This document discusses various methods for analyzing the mixed dentition, including Moyers analysis, Tanaka and Johnston prediction, Huckaba analysis, and Hixon and Oldfather analysis. It also describes uses of stereophotogrammetry, occlusograms, and 3D occlusogram software to analyze dental casts and predict tooth sizes and arch space during the transitional mixed dentition period.
Model analysis 1 /certified fixed orthodontic courses by Indian dental academy Indian dental academy
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and offering a wide range of dental certified courses in different formats.
Indian dental academy provides dental crown & Bridge,rotary endodontics,fixed orthodontics,
Dental implants courses.for details pls visit www.indiandentalacademy.com ,or call
0091-9248678078
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and
offering a wide range of dental certified courses in different formats.for more details please visit
www.indiandentalacademy.com
Model analysis 1 /certified fixed orthodontic courses by Indian dental academy Indian dental academy
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and offering a wide range of dental certified courses in different formats.
Indian dental academy provides dental crown & Bridge,rotary endodontics,fixed orthodontics,
Dental implants courses.for details pls visit www.indiandentalacademy.com ,or call
0091-9248678078
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and
offering a wide range of dental certified courses in different formats.for more details please visit
www.indiandentalacademy.com
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and
offering a wide range of dental certified courses in different formats.for more details please visit
www.indiandentalacademy.com
Template analysis /certified fixed orthodontic courses by Indian dental acad...Indian dental academy
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and offering a wide range of dental certified courses in different formats.
Indian dental academy provides dental crown & Bridge,rotary endodontics,fixed orthodontics,
Dental implants courses.for details pls visit www.indiandentalacademy.com ,or call
0091-9248678078
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and
offering a wide range of dental certified courses in different formats.for more details please visit
www.indiandentalacademy.com
Introduction
History
Indications and contraindications
Timing of distalization
Second molar extraction
Mandibular molar distalization
Rickett’s criterion
Classification and various distalization appliances
References
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and
offering a wide range of dental certified courses in different formats.for more details please visit
www.indiandentalacademy.com
Tongue and its importance in orthodontic treatment /certified fixed orthodont...Indian dental academy
The Indian Dental Academy is the Leader in
continuing dental education , training dentists
in all aspects of dentistry and offering a wide
range of dental certified courses in different
formats.
Indian dental academy provides dental crown &
Bridge,rotary endodontics,fixed orthodontics,
Dental implants courses.for details pls visit
www.indiandentalacademy.com ,or call
0091-9248678078
Ricketts analysis /certified fixed orthodontic courses by Indian dental academy Indian dental academy
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and offering a wide range of dental certified courses in different formats.
Indian dental academy provides dental crown & Bridge,rotary endodontics,fixed orthodontics,
Dental implants courses.for details pls visit www.indiandentalacademy.com ,or call
0091-9248678078
1ST, 2ND AND 3RD ORDER BENDS IN STANDARD EDGEWISE APPLIANCE SYSTEM /Fixed ort...Indian dental academy
Indian Dental Academy: will be one of the most relevant and exciting training center with best faculty and flexible training programs for dental professionals
who wish to advance in their dental practice,Offers certified courses in Dental implants,Orthodontics,Endodontics,Cosmetic Dentistry, Prosthetic Dentistry,
Periodontics and General Dentistry.
Model analysis in orthodontics /certified fixed orthodontic courses by India...Indian dental academy
Welcome to Indian Dental Academy
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and offering a wide range of dental certified courses in different formats.
Indian dental academy has a unique training program & curriculum that provides students with exceptional clinical skills and enabling them to return to their office with high level confidence and start treating patients
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and
offering a wide range of dental certified courses in different formats.for more details please visit
www.indiandentalacademy.com
Template analysis /certified fixed orthodontic courses by Indian dental acad...Indian dental academy
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and offering a wide range of dental certified courses in different formats.
Indian dental academy provides dental crown & Bridge,rotary endodontics,fixed orthodontics,
Dental implants courses.for details pls visit www.indiandentalacademy.com ,or call
0091-9248678078
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and
offering a wide range of dental certified courses in different formats.for more details please visit
www.indiandentalacademy.com
Introduction
History
Indications and contraindications
Timing of distalization
Second molar extraction
Mandibular molar distalization
Rickett’s criterion
Classification and various distalization appliances
References
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and
offering a wide range of dental certified courses in different formats.for more details please visit
www.indiandentalacademy.com
Tongue and its importance in orthodontic treatment /certified fixed orthodont...Indian dental academy
The Indian Dental Academy is the Leader in
continuing dental education , training dentists
in all aspects of dentistry and offering a wide
range of dental certified courses in different
formats.
