Mono ethylene glycol is a chemical often used for plant and pipeline integrity management - but if used incorrectly it can have an adverse effect on a facility. Advisian’s Steve Cooper discusses what needs to be considered when working with MEG at the IChemE Hazards Australiasia Conference in Melbourne
conversion of waste plastic into fuel
contents
waste to fuel
wte plants around the world
flow diagram
pyrolysis of plastic
pyrolysis principal
reaction & catalytic cracking
catalys tused
figure
condenser
nitrogen cylinder
advantge
thank u
any question
Mono ethylene glycol is a chemical often used for plant and pipeline integrity management - but if used incorrectly it can have an adverse effect on a facility. Advisian’s Steve Cooper discusses what needs to be considered when working with MEG at the IChemE Hazards Australiasia Conference in Melbourne
conversion of waste plastic into fuel
contents
waste to fuel
wte plants around the world
flow diagram
pyrolysis of plastic
pyrolysis principal
reaction & catalytic cracking
catalys tused
figure
condenser
nitrogen cylinder
advantge
thank u
any question
call for papers, research paper publishing, where to publish research paper, journal publishing, how to publish research paper, Call For research paper, international journal, publishing a paper, IJEI, call for papers 2012,journal of science and technology, how to get a research paper published, publishing a paper, publishing of journal, research and review articles, engineering journal, International Journal of Engineering Inventions, hard copy of journal, hard copy of certificates, journal of engineering, online Submission, where to publish research paper, journal publishing, international journal, publishing a paper, hard copy journal, engineering journal
Conference for Catalysis Webinar 2021: "The Key Role of Catalysts and Adsorb...Dr. Meritxell Vila
Energy transition is a challenge for refineries and petrochemical plants. In this sense, the role of catalysts and adsorbents will be crucial in three areas:
New schemes of refineries: crude oil to chemicals (COTC)
Production of biofuels
Production of green hydrogen
This presentation was done at Catalysis Webinar 2021, the 24th March.
PRODUCTION OF LIQUID FUELS FROM WASTE HDPE PLASTICS AND OPTIMIZING PARAMETERSIAEME Publication
In my research of fuel production through waste HDPE and plastic with the help of plastic to catalyst ratio as a catalyst in that first of all i prepare a mild steel closed air tight vessel having a lid on the top of it along with the hole which is attached by a long galvanize steel pipe then I filled the container up ¾ of its height with the waste plastic and polythene then by using external source of heater temperature of closed chamber is arises up to 300o C-450o C from room temperature on which the pyrolysis takes place which converts the waste plastic or polythene in useful fuel whose texture ,odour, colour, and all other properties like flash point ,fire point, cloud point, pour point, viscosity, are almost near to the petrol. After that the outcome fuel from a waste plastic or polythene is used as a normal fuel in a 100 CC bike and found the fuel gives more millage as compare to petrol about 4-6 km. Which increases the efficiency of the engine by 5-8%.& by using Taguchi Technique I optimize the various parameters which affects the production of plastic fuel by using advance technique I found the plastic to catalyst ratio is most affecting parameter.
Crimson Publishers-Temperature Assessment and Process Optimization of Alkali ...CrimsonPublishersRDMS
Temperature Assessment and Process Optimization of Alkali Catalyzed Transesterification of Waste Cooking Oil Using Microwave Flow System by Hamed Nayebzadeh in Research & Development in Material Science
Catalyst poisons & fouling mechanisms the impact on catalyst performance Gerard B. Hawkins
Primary Effects
Secondary Effects
Typical Poisons in hydrocarbon processing
Permanent Poisons
- Arsenic, lead, mercury, cadmium…
- Silica, Iron Oxide….
Temporary Poisons
- Sulfur, Chlorides, Carbon
Boiler Feed water impurities
Heavy Metals
Foulants
THE NATURE OF CARBON DEPOSITS FORMED ON CATALYSTS
- CARBON FORMATION
Type A, B, C
- FEEDSTOCK COMPOSITION EFFECTS
COMMERCIAL’ CARBON DEPOSITS
- CARBON BURNING IN AIR
- CARBON REMOVAL BY STEAMING
- CARBON BURN CONTROL METHODS
- CATALYST – REACTION WITH STEAM
- MAXIMUM OXYGEN CONCENTRATION
- TEMPERATURE OF THE CATALYST SURFACE DURING CARBON BURNS
- CONDITIONS TO BURN OFF CARBON COATED CATALYST
- EFFECT OF CARBON FORMATION
These slides are developed for a part of the undergraduate course in Petroleum Refinery Engineering. The slides are also helpful for Masters level introductory course.
