The document discusses a technical seminar on a buck converter fed by a PV array. It introduces PV systems and their applications. It describes the components of a PV system including PV modules, charge controllers, and buck converters. It explains that a buck converter connected between the PV array and battery uses maximum power point tracking to efficiently charge the battery by operating the PV array at its maximum power point. The document concludes that a buck converter increases the system efficiency when used with an MPPT technique in a PV system.
RES & EC Unit 3 PPT - Solar Photovoltaic System and Design & Ocean Energy, Ti...ARAVIND U
Thanks and Regards...
Mr. U. ARAVIND, B.E., M.I.S.T.E.,
LECTURER / MECHANICAL ENGINEERING
LAKSHMI AMMAL POLYTECHNIC COLLEGE
K.R. NAGAR, KOVILPATTI - 628 503
THOOTHUKUDI DISTRICT, TN
Mobile No: 9943244068
Email Id: aravindulaganathanmech@gmail.com
aravindmech@lapc.in
Solar photovoltaic System and Design:
Solar photovoltaic a brief history of PV,PV in silicon: basic
principle, crystalline PV; reducing cost and raising efficiency, thin film
PV, other innovative technologies, electrical characteristics of silicon
PV cells and modules, grid connected PV system, cost of energy
from PV ,Environmental impact and safety.
System design of solar photovoltaic system: Load analysis-solar
array Design-Battery Design-Simple formulas. System design
procedure. Case Studies: Designing solar home lighting system -
Designing stand alone solar PV Power plant - Designing solar PV
water pumping system - Only arriving load capacity - solar array
sizing - Battery sizing - Inverter capacity and mountings.
Ocean energy, Tidal & Wave energy
Ocean energy resources – principle's of ocean thermal energy
conversion (OTEC) – Methods of Ocean thermal electric power
generation – Energy utilisation – basic principle of tidal power –
components and operations of tidal power plant – Energy and Power
forms of waves – Wave energy conversion devices.
Electrical Alliance contractors have extensive experience installing electrical infrastructure for transportation projects in the Washington D.C. metropolitan area, including hundreds of miles of conduit, cables, and lights for roads, rails, and airports. Transportation electrical work requires skills like installing equipment in poured concrete and excavating. One contractor explained electrical work differs from buildings in that most wiring for transportation is underground once completed. The article provides examples of recent complex transportation projects Electrical Alliance contractors have worked on, including runway and taxiway lighting installations at Dulles International airport and lighting upgrades for the Frederick Douglass Bridge.
The Ceylon Electricity Board (CEB) is Sri Lanka's largest electricity provider, responsible for generation, transmission, distribution and retail of electricity across the country. Its vision is to enrich life through power and its mission is to ensure an efficient, coordinated and economical electricity supply system. The CEB aims to provide electricity to all areas, improve supply quality and service, become financially viable, act as a responsible corporate citizen and develop clean energy. It has strengths in being the sole power producer and owner of assets worth Rs. 300 billion but weaknesses in unproductive employees and external control over important decisions. The CEB has a hierarchical organizational structure led by a General Manager and provides an essential social service while granting employees benefits like
Impact of Electric Vehicle Integration on Gridvivatechijri
Load flow analysis is most essential and important approach to investigate problems in power system. It can provide balance steady state operation of power system without considering transients in it. This project presents a new and efficient method for solving the Load flow problem of a distribution network. By using Backward/Forward sweep method parameters like voltage profile, total power losses, load on each bus of the Distribution Network will be known. By using Load Flow load balancing of the Distribution system can be achieved. For load balancing we will use the power stored in the Electric vehicle. As Electric vehicle has large battery pack for storage. The impact of Electric Vehicle and load flow of distribution network is computer programed to implement the power flow solution scheme in MATLAB software.
when a coil is rotated or turned under a magnetic field, there occurs a force...theijes
The International Journal of Engineering & Science is aimed at providing a platform for researchers, engineers, scientists, or educators to publish their original research results, to exchange new ideas, to disseminate information in innovative designs, engineering experiences and technological skills. It is also the Journal's objective to promote engineering and technology education. All papers submitted to the Journal will be blind peer-reviewed. Only original articles will be published.
The papers for publication in The International Journal of Engineering& Science are selected through rigorous peer reviews to ensure originality, timeliness, relevance, and readability.