Indian dental academy provides dental crown &
Bridge,rotary endodontics,fixed orthodontics,
Dental implants courses.for details pls visit
www.indiandentalacademy.com ,or call
0091-9248678078
Ricketts analysis /certified fixed orthodontic courses by Indian dental academy Indian dental academy
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and offering a wide range of dental certified courses in different formats.
Indian dental academy provides dental crown & Bridge,rotary endodontics,fixed orthodontics,
Dental implants courses.for details pls visit www.indiandentalacademy.com ,or call
0091-9248678078
1ST, 2ND AND 3RD ORDER BENDS IN STANDARD EDGEWISE APPLIANCE SYSTEM /Fixed ort...Indian dental academy
Indian Dental Academy: will be one of the most relevant and exciting training center with best faculty and flexible training programs for dental professionals
who wish to advance in their dental practice,Offers certified courses in Dental implants,Orthodontics,Endodontics,Cosmetic Dentistry, Prosthetic Dentistry,
Periodontics and General Dentistry.
Model analysis in orthodontics /certified fixed orthodontic courses by India...Indian dental academy
Welcome to Indian Dental Academy
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and offering a wide range of dental certified courses in different formats.
Indian dental academy has a unique training program & curriculum that provides students with exceptional clinical skills and enabling them to return to their office with high level confidence and start treating patients
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and
offering a wide range of dental certified courses in different formats.for more details please visit
www.indiandentalacademy.com
Model analysis in orthodontics /certified fixed orthodontic courses by Indian...Indian dental academy
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and offering a wide range of dental certified courses in different formats.
Indian dental academy provides dental crown & Bridge,rotary endodontics,fixed orthodontics,
Dental implants courses.for details pls visit www.indiandentalacademy.com ,or call
0091-9248678078
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and
offering a wide range of dental certified courses in different formats.for more details please visit
www.indiandentalacademy.com
Mixed dentition analysis2 /certified fixed orthodontic courses by Indian dent...Indian dental academy
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and offering a wide range of dental certified courses in different formats.
Indian dental academy provides dental crown & Bridge,rotary endodontics,fixed orthodontics,
Dental implants courses.for details pls visit www.indiandentalacademy.com ,or call
0091-9248678078
Mixed dentition analysis. /certified fixed orthodontic courses by Indian dent...Indian dental academy
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and offering a wide range of dental certified courses in different formats.
Indian dental academy provides dental crown & Bridge,rotary endodontics,fixed orthodontics,
Dental implants courses.for details pls visit www.indiandentalacademy.com ,or call
0091-9248678078
Space analysis /certified fixed orthodontic courses by Indian dental academy Indian dental academy
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and offering a wide range of dental certified courses in different formats.
Indian dental academy provides dental crown & Bridge,rotary endodontics,fixed orthodontics,
Dental implants courses.for details pls visit www.indiandentalacademy.com ,or call
0091-9248678078
Space analysis /certified fixed orthodontic courses by Indian dental academy Indian dental academy
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and offering a wide range of dental certified courses in different formats.
Indian dental academy provides dental crown & Bridge,rotary endodontics,fixed orthodontics,
Dental implants courses.for details pls visit www.indiandentalacademy.com ,or call
0091-9248678078
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and
offering a wide range of dental certified courses in different formats.for more details please visit
www.indiandentalacademy.com
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and
offering a wide range of dental certified courses in different formats.for more details please visit
www.indiandentalacademy.com
Introduction
Essential Diagnostic Aids
Supplemental Diagnostic Aids
Study Cast Analysis
Dental Arch Width
Pont’s Index
Anterior Dental Arch Length
Korkhaus’ Analysis
Intramaxillary Symmetry
Palatal Height
Analysis Of Supporting Zones
Space Analysis
Nance Analysis
Lundstrom Segmental Analysis
Analysis In The Vertical Plane
Bolton Analysis
Analysis Of The Apical Base
Examination Of Occlusion
Opportunity for Dentists (BDS/MDS )to relocate to United kingdom -Register as a DENTAL HYGIENIST/ DENTAL THERAPIST without Board exams and after approval you can register in GDC as a DH/DT and start working as a DH/DT Immediately and get paid.
You can complete the whole process in 3-4 months.Salary range for DH/DT is around 2500-3500 Pounds per month.
Eligibility / requirements-
1. An International English Language Testing System (IELTS) certificate
at the appropriate level.(Within 2 yrs of application date )
2: A recent primary dental qualification that has been taught and examined in English..(Within 2 yrs of application date )
3: A recent pass in a language test for registration with a regulatory authority in a country where the first language is English.
