Z-Wave makes your home smarter. The Aeotec Doorbell 6 also makes your entrance area smarter.
By combining visual (1000lm) and audible (110dB) alarms, you'll be notified when someone is at your door. You can also connect the Aeotec Doorbell 6 to automated scenes
1. The document provides instructions for setting up and using an Aeotec Water Sensor 6 device to detect water leaks in the home.
2. It can detect water at 4 sensing points and notifies the user through an alarm if water is detected, while also shutting off the home's main water valve.
3. Setup involves powering on the sensor, adding it to the Z-Wave network, selecting a location for it, and configuring notifications through a smart home controller app.
1. The Aeotec Door Window Sensor is a Z-Wave device that can detect when doors and windows are opened or closed and supports firmware updates.
2. It has a main sensor unit and magnet that must be installed within 1.6cm or 2.5cm of each other, with the sensor on the door or window and magnet on the frame.
3. The sensor uses wireless technology to communicate with the Z-Wave network once paired with a Z-Wave controller and can detect openings up to 150 meters away.
The document provides instructions for setting up and using the Aeotec Door/Window Sensor 7. It includes details on package contents, installation steps like mounting the sensor and magnet, adding it to a Z-Wave network, and configuring functions like open/close detection, tilt detection, and using it as a dry contact sensor or scene controller. Advanced functions and troubleshooting steps are also covered.
The document provides instructions for installing and operating an IM20-ZWAVE magnetic contact sensor. The sensor detects when a door or window is opened and closed, and sends alarm signals via Z-wave. It supports wireless networking and battery monitoring. The summary provides installation instructions, specifications, operating modes, sensor reports, and configuration settings for things like light turn-off time and sensor report frequency.
El detector de apertura Aeotec de Aeon Labs de Gen5 proporciona a su red Z-Wave toda la inteligencia requerida por un sistema de domótica y alarmas moderna
This document provides instructions for a wireless Z-Wave siren. The siren warns of alarms with a loud sound and flashing light. It can be configured to use sound, light, or both. The siren includes a tamper switch and backup battery, and connects to a Z-Wave network by inclusion initiated by a primary controller. The document describes installing the siren, operating modes, configuration parameters for settings like alarm duration, and technical specifications.
Sensative Door Window Sensor Strip Z-Wave Plus User ManualDomotica daVinci
Strips is a Z-Wave magnet sensor that can be installed invisibly in windows and doors to detect their opening and closing. It communicates with a Z-Wave controller to monitor the home remotely. The document provides instructions on adding Strips to a Z-Wave network, planning its placement, mounting it correctly for optimal functionality and range, and includes details on its LED signals and configuration parameters.
StellaZ is a wireless thermostat valve control that can operate in four modes to control temperature. It includes with Z-Wave controllers and can be installed on radiator valves using adapters. The device wakes up periodically to report temperature and can be controlled remotely via Z-Wave to adjust temperature setpoints or directly control the valve opening percentage.
1. The document provides instructions for setting up and using an Aeotec Water Sensor 6 device to detect water leaks in the home.
2. It can detect water at 4 sensing points and notifies the user through an alarm if water is detected, while also shutting off the home's main water valve.
3. Setup involves powering on the sensor, adding it to the Z-Wave network, selecting a location for it, and configuring notifications through a smart home controller app.
1. The Aeotec Door Window Sensor is a Z-Wave device that can detect when doors and windows are opened or closed and supports firmware updates.
2. It has a main sensor unit and magnet that must be installed within 1.6cm or 2.5cm of each other, with the sensor on the door or window and magnet on the frame.
3. The sensor uses wireless technology to communicate with the Z-Wave network once paired with a Z-Wave controller and can detect openings up to 150 meters away.
The document provides instructions for setting up and using the Aeotec Door/Window Sensor 7. It includes details on package contents, installation steps like mounting the sensor and magnet, adding it to a Z-Wave network, and configuring functions like open/close detection, tilt detection, and using it as a dry contact sensor or scene controller. Advanced functions and troubleshooting steps are also covered.
The document provides instructions for installing and operating an IM20-ZWAVE magnetic contact sensor. The sensor detects when a door or window is opened and closed, and sends alarm signals via Z-wave. It supports wireless networking and battery monitoring. The summary provides installation instructions, specifications, operating modes, sensor reports, and configuration settings for things like light turn-off time and sensor report frequency.
El detector de apertura Aeotec de Aeon Labs de Gen5 proporciona a su red Z-Wave toda la inteligencia requerida por un sistema de domótica y alarmas moderna
This document provides instructions for a wireless Z-Wave siren. The siren warns of alarms with a loud sound and flashing light. It can be configured to use sound, light, or both. The siren includes a tamper switch and backup battery, and connects to a Z-Wave network by inclusion initiated by a primary controller. The document describes installing the siren, operating modes, configuration parameters for settings like alarm duration, and technical specifications.
Sensative Door Window Sensor Strip Z-Wave Plus User ManualDomotica daVinci
Strips is a Z-Wave magnet sensor that can be installed invisibly in windows and doors to detect their opening and closing. It communicates with a Z-Wave controller to monitor the home remotely. The document provides instructions on adding Strips to a Z-Wave network, planning its placement, mounting it correctly for optimal functionality and range, and includes details on its LED signals and configuration parameters.
StellaZ is a wireless thermostat valve control that can operate in four modes to control temperature. It includes with Z-Wave controllers and can be installed on radiator valves using adapters. The device wakes up periodically to report temperature and can be controlled remotely via Z-Wave to adjust temperature setpoints or directly control the valve opening percentage.
The document provides instructions for setting up and using the Aeotec by Aeon Labs Siren Gen5 home security device. It describes the device's features like its 105dB speaker, action button, and LED lights. It explains how to add the siren to a Z-Wave network using an Aeotec Z-Stick or Minimote controller and test the speaker. It also provides directions for removing the siren from the network or resetting it to factory defaults.
1. The document provides instructions for choosing a mounting location and installing a motion detector that is part of a Z-Wave enabled wireless network. It should be mounted 2 meters high in a corner to detect movement within 6-12 meters, avoiding direct sunlight or heat sources.
2. The motion detector is added to the Z-Wave network by putting the wireless controller into inclusion mode and pressing the tamper switch on the detector. It detects movement through changes in infrared radiation and triggers connected devices when motion is detected.
3. It has a time-off knob to set how long connected devices stay on after detection from 5 seconds to 12 minutes. Pressing the tamper switch for over 5 seconds triggers an
The SP816 is an outdoor motion detector that uses a PIR sensor to detect movement and a light sensor to detect ambient light levels. It can communicate with other Z-Wave devices to control lighting. It has adjustable timers to control how long lights stay on after detecting motion. The motion detector can be included into a Z-Wave network to communicate with a controller and other devices.
Manual Smart combustible gas sensor Z-Wave Plus -ZipatoDomotica daVinci
This document provides installation and operation instructions for a smart combustible gas sensor. It can be installed 0.3-1m from the floor or ceiling, within 1.5m of a gas source. The sensor has a 5 year lifespan and uses Z-Wave wireless technology. To install it, the device must pre-heat for 3 minutes before inclusion into a Z-Wave network. It detects gas leaks and sends notifications. The sensor works between -10°C and 50°C and has a wireless range of under 100m.
Manual Outdoor motion detector Z-Wave Plus - PhilioDomotica daVinci
The motion sensor uses Z-Wave wireless technology to detect motion. It can be included in a Z-Wave network to remotely control devices. The sensor detects motion using a PIR sensor and supports two operation modes. It can associate with other devices and report events wirelessly. The device settings can be configured including sensitivity, detection interval, and auto reporting frequency.
Ph pat02 - zipato flood multisensor 3 in 1 user manual v1.0Domotica daVinci
This document provides a summary of a quick installation guide for a Zipato Flood Multisensor 3 in 1 device. It includes sections on trademarks, notices, electromagnetic compatibility, safety, introduction, mounting, power up procedure, adding to a Z-Wave network, configuration settings, and specifications. The guide provides instructions on installing, setting up, and integrating the flood, temperature, and humidity sensor device into a Z-Wave home automation network.
The motion detector is a Z-Wave enabled security and home automation device. It detects movement using PIR and light sensors. When movement is detected, it sends radio signals to trigger alarms or turn on connected lights. It can be included in a Z-Wave network and associated with other devices. Settings include sensitivity level, re-trigger interval, sensor function enabling, lux level detection threshold, and grouping for device control. The battery typically lasts over 1 year and a low battery is indicated by the LED flashing every 30 seconds.
Evespring ST812 Z-Wave flood sendor manual in EnglishDomotica daVinci
The Flood Detector is a Z-Wave enabled device that is compatible with any Z-Wave network. It uses a tamper switch to be included in a network and supports associations with up to five other nodes. When triggered, it will flash an LED, beep, and transmit signals to associated nodes. It uses three AA batteries and has a low battery indication of flashing its red LED every 30 seconds.
