My photographs
•Download as PPTX, PDF•
0 likes•163 views
The document discusses potential front cover images for a magazine. The author prefers two images circled in a contact sheet because they have compositions that are well-suited for magazine splash pages. Specifically, the author will use the circled image on the front cover but will edit the color, as it is too yellow. They chose this image over others because of its orientation, the model's subtle welcoming smile, and the relevance of the busy background posters.
Report
Share
Report
Share
Recommended
Matt 5 images from the photoshoot
The document discusses several potential images to use on the front cover of a magazine. It analyzes each image, considering whether the model is smiling, how they could position the title, whether the image quality would allow for clean cutting out, and whether shadows would cause issues. In the end, the author selects one image to use, citing that the model looks relaxed and friendly, it will be easy to cut out professionally, and position the title without issues.
Choosing cover photo
The document discusses the selection of a cover photo for a magazine. Four photos from a shoot are being considered. For each photo, the positives and negatives are described in terms of composition, space for text elements, lighting, and eye contact with the viewer. After revisiting one photo initially passed over, its unusual pose is highlighted as eye-catching despite less personal eye contact. Crowd opinions are solicited, with the last photo receiving most votes for its difference from other covers and fit with the alternative theme, though it needs brightening.
Prelinimary Task
The document discusses the process of selecting and editing photos for a college magazine cover. Several photos were taken around campus but issues like poor lighting, an unhappy expression, and cluttered backgrounds meant they were unsuitable. One photo of the author looking at the camera was preferred, but cropping and removing distractions from the background improved it for the cover. The final edited photo with a plain brick wall in the background was selected for the magazine cover.
Making it
The document summarizes the process of designing the front cover and contents page for a magazine. Key points:
- The student used photo editing software to adjust brightness/contrast of a photo and cut out a male model for the cover. Shadow was added to make him appear in the same location.
- The font color was changed to red to make it more eye-catching against the background.
- A photo of the model was cut out and placed on the contents page to draw the reader's focus, portraying her as an inspiration for the target audience.
- Layering was used to make the model on the contents page appear 3D and stand out from the text.
Printscreen Powerpoint 2
By adjusting the Colour Picker to yellow, the document creator used the rectangle tool to make a box shape as the contents page masthead. This masthead would be big, eye-catching and stylish, similar to another magazine's masthead. The creator kept the masthead font black to stay consistent with the colour scheme and added the date in a lighter colour for clarity.
The creator then added an Editor's Invoice in a small corner font. An image of the main artist focus was added and initially positioned on the left, but issues arose so it was moved to the right instead, though problems remained. Positioning it back to the left left wasted space, so a grey banner was added to make elements more
Failure Photography
The document discusses various photos taken for a magazine cover and article layout. It analyzes each photo, explaining why some were not chosen. Reasons include unfavorable facial expressions, lighting, quality, positioning cutting off heads, and lack of connection between models in photos meant to show a duet. The photographer took many photos from different angles to have options, but had to carefully test placements to see which images looked most realistic and conveyed the desired mood for the magazine.
Magazine design evaluation
Katie wanted to create a fashion magazine and looked at other popular magazines for layout inspiration. She found a logo font that stood out and fit her magazine. Katie edited photos on the cover and spread to make them stand out on blue backgrounds by adjusting cyan and red tones. Her cover features the title in a prominent font with a model photo. The contents page places a photo on the right with text wrapping around it. While the layout and article writing could be improved, Katie is pleased with how the photos stand out on pages through editing.
Image Manipulation
The document describes the process of editing an image for a magazine cover and contents page. The image was inserted into Photoshop and cropped to fit the magazine cover without distorting the model. Text and other elements were added around the model. The brightness and contrast of the image were increased lightly to make it look more professional and inviting for the cover. For the contents page, the image was cropped slightly to straighten it and inserted on the right side for neat appearance.
Recommended
Matt 5 images from the photoshoot
The document discusses several potential images to use on the front cover of a magazine. It analyzes each image, considering whether the model is smiling, how they could position the title, whether the image quality would allow for clean cutting out, and whether shadows would cause issues. In the end, the author selects one image to use, citing that the model looks relaxed and friendly, it will be easy to cut out professionally, and position the title without issues.
Choosing cover photo
The document discusses the selection of a cover photo for a magazine. Four photos from a shoot are being considered. For each photo, the positives and negatives are described in terms of composition, space for text elements, lighting, and eye contact with the viewer. After revisiting one photo initially passed over, its unusual pose is highlighted as eye-catching despite less personal eye contact. Crowd opinions are solicited, with the last photo receiving most votes for its difference from other covers and fit with the alternative theme, though it needs brightening.
Prelinimary Task
The document discusses the process of selecting and editing photos for a college magazine cover. Several photos were taken around campus but issues like poor lighting, an unhappy expression, and cluttered backgrounds meant they were unsuitable. One photo of the author looking at the camera was preferred, but cropping and removing distractions from the background improved it for the cover. The final edited photo with a plain brick wall in the background was selected for the magazine cover.
Making it
The document summarizes the process of designing the front cover and contents page for a magazine. Key points:
- The student used photo editing software to adjust brightness/contrast of a photo and cut out a male model for the cover. Shadow was added to make him appear in the same location.
