SlideShare a Scribd company logo
Presentation on paper-
Concrete Cloth - Its Uses and
Application in Civil Engineering
Presented by-
OMKAR VIJAY SHELAR
FROM- ASHOKRAO MANE GROUP OF INSTITUTIONS,VATHAR
Introduction -
 Scope of concrete in construction
 concrete cloth-
Methodology
 General-
 C.C.Types
 CC Material Properties
Strength
Bending tests based on BS EN 12467:2004
- 10 day bending failure stress (MPa) 3.4
- 10 day bending Young’s modulus (MPa) 180
Abrasion Resistance (ASTM C1353-8)
- CC lost 60% less weight than marble over 1000 cycles.
Tensile Test
Abrasion Resistance (DIN 52108)
- Similar to twice that of OPC Max 0.10 gm/cm2
Physical Properties
Initial Set≥ 120 min
Final Set.≤ 240 min.
Method of Hydration-
1) Immersion.
2) Spraying.
Cutting of C.C.-
Fixing of C.C.-
Mechanical Fixing
1) Staples
2) Nails
3) Screws
4) Hog Rings
Finishing
Applications of C.C.
 Bund lining
 Slope Protection
 Pipeline Protection
 Ground Resurfacing
Mining Applications
 Ditch Lining
 Bund lining  Slope Protection
 Pipeline Protection Mining Applications
Advantages of CC
1) Rapid.
2) Easy to use.
3) Flexible.
4) Strong.
5) Fireproof.
6) Waterproof.
7) Durable.
8) Environmentally
Friendly.
Limitations of CC
1) cannot be over hydrated.
2) Not excess of water .
3) Do not jet high pressure
water .
4) working time of 1-2 hours
5) hot climates reduce
working time.
Conclusion
Concrete cloth (CC) is a unique proprietary material. It is a
time & material saving technique. It is very easy to place &
handle. Concrete cloth is a flexible; cement impregnated
fabric that hardens when hydrated to form a thin, durable,
water & fire proof concrete layer. Simply position the canvas
& just add water. CC has a design life of 10 years and is
significantly quicker and less expensive to install compared to
conventional concrete. It is specially used, where the
workmanship is very difficult. It is specially used in emergency
works such as in military.
Omkar (9764126682)

More Related Content

What's hot

Optimization of MRR in EDM Process with Different Job Material i.e Stainless ...
Optimization of MRR in EDM Process with Different Job Material i.e Stainless ...Optimization of MRR in EDM Process with Different Job Material i.e Stainless ...
Optimization of MRR in EDM Process with Different Job Material i.e Stainless ...
IJERA Editor
 
Non traditional machining
Non traditional machiningNon traditional machining
Non traditional machining
shreekumbhar3
 
Usm
UsmUsm
Ultrasonic Machining (USM)
Ultrasonic Machining (USM)Ultrasonic Machining (USM)
Ultrasonic Machining (USM)
Pusan National University
 
Final presentation #
Final presentation #Final presentation #
Final presentation #Soha Osama
 
CSIRO Additive Manufacturing - Aug 14
CSIRO Additive Manufacturing - Aug 14CSIRO Additive Manufacturing - Aug 14
CSIRO Additive Manufacturing - Aug 14
SME_Engagement
 
Micro and nano grinding
Micro and nano grindingMicro and nano grinding
Micro and nano grinding
Mohit Ostwal
 
Prysmian BICON 371 Aluminium Hook Cable Cleats
Prysmian BICON 371 Aluminium Hook Cable CleatsPrysmian BICON 371 Aluminium Hook Cable Cleats
Prysmian BICON 371 Aluminium Hook Cable Cleats
Thorne & Derrick International
 
820 c 2 e-3 group report
820 c 2  e-3 group report820 c 2  e-3 group report
820 c 2 e-3 group report
SOCRATES PALOMINO GAMBOA
 
Sajin r presentation1 seminar
Sajin r presentation1 seminarSajin r presentation1 seminar
Sajin r presentation1 seminar
sajin r
 
1408285
14082851408285
Nilesh
NileshNilesh
Machining of MMC
 Machining of MMC Machining of MMC
Machining of MMC
Haresh Mahala
 
Nestor cables flexible tube fibre optic cables
Nestor cables flexible tube fibre optic cablesNestor cables flexible tube fibre optic cables
Nestor cables flexible tube fibre optic cables
NestorExports
 
PlasmaChem_20090930-2_ppt_ver2
PlasmaChem_20090930-2_ppt_ver2PlasmaChem_20090930-2_ppt_ver2
PlasmaChem_20090930-2_ppt_ver2Ashish K Mahaseth
 