International Refereed Journal of Engineering and Science (IRJES)irjes
a leading international journal for publication of new ideas, the state of the art research results and fundamental advances in all aspects of Engineering and Science. IRJES is a open access, peer reviewed international journal with a primary objective to provide the academic community and industry for the submission of half of original research and applications.
SiO2@FeSO4 nano composite: A recoverable nano-catalyst for eco-friendly synth...Iranian Chemical Society
Various aldoximes and ketoximes synthesis of corresponding aldehydes and ketones in the presence of SiO2@FeSO4 nano composite as recoverable nano catalyst and NH2OH·HCl. The SiO2@FeSO4 nano composite system was carried out between 10 to 15 min in oil bath (70-80 °C) under solvent-free condition in excellent yields in addition this protocol can be used for industrial scales. This method offers some advantages in term of clean reaction conditions, easy work-up procedure, short reaction time, applied to convert α-diketones to α-diketoximes (as longer than other carbonyl compounds), α,β-unsaturated aldehydes and ketones to corresponding oximes and suppression of any side product. So we think that NH2OH•HCl/SiO2@FeSO4 nano composite system could be considered a new and useful addition to the present methodologies in this area. Structure of products and nano composite elucidation was carried out by 1H NMR, 13C NMR, FT-IR, scanning electron microscopy (SEM).
call for papers, research paper publishing, where to publish research paper, journal publishing, how to publish research paper, Call For research paper, international journal, publishing a paper, IJEI, call for papers 2012,journal of science and technology, how to get a research paper published, publishing a paper, publishing of journal, research and review articles, engineering journal, International Journal of Engineering Inventions, hard copy of journal, hard copy of certificates, journal of engineering, online Submission, where to publish research paper, journal publishing, international journal, publishing a paper, hard copy journal, engineering journal
Conference for Catalysis Webinar 2021: "The Key Role of Catalysts and Adsorb...Dr. Meritxell Vila
Energy transition is a challenge for refineries and petrochemical plants. In this sense, the role of catalysts and adsorbents will be crucial in three areas:
New schemes of refineries: crude oil to chemicals (COTC)
Production of biofuels
Production of green hydrogen
This presentation was done at Catalysis Webinar 2021, the 24th March.
PRODUCTION OF LIQUID FUELS FROM WASTE HDPE PLASTICS AND OPTIMIZING PARAMETERSIAEME Publication
In my research of fuel production through waste HDPE and plastic with the help of plastic to catalyst ratio as a catalyst in that first of all i prepare a mild steel closed air tight vessel having a lid on the top of it along with the hole which is attached by a long galvanize steel pipe then I filled the container up ¾ of its height with the waste plastic and polythene then by using external source of heater temperature of closed chamber is arises up to 300o C-450o C from room temperature on which the pyrolysis takes place which converts the waste plastic or polythene in useful fuel whose texture ,odour, colour, and all other properties like flash point ,fire point, cloud point, pour point, viscosity, are almost near to the petrol. After that the outcome fuel from a waste plastic or polythene is used as a normal fuel in a 100 CC bike and found the fuel gives more millage as compare to petrol about 4-6 km. Which increases the efficiency of the engine by 5-8%.& by using Taguchi Technique I optimize the various parameters which affects the production of plastic fuel by using advance technique I found the plastic to catalyst ratio is most affecting parameter.
Crimson Publishers-Temperature Assessment and Process Optimization of Alkali ...CrimsonPublishersRDMS
Temperature Assessment and Process Optimization of Alkali Catalyzed Transesterification of Waste Cooking Oil Using Microwave Flow System by Hamed Nayebzadeh in Research & Development in Material Science
Catalyst poisons & fouling mechanisms the impact on catalyst performance Gerard B. Hawkins
Primary Effects
Secondary Effects
Typical Poisons in hydrocarbon processing
Permanent Poisons
- Arsenic, lead, mercury, cadmium…
- Silica, Iron Oxide….