- The font color was changed to red to make it more eye-catching against the background.
- A photo of the model was cut out and placed on the contents page to draw the reader's focus, portraying her as an inspiration for the target audience.
- Layering was used to make the model on the contents page appear 3D and stand out from the text.
Printscreen Powerpoint 2
By adjusting the Colour Picker to yellow, the document creator used the rectangle tool to make a box shape as the contents page masthead. This masthead would be big, eye-catching and stylish, similar to another magazine's masthead. The creator kept the masthead font black to stay consistent with the colour scheme and added the date in a lighter colour for clarity.
The creator then added an Editor's Invoice in a small corner font. An image of the main artist focus was added and initially positioned on the left, but issues arose so it was moved to the right instead, though problems remained. Positioning it back to the left left wasted space, so a grey banner was added to make elements more
Failure Photography
The document discusses various photos taken for a magazine cover and article layout. It analyzes each photo, explaining why some were not chosen. Reasons include unfavorable facial expressions, lighting, quality, positioning cutting off heads, and lack of connection between models in photos meant to show a duet. The photographer took many photos from different angles to have options, but had to carefully test placements to see which images looked most realistic and conveyed the desired mood for the magazine.
Magazine design evaluation
Katie wanted to create a fashion magazine and looked at other popular magazines for layout inspiration. She found a logo font that stood out and fit her magazine. Katie edited photos on the cover and spread to make them stand out on blue backgrounds by adjusting cyan and red tones. Her cover features the title in a prominent font with a model photo. The contents page places a photo on the right with text wrapping around it. While the layout and article writing could be improved, Katie is pleased with how the photos stand out on pages through editing.
Image Manipulation
The document describes the process of editing an image for a magazine cover and contents page. The image was inserted into Photoshop and cropped to fit the magazine cover without distorting the model. Text and other elements were added around the model. The brightness and contrast of the image were increased lightly to make it look more professional and inviting for the cover. For the contents page, the image was cropped slightly to straighten it and inserted on the right side for neat appearance.
Development of magazine
The front cover was executed according to the original plans with only minor adjustments. The main title was enlarged to stand out more clearly. The contents page followed the plans except the title was moved to the left for improved appearance. The double page spread differed in locating the quote on the left page for better visibility and adding color coding to the interview for clarity, but kept the full page image as planned.
Front cover photoshop screenshots final draft
The document describes the steps taken to edit a photo and design a magazine cover in Photoshop. Key points:
- An A4 size blank page was created and a photo was imported and cropped to remove the background.
- The photo was enlarged to be the main focus, and the background was changed to black. A masthead was added and fonts were tested.
- The band's name "Blonette" was added, as well as additional text describing them as a new YouTube band. Further edits removed and changed some text.
- Additional tweaks included moving the band name and adding underlying text, creating a heart graphic, and moving text to avoid blank space. A "Win tickets
Printscreen Powerpoint 2
1) The document describes the process of designing a contents page for a magazine, beginning with creating a yellow rectangle as a masthead.
2) An editor's invoice is added in the corner in a small font.
3) The author considers adding a "Regulars box" but decides against it to make room for more pictures.
4) A large main image is centered on the page but then moved to the right side, though this looks unbalanced, so it is moved back to center with a grey margin added.
Photographic Evidence
The document summarizes the selection process for photos to include in a music magazine. The author chose a photo for the front cover that shows the model smiling and making direct eye contact with the reader. For interior pages, a mid-shot photo was selected that focuses on the model's face and shows a friendly expression. Additional photos included a mirror shot that captures the model's reflection and eye contact to represent glamour, and a photo with the model and her dog to provide a realistic glimpse into the celebrity's life.
Results for my first drafts
Kamar Ali received feedback on drafts of magazine pages from a questionnaire. The responses indicated that the front cover looked professional but that the magazine and article titles needed to be more eye-catching. Feedback also suggested changing the images on the front cover and contents pages and reorganizing the contents page layout. People felt the interior page design was messy and its image did not fit. Kamar will make these recommended changes and present the revised drafts in a subsequent post.
Q1
The document discusses the design choices made for a student-created magazine. It describes placing the title in the top left corner as most magazines do. An attention-grabbing font was used for the title. The front cover image depicts a rapper holding a microphone to emphasize their musical career. Color scheme, coverlines, and other design elements were chosen based on research of popular rap magazines. For the contents page, the student followed some conventions but also made some changes, such as including more images than typical. The double-page spread uses conventions like a drop cap but also makes unique design choices like placing the artist's initial behind the text.
Printscreen Powerpoint 2
1) The document describes the process of designing a contents page for a magazine.
2) A yellow rectangle was used as a masthead, and images and text were positioned and repositioned to create balance and parallel layout.
3) Additional elements like regular features boxes and banners were considered but ultimately removed for space reasons.
Magazine design evaluation
The document summarizes the magazine project of Katie Mather. She researched popular magazine covers and contents pages of other magazines to learn what design elements made them appealing. She developed a logo that stood out and matched her fashion magazine theme. Katie experimented with different fonts and images on her cover, contents page, and double page spread. While the photo quality and selection was a strength, she found the layout and writing the article more challenging than anticipated.