Manual Opening Detector with temeperature sensor Z-Wave Plus Version 2- FibaroDomotica daVinci
FIBARO Door/Window Sensor 2 is a fully compatible Z-Wave PLUS device that detects the opening of doors, windows, and other openings through the separation of the sensor body and a magnet. It has built-in temperature sensing and tamper detection. The device can be installed on doors, windows, and more using adhesive strips and has LED indicators and buttons to control and reset the device.
The document provides instructions for installing and operating a WiDom Smart Plug. The Smart Plug can be included in a Z-Wave network, detects overvoltage and overcurrent events, and controls associated devices. It has technical specifications including voltage and current thresholds for alarms. The instructions describe configuration parameters for controlling the plug and associated devices during alarm events.
The Orvibo Allone lets you control your IR controllable devices (such as TV, DVD player, air conditioner, ...) from your smartphone, wherever you are on WiFi or 4G networks. Your smartphone will become a universal IR remote.
This document provides information about Zipato trademarks, product names, notices, electromagnetic compatibility, safety precautions, features, specifications, and installation of Zipato products. It notes that Zipato and the Zipato logo are registered trademarks, discusses limitations of liability and warranty coverage, and provides installation instructions and specifications for Zipato devices. Safety warnings are provided for working with electricity and using power tools for installation.
This document summarizes the features and specifications of the Slim Multi-Sensor PSP01, a Z-Wave enabled motion, temperature, and light sensor. It has PIR, temperature and light sensors integrated into one device. It can be included into a Z-Wave home automation network to detect motion and changes in temperature or light levels and send notifications to other devices. It supports various configuration settings to customize its operation and reporting.
Eurotronic Spirit Radiator Thermostat Head Z-Wave Plus ManualDomotica daVinci
1. The document provides instructions for installing and operating the Spirit Z-Wave Plus energy-saving thermostat.
2. It describes including the thermostat in a Z-Wave network by putting the primary controller into inclusion mode and pressing the thermostat's boost button.
3. The thermostat can be mounted on radiator valves with integrated or additional adapters and includes buttons for temperature adjustment, modes, and a display for feedback.
The document provides installation instructions for a Smart Smoke Sensor in 3 sentences:
The smoke sensor should be installed in the center of the ceiling at least 30cm from lights and 15cm from walls. It can be mounted on sloping ceilings up to 90cm from the top of the ceiling. The installation steps include rotating the bracket out of the base, removing the battery strip to power on the sensor, and fitting the sensor into the bracket.
The document provides information about a Z-Wave glass surface 2 channel touch panel switch, including:
1) It can switch two separate loads up to 1100W and is designed for UK pattress boxes.
2) It uses Z-Wave wireless communication at 868.42MHz to control associated devices or scenes.
3) It must be included in a Z-Wave network by a primary controller to communicate with other devices.
The Scene Controller is a Z-Wave device that can activate up to 14 scenes with 7 buttons. It operates using 2 AAA batteries, has a wireless range of up to 30 meters, and sends notifications to associated devices when buttons are pressed to trigger scenes. Scenes 1-7 are activated by single presses while scenes 8-14 are activated by double presses within 0.2 seconds.
The document provides instructions for setting up and using the Aeotec by Aeon Labs Heavy Duty Smart Switch Gen5. It includes steps for mounting the switch, wiring it, adding it to a Z-Wave network using a Z-Stick or Minimote controller, controlling it remotely once set up, and monitoring its energy usage. The switch can control high-powered appliances of up to 40 amps wirelessly.
Understand how much elctricity you are spending. In real time and with 99% accuracy, Smart Switch 7 will analyse appliances electricity consumption helping you save what you spend.
Zipato zd2102 door and window sensor manual englishDomotica daVinci
This document provides instructions and specifications for a Zipato door/window sensor product. It includes sections on trademarks, notices, electromagnetic compatibility, safety instructions, an introduction to the product, installation instructions, operation details, technical support information, specifications, and the manufacturer's declaration of conformity. The summary is:
1. The document is an instruction manual for a Zipato door/window sensor that monitors openings and closings of doors and windows and sends Z-Wave signals.
2. It provides detailed instructions on installing, operating, and maintaining the sensor including inserting batteries, adding it to a Z-Wave network, and fixing the magnet and sensor components.
3. The sensor specifications include operating temperature range,
This document provides instructions for setting up and operating a Zipato indoor siren device. It includes directions on powering on the device, adding it to a Z-Wave network, updating its firmware over-the-air, and configuring its alarm sounds and notifications. The document also provides specifications for the device, including its operating temperature range, dimensions, weight, supported Z-Wave command classes, and frequency versions for different regions.
The document provides instructions for installing and operating the Luxy Smart Light Z-Wave device. It can be controlled remotely via smartphone or automatically based on pre-programmed scenes. The summary includes instructions to reset the device to factory default settings for inclusion in a Z-Wave network, and that the light can be used standalone or with a smart home system for ambient lighting, notifications, or as part of alarm functions.
The document provides instructions for setting up and using the Aeotec by Aeon Labs Siren Gen5 home security device. It describes the device's features like its 105dB speaker, action button, and LED lights. It explains how to add the siren to a Z-Wave network using an Aeotec Z-Stick or Minimote controller and test the speaker. It also provides directions for removing the siren from the network or resetting it to factory defaults.
1. The document provides instructions for choosing a mounting location and installing a motion detector that is part of a Z-Wave enabled wireless network. It should be mounted 2 meters high in a corner to detect movement within 6-12 meters, avoiding direct sunlight or heat sources.
2. The motion detector is added to the Z-Wave network by putting the wireless controller into inclusion mode and pressing the tamper switch on the detector. It detects movement through changes in infrared radiation and triggers connected devices when motion is detected.
3. It has a time-off knob to set how long connected devices stay on after detection from 5 seconds to 12 minutes. Pressing the tamper switch for over 5 seconds triggers an
The SP816 is an outdoor motion detector that uses a PIR sensor to detect movement and a light sensor to detect ambient light levels. It can communicate with other Z-Wave devices to control lighting. It has adjustable timers to control how long lights stay on after detecting motion. The motion detector can be included into a Z-Wave network to communicate with a controller and other devices.
Manual Smart combustible gas sensor Z-Wave Plus -ZipatoDomotica daVinci
This document provides installation and operation instructions for a smart combustible gas sensor. It can be installed 0.3-1m from the floor or ceiling, within 1.5m of a gas source. The sensor has a 5 year lifespan and uses Z-Wave wireless technology. To install it, the device must pre-heat for 3 minutes before inclusion into a Z-Wave network. It detects gas leaks and sends notifications. The sensor works between -10°C and 50°C and has a wireless range of under 100m.
Manual Outdoor motion detector Z-Wave Plus - PhilioDomotica daVinci
The motion sensor uses Z-Wave wireless technology to detect motion. It can be included in a Z-Wave network to remotely control devices. The sensor detects motion using a PIR sensor and supports two operation modes. It can associate with other devices and report events wirelessly. The device settings can be configured including sensitivity, detection interval, and auto reporting frequency.
Ph pat02 - zipato flood multisensor 3 in 1 user manual v1.0Domotica daVinci
This document provides a summary of a quick installation guide for a Zipato Flood Multisensor 3 in 1 device. It includes sections on trademarks, notices, electromagnetic compatibility, safety, introduction, mounting, power up procedure, adding to a Z-Wave network, configuration settings, and specifications. The guide provides instructions on installing, setting up, and integrating the flood, temperature, and humidity sensor device into a Z-Wave home automation network.
The motion detector is a Z-Wave enabled security and home automation device. It detects movement using PIR and light sensors. When movement is detected, it sends radio signals to trigger alarms or turn on connected lights. It can be included in a Z-Wave network and associated with other devices. Settings include sensitivity level, re-trigger interval, sensor function enabling, lux level detection threshold, and grouping for device control. The battery typically lasts over 1 year and a low battery is indicated by the LED flashing every 30 seconds.
Evespring ST812 Z-Wave flood sendor manual in EnglishDomotica daVinci
The Flood Detector is a Z-Wave enabled device that is compatible with any Z-Wave network. It uses a tamper switch to be included in a network and supports associations with up to five other nodes. When triggered, it will flash an LED, beep, and transmit signals to associated nodes. It uses three AA batteries and has a low battery indication of flashing its red LED every 30 seconds.
Manual Opening Detector with temeperature sensor Z-Wave Plus Version 2- FibaroDomotica daVinci
FIBARO Door/Window Sensor 2 is a fully compatible Z-Wave PLUS device that detects the opening of doors, windows, and other openings through the separation of the sensor body and a magnet. It has built-in temperature sensing and tamper detection. The device can be installed on doors, windows, and more using adhesive strips and has LED indicators and buttons to control and reset the device.
The document provides instructions for installing and operating a WiDom Smart Plug. The Smart Plug can be included in a Z-Wave network, detects overvoltage and overcurrent events, and controls associated devices. It has technical specifications including voltage and current thresholds for alarms. The instructions describe configuration parameters for controlling the plug and associated devices during alarm events.