If you are interested Please contact us for more details.
Indian Dental Academy: will be one of the most relevant and exciting training center with best faculty and flexible training programs for dental professionals who wish to advance in their dental practice,Offers certified courses in Dental implants,Orthodontics,Endodontics,Cosmetic Dentistry, Prosthetic Dentistry, Periodontics and General Dentistry.
I –Aligners are made with FDA approved transparent thermoplastic materials using 3D scanning, 3D Printing and finally Trays with Pressure vacuum formers.
Dear Doctor,
Indian Dental Academy Now offers comprehensive online Orthodontics course.
Course includes:
1.whiteboard lecture presentations
2.Case Discussions
3.with hundreds of pictures.
4.Demo on Models
5.Demo on Patients
6. subtitles in your own language
12 months unlimited access and support @350 USD only.
For Demo please visit :www.idalectures.com/preview/
For more details visit: www.idalectures.com
Please contact us for any clarifications:
idalectures@gmail.com
indiandentalacademy@gmail.com
Thanks & Regards
Indian Dental Academy
--
Indian Dental Academy
Leader in continuing dental education
www.indiandentalacademy.com
skype:indiandentalacademy
+919248678078
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and
offering a wide range of dental certified courses in different formats.for more details please visit
www.indiandentalacademy.com
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and
offering a wide range of dental certified courses in different formats.for more details please visit
www.indiandentalacademy.com
Cytotoxicity of silicone materials used in maxillofacial prosthesis / dental ...Indian dental academy
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and
offering a wide range of dental certified courses in different formats.for more details please visit
www.indiandentalacademy.com
Diagnosis and treatment planning in completely endntulous arches/dental coursesIndian dental academy
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and
offering a wide range of dental certified courses in different formats.for more details please visit
www.indiandentalacademy.com
Properties of Denture base materials /rotary endodontic coursesIndian dental academy
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and
offering a wide range of dental certified courses in different formats.for more details please visit
www.indiandentalacademy.com
Use of modified tooth forms in complete denture occlusion / dental implant...Indian dental academy
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and
offering a wide range of dental certified courses in different formats.for more details please visit
www.indiandentalacademy.com
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and
offering a wide range of dental certified courses in different formats.for more details please visit
www.indiandentalacademy.com
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and
offering a wide range of dental certified courses in different formats.for more details please visit
www.indiandentalacademy.com
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and
offering a wide range of dental certified courses in different formats.for more details please visit
www.indiandentalacademy.com
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and
offering a wide range of dental certified courses in different formats.for more details please visit
www.indiandentalacademy.com
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and
offering a wide range of dental certified courses in different formats.for more details please visit
www.indiandentalacademy.com
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and
offering a wide range of dental certified courses in different formats.for more details please visit
www.indiandentalacademy.com
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and
offering a wide range of dental certified courses in different formats.for more details please visit
www.indiandentalacademy.com
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and
offering a wide range of dental certified courses in different formats.for more details please visit
www.indiandentalacademy.com
Dentalcasting alloys/certified fixed orthodontic courses by Indian dental aca...Indian dental academy
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and
offering a wide range of dental certified courses in different formats.for more details please visit
www.indiandentalacademy.com
The French Revolution, which began in 1789, was a period of radical social and political upheaval in France. It marked the decline of absolute monarchies, the rise of secular and democratic republics, and the eventual rise of Napoleon Bonaparte. This revolutionary period is crucial in understanding the transition from feudalism to modernity in Europe.
For more information, visit-www.vavaclasses.com
How to Make a Field invisible in Odoo 17Celine George
It is possible to hide or invisible some fields in odoo. Commonly using “invisible” attribute in the field definition to invisible the fields. This slide will show how to make a field invisible in odoo 17.
How to Create Map Views in the Odoo 17 ERPCeline George
The map views are useful for providing a geographical representation of data. They allow users to visualize and analyze the data in a more intuitive manner.
The Indian economy is classified into different sectors to simplify the analysis and understanding of economic activities. For Class 10, it's essential to grasp the sectors of the Indian economy, understand their characteristics, and recognize their importance. This guide will provide detailed notes on the Sectors of the Indian Economy Class 10, using specific long-tail keywords to enhance comprehension.
For more information, visit-www.vavaclasses.com
The Roman Empire A Historical Colossus.pdfkaushalkr1407
The Roman Empire, a vast and enduring power, stands as one of history's most remarkable civilizations, leaving an indelible imprint on the world. It emerged from the Roman Republic, transitioning into an imperial powerhouse under the leadership of Augustus Caesar in 27 BCE. This transformation marked the beginning of an era defined by unprecedented territorial expansion, architectural marvels, and profound cultural influence.