Print screens of contents
The document summarizes the process of designing the contents page for a magazine mock-up. Key design elements included organizing the contents in a single column with bold headlines, using red, yellow, and black colors to match the cover, and including a top bar with the date, issue number, and magazine name. Advertisements and photos were added to make the contents more eye-catching for the target audience. The layout was refined through multiple iterations, adjusting colors, images and other elements to improve the professional look of the magazine contents page.
Contents media photos
The document discusses several potential photos for a contents page, evaluating each based on lighting, eye contact, orientation, focus, colors, model expression, and positioning relative to planned text. The writer likes some photos but thinks adjustments like cropping, changing colors, or off-centering the subject could improve them. Their favorite photo has bright colors and will be edited and tested on the page before a final choice is made.
Construction Of Magazine
The document describes the process of designing the front cover, contents page, and double page spread for a music magazine. Key elements included adding a main photo to the black cover, customizing the masthead font in white and red, and including pull quotes and additional details. The contents page listed articles in columns using house style fonts and colors. The double page spread featured a continued color palette and used additional photos and text boxes to showcase an interview excerpt.
Masthead designs gtrrbyrtyrs
The document discusses different masthead design options for a magazine. It provides feedback on several masthead designs, including preferences for a smaller, square masthead that doesn't take up much space and leaves room for a full bleed cover photo. The document also expresses a liking for a purple masthead color that would appeal to a female audience without being too bright, as well as a design with red, bold text that could link to the magazine's content. However, the document notes that any design spread across the top of the cover would not be preferred.
Magazine Contents layout decisions
The document describes the process and decisions made in laying out the contents page of a magazine. Key steps included adding the title at the top using the same font and style as the front cover, placing pictures from the flat plan and adding a stroke around them, numbering the pictures and adding circle graphics to contain the page numbers, and progressively refining the layout by adjusting sizes, colors, and adding additional elements like headlines, stories, and graphics with text.
Ancillary task magazine
1. The document describes the process of creating magazine covers to promote a horror film. Pencil sketches were drawn first, then scanned into Photoshop to create digital layouts.
2. Several draft magazine covers were made with changes to colors, images, and text to improve the horror aesthetic. One cover was chosen as the final version for being most appealing and conveying the genre.
3. Photos were taken of actors for the magazine, with some areas requiring touch-ups in Photoshop due to limitations of the green screen used. The chosen images helped relate the magazine to other promotional materials.
analysis of magazine
The document describes the process of designing a contents page for a music magazine. It discusses selecting an image of a friend in a dress, manipulating it in Photoshop by removing the background. It then details adding a light gray and white logo and background, and positioning the image above the word "Explicit". Text was then added in black and red colors, including "CONTENTS" at the top in a sans serif font made bold. Subtitles were added in a different font made bold and the design was kept simple by keeping all text left-aligned to the image.
Magazine cover layout decisions
The document describes the process and decisions made in laying out a magazine cover. Key points:
- The creator first added a background cover image centered to focus on the main subject. Space was left at the top for the masthead.
- A masthead was added and stretched across the top. Effects like bevel and emboss were used to make it stand out.
- Graphics, headlines, and text were positioned throughout using different colors, sizes, and effects to draw attention and intrigue readers.
- The layout was refined iteratively based on the brief and to improve clarity, balance, and sophistication. Positioning and design elements were adjusted.
Planning and style sheets
The document discusses planning and style sheets for a music magazine. It considers different font types and colors for the magazine title/masthead. Blue and grey are selected as potential colors that are bold yet neutral. Different front cover mockups are presented, exploring layouts centered around a main image with text placement. Sample magazine covers are reviewed for inspiration. Contents page mockups experiment with layouts featuring one or multiple images alongside section listings. Photo planning and contact sheets from a mock photo shoot of an indie girl band are included to illustrate potential feature images.
Dps
The document provides details on planning a photoshoot for a magazine spread featuring a model named Poppy Casson. It includes notes on the shot type, lighting, editing, and selection of photos. One photo was chosen for the spread showing Poppy playing guitar on a bed in black and white. Post-editing involved converting to black and white, highlighting key features with color, and designing the layout in publishing software. Feedback was received on further refinements including positioning page numbers and credits to be less distracting.
My Music Magazine
The document discusses photos chosen for the cover of a music magazine. Several photos are rejected for reasons like busy backgrounds, models not looking at the camera or smiling awkwardly. One photo is chosen because the model makes direct eye contact, the background is plain, and her serious expression is suitable. Feedback on the first draft cover suggests making the title bigger, adding details like the issue number, and toning down the lips. Changes are made for the second draft in response.
Photoshoot
The photographer took several shots during a photo shoot for a magazine. They tried different poses, expressions, and locations to portray different themes and styles. The photographer evaluated each shot based on the composition, how well the facial expressions were captured, and how suitable they were for the magazine. They preferred shots that showed detail in the face, had space for text, and portrayed the intended mood, such as one of the model looking thoughtfully over a bridge. An unplanned shot of the model posing with political graffiti was also favored for its realism and link to current issues.
