Mohammed Javed Rao
•Download as PPTX, PDF•
1 like•313 views
This presentation provides an overview of automation, SCADA systems, and PLCs. It discusses different types of automation including home, building, industrial, and scientific automation. It provides examples of companies working in home automation. It also discusses advantages of automation. The presentation defines SCADA, provides examples of SCADA software, and lists features of SCADA systems. It introduces PLCs, describes common PLC types, programming methods like ladder logic, and provides programming examples to control motors and lights.
Report
Share
Report
Share
Recommended
Rampazzo - Automated EP
http://www.surfacetreatments.it/thinfilms
Automatic Electropolishing (Vanessa Rampazzo - 15')
Speaker: Vanessa Rampazzo - Legnaro National Laboratories of INFN | Duration: 15 min.
Abstract
Electropolishing is an electrochemical process adopted in order to reduce the internal surface roughness. The process involves a special equilibrium between the reagents and the products, that creates a differential electrical resistance through the micrometric peaks and valleys of surface. This regime is detected collecting the current in function of voltage. Observing dinamically the changes of the characteristic curve during the process it’s possible to ensure the best electropolishing setting.
The Dynamic Control of the best electropolishing point int I-V Plane is done by an automatic program, that collects continuoulsy the voltage and current and calculates in real time the best setting. Roughness smoothing is accompanied by the removal of anomalies on the surface, as pitting and stratches. The automatic program is written in Labview language and works on a industrial computer, a PLC.
A TRAFFIC LIGHT CONTROL SYSTEM USING PROGRAMMABLE LOGIC CONTROLLER
A TRAFFIC LIGHT CONTROL SYSTEM USING PROGRAMMABLE LOGIC CONTROLLERPhD. student @University of Catania,Italy
The document describes a traffic light control system using Programmable Logic Controllers (PLCs). The system uses three PLCs - a master PLC that controls two slave PLCs. The master PLC sends commands to control the light patterns at an intersection. The slave PLCs control the lights for cars and pedestrians. The system was prototyped using a PCB, 3D printed traffic lights, and packaging to test the logic implemented on the PLCs.Troubleshooting in plc
The document provides guidance on troubleshooting Programmable Logic Controller (PLC) systems. It discusses identifying the source of problems, including the power supply, processor module, input/output modules, and ladder logic program. Various troubleshooting steps are outlined for each component, such as checking status indicators, verifying power, and reviewing the program for errors. Communication between the PLC and programming software is also addressed.
Allen bradley
Allen Bradley is a manufacturer of programmable logic controllers (PLCs). They produce hardware such as central processing units, input/output modules, and power supplies. Their PLCs range from small compact models to larger modular systems. Allen Bradley PLCs use ladder logic programming and support protocols like RS-232 and DH-485 for communication. Memory in the PLC is organized into program and data files that are used to store ladder logic and input/output status information.
Automatic car parking
1. The document presents an automatic car parking mechanism using a neuro fuzzy controller tuned by a genetic algorithm.
2. The neuro fuzzy controller is based on a radial basis function neural network with Gaussian membership functions. The weights in the hidden layer are tuned by a genetic algorithm.
3. The genetic algorithm implements dynamic crossover and mutation probabilities to better optimize the neuro fuzzy controller parameters. This allows the controller to be self-tuning.
4. The proposed neuro fuzzy controller can be applied to automatically control the steering angle in a car parking process.
POLYHOUSE AUTOMATION USING PLC
As we all know that agriculture is the backbone of our country. Agriculture plays a vital role in our economy of our country. Near about 40-50% of our population depends on agriculture and it's related field for their survival. Hence to increase the productivity we go for POLY HOUSE AUTOMATION.
Plc and scada project ppt
This document provides an overview of a presentation on programmable logic controllers (PLCs) and supervisory control and data acquisition (SCADA) systems. It discusses key topics including automation, PLC architecture and programming, SCADA features and software, dynamic process graphics, alarms, trends, security, and recipe management. The presentation aims to explain how PLCs and SCADA systems are used for industrial automation and process control.
Elm 327 Obd
The ELM 327 is a programmed microcontroller that translates the onboard diagnostic (OBD) interface to Bluetooth to interface with both PCs and smartphones. It is compatible with all cars that follow the generic OBD standard and can read real-time data from the vehicle's self-diagnostic system, including engine RPM, coolant temperature, vehicle speed, fuel trim levels, and more. The ELM 327 uses the OBD-II standard interface and supports protocols like SAE J1850 PWM/VPW, ISO 9141-2, ISO 14230-4 KWP, and ISO 15765-4 CAN. Open-source Android apps like Torque Lite and OBD App allow users to connect to the ELM 327
Recommended
Rampazzo - Automated EP
http://www.surfacetreatments.it/thinfilms
Automatic Electropolishing (Vanessa Rampazzo - 15')
Speaker: Vanessa Rampazzo - Legnaro National Laboratories of INFN | Duration: 15 min.
Abstract
Electropolishing is an electrochemical process adopted in order to reduce the internal surface roughness. The process involves a special equilibrium between the reagents and the products, that creates a differential electrical resistance through the micrometric peaks and valleys of surface. This regime is detected collecting the current in function of voltage. Observing dinamically the changes of the characteristic curve during the process it’s possible to ensure the best electropolishing setting.
The Dynamic Control of the best electropolishing point int I-V Plane is done by an automatic program, that collects continuoulsy the voltage and current and calculates in real time the best setting. Roughness smoothing is accompanied by the removal of anomalies on the surface, as pitting and stratches. The automatic program is written in Labview language and works on a industrial computer, a PLC.
A TRAFFIC LIGHT CONTROL SYSTEM USING PROGRAMMABLE LOGIC CONTROLLER
A TRAFFIC LIGHT CONTROL SYSTEM USING PROGRAMMABLE LOGIC CONTROLLERPhD. student @University of Catania,Italy
The document describes a traffic light control system using Programmable Logic Controllers (PLCs). The system uses three PLCs - a master PLC that controls two slave PLCs. The master PLC sends commands to control the light patterns at an intersection. The slave PLCs control the lights for cars and pedestrians. The system was prototyped using a PCB, 3D printed traffic lights, and packaging to test the logic implemented on the PLCs.Troubleshooting in plc
The document provides guidance on troubleshooting Programmable Logic Controller (PLC) systems. It discusses identifying the source of problems, including the power supply, processor module, input/output modules, and ladder logic program. Various troubleshooting steps are outlined for each component, such as checking status indicators, verifying power, and reviewing the program for errors. Communication between the PLC and programming software is also addressed.