The Orvibo Allone lets you control your IR controllable devices (such as TV, DVD player, air conditioner, ...) from your smartphone, wherever you are on WiFi or 4G networks. Your smartphone will become a universal IR remote.
This document provides information about Zipato trademarks, product names, notices, electromagnetic compatibility, safety precautions, features, specifications, and installation of Zipato products. It notes that Zipato and the Zipato logo are registered trademarks, discusses limitations of liability and warranty coverage, and provides installation instructions and specifications for Zipato devices. Safety warnings are provided for working with electricity and using power tools for installation.
This document summarizes the features and specifications of the Slim Multi-Sensor PSP01, a Z-Wave enabled motion, temperature, and light sensor. It has PIR, temperature and light sensors integrated into one device. It can be included into a Z-Wave home automation network to detect motion and changes in temperature or light levels and send notifications to other devices. It supports various configuration settings to customize its operation and reporting.
Eurotronic Spirit Radiator Thermostat Head Z-Wave Plus ManualDomotica daVinci
1. The document provides instructions for installing and operating the Spirit Z-Wave Plus energy-saving thermostat.
2. It describes including the thermostat in a Z-Wave network by putting the primary controller into inclusion mode and pressing the thermostat's boost button.
3. The thermostat can be mounted on radiator valves with integrated or additional adapters and includes buttons for temperature adjustment, modes, and a display for feedback.
The document provides installation instructions for a Smart Smoke Sensor in 3 sentences:
The smoke sensor should be installed in the center of the ceiling at least 30cm from lights and 15cm from walls. It can be mounted on sloping ceilings up to 90cm from the top of the ceiling. The installation steps include rotating the bracket out of the base, removing the battery strip to power on the sensor, and fitting the sensor into the bracket.
The document provides information about a Z-Wave glass surface 2 channel touch panel switch, including:
1) It can switch two separate loads up to 1100W and is designed for UK pattress boxes.
2) It uses Z-Wave wireless communication at 868.42MHz to control associated devices or scenes.
3) It must be included in a Z-Wave network by a primary controller to communicate with other devices.
The Scene Controller is a Z-Wave device that can activate up to 14 scenes with 7 buttons. It operates using 2 AAA batteries, has a wireless range of up to 30 meters, and sends notifications to associated devices when buttons are pressed to trigger scenes. Scenes 1-7 are activated by single presses while scenes 8-14 are activated by double presses within 0.2 seconds.
The document provides instructions for setting up and using the Aeotec by Aeon Labs Heavy Duty Smart Switch Gen5. It includes steps for mounting the switch, wiring it, adding it to a Z-Wave network using a Z-Stick or Minimote controller, controlling it remotely once set up, and monitoring its energy usage. The switch can control high-powered appliances of up to 40 amps wirelessly.
Understand how much elctricity you are spending. In real time and with 99% accuracy, Smart Switch 7 will analyse appliances electricity consumption helping you save what you spend.
Zipato zd2102 door and window sensor manual englishDomotica daVinci
This document provides instructions and specifications for a Zipato door/window sensor product. It includes sections on trademarks, notices, electromagnetic compatibility, safety instructions, an introduction to the product, installation instructions, operation details, technical support information, specifications, and the manufacturer's declaration of conformity. The summary is:
1. The document is an instruction manual for a Zipato door/window sensor that monitors openings and closings of doors and windows and sends Z-Wave signals.
2. It provides detailed instructions on installing, operating, and maintaining the sensor including inserting batteries, adding it to a Z-Wave network, and fixing the magnet and sensor components.
3. The sensor specifications include operating temperature range,
This document provides instructions for setting up and operating a Zipato indoor siren device. It includes directions on powering on the device, adding it to a Z-Wave network, updating its firmware over-the-air, and configuring its alarm sounds and notifications. The document also provides specifications for the device, including its operating temperature range, dimensions, weight, supported Z-Wave command classes, and frequency versions for different regions.
The document provides instructions for installing and operating the Luxy Smart Light Z-Wave device. It can be controlled remotely via smartphone or automatically based on pre-programmed scenes. The summary includes instructions to reset the device to factory default settings for inclusion in a Z-Wave network, and that the light can be used standalone or with a smart home system for ambient lighting, notifications, or as part of alarm functions.
1) The document provides instructions for setting up and using the NEO CoolCam Siren Alarm device within a Z-Wave network.
2) It describes including the siren alarm in a Z-Wave network by triple clicking the code button, and configuring the siren alarm settings through the Z-Wave controller.
3) The siren alarm can be used to trigger alarms and doorbell sounds through the Z-Wave network when it receives messages from associated devices.
This document provides instructions and specifications for a Z-Wave door sensor. The sensor uses a CR2 battery and can be included in a Z-Wave network by pressing the button three times within 1.5 seconds. The sensor detects when a door is opened or closed and supports notification reports to associated devices. It has a battery life of approximately one year.
This document provides information about the MCO Home Glass Touch Switch GEN5 (1 Button) Z-Wave actuator. It can be used to control electrical loads and integrated into a Z-Wave home automation network to be controlled remotely. The switch has a touch button and LED for local control and supports inclusion in Z-Wave scenes. It also includes details on installation, configuration parameters, technical specifications, and explanations of related Z-Wave terms.
Manual sensor temperature and humidity z-wave plus - philioDomotica daVinci
This document provides instructions for a temperature and humidity sensor that uses Z-Wave technology to communicate wirelessly. It describes how to install batteries, include the device in a Z-Wave network, and configure settings like temperature units and sensor reporting intervals. The device can detect and report changes in temperature and humidity based on configured thresholds.
This document provides information about a 10 year smoke detector and siren device that includes Z-Wave connectivity. It can detect smoke and wirelessly report an alarm, includes a replaceable battery, and can be included in a Z-Wave network to control other devices. The document outlines how to install, operate, and configure the device including resetting it and including/excluding it from the Z-Wave network.
This document provides product information for a 10 year smoke detector and siren with Z-Wave connectivity. It can detect smoke and wirelessly report alarms while also functioning as a controllable indoor siren. The detector uses a long-life battery while the Z-Wave module uses a replaceable battery. It can be included in a Z-Wave network to communicate with other devices and can trigger automated responses through associations. The document provides details on installation, operation, configuration parameters, and troubleshooting.
This document provides instructions for using a Zipato Z-Wave Remote control. It summarizes that the remote can control AV devices through a Z-Wave to IR extender and control 8 lighting groups. It provides details on inclusion, exclusion, resetting, and association procedures. It also specifies the remote's technical specifications, features, and overview.
This smart color button device is a multifunction switch that can control appliances and dimmers. It has a magnetic back and wall bracket for mounting. It can switch devices on/off, adjust dimming levels, and operate as a timer. The device uses Z-Wave to connect to other devices and supports features like auto-reporting, association groups, and configuration settings.
This document provides instructions for a portable Z-Wave wall controller. It can be included in a Z-Wave network to control other devices and act as a primary controller. The controller has buttons for inclusion, exclusion, association and wakeup functions. It runs on two AAAA batteries and can be mounted on walls using screws or adhesive.
1) This document provides instructions for setting up and using a Hank motion sensor that uses Z-Wave technology for wireless communication.
2) It describes how to include the sensor in a Z-Wave network by putting the controller in add mode and pressing the sensor's Z-button, and explains the sensor's motion detection range and parameters that can be configured like sensitivity.
3) The technical specifications are also summarized, including the sensor's dimensions, battery type, supported command classes, and certifications.
This document provides information about a Popp water leakage sensor that uses Z-Wave technology to detect water and send alarm messages. It can be installed using adhesive tape or screws. To add it to a Z-Wave network, click the internal button once during inclusion mode. The sensor will then alert to water detection by blinking its LED and optional buzzer. It operates on a battery and communicates through a static controller when asleep.
3 in 1 multi sensor Philio PSM01 (door, window, temperature, lightness) manualDomotica daVinci
The slim multi-sensor PSM01 has three sensors - door/window, temperature, and illumination - in one device. It uses Z-Wave wireless technology to connect to a home automation network and controller. The device can detect door/window openings, temperature changes, and light levels, and report this information to the controller. It also has capabilities for controlling connected lights based on sensor readings and settings. The document provides detailed information on configuring, installing, and operating the multi-sensor device on a Z-Wave wireless home automation network.
1) This document provides instructions for setting up and using the Aeotec Radiator Thermostat Z-Wave device. It should be included in a Z-Wave network and uses 2 AA batteries.
2) The thermostat can be mounted on a radiator and used to control heating and adjust temperature setpoints. It features a boost mode, child lock, and window open detection.
3) The thermostat's parameters can be configured, including LCD settings, battery reporting, temperature reporting thresholds, and window open detection sensitivity. Proper inclusion and exclusion from a Z-Wave network is described.
FIBARO KeyFob is a fully compatible Z-Wave PLUS remote control device with 6 buttons. It can control other Z-Wave devices and activate scenes. The manual provides instructions on adding the device to a Z-Wave network, operating and configuring its buttons, checking battery level, and setting an optional lock mode with an unlock sequence. Advanced parameters allow customizing sequences and associations to other Z-Wave devices.
