Civil and environmental engineer having more than 10 years experience in environmental consultancy, municipal government and teaching / research institutions
This document contains the resume of Mallikarjun S.D, an Indian citizen who holds an M.Tech in Environmental Engineering. He has over 9 years of experience in areas like air quality monitoring, water treatment, waste water treatment, and environmental impact assessment. He is currently working as an Environment Engineer at Vasavadatta Cements Sedam, where his responsibilities include ensuring regulatory compliance and maintaining pollution control systems. Prior to this, he has worked as a faculty member and consulting engineer in Ethiopia, and as a project coordinator for a construction company in India. He has expertise in areas like stack monitoring, water technology, quality control systems, and concrete construction.
This document provides a summary of a post impact assessment report for Nestle's tri-generation power plant. The report includes chapters on plant description, environmental impacts, mitigation measures, and environmental management plan. Key findings are that the power plant is expected to reduce greenhouse gas emissions and improve electricity supply stability. Impacts on air and water quality are assessed, along with waste generation and management. The study was conducted over two months to evaluate the plant's environmental performance and compliance with regulations.
This document provides a summary of the quarter 1 impact mitigation monitoring report for Nestle Waters Greenfield Factory project in Abaji, FCT Abuja, Nigeria. Key points include:
- Air, water, soil and vegetation were sampled from 9 stations to monitor impacts from construction activities and compliance with standards.
- Air quality, noise levels, water quality and soil quality were found to be within standards except for slightly elevated levels of some parameters near construction areas.
- Vegetation and wildlife have been impacted by land clearing for construction but mitigation measures like replanting and fencing are being implemented.
- Socioeconomic impacts are being mitigated through compensation, local employment, and consultations
Liz Marble has over 16 years of experience in environmental, health and safety management in both the public and private sectors. She has served as an EHS Manager and Environmental Engineer for companies including Eramet Marietta, GE Energy, and the University of Missouri-Columbia. Her experience includes managing environmental compliance programs, permits, audits, emergency response and hazardous waste. She is a Certified Hazardous Materials Manager and holds additional certifications in asbestos inspection, radiation safety and first aid.
Nadjia LaFontaine has over 15 years of experience in project management and environmental engineering. She has worked at Ingredion Canada for over 15 years in various roles including process engineer, environmental engineer, and network administrator. She has extensive experience with regulatory compliance, environmental reporting, budgeting, and leading projects from concept to completion valued at up to $2.5 million. Currently she works independently on various construction and agricultural projects while seeking new employment opportunities to utilize her engineering and management experience.
Australian indoor environment rating tools, and the future of building health...Michael Taranto
Presentation to AIRAH 2016 - The Future of HVAC
By Joe Scholz and Mark Graham, QED Environmental Services
Explains the link between indoor environment and productivity of office building occupants, and how this impacts tenants' bottom line.
Compares and contrasts tools for rating indoor environment: NABERS, Green Star Performance and Well Building Standard.
ARCADIS is an expert environmental, engineering and consulting firm that provides services including:
- Advice and guidance on environmental permits, regulations and sustainable solutions
- Engineering services such as feasibility studies, design, construction management and maintenance
- Project management for a wide range of building and infrastructure projects
- Consultancy on sustainable construction techniques and certification standards
- Support for clients in various sectors on issues like REACH implementation, energy efficiency, and permitting renewals
This document summarizes an environmental impact assessment case study of a fertilizer plant project in Saskatchewan, Canada. It describes the project details, including location, utilities, waste disposal, and rationale. It then assesses some limitations of the case study, noting that impacted study area boundaries were unclear, alternatives to the proposed project and chemical fertilizer use were not properly evaluated, and cumulative impacts and sustainability were not addressed. The document concludes that the environmental impact statement had a narrow project focus and did not fully consider policy alternatives or long-term sustainability.
This document contains the resume of Mallikarjun S.D, an Indian citizen who holds an M.Tech in Environmental Engineering. He has over 9 years of experience in areas like air quality monitoring, water treatment, waste water treatment, and environmental impact assessment. He is currently working as an Environment Engineer at Vasavadatta Cements Sedam, where his responsibilities include ensuring regulatory compliance and maintaining pollution control systems. Prior to this, he has worked as a faculty member and consulting engineer in Ethiopia, and as a project coordinator for a construction company in India. He has expertise in areas like stack monitoring, water technology, quality control systems, and concrete construction.
This document provides a summary of a post impact assessment report for Nestle's tri-generation power plant. The report includes chapters on plant description, environmental impacts, mitigation measures, and environmental management plan. Key findings are that the power plant is expected to reduce greenhouse gas emissions and improve electricity supply stability. Impacts on air and water quality are assessed, along with waste generation and management. The study was conducted over two months to evaluate the plant's environmental performance and compliance with regulations.
This document provides a summary of the quarter 1 impact mitigation monitoring report for Nestle Waters Greenfield Factory project in Abaji, FCT Abuja, Nigeria. Key points include:
- Air, water, soil and vegetation were sampled from 9 stations to monitor impacts from construction activities and compliance with standards.
- Air quality, noise levels, water quality and soil quality were found to be within standards except for slightly elevated levels of some parameters near construction areas.
- Vegetation and wildlife have been impacted by land clearing for construction but mitigation measures like replanting and fencing are being implemented.
- Socioeconomic impacts are being mitigated through compensation, local employment, and consultations
Liz Marble has over 16 years of experience in environmental, health and safety management in both the public and private sectors. She has served as an EHS Manager and Environmental Engineer for companies including Eramet Marietta, GE Energy, and the University of Missouri-Columbia. Her experience includes managing environmental compliance programs, permits, audits, emergency response and hazardous waste. She is a Certified Hazardous Materials Manager and holds additional certifications in asbestos inspection, radiation safety and first aid.
Nadjia LaFontaine has over 15 years of experience in project management and environmental engineering. She has worked at Ingredion Canada for over 15 years in various roles including process engineer, environmental engineer, and network administrator. She has extensive experience with regulatory compliance, environmental reporting, budgeting, and leading projects from concept to completion valued at up to $2.5 million. Currently she works independently on various construction and agricultural projects while seeking new employment opportunities to utilize her engineering and management experience.
Australian indoor environment rating tools, and the future of building health...Michael Taranto
Presentation to AIRAH 2016 - The Future of HVAC
By Joe Scholz and Mark Graham, QED Environmental Services
Explains the link between indoor environment and productivity of office building occupants, and how this impacts tenants' bottom line.