Theoretical work submitted to the Journal should be original in its motivation or modeling structure. Empirical analysis should be based on a theoretical framework and should be capable of replication. It is expected that all materials required for replication (including computer programs and data sets) should be available upon request to the authors.
The International Journal of Engineering & Science would take much care in making your article published without much delay with your kind cooperation
design a roof top based solar power stationSumit Sharma
This document presents a project report on the design of a roof top based solar power station for Skyline Institute of Engineering and Technology in Greater Noida. It discusses the proposed installation of photovoltaic modules on suitable roof areas of different blocks in the institute to generate electric power from sunlight as an alternative to power from the local electric utility. The report covers topics such as the types of roof top solar PV systems, available roof area at the institute, annual energy consumption, cost estimation and maintenance schedule for the proposed solar power station.
This document presents a student project on implementing a Cockroft-Walton voltage multiplier circuit. It includes sections on the introduction, literature survey, problem definition, objectives, methodology, working principle, circuit diagram, advantages and disadvantages, references, and conclusion. The Cockroft-Walton voltage multiplier generates high voltage DC from a lower voltage AC source using diodes and capacitors. Each additional stage doubles the output voltage. The project aims to provide a simple, compact, and low-cost method of stepping up AC or pulsed DC voltages for applications requiring high voltages like CRTs.
This document summarizes an internship report submitted by two interns at the Electrical and Mechanical Department of Power Transmission and Distribution IC of Larsen & Toubro Limited. It provides details of their internship, which involved reviewing specifications for the Bangalore Metro Rail Corporation Limited project. It describes the scope of work for electrification of metro rail stations, including earthing philosophy, load details, cable sizing, and distribution transformer sizing. It also discusses metro rail terminology and traction systems used in various Indian metro projects.
BATCH 8 - PROJECT PHASE II - SECOND REVIEW.pptx23mu08
in this slide we discuss about the energy saving using super capacitor for the electric vehicle where we will be using dynamo to regenerative the energy
A thorough study and analysis of the following services systems associated to the building, which are:-
i. water supply system
ii. electrical supply system
iii. sewerage, sanitary & drainage system
iv. mechanical transportation system
v. mechanical ventilation and air-conditioning system
vi. fire protection system
The document summarizes a student project to design a vehicle-to-grid (V2G) system integrating Brookhaven National Laboratory's (BNL) solar grid with electric vehicle charging stations. The project was supported by various programs including CSTEP and LSAMP. The students researched V2G systems and designed modifications to make BNL's electric vehicles compatible. Their proposed system would use the electric vehicles to store excess solar energy and provide it back to the grid when solar supply is low. Future work will include installing and testing the system.
The International Journal of Engineering & Science is aimed at providing a platform for researchers, engineers, scientists, or educators to publish their original research results, to exchange new ideas, to disseminate information in innovative designs, engineering experiences and technological skills. It is also the Journal's objective to promote engineering and technology education. All papers submitted to the Journal will be blind peer-reviewed. Only original articles will be published.
Sustainable Energy for All – A multidisciplinary educational approach.lenses
This document discusses sustainable energy systems and technologies being implemented in Kenya. It provides an overview of various decentralized renewable energy technologies being used, including solar portable lanterns, biogas, and solar PV. It then discusses implementation of these technologies, safety considerations regarding wind loads, water tightness, and electrical safety. Finally, it covers financial incentives like net metering and peak load shaving, and concludes that African higher education institutions should establish their own sustainable energy projects and develop related educational programs.
This project presents a new strategy for load shedding with the aim of providing the consumers with the benefit of using high priority loads of their choice, even when load shedding is done.
A simple low cost bidirectional Power Line Communication (PLC) system is utilized to control and monitor the loads of consumer.
This document provides a summary of a vocational training report at the WBSETCL Kalyani 132 kV substation. It describes the substation's incoming and outgoing feeders, transformers, and provides an overview of the equipment used at the substation including busbars, insulators, isolating switches, and circuit breakers. The trainee expresses gratitude for the opportunity to learn practical skills during their training placement at the substation.