This device is a portable Z-Wave wall controller that can control other Z-Wave devices and act as a primary or secondary controller in a Z-Wave network. It includes devices by pressing the Include button for 2 seconds and issues node information frames with triple clicks of the Up/Down buttons. The controller runs on 2 AAA batteries and can be mounted on flat surfaces.
Z wave aeon_labs_door_window_sensor_6_gen5_manualDomotica daVinci
The document provides instructions for setting up and using the Aeotec by Aeon Labs Door Window Sensor. It describes how to add the sensor to a Z-Wave network, install the main sensor and magnet, configure the sensor settings, and remove it from the network. The sensor can be included as either a secure or non-secure Z-Wave device and has features like battery charging, firmware updates, and factory reset.
This document provides information about the Hank Flood Sensor device, including how to include it in a Z-Wave network, its configuration parameters, technical specifications, and explanations of Z-Wave terminology. The sensor can detect leaks and floods and sends alerts. It uses the international Z-Wave protocol for wireless communication between smart home devices.
The motion sensor uses Z-Wave wireless technology to detect motion. It can be included in a Z-Wave network to remotely control devices. The sensor detects motion using a PIR sensor and supports two operation modes. It can associate with other devices and report events wirelessly. The device settings can be configured including sensitivity, detection interval, and auto reporting frequency.
The 2CH Dimmer Module allows manual control of lights through a push switch and app control. It can control up to two lighting circuits and provides options for permanent on/off or dimming control through short or long button pushes. Installation requires turning off power and properly wiring the unit according to diagrams. The module can be reset through a long button press or external button presses and pairs with Zigbee gateways through a learning mode button hold.
Zi-Stick is a self-powered Zigbee 3.0 USB adapter that is used to control actuators and sensors in a Zigbee network. It connects to a computer via USB and appears as a virtual serial or COM port. The user guide provides instructions for installing any necessary drivers, identifying the Zi-Stick's COM port, and connecting it to software like Home Assistant or OpenHAB. Safety information is also included, noting that the Zi-Stick should be used indoors and away from heat or moisture.
This document provides installation and operation instructions for a BRT-100 radiator thermostat in French. It includes:
1. An introduction and welcome message thanking the customer for their purchase.
2. Technical characteristics and features of the thermostat such as LED display, color display, curved design, energy efficient battery that lasts 1 year.
3. Step-by-step instructions for installation including selecting the correct adapter, installing the mounting plate and battery, and connecting the thermostat.
Cherubini Meta Z-Wave Double Switch A510083-84-90Domotica daVinci
Este documento proporciona instrucciones para un actuador con dos salidas independientes de 230V. Incluye especificaciones técnicas, información de seguridad, diagramas de conexión e instrucciones de instalación, control y configuración. El dispositivo permite controlar dos cargas de forma independiente a través de radio o pulsador y puede integrarse en sistemas domóticos Z-Wave.
Este documento proporciona instrucciones para el uso de un enchufe inteligente. Describe las especificaciones técnicas del dispositivo, cómo incluirlo y excluirlo de una red Z-Wave, cómo controlarlo y leer sus parámetros eléctricos, y cómo configurar sus alarmas y asociaciones con otros dispositivos.
Quinto Z-Wave Heltun_HE-RS01_User_Manual_B9AH.pdfDomotica daVinci
The document provides instructions for installing and operating the HE-RS01 five-channel relay switch. Key details include:
- The HE-RS01 can control up to five on/off devices or combinations of on/off and two-direction motor devices.
- It has five configurable relay outputs, two independent inputs, and supports schedules, motor control, and association with other Z-Wave devices.
- Installation requires connecting power, load, and external switch wires per the provided diagrams and safely turning power back on at the circuit breaker.
- The HE-RS01 can be included in a Z-Wave network and each relay and external input is configurable for different control modes.
Z-Wave Fan coil Thermostat Heltun_HE-HT01_User_Manual.pdfDomotica daVinci
The document provides a user manual for the HE-HT01 thermostat. It has 6 operating modes including Comfort, Schedule, Floor Drying, Energy Saving, Vacation, and Manual. It can be installed flush in an electrical junction box and controls heating systems up to 16A. The thermostat integrates Z-Wave technology for smart home control and has touch buttons, LCD display, and sensors for temperature, humidity, and energy usage.
The document provides instructions for an energy-saving radiator thermostat that uses Z-Wave wireless technology. It includes details on installation, setup, operation, and technical specifications. The thermostat can be added to a Z-Wave network to communicate with other devices and be controlled remotely. It offers functions like setting target temperatures, child lock, operating modes, and displaying network information.
The motion sensor user guide provides specifications and setup instructions. It detects motion within 10 meters at a 120 degree angle using Zigbee wireless communication. To set up, download the Smart Life app, register an account, add the Zigbee controller, then search for and add the motion sensor, which can be configured for various alarm settings and linkages within the app.
The document provides a user guide for the Aeotec Range Extender 7, which is a Z-Wave signal amplifier developed to extend the range of a Z-Wave network. It describes how to include the Range Extender in a Z-Wave network using either SmartStart or classic inclusion. It also explains how to control the LED, test connectivity health, remove the device from the network, and manually reset the Range Extender.
The document provides specifications for a Z-Wave multi-sensor device. It includes details on the device's library and command classes, Z-Wave network operation including button functions and LED indicators, association groups and commands, wakeup settings, battery information, sensor readings for temperature, humidity, light and UV, notification types, manufacturer information, and configuration parameters.
Z-Stick 7 is a Z-Wave USB adapter that allows users to control Z-Wave devices and sensors. It uses Series700 and Gen7 technology with SmartStart and S2 security. The guide provides instructions on installing drivers, adding the Z-Stick to home automation software as a primary or secondary controller, using serial API mode, development tools, and resetting the Z-Stick. Compatible software setup guides are also listed.
Optimal protection for critical loads. To limit starting currents on problematic devices, such as energy saving bulbs and fluorescent bulbs. Problematic devices, such as electronic ballasts, energy-saving light bulbs, incandescent bulbs, LED drivers, and switching power supplies, consume a lot of power during ignition due to the multiplication of current. nominal and can therefore destroy the switching relay.
With the ESB200 current limiter, the high current that can occur when switching on electronic devices is limited to a harmless value. It is also possible to limit the inrush current of incandescent lamps to give them a longer life. A protection fuse is also integrated. This starting current limiter can be plugged directly into the power supply circuit for loads up to 200 VA. This compact device can be installed very easily in junction and recessed boxes or in lamp boxes, for example. The device is easily installed in series with the load
wiDom Smart Roller Shutter Z-Wave Plus Module ManualDomotica daVinci
The document provides instructions for installing and operating the WiDom Smart Roller Shutter, a Z-Wave enabled device for controlling roller shutters, blinds, and curtains. It can accurately control opening and closing positions through local or remote commands. After an initial calibration, it identifies the position without sensors. Safety information warns that installation requires qualified electricians and live voltages are present. Installation instructions explain connecting it according to the diagrams and including it in a Z-Wave network. The LED status indicator shows inclusion status and communication events.
Best 20 SEO Techniques To Improve Website Visibility In SERPPixlogix Infotech
Boost your website's visibility with proven SEO techniques! Our latest blog dives into essential strategies to enhance your online presence, increase traffic, and rank higher on search engines. From keyword optimization to quality content creation, learn how to make your site stand out in the crowded digital landscape. Discover actionable tips and expert insights to elevate your SEO game.
UiPath Test Automation using UiPath Test Suite series, part 5DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 5. In this session, we will cover CI/CD with devops.
Topics covered:
CI/CD with in UiPath
End-to-end overview of CI/CD pipeline with Azure devops
Speaker:
Lyndsey Byblow, Test Suite Sales Engineer @ UiPath, Inc.
AI 101: An Introduction to the Basics and Impact of Artificial IntelligenceIndexBug
Imagine a world where machines not only perform tasks but also learn, adapt, and make decisions. This is the promise of Artificial Intelligence (AI), a technology that's not just enhancing our lives but revolutionizing entire industries.
Essentials of Automations: The Art of Triggers and Actions in FMESafe Software
In this second installment of our Essentials of Automations webinar series, we’ll explore the landscape of triggers and actions, guiding you through the nuances of authoring and adapting workspaces for seamless automations. Gain an understanding of the full spectrum of triggers and actions available in FME, empowering you to enhance your workspaces for efficient automation.
We’ll kick things off by showcasing the most commonly used event-based triggers, introducing you to various automation workflows like manual triggers, schedules, directory watchers, and more. Plus, see how these elements play out in real scenarios.
Whether you’re tweaking your current setup or building from the ground up, this session will arm you with the tools and insights needed to transform your FME usage into a powerhouse of productivity. Join us to discover effective strategies that simplify complex processes, enhancing your productivity and transforming your data management practices with FME. Let’s turn complexity into clarity and make your workspaces work wonders!