Allen bradley
Allen Bradley is a manufacturer of programmable logic controllers (PLCs). They produce hardware such as central processing units, input/output modules, and power supplies. Their PLCs range from small compact models to larger modular systems. Allen Bradley PLCs use ladder logic programming and support protocols like RS-232 and DH-485 for communication. Memory in the PLC is organized into program and data files that are used to store ladder logic and input/output status information.
Automatic car parking
1. The document presents an automatic car parking mechanism using a neuro fuzzy controller tuned by a genetic algorithm.
2. The neuro fuzzy controller is based on a radial basis function neural network with Gaussian membership functions. The weights in the hidden layer are tuned by a genetic algorithm.
3. The genetic algorithm implements dynamic crossover and mutation probabilities to better optimize the neuro fuzzy controller parameters. This allows the controller to be self-tuning.
4. The proposed neuro fuzzy controller can be applied to automatically control the steering angle in a car parking process.
POLYHOUSE AUTOMATION USING PLC
As we all know that agriculture is the backbone of our country. Agriculture plays a vital role in our economy of our country. Near about 40-50% of our population depends on agriculture and it's related field for their survival. Hence to increase the productivity we go for POLY HOUSE AUTOMATION.
Plc and scada project ppt
This document provides an overview of a presentation on programmable logic controllers (PLCs) and supervisory control and data acquisition (SCADA) systems. It discusses key topics including automation, PLC architecture and programming, SCADA features and software, dynamic process graphics, alarms, trends, security, and recipe management. The presentation aims to explain how PLCs and SCADA systems are used for industrial automation and process control.
Elm 327 Obd
The ELM 327 is a programmed microcontroller that translates the onboard diagnostic (OBD) interface to Bluetooth to interface with both PCs and smartphones. It is compatible with all cars that follow the generic OBD standard and can read real-time data from the vehicle's self-diagnostic system, including engine RPM, coolant temperature, vehicle speed, fuel trim levels, and more. The ELM 327 uses the OBD-II standard interface and supports protocols like SAE J1850 PWM/VPW, ISO 9141-2, ISO 14230-4 KWP, and ISO 15765-4 CAN. Open-source Android apps like Torque Lite and OBD App allow users to connect to the ELM 327
programmable logical controller(PLC)
The document provides an overview of programmable logic controllers (PLCs). It discusses that PLCs were invented in 1968 to replace relay-based control systems. The document then describes the basic architecture of a PLC including its main components like the power supply, input/output modules, processor, and programming device. It also discusses the different types of PLC programming including ladder logic and the use of timers and counters. Some key applications and advantages of PLCs are that they provide reliable, flexible and cost-effective control of complex automation systems.
Pe 3231 week 15 18 plc
The document discusses programmable logic controllers (PLCs). It outlines the general objectives of explaining PLC concepts such as structure, programming languages, logic gates, timers, counters, and shift registers. It also discusses PLC programming applications and provides information on PLCs including their definition, advantages, functions, basic control systems, hardware components, software components, programming formats, logic gates, Boolean algebra, timers, counters, and shift registers. Examples of PLC programming problems for machines are also presented.
Plc Paper Presentation By Durreshahwar
This document describes the design of a PLC-based smart lifting system using pneumatic components. The system uses a PLC as the main controller along with pneumatic actuators powered by an air compressor. It is configured to pick up and place objects at specified heights according to the object's detected height. The design includes modules for feeding, height detection, and robotic arm functions. Ladder logic programming was used to program the PLC and provide real-time monitoring of the system. The implemented design was demonstrated and shown to successfully detect object heights and control the lifting and placing of objects through three degrees of freedom.
Electronics counter
This document describes a mini project to build an electronic counter that can count up to 10,000 using an infrared light sensor and integrated circuits. It presents the motivation, objectives, introduction, components, block diagram, circuit diagram, working, applications, problems faced, and future scope of the electronic counter project. The counter automates manual counting and is designed using low power CMOS ICs. It uses a light dependent resistor, timer IC, decade counter, BCD to 7-segment display, and 7-segment display. The counter has applications in industries, parking areas, offices, and other areas to automate counting.
Ppt on rs logix 5000
A programmable logic controller (PLC) is a solid state device that can be programmed to control industrial equipment and processes. It allows for easy programming changes by maintenance personnel and plant engineers. PLCs can operate in harsh industrial environments. RSLogix 5000 software is used to program Allen-Bradley PLCs like ControlLogix, CompactLogix, and FlexLogix. It uses names to represent data variables instead of memory addresses.
Real Time System Validation using Hardware in Loop (HIL) Digital Platform
Dr. Shimi S.L presents information on real time system validation using hardware-in-the-loop (HIL) digital platforms. HIL allows testing embedded systems by interacting them with simulated plant models in real time. This enables testing systems in unlimited scenarios without risks to actual hardware. Applications include controller design and testing, closed-loop testing of devices, SCADA systems studies, microgrid studies, and protection scheme design. DSpace and OPAL-RT are popular HIL platforms that interface simulated plant models with physical controllers using computation units and I/O interfaces. HIL provides an effective method for rigorous real-time testing of systems before deployment.
07 comunicação mestre escravo
The document discusses setting up LOGO! basic devices in a master-slave configuration. It explains that the slave device must be configured with its IP address and subnet mask and set to operate in slave mode. The master device is then configured with its IP address and subnet mask and set to normal operating mode. Network input and output functions can then be used in the master's program to read inputs and control outputs of the slave device. An example wiring diagram shows digital and analog signals being exchanged between the master and slave devices.
Plc ( programable logic controllers)
Programmable logic controllers (PLCs) have evolved from relay controllers and semiconductor logic controllers. PLCs are commonly used in industrial applications for on-off control, sequential control, feedback control, and motion control. PLCs have input and output modules that interface with field devices, a processor that runs the user-defined control program, and memory. Leading PLC manufacturers include Allen-Bradley, Siemens, and Omron. PLCs offer advantages over traditional controllers like easy reprogramming, real-time operation, low cost, and minimal maintenance.
The line follower robot
The robot must be capable of following a line, taking turns, and being insensitive to environmental factors like lighting and noise. It must allow calibration of the line's darkness threshold and not be affected by the color of the line as long as it is darker or brighter than the surroundings.
SE5R
This document summarizes the specifications of an electronic weighing indicator that features:
- A water resistant front panel and high sensitivity A/D converter
- The ability to access up to 8 load cell sets of 350Ω each
- An internal display resolution of up to 19 bits
- Adjustable digital filtering and calibration via 2 or 5 point linear methods
- Self-diagnostic functions and the saving of calibration/function settings to EEPROM
- Interface options that include RS-422/485, parallel BCD, analog and RS-232 outputs
Programmable logic controllers
This document provides an overview of programmable logic controllers (PLCs) and their history and applications. It discusses how the first PLC was developed by General Motors in 1968 to replace a relay-based system. It also covers PLC components like the CPU, I/O modules, memory organization, and programming environments. Additional topics include sensors, discrete and analog I/O, addressing schemes, programming instructions like moves, comparisons, and counters. The purpose is to introduce students to basic PLC programming concepts.