CHARACTERISTICS OF A HYBRID PROCESS OF EDM IN GAS COMBINED WITH ULTRASONIC VI...
CHARACTERISTICS OF A HYBRID PROCESS OF EDM IN GAS COMBINED WITH ULTRASONIC VI...CHARACTERISTICS OF A HYBRID PROCESS OF EDM IN GAS COMBINED WITH ULTRASONIC VI...
CHARACTERISTICS OF A HYBRID PROCESS OF EDM IN GAS COMBINED WITH ULTRASONIC VI...
Sayan Mallick
 
Prysmian BICON 370 Claw Cable Cleats - Spec Sheet
Prysmian BICON 370 Claw Cable Cleats - Spec SheetPrysmian BICON 370 Claw Cable Cleats - Spec Sheet
Prysmian BICON 370 Claw Cable Cleats - Spec Sheet
Thorne & Derrick International
 
Non-Traditional Machining Process (UCMP)
Non-Traditional Machining Process (UCMP)Non-Traditional Machining Process (UCMP)
Non-Traditional Machining Process (UCMP)
S. Sathishkumar
 

What's hot (20)

Optimization of MRR in EDM Process with Different Job Material i.e Stainless ...
Optimization of MRR in EDM Process with Different Job Material i.e Stainless ...Optimization of MRR in EDM Process with Different Job Material i.e Stainless ...
Optimization of MRR in EDM Process with Different Job Material i.e Stainless ...
 
Non traditional machining
Non traditional machiningNon traditional machining
Non traditional machining
 
Usm
UsmUsm
Usm
 
Ultrasonic Machining (USM)
Ultrasonic Machining (USM)Ultrasonic Machining (USM)
Ultrasonic Machining (USM)
 
Final presentation #
Final presentation #Final presentation #
Final presentation #
 
CSIRO Additive Manufacturing - Aug 14
CSIRO Additive Manufacturing - Aug 14CSIRO Additive Manufacturing - Aug 14
CSIRO Additive Manufacturing - Aug 14
 
Micro and nano grinding
Micro and nano grindingMicro and nano grinding
Micro and nano grinding
 
About Our PM
About Our PMAbout Our PM
About Our PM
 
Ged 2492
Ged 2492Ged 2492
Ged 2492
 
Prysmian BICON 371 Aluminium Hook Cable Cleats
Prysmian BICON 371 Aluminium Hook Cable CleatsPrysmian BICON 371 Aluminium Hook Cable Cleats
Prysmian BICON 371 Aluminium Hook Cable Cleats
 
820 c 2 e-3 group report
820 c 2  e-3 group report820 c 2  e-3 group report
820 c 2 e-3 group report
 
Sajin r presentation1 seminar
Sajin r presentation1 seminarSajin r presentation1 seminar
Sajin r presentation1 seminar
 
1408285
14082851408285
1408285
 
Nilesh
NileshNilesh
Nilesh
 
Machining of MMC
 Machining of MMC Machining of MMC
Machining of MMC
 
Nestor cables flexible tube fibre optic cables
Nestor cables flexible tube fibre optic cablesNestor cables flexible tube fibre optic cables
Nestor cables flexible tube fibre optic cables
 
PlasmaChem_20090930-2_ppt_ver2
PlasmaChem_20090930-2_ppt_ver2PlasmaChem_20090930-2_ppt_ver2
PlasmaChem_20090930-2_ppt_ver2
 
CHARACTERISTICS OF A HYBRID PROCESS OF EDM IN GAS COMBINED WITH ULTRASONIC VI...
CHARACTERISTICS OF A HYBRID PROCESS OF EDM IN GAS COMBINED WITH ULTRASONIC VI...CHARACTERISTICS OF A HYBRID PROCESS OF EDM IN GAS COMBINED WITH ULTRASONIC VI...
CHARACTERISTICS OF A HYBRID PROCESS OF EDM IN GAS COMBINED WITH ULTRASONIC VI...
 