Temporary Poisons
- Sulfur, Chlorides, Carbon
Boiler Feed water impurities
Heavy Metals
Foulants
THE NATURE OF CARBON DEPOSITS FORMED ON CATALYSTS
- CARBON FORMATION
Type A, B, C
- FEEDSTOCK COMPOSITION EFFECTS
COMMERCIAL’ CARBON DEPOSITS
- CARBON BURNING IN AIR
- CARBON REMOVAL BY STEAMING
- CARBON BURN CONTROL METHODS
- CATALYST – REACTION WITH STEAM
- MAXIMUM OXYGEN CONCENTRATION
- TEMPERATURE OF THE CATALYST SURFACE DURING CARBON BURNS
- CONDITIONS TO BURN OFF CARBON COATED CATALYST
- EFFECT OF CARBON FORMATION
These slides are developed for a part of the undergraduate course in Petroleum Refinery Engineering. The slides are also helpful for Masters level introductory course.
International Refereed Journal of Engineering and Science (IRJES)irjes
a leading international journal for publication of new ideas, the state of the art research results and fundamental advances in all aspects of Engineering and Science. IRJES is a open access, peer reviewed international journal with a primary objective to provide the academic community and industry for the submission of half of original research and applications.
SiO2@FeSO4 nano composite: A recoverable nano-catalyst for eco-friendly synth...Iranian Chemical Society
Various aldoximes and ketoximes synthesis of corresponding aldehydes and ketones in the presence of SiO2@FeSO4 nano composite as recoverable nano catalyst and NH2OH·HCl. The SiO2@FeSO4 nano composite system was carried out between 10 to 15 min in oil bath (70-80 °C) under solvent-free condition in excellent yields in addition this protocol can be used for industrial scales. This method offers some advantages in term of clean reaction conditions, easy work-up procedure, short reaction time, applied to convert α-diketones to α-diketoximes (as longer than other carbonyl compounds), α,β-unsaturated aldehydes and ketones to corresponding oximes and suppression of any side product. So we think that NH2OH•HCl/SiO2@FeSO4 nano composite system could be considered a new and useful addition to the present methodologies in this area. Structure of products and nano composite elucidation was carried out by 1H NMR, 13C NMR, FT-IR, scanning electron microscopy (SEM).
Standard Test For Ash From Petroleum Products , D482Student
Standard Test For Ash From Petroleum Products , D482
Ash contents is defined as the inorganic residue that remains after combustion of the oil in air at specific high temperature. Ash ranges from 0.1% to 0.2%. The ash content of a fuel is a measure of the amount of inorganic noncombustible material it contains. Some of the ash forming constituents occur naturally in crude oil: others are present as a result of refining or contamination during storage or distribution. For instance, it could be due to the presence of compounds of the following elements: vanadium, sodium, calcium, magnesium, zinc, lead, iron, nickel. Or it could be picked up by the crude oil during storage and handling. Metals content above 200 ppm are considered to be significant but the variations are very large. The higher the ash content the higher is the tendency of the crude oil to form sludge or sediment. Oils containing more than 0.05% ash are considered high ash oils; those containing less than 0.02% ash are considered low ash oils.
Prepared By Yasir Albeatiy
IJERA (International journal of Engineering Research and Applications) is International online, ... peer reviewed journal. For more detail or submit your article, please visit www.ijera.com
IJERA (International journal of Engineering Research and Applications) is International online, ... peer reviewed journal. For more detail or submit your article, please visit www.ijera.com
It is a nanotechnology question. In which you are able to pick one m.pdfarihantstoneart
It is a nanotechnology question. In which you are able to pick one material for both questions or
one material for question one and another for question two.
Solution
Energy is of great importance in human life because of its benefits as the main resource for
human activity.
The application of nano technology or nano material in the field of energy, which involves
lithium-ion battery, fuel cell, light emitting diode (LED), ultra-capacitor, and solar cell
(including Grätzel cell).
Nanotechnology will bring significant benefits to the energy sector, especially to energy storage
and solar energy. Improved materials efficiency and reduced manufacturing costs are just two of
the real economic benefits that nanotechnology already brings these fields and that’s only the
beginning. Battery storage capacity could be extended, solar cells could be produced cheaper,
and the lifetime of solar cells or batteries for electric cars could be increased, all thanks to
continued development of nanotechnology.
The following nanomaterial technologies will be of particular importance: \"organic and printed
electronics\", \"nano-coatings\", \"nano-composites\", \"nano-fluids\", \"nano-catalysts\",
\"nanocarbons\" and \"nano-electrodes\".