Drivers2
This document discusses the development of a microcontroller-based driver for stepper motors to control robotic movements. It describes using an AT89c51 microcontroller and ULN2003 driver chip to control a stepper motor through darlington pairs for high current gain. The driver allows precise control of stepper motors for applications in robotics, industry, and other fields.
PLC Guide
PLC Programming Tutorials, PLC Theory, PLC Logic, PLC Interview Questions and Answers, PLC Ladder Logic, PLC Example Programs, Programmable Logic Controllers Study Materials.
Presentation on PLC and SCADA
The document is a presentation about Rockwell Automation and programmable logic controllers (PLCs) given by Anil Maurya. It discusses how Rockwell Automation was founded in 1903 and acquired Allen-Bradley in 1985. PLCs were developed to replace relays and began being used widely in manufacturing in the 1970s and 1980s. The presentation covers components of automation systems including PLCs, variable frequency drives, and SCADA/HMI. It provides examples of how PLCs can be used to control systems like traffic lights and conveyor belts.
plc introduction
This document provides an overview of programmable logic controllers (PLCs). It discusses that PLCs can implement logic control functions through programming and are commonly used in industrial automation. The document also describes the basic components of a PLC including the processor, inputs/outputs, power supply, and communication ports. It explains how PLCs differ from computers and discusses some common PLC applications like controlling conveyor systems and gates.
Programmable Logic Controller and ladder logic programming
This document provides an introduction to programmable logic controllers (PLCs) and ladder logic programming. It defines a PLC as a small computer used to automate industrial processes by monitoring inputs and making decisions to control outputs based on a stored program. The document outlines the basic components of a PLC including input and output modules and the central processing unit. It then introduces ladder logic as the most common programming language for PLCs, describing the basic symbols of ladder diagrams including contacts, coils, and rungs. Finally, it provides examples of ladder logic programs for AND, OR, and NOT logic operations as well as timers and counters.
PLC Programming | Innovative Automation
Learn what PLC Programming is, how it differs from computer programming, and how PLC programming is used in the industry, specifically how we use it at Innovative Automation.
Lec11
The document discusses the programmable interface device 8155. It can be programmed to perform various I/O functions by writing instructions to internal registers, making it flexible and economical. The 8155 consists of RAM, I/O ports, a timer, and control logic on a single chip connected via a common bus. It allows for configurable and software-programmable I/O, reducing design time. Instructions can set the 8155's ports for input or output and start/stop its timer. The document provides examples of programming the 8155 to output data to LED displays.
Plc scada by bhushan kumbhalkar
PLC stands for programmable logic controller, which is an electronic device used to automate industrial processes. It uses a programming memory to store instructions to control machines and processes. PLCs are commonly used in manufacturing, food processing, metals, power, mining, and petrochemical industries. A PLC has a processor, power supply, input and output modules, and a programming device. PLCs were developed in the 1960s to replace relay-based control systems and became popular in the 1980s due to lower costs. PLCs use ladder logic programming to control inputs like sensors and outputs like motors.
DAC and sensor interfacing with PIC
This document discusses interfacing digital-to-analog converters (DACs) and sensors with PIC microcontrollers. It introduces DACs and common DAC types like R-2R ladder and weighted resistor DACs. It then discusses interfacing a DAC0808 converter to a PIC microcontroller and sensing light intensity with an LDR light sensor. Finally, it describes interfacing the LM75 temperature sensor to a PIC, including the sensor's register structure and digital output representation of temperature readings.
Automatic irrigation using multiparameter monitoring abstract
This is an abstract for the IEEE based ECE Project-Automatic Irrigation Using Multi-parameter Monitoring. It is one of the IEEE based project which can be implemented in real time and has advantages especially for Farmers. This is an abstract of the Project, you can find the Report from "Automatic Irrigation Using Multi-Parameter Monitoring_REPORT"
Presentation Plc Course
This document describes a course on programmable logic control (PLCs) taught through distance learning. It discusses how the course was developed based on the needs of industrial automation. The course aims to train people to automate industry. It will be delivered through distance learning so that more people can access it, including those who cannot attend traditional in-person classes. The course covers introductory concepts, components of automated systems like sensors and actuators, PLC architecture and programming, and ends with practical exercises involving PLC programming. Students will need a PC, software and remote access to a PLC to complete the hands-on work.
More Related Content
What's hot
programmable logical controller(PLC)
The document provides an overview of programmable logic controllers (PLCs). It discusses that PLCs were invented in 1968 to replace relay-based control systems. The document then describes the basic architecture of a PLC including its main components like the power supply, input/output modules, processor, and programming device. It also discusses the different types of PLC programming including ladder logic and the use of timers and counters. Some key applications and advantages of PLCs are that they provide reliable, flexible and cost-effective control of complex automation systems.
Pe 3231 week 15 18 plc
The document discusses programmable logic controllers (PLCs). It outlines the general objectives of explaining PLC concepts such as structure, programming languages, logic gates, timers, counters, and shift registers. It also discusses PLC programming applications and provides information on PLCs including their definition, advantages, functions, basic control systems, hardware components, software components, programming formats, logic gates, Boolean algebra, timers, counters, and shift registers. Examples of PLC programming problems for machines are also presented.
Plc Paper Presentation By Durreshahwar
This document describes the design of a PLC-based smart lifting system using pneumatic components. The system uses a PLC as the main controller along with pneumatic actuators powered by an air compressor. It is configured to pick up and place objects at specified heights according to the object's detected height. The design includes modules for feeding, height detection, and robotic arm functions. Ladder logic programming was used to program the PLC and provide real-time monitoring of the system. The implemented design was demonstrated and shown to successfully detect object heights and control the lifting and placing of objects through three degrees of freedom.
Electronics counter
This document describes a mini project to build an electronic counter that can count up to 10,000 using an infrared light sensor and integrated circuits. It presents the motivation, objectives, introduction, components, block diagram, circuit diagram, working, applications, problems faced, and future scope of the electronic counter project. The counter automates manual counting and is designed using low power CMOS ICs. It uses a light dependent resistor, timer IC, decade counter, BCD to 7-segment display, and 7-segment display. The counter has applications in industries, parking areas, offices, and other areas to automate counting.
Ppt on rs logix 5000
A programmable logic controller (PLC) is a solid state device that can be programmed to control industrial equipment and processes. It allows for easy programming changes by maintenance personnel and plant engineers. PLCs can operate in harsh industrial environments. RSLogix 5000 software is used to program Allen-Bradley PLCs like ControlLogix, CompactLogix, and FlexLogix. It uses names to represent data variables instead of memory addresses.