Dps amended
The document provides details for a photoshoot plan and layout for a digital photoshoot spread (DPS) for a magazine. It includes details on the model, lighting, editing, and photo selection. Feedback was provided on font and color scheme choices. The creator then made changes based on the feedback, selecting new fonts, changing the color scheme to blue and pink, and altering the model's lip and guitar strap colors in photos. Further revisions were made based on teacher feedback, including repositioning elements like the masthead, photo credit, and page numbers to make the layout less distracting.
Music Magazine - Photo Options
This document discusses photo options for a magazine cover and contents page.
For the front cover, the author chose a photo where the model has her face turned away with a small smile, as it intrigues the reader. The lighting is almost perfect.
For the contents page, the chosen photo shows the model looking confident and cheerful in front of a mirror, fitting the tone of celebrating her career. The lighting allows colors and objects to be seen clearly.
More Related Content
What's hot
Development of magazine
The front cover was executed according to the original plans with only minor adjustments. The main title was enlarged to stand out more clearly. The contents page followed the plans except the title was moved to the left for improved appearance. The double page spread differed in locating the quote on the left page for better visibility and adding color coding to the interview for clarity, but kept the full page image as planned.
Front cover photoshop screenshots final draft
The document describes the steps taken to edit a photo and design a magazine cover in Photoshop. Key points:
- An A4 size blank page was created and a photo was imported and cropped to remove the background.
- The photo was enlarged to be the main focus, and the background was changed to black. A masthead was added and fonts were tested.
- The band's name "Blonette" was added, as well as additional text describing them as a new YouTube band. Further edits removed and changed some text.
- Additional tweaks included moving the band name and adding underlying text, creating a heart graphic, and moving text to avoid blank space. A "Win tickets
Printscreen Powerpoint 2
1) The document describes the process of designing a contents page for a magazine, beginning with creating a yellow rectangle as a masthead.
2) An editor's invoice is added in the corner in a small font.
3) The author considers adding a "Regulars box" but decides against it to make room for more pictures.
4) A large main image is centered on the page but then moved to the right side, though this looks unbalanced, so it is moved back to center with a grey margin added.
Photographic Evidence
The document summarizes the selection process for photos to include in a music magazine. The author chose a photo for the front cover that shows the model smiling and making direct eye contact with the reader. For interior pages, a mid-shot photo was selected that focuses on the model's face and shows a friendly expression. Additional photos included a mirror shot that captures the model's reflection and eye contact to represent glamour, and a photo with the model and her dog to provide a realistic glimpse into the celebrity's life.
Results for my first drafts
Kamar Ali received feedback on drafts of magazine pages from a questionnaire. The responses indicated that the front cover looked professional but that the magazine and article titles needed to be more eye-catching. Feedback also suggested changing the images on the front cover and contents pages and reorganizing the contents page layout. People felt the interior page design was messy and its image did not fit. Kamar will make these recommended changes and present the revised drafts in a subsequent post.
Q1
The document discusses the design choices made for a student-created magazine. It describes placing the title in the top left corner as most magazines do. An attention-grabbing font was used for the title. The front cover image depicts a rapper holding a microphone to emphasize their musical career. Color scheme, coverlines, and other design elements were chosen based on research of popular rap magazines. For the contents page, the student followed some conventions but also made some changes, such as including more images than typical. The double-page spread uses conventions like a drop cap but also makes unique design choices like placing the artist's initial behind the text.
Printscreen Powerpoint 2
1) The document describes the process of designing a contents page for a magazine.
2) A yellow rectangle was used as a masthead, and images and text were positioned and repositioned to create balance and parallel layout.
3) Additional elements like regular features boxes and banners were considered but ultimately removed for space reasons.
Magazine design evaluation
The document summarizes the magazine project of Katie Mather. She researched popular magazine covers and contents pages of other magazines to learn what design elements made them appealing. She developed a logo that stood out and matched her fashion magazine theme. Katie experimented with different fonts and images on her cover, contents page, and double page spread. While the photo quality and selection was a strength, she found the layout and writing the article more challenging than anticipated.
Print screens of contents
The document summarizes the process of designing the contents page for a magazine mock-up. Key design elements included organizing the contents in a single column with bold headlines, using red, yellow, and black colors to match the cover, and including a top bar with the date, issue number, and magazine name. Advertisements and photos were added to make the contents more eye-catching for the target audience. The layout was refined through multiple iterations, adjusting colors, images and other elements to improve the professional look of the magazine contents page.
Contents media photos
The document discusses several potential photos for a contents page, evaluating each based on lighting, eye contact, orientation, focus, colors, model expression, and positioning relative to planned text. The writer likes some photos but thinks adjustments like cropping, changing colors, or off-centering the subject could improve them. Their favorite photo has bright colors and will be edited and tested on the page before a final choice is made.
Construction Of Magazine
The document describes the process of designing the front cover, contents page, and double page spread for a music magazine. Key elements included adding a main photo to the black cover, customizing the masthead font in white and red, and including pull quotes and additional details. The contents page listed articles in columns using house style fonts and colors. The double page spread featured a continued color palette and used additional photos and text boxes to showcase an interview excerpt.