Nanocomposites can be found in nano-structured solar cells and PV (e.g. in polymer-inorganic
PV cells, or as polymer gel electrolytes in dye-sensitized solar cells DSSC or quantum-dot
sensitized solar cells QDSSC) . Nanocomposites are also used for the capture of energy in
silicon-based solar cells, typically in the form of nanowires Nanocomposites can also be found in
antirefl ection coatings and higher solar transmittance coatings on collector glazing (e.g. Ti-Si-O
fi lms via sol-gel-method) In the fi eld of energy storage the advantages of nanocomposites are
needed in thin, fl exible energy storage devices with nanocomposite units, e.g. supercapacitors,
Li-ion batteries and hybrid devices Nanotechnology in the sectors of solar energy and energy
storage Additionally, nanocomposites can be used in the process of semiconductor-assisted
photocatalysis for fuel production in order to obtain solar hydrogen or methanol For example, the
nanocomposites applied here are TiO2 -Gold composite nanoparticles or semiconductor-
semiconductor composites Another fi eld of application lies in the wind energy sector, where
lightweight nanocomposite materials are mainly used for rotor blades.
nanocomposites can be found in nano-structured solar cells and PV (e.g. in polymer-inorganic
PV cells, or as polymer gel electrolytes in dye-sensitized solar cells DSSC or quantum-dot
sensitized solar cells QDSSC) Nanocomposites are also used for the capture of energy in silicon-
based solar cells, typically in the form of nanowires . Nanocomposites can also be found in
antirefl ection coatings and higher solar transmittance coatings on collector glazing (e.g. Ti-Si-O
fi lms via sol-gel-method) . In the fi eld of energy storage the advantages of nanocomposites .
It is a full explanition of the nanotechnology
its usefull for the engineering & technical people's
in the content of the ideology is implemented for the renewable energy source
its a best explanation of nanotechnology
In this presentation i have described about nanotechnology in present and future automobiles.And i also gave applications regarding nanotechnology in automobiles.
This presentation made by koya university student shwan sarwan
download it to get the high quality, because it became a little messy .
apple, computer, htc, ipad, iphone, lg, motorola, nokia, padair, pc, samsung, samsunggalaxytabs, smartphone, tab, tablet
Immunizing Image Classifiers Against Localized Adversary Attacksgerogepatton
This paper addresses the vulnerability of deep learning models, particularly convolutional neural networks
(CNN)s, to adversarial attacks and presents a proactive training technique designed to counter them. We
introduce a novel volumization algorithm, which transforms 2D images into 3D volumetric representations.
When combined with 3D convolution and deep curriculum learning optimization (CLO), itsignificantly improves
the immunity of models against localized universal attacks by up to 40%. We evaluate our proposed approach
using contemporary CNN architectures and the modified Canadian Institute for Advanced Research (CIFAR-10
and CIFAR-100) and ImageNet Large Scale Visual Recognition Challenge (ILSVRC12) datasets, showcasing
accuracy improvements over previous techniques. The results indicate that the combination of the volumetric
input and curriculum learning holds significant promise for mitigating adversarial attacks without necessitating
adversary training.
Forklift Classes Overview by Intella PartsIntella Parts
Discover the different forklift classes and their specific applications. Learn how to choose the right forklift for your needs to ensure safety, efficiency, and compliance in your operations.
For more technical information, visit our website https://intellaparts.com
We have compiled the most important slides from each speaker's presentation. This year’s compilation, available for free, captures the key insights and contributions shared during the DfMAy 2024 conference.
Cosmetic shop management system project report.pdfKamal Acharya
Buying new cosmetic products is difficult. It can even be scary for those who have sensitive skin and are prone to skin trouble. The information needed to alleviate this problem is on the back of each product, but it's thought to interpret those ingredient lists unless you have a background in chemistry.
Instead of buying and hoping for the best, we can use data science to help us predict which products may be good fits for us. It includes various function programs to do the above mentioned tasks.
Data file handling has been effectively used in the program.
The automated cosmetic shop management system should deal with the automation of general workflow and administration process of the shop. The main processes of the system focus on customer's request where the system is able to search the most appropriate products and deliver it to the customers. It should help the employees to quickly identify the list of cosmetic product that have reached the minimum quantity and also keep a track of expired date for each cosmetic product. It should help the employees to find the rack number in which the product is placed.It is also Faster and more efficient way.