Real Time System Validation using Hardware in Loop (HIL) Digital Platform
Dr. Shimi S.L presents information on real time system validation using hardware-in-the-loop (HIL) digital platforms. HIL allows testing embedded systems by interacting them with simulated plant models in real time. This enables testing systems in unlimited scenarios without risks to actual hardware. Applications include controller design and testing, closed-loop testing of devices, SCADA systems studies, microgrid studies, and protection scheme design. DSpace and OPAL-RT are popular HIL platforms that interface simulated plant models with physical controllers using computation units and I/O interfaces. HIL provides an effective method for rigorous real-time testing of systems before deployment.
07 comunicação mestre escravo
The document discusses setting up LOGO! basic devices in a master-slave configuration. It explains that the slave device must be configured with its IP address and subnet mask and set to operate in slave mode. The master device is then configured with its IP address and subnet mask and set to normal operating mode. Network input and output functions can then be used in the master's program to read inputs and control outputs of the slave device. An example wiring diagram shows digital and analog signals being exchanged between the master and slave devices.
Plc ( programable logic controllers)
Programmable logic controllers (PLCs) have evolved from relay controllers and semiconductor logic controllers. PLCs are commonly used in industrial applications for on-off control, sequential control, feedback control, and motion control. PLCs have input and output modules that interface with field devices, a processor that runs the user-defined control program, and memory. Leading PLC manufacturers include Allen-Bradley, Siemens, and Omron. PLCs offer advantages over traditional controllers like easy reprogramming, real-time operation, low cost, and minimal maintenance.
The line follower robot
The robot must be capable of following a line, taking turns, and being insensitive to environmental factors like lighting and noise. It must allow calibration of the line's darkness threshold and not be affected by the color of the line as long as it is darker or brighter than the surroundings.
SE5R
This document summarizes the specifications of an electronic weighing indicator that features:
- A water resistant front panel and high sensitivity A/D converter
- The ability to access up to 8 load cell sets of 350Ω each
- An internal display resolution of up to 19 bits
- Adjustable digital filtering and calibration via 2 or 5 point linear methods
- Self-diagnostic functions and the saving of calibration/function settings to EEPROM
- Interface options that include RS-422/485, parallel BCD, analog and RS-232 outputs
Programmable logic controllers
This document provides an overview of programmable logic controllers (PLCs) and their history and applications. It discusses how the first PLC was developed by General Motors in 1968 to replace a relay-based system. It also covers PLC components like the CPU, I/O modules, memory organization, and programming environments. Additional topics include sensors, discrete and analog I/O, addressing schemes, programming instructions like moves, comparisons, and counters. The purpose is to introduce students to basic PLC programming concepts.
Drivers2
This document discusses the development of a microcontroller-based driver for stepper motors to control robotic movements. It describes using an AT89c51 microcontroller and ULN2003 driver chip to control a stepper motor through darlington pairs for high current gain. The driver allows precise control of stepper motors for applications in robotics, industry, and other fields.
PLC Guide
PLC Programming Tutorials, PLC Theory, PLC Logic, PLC Interview Questions and Answers, PLC Ladder Logic, PLC Example Programs, Programmable Logic Controllers Study Materials.
Presentation on PLC and SCADA
The document is a presentation about Rockwell Automation and programmable logic controllers (PLCs) given by Anil Maurya. It discusses how Rockwell Automation was founded in 1903 and acquired Allen-Bradley in 1985. PLCs were developed to replace relays and began being used widely in manufacturing in the 1970s and 1980s. The presentation covers components of automation systems including PLCs, variable frequency drives, and SCADA/HMI. It provides examples of how PLCs can be used to control systems like traffic lights and conveyor belts.
plc introduction
This document provides an overview of programmable logic controllers (PLCs). It discusses that PLCs can implement logic control functions through programming and are commonly used in industrial automation. The document also describes the basic components of a PLC including the processor, inputs/outputs, power supply, and communication ports. It explains how PLCs differ from computers and discusses some common PLC applications like controlling conveyor systems and gates.
Programmable Logic Controller and ladder logic programming
This document provides an introduction to programmable logic controllers (PLCs) and ladder logic programming. It defines a PLC as a small computer used to automate industrial processes by monitoring inputs and making decisions to control outputs based on a stored program. The document outlines the basic components of a PLC including input and output modules and the central processing unit. It then introduces ladder logic as the most common programming language for PLCs, describing the basic symbols of ladder diagrams including contacts, coils, and rungs. Finally, it provides examples of ladder logic programs for AND, OR, and NOT logic operations as well as timers and counters.
PLC Programming | Innovative Automation
Learn what PLC Programming is, how it differs from computer programming, and how PLC programming is used in the industry, specifically how we use it at Innovative Automation.
Lec11
The document discusses the programmable interface device 8155. It can be programmed to perform various I/O functions by writing instructions to internal registers, making it flexible and economical. The 8155 consists of RAM, I/O ports, a timer, and control logic on a single chip connected via a common bus. It allows for configurable and software-programmable I/O, reducing design time. Instructions can set the 8155's ports for input or output and start/stop its timer. The document provides examples of programming the 8155 to output data to LED displays.
Plc scada by bhushan kumbhalkar
PLC stands for programmable logic controller, which is an electronic device used to automate industrial processes. It uses a programming memory to store instructions to control machines and processes. PLCs are commonly used in manufacturing, food processing, metals, power, mining, and petrochemical industries. A PLC has a processor, power supply, input and output modules, and a programming device. PLCs were developed in the 1960s to replace relay-based control systems and became popular in the 1980s due to lower costs. PLCs use ladder logic programming to control inputs like sensors and outputs like motors.
DAC and sensor interfacing with PIC
This document discusses interfacing digital-to-analog converters (DACs) and sensors with PIC microcontrollers. It introduces DACs and common DAC types like R-2R ladder and weighted resistor DACs. It then discusses interfacing a DAC0808 converter to a PIC microcontroller and sensing light intensity with an LDR light sensor. Finally, it describes interfacing the LM75 temperature sensor to a PIC, including the sensor's register structure and digital output representation of temperature readings.
What's hot (20)
Real Time System Validation using Hardware in Loop (HIL) Digital Platform
Real Time System Validation using Hardware in Loop (HIL) Digital Platform
Programmable Logic Controller and ladder logic programming
Programmable Logic Controller and ladder logic programming
Viewers also liked
Automatic irrigation using multiparameter monitoring abstract
This is an abstract for the IEEE based ECE Project-Automatic Irrigation Using Multi-parameter Monitoring. It is one of the IEEE based project which can be implemented in real time and has advantages especially for Farmers. This is an abstract of the Project, you can find the Report from "Automatic Irrigation Using Multi-Parameter Monitoring_REPORT"
Presentation Plc Course
This document describes a course on programmable logic control (PLCs) taught through distance learning. It discusses how the course was developed based on the needs of industrial automation. The course aims to train people to automate industry. It will be delivered through distance learning so that more people can access it, including those who cannot attend traditional in-person classes. The course covers introductory concepts, components of automated systems like sensors and actuators, PLC architecture and programming, and ends with practical exercises involving PLC programming. Students will need a PC, software and remote access to a PLC to complete the hands-on work.