Compares and contrasts tools for rating indoor environment: NABERS, Green Star Performance and Well Building Standard.
ARCADIS is an expert environmental, engineering and consulting firm that provides services including:
- Advice and guidance on environmental permits, regulations and sustainable solutions
- Engineering services such as feasibility studies, design, construction management and maintenance
- Project management for a wide range of building and infrastructure projects
- Consultancy on sustainable construction techniques and certification standards
- Support for clients in various sectors on issues like REACH implementation, energy efficiency, and permitting renewals
This document summarizes an environmental impact assessment case study of a fertilizer plant project in Saskatchewan, Canada. It describes the project details, including location, utilities, waste disposal, and rationale. It then assesses some limitations of the case study, noting that impacted study area boundaries were unclear, alternatives to the proposed project and chemical fertilizer use were not properly evaluated, and cumulative impacts and sustainability were not addressed. The document concludes that the environmental impact statement had a narrow project focus and did not fully consider policy alternatives or long-term sustainability.
Scott B. Shepherd has over 20 years of experience in environmental health and safety management, with expertise in petroleum, oils, water, wastewater, and chlorine. He has worked as an environmental health and safety manager and engineer for several companies in Afghanistan and the United States, developing safety programs, performing site assessments and risk management, managing hazardous waste operations, and ensuring regulatory compliance. He has a Bachelor of Science in biological and agricultural engineering and several safety certifications.
The document discusses environmental aspects and impacts. An environmental aspect is an element of an organization's activities, products or services that can impact the environment, like chemical waste. Impacts are the consequences of aspects, like water pollution. The organization must identify and evaluate all actual and potential aspects, and determine which have significant impacts. Aspects can be direct, like on-site waste, or indirect, like how suppliers manage waste. The organization must consider all aspects within its control or influence.
The EPA office in Seattle underwent renovations to receive LEED Gold certification, serving as a model for sustainability. Open floor plans allow more natural light while encouraging employee communication. Reused and environmentally friendly materials reduce environmental impacts. A new server room design uses outside air for cooling, cutting energy usage by an estimated 47% over 10 years.
Methodology for Developing Criteria weights for Green Building Rating Tool Fo...IRJET Journal
This document presents a methodology for developing criteria weights for a green building rating tool tailored for Gujarat State in India. It discusses existing green building rating systems like GRIHA and LEED used in India, noting they may not be fully suitable for different regional conditions. The methodology uses the Analytic Hierarchy Process (AHP) to determine weights for criteria in the new rating tool based on their relative importance for Gujarat. This will help account for the state's unique climate, geography and building practices.
The document provides an overview of environmental impact assessments (EIAs). It discusses that EIAs ensure environmental factors are considered early in project planning and considers impacts on local communities and biodiversity. The EIA process involves screening projects, conducting initial environmental examinations and scoping, performing the full EIA and oversight, decision making, monitoring, and evaluation. Projects requiring EIAs are those likely to significantly impact the environment due to their nature, size or location. EIAs identify direct and indirect environmental effects and are intended to prevent or minimize adverse impacts and enhance project quality.
This document summarizes a LEED building presentation about the Saint Louis Art Museum expansion project. It discusses what LEED is, the benefits of LEED certification, and provides details about the specific LEED credits and strategies used for the museum expansion project. The expansion achieved LEED certification under the LEED for New Construction version 2.2 rating system. Key credits addressed include using renewable energy, regional materials, efficient water use for landscaping, underground parking to reduce heat island effect, and a daylighting system to filter and distribute indirect natural light throughout the galleries.
The document provides information on identifying environmental aspects and determining their significance according to ISO 14001. It defines key terms like environment, environmental aspects, and environmental impacts. It lists examples of aspects like energy and water consumption, chemical usage, waste generation, and product impacts. The document describes the process of identifying all activities, products and services and their related inputs and outputs. It provides qualitative and quantitative methods for analyzing the aspects and determining their significance based on environmental and compliance criteria. It emphasizes involving cross-functional teams and adapting examples to an organization's specific needs and procedures.
Environmental impact assessment (EIA)
In India any person who desires to undertake any new project or the expansion or modernization of any existing industry or project should submit a Rapid Environmental Impact Assessment report along with application to the secretary, Ministry of Environment and Forests (MoEF), New Delhi. Basic types of EIA being practiced are given below.
Rapid Environmental Impact Assessment (REIA)
Comprehensive Environmental Impact Assessment (CEIA)
Strategic Environmental Impact Assessment (SEIA)
Sectoral Environment Impact Assessment
Regional Environmental Impact Assessment
Environmental Impact Assessment Notification in India
EIA is of comparatively recent origin in India and has become an integral part of Environmental Management by EIA notification of 1994 and its subsequent amendments by Ministry of Environment & Forests (MoEF), Govt. of India. The notification specifies 30 categories of projects with potential risks to degrade the Environment.
Purposes of EIA
EIA is a process with several important purposes, which can be categorized as follows:
To facilitate decision-making For the decision-maker, for example the local authority, it provides a systematic examination of the environmental implications of a proposed action, and sometimes alternatives, before a decision is taken
To aid in the formation of development EIA can be of great benefit to them, since it can provide a framework for considering location and design issues and environmental issues in parallel. It can be an aid to the formulation of developmental actions, indicating areas where the project can be modified to minimize or eliminate altogether the adverse impacts on the environment.
To be an instrument for sustainable development The key characteristics of sustainable development include maintaining the overall quality of life, maintaining continuing access to natural resources and avoiding lasting environmental damage.
Principle of EIA
The Benefits of Environmental Assessment
Categorization of projects and activities
Environmental Clearance (EC)
leed, rating system, green designs, sustainability, green concept, different rating systems of leed, manitoba hydro place, leadership in energy and environmental design, comparison between leed and other rating system , leed india
The document discusses environmental impact assessment and monitoring services provided by CPTL Envirotech Designers & Pollution Control. It summarizes the organizational profile, services including air, water, noise monitoring and environmental impact assessment. It then discusses a project undertaken for Vardhaman Adarsh Ispat Pvt Ltd, including components of Form 1 and prefeasibility report required as per GOI notification to apply for environmental clearance for the proposed expansion project.