Masthead designs gtrrbyrtyrs
The document discusses different masthead design options for a magazine. It provides feedback on several masthead designs, including preferences for a smaller, square masthead that doesn't take up much space and leaves room for a full bleed cover photo. The document also expresses a liking for a purple masthead color that would appeal to a female audience without being too bright, as well as a design with red, bold text that could link to the magazine's content. However, the document notes that any design spread across the top of the cover would not be preferred.
Magazine Contents layout decisions
The document describes the process and decisions made in laying out the contents page of a magazine. Key steps included adding the title at the top using the same font and style as the front cover, placing pictures from the flat plan and adding a stroke around them, numbering the pictures and adding circle graphics to contain the page numbers, and progressively refining the layout by adjusting sizes, colors, and adding additional elements like headlines, stories, and graphics with text.
Ancillary task magazine
1. The document describes the process of creating magazine covers to promote a horror film. Pencil sketches were drawn first, then scanned into Photoshop to create digital layouts.
2. Several draft magazine covers were made with changes to colors, images, and text to improve the horror aesthetic. One cover was chosen as the final version for being most appealing and conveying the genre.
3. Photos were taken of actors for the magazine, with some areas requiring touch-ups in Photoshop due to limitations of the green screen used. The chosen images helped relate the magazine to other promotional materials.
analysis of magazine
The document describes the process of designing a contents page for a music magazine. It discusses selecting an image of a friend in a dress, manipulating it in Photoshop by removing the background. It then details adding a light gray and white logo and background, and positioning the image above the word "Explicit". Text was then added in black and red colors, including "CONTENTS" at the top in a sans serif font made bold. Subtitles were added in a different font made bold and the design was kept simple by keeping all text left-aligned to the image.
Magazine cover layout decisions
The document describes the process and decisions made in laying out a magazine cover. Key points:
- The creator first added a background cover image centered to focus on the main subject. Space was left at the top for the masthead.
- A masthead was added and stretched across the top. Effects like bevel and emboss were used to make it stand out.
- Graphics, headlines, and text were positioned throughout using different colors, sizes, and effects to draw attention and intrigue readers.
- The layout was refined iteratively based on the brief and to improve clarity, balance, and sophistication. Positioning and design elements were adjusted.
What's hot (16)
Similar to My photographs
Planning and style sheets
The document discusses planning and style sheets for a music magazine. It considers different font types and colors for the magazine title/masthead. Blue and grey are selected as potential colors that are bold yet neutral. Different front cover mockups are presented, exploring layouts centered around a main image with text placement. Sample magazine covers are reviewed for inspiration. Contents page mockups experiment with layouts featuring one or multiple images alongside section listings. Photo planning and contact sheets from a mock photo shoot of an indie girl band are included to illustrate potential feature images.
Dps
The document provides details on planning a photoshoot for a magazine spread featuring a model named Poppy Casson. It includes notes on the shot type, lighting, editing, and selection of photos. One photo was chosen for the spread showing Poppy playing guitar on a bed in black and white. Post-editing involved converting to black and white, highlighting key features with color, and designing the layout in publishing software. Feedback was received on further refinements including positioning page numbers and credits to be less distracting.
My Music Magazine
The document discusses photos chosen for the cover of a music magazine. Several photos are rejected for reasons like busy backgrounds, models not looking at the camera or smiling awkwardly. One photo is chosen because the model makes direct eye contact, the background is plain, and her serious expression is suitable. Feedback on the first draft cover suggests making the title bigger, adding details like the issue number, and toning down the lips. Changes are made for the second draft in response.
Photoshoot
The photographer took several shots during a photo shoot for a magazine. They tried different poses, expressions, and locations to portray different themes and styles. The photographer evaluated each shot based on the composition, how well the facial expressions were captured, and how suitable they were for the magazine. They preferred shots that showed detail in the face, had space for text, and portrayed the intended mood, such as one of the model looking thoughtfully over a bridge. An unplanned shot of the model posing with political graffiti was also favored for its realism and link to current issues.
Dps amended
The document provides details for a photoshoot plan and layout for a digital photoshoot spread (DPS) for a magazine. It includes details on the model, lighting, editing, and photo selection. Feedback was provided on font and color scheme choices. The creator then made changes based on the feedback, selecting new fonts, changing the color scheme to blue and pink, and altering the model's lip and guitar strap colors in photos. Further revisions were made based on teacher feedback, including repositioning elements like the masthead, photo credit, and page numbers to make the layout less distracting.
Music Magazine - Photo Options
This document discusses photo options for a magazine cover and contents page.
For the front cover, the author chose a photo where the model has her face turned away with a small smile, as it intrigues the reader. The lighting is almost perfect.
For the contents page, the chosen photo shows the model looking confident and cheerful in front of a mirror, fitting the tone of celebrating her career. The lighting allows colors and objects to be seen clearly.
Magizine Presentation
The document provides an analysis of various college magazines that the author reviewed to help design their own college magazine. They found the design of some magazines to be unprofessional and bland, while others used stereotypical stock photos that did not truly represent college students. One magazine incorporated relevant imagery and content layout that the author liked. The document also includes sketches and explanations of the design process for the author's own magazine, including cover layout, imagery, and contents page.