Automatic irrigation and flood controlling system by using GSM
The document describes an automatic irrigation and flood controlling system using GSM. It includes a microcontroller that monitors soil moisture levels using sensors and controls water pumps and gates. The system allows farmers to remotely turn irrigation on and off by sending SMS messages, eliminating the need for manual intervention. It also automatically opens gates when rainfall exceeds a threshold to prevent flooding of fields. The aim is to save water, reduce farmers' workload, and protect crops from damage during heavy rains or a lack of water.
Nfi intro +courses
The document provides information about NFI Industrial Automation Training Academy, including its vision, mission, promoters, courses offered, and training methodology. NFI aims to bridge the skill gap between technical education and industry in India and enhance employability. It offers various online and classroom courses in industrial automation and places students in jobs. Courses cover topics like PLCs, HMIs, SCADA, VFDs, hydraulics, and more.
Final year project presentation
This is density based traffic light control system using Programmable logic controller(PLC). Then side which have more vehicles(density) will be getting on first. This process will take place according to number of vehicles.
AUTOMATIC IRRIGATION SYSTEM
This document describes an automatic irrigation system that uses sensors to control watering. It consists of a microcontroller, moisture sensor, relay, motor and GSM modem. The moisture sensor measures soil moisture and sends readings to the microcontroller. If the moisture is below a set point, the microcontroller activates the relay to power the motor and start irrigation. The system aims to reduce water wastage by only watering when needed. It provides remote monitoring through the GSM modem and costs around 3500 rupees to build. Enhancements could include using DTMF technology for flexible field-level control of irrigation amounts.
Automatic irrigation 1st review(ieee project ece dept)
This document summarizes a project on an automated irrigation system controlled by a microcontroller. It includes sections on the problems with current irrigation methods, the system block diagram, components like soil moisture sensors, an ADC to convert analog sensor readings to digital, an 89S52 microcontroller as the control unit, and a solenoid valve controlled via a relay circuit to regulate water flow. The system aims to automatically irrigate fields based on soil moisture readings to avoid overwatering or underwatering crops.
La nutrizione del mais incontro con agricoltori febbraio 2017
Farmer Meeting - Come migliorare la resa del Mais
Writ107BBusinessProposal
The Battleground is proposing a business that hosts matches of paintball, airsoft, laser tag, and archery tag at one facility. The memo provides details on the purpose, introduction, industry analysis, market analysis, projections, regulations, and marketing and management plans for the business. It aims to attract customers ages 6 and up by providing multiple projectile game options in one location with equipment rentals and membership options. Projections estimate over $800,000 in annual revenue.
McCoubrey,Janelle resume april 2016
Janelle McCoubrey is a Certified Human Resources Professional with over 15 years of experience in human resources, administration, management, and customer service roles. She has a Bachelor of Commerce degree from Nipissing University and a Business - Human Resources diploma from Fanshawe College. Her experience includes assessing staffing needs, recruiting and training employees, maintaining personnel files, facilitating health and safety meetings, accounts payable/receivable, inventory management, and ensuring excellent customer service. She is proficient in Microsoft Office applications and has strong communication, interpersonal, and problem-solving skills.
EWMA 2013 - Ep493 -Creating Champions for Skin Integrity: Facilitating evide...
Parker C, Edwards H, Finlayson K, Chang A, Gibb, M. Queensland University of Technology (QUT), Brisbane, Australia
What is SEYN?
The document summarizes the goals and approach of the Sustainable Energy Youth Network (SEYN). SEYN aims to empower young people to take control of their energy future through energy cooperatives. It has held energy academies in Greece and Croatia bringing together young people and SEYN members. The network follows 10 principles including voluntary membership, democratic control, education and concern for community. It helps members develop energy projects, provides tools and partners, and aims to foster cooperation between SEYN communities.
Estefanyhdez
Este documento presenta información sobre dos parques nacionales naturales de Colombia: el Parque Nacional Natural Río Puré y el Parque Nacional Natural Tamá. El Parque Nacional Natural Río Puré se encuentra en el departamento del Amazonas y cuenta con una gran diversidad de fauna, como monos, aves y peces. El Parque Nacional Natural Tamá se caracteriza por sus paisajes como el páramo y el bosque de niebla, así como por una cascada de más de 820 metros y diversa flora. El documento invita a los turistas a visitar Colombia para conocer la biod
One Midtown - OM (PRINT) pdf
One Midtown is a 223-unit apartment property located in Wilmington, NC. The document provides contact information for the brokers managing the sale of the property, Jordan McCarley, Marc Robinson, Watson Bryant, and Paul Marley of Multi Housing Advisors. It includes an offering summary, property details, location overview, market comparables analysis, financial analysis, and disclosures sections. The property was built in 2015 and has a current occupancy of 91%.
John Bridges
This document provides an update on Mars exploration from NASA/JPL. It summarizes key findings from past missions like the Viking landers and highlights current work by the Curiosity rover. Curiosity has found evidence of past habitability on Mars, including sedimentary rocks deposited in ancient rivers and detection of organic compounds. Future missions like Mars2020 and ExoMars will further investigate signs of past life and collect samples for future return. Our understanding of Mars has evolved from the initial Viking missions - it is now seen as a world that was once warmer and wetter with potential for chemical weathering and habitability.
Medios de comunicacion
Este documento resume los tres tipos principales de medios de comunicación: masivos, auxiliares y alternativos. Los medios masivos incluyen radio, televisión, cine y prensa escrita, que llegan a audiencias grandes de forma simultánea. Los medios auxiliares son cartas, catálogos y folletos que complementan a los masivos. Finalmente, los medios alternativos utilizan formatos menos tradicionales como carteles, volantes y correo electrónico para llegar a amplias audiencias.
Viewers also liked (18)
Automatic irrigation using multiparameter monitoring abstract
Automatic irrigation using multiparameter monitoring abstract
Automatic irrigation and flood controlling system by using GSM
Automatic irrigation and flood controlling system by using GSM
Automatic irrigation 1st review(ieee project ece dept)
Automatic irrigation 1st review(ieee project ece dept)
La nutrizione del mais incontro con agricoltori febbraio 2017
La nutrizione del mais incontro con agricoltori febbraio 2017
EWMA 2013 - Ep493 -Creating Champions for Skin Integrity: Facilitating evide...