Atta Ur Rehman is a senior chemical engineering professional with over 8 years of experience in process engineering, process safety management, and quality assurance. He has expertise in areas such as process design, hazard analysis, instrumentation and controls, project management, and cost reduction techniques. Currently seeking opportunities in the oil and gas, chemicals, or fertilizers industries with a location preference for the Middle East.
Certifcation of Building Using GRIHA Rating SystemSandeep Jain
The document is a presentation on the GRIHA rating system for the LT & Academic Complex building at IIT Delhi. It provides details of the building project and outlines the GRIHA criteria used to evaluate the building's sustainable features. It describes aspects like site planning, water and energy management, waste management, and materials used. It indicates the building scored 84 points out of 100 to achieve a 4-star GRIHA rating, recognizing its efforts in optimizing resource use, minimizing ecological impact and incorporating sustainable practices in line with GRIHA standards.
Sự kiện là buổi thứ 10 trong khuôn khổ chuỗi đào tạo online về Công trình xanh do VGBC tổ chức.
Thiết kế và xây dựng công trình xanh, về bản chất, là một quá trình tối ưu hóa: tối ưu hóa nguồn lực, nguồn ngân sách, nguồn tài nguyên thiên nhiên, để đạt được những kết quả tối ưu về hiệu năng, chất lượng không gian sống và bảo vệ môi trường tự nhiên. Tuy nhiên, khi quá trình tối ưu hóa, nếu có, diễn ra một cách biệt lập ở từng hệ thống riêng biệt, thì sẽ vướng phải thách thức về ngân sách: muốn hiệu năng càng cao, thì chi phí đầu tư càng cao. Điều này đúng cho dù bạn muốn nâng cao hiệu năng của hệ thống HVAC, hệ thống chiếu sáng, khả năng cách nhiệt của vật liệu… Để vượt qua thách thức này, quá trình tối ưu hóa phải được tích hợp ngay từ đầu của quá trình lên ý tưởng và thiết kế sơ bộ, thiết kế cơ sở. Điều đó dẫn đến yêu cầu trao đổi thông tin và phối hợp chặt chẽ ngay từ giai đoạn đầu của quá trình thiết kế giữa KTS với các kỹ sư, thậm chí nếu có điều kiện, giữa đội thiết kế và nhà thầu, giữa đội dự án và đơn vị dự kiến vận hành, quản lý công trình …
Như vậy để đạt được mục tiêu về hiệu năng và ngân sách cho công trình xanh, quá trình quản lý dự án và phối hợp, làm việc giữa các thành viên đội dự án sẽ ít nhiều cần có sự thay đổi so với cách làm “đường một chiều” truyền thống.
This report summarizes the environmental impact assessment of Tanjin Printing and Packing Ltd in Bangladesh. The company manufactures printing and packaging products from raw materials like paper, plastics, and chemicals. While the company provides jobs and recycles waste, it also impacts the environment through air and water pollution. The report identifies pollution sources and provides recommendations to strengthen management and monitoring to reduce negative impacts on the environment.
Mike Lawson has over 30 years of experience in environmental investigation, remediation, and engineering. He has extensive project management experience developing budgets, schedules, and overseeing projects. His technical expertise includes soil and groundwater remediation system design, hazardous waste management, and regulatory compliance. He holds a B.S. in Chemical Engineering and professional engineering license in California.
A Short introduction over what EIA is , its objectives , its process , advantages and challenges in india.
Also two case studies, one where EIA is implented, and other where it isnt, have been included along with the references.
Presentation given at the 2014 BuildingChicago - Greening the Heartland conference by Judi Cooper, Shanna Olson, Carey Nagle, and Scott Bowman. Using the Iowa Utility Board / Office of Consumer Advocate as a case study, the group demonstrates the power of the integrated design process as a tool to reach extremely high performance (and extremely low energy use) in buildings.
The document discusses strategies for achieving Materials and Resources (MR) credits in green building certification programs like LOTUS. It covers prerequisites and credits related to construction waste management, sustainable materials selection, reduced concrete use, and operational waste management. Key topics include developing waste management plans, diverting waste from landfills, using recycled, reusable, and rapidly renewable materials, sourcing certified wood, performing life cycle assessments, and providing dedicated recycling areas or sorting facilities.
Code Dread: Keeping up with ASHRAE and LEEDScott Bowman
Design firms will be in the best position to meet their clients’ needs by understanding and preparing for ASHRAE 90.1-2010 and LEED v4, both of which have evolved from their earlier versions and will have major impacts on buildings in the very near future.
This presentation will illustrate the effect of these changes by applying the new standards to an existing LEED Silver-certified project constructed in 2008 by KJWW Engineering Consultants using ASHRAE 90.1-2004.
First, a new baseline using the ASHRAE 90.1-2007 standard will be applied to the project, which is the requirement under LEED v2009. Next, a baseline for the project using ASHRAE 90.1-2010 will be applied to the project, which represents the requirements under LEED v4. Both comparisons will show the decrease in energy savings, points awarded, and strategies and cost required to bring the project back to the original energy savings and the LEED certification it might attain.
The project’s real-life, existing energy performance will be presented as an overlay to all of the comparisons.
Dokumen tersebut berisi kisi-kisi soal ujian nasional untuk kompetensi keahlian teknik pemesinan. Terdapat 16 standar kompetensi yang akan diuji meliputi prinsip mekanika, kelistrikan, perlakuan logam, keselamatan kerja, penggunaan alat ukur dan perkakas, pembacaan gambar teknik, pengoperasian berbagai mesin seperti bubut, frais dan gerinda, serta pemograman mesin CNC.
Scott B. Shepherd has over 20 years of experience in environmental health and safety management, with expertise in petroleum, oils, water, wastewater, and chlorine. He has worked as an environmental health and safety manager and engineer for several companies in Afghanistan and the United States, developing safety programs, performing site assessments and risk management, managing hazardous waste operations, and ensuring regulatory compliance. He has a Bachelor of Science in biological and agricultural engineering and several safety certifications.
The document discusses environmental aspects and impacts. An environmental aspect is an element of an organization's activities, products or services that can impact the environment, like chemical waste. Impacts are the consequences of aspects, like water pollution. The organization must identify and evaluate all actual and potential aspects, and determine which have significant impacts. Aspects can be direct, like on-site waste, or indirect, like how suppliers manage waste. The organization must consider all aspects within its control or influence.