Magizine Presentation
The document provides an analysis of various college magazines that the author reviewed to help design their own college magazine. They found the design of some magazines to be unprofessional and bland, while others used stereotypical stock photos that did not truly represent college students. The author liked how one magazine incorporated relevant imagery and content. They also reviewed another student's magazine design that they felt was unprofessional. The document concludes by outlining the initial design of their own magazine's front cover and contents page.
Jordan 5 images from photoshoot
The document discusses several potential photos for the front cover of a magazine. It analyzes each photo in 1-2 paragraphs. Key points analyzed include whether the photo has a full-body shot, the model's pose and expression, colors, cropping needs, and how inviting and positive the image appears. In the end, the author selects one photo of a model laughing and covering her face, noting it has the most natural pose and inviting, happy expression to represent the magazine.
Magazine analysis
The document analyzes a magazine front cover and contents page created by the author. Some key points:
- The author used Photoshop to design the bright pink masthead and arrange the cover elements.
- The cover lines highlight important articles in colored boxes, and the lead image shows a surprised model.
- The contents page matches the front cover colors and styles articles sections with photos chosen by the author.
- The author notes what design elements worked well (bright colors, lead image) and not as well (cover lines, contents photos) and what was difficult (article ideas) versus easy (assembling in Photoshop).
Dps new
Photos are selected and edited for a magazine feature on singer-songwriter Poppy Casson. Shots include medium close-ups of Casson playing guitar on a bed. Various photos are considered but some are discarded due to cropping issues, lack of space
15 photo preferences
The author selected various photographs for different sections of their magazine cover. For the front cover, they chose a photo of a girl posing with her hand on her hip wearing a purple dress to match the title color. They felt this image best represented their vision. For the double page spread, they worked with others to take a photo of a girl with amazing shadowing that looks like a professional shoot. They plan to layout text around her. For the couple photo, the first photo taken captured shadows making the subjects seem important, as they were smiling and looking like a real couple. They also liked another photo for the contents page. Finally, for the next issue photo, they picked one with all subjects smiling happily like a girl band,
Photo-shoot
During a photo shoot for a rock magazine, the photographer took over 50 pictures but many came out blurry due to fast shutter speed. After careful review, 12 pictures were selected that fit the magazine layout and purpose. These pictures were then edited in Photoshop by removing the green screen background. The main picture selected for the front cover was of a model dressed in dark colors, fitting the style of rock music. The photographer positioned and cropped the picture to draw the viewer in and make the magazine name clearly visible.
Flatplan and rationale re take as
The document provides details on the layout and design choices for a magazine cover and contents page. It discusses using a color palette of red, white, black and gold. Images will be relaxed in tone to create a calm atmosphere for readers. Larger, closer images will be used on the contents page for impact. A gold color will be used for the double page spread to match the images, going against the main color scheme. Font and image placement were considered carefully to guide the reader's eye through the pages.
Media evaluation
The document discusses the process of creating a rock music magazine by using existing professional magazines as inspiration and models. Key elements like mastheads, images, headlines, and layouts were adapted from magazines like NME, Kerrang, and Drummer. Photoshop was used to edit images for the cover and spreads. Indesign was used to design the overall magazine layout, but both programs were challenging to learn. The goal was to incorporate standard magazine conventions while putting an original spin on the designs.
Evidence of my work!
- The document discusses the process of creating a magazine in InDesign, including screenshots of selecting images, laying out pages on a grid, and editing photos.
- The author created a contact sheet to choose images for articles, selecting one with powerful facial expressions. Photos were edited and placed on pages.
- Steps are described for creating a feature article on rock music and violence, including writing with fake blood and selecting pull quotes.
- The contents page was made with the magazine title, "CONTENTS," and images and text listing article pages. An interview spread included a large photo and introduction.
Production Reflection
The document summarizes the production process for a student magazine cover and advertisements. It describes choosing a cover photo of a model with smoke covering his eye to look "edgy." Text was placed behind the model's head to look cleaner. Advertisements and double page spreads were made using photoshopped images and glitches. Photos from different shoots were combined and edited to look more artistic. Overall, the student was happy with how the magazine came out and learned they could add more variety with different locations in the future.
5. pre production(1)
This document contains the design process for a magazine style guide by Madeleine Ross. It includes 3 style sheets exploring different color themes and font choices. Madeleine critiques each option, noting that the first is too bright and childish, the second too muted, and the third does not complement colors well. Madeleine also shares layout designs for the cover and double page spread, and notes photographs needed from own collection versus online. Contingency plans and health and safety considerations for the photo shoot are also outlined.
Contents creation
The document discusses the selection and editing of photographs for inclusion in a music magazine. Several photos are evaluated for their composition, quality, and suitability for representing the genre of music. Some photos are chosen for clearly showing a model with a music instrument or capturing an editor meeting artists. Others are rejected for being low quality, dull, or not adding anything new. The chosen photos then undergo editing to improve brightness, contrast, and remove imperfections. Formatting and design elements like mastheads, headings, and boxes are added to lay them out on the page in a cohesive style matching the magazine brand.