Prysmian BICON 370 Claw Cable Cleats - Spec Sheet
Prysmian BICON 370 Claw Cable Cleats - Spec SheetPrysmian BICON 370 Claw Cable Cleats - Spec Sheet
Prysmian BICON 370 Claw Cable Cleats - Spec Sheet
 
Non-Traditional Machining Process (UCMP)
Non-Traditional Machining Process (UCMP)Non-Traditional Machining Process (UCMP)
Non-Traditional Machining Process (UCMP)
 

Viewers also liked

soha ahmed.txt
soha ahmed.txtsoha ahmed.txt
soha ahmed.txtSoha Ahmed
 
Key Expert Profiles - Egypt
Key Expert Profiles - EgyptKey Expert Profiles - Egypt
Key Expert Profiles - Egypt
DMI Associates
 
Rob stringer cv_feb_16
Rob stringer cv_feb_16Rob stringer cv_feb_16
Rob stringer cv_feb_16
Rob Stringer
 
الحقوق الجماعية - آين راند
الحقوق الجماعية - آين راندالحقوق الجماعية - آين راند
الحقوق الجماعية - آين راندAli Adi
 
Sangha et al 2013 ijms-14-03921
Sangha et al 2013 ijms-14-03921Sangha et al 2013 ijms-14-03921
Sangha et al 2013 ijms-14-03921Gary Jahn
 
Russia GRI 2015 Advance Brochure
Russia GRI 2015 Advance BrochureRussia GRI 2015 Advance Brochure
Russia GRI 2015 Advance Brochure
Andreas Schonning
 
Phys lo4
Phys lo4Phys lo4
Phys lo4
Sarah Raschella
 
FRANK BALLESTERO Resume 3-5-2015
FRANK BALLESTERO Resume 3-5-2015FRANK BALLESTERO Resume 3-5-2015
FRANK BALLESTERO Resume 3-5-2015Frank Ballestero
 
Asia GRI 2015 Brochure
Asia GRI 2015  BrochureAsia GRI 2015  Brochure
Asia GRI 2015 Brochure
Andreas Schonning
 
India GRI 2015 Advance Brochure
India GRI 2015 Advance BrochureIndia GRI 2015 Advance Brochure
India GRI 2015 Advance Brochure
Andreas Schonning
 
Wroclaw agglomeration sector analyses food sector
Wroclaw agglomeration sector analyses   food sectorWroclaw agglomeration sector analyses   food sector
Wroclaw agglomeration sector analyses food sector
Invest in Wroclaw
 
Designing for Collaboration
Designing for CollaborationDesigning for Collaboration
Designing for Collaboration
blakereary
 
Court-Uncourt-Vol-II-Issue I
Court-Uncourt-Vol-II-Issue ICourt-Uncourt-Vol-II-Issue I
Court-Uncourt-Vol-II-Issue IMohammed Tonnamly
 
Baby changecatalog2015
Baby changecatalog2015Baby changecatalog2015
Baby changecatalog2015
Richard Dawood
 
Resume_Dauglas Adjei.doc (1)
Resume_Dauglas Adjei.doc (1)Resume_Dauglas Adjei.doc (1)
Resume_Dauglas Adjei.doc (1)Doug Adjei
 
Wroclaw agglomeration sector analyses electronics
Wroclaw agglomeration sector analyses   electronicsWroclaw agglomeration sector analyses   electronics
Wroclaw agglomeration sector analyses electronics
Invest in Wroclaw
 

Viewers also liked (18)

soha ahmed.txt
soha ahmed.txtsoha ahmed.txt
soha ahmed.txt
 
Key Expert Profiles - Egypt
Key Expert Profiles - EgyptKey Expert Profiles - Egypt
Key Expert Profiles - Egypt
 
Untitled Presentation
Untitled PresentationUntitled Presentation
Untitled Presentation
 
Rob stringer cv_feb_16
Rob stringer cv_feb_16Rob stringer cv_feb_16
Rob stringer cv_feb_16
 
الحقوق الجماعية - آين راند
الحقوق الجماعية - آين راندالحقوق الجماعية - آين راند
الحقوق الجماعية - آين راند
 
Sangha et al 2013 ijms-14-03921
Sangha et al 2013 ijms-14-03921Sangha et al 2013 ijms-14-03921
Sangha et al 2013 ijms-14-03921
 
Russia GRI 2015 Advance Brochure
Russia GRI 2015 Advance BrochureRussia GRI 2015 Advance Brochure
Russia GRI 2015 Advance Brochure
 
Phys lo4
Phys lo4Phys lo4
Phys lo4
 
AGENTES TERATOGENICOS
AGENTES TERATOGENICOSAGENTES TERATOGENICOS
AGENTES TERATOGENICOS
 
FRANK BALLESTERO Resume 3-5-2015
FRANK BALLESTERO Resume 3-5-2015FRANK BALLESTERO Resume 3-5-2015
FRANK BALLESTERO Resume 3-5-2015
 