EWMA 2013 - Ep493 -Creating Champions for Skin Integrity: Facilitating evide...
Similar to Mohammed Javed Rao
car wash system
This document describes an automated car washing system that uses a programmable logic controller (PLC). It consists of multiple stations for cleaning, rinsing with water, applying soap, rinsing again, and drying. Sensors detect when a car reaches each station and the PLC controls motors and pumps to move the car between stations and operate the cleaning processes. The PLC allows the system to run automatically without human operators, saving time and labor costs compared to manual car washing. PLCs provide benefits like flexible input/output, small size, modularity, and ability to program automated sequences of operations for systems like this car wash.
PLCpptFeb222017.ppt
The document discusses programmable logic controllers (PLCs). It defines PLCs as digitally operating electronic devices that use programmable memory to implement logic functions to control machines and processes through digital and analog inputs and outputs. The document outlines the history and evolution of PLCs from relay-based to solid-state designs. It describes typical PLC architectures, components, programming languages like ladder logic, applications in machine control and other industrial processes, and advantages of PLCs over traditional electromechanical controls.
Shishupal plc
This document summarizes a seminar on programmable logic controllers (PLCs) given by electrical engineering students at a university. It provides an introduction to PLCs, covering their history, major components, operational sequence, programming languages including ladder logic, types of PLCs according to inputs/outputs and construction, and examples of using PLCs to start and stop a motor. Applications of PLCs are discussed along with advantages like reliability and flexibility and disadvantages like limited design options. The future scope of PLCs is also covered, with references provided.
Programmable Logic Controller
This document provides an overview of programmable logic controllers (PLCs). It discusses the basic architecture of PLCs, including their input and output modules. The document also covers the advantages of PLCs over traditional relay-based control systems. Additionally, it examines PLC programming standards like ladder logic and the evolution of PLC architecture over time. Examples are provided to demonstrate basic PLC programming concepts like timers, counters, and logic gates using ladder diagrams.
Plc presentation
A Programmable Logic Controller (PLC) or Programmable Controller is an electronic device used for Automation of industrial processes, such as control of machinery on factory assembly lines.
Summer training plc & scada
CETPA INFOTECH PVT LTD is one of the IT education and training service provider brands of India that is preferably working in 3 most important domains. It includes IT Training services, software and embedded product development and consulting services.
Summer training plc & scada
Industrial automation involves using control systems like PLCs, sensors, and HMIs to control equipment and processes. This increases productivity, quality, and safety while reducing costs. Automation is used across many industries from manufacturing to space technology. It allows plants to operate efficiently in today's competitive global market. Key aspects of industrial automation include PLC programming, industrial networking, motion control, SCADA systems, and various sensors and controllers. Automation has increased production, reliability, flexibility, and reduced costs in industries.
PLC Circuit Design And Basic Programming By Manish kumar
This document provides an overview of a training on PLC circuit design and basic programming. It covers the contents of the training, including basic circuits, PLC fundamentals, ladder logic programming, and a project to program a spherical bolt greasing machine. The document describes the major PLC components, the operating cycle, inputs and outputs, programming methods including ladder logic, and provides diagrams of the electrical drawings and PLC programming for the greasing machine project.
What Is a Programmable Logic Controller (PLC)
The document provides information on programmable logic controllers (PLCs), including common brands of PLCs, the basic components and functions of a PLC, why PLCs are used, advantages over electromechanical relays, differences from PCs, digital and analog I/O devices, programming languages, applications, safety considerations, and key terms. It discusses inputs, logic processing, outputs, and the PLC scan cycle in detail.
Plc scada details and comparison
The document is a PowerPoint presentation on industrial automation submitted by Tamanna Taneja. It discusses key concepts of automation including what automation is, why it is required in industry, and its history. It also covers components used in automation like sensors, transmitters, PLCs, and actuators. Specific automation tools covered are PLCs, SCADA, and HMIs. The presentation provides details on what constitutes a PLC, its programming, inputs and outputs, power supply and memory. It also discusses SCADA features, architecture, trending and applications in various plants.
plc-amp-scada-ppt.pptx
Sofcon offers automation training and courses in PLCs, SCADA, and other automation topics. They provide turnkey automation projects, solutions, and services to industries such as power, chemicals, pharmaceuticals, cement, energy, food, and water management. Sofcon's training wing is committed to strengthening the practical knowledge of engineers, professionals, and technicians. Their courses cover topics like PLC fundamentals, programming, hardware, wiring devices to PLCs, SCADA software usage including graphics, trends, alarms, scripts, and communication. Automation uses control systems and information technologies to reduce human work in production, and includes components like sensors, transmitters, control systems, and output devices in typical installations.
plc-amp-scada-ppt.pptx
Sofcon offers automation training and courses related to PLCs, SCADA, and other industrial automation topics. They provide training on PLC programming, digital electronics, and SCADA software usage. The document also provides an overview of automation components and technologies like sensors, transmitters, control systems, PLCs, and SCADA. It describes typical PLC architecture including inputs, outputs, processor, memory and power supply. Common PLC programming languages and applications in different industries are also mentioned.
Programmable Logic Controller by Pranoti R. Doke
The document provides an overview of programmable logic controllers (PLCs). It discusses that a PLC is a digital computer used for industrial control systems. The major components of a PLC include a processor, input and output modules, power supply, and a programming device. It then explains the basic operational sequence of a PLC which involves input scanning, logic processing, and output scanning. Additional topics covered include ladder logic, examples of controlling motors, advantages and disadvantages of PLCs, and their applications in industry.
Introduction to PLC
PLC is a Valuable Perferct Course, which will be very usefull for the Planners,Designers and Engineers to upgrade their Skills.
plc introduction
The document provides an introduction to programmable logic controllers (PLCs) for industrial automation. It discusses PLC hardware components including the CPU, power supply, memory, and I/O modules. It describes the logical rack configuration and addressing schemes for discrete and analog I/O points. The document also covers common I/O connection modes like sinking and sourcing. Programming methods like ladder logic, function block diagrams, and statement lists are introduced. Finally, the selection of PLCs for different industrial automation needs is briefly addressed.
Automation(plc&scada)
This document discusses automation and SCADA systems. It provides an overview of automation, including its history and impact. Programmable logic controllers (PLCs) are introduced as a type of automation tool. PLCs use ladder logic programming and have input/output modules. SCADA systems are also discussed. SCADA allows for supervisory control and data acquisition in industrial automation by providing dynamic graphics, trending, alarms and other features for monitoring processes. SCADA is used across various industries such as manufacturing, facilities management and electric power systems.