Process- Front Cover
The document describes the process taken to design the front cover of a magazine. Pictures were selected and edited using tools in Photoshop to correct errors and smooth edges. Text elements like the masthead and date were also designed, with fonts selected and backgrounds removed. Colors were chosen and elements were arranged and rearranged on the cover until the designer was satisfied with the overall layout and design.
Similar to My photographs (20)
More from Anya Clayton
Evaluation powerpoint
This document discusses how the author designed their magazine cover and contents pages to attract their target audience. They used a minimal black and white color scheme on the cover to appeal to a more mature audience. Inside the magazine they incorporated more color, like purple, which they felt was gender neutral but may attract more female readers based on survey feedback. They used various fonts throughout for visual interest and consistency. The content and features, like competitions and events, were tailored to keep readers engaged. Overall the design choices were made intentionally to represent the music genre and lifestyle while drawing in the target 18-24 year old demographic.
TASK 11 Layout plans
The document discusses two potential front cover layouts for a music project. While the author initially liked the first title, they decided "Mixology" better fit the genre of music. Both layouts are displayed because the author likes the design of each, even though the name will be changed.
Pitch
Mixology will be a monthly music magazine aimed at students aged 18-24. It will feature the latest club and music scene updates across the UK at an affordable price of £3. The magazine will include articles on new artists and music, club night tips and reviews. As a throwaway magazine, it is intended to be visually appealing with lots of graphics and double page spreads to engage readers and showcase interviews and content.
TASK 14 Photography plan
The document outlines photography plans for various pages of a music magazine. The front cover photo will be a medium close-up shot from a slight low angle of a casually dressed DJ relaxing in a music studio. The double page spread will be a high angle medium long shot of a DJ working festival equipment to show the complexity of their task. The contents page will be a low angle medium long shot two shot of a DJ working in a night club.
TASK 10 STYLE SHEET
The document discusses style choices for a magazine, including a mood board, fonts, and color schemes. For the mood board, the images use repetition of black and white and color photography in a professional yet non-studio style. Font 1 is selected as the main title font as it is bold, clear, and stands out while still being readable in different colors. The color scheme includes purple, which is seen as gender neutral and will complement the black and white background image, with the magazine title in white but the "M" in purple to draw interest.
Magazine analysis
This magazine cover uses black, white and red as its main colours. It features an image of a DJ sitting and waiting to play, reflecting the steady beat of dance music. The text is laid out clearly to allow quick reading. The target audience is likely 18+ interested in events and festivals. Overall the design aims to attract readers quickly with its visuals and easily accessible information.
More from Anya Clayton (6)
Recently uploaded
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...Nguyen Thanh Tu Collection
https://app.box.com/s/tacvl9ekroe9hqupdnjruiypvm9rdaneBeyond Degrees - Empowering the Workforce in the Context of Skills-First.pptx
Iván Bornacelly, Policy Analyst at the OECD Centre for Skills, OECD, presents at the webinar 'Tackling job market gaps with a skills-first approach' on 12 June 2024
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
This Dissertation explores the particular circumstances of Mirzapur, a region located in the
core of India. Mirzapur, with its varied terrains and abundant biodiversity, offers an optimal
environment for investigating the changes in vegetation cover dynamics. Our study utilizes
advanced technologies such as GIS (Geographic Information Systems) and Remote sensing to
analyze the transformations that have taken place over the course of a decade.
The complex relationship between human activities and the environment has been the focus
of extensive research and worry. As the global community grapples with swift urbanization,
population expansion, and economic progress, the effects on natural ecosystems are becoming
more evident. A crucial element of this impact is the alteration of vegetation cover, which plays a
significant role in maintaining the ecological equilibrium of our planet.Land serves as the foundation for all human activities and provides the necessary materials for
these activities. As the most crucial natural resource, its utilization by humans results in different
'Land uses,' which are determined by both human activities and the physical characteristics of the
land.
The utilization of land is impacted by human needs and environmental factors. In countries
like India, rapid population growth and the emphasis on extensive resource exploitation can lead
to significant land degradation, adversely affecting the region's land cover.
Therefore, human intervention has significantly influenced land use patterns over many
centuries, evolving its structure over time and space. In the present era, these changes have
accelerated due to factors such as agriculture and urbanization. Information regarding land use and
cover is essential for various planning and management tasks related to the Earth's surface,
providing crucial environmental data for scientific, resource management, policy purposes, and
diverse human activities.
Accurate understanding of land use and cover is imperative for the development planning
of any area. Consequently, a wide range of professionals, including earth system scientists, land
and water managers, and urban planners, are interested in obtaining data on land use and cover
changes, conversion trends, and other related patterns. The spatial dimensions of land use and
cover support policymakers and scientists in making well-informed decisions, as alterations in
these patterns indicate shifts in economic and social conditions. Monitoring such changes with the
help of Advanced technologies like Remote Sensing and Geographic Information Systems is
crucial for coordinated efforts across different administrative levels. Advanced technologies like
Remote Sensing and Geographic Information Systems
9
Changes in vegetation cover refer to variations in the distribution, composition, and overall
structure of plant communities across different temporal and spatial scales. These changes can
occur natural.
Stack Memory Organization of 8086 Microprocessor
The stack memory organization of 8086 microprocessor.
Gender and Mental Health - Counselling and Family Therapy Applications and In...