Asia GRI 2015 Brochure
Asia GRI 2015  BrochureAsia GRI 2015  Brochure
Asia GRI 2015 Brochure
 
India GRI 2015 Advance Brochure
India GRI 2015 Advance BrochureIndia GRI 2015 Advance Brochure
India GRI 2015 Advance Brochure
 
Wroclaw agglomeration sector analyses food sector
Wroclaw agglomeration sector analyses   food sectorWroclaw agglomeration sector analyses   food sector
Wroclaw agglomeration sector analyses food sector
 
Designing for Collaboration
Designing for CollaborationDesigning for Collaboration
Designing for Collaboration
 
Court-Uncourt-Vol-II-Issue I
Court-Uncourt-Vol-II-Issue ICourt-Uncourt-Vol-II-Issue I
Court-Uncourt-Vol-II-Issue I
 
Baby changecatalog2015
Baby changecatalog2015Baby changecatalog2015
Baby changecatalog2015
 
Resume_Dauglas Adjei.doc (1)
Resume_Dauglas Adjei.doc (1)Resume_Dauglas Adjei.doc (1)
Resume_Dauglas Adjei.doc (1)
 
Wroclaw agglomeration sector analyses electronics
Wroclaw agglomeration sector analyses   electronicsWroclaw agglomeration sector analyses   electronics
Wroclaw agglomeration sector analyses electronics
 

Similar to Omkar (9764126682)

concrete cloth
concrete clothconcrete cloth
concrete cloth
omkar shelar
 
MICROSTRUCTURAL CHARACTERIZATION AND HOT EROSION BEHAVIOR OF CRC-NICR COATED ...
MICROSTRUCTURAL CHARACTERIZATION AND HOT EROSION BEHAVIOR OF CRC-NICR COATED ...MICROSTRUCTURAL CHARACTERIZATION AND HOT EROSION BEHAVIOR OF CRC-NICR COATED ...
MICROSTRUCTURAL CHARACTERIZATION AND HOT EROSION BEHAVIOR OF CRC-NICR COATED ...
IAEME Publication
 
concrete cloths
concrete clothsconcrete cloths
concrete cloths
Ayan Civilien
 
Effect of machining parameters on surface roughness for 6063 al tic (5 & 10 %...
Effect of machining parameters on surface roughness for 6063 al tic (5 & 10 %...Effect of machining parameters on surface roughness for 6063 al tic (5 & 10 %...
Effect of machining parameters on surface roughness for 6063 al tic (5 & 10 %...
eSAT Publishing House
 
Effect of machining parameters on surface roughness for 6063 al tic (5 & ...
Effect of machining parameters on surface roughness for 6063 al tic (5 & ...Effect of machining parameters on surface roughness for 6063 al tic (5 & ...
Effect of machining parameters on surface roughness for 6063 al tic (5 & ...
eSAT Journals
 
10.1177@0954406220909849.pdf
10.1177@0954406220909849.pdf10.1177@0954406220909849.pdf
10.1177@0954406220909849.pdf
SmrutiRanjanPattanay2
 
10.1177@0954406220909849.pdf
10.1177@0954406220909849.pdf10.1177@0954406220909849.pdf
10.1177@0954406220909849.pdf
smruti79
 
IRJET- Flexural Behaviour of RCC Beam with Partially Replaced Concrete be...
IRJET-  	  Flexural Behaviour of RCC Beam with Partially Replaced Concrete be...IRJET-  	  Flexural Behaviour of RCC Beam with Partially Replaced Concrete be...
IRJET- Flexural Behaviour of RCC Beam with Partially Replaced Concrete be...
IRJET Journal
 
IRJET- Experimental Investigation on Metakaolin Modified Fiber Reinforced Con...
IRJET- Experimental Investigation on Metakaolin Modified Fiber Reinforced Con...IRJET- Experimental Investigation on Metakaolin Modified Fiber Reinforced Con...
IRJET- Experimental Investigation on Metakaolin Modified Fiber Reinforced Con...
IRJET Journal
 
20392769 design-calculation-cathodic-protection-impressed-cureent-system
20392769 design-calculation-cathodic-protection-impressed-cureent-system20392769 design-calculation-cathodic-protection-impressed-cureent-system
20392769 design-calculation-cathodic-protection-impressed-cureent-system
Adeoye Okunoye
 
20392769 design-calculation-cathodic-protection-impressed-cureent-system
20392769 design-calculation-cathodic-protection-impressed-cureent-system20392769 design-calculation-cathodic-protection-impressed-cureent-system
20392769 design-calculation-cathodic-protection-impressed-cureent-system
Adeoye Okunoye
 