Driving Business Innovation: Latest Generative AI Advancements & Success StorySafe Software
Are you ready to revolutionize how you handle data? Join us for a webinar where we’ll bring you up to speed with the latest advancements in Generative AI technology and discover how leveraging FME with tools from giants like Google Gemini, Amazon, and Microsoft OpenAI can supercharge your workflow efficiency.
During the hour, we’ll take you through:
Guest Speaker Segment with Hannah Barrington: Dive into the world of dynamic real estate marketing with Hannah, the Marketing Manager at Workspace Group. Hear firsthand how their team generates engaging descriptions for thousands of office units by integrating diverse data sources—from PDF floorplans to web pages—using FME transformers, like OpenAIVisionConnector and AnthropicVisionConnector. This use case will show you how GenAI can streamline content creation for marketing across the board.
Ollama Use Case: Learn how Scenario Specialist Dmitri Bagh has utilized Ollama within FME to input data, create custom models, and enhance security protocols. This segment will include demos to illustrate the full capabilities of FME in AI-driven processes.
Custom AI Models: Discover how to leverage FME to build personalized AI models using your data. Whether it’s populating a model with local data for added security or integrating public AI tools, find out how FME facilitates a versatile and secure approach to AI.
We’ll wrap up with a live Q&A session where you can engage with our experts on your specific use cases, and learn more about optimizing your data workflows with AI.
This webinar is ideal for professionals seeking to harness the power of AI within their data management systems while ensuring high levels of customization and security. Whether you're a novice or an expert, gain actionable insights and strategies to elevate your data processes. Join us to see how FME and AI can revolutionize how you work with data!
HCL Notes and Domino License Cost Reduction in the World of DLAUpanagenda
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
Full-RAG: A modern architecture for hyper-personalizationZilliz
Mike Del Balso, CEO & Co-Founder at Tecton, presents "Full RAG," a novel approach to AI recommendation systems, aiming to push beyond the limitations of traditional models through a deep integration of contextual insights and real-time data, leveraging the Retrieval-Augmented Generation architecture. This talk will outline Full RAG's potential to significantly enhance personalization, address engineering challenges such as data management and model training, and introduce data enrichment with reranking as a key solution. Attendees will gain crucial insights into the importance of hyperpersonalization in AI, the capabilities of Full RAG for advanced personalization, and strategies for managing complex data integrations for deploying cutting-edge AI solutions.
How to Get CNIC Information System with Paksim Ga.pptxdanishmna97
Pakdata Cf is a groundbreaking system designed to streamline and facilitate access to CNIC information. This innovative platform leverages advanced technology to provide users with efficient and secure access to their CNIC details.
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/building-and-scaling-ai-applications-with-the-nx-ai-manager-a-presentation-from-network-optix/
Robin van Emden, Senior Director of Data Science at Network Optix, presents the “Building and Scaling AI Applications with the Nx AI Manager,” tutorial at the May 2024 Embedded Vision Summit.
In this presentation, van Emden covers the basics of scaling edge AI solutions using the Nx tool kit. He emphasizes the process of developing AI models and deploying them globally. He also showcases the conversion of AI models and the creation of effective edge AI pipelines, with a focus on pre-processing, model conversion, selecting the appropriate inference engine for the target hardware and post-processing.
van Emden shows how Nx can simplify the developer’s life and facilitate a rapid transition from concept to production-ready applications.He provides valuable insights into developing scalable and efficient edge AI solutions, with a strong focus on practical implementation.
Programming Foundation Models with DSPy - Meetup SlidesZilliz
Prompting language models is hard, while programming language models is easy. In this talk, I will discuss the state-of-the-art framework DSPy for programming foundation models with its powerful optimizers and runtime constraint system.
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAUpanagenda
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-und-domino-lizenzkostenreduzierung-in-der-welt-von-dlau/
DLAU und die Lizenzen nach dem CCB- und CCX-Modell sind für viele in der HCL-Community seit letztem Jahr ein heißes Thema. Als Notes- oder Domino-Kunde haben Sie vielleicht mit unerwartet hohen Benutzerzahlen und Lizenzgebühren zu kämpfen. Sie fragen sich vielleicht, wie diese neue Art der Lizenzierung funktioniert und welchen Nutzen sie Ihnen bringt. Vor allem wollen Sie sicherlich Ihr Budget einhalten und Kosten sparen, wo immer möglich. Das verstehen wir und wir möchten Ihnen dabei helfen!
Wir erklären Ihnen, wie Sie häufige Konfigurationsprobleme lösen können, die dazu führen können, dass mehr Benutzer gezählt werden als nötig, und wie Sie überflüssige oder ungenutzte Konten identifizieren und entfernen können, um Geld zu sparen. Es gibt auch einige Ansätze, die zu unnötigen Ausgaben führen können, z. B. wenn ein Personendokument anstelle eines Mail-Ins für geteilte Mailboxen verwendet wird. Wir zeigen Ihnen solche Fälle und deren Lösungen. Und natürlich erklären wir Ihnen das neue Lizenzmodell.
Nehmen Sie an diesem Webinar teil, bei dem HCL-Ambassador Marc Thomas und Gastredner Franz Walder Ihnen diese neue Welt näherbringen. Es vermittelt Ihnen die Tools und das Know-how, um den Überblick zu bewahren. Sie werden in der Lage sein, Ihre Kosten durch eine optimierte Domino-Konfiguration zu reduzieren und auch in Zukunft gering zu halten.
Diese Themen werden behandelt
- Reduzierung der Lizenzkosten durch Auffinden und Beheben von Fehlkonfigurationen und überflüssigen Konten
- Wie funktionieren CCB- und CCX-Lizenzen wirklich?
- Verstehen des DLAU-Tools und wie man es am besten nutzt
- Tipps für häufige Problembereiche, wie z. B. Team-Postfächer, Funktions-/Testbenutzer usw.
- Praxisbeispiele und Best Practices zum sofortigen Umsetzen
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?Speck&Tech
ABSTRACT: A prima vista, un mattoncino Lego e la backdoor XZ potrebbero avere in comune il fatto di essere entrambi blocchi di costruzione, o dipendenze di progetti creativi e software. La realtà è che un mattoncino Lego e il caso della backdoor XZ hanno molto di più di tutto ciò in comune.
Partecipate alla presentazione per immergervi in una storia di interoperabilità, standard e formati aperti, per poi discutere del ruolo importante che i contributori hanno in una comunità open source sostenibile.
BIO: Sostenitrice del software libero e dei formati standard e aperti. È stata un membro attivo dei progetti Fedora e openSUSE e ha co-fondato l'Associazione LibreItalia dove è stata coinvolta in diversi eventi, migrazioni e formazione relativi a LibreOffice. In precedenza ha lavorato a migrazioni e corsi di formazione su LibreOffice per diverse amministrazioni pubbliche e privati. Da gennaio 2020 lavora in SUSE come Software Release Engineer per Uyuni e SUSE Manager e quando non segue la sua passione per i computer e per Geeko coltiva la sua curiosità per l'astronomia (da cui deriva il suo nickname deneb_alpha).
Sudheer Mechineni, Head of Application Frameworks, Standard Chartered Bank
Discover how Standard Chartered Bank harnessed the power of Neo4j to transform complex data access challenges into a dynamic, scalable graph database solution. This keynote will cover their journey from initial adoption to deploying a fully automated, enterprise-grade causal cluster, highlighting key strategies for modelling organisational changes and ensuring robust disaster recovery. Learn how these innovations have not only enhanced Standard Chartered Bank’s data infrastructure but also positioned them as pioneers in the banking sector’s adoption of graph technology.
TrustArc Webinar - 2024 Global Privacy SurveyTrustArc
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
1. Aeotec
Doorbell 6
SKU: AEOEZW162
Quickstart
This is a secure Sound Switch for Europe. To run this device please connect it to your mains power supply. 1. Set your Z-Wave Controller into its Add
Device mode in order to add Chime into your Z-Wave system. Refer to the Controllers manual if you are unsure of how to perform this step.
2. Power on Chime via the provided power adapter; its LED will be breathing white light all the time.
3. Click Chime Action Button once, it will quickly flash white light for 30 seconds until Chime is added into the network. It will become constantly bright white
light after being assigned a NodeID.
4. If your Z-Wave Controller supports S2 encryption, enter the first 5 digits of DSK into your Controllers interface if/when requested. The DSK is printed on
Chimes housing.
5. If Adding fails, it will slowly flash white light 3 times and then become breathing white light; repeat steps 1 to 4. Contact us for further support if needed.
6. If Adding succeeds, it will quickly flash white light 3 times and then become off. Now, Chime is a part of your Z-Wave home control system. You can
configure it and its automation via your Z-Wave system; please refer to your softwares user guide for precise instructions.
Note:If Action Button is clicked again during the Learn Mode, the Learn Mode will exit. At the same time, Indicator Light will extinguish immediately, and
then become breathing white light.
Important safety information
Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer,
distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this
equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.
What is Z-Wave?
Z-Wave is the international wireless protocol for communication in the Smart Home. This device is suited for use in the region mentioned in the Quickstart section.