The empire's roots lie in the city of Rome, founded, according to legend, by Romulus in 753 BCE. Over centuries, Rome evolved from a small settlement to a formidable republic, characterized by a complex political system with elected officials and checks on power. However, internal strife, class conflicts, and military ambitions paved the way for the end of the Republic. Julius Caesar’s dictatorship and subsequent assassination in 44 BCE created a power vacuum, leading to a civil war. Octavian, later Augustus, emerged victorious, heralding the Roman Empire’s birth.
Under Augustus, the empire experienced the Pax Romana, a 200-year period of relative peace and stability. Augustus reformed the military, established efficient administrative systems, and initiated grand construction projects. The empire's borders expanded, encompassing territories from Britain to Egypt and from Spain to the Euphrates. Roman legions, renowned for their discipline and engineering prowess, secured and maintained these vast territories, building roads, fortifications, and cities that facilitated control and integration.
The Roman Empire’s society was hierarchical, with a rigid class system. At the top were the patricians, wealthy elites who held significant political power. Below them were the plebeians, free citizens with limited political influence, and the vast numbers of slaves who formed the backbone of the economy. The family unit was central, governed by the paterfamilias, the male head who held absolute authority.
Culturally, the Romans were eclectic, absorbing and adapting elements from the civilizations they encountered, particularly the Greeks. Roman art, literature, and philosophy reflected this synthesis, creating a rich cultural tapestry. Latin, the Roman language, became the lingua franca of the Western world, influencing numerous modern languages.
Roman architecture and engineering achievements were monumental. They perfected the arch, vault, and dome, constructing enduring structures like the Colosseum, Pantheon, and aqueducts. These engineering marvels not only showcased Roman ingenuity but also served practical purposes, from public entertainment to water supply.
Model Attribute Check Company Auto PropertyCeline George
In Odoo, the multi-company feature allows you to manage multiple companies within a single Odoo database instance. Each company can have its own configurations while still sharing common resources such as products, customers, and suppliers.
Unit 8 - Information and Communication Technology (Paper I).pdfThiyagu K
This slides describes the basic concepts of ICT, basics of Email, Emerging Technology and Digital Initiatives in Education. This presentations aligns with the UGC Paper I syllabus.
Students, digital devices and success - Andreas Schleicher - 27 May 2024..pptxEduSkills OECD
Andreas Schleicher presents at the OECD webinar ‘Digital devices in schools: detrimental distraction or secret to success?’ on 27 May 2024. The presentation was based on findings from PISA 2022 results and the webinar helped launch the PISA in Focus ‘Managing screen time: How to protect and equip students against distraction’ https://www.oecd-ilibrary.org/education/managing-screen-time_7c225af4-en and the OECD Education Policy Perspective ‘Students, digital devices and success’ can be found here - https://oe.cd/il/5yV
This is a presentation by Dada Robert in a Your Skill Boost masterclass organised by the Excellence Foundation for South Sudan (EFSS) on Saturday, the 25th and Sunday, the 26th of May 2024.
He discussed the concept of quality improvement, emphasizing its applicability to various aspects of life, including personal, project, and program improvements. He defined quality as doing the right thing at the right time in the right way to achieve the best possible results and discussed the concept of the "gap" between what we know and what we do, and how this gap represents the areas we need to improve. He explained the scientific approach to quality improvement, which involves systematic performance analysis, testing and learning, and implementing change ideas. He also highlighted the importance of client focus and a team approach to quality improvement.
Operation “Blue Star” is the only event in the history of Independent India where the state went into war with its own people. Even after about 40 years it is not clear if it was culmination of states anger over people of the region, a political game of power or start of dictatorial chapter in the democratic setup.
The people of Punjab felt alienated from main stream due to denial of their just demands during a long democratic struggle since independence. As it happen all over the word, it led to militant struggle with great loss of lives of military, police and civilian personnel. Killing of Indira Gandhi and massacre of innocent Sikhs in Delhi and other India cities was also associated with this movement.
Read| The latest issue of The Challenger is here! We are thrilled to announce that our school paper has qualified for the NATIONAL SCHOOLS PRESS CONFERENCE (NSPC) 2024. Thank you for your unwavering support and trust. Dive into the stories that made us stand out!
2. Factors noted to Complete the Analysis
1.The size of all the Permanent teeth anterior
to the first permanent molar.
2.The arch perimeter,
3.Expected changes in the arch perimeter
which may occur with growth and
development.
www.indiandentalacademy.com
3. The Mixed Dentition Analysis helps one to
estimate the amount of spacing or crowding
which would exist for the patient if all the
primary teeth were replaced by their
successors the very day the analysis is done.