Railway inspection
Railway inspectionRailway inspection
Railway inspection
KungKittiphong1
 
IRJET- An Experimantal Investigation of Concrete with Artificial Sand
IRJET- An Experimantal Investigation of Concrete with Artificial SandIRJET- An Experimantal Investigation of Concrete with Artificial Sand
IRJET- An Experimantal Investigation of Concrete with Artificial Sand
IRJET Journal
 
file-no-10-api-936_compress.pdf
file-no-10-api-936_compress.pdffile-no-10-api-936_compress.pdf
file-no-10-api-936_compress.pdf
ErRANaveen1
 
IRJET- Studies on Drilling Characteristics of Heat Treated Aluminium A356/Sil...
IRJET- Studies on Drilling Characteristics of Heat Treated Aluminium A356/Sil...IRJET- Studies on Drilling Characteristics of Heat Treated Aluminium A356/Sil...
IRJET- Studies on Drilling Characteristics of Heat Treated Aluminium A356/Sil...
IRJET Journal
 
Investigation of mechanical properties of carbidic ductile cast iron
Investigation of mechanical properties of carbidic ductile cast ironInvestigation of mechanical properties of carbidic ductile cast iron
Investigation of mechanical properties of carbidic ductile cast iron
RSIS International
 
Mst bar technical data
Mst bar technical dataMst bar technical data
Mst bar technical data
Hamed Moosaei
 
KM_Information_Jan_2016_Red
KM_Information_Jan_2016_RedKM_Information_Jan_2016_Red
KM_Information_Jan_2016_RedRalph Tapphorn
 
IRJET- Experimental Analysis of Fracture Toughness and Microstructure Analysi...
IRJET- Experimental Analysis of Fracture Toughness and Microstructure Analysi...IRJET- Experimental Analysis of Fracture Toughness and Microstructure Analysi...
IRJET- Experimental Analysis of Fracture Toughness and Microstructure Analysi...
IRJET Journal
 

Similar to Omkar (9764126682) (20)

concrete cloth
concrete clothconcrete cloth
concrete cloth
 
MICROSTRUCTURAL CHARACTERIZATION AND HOT EROSION BEHAVIOR OF CRC-NICR COATED ...
MICROSTRUCTURAL CHARACTERIZATION AND HOT EROSION BEHAVIOR OF CRC-NICR COATED ...MICROSTRUCTURAL CHARACTERIZATION AND HOT EROSION BEHAVIOR OF CRC-NICR COATED ...
MICROSTRUCTURAL CHARACTERIZATION AND HOT EROSION BEHAVIOR OF CRC-NICR COATED ...
 
concrete cloths
concrete clothsconcrete cloths
concrete cloths
 
30120140501014
3012014050101430120140501014
30120140501014
 
Effect of machining parameters on surface roughness for 6063 al tic (5 & 10 %...
Effect of machining parameters on surface roughness for 6063 al tic (5 & 10 %...Effect of machining parameters on surface roughness for 6063 al tic (5 & 10 %...
Effect of machining parameters on surface roughness for 6063 al tic (5 & 10 %...
 
Effect of machining parameters on surface roughness for 6063 al tic (5 & ...
Effect of machining parameters on surface roughness for 6063 al tic (5 & ...Effect of machining parameters on surface roughness for 6063 al tic (5 & ...
Effect of machining parameters on surface roughness for 6063 al tic (5 & ...
 
10.1177@0954406220909849.pdf
10.1177@0954406220909849.pdf10.1177@0954406220909849.pdf
10.1177@0954406220909849.pdf
 
10.1177@0954406220909849.pdf
10.1177@0954406220909849.pdf10.1177@0954406220909849.pdf
10.1177@0954406220909849.pdf
 
IRJET- Flexural Behaviour of RCC Beam with Partially Replaced Concrete be...
IRJET-  	  Flexural Behaviour of RCC Beam with Partially Replaced Concrete be...IRJET-  	  Flexural Behaviour of RCC Beam with Partially Replaced Concrete be...
IRJET- Flexural Behaviour of RCC Beam with Partially Replaced Concrete be...
 
IRJET- Experimental Investigation on Metakaolin Modified Fiber Reinforced Con...
IRJET- Experimental Investigation on Metakaolin Modified Fiber Reinforced Con...IRJET- Experimental Investigation on Metakaolin Modified Fiber Reinforced Con...
IRJET- Experimental Investigation on Metakaolin Modified Fiber Reinforced Con...
 