Tools & Techniques for Commissioning and Maintaining PV Systems W-Animations ...Transcat
Join us for this solutions-based webinar on the tools and techniques for commissioning and maintaining PV Systems. In this session, we'll review the process of building and maintaining a solar array, starting with installation and commissioning, then reviewing operations and maintenance of the system. This course will review insulation resistance testing, I-V curve testing, earth-bond continuity, ground resistance testing, performance tests, visual inspections, ground and arc fault testing procedures, and power quality analysis.
Fluke Solar Application Specialist Will White is presenting on this engaging topic:
Will has worked in the renewable energy industry since 2005, first as an installer for a small east coast solar integrator before adding sales, design, and project management to his skillset. In 2022, Will joined Fluke as a solar application specialist, where he supports their renewable energy testing equipment like IV-curve tracers, electrical meters, and thermal imaging cameras. Experienced in wind power, solar thermal, energy storage, and all scales of PV, Will has primarily focused on residential and small commercial systems. He is passionate about implementing high-quality, code-compliant installation techniques.
More Related Content
Similar to Module Five - Cable Tray - NCCER Substation Slides
The document discusses a technical seminar on a buck converter fed by a PV array. It introduces PV systems and their applications. It describes the components of a PV system including PV modules, charge controllers, and buck converters. It explains that a buck converter connected between the PV array and battery uses maximum power point tracking to efficiently charge the battery by operating the PV array at its maximum power point. The document concludes that a buck converter increases the system efficiency when used with an MPPT technique in a PV system.
RES & EC Unit 3 PPT - Solar Photovoltaic System and Design & Ocean Energy, Ti...ARAVIND U
Thanks and Regards...
Mr. U. ARAVIND, B.E., M.I.S.T.E.,
LECTURER / MECHANICAL ENGINEERING
LAKSHMI AMMAL POLYTECHNIC COLLEGE
K.R. NAGAR, KOVILPATTI - 628 503
THOOTHUKUDI DISTRICT, TN
Mobile No: 9943244068
Email Id: aravindulaganathanmech@gmail.com
aravindmech@lapc.in
Solar photovoltaic System and Design:
Solar photovoltaic a brief history of PV,PV in silicon: basic
principle, crystalline PV; reducing cost and raising efficiency, thin film
PV, other innovative technologies, electrical characteristics of silicon
PV cells and modules, grid connected PV system, cost of energy
from PV ,Environmental impact and safety.
System design of solar photovoltaic system: Load analysis-solar
array Design-Battery Design-Simple formulas. System design
procedure. Case Studies: Designing solar home lighting system -
Designing stand alone solar PV Power plant - Designing solar PV
water pumping system - Only arriving load capacity - solar array
sizing - Battery sizing - Inverter capacity and mountings.
Ocean energy, Tidal & Wave energy
Ocean energy resources – principle's of ocean thermal energy
conversion (OTEC) – Methods of Ocean thermal electric power
generation – Energy utilisation – basic principle of tidal power –
components and operations of tidal power plant – Energy and Power
forms of waves – Wave energy conversion devices.
Electrical Alliance contractors have extensive experience installing electrical infrastructure for transportation projects in the Washington D.C. metropolitan area, including hundreds of miles of conduit, cables, and lights for roads, rails, and airports. Transportation electrical work requires skills like installing equipment in poured concrete and excavating. One contractor explained electrical work differs from buildings in that most wiring for transportation is underground once completed. The article provides examples of recent complex transportation projects Electrical Alliance contractors have worked on, including runway and taxiway lighting installations at Dulles International airport and lighting upgrades for the Frederick Douglass Bridge.
The Ceylon Electricity Board (CEB) is Sri Lanka's largest electricity provider, responsible for generation, transmission, distribution and retail of electricity across the country. Its vision is to enrich life through power and its mission is to ensure an efficient, coordinated and economical electricity supply system. The CEB aims to provide electricity to all areas, improve supply quality and service, become financially viable, act as a responsible corporate citizen and develop clean energy. It has strengths in being the sole power producer and owner of assets worth Rs. 300 billion but weaknesses in unproductive employees and external control over important decisions. The CEB has a hierarchical organizational structure led by a General Manager and provides an essential social service while granting employees benefits like
Impact of Electric Vehicle Integration on Gridvivatechijri
Load flow analysis is most essential and important approach to investigate problems in power system. It can provide balance steady state operation of power system without considering transients in it. This project presents a new and efficient method for solving the Load flow problem of a distribution network. By using Backward/Forward sweep method parameters like voltage profile, total power losses, load on each bus of the Distribution Network will be known. By using Load Flow load balancing of the Distribution system can be achieved. For load balancing we will use the power stored in the Electric vehicle. As Electric vehicle has large battery pack for storage. The impact of Electric Vehicle and load flow of distribution network is computer programed to implement the power flow solution scheme in MATLAB software.