The EPA office in Seattle underwent renovations to receive LEED Gold certification, serving as a model for sustainability. Open floor plans allow more natural light while encouraging employee communication. Reused and environmentally friendly materials reduce environmental impacts. A new server room design uses outside air for cooling, cutting energy usage by an estimated 47% over 10 years.
Methodology for Developing Criteria weights for Green Building Rating Tool Fo...IRJET Journal
This document presents a methodology for developing criteria weights for a green building rating tool tailored for Gujarat State in India. It discusses existing green building rating systems like GRIHA and LEED used in India, noting they may not be fully suitable for different regional conditions. The methodology uses the Analytic Hierarchy Process (AHP) to determine weights for criteria in the new rating tool based on their relative importance for Gujarat. This will help account for the state's unique climate, geography and building practices.
The document provides an overview of environmental impact assessments (EIAs). It discusses that EIAs ensure environmental factors are considered early in project planning and considers impacts on local communities and biodiversity. The EIA process involves screening projects, conducting initial environmental examinations and scoping, performing the full EIA and oversight, decision making, monitoring, and evaluation. Projects requiring EIAs are those likely to significantly impact the environment due to their nature, size or location. EIAs identify direct and indirect environmental effects and are intended to prevent or minimize adverse impacts and enhance project quality.
This document summarizes a LEED building presentation about the Saint Louis Art Museum expansion project. It discusses what LEED is, the benefits of LEED certification, and provides details about the specific LEED credits and strategies used for the museum expansion project. The expansion achieved LEED certification under the LEED for New Construction version 2.2 rating system. Key credits addressed include using renewable energy, regional materials, efficient water use for landscaping, underground parking to reduce heat island effect, and a daylighting system to filter and distribute indirect natural light throughout the galleries.
The document provides information on identifying environmental aspects and determining their significance according to ISO 14001. It defines key terms like environment, environmental aspects, and environmental impacts. It lists examples of aspects like energy and water consumption, chemical usage, waste generation, and product impacts. The document describes the process of identifying all activities, products and services and their related inputs and outputs. It provides qualitative and quantitative methods for analyzing the aspects and determining their significance based on environmental and compliance criteria. It emphasizes involving cross-functional teams and adapting examples to an organization's specific needs and procedures.
Environmental impact assessment (EIA)
In India any person who desires to undertake any new project or the expansion or modernization of any existing industry or project should submit a Rapid Environmental Impact Assessment report along with application to the secretary, Ministry of Environment and Forests (MoEF), New Delhi. Basic types of EIA being practiced are given below.
Rapid Environmental Impact Assessment (REIA)
Comprehensive Environmental Impact Assessment (CEIA)
Strategic Environmental Impact Assessment (SEIA)
Sectoral Environment Impact Assessment
Regional Environmental Impact Assessment
Environmental Impact Assessment Notification in India
EIA is of comparatively recent origin in India and has become an integral part of Environmental Management by EIA notification of 1994 and its subsequent amendments by Ministry of Environment & Forests (MoEF), Govt. of India. The notification specifies 30 categories of projects with potential risks to degrade the Environment.
Purposes of EIA
EIA is a process with several important purposes, which can be categorized as follows:
To facilitate decision-making For the decision-maker, for example the local authority, it provides a systematic examination of the environmental implications of a proposed action, and sometimes alternatives, before a decision is taken
To aid in the formation of development EIA can be of great benefit to them, since it can provide a framework for considering location and design issues and environmental issues in parallel. It can be an aid to the formulation of developmental actions, indicating areas where the project can be modified to minimize or eliminate altogether the adverse impacts on the environment.
To be an instrument for sustainable development The key characteristics of sustainable development include maintaining the overall quality of life, maintaining continuing access to natural resources and avoiding lasting environmental damage.
Principle of EIA
The Benefits of Environmental Assessment
Categorization of projects and activities
Environmental Clearance (EC)
leed, rating system, green designs, sustainability, green concept, different rating systems of leed, manitoba hydro place, leadership in energy and environmental design, comparison between leed and other rating system , leed india
The document discusses environmental impact assessment and monitoring services provided by CPTL Envirotech Designers & Pollution Control. It summarizes the organizational profile, services including air, water, noise monitoring and environmental impact assessment. It then discusses a project undertaken for Vardhaman Adarsh Ispat Pvt Ltd, including components of Form 1 and prefeasibility report required as per GOI notification to apply for environmental clearance for the proposed expansion project.
Atta Ur Rehman is a senior chemical engineering professional with over 8 years of experience in process engineering, process safety management, and quality assurance. He has expertise in areas such as process design, hazard analysis, instrumentation and controls, project management, and cost reduction techniques. Currently seeking opportunities in the oil and gas, chemicals, or fertilizers industries with a location preference for the Middle East.
Certifcation of Building Using GRIHA Rating SystemSandeep Jain
The document is a presentation on the GRIHA rating system for the LT & Academic Complex building at IIT Delhi. It provides details of the building project and outlines the GRIHA criteria used to evaluate the building's sustainable features. It describes aspects like site planning, water and energy management, waste management, and materials used. It indicates the building scored 84 points out of 100 to achieve a 4-star GRIHA rating, recognizing its efforts in optimizing resource use, minimizing ecological impact and incorporating sustainable practices in line with GRIHA standards.
Sự kiện là buổi thứ 10 trong khuôn khổ chuỗi đào tạo online về Công trình xanh do VGBC tổ chức.
Thiết kế và xây dựng công trình xanh, về bản chất, là một quá trình tối ưu hóa: tối ưu hóa nguồn lực, nguồn ngân sách, nguồn tài nguyên thiên nhiên, để đạt được những kết quả tối ưu về hiệu năng, chất lượng không gian sống và bảo vệ môi trường tự nhiên. Tuy nhiên, khi quá trình tối ưu hóa, nếu có, diễn ra một cách biệt lập ở từng hệ thống riêng biệt, thì sẽ vướng phải thách thức về ngân sách: muốn hiệu năng càng cao, thì chi phí đầu tư càng cao. Điều này đúng cho dù bạn muốn nâng cao hiệu năng của hệ thống HVAC, hệ thống chiếu sáng, khả năng cách nhiệt của vật liệu… Để vượt qua thách thức này, quá trình tối ưu hóa phải được tích hợp ngay từ đầu của quá trình lên ý tưởng và thiết kế sơ bộ, thiết kế cơ sở. Điều đó dẫn đến yêu cầu trao đổi thông tin và phối hợp chặt chẽ ngay từ giai đoạn đầu của quá trình thiết kế giữa KTS với các kỹ sư, thậm chí nếu có điều kiện, giữa đội thiết kế và nhà thầu, giữa đội dự án và đơn vị dự kiến vận hành, quản lý công trình …
Như vậy để đạt được mục tiêu về hiệu năng và ngân sách cho công trình xanh, quá trình quản lý dự án và phối hợp, làm việc giữa các thành viên đội dự án sẽ ít nhiều cần có sự thay đổi so với cách làm “đường một chiều” truyền thống.