Z-Wave ensures a reliable communication by reconfirming every message (two-way communication) and
every mains powered node can act as a repeater for other nodes (meshed network) in case the receiver is
not in direct wireless range of the transmitter.
This device and every other certified Z-Wave device can be used together with any other certified
Z-Wave device regardless of brand and origin as long as both are suited for the same frequency range.
If a device supports secure communication it will communicate with other devices secure as long as this
device provides the same or a higher level of security. Otherwise it will automatically turn into a lower level
of security to maintain backward compatibility.
For more information about Z-Wave technology, devices, white papers etc. please refer to www.z-wave.info.
Product Description
Siren 6 is an S2 safety device. They can be used not only as a Siren, but also as a Doorbell with one or more wireless buttons.
In addition, up to 30 different tones can be set in the Siren 6.
Prepare for Installation / Reset
Please read the user manual before installing the product.
In order to include (add) a Z-Wave device to a network it must be in factory default state. Please make sure to reset the device into factory default. You can do
this by performing an Exclusion operation as described below in the manual. Every Z-Wave controller is able to perform this operation however it is recommended
to use the primary controller of the previous network to make sure the very device is excluded properly from this network.
Reset to factory default
This device also allows to be reset without any involvement of a Z-Wave controller. This procedure should only be used when the primary controller is inoperable.
To complete the reset process manually, press and hold the Action Button for at least 20s. The LED indicator will quickly flash white light 3 times and then become
1 de 11
2. breathing white light, which indicates the reset operation is successful.
Safety Warning for Mains Powered Devices
ATTENTION: only authorized technicians under consideration of the country-specific installation guidelines/norms may do works with mains power. Prior to the
assembly of the product, the voltage network has to be switched off and ensured against re-switching.
Installation
Install Mounting plate in the location of your choice.
1. Affix Doorbell 6 Wall Mount Plate in any desired location near an outlet.
a. Use 3x 20mm screws or double-sided tape.
b. Lock the Doorbell 6 into place where the mount is installed.
How to install Button Avoid exposing Button to direct sunlight where possible to avoid UV damage and reduced battery performance.
1. Select an installation location for Button. Do not yet install it.
2. Power on Button. a. Remove the 2 screws from Buttons rear to open its battery cover and install the provided CR2450 battery with the positive (+) on top. b.
Replace the battery cover and the 2 screws.
3. Test the wireless connection by pressing Ring Button to trigger a doorbell alert. Select an alternative installation location for Chime if the connection is poor.
4. Install Button. a. Affix the mounting plate to the selected surface; affix it using either 2 × 20mm screws or double-sided tape. b. Lock your Button onto the mounting
plate.
Inclusion/Exclusion
On factory default the device does not belong to any Z-Wave network. The device needs to be added to an existing wireless network to communicate with the
devices of this network. This process is called Inclusion.
Devices can also be removed from a network. This process is called Exclusion. Both processes are initiated by the primary controller of the Z-Wave network. This
controller is turned into exclusion respective inclusion mode. Inclusion and Exclusion is then performed doing a special manual action right on the device.
Inclusion
1. Set your Z-Wave Controller into its Add Device mode in order to add Chime into your Z-Wave system.
2. Power on Chime via the provided power adapter; its LED will be breathing white light all the time.
3. Click Chime Action Button once, it will quickly flash white light for 30 seconds until Chime is added into the network. It will become constantly bright white light
after being assigned a NodeID.
4. If your Z-Wave Controller supports S2 encryption, enter the first 5 digits of DSK into your Controllers interface if/when requested. The DSK is printed on Chimes
housing.
5. If Adding fails, it will slowly flash white light 3 times and then become breathing white light; repeat steps 1 to 4. Contact us for further support if needed.
6. If Adding succeeds, it will quickly flash white light 3 times and then become off. Now, Chime is a part of your Z-Wave home control system. You can configure it
2 de 11
3. and its automations via your Z-Wave system; please refer to your softwares user guide for precise instructions.
Note: If Action Button is clicked again during the Learn Mode, the Learn Mode will exit. At the same time, Indicator Light will extinguish immediately, and then
become breathing white light.
Exclusion
1. Set your Z-Wave Controller into its Remove Device mode in order to remove Chime from your Z-Wave system.
2. Power on Chime via the provided power adapter; its LED will be off.
3. Click Chime Action Button 6 times quickly; it will bright white light, up to 2s.
4. If Removing fails, it will keep off; repeat steps 1 to 3. Contact us for further support if needed.
5. If Removing succeeds, it will quickly flash white light 3 times and then become breathing white light. Now, Chime is removed from Z-Wave network successfully.
Product Usage
How to pair Button
There are two way to trigger pairing Button:
- Manually quick click Chime Action Button. Can be done both in and out of the network.
- With Configuration Set. Can only be done in the network. Refer to Configuration Parameter 49/50/51 for details.
Below is mainly about manually quick click Chime Action Button to trigger pairing Button.
1. Different click times will trigger different Pairing Button Mode. Please action as shown below.
- Click Action Button 3 times quickly will trigger Pairing #1 Button Mode.
- Click Action Button 4 times quickly will trigger Pairing #2 Button Mode.
- Click Action Button 5 times quickly will trigger Pairing #3 Button Mode.
2. Observe Chime Indicator Light to make sure which Button is waiting for pairing.
- When Pairing #1 Button Mode is triggered, Chime Indicator Light will bright 1 time ON 0.5s OFF 1s, and then become constantly bright white light, indicating
that Pairing #1 Button Mode has already triggered. Pairing time is up to 10 seconds. In this time period, user MUST manually click Ring Button 3 times quickly.
Otherwise it cannot be paired successfully.
- When Pairing #2 Button Mode is triggered, Chime Indicator Light will bright 2 times ON 0.5s OFF 1s, and then become constantly bright white light, indicating
that Pairing #2 Button Mode has already triggered. Pairing time is up to 10 seconds. In this time period, user MUST manually click Ring Button 3 times quickly.
Otherwise it cannot be paired successfully.
- When Pairing #3 Button Mode is triggered, Chime Indicator Light will bright 3 times ON 0.5s OFF 1s, and then become constantly bright white light, indicating
that Pairing #3 Button Mode has already triggered. Pairing time is up to 10 seconds. In this time period, user MUST manually click Ring Button 3 times quickly.
Otherwise it cannot be paired successfully.
3. Determine pairing results.
- If pairing Button succeeds, Chime Indicator Light will quickly flash white light 3 times and play the corresponding tone of paired Button, and then become
breathing white light (when Chime is out of the Z-Wave network) or off (when Chime is in the Z-Wave network)
- If pairing Button fairs, Chime Indicator Light will slowly flash white light 3 times and then become breathing white light (when Chime is out of the Z-Wave
network) or off (when Chime is in the Z-Wave network).
Note:
- Only one Button can be paired at one time.
- Each successful pairing will overwrite the previous paired Button which has the same Button Number.
- This manually quick click Action Button operation can only be used to trigger pairing, not unpairing.
- If you want to exit Pairing Button Mode, what you need to do is that click the Action Button once.
How to unpair Button
There is only one way to trigger unpairing Button:
- With Configuration Set. Can only be done in the network. Refer to Configuration Parameter 48 for details.
Test Doorbell 6 sound manually.
You will be able to manually test your Doorbell 6 unpaired or paired to a Z-Wave network, to determine if its sound is working, perform the button action listed below:
Press and hold Action Button down for 2-5 seconds
Safety: Test only when wearing necessary ear protection. Doorbell 6s speaker emits tones up to 105dB that can cause hearing damage.
Quick trouble shooting
Here are a few hints for network installation if things dont work as expected.
Make sure a device is in factory reset state before including. In doubt exclude before include.1.
If inclusion still fails, check if both devices use the same frequency.2.
Remove all dead devices from associations. Otherwise you will see severe delays.3.
Never use sleeping battery devices without a central controller.4.
Dont poll FLIRS devices.5.
Make sure to have enough mains powered device to benefit from the meshing6.
Association - one device controls an other device
Z-Wave devices control other Z-Wave devices. The relationship between one device controlling another device is called association. In order to control a different
device, the controlling device needs to maintain a list of devices that will receive controlling commands. These lists are called association groups and they are
always related to certain events (e.g. button pressed, sensor triggers, ...). In case the event happens all devices stored in the respective association group will
receive the same wireless command wireless command, typically a 'Basic Set' Command.
3 de 11
4. Association Groups:
Group Number
Maximum
Nodes
Description
1 5 Lifeline group.
2 5 When Endpoint 1 starts playing tone or stops playing tone, Nodes associated are controlled
and will receive a Basic Set CC.
3 5 When Endpoint 2 starts playing tone or stops playing tone, Nodes associated are controlled
and will receive a Basic Set CC.
4 5 When Endpoint 3 starts playing tone or stops playing tone, Nodes associated are controlled
and will receive a Basic Set CC.
5 5 When Endpoint 4 starts playing tone or stops playing tone, Nodes associated are controlled
and will receive a Basic Set CC.