20392769 design-calculation-cathodic-protection-impressed-cureent-system
20392769 design-calculation-cathodic-protection-impressed-cureent-system20392769 design-calculation-cathodic-protection-impressed-cureent-system
20392769 design-calculation-cathodic-protection-impressed-cureent-system
 
20392769 design-calculation-cathodic-protection-impressed-cureent-system
20392769 design-calculation-cathodic-protection-impressed-cureent-system20392769 design-calculation-cathodic-protection-impressed-cureent-system
20392769 design-calculation-cathodic-protection-impressed-cureent-system
 
Railway inspection
Railway inspectionRailway inspection
Railway inspection
 
IRJET- An Experimantal Investigation of Concrete with Artificial Sand
IRJET- An Experimantal Investigation of Concrete with Artificial SandIRJET- An Experimantal Investigation of Concrete with Artificial Sand
IRJET- An Experimantal Investigation of Concrete with Artificial Sand
 
file-no-10-api-936_compress.pdf
file-no-10-api-936_compress.pdffile-no-10-api-936_compress.pdf
file-no-10-api-936_compress.pdf
 
IRJET- Studies on Drilling Characteristics of Heat Treated Aluminium A356/Sil...
IRJET- Studies on Drilling Characteristics of Heat Treated Aluminium A356/Sil...IRJET- Studies on Drilling Characteristics of Heat Treated Aluminium A356/Sil...
IRJET- Studies on Drilling Characteristics of Heat Treated Aluminium A356/Sil...
 
Investigation of mechanical properties of carbidic ductile cast iron
Investigation of mechanical properties of carbidic ductile cast ironInvestigation of mechanical properties of carbidic ductile cast iron
Investigation of mechanical properties of carbidic ductile cast iron
 
Mst bar technical data
Mst bar technical dataMst bar technical data
Mst bar technical data
 
KM_Information_Jan_2016_Red
KM_Information_Jan_2016_RedKM_Information_Jan_2016_Red
KM_Information_Jan_2016_Red
 
IRJET- Experimental Analysis of Fracture Toughness and Microstructure Analysi...
IRJET- Experimental Analysis of Fracture Toughness and Microstructure Analysi...IRJET- Experimental Analysis of Fracture Toughness and Microstructure Analysi...
IRJET- Experimental Analysis of Fracture Toughness and Microstructure Analysi...
 

Recently uploaded

ethical hacking-mobile hacking methods.ppt
ethical hacking-mobile hacking methods.pptethical hacking-mobile hacking methods.ppt
ethical hacking-mobile hacking methods.ppt
Jayaprasanna4
 
Planning Of Procurement o different goods and services
Planning Of Procurement o different goods and servicesPlanning Of Procurement o different goods and services
Planning Of Procurement o different goods and services
JoytuBarua2
 
Quality defects in TMT Bars, Possible causes and Potential Solutions.
Quality defects in TMT Bars, Possible causes and Potential Solutions.Quality defects in TMT Bars, Possible causes and Potential Solutions.
Quality defects in TMT Bars, Possible causes and Potential Solutions.
PrashantGoswami42
 
addressing modes in computer architecture
addressing modes  in computer architectureaddressing modes  in computer architecture
addressing modes in computer architecture
ShahidSultan24
 
weather web application report.pdf
weather web application report.pdfweather web application report.pdf
weather web application report.pdf
Pratik Pawar
 
COLLEGE BUS MANAGEMENT SYSTEM PROJECT REPORT.pdf
COLLEGE BUS MANAGEMENT SYSTEM PROJECT REPORT.pdfCOLLEGE BUS MANAGEMENT SYSTEM PROJECT REPORT.pdf
COLLEGE BUS MANAGEMENT SYSTEM PROJECT REPORT.pdf
Kamal Acharya
 
TECHNICAL TRAINING MANUAL GENERAL FAMILIARIZATION COURSE
TECHNICAL TRAINING MANUAL   GENERAL FAMILIARIZATION COURSETECHNICAL TRAINING MANUAL   GENERAL FAMILIARIZATION COURSE
TECHNICAL TRAINING MANUAL GENERAL FAMILIARIZATION COURSE
DuvanRamosGarzon1
 
Courier management system project report.pdf
Courier management system project report.pdfCourier management system project report.pdf
Courier management system project report.pdf
Kamal Acharya
 
ethical hacking in wireless-hacking1.ppt
ethical hacking in wireless-hacking1.pptethical hacking in wireless-hacking1.ppt
ethical hacking in wireless-hacking1.ppt
Jayaprasanna4
 