This report summarizes the environmental impact assessment of Tanjin Printing and Packing Ltd in Bangladesh. The company manufactures printing and packaging products from raw materials like paper, plastics, and chemicals. While the company provides jobs and recycles waste, it also impacts the environment through air and water pollution. The report identifies pollution sources and provides recommendations to strengthen management and monitoring to reduce negative impacts on the environment.
Mike Lawson has over 30 years of experience in environmental investigation, remediation, and engineering. He has extensive project management experience developing budgets, schedules, and overseeing projects. His technical expertise includes soil and groundwater remediation system design, hazardous waste management, and regulatory compliance. He holds a B.S. in Chemical Engineering and professional engineering license in California.
A Short introduction over what EIA is , its objectives , its process , advantages and challenges in india.
Also two case studies, one where EIA is implented, and other where it isnt, have been included along with the references.
Presentation given at the 2014 BuildingChicago - Greening the Heartland conference by Judi Cooper, Shanna Olson, Carey Nagle, and Scott Bowman. Using the Iowa Utility Board / Office of Consumer Advocate as a case study, the group demonstrates the power of the integrated design process as a tool to reach extremely high performance (and extremely low energy use) in buildings.
The document discusses strategies for achieving Materials and Resources (MR) credits in green building certification programs like LOTUS. It covers prerequisites and credits related to construction waste management, sustainable materials selection, reduced concrete use, and operational waste management. Key topics include developing waste management plans, diverting waste from landfills, using recycled, reusable, and rapidly renewable materials, sourcing certified wood, performing life cycle assessments, and providing dedicated recycling areas or sorting facilities.
Code Dread: Keeping up with ASHRAE and LEEDScott Bowman
Design firms will be in the best position to meet their clients’ needs by understanding and preparing for ASHRAE 90.1-2010 and LEED v4, both of which have evolved from their earlier versions and will have major impacts on buildings in the very near future.
This presentation will illustrate the effect of these changes by applying the new standards to an existing LEED Silver-certified project constructed in 2008 by KJWW Engineering Consultants using ASHRAE 90.1-2004.
First, a new baseline using the ASHRAE 90.1-2007 standard will be applied to the project, which is the requirement under LEED v2009. Next, a baseline for the project using ASHRAE 90.1-2010 will be applied to the project, which represents the requirements under LEED v4. Both comparisons will show the decrease in energy savings, points awarded, and strategies and cost required to bring the project back to the original energy savings and the LEED certification it might attain.
The project’s real-life, existing energy performance will be presented as an overlay to all of the comparisons.
Dokumen tersebut berisi kisi-kisi soal ujian nasional untuk kompetensi keahlian teknik pemesinan. Terdapat 16 standar kompetensi yang akan diuji meliputi prinsip mekanika, kelistrikan, perlakuan logam, keselamatan kerja, penggunaan alat ukur dan perkakas, pembacaan gambar teknik, pengoperasian berbagai mesin seperti bubut, frais dan gerinda, serta pemograman mesin CNC.
Mansoor Ahmad Rather is seeking a professional goal of achieving optimum heights in an organization with utmost dedication and sincerity. He has a 1 year diploma in computer applications and a B.A from Kashmir University. His work experience includes working as a computer operator at CRK Constructions in MirGundPattan Baramullah. He highlights strengths such as being result-oriented, having strong ethics and interpersonal skills.
Lismore City Council in Australia partnered with Certified Organic Solutions to achieve organic certification for compost made from kerbside food and garden waste collection, a first for any local council in Australia. Through education programs for residents, screening processes, and stringent testing, the compost met organic certification standards. This allows certified organic producers in the region to purchase certified organic compost, supporting the local organic industry and environment. The model developed could be adopted by other local councils to create new income streams and support organic growers.
Skripsi ini menilai risiko kecelakaan kerja pekerja angkut kapal di Kabupaten Sukamara dengan menggunakan metode HIRA untuk mengidentifikasi bahaya dan menilai tingkat risiko terhadap pekerja, peralatan, bahan yang diangkut, proses kerja, dan limbah. Penelitian deskriptif menunjukkan tingkat risiko kecelakaan kerja buruh angkut kapal berkisar antara rendah hingga sedang.
The document outlines an eTwinning project on water between schools in several European countries. The project's objectives are to:
1) Develop a cross-curricular project on water from different perspectives.
2) Develop critical thinking skills and use English as a lingua franca.
3) Gain skills in using ICT tools like Google Docs, PowerPoint, videos, and social media to collaborate.
THIS PRESENTATION IS ABOUT Historical monuments MADE BY D.S.ASHWIN ABOUT MORE THAN 11 MONUMENTS AND A AV FOR BETTER UNDERSTANDING ( especially for children please if any suggestion to slideshareashwin@yahoo.com
ENJOY OUR SERVICE
Nicotine is a highly addictive drug found in tobacco products. Smoking causes both short-term effects like increased heart rate and long-term health risks like cancer, emphysema, and heart disease. Secondhand smoke also endangers nonsmokers by increasing their risk of lung cancer and respiratory illnesses. Smoking during pregnancy can lead to miscarriage, premature birth, and learning difficulties in children. Tobacco use places financial burdens on both families and society through increased medical costs and lost wages. Withdrawal symptoms occur when dependent smokers try to quit.
Riaan Swemmer is an environmental consultant and manager at Digby Wells Environmental. He oversees the Environmental Management Services Unit and has over 10 years of experience conducting environmental impact assessments, compiling management plans and licenses, and advising clients in mining, renewable energy, and other sectors. He holds an MSc in Zoology with a focus on aquatic health.