PLC & SCADA
The document is a certificate certifying that Mr. Abhishek Kumar completed a one-month vocational training in advanced PLC programming and SCADA at MSME Tool Room in Jamshedpur from June 16th to July 15th under the supervision of two faculty members. It confirms that the project has not been submitted to any other university or institute for credits.
Microprocessor Week 10: Applications
The document discusses various applications for connecting output devices to the ports of an MCS-51 microcontroller. It describes how LEDs, 7-segment displays, LCD displays, transistors, relays, servo motors, and stepper motors can be connected to the ports and controlled through code. The ports each have a corresponding register that is used to send output signals to the devices or read input signals. Proper voltage levels and electrical connections are required to safely interface different devices with the microcontroller ports.
Basic plc
This document provides an overview of a basic training course on programmable logic controllers (PLCs). It describes the course objectives which are to understand the major PLC components, interpret specifications, troubleshoot PLCs, convert relay logic to PLC programming, and operate and program a PLC for applications. The course covers the history of PLCs, components like the CPU and I/O system, programming concepts, applications, and troubleshooting. It also provides examples of PLC programming for mixing tank controls.
PLC training
This document presents information about programmable logic controllers (PLCs). It discusses that a PLC is a digital computer used for industrial control systems. The document outlines the history of PLCs, their major components including the processor, power supply, and input/output modules. It describes the operational sequence of a PLC including self-test, input scan, logic solve, and output scan. The document provides an example of a ladder logic program for starting and stopping a motor. It lists advantages such as reliability, flexibility, and cost effectiveness. The document also discusses applications of PLCs in industries such as manufacturing, food processing, and materials handling.
Similar to Mohammed Javed Rao (20)
PLC Circuit Design And Basic Programming By Manish kumar
PLC Circuit Design And Basic Programming By Manish kumar
Recently uploaded
Open Channel Flow: fluid flow with a free surface
Open Channel Flow: This topic focuses on fluid flow with a free surface, such as in rivers, canals, and drainage ditches. Key concepts include the classification of flow types (steady vs. unsteady, uniform vs. non-uniform), hydraulic radius, flow resistance, Manning's equation, critical flow conditions, and energy and momentum principles. It also covers flow measurement techniques, gradually varied flow analysis, and the design of open channels. Understanding these principles is vital for effective water resource management and engineering applications.
Sri Guru Hargobind Ji - Bandi Chor Guru.pdf
Sri Guru Hargobind Ji (19 June 1595 - 3 March 1644) is revered as the Sixth Nanak.
• On 25 May 1606 Guru Arjan nominated his son Sri Hargobind Ji as his successor. Shortly
afterwards, Guru Arjan was arrested, tortured and killed by order of the Mogul Emperor
Jahangir.
• Guru Hargobind's succession ceremony took place on 24 June 1606. He was barely
eleven years old when he became 6th Guru.
• As ordered by Guru Arjan Dev Ji, he put on two swords, one indicated his spiritual
authority (PIRI) and the other, his temporal authority (MIRI). He thus for the first time
initiated military tradition in the Sikh faith to resist religious persecution, protect
people’s freedom and independence to practice religion by choice. He transformed
Sikhs to be Saints and Soldier.
• He had a long tenure as Guru, lasting 37 years, 9 months and 3 days
DELTA V MES EMERSON EDUARDO RODRIGUES ENGINEER
EMERSON EDUARDO RODRIGUES
EMERSON EDUARDO RODRIGUES
EMERSON EDUARDO RODRIGUES
EMERSON EDUARDO RODRIGUES
EMERSON EDUARDO RODRIGUES
EMERSON EDUARDO RODRIGUES
EMERSON EDUARDO RODRIGUES
EMERSON EDUARDO RODRIGUES
EMERSON EDUARDO RODRIGUES
EMERSON EDUARDO RODRIGUES
EMERSON EDUARDO RODRIGUES
3rd International Conference on Artificial Intelligence Advances (AIAD 2024)
3rd International Conference on Artificial Intelligence Advances (AIAD 2024) will act as a major forum for the presentation of innovative ideas, approaches, developments, and research projects in the area advanced Artificial Intelligence. It will also serve to facilitate the exchange of information between researchers and industry professionals to discuss the latest issues and advancement in the research area. Core areas of AI and advanced multi-disciplinary and its applications will be covered during the conferences.
FULL STACK PROGRAMMING - Both Front End and Back End
This ppt gives details about Full Stack Programming and its basics.
DESIGN AND MANUFACTURE OF CEILING BOARD USING SAWDUST AND WASTE CARTON MATERI...
The need for ecofriendly materials as building materials in this century cannot be overemphasized
一比一原版(uofo毕业证书)美国俄勒冈大学毕业证如何办理
原版一模一样【微信：741003700 】【(uofo毕业证书)美国俄勒冈大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Blood finder application project report (1).pdf
Blood Finder is an emergency time app where a user can search for the blood banks as
well as the registered blood donors around Mumbai. This application also provide an
opportunity for the user of this application to become a registered donor for this user have
to enroll for the donor request from the application itself. If the admin wish to make user
a registered donor, with some of the formalities with the organization it can be done.
Specialization of this application is that the user will not have to register on sign-in for
searching the blood banks and blood donors it can be just done by installing the
application to the mobile.
The purpose of making this application is to save the user’s time for searching blood of
needed blood group during the time of the emergency.
This is an android application developed in Java and XML with the connectivity of
SQLite database. This application will provide most of basic functionality required for an
emergency time application. All the details of Blood banks and Blood donors are stored
in the database i.e. SQLite.
This application allowed the user to get all the information regarding blood banks and
blood donors such as Name, Number, Address, Blood Group, rather than searching it on
the different websites and wasting the precious time. This application is effective and
user friendly.
Supermarket Management System Project Report.pdf
Supermarket management is a stand-alone J2EE using Eclipse Juno program.
This project contains all the necessary required information about maintaining
the supermarket billing system.
The core idea of this project to minimize the paper work and centralize the
data. Here all the communication is taken in secure manner. That is, in this
application the information will be stored in client itself. For further security the
data base is stored in the back-end oracle and so no intruders can access it.
Properties of Fluids, Fluid Statics, Pressure Measurement
Properties of Fluids: Density, viscosity, surface tension, compressibility, and specific gravity define fluid behavior.
Fluid Statics: Studies pressure, hydrostatic pressure, buoyancy, and fluid forces on surfaces.
Pressure at a Point: In a static fluid, the pressure at any point is the same in all directions. This is known as Pascal's principle. The pressure increases with depth due to the weight of the fluid above.
Hydrostatic Pressure: The pressure exerted by a fluid at rest due to the force of gravity. It can be calculated using the formula P=ρghP=ρgh, where PP is the pressure, ρρ is the fluid density, gg is the acceleration due to gravity, and hh is the height of the fluid column above the point in question.