6 5 When Endpoint 5 starts playing tone or stops playing tone, Nodes associated are controlled
and will receive a Basic Set CC.
7 5 When Endpoint 6 starts playing tone or stops playing tone, Nodes associated are controlled
and will receive a Basic Set CC.
8 5 When Endpoint 7 starts playing tone or stops playing tone, Nodes associated are controlled
and will receive a Basic Set CC.
9 5 When Endpoint 8 starts playing tone or stops playing tone, Nodes associated are controlled
and will receive a Basic Set CC.
Configuration Parameters
Z-Wave products are supposed to work out of the box after inclusion, however certain configuration can adapt the function better to user needs or unlock further
enhanced features.
IMPORTANT: Controllers may only allow configuring signed values. In order to set values in the range 128 ... 255 the value sent in the application shall be the
desired value minus 256. For example: To set a parameter to 200 it may be needed to set a value of 200 minus 256 = minus 56. In case of a two byte value the
same logic applies: Values greater than 32768 may needed to be given as negative values too.
Parameter 1: Configure the Light Effect and Tone Play Mode for Endpoint 1(Browse).
Please refer to the Product Manual for more details.
Size: 4 Byte, Default Value: 16777216
Setting Description
16777216 - 2147418112 Configure the Light Effect and Tone Play Mode for Endpoint 1(Browse).
Parameter 2: Configure the Light Effect and Tone Effect for Endpoint 2(Tampering).
Please refer to the Product Manual for more details.
Size: 4 Byte, Default Value: 16777217
Setting Description
16777216 - 2147483647 Configure the Light Effect and Tone Effect for Endpoint 2(Tampering).
Parameter 3: Configure the Light Effect and Tone Effect for Endpoint 3(Doorbell 1).
Please refer to the Product Manual for more details.
Size: 4 Byte, Default Value: 33554433
Setting Description
16777216 - 2147483647 Configure the Light Effect and Tone Effect for Endpoint 3(Doorbell 1).
Parameter 4: Configure the Light Effect and Tone Effect for Endpoint 4(Doorbell 2).
Please refer to the Product Manual for more details.
Size: 4 Byte, Default Value: 33554433
Setting Description
16777216 - 2147483647 Configure the Light Effect and Tone Effect for Endpoint 4(Doorbell 2).
Parameter 5: Configure the Light Effect and Tone Effect for Endpoint 5(Doorbell 3).
Please refer to the Product Manual for more details.
Size: 4 Byte, Default Value: 33554433
Setting Description
16777216 - 2147483647 Configure the Light Effect and Tone Effect for Endpoint 5(Doorbell 3).
4 de 11
5. Parameter 6: Configure the Light Effect and Tone Effect for Endpoint 6(Environment).
Please refer to the Product Manual for more details.
Size: 4 Byte, Default Value: 67108864
Setting Description
16777216 - 2147483647 Configure the Light Effect and Tone Effect for Endpoint 6(Environment).
Parameter 7: Configure the Light Effect and Tone Effect for Endpoint 7(Security).
Please refer to the Product Manual for more details.
Size: 4 Byte, Default Value: 67108864
Setting Description
16777216 - 2147483647 Configure the Light Effect and Tone Effect for Endpoint 7(Security).
Parameter 8: Configure the Light Effect and Tone Effect for Endpoint 8(Emergency).
Please refer to the Product Manual for more details.
Size: 4 Byte, Default Value: 67108864
Setting Description
16777216 - 2147483647 Configure the Light Effect and Tone Effect for Endpoint 8(Emergency).
Parameter 16: Configure #1 Light Effect.
Please refer to the Product Manual for more details.
Size: 4 Byte, Default Value: 1259934723
Setting Description
0 - 2147483647 The Light Effect is displayed cyclically, and the maximum display duration is equal to the total duration of the
tone playback. In other words, the Light Effect will be displayed in a loop until stop playing tone.
Parameter 17: Configure #2 Light Effect.
Please refer to the Product Manual for more details.
Size: 4 Byte, Default Value: 842137603
Setting Description
0 - 2147483647 The Light Effect is displayed cyclically, and the maximum display duration is equal to the total duration of the
tone playback. In other words, the Light Effect will be displayed in a loop until stop playing tone.
Parameter 18: Configure #3 Light Effect.
Please refer to the Product Manual for more details.
Size: 4 Byte, Default Value: 2162947
Setting Description
0 - 2147483647 The Light Effect is displayed cyclically, and the maximum display duration is equal to the total duration of the
tone playback. In other words, the Light Effect will be displayed in a loop until stop playing tone.
Parameter 19: Configure #4 Light Effect.
Please refer to the Product Manual for more details.
Size: 4 Byte, Default Value: 553648131
Setting Description
0 - 2147483647 The Light Effect is displayed cyclically, and the maximum display duration is equal to the total duration of the
tone playback. In other words, the Light Effect will be displayed in a loop until stop playing tone.
Parameter 20: Configure #5 Light Effect.
Please refer to the Product Manual for more details.
Size: 1 Byte, Default Value: 10
Setting Description
0 - 2147483647 The Light Effect is displayed cyclically, and the maximum display duration is equal to the total duration of the
tone playback. In other words, the Light Effect will be displayed in a loop until stop playing tone.
Parameter 21: Configure #6 Light Effect.
Please refer to the Product Manual for more details.
Size: 4 Byte, Default Value: 2560
5 de 11
6. Setting Description
0 - 2147483647 The Light Effect is displayed cyclically, and the maximum display duration is equal to the total duration of the
tone playback. In other words, the Light Effect will be displayed in a loop until stop playing tone.
Parameter 22: Configure #7 Light Effect.
Please refer to the Product Manual for more details.
Size: 4 Byte, Default Value: 553648129
Setting Description
0 - 2147483647 The Light Effect is displayed cyclically, and the maximum display duration is equal to the total duration of the
tone playback. In other words, the Light Effect will be displayed in a loop until stop playing tone.
Parameter 32: Configure how to send Basic Set to nodes in Group 2.
Size: 1 Byte, Default Value: 3
Setting Description
0 Dont send Basic Set.
1 When Endpoint 1 starts playing tone, send Basic Set 0xFF. When Endpoint 1 stops playing tone, dont send
Basic Set.
2 When Endpoint 1 starts playing tone, send Basic Set 0x00. When Endpoint 1 stops playing tone, dont send
Basic Set.
3 When Endpoint 1 starts playing tone, send Basic Set 0xFF. When Endpoint 1 stops playing tone, send Basic Set
0x00.
4 When Endpoint 1 starts playing tone, send Basic Set 0x00. When Endpoint 1 stops playing tone, send Basic Set
0xFF.
Parameter 33: Configure how to send Basic Set to nodes in Group 3.
Size: 1 Byte, Default Value: 3
Setting Description
0 Dont send Basic Set.
1 When Endpoint 2 starts playing tone, send Basic Set 0xFF. When Endpoint 2 stops playing tone, dont send
Basic Set.
2 When Endpoint 2 starts playing tone, send Basic Set 0x00. When Endpoint 2 stops playing tone, dont send
Basic Set.
3 When Endpoint 2 starts playing tone, send Basic Set 0xFF. When Endpoint 2 stops playing tone, send Basic Set
0x00.
4 When Endpoint 2 starts playing tone, send Basic Set 0x00. When Endpoint 2 stops playing tone, send Basic Set
0xFF.
Parameter 34: Configure how to send Basic Set to nodes in Group 4.
Size: 1 Byte, Default Value: 3
Setting Description
0 Dont send Basic Set.
1 When Endpoint 3 starts playing tone, send Basic Set 0xFF. When Endpoint 3 stops playing tone, dont send
Basic Set.
2 When Endpoint 3 starts playing tone, send Basic Set 0x00. When Endpoint 3 stops playing tone, dont send
Basic Set.
3 When Endpoint 3 starts playing tone, send Basic Set 0xFF. When Endpoint 3 stops playing tone, send Basic Set
0x00.
4 When Endpoint 3 starts playing tone, send Basic Set 0x00. When Endpoint 3 stops playing tone, send Basic Set
0xFF.
Parameter 35: Configure how to send Basic Set to nodes in Group 5.
Size: 1 Byte, Default Value: 3
6 de 11
7. Setting Description
0 Dont send Basic Set.
1 When Endpoint 4 starts playing tone, send Basic Set 0xFF. When Endpoint 4 stops playing tone, dont send
Basic Set.
2 When Endpoint 4 starts playing tone, send Basic Set 0x00. When Endpoint 4 stops playing tone, dont send
Basic Set.
3 When Endpoint 4 starts playing tone, send Basic Set 0xFF. When Endpoint 4 stops playing tone, send Basic Set
0x00.
4 When Endpoint 4 starts playing tone, send Basic Set 0x00. When Endpoint 4 stops playing tone, send Basic Set
0xFF.
Parameter 36: Configure how to send Basic Set to nodes in Group 6.