AKS UNIVERSITY Satna Final Year Project By OM Hardaha.pdf
AKS UNIVERSITY Satna Final Year Project By OM Hardaha.pdfAKS UNIVERSITY Satna Final Year Project By OM Hardaha.pdf
AKS UNIVERSITY Satna Final Year Project By OM Hardaha.pdf
SamSarthak3
 
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)
MdTanvirMahtab2
 
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...
Amil Baba Dawood bangali
 
Vaccine management system project report documentation..pdf
Vaccine management system project report documentation..pdfVaccine management system project report documentation..pdf
Vaccine management system project report documentation..pdf
Kamal Acharya
 
Design and Analysis of Algorithms-DP,Backtracking,Graphs,B&B
Design and Analysis of Algorithms-DP,Backtracking,Graphs,B&BDesign and Analysis of Algorithms-DP,Backtracking,Graphs,B&B
Design and Analysis of Algorithms-DP,Backtracking,Graphs,B&B
Sreedhar Chowdam
 
Standard Reomte Control Interface - Neometrix
Standard Reomte Control Interface - NeometrixStandard Reomte Control Interface - Neometrix
Standard Reomte Control Interface - Neometrix
Neometrix_Engineering_Pvt_Ltd
 
LIGA(E)11111111111111111111111111111111111111111.ppt
LIGA(E)11111111111111111111111111111111111111111.pptLIGA(E)11111111111111111111111111111111111111111.ppt
LIGA(E)11111111111111111111111111111111111111111.ppt
ssuser9bd3ba
 
Architectural Portfolio Sean Lockwood
Architectural Portfolio Sean LockwoodArchitectural Portfolio Sean Lockwood
Architectural Portfolio Sean Lockwood
seandesed
 
Democratizing Fuzzing at Scale by Abhishek Arya
Democratizing Fuzzing at Scale by Abhishek AryaDemocratizing Fuzzing at Scale by Abhishek Arya
Democratizing Fuzzing at Scale by Abhishek Arya
abh.arya
 
Hybrid optimization of pumped hydro system and solar- Engr. Abdul-Azeez.pdf
Hybrid optimization of pumped hydro system and solar- Engr. Abdul-Azeez.pdfHybrid optimization of pumped hydro system and solar- Engr. Abdul-Azeez.pdf
Hybrid optimization of pumped hydro system and solar- Engr. Abdul-Azeez.pdf
fxintegritypublishin
 
Halogenation process of chemical process industries
Halogenation process of chemical process industriesHalogenation process of chemical process industries
Halogenation process of chemical process industries
MuhammadTufail242431
 

Recently uploaded (20)

ethical hacking-mobile hacking methods.ppt
ethical hacking-mobile hacking methods.pptethical hacking-mobile hacking methods.ppt
ethical hacking-mobile hacking methods.ppt
 
Planning Of Procurement o different goods and services
Planning Of Procurement o different goods and servicesPlanning Of Procurement o different goods and services
Planning Of Procurement o different goods and services
 
Quality defects in TMT Bars, Possible causes and Potential Solutions.
Quality defects in TMT Bars, Possible causes and Potential Solutions.Quality defects in TMT Bars, Possible causes and Potential Solutions.
Quality defects in TMT Bars, Possible causes and Potential Solutions.
 
addressing modes in computer architecture
addressing modes  in computer architectureaddressing modes  in computer architecture
addressing modes in computer architecture
 
weather web application report.pdf
weather web application report.pdfweather web application report.pdf
weather web application report.pdf
 
COLLEGE BUS MANAGEMENT SYSTEM PROJECT REPORT.pdf
COLLEGE BUS MANAGEMENT SYSTEM PROJECT REPORT.pdfCOLLEGE BUS MANAGEMENT SYSTEM PROJECT REPORT.pdf
COLLEGE BUS MANAGEMENT SYSTEM PROJECT REPORT.pdf
 
TECHNICAL TRAINING MANUAL GENERAL FAMILIARIZATION COURSE
TECHNICAL TRAINING MANUAL   GENERAL FAMILIARIZATION COURSETECHNICAL TRAINING MANUAL   GENERAL FAMILIARIZATION COURSE
TECHNICAL TRAINING MANUAL GENERAL FAMILIARIZATION COURSE
 
Courier management system project report.pdf
Courier management system project report.pdfCourier management system project report.pdf
Courier management system project report.pdf
 
ethical hacking in wireless-hacking1.ppt
ethical hacking in wireless-hacking1.pptethical hacking in wireless-hacking1.ppt
ethical hacking in wireless-hacking1.ppt
 
AKS UNIVERSITY Satna Final Year Project By OM Hardaha.pdf
AKS UNIVERSITY Satna Final Year Project By OM Hardaha.pdfAKS UNIVERSITY Satna Final Year Project By OM Hardaha.pdf
AKS UNIVERSITY Satna Final Year Project By OM Hardaha.pdf
 
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)
 
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...
 