Ecocentra is an environmental consultancy firm based in Beirut that provides services related to environmental management, planning, transactions, sustainability, and international development. It aims to ensure environmental accountability and sustainability. Ecocentra utilizes expertise in local conditions, regulations, and best practices. It has experience working with international organizations on projects in sectors like infrastructure, transportation, and mining.
The document outlines the duties and responsibilities of an Environmental Safeguard Specialist position for a World Bank funded urban water sector reform project in Ekiti State, Nigeria. The specialist will identify areas where World Bank environmental and social safeguard policies apply due to issues like resettlement and work to ensure the project complies with these policies. They will monitor environmental and social impact assessments, manage an environmental and social management department, and facilitate audits to ensure compliance with plans during project implementation. The specialist will also prepare reports, participate in World Bank missions, and ensure diligent compliance with environmental guidelines.
Yashwant Kumar Pandey has over 10 years of experience in designing, operating, and evaluating wastewater treatment systems. He has worked on projects in India as well as other countries like Sri Lanka and the Philippines. Currently he works as the Head of Wastewater at Raindrops Water Technologies, where he is responsible for business development, project design and execution, and training engineers and operators.
Naresh Kumar Katakam is a civil and environmental engineer with over 10 years of experience in construction management, infrastructure projects, and environmental engineering. He holds an M.Tech in Environmental Engineering from IIT Kharagpur and a BE in Civil Engineering. He is currently a Senior Manager of HSE at Adani Ports, where he oversees environmental functions and projects across multiple locations. Prior to this, he held positions managing projects, HSE functions, and obtaining environmental clearances for various organizations. He has extensive experience in areas such as construction, tendering, quality control, safety management, and environmental impact assessment.
Sagar Shreeram Apte is seeking a career opportunity as a water or wastewater treatment engineer with experience designing cost-effective pollution treatment schemes. He has over 7 years of experience designing wastewater treatment systems for various industries. He has an M.Tech in Environmental Science and Technology and is skilled in designing complete water treatment systems, wastewater treatment schemes, and advising on pollution control measures.
-Project professionals: Ready for the future? Climate change, Leigh WoodcockAPMDonotuse
The APM South Wales and West of England Branch held yet another fantastic conference on 18 October 2023.
Speaker: Leigh Woodcock
In 2023, we as project professionals face a world of increasing uncertainty, with political and market conflicts, the continued impacts of COVID-19, and the climate crisis influencing the world we operate in. At the same time, domestic and international sustainability goals, diversity and inclusion targets and new, collaborative technologies are guiding us to build a better future. As a community, how can we ensure we’re ready?
Join us at the APM’s South Wales & West of England branch’s 2023 Conference to explore the ways in which our landscape is changing, and how we as project professionals can stay at the forefront of this ever-evolving world.
Daniel Mutua has over 30 years of experience in various roles related to oil, gas, and mining industries. He holds multiple degrees including a PhD in Petroleum Engineering and masters degrees in public health and accounting. His experience includes project management, research, teaching, and leadership roles. He has strong skills in areas like project management, communication, problem solving, and computer training.
Malek Nabil Al-Khateeb is a Jordanian chemical engineer with over 8 years of experience in water and wastewater management. He currently works as the Utility Manager for Jordan Projects for Tourism Development - Talabay, where he oversees operations of water, wastewater, energy and landscaping units. Previously he has worked as a Process Engineer for Arab Potash Company and as an Operation & Safety Engineer for Aqaba Water Company. He holds a BSC in Chemical Engineering from Jordan University of Science and Technology.
A.Lakshmi Narayanan has over 23 years of experience in environmental management and research. He holds advanced degrees in environmental science and energy studies. His experience includes implementing environmental management systems, conducting environmental impact assessments, and monitoring industrial environmental performance. Currently he works as an environment expert for Delhi Metro Rail Corporation, monitoring contractor compliance on safety, health, and environmental issues.
161201_CV CPelekani_updated November 2016Pelekani Con
This document provides a summary of Con Pelekani's career and qualifications. It outlines his extensive experience in water treatment engineering, including roles managing water treatment optimization and strategic planning. It also details his educational background, including a Ph.D. in Environmental Engineering and publications/reports authored. Pelekani has nearly 25 years of experience in water treatment and desalination projects, with a focus on process design, optimization, and research & development.
This document summarizes an abstract seminar on wastewater treatment presented by students from Aurora's Technological Research and Institute. The seminar discusses the objectives of treating wastewater, which include improving water quality, eliminating pollutants, and making wastewater reusable. It provides an introduction to the mini project, which involves studying the processes for wastewater treatment. The status of the project is that the team has just visited the treatment site. Over the next few weeks, the team will learn about and study the seven key processes involved in wastewater treatment.
Sanaz Sarafraz is seeking an engineering position utilizing her project management and analytical skills. She has experience designing engineering plans, formulating technical reports, and working on water engineering projects. Her background includes work as a volunteer civil engineer for the City of San Diego developing water infrastructure designs and studies, as a water and wastewater engineer for Bauer International Corp preparing technical designs and reports, and as a water and wastewater engineer in Iran developing technical criteria and guidelines.
Richie Paddick has over 15 years of experience managing facilities maintenance and infrastructure projects in the mining industry. He has extensive experience designing, maintaining, and managing water, sanitation and drainage systems. As a project manager, he has experience developing project scopes, managing budgets and schedules, and ensuring regulatory compliance. He currently works as a project manager and has previously held roles as a superintendent and supervisor overseeing maintenance operations and village infrastructure at various mining sites.
This document provides an organization profile for SPANS Envirotech Pvt. Ltd., an environmental consulting firm. It includes information on the company's background and services related to water, wastewater, and pollution control engineering. A list of selected projects designed and managed by the company's key personnel is also included.
This CV is for Anselm Jacobs, who has over 45 years of experience in process engineering for water and wastewater treatment. He has held various roles including process engineer, commissioning engineer, senior process engineer, and principal process engineer. He has extensive experience managing projects, developing innovative solutions, and providing technical expertise to water companies. He possesses multiple qualifications in relevant fields and has a proven track record of successful sales, management, and technical work.
Understanding Inductive Bias in Machine LearningSUTEJAS
This presentation explores the concept of inductive bias in machine learning. It explains how algorithms come with built-in assumptions and preferences that guide the learning process. You'll learn about the different types of inductive bias and how they can impact the performance and generalizability of machine learning models.