A proprietary approach developed by bringing together the best of learning theories from Psychology, design principles from the world of visualization, and pedagogical methods from over a decade of training experience, that enables you to: Learn better, faster!
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Aberdeen
Traditional Musical Instruments of Arunachal Pradesh and Uttar Pradesh - RAYH...
Traditional Musical Instruments of Arunachal Pradesh and Uttar Pradesh
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Pengantar Penggunaan Flutter - Dart programming language1.pptx
How to Setup Warehouse & Location in Odoo 17 Inventory
In this slide, we'll explore how to set up warehouses and locations in Odoo 17 Inventory. This will help us manage our stock effectively, track inventory levels, and streamline warehouse operations.
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
Physical pharmaceutics notes for B.pharm students
BÀI TẬP DẠY THÊM TIẾNG ANH LỚP 7 CẢ NĂM FRIENDS PLUS SÁCH CHÂN TRỜI SÁNG TẠO ...
BÀI TẬP DẠY THÊM TIẾNG ANH LỚP 7 CẢ NĂM FRIENDS PLUS SÁCH CHÂN TRỜI SÁNG TẠO ...Nguyen Thanh Tu Collection
https://app.box.com/s/qhtvq32h4ybf9t49ku85x0n3xl4jhr15BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...Nguyen Thanh Tu Collection
https://app.box.com/s/y977uz6bpd3af4qsebv7r9b7s21935vdWound healing PPT
This document provides an overview of wound healing, its functions, stages, mechanisms, factors affecting it, and complications.
A wound is a break in the integrity of the skin or tissues, which may be associated with disruption of the structure and function.
Healing is the body’s response to injury in an attempt to restore normal structure and functions.
Healing can occur in two ways: Regeneration and Repair
There are 4 phases of wound healing: hemostasis, inflammation, proliferation, and remodeling. This document also describes the mechanism of wound healing. Factors that affect healing include infection, uncontrolled diabetes, poor nutrition, age, anemia, the presence of foreign bodies, etc.
Complications of wound healing like infection, hyperpigmentation of scar, contractures, and keloid formation.
HYPERTENSION - SLIDE SHARE PRESENTATION.
IT WILL BE HELPFULL FOR THE NUSING STUDENTS
IT FOCUSED ON MEDICAL MANAGEMENT AND NURSING MANAGEMENT.
HIGHLIGHTS ON HEALTH EDUCATION.
Leveraging Generative AI to Drive Nonprofit Innovation
In this webinar, participants learned how to utilize Generative AI to streamline operations and elevate member engagement. Amazon Web Service experts provided a customer specific use cases and dived into low/no-code tools that are quick and easy to deploy through Amazon Web Service (AWS.)
Recently uploaded (20)
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...
Beyond Degrees - Empowering the Workforce in the Context of Skills-First.pptx
Beyond Degrees - Empowering the Workforce in the Context of Skills-First.pptx
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
Gender and Mental Health - Counselling and Family Therapy Applications and In...
Gender and Mental Health - Counselling and Family Therapy Applications and In...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
Traditional Musical Instruments of Arunachal Pradesh and Uttar Pradesh - RAYH...
Traditional Musical Instruments of Arunachal Pradesh and Uttar Pradesh - RAYH...
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Pengantar Penggunaan Flutter - Dart programming language1.pptx
How to Setup Warehouse & Location in Odoo 17 Inventory
How to Setup Warehouse & Location in Odoo 17 Inventory
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
BÀI TẬP DẠY THÊM TIẾNG ANH LỚP 7 CẢ NĂM FRIENDS PLUS SÁCH CHÂN TRỜI SÁNG TẠO ...
BÀI TẬP DẠY THÊM TIẾNG ANH LỚP 7 CẢ NĂM FRIENDS PLUS SÁCH CHÂN TRỜI SÁNG TẠO ...
NEWSPAPERS - QUESTION 1 - REVISION POWERPOINT.pptx
NEWSPAPERS - QUESTION 1 - REVISION POWERPOINT.pptx
REASIGNACION 2024 UGEL CHUPACA 2024 UGEL CHUPACA.pdf
REASIGNACION 2024 UGEL CHUPACA 2024 UGEL CHUPACA.pdf
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...
Leveraging Generative AI to Drive Nonprofit Innovation
Leveraging Generative AI to Drive Nonprofit Innovation
My photographs
- 2. Contact sheet for Front Cover. I prefer these images above as I think they are more suited for a magazine splash image because of the composition.
- 3. Here are a few images I looked at from my shoot for the front cover of my magazine. I like the image that is circled the most because of the composition of the image and the angle the shot is taken from. I will chose this image for my front cover however I will use the brightness and contrast tool to edit the colour of the image as I feel it is too yellow. I chose this image over the others as the one at the top left is the wrong orientation so if I cropped the image I felt it would look to dull and there wouldn’t be enough space for text as the model would be too dominant on the page. I think out of all the images I chose this circled image was the best because of the facial expression on the models face. The subtle smile would help to give the magazine a warm feel, where as I feel the expressions pulled on the other images weren’t as welcoming and I felt this was really important for the front of a magazine. I chose a busy background as the posters behind are relevant to the model.