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)MdTanvirMahtab2
This presentation is about the working procedure of Shahjalal Fertilizer Company Limited (SFCL). A Govt. owned Company of Bangladesh Chemical Industries Corporation under Ministry of Industries.
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
Understanding Inductive Bias in Machine LearningSUTEJAS
This presentation explores the concept of inductive bias in machine learning. It explains how algorithms come with built-in assumptions and preferences that guide the learning process. You'll learn about the different types of inductive bias and how they can impact the performance and generalizability of machine learning models.
The presentation also covers the positive and negative aspects of inductive bias, along with strategies for mitigating potential drawbacks. We'll explore examples of how bias manifests in algorithms like neural networks and decision trees.
By understanding inductive bias, you can gain valuable insights into how machine learning models work and make informed decisions when building and deploying them.
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...Amil Baba Dawood bangali
Contact with Dawood Bhai Just call on +92322-6382012 and we'll help you. We'll solve all your problems within 12 to 24 hours and with 101% guarantee and with astrology systematic. If you want to take any personal or professional advice then also you can call us on +92322-6382012 , ONLINE LOVE PROBLEM & Other all types of Daily Life Problem's.Then CALL or WHATSAPP us on +92322-6382012 and Get all these problems solutions here by Amil Baba DAWOOD BANGALI
#vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore#blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #blackmagicforlove #blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #Amilbabainuk #amilbabainspain #amilbabaindubai #Amilbabainnorway #amilbabainkrachi #amilbabainlahore #amilbabaingujranwalan #amilbabainislamabad
Hybrid optimization of pumped hydro system and solar- Engr. Abdul-Azeez.pdffxintegritypublishin
Advancements in technology unveil a myriad of electrical and electronic breakthroughs geared towards efficiently harnessing limited resources to meet human energy demands. The optimization of hybrid solar PV panels and pumped hydro energy supply systems plays a pivotal role in utilizing natural resources effectively. This initiative not only benefits humanity but also fosters environmental sustainability. The study investigated the design optimization of these hybrid systems, focusing on understanding solar radiation patterns, identifying geographical influences on solar radiation, formulating a mathematical model for system optimization, and determining the optimal configuration of PV panels and pumped hydro storage. Through a comparative analysis approach and eight weeks of data collection, the study addressed key research questions related to solar radiation patterns and optimal system design. The findings highlighted regions with heightened solar radiation levels, showcasing substantial potential for power generation and emphasizing the system's efficiency. Optimizing system design significantly boosted power generation, promoted renewable energy utilization, and enhanced energy storage capacity. The study underscored the benefits of optimizing hybrid solar PV panels and pumped hydro energy supply systems for sustainable energy usage. Optimizing the design of solar PV panels and pumped hydro energy supply systems as examined across diverse climatic conditions in a developing country, not only enhances power generation but also improves the integration of renewable energy sources and boosts energy storage capacities, particularly beneficial for less economically prosperous regions. Additionally, the study provides valuable insights for advancing energy research in economically viable areas. Recommendations included conducting site-specific assessments, utilizing advanced modeling tools, implementing regular maintenance protocols, and enhancing communication among system components.
Hybrid optimization of pumped hydro system and solar- Engr. Abdul-Azeez.pdf
Nano-materials using in chemical engineering (Nano Catalyst)
1. Introduction
Nano catalysis
Improved
Economy
Minimum
Chemical
waste
Safer
Catalysis
And reagents
Optimum
Feedstock
Utilization
Waste
Water
treatment
Reduced
Global
warming
Energy
Efficiency
The nanocatalyst will have
applications in the estimated
12 million diesel engines in
use today for the farm,
industrial, airport service,
construction, mining, railway,
logging, recreational, and
light commercial sectors. In
the petrochemical industry,
the Nano catalyst will have
applications in fluid cracking
and hydro-cracking processes
In the era of nanoscience
where all the devices
and technologies are
going to smaller and
smaller in size with
improved properties;
catalysis is an important
field of application.
Nanomaterials are those
which have structured
components
with at least one
dimension less than 100
nm. Materials that
have one dimension in the
nanoscale (and are
extended in the
other two dimensions) are
layers, such as a thin films
or surface
coatings. Some of the
features of computer chips
come in this
category.
ZnO nanorods on Au and Nio catalyst
applications