The presentation also covers the positive and negative aspects of inductive bias, along with strategies for mitigating potential drawbacks. We'll explore examples of how bias manifests in algorithms like neural networks and decision trees.
By understanding inductive bias, you can gain valuable insights into how machine learning models work and make informed decisions when building and deploying them.
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMSIJNSA Journal
The smart irrigation system represents an innovative approach to optimize water usage in agricultural and landscaping practices. The integration of cutting-edge technologies, including sensors, actuators, and data analysis, empowers this system to provide accurate monitoring and control of irrigation processes by leveraging real-time environmental conditions. The main objective of a smart irrigation system is to optimize water efficiency, minimize expenses, and foster the adoption of sustainable water management methods. This paper conducts a systematic risk assessment by exploring the key components/assets and their functionalities in the smart irrigation system. The crucial role of sensors in gathering data on soil moisture, weather patterns, and plant well-being is emphasized in this system. These sensors enable intelligent decision-making in irrigation scheduling and water distribution, leading to enhanced water efficiency and sustainable water management practices. Actuators enable automated control of irrigation devices, ensuring precise and targeted water delivery to plants. Additionally, the paper addresses the potential threat and vulnerabilities associated with smart irrigation systems. It discusses limitations of the system, such as power constraints and computational capabilities, and calculates the potential security risks. The paper suggests possible risk treatment methods for effective secure system operation. In conclusion, the paper emphasizes the significant benefits of implementing smart irrigation systems, including improved water conservation, increased crop yield, and reduced environmental impact. Additionally, based on the security analysis conducted, the paper recommends the implementation of countermeasures and security approaches to address vulnerabilities and ensure the integrity and reliability of the system. By incorporating these measures, smart irrigation technology can revolutionize water management practices in agriculture, promoting sustainability, resource efficiency, and safeguarding against potential security threats.
International Conference on NLP, Artificial Intelligence, Machine Learning an...gerogepatton
International Conference on NLP, Artificial Intelligence, Machine Learning and Applications (NLAIM 2024) offers a premier global platform for exchanging insights and findings in the theory, methodology, and applications of NLP, Artificial Intelligence, Machine Learning, and their applications. The conference seeks substantial contributions across all key domains of NLP, Artificial Intelligence, Machine Learning, and their practical applications, aiming to foster both theoretical advancements and real-world implementations. With a focus on facilitating collaboration between researchers and practitioners from academia and industry, the conference serves as a nexus for sharing the latest developments in the field.
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...University of Maribor
Slides from talk presenting:
Aleš Zamuda: Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapter and Networking.
Presentation at IcETRAN 2024 session:
"Inter-Society Networking Panel GRSS/MTT-S/CIS
Panel Session: Promoting Connection and Cooperation"
IEEE Slovenia GRSS
IEEE Serbia and Montenegro MTT-S
IEEE Slovenia CIS
11TH INTERNATIONAL CONFERENCE ON ELECTRICAL, ELECTRONIC AND COMPUTING ENGINEERING
3-6 June 2024, Niš, Serbia
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressionsVictor Morales
K8sGPT is a tool that analyzes and diagnoses Kubernetes clusters. This presentation was used to share the requirements and dependencies to deploy K8sGPT in a local environment.
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
ACEP Magazine edition 4th launched on 05.06.2024Rahul
This document provides information about the third edition of the magazine "Sthapatya" published by the Association of Civil Engineers (Practicing) Aurangabad. It includes messages from current and past presidents of ACEP, memories and photos from past ACEP events, information on life time achievement awards given by ACEP, and a technical article on concrete maintenance, repairs and strengthening. The document highlights activities of ACEP and provides a technical educational article for members.
A review on techniques and modelling methodologies used for checking electrom...nooriasukmaningtyas
The proper function of the integrated circuit (IC) in an inhibiting electromagnetic environment has always been a serious concern throughout the decades of revolution in the world of electronics, from disjunct devices to today’s integrated circuit technology, where billions of transistors are combined on a single chip. The automotive industry and smart vehicles in particular, are confronting design issues such as being prone to electromagnetic interference (EMI). Electronic control devices calculate incorrect outputs because of EMI and sensors give misleading values which can prove fatal in case of automotives. In this paper, the authors have non exhaustively tried to review research work concerned with the investigation of EMI in ICs and prediction of this EMI using various modelling methodologies and measurement setups.
Batteries -Introduction – Types of Batteries – discharging and charging of battery - characteristics of battery –battery rating- various tests on battery- – Primary battery: silver button cell- Secondary battery :Ni-Cd battery-modern battery: lithium ion battery-maintenance of batteries-choices of batteries for electric vehicle applications.
Fuel Cells: Introduction- importance and classification of fuel cells - description, principle, components, applications of fuel cells: H2-O2 fuel cell, alkaline fuel cell, molten carbonate fuel cell and direct methanol fuel cells.
Introduction- e - waste – definition - sources of e-waste– hazardous substances in e-waste - effects of e-waste on environment and human health- need for e-waste management– e-waste handling rules - waste minimization techniques for managing e-waste – recycling of e-waste - disposal treatment methods of e- waste – mechanism of extraction of precious metal from leaching solution-global Scenario of E-waste – E-waste in India- case studies.
1. Muhammad Pahore
326/149 Nelson Street, Auckland Central, Auckland
M: 021 1067386
Email: stranger.muhammad@gmail.com
Career Objective
Currently seeking an Environmental Engineering role at consultancy firm where I can utilise my 13 year
experience in water and wastewater engineering, environmental monitoring and assessment,
environmental impact assessment, solid waste management.
Key Skills and Experience
Water and Wastewater Treatment
• Design of water and wastewater treatment systems
• Performance evaluation of unit operations for water and wastewater processes
• Decentralized wastewater treatment processes
Project Management
• Preparation of technical project proposal including project activities and time frames
• Preparation of financial proposal including costing and budgeting and contact documents
• Coordination of project and execution of project activities and report writing
Environmental Monitoring and Assessment
• Water, and wastewater quality monitoring and assessment to ensure compliance with standards
• Environmental Auditing of water, wastewater, solid and hazardous waste management
• Compliance with environmental legislation
Environmental Studies
• Environmental Impact Assessment
• Feasibility studies on water, wastewater and solid waste management
• Environmental administration
MS Office
• Application of MS Word for preparation of Report Writing and articles writing
• Application of MS Excel in spread sheet and simple modelling
• Application of Power Point for presenting technical proposal, progress reports.
