displays. The LCD screen is an
electronic display module and finds a wide range of
applications. An LCD display modules are preferred
over seven segments and other multi segment LEDs.
The reasons being: LCDs are economical; easily
programmable; have no limitation of displaying
special & even custom characters (unlike in seven
segments), animations and so on.
A 20x4 LCD means it can display 20 characters per
line and there are 4 such lines. In this LCD each
character is displayed in the 5x7 pixel matrix. This
LCD has two registers, namely, Command and Data.
The command register stores the command
instructions given to the LCD. A command is an
instruction given to LCD to do a predefined task like
initializing it, clearing its screen, setting the cursor
position, controlling display etc. The data register
stores the data to be displayed on the LCD. The data
is the ASCII value of the character to be displayed on
the LCD. The HD44780 is a common LCD controller
and is very widespread through various formats, 1 x
8, 2 x 16, 2 x 20, 4 x 20 and others. This example
uses the very popular 4x20 format (4lines of 20
characters) which is now offered at a very
reasonable price. Other LCD display modules based
on compatible ST7066 or KS0066U controllers
could also be used.
The low power supply (2.7V to 5.5V) of the
HD44780U is suitable for any portable battery-
driven product requiring low power dissipation. A
single HD44780U can display up to one 8-character
line or two 8-character lines.
Figure 8. .HD44780 LCD Display Module
G. 4x4 Matrix Keypad
Matrix keypads use a combination of four rows and
four columns to provide button states to the host
device, typically a microcontroller. Underneath each
key is a pushbutton, with one end connected to one
row, and the other end connected to one column.
These connections are shown in Figure.
Figure 9. 4x4 Matrix Keypad
IV. TESTS AND RESULTS
The system has been implemented step-by-step and
in each step, experimental testing has been made to
make sure that there is no error. Moreover, the
important thing is to get the expected results. Tests
and results of the main steps involved in
implementing the system are described as follows.
Firstly, PIC microcontroller is connected with the
LCD step by step using wires. The pin
numbers(4,5,6,11,12,13 and 14) of LCD are
connected with the pin numbers (34,35,33,37,38,39
and 40) of PIC microcontroller in serial respectively.
Testing and result of the interfacing PIC
microcontroller and LCD are shown in Figure.
Figure 10. Testing and Result of Interfacing PIC
Microcontroller with LCD Display
Secondly, PIC microcontroller is connected with 4x4
keypad step by step using wires. The pin numbers
(1,2,3,4,5,6,7 and 8) of 4x4 keypad are connected
with pin numbers (19,20,21,22,27,28,29 and 30) of
PIC microcontroller in serial respectively.
Figure 11. Test and Result of Interfacing 4x4
Matrix Keypad, LCD Display and PIC
After that, PIC microcontroller is connected with
RDM6300 RFID module step by step using wires.
The pin numbers (RX and TX) of RDM6300 RFID
module are connected with pin numbers (25 and
26) of PIC microcontroller in serial respectively.
5. International Journal of Trend in Scientific Research and Development (IJTSRD) @ www.ijtsrd.com eISSN: 2456-6470
@ IJTSRD | Unique Paper ID – IJTSRD26512 | Volume – 3 | Issue – 5 | July - August 2019 Page 910
Figure 12. Test and Result of Interfacing RFID Reader
Module with PIC Microcontroller
Finally, stepper motor, stepper motor driver and PIC
microcontroller are tested as shown in Figure 13.
Figure 13. Test and Result of Interfacing Stepper Motor
with PIC Microcontroller
Figure 14. Final Assembly of RFID Based Parking Lot
Security System
V. CONCLUSION
A secure and well-managed parking lot system has been
successfully implemented by using RFID technology and
embedded technology. This system is ideal for apartments
and condos, gated communities, business parking lots,
garages and university parking area. It offers the users
convenience, safety and reliability. The point that only
authorized users can access the system to make the system
more secure and reliable. Moreover, the unauthorized user
will be denied and the alarm will be activated automatically.
By using the proposed system, personnel cost can be cut of
and traffic jam problems can be solved to some extent by
faster check-ins and check-outs.
VI. FURTHER EXTENSION
For stronger security, the system can be integrated with the
videosurveillance system. In order toincreasethenumberof
slots and its capacity, high-end PIC microcontroller like
18FXXXX series can beused.InsteadofusingIRsensors,RFID
read and write card can be substituted for high security. By
expanding this system we can also use this system to collect
revenue for the parking in an efficient manner.
Acknowledgment
The author would like to express her sincere gratitude and
deep appreciation to Dr. Theingi, Rector, Technological
University (Thanlyin), because of her valuable suggestions
and guidance. The author also thanks my colleagues in the
Department of Electronic Engineering, Technological
University (Lashio) for their help during developing this
system.
Reference
[1] Moscow Metro Tries RFID-Enabled Ticketing, RFID
Journal,2February2007,http://www.rfidjournal.com/
article/view/ 3049/
[2] Hoboken RFID-enables Its Parking Permits, RFID
Journal, June 2006, http://www.rfidjournal.com/
article/article view/2421/1/1/
[3] RFID Takes a Swing at Ticket Fraud, RFID Journal,
December 2005, http://www.rfidjournal.com/
article/article view/2060/1/1/
[4] Ligo George, 7 December 2014,
https://electrosome.com/interfacing-lcd-with-pic-
microcontroller-hi-tech-c/
[5] Ebin George, 17 May 2013, https://electrosome.com/
stepper-motor-pic-microcontroller/
[6] Neil Mathews, 4 February 2015,
https://supplychaindigital.com/
[7] Jordan, 20 Novenber 2017,
http://www.ripublication.com/
[8] Ba, M .T, 2006.Introduction Inductor, Transformer,
Rectifier and Voltage Regulation.
