The document provides instructions for installing RAM and a wireless network interface card (NIC) in a computer tower. It advises checking the existing RAM amount before installation. When opening the tower, take anti-static precautions and carefully locate slots to insert the new RAM and place the wireless NIC. After closing up, check that the NIC is functioning and that the RAM amount increased as expected. It also provides brief directions for connecting to a wireless network by selecting the network name and entering the chosen password.

1. By Harbinjit Salh

2. Before instillation go
and see how much
ram you have.

3. Before opening the tower unplug it
from the main and where a Anti-static
wrist strap so you don’t get shocked.
First you open the tower carefully.
Safely locate the place wear to put the
ram and carefully put it in and close
the holders to keep the ram still.

4. Place the wireless NIC on the back of
the tower, and once everything is
secured close the tower and plug it
back to the main.
Once connected turn on the computer
and this screen will appear, and click
F1 to continue.
Then check back at the wireless NIC
to see if it’s working and you’ll know
it’s working if the light is green.

5. Go back to system
properties to see if
the RAM size has
increased.

6. Then install the
wireless NIC.

7. Change network
name, so you could
find it easier.
Also choose a
password to
connect to the
network.

8. Locate the network
and connect. If the
network does not
appear click the
refresh button until
it appears.
After clicking the
network enter the
chosen password to
connect to it.