Personal Attributes
• Effective team member to assist timely completion of targets
• Can work well under pressure without supervision to meet deadlines
• Easily adoptable to new cultures due to multi-cultural work experience
• Creative and innovative to add value to my work
• Good communication and collaborative project work
Employment History
2. Senior Environmental Engineer (Contract Basis) January/2012 – January/2014
Environmental Management Consultant Pvt Limited.
Key responsibilities:
• Environmental Monitoring for water, wastewater, storm water, solid and hazardous waste for
municipal government and industry.
• Baselines studies pertaining to water, wastewater, Solid and Hazardous Waste
• Carry out Environmental Impact Assessment for development Projects in environmental sectors.
• Environmental investigation for ensuring compliance with local environmental legislation and
report writing for submission to monitoring agency.
• Liaise with local communities on the environmental projects that could affect the community
rights and ensuring community participation and consultations
• Project Management for design, operation and maintenance of infrastructure for water,
wastewater, storm water, solid and hazardous waste.
• Asset Management of water, wastewater and waste landfill infrastructures for industries as well
as municipal government.
• Environmental Management System for industries for their ISO 14000 certification to ensuring
compliance with environmental legislation with respect to their water, wastewater and solid /
hazardous waste infrastructures.
• Relationship management with both the internal and the external stakeholders.
• Understand and anticipate the needs of our customers and tailor solutions to meet their needs.
Key achievements:
• Environmental Monitoring of industrial waste effluent, solid and hazardous waste in
compliance with Self-Monitoring and Evaluation in Karachi.
• Managed Project for OMV Oil Field to propose modification of existing water / wastewater
infrastructure and design of treatment process.
• Monitored water and wastewater infrastructure including collection and treatment system for
Karachi city for local government.
• Conducted Environmental Impact assessment (EIA) of various companies including Macdonald
Food Company for setting up food outlet in Beach areas in Karachi
• In-house training sessions provided to the Hino Pak Industry about environmental legislation
for their ISO 14000 certification.
• Managed Project for Environmental Risk Engineering for Excide Industry in Karachi
• Conducted Environmental Audit of Industries to set up wastewater collection & treatment
Deputy Director (Technical)- Project Operation Manager Oct /2004 – April/2006
National Program for Improvement of Watercourses.
Key responsibilities:
• Design, monitoring and evaluation of civil construction work in water and storm water collection
infrastructure for quality assurance.
• Preparation and review of documentation including Financial and Technical Sanctions and award
of contract.
• Team Leader for media campaign for the Project.
During the above period, I worked on Faculty Positions in Universities as FULL TIME employee (2011-2015):
• Assistant Professor University of Dammam, Saudi Arabia (Jan 2014- June 2015)
• Post Doctoral Researcher Hokkaido University, Japan (Aug 2013- Oct. 2013)
• Post Doctoral Researcher Hokkaido University, Japan (Oct 2011- Dec. 2011)
• Assistant Professor National University of Science & Tech., Pakistan (Feb 2013 to Sept. 2013)
• Assistant Professor Institute of Business Management, Pakistan, (Aug 2012 to Jan 2013)
3. • Application of communication and negotiating skills to motivate farmers to participate in the
Project.
• Asset management of water infrastructure and database management using GIS based system
for irrigation drains
Key achievements:
• Improvement of Watercourses completed in the allotted districts.
• Implemented Media Campaign successfully to boost the Project.
• Established database of watercourses in allotted District.
Assistant Director (Technical) April /1998 – August /2008
Environmental Protection Agency
Key responsibilities:
• Environmental Administration and Project Management: Planning, design, operation and
maintenance of water & wastewater infrastructure, solid & hazardous waste management,
project execution and budgeting
• Environmental Monitoring and Assessment: undertake environmental studies including
Environmental Impact Assessment), Environmental Auditing and setting up Environmental
Management Plans for industries and municipal governments.
• Water Quality Assessment: Undertaking water quality assessment in compliance with
environmental quality standards and report writing.
• Environmental Risk Engineering: Undertaking environmental risk studies and prepare
contingency plans for environmental hazards.
• Relationship management with both the internal and the external stakeholders.
• Customer Service: Understand and anticipate the needs of our customers and tailor solutions to
meet their needs.
• Stakeholder Coordination and Collaborations: Carried out various projects in coordination with
NGOs and line departments.
• Environmental Legislation: Compliance with environmental legislation for water/wastewater
quality standards with municipal government and industries.
Key achievements:
• Environmental Protection and Resource Conservation Project: All sub projects for water,
wastewater quality assessment, Solid and hazardous waste management, IEE/EIA, industrial
environmental monitoring completed on time.
• Coordinated study for formulation of database of studies on environment in Sindh
• Completed Environmental Auditing of various companies including Javedan and
Chemitex
• Completed Post EIA Monitoring of offshore oil and gas exploration projects in Pakistan
for
various companies such as LASMO, Shell and BV Pak, British Gas Pak. and Total Exploration
and Production Pakistan.
• Implemented Media Campaign successfully to boost the Project.
• Established database of watercourses in allotted District.
Environmental Engineer January /1996 – March/1998
Environmental Management Consultant Pvt Limited
Key responsibilities:
• Assisting in execution of projects for design, operation and maintenance of infrastructure for
water, wastewater, storm water, solid and hazardous waste management.
4. • Field visits for data collection for environmental impact assessment (EIA) for development
Projects.
• Assisting in preparation of Environmental Management System (EMS) for industries for their ISO
14000 certification to ensuring compliance with environmental legislation.
• Relationship management with both the internal and the external stakeholders.
Key achievements:
• Assisted in project activities including visit of industries for collection of primary data for
water/ wastewater collection and treatment and data collection for various EIAs.
• Participated in collection of data required for ISO 14000 certification for various
industries.
Education/Qualifications/Training
PhD (Built Environment) 2008-2011
Hokkaido University, Japan
Master of Engineering (Built Environment) 2006-2008
Hokkaido University, Japan
Master of Engineering (Built Environment) 1990-1995
Mehran University, Pakistan
Professional Memberships
Community Involvement/Voluntary Work
Academic Affairs Officer in the Hokkaido University’s student organization to plan and organize student’s
events and activities.
Interests
Participate in social gatherings to celebrate events, take part in Table Tennis, Organizing symposiums and
delivering presentations on research articles.
Referees
Referees available on request