Size: 1 Byte, Default Value: 3
Setting Description
0 Dont send Basic Set.
1 When Endpoint 5 starts playing tone, send Basic Set 0xFF. When Endpoint 5 stops playing tone, dont send
Basic Set.
2 When Endpoint 5 starts playing tone, send Basic Set 0x00. When Endpoint 5 stops playing tone, dont send
Basic Set.
3 When Endpoint 5 starts playing tone, send Basic Set 0xFF. When Endpoint 5 stops playing tone, send Basic Set
0x00.
4 When Endpoint 5 starts playing tone, send Basic Set 0x00. When Endpoint 5 stops playing tone, send Basic Set
0xFF.
Parameter 37: Configure how to send Basic Set to nodes in Group 7.
Size: 1 Byte, Default Value: 3
Setting Description
0 Dont send Basic Set.
1 When Endpoint 6 starts playing tone, send Basic Set 0xFF. When Endpoint 6 stops playing tone, dont send
Basic Set.
2 When Endpoint 6 starts playing tone, send Basic Set 0x00. When Endpoint 6 stops playing tone, dont send
Basic Set.
3 When Endpoint 6 starts playing tone, send Basic Set 0xFF. When Endpoint 6 stops playing tone, send Basic Set
0x00.
4 When Endpoint 6 starts playing tone, send Basic Set 0x00. When Endpoint 6 stops playing tone, send Basic Set
0xFF.
Parameter 38: Configure how to send Basic Set to nodes in Group 8.
Size: 1 Byte, Default Value: 3
Setting Description
0 Dont send Basic Set.
1 When Endpoint 7 starts playing tone, send Basic Set 0xFF. When Endpoint 7 stops playing tone, dont send
Basic Set.
2 When Endpoint 7 starts playing tone, send Basic Set 0x00. When Endpoint 7 stops playing tone, dont send
Basic Set.
3 When Endpoint 7 starts playing tone, send Basic Set 0xFF. When Endpoint 7 stops playing tone, send Basic Set
0x00.
4 When Endpoint 7 starts playing tone, send Basic Set 0x00. When Endpoint 7 stops playing tone, send Basic Set
0xFF.
Parameter 39: Configure how to send Basic Set to nodes in Group 9.
Size: 1 Byte, Default Value: 3
7 de 11
8. Setting Description
0 Dont send Basic Set.
1 When Endpoint 8 starts playing tone, send Basic Set 0xFF. When Endpoint 8 stops playing tone, dont send
Basic Set.
2 When Endpoint 8 starts playing tone, send Basic Set 0x00. When Endpoint 8 stops playing tone, dont send
Basic Set.
3 When Endpoint 8 starts playing tone, send Basic Set 0xFF. When Endpoint 8 stops playing tone, send Basic Set
0x00.
4 When Endpoint 8 starts playing tone, send Basic Set 0x00. When Endpoint 8 stops playing tone, send Basic Set
0xFF.
Parameter 48: Tigger Unpairing Button Mode (Write Only)
(1) Can trigger unpairing multiple Buttons at one time.(2) User does not need to do anything to Button.(3) Indicator Light will quickly flash white light 3 times when
Unpairing Button Mode finishes.
Size: 1 Byte, Default Value: 0
Setting Description
1 Tigger Unpairing #1 Button Mode.
2 Tigger Unpairing #2 Button Mode.
3 Tigger Unpairing #2 and #1 Button Mode.
4 Tigger Unpairing #3 Button Mode.
5 Tigger Unpairing #3 and #1 Button Mode.
6 Tigger Unpairing #3 and #2 Button Mode.
7 Tigger Unpairing #3, #2 and #1 Button Mode.
Parameter 49: Tigger Pairing Button Mode (Write Only)
(1) Can NOT trigger pairing multiple Buttons at one time.(2) Pairing time is up to 10 seconds. In this time period, user MUST manually click Ring Button 3 times
quickly. Otherwise it cannot be paired successfully.(3) Each successful pairing will overwrite the previous paired Button which has the same Button Number.
Size: 1 Byte, Default Value: 0
Setting Description
0 Exit Pairing Button Mode.
1 Tigger Pairing #1 Button Mode.
2 Tigger Pairing #2 Button Mode.
4 Tigger Pairing #3 Button Mode.
Parameter 50: Report which Pairing Button Mode is triggered (Read Only)
Once Pairing Button Mode is triggered, node will automatically send this configuration report via Lifeline to inform which Button is waiting for being paired.
Size: 1 Byte, Default Value: 0
Setting Description
0 There is no Pairing Button Mode being triggered.
1 Pairing #1 Button Mode is triggered.
2 Pairing #2 Button Mode is triggered.
4 Pairing #3 Button Mode is triggered.
Parameter 51: Report which Buttons had been paired (Read Only)
Once Unpairing or Pairing Button Mode finishes, node will automatically send this configuration report via Lifeline to inform which Buttons had been paired. This
parameter does not restore to the default value when Chime is removed from the network or reset the factory settings.
Size: 1 Byte, Default Value: 0
8 de 11
9. Setting Description
0 There is no paired Button.
1 #1 Button had been paired.
2 #2 Button had been paired.
3 #2 and #1 Button had been paired.
4 #3 Button had been paired.
5 #3 and #1 Button had been paired.
6 #3 and #2 Button had been paired.
7 #3, #2 and #1 Button had been paired.
Parameter 52: Get the information of #1 Button (Read Only)
This parameter does not restore to the default value when Chime is removed from the network or reset the factory settings.
Size: 4 Byte, Default Value: 0
Setting Description
0 #1 Button is unpaired.
1 - 2147483647 Information about #1 Button, including battery voltage (unit is mV) and software version.
Parameter 53: Get the information of #2 Button (Read Only)
This parameter does not restore to the default value when Chime is removed from the network or reset the factory settings.
Size: 4 Byte, Default Value: 0
Setting Description
0 #2 Button is unpaired.
1 - 134217727 Information about #2 Button, including battery voltage (unit is mV) and software version.
Parameter 54: Get the information of #3 Button (Read Only)
This parameter does not restore to the default value when Chime is removed from the network or reset the factory settings.
Size: 4 Byte, Default Value: 0
Setting Description
0 #3 Button is unpaired.
1 - 2147483647 Information about #3 Button, including battery voltage (unit is mV) and software version.
Parameter 96: Enable or Disable the ability that click the Action Button to stop a playing tone.
Size: 1 Byte, Default Value: 0
Setting Description
0 Disable
1 Enable
Parameter 255: Factory Reset or Initialization (Write Only)
Parameter 51/52/53/54 will not restore the configuration settings to the default when Factory Reset or Initialization is performed.
Size: 4 Byte, Default Value: 0
Setting Description
0 Initialization: Initialize all configuration parameters to default values.
1431655765 Factory Reset: Restore the product to factory settings and remove from the network.
Technical Data
9 de 11
10. Dimensions 70x70x40 mm
Weight 139 gr
Hardware Platform ZM5101
EAN 1220000015982
IP Class IP 20
Voltage 5 V
Battery Type 1 * CR2032
Device Type Sound Switch
Network Operation Always On Slave
Z-Wave Version 6.71.03
Certification ID ZC10-19046416
Z-Wave Product Id 0x0371.0x0003.0x00A2
Color White
Outdoor Use ok
Firmware Updatable Updatable by Consumer by RF
Supported Notification Types Home SecurityPower ManagementSiren
Sensors Vibration/Shock (Binary)
Frequency Europe - 868,4 Mhz
Maximum transmission power 5 mW
Supported Command Classes
Association Grp Info
Association V2
Basic
Configuration
Device Reset Locally
Firmware Update Md V4
Manufacturer Specific V2
Multi Channel Association V3
Multi Channel V4
Notification V8
Powerlevel
Security
Security 2
Sound Switch
Supervision
Transport Service V2
Version V2
Zwaveplus Info V2
Controlled Command Classes
Basic
Explanation of Z-Wave specific terms
10 de 11
11. Controller — is a Z-Wave device with capabilities to manage the network. Controllers are typically Gateways,Remote Controls or battery operated wall
controllers.
Slave — is a Z-Wave device without capabilities to manage the network. Slaves can be sensors, actuators and even remote controls.
Primary Controller — is the central organizer of the network. It must be a controller. There can be only one primary controller in a Z-Wave network.
Inclusion — is the process of adding new Z-Wave devices into a network.
Exclusion — is the process of removing Z-Wave devices from the network.
Association — is a control relationship between a controlling device and a controlled device.
Wakeup Notification — is a special wireless message issued by a Z-Wave device to announces that is able to communicate.
Node Information Frame — is a special wireless message issued by a Z-Wave device to announce its capabilities and functions.
(c) 2019 Z-Wave Europe GmbH, Antonstr. 3, 09337 Hohenstein-Ernstthal, Germany, All rights reserved, www.zwave.eu. The template is maintained by Z-Wave
Europe GmbH. The product content is maintained by Z-Wave Europe GmbH , Supportteam, support@zwave.eu. Last update of the product data: 2019-07-12
13:01:55
11 de 11