when a coil is rotated or turned under a magnetic field, there occurs a force...theijes
The International Journal of Engineering & Science is aimed at providing a platform for researchers, engineers, scientists, or educators to publish their original research results, to exchange new ideas, to disseminate information in innovative designs, engineering experiences and technological skills. It is also the Journal's objective to promote engineering and technology education. All papers submitted to the Journal will be blind peer-reviewed. Only original articles will be published.
The papers for publication in The International Journal of Engineering& Science are selected through rigorous peer reviews to ensure originality, timeliness, relevance, and readability.
Theoretical work submitted to the Journal should be original in its motivation or modeling structure. Empirical analysis should be based on a theoretical framework and should be capable of replication. It is expected that all materials required for replication (including computer programs and data sets) should be available upon request to the authors.
The International Journal of Engineering & Science would take much care in making your article published without much delay with your kind cooperation
design a roof top based solar power stationSumit Sharma
This document presents a project report on the design of a roof top based solar power station for Skyline Institute of Engineering and Technology in Greater Noida. It discusses the proposed installation of photovoltaic modules on suitable roof areas of different blocks in the institute to generate electric power from sunlight as an alternative to power from the local electric utility. The report covers topics such as the types of roof top solar PV systems, available roof area at the institute, annual energy consumption, cost estimation and maintenance schedule for the proposed solar power station.
This document presents a student project on implementing a Cockroft-Walton voltage multiplier circuit. It includes sections on the introduction, literature survey, problem definition, objectives, methodology, working principle, circuit diagram, advantages and disadvantages, references, and conclusion. The Cockroft-Walton voltage multiplier generates high voltage DC from a lower voltage AC source using diodes and capacitors. Each additional stage doubles the output voltage. The project aims to provide a simple, compact, and low-cost method of stepping up AC or pulsed DC voltages for applications requiring high voltages like CRTs.
This document summarizes an internship report submitted by two interns at the Electrical and Mechanical Department of Power Transmission and Distribution IC of Larsen & Toubro Limited. It provides details of their internship, which involved reviewing specifications for the Bangalore Metro Rail Corporation Limited project. It describes the scope of work for electrification of metro rail stations, including earthing philosophy, load details, cable sizing, and distribution transformer sizing. It also discusses metro rail terminology and traction systems used in various Indian metro projects.
BATCH 8 - PROJECT PHASE II - SECOND REVIEW.pptx23mu08
in this slide we discuss about the energy saving using super capacitor for the electric vehicle where we will be using dynamo to regenerative the energy
A thorough study and analysis of the following services systems associated to the building, which are:-
i. water supply system
ii. electrical supply system
iii. sewerage, sanitary & drainage system
iv. mechanical transportation system
v. mechanical ventilation and air-conditioning system
vi. fire protection system
The document summarizes a student project to design a vehicle-to-grid (V2G) system integrating Brookhaven National Laboratory's (BNL) solar grid with electric vehicle charging stations. The project was supported by various programs including CSTEP and LSAMP. The students researched V2G systems and designed modifications to make BNL's electric vehicles compatible. Their proposed system would use the electric vehicles to store excess solar energy and provide it back to the grid when solar supply is low. Future work will include installing and testing the system.
The International Journal of Engineering & Science is aimed at providing a platform for researchers, engineers, scientists, or educators to publish their original research results, to exchange new ideas, to disseminate information in innovative designs, engineering experiences and technological skills. It is also the Journal's objective to promote engineering and technology education. All papers submitted to the Journal will be blind peer-reviewed. Only original articles will be published.
Sustainable Energy for All – A multidisciplinary educational approach.lenses
This document discusses sustainable energy systems and technologies being implemented in Kenya. It provides an overview of various decentralized renewable energy technologies being used, including solar portable lanterns, biogas, and solar PV. It then discusses implementation of these technologies, safety considerations regarding wind loads, water tightness, and electrical safety. Finally, it covers financial incentives like net metering and peak load shaving, and concludes that African higher education institutions should establish their own sustainable energy projects and develop related educational programs.