Buoyancy: The upward force exerted by a fluid on a submerged or partially submerged object. This force is equal to the weight of the fluid displaced by the object, as described by Archimedes' principle. Buoyancy explains why objects float or sink in fluids.
Fluid Pressure on Surfaces: The analysis of pressure forces on surfaces submerged in fluids. This includes calculating the total force and the center of pressure, which is the point where the resultant pressure force acts.
Pressure Measurement: Manometers, barometers, pressure gauges, and differential pressure transducers measure fluid pressure.
FUNDAMENTALS OF MECHANICAL ENGINEERING.pdf
EMERSON EDUARDO RODRIGUES
EMERSON EDUARDO RODRIGUES
EMERSON EDUARDO RODRIGUES
EMERSON EDUARDO RODRIGUES
EMERSON EDUARDO RODRIGUES
EMERSON EDUARDO RODRIGUES
EMERSON EDUARDO RODRIGUES
EMERSON EDUARDO RODRIGUES
EMERSON EDUARDO RODRIGUES
EMERSON EDUARDO RODRIGUES
EMERSON EDUARDO RODRIGUES
OOPS_Lab_Manual - programs using C++ programming language
This manual contains programs on object oriented programming concepts using C++ language.
Unit -II Spectroscopy - EC I B.Tech.pdf
Chemical engineering and electronics engineering and chemical development of the day of the almighty paw paw paw
A high-Speed Communication System is based on the Design of a Bi-NoC Router, ...
The Network on Chip (NoC) has emerged as an effective
solution for intercommunication infrastructure within System on
Chip (SoC) designs, overcoming the limitations of traditional
methods that face significant bottlenecks. However, the complexity
of NoC design presents numerous challenges related to
performance metrics such as scalability, latency, power
consumption, and signal integrity. This project addresses the
issues within the router's memory unit and proposes an enhanced
memory structure. To achieve efficient data transfer, FIFO buffers
are implemented in distributed RAM and virtual channels for
FPGA-based NoC. The project introduces advanced FIFO-based
memory units within the NoC router, assessing their performance
in a Bi-directional NoC (Bi-NoC) configuration. The primary
objective is to reduce the router's workload while enhancing the
FIFO internal structure. To further improve data transfer speed,
a Bi-NoC with a self-configurable intercommunication channel is
suggested. Simulation and synthesis results demonstrate
guaranteed throughput, predictable latency, and equitable
network access, showing significant improvement over previous
designs
Recently uploaded (20)
3rd International Conference on Artificial Intelligence Advances (AIAD 2024)
3rd International Conference on Artificial Intelligence Advances (AIAD 2024)
FULL STACK PROGRAMMING - Both Front End and Back End
FULL STACK PROGRAMMING - Both Front End and Back End
DESIGN AND MANUFACTURE OF CEILING BOARD USING SAWDUST AND WASTE CARTON MATERI...
DESIGN AND MANUFACTURE OF CEILING BOARD USING SAWDUST AND WASTE CARTON MATERI...
309475979-Creativity-Innovation-notes-IV-Sem-2016-pdf.pdf
309475979-Creativity-Innovation-notes-IV-Sem-2016-pdf.pdf
SENTIMENT ANALYSIS ON PPT AND Project template_.pptx
SENTIMENT ANALYSIS ON PPT AND Project template_.pptx
comptia-security-sy0-701-exam-objectives-(5-0).pdf
comptia-security-sy0-701-exam-objectives-(5-0).pdf
Properties of Fluids, Fluid Statics, Pressure Measurement
Properties of Fluids, Fluid Statics, Pressure Measurement
OOPS_Lab_Manual - programs using C++ programming language
OOPS_Lab_Manual - programs using C++ programming language
A high-Speed Communication System is based on the Design of a Bi-NoC Router, ...
A high-Speed Communication System is based on the Design of a Bi-NoC Router, ...
Mohammed Javed Rao
- 1. Presentation on Submitted To: Mr. Manish Bhati Head of department ( Electrical ) Presented By: Mohammed Javed Rao • 7 sem • Electrical
- 6. Types of Automation: Home Automation Building Automation Industrial Automation Scientific Automation Example of companies working on: Home Automation SYNDEIN Godrej ACETECH HONEY WELL John Electrical GENPACT Scientific Automation: DRDO ISRO NASA
- 7. ADVANTAGES Increased throughput or productivity. Improved quality. Improved robustness (consistency), of processes or product. Reduced cost. Reduced man power.
- 10. Wonderware : Intouch Allen bradly : RS view RS logix 500 Siemen : winCC Mitsubishi : MELSEC And many more… software
- 11. Dynamic Process % fill Movement Orientation Visibility Value Display Blinking Object Size Property Push Button Push Button Symbol Factory
- 14. PLC
- 15. Introduction to PLC… • Type of PLC… • Code of PLC… • Ladder Logic... • Programming example…
- 16. Type of PLC… •Allen Bradley PLCs (AB) •ABB PLCs ( Asea Brown Boveri ) •Siemens PLCs •Omron PLCs •Mitsubishi PLCs •Hitachi PLCs •Delta PLCs •General Electric (GE) PLCs •Honeywell PLCs •Modicon PLCs •Schneider Electric PLCs
- 17. PLC is electronic device which interface between input ( Digital, Analog , Spacific ) & output (Digital, Analog , Spacific ). OR PLC is stands for “ Programmable Logic Controller” , is a digital computer designed for multiple inputs and outputs arrangements. A PLC is an example of a real time system.
- 18. Allen Bradley Micrologix 1000
- 20. CODE OF PLC… 1761-L-10-BXB BULLET NO. IEC (International Electrotechnical Commission ) PLC INPUTS OR OUTPUTS PLC’S POWER I/P SUPPLY O/T SUPPLY
- 22. EXAMPLE OF LADDER Hardwar e Softwar e Button require on PLC NO NO NO NC NC NO NO NC NC NC NO NC
- 23. ADDRESSING… • FOR NORMAL CLOSS BUTTON = = I: 0/01 • FOR NORMAL OPEN BUTOON = = I: 0/02 • FOR OUTPUT BUTTON = = o:0.03
- 24. MCB CONNECTORS RELAY SMPS PLC I/P(NO & NC, SENS). O/P VOLT METER AMETER DISPAY CHANNEL
- 25. PROGRAMMING EXAMPE A motor get on from any of the 3 location by pressing No push buttons on the panel . This motor gets off by pressing NC push button on the panel. EXAMPLE 1
- 26. By pressing one NO or 2 NC push buttons, a led gets on. This led gets off by pressing another push button NC on panel. EXAMPLE 2
- 27. TIMER Observing characteristics of TON type timer 1 1 TTEN DN 1 0 0 1
- 28. Graph of T-ON TIMER
- 29. Any question