Vaccine management system project report documentation..pdf
Vaccine management system project report documentation..pdfVaccine management system project report documentation..pdf
Vaccine management system project report documentation..pdf
 
Design and Analysis of Algorithms-DP,Backtracking,Graphs,B&B
Design and Analysis of Algorithms-DP,Backtracking,Graphs,B&BDesign and Analysis of Algorithms-DP,Backtracking,Graphs,B&B
Design and Analysis of Algorithms-DP,Backtracking,Graphs,B&B
 
Standard Reomte Control Interface - Neometrix
Standard Reomte Control Interface - NeometrixStandard Reomte Control Interface - Neometrix
Standard Reomte Control Interface - Neometrix
 
LIGA(E)11111111111111111111111111111111111111111.ppt
LIGA(E)11111111111111111111111111111111111111111.pptLIGA(E)11111111111111111111111111111111111111111.ppt
LIGA(E)11111111111111111111111111111111111111111.ppt
 
Architectural Portfolio Sean Lockwood
Architectural Portfolio Sean LockwoodArchitectural Portfolio Sean Lockwood
Architectural Portfolio Sean Lockwood
 
Democratizing Fuzzing at Scale by Abhishek Arya
Democratizing Fuzzing at Scale by Abhishek AryaDemocratizing Fuzzing at Scale by Abhishek Arya
Democratizing Fuzzing at Scale by Abhishek Arya
 
Hybrid optimization of pumped hydro system and solar- Engr. Abdul-Azeez.pdf
Hybrid optimization of pumped hydro system and solar- Engr. Abdul-Azeez.pdfHybrid optimization of pumped hydro system and solar- Engr. Abdul-Azeez.pdf
Hybrid optimization of pumped hydro system and solar- Engr. Abdul-Azeez.pdf
 
Halogenation process of chemical process industries
Halogenation process of chemical process industriesHalogenation process of chemical process industries
Halogenation process of chemical process industries
 

Omkar (9764126682)

  • 1.
  • 2. Presentation on paper- Concrete Cloth - Its Uses and Application in Civil Engineering Presented by- OMKAR VIJAY SHELAR FROM- ASHOKRAO MANE GROUP OF INSTITUTIONS,VATHAR
  • 3. Introduction -  Scope of concrete in construction  concrete cloth-
  • 4. Methodology  General-  C.C.Types  CC Material Properties Strength Bending tests based on BS EN 12467:2004 - 10 day bending failure stress (MPa) 3.4 - 10 day bending Young’s modulus (MPa) 180
  • 5. Abrasion Resistance (ASTM C1353-8) - CC lost 60% less weight than marble over 1000 cycles. Tensile Test Abrasion Resistance (DIN 52108) - Similar to twice that of OPC Max 0.10 gm/cm2 Physical Properties Initial Set≥ 120 min Final Set.≤ 240 min.
  • 6. Method of Hydration- 1) Immersion. 2) Spraying. Cutting of C.C.- Fixing of C.C.- Mechanical Fixing 1) Staples 2) Nails 3) Screws 4) Hog Rings Finishing Applications of C.C.  Bund lining  Slope Protection  Pipeline Protection  Ground Resurfacing Mining Applications  Ditch Lining
  • 7.  Bund lining  Slope Protection  Pipeline Protection Mining Applications
  • 8. Advantages of CC 1) Rapid. 2) Easy to use. 3) Flexible. 4) Strong. 5) Fireproof. 6) Waterproof. 7) Durable. 8) Environmentally Friendly. Limitations of CC 1) cannot be over hydrated. 2) Not excess of water . 3) Do not jet high pressure water . 4) working time of 1-2 hours 5) hot climates reduce working time.
  • 9. Conclusion Concrete cloth (CC) is a unique proprietary material. It is a time & material saving technique. It is very easy to place & handle. Concrete cloth is a flexible; cement impregnated fabric that hardens when hydrated to form a thin, durable, water & fire proof concrete layer. Simply position the canvas & just add water. CC has a design life of 10 years and is significantly quicker and less expensive to install compared to conventional concrete. It is specially used, where the workmanship is very difficult. It is specially used in emergency works such as in military.