This project presents a new strategy for load shedding with the aim of providing the consumers with the benefit of using high priority loads of their choice, even when load shedding is done.
A simple low cost bidirectional Power Line Communication (PLC) system is utilized to control and monitor the loads of consumer.
This document provides a summary of a vocational training report at the WBSETCL Kalyani 132 kV substation. It describes the substation's incoming and outgoing feeders, transformers, and provides an overview of the equipment used at the substation including busbars, insulators, isolating switches, and circuit breakers. The trainee expresses gratitude for the opportunity to learn practical skills during their training placement at the substation.
Similar to Module Five - Cable Tray - NCCER Substation Slides (20)
Tools & Techniques for Commissioning and Maintaining PV Systems W-Animations ...Transcat
Join us for this solutions-based webinar on the tools and techniques for commissioning and maintaining PV Systems. In this session, we'll review the process of building and maintaining a solar array, starting with installation and commissioning, then reviewing operations and maintenance of the system. This course will review insulation resistance testing, I-V curve testing, earth-bond continuity, ground resistance testing, performance tests, visual inspections, ground and arc fault testing procedures, and power quality analysis.
Fluke Solar Application Specialist Will White is presenting on this engaging topic:
Will has worked in the renewable energy industry since 2005, first as an installer for a small east coast solar integrator before adding sales, design, and project management to his skillset. In 2022, Will joined Fluke as a solar application specialist, where he supports their renewable energy testing equipment like IV-curve tracers, electrical meters, and thermal imaging cameras. Experienced in wind power, solar thermal, energy storage, and all scales of PV, Will has primarily focused on residential and small commercial systems. He is passionate about implementing high-quality, code-compliant installation techniques.
Applications of artificial Intelligence in Mechanical Engineering.pdfAtif Razi
Historically, mechanical engineering has relied heavily on human expertise and empirical methods to solve complex problems. With the introduction of computer-aided design (CAD) and finite element analysis (FEA), the field took its first steps towards digitization. These tools allowed engineers to simulate and analyze mechanical systems with greater accuracy and efficiency. However, the sheer volume of data generated by modern engineering systems and the increasing complexity of these systems have necessitated more advanced analytical tools, paving the way for AI.
AI offers the capability to process vast amounts of data, identify patterns, and make predictions with a level of speed and accuracy unattainable by traditional methods. This has profound implications for mechanical engineering, enabling more efficient design processes, predictive maintenance strategies, and optimized manufacturing operations. AI-driven tools can learn from historical data, adapt to new information, and continuously improve their performance, making them invaluable in tackling the multifaceted challenges of modern mechanical engineering.
Open Channel Flow: fluid flow with a free surfaceIndrajeet sahu
Open Channel Flow: This topic focuses on fluid flow with a free surface, such as in rivers, canals, and drainage ditches. Key concepts include the classification of flow types (steady vs. unsteady, uniform vs. non-uniform), hydraulic radius, flow resistance, Manning's equation, critical flow conditions, and energy and momentum principles. It also covers flow measurement techniques, gradually varied flow analysis, and the design of open channels. Understanding these principles is vital for effective water resource management and engineering applications.
Supermarket Management System Project Report.pdfKamal Acharya
Supermarket management is a stand-alone J2EE using Eclipse Juno program.
This project contains all the necessary required information about maintaining
the supermarket billing system.
The core idea of this project to minimize the paper work and centralize the
data. Here all the communication is taken in secure manner. That is, in this
application the information will be stored in client itself. For further security the
data base is stored in the back-end oracle and so no intruders can access it.
Digital Twins Computer Networking Paper Presentation.pptxaryanpankaj78
A Digital Twin in computer networking is a virtual representation of a physical network, used to simulate, analyze, and optimize network performance and reliability. It leverages real-time data to enhance network management, predict issues, and improve decision-making processes.
Build the Next Generation of Apps with the Einstein 1 Platform.
Rejoignez Philippe Ozil pour une session de workshops qui vous guidera à travers les détails de la plateforme Einstein 1, l'importance des données pour la création d'applications d'intelligence artificielle et les différents outils et technologies que Salesforce propose pour vous apporter tous les bénéfices de l'IA.