It does not predict the amount of natural
decrease in perimeter which may occur
during the transitional period without the loss
of teeth.
www.indiandentalacademy.com
4. Two Strategic Categories-
1.Those in which the size of the unerupted
Cuspids and Premolars are estimated from
measurement of the radiographic image.
2. Those in which the sizes of the Cuspids
and Premolars are derived from knowledge of
the sizes of the permanent teeth already
erupted in the mouth.
www.indiandentalacademy.com
5. Profitt’s Three basic Approaches
1. Estimation from Proportionality Table
Moyers (1967), Tanaka and Johnson.
2. Radiographic Method
Huckaba G.W Analysis(1964).
3. Combined Radiographic–Prediction Table
Hixon and Oldfather (1956)
Modified by Staley and Kerbers (1980)
www.indiandentalacademy.com
6. Moyers Analysis
Best known prediction table is Moyers(1967)
Moyers follow the second strategic condition-
1.It has minimal systematic error and the range
of such error is known.
2.It can be done with equal reliability by the
beginner and the expert as it does not presume
sophisticated clinical judgement.
3.Not time consuming.
www.indiandentalacademy.com
7. 4.Requires no special equipment or
radiographic projections.
5. Although best done on dental casts, it can
be done with reasonable accuracy in the
mouth,
6.May be used for both dental arches
www.indiandentalacademy.com
8. Mandibular Incisor have been choosen-
a.Eruped early in the mouth.
b.Easily measured accurately.
c. Are directly in the midst of most space
management problems.
Maxillary Incisors are not chosen-
Variability in size and their co-relation with
other group of teeth are of lower predicted
value.
www.indiandentalacademy.com
9. Procedure in Mandibular Arch
Measure with tooth measuring gauge or a
pointed gauge,the greatest mesiodistal width
of each of the four mandibular incisors.
www.indiandentalacademy.com
10. Record these values on the mixed dentition
analysis form
www.indiandentalacademy.com
11. Determine the amount of space needed for
alignment of the incisors.
Set the Boleys guage to a value equal to the
sum of the widths of the left central & lateral
incisors .
www.indiandentalacademy.com
12. Place one point of the midline of the crest b/w
the central incisors & let the other point lie
along the line of the dental arch on the left
side.
Mark on the cast the precise point where the
distal surface of the lateral incisor will be
when it has been aligned.
www.indiandentalacademy.com
13. Compute the amount of space available after incisor
alignment.
Measure the distance from the point marked in the
line of the arch to the mesial surface of the first
permanent molar.
This distance is the space available for the Cuspids
& two Bicuspids and for any necessary molar
adjustment after the incisors have been aligned.
www.indiandentalacademy.com
14. Predict the size of the combined width of the
mandibular Cuspids and Bicuspids.
Long method-
An experienced clinician can use 50%
Prediction since it is more precise estimate.
For inexperienced clinicians, they should use
the 75% Prediction for combined widths of
Canines and two Premolars.
www.indiandentalacademy.com
15. Probability table for predicting the sizes of
unerupted Cuspids and bicuspids
Handbook of Orthodontics 4th edition Robert E Moyerswww.indiandentalacademy.com
16. Contd..
Short Method-
less precise method
Add the width of the mandibular incisors and
divide by two.
To the value obtained add
10.5mm Mandibular Cuspids and Bicuspids
11.0mm Maxillary Cuspids and Bicuspids
www.indiandentalacademy.com
17. Whether using the long or short method,
record the estimated values for the combined
cuspids and bicuspids widths in the mixed
dentition analysis form for both sides and
each arch.
Compute the amount of space left in the
arch for molar adjustment by subtracting the
estimated Cuspid and Bicuspids size from
the measured space available in the arch
after alignment of the incisors.
Record these values for each side.
www.indiandentalacademy.com
18. Procedure For maxillary Arch
Procedure is similar to lower arch except-
1. A different probability chart is used for
predicting the upper cuspid and two
Bicuspids sum[ widths]
2. Allowance must be made for Overjet
correction when measuring the space to be
occupied by the aligned incisors.
www.indiandentalacademy.com
19. Probability Table for prediction
Handbook of Orthodontics 4th
edition Robert E Moyerswww.indiandentalacademy.com
20. Although various methods of estimation have
been proposed, Moyers regression scheme
[utilizing the buccal segments and the
mandibular incisors] is widely used because
of its simplicity and ease of application.
Prediction of the size of unerupted canines & Premolars
in a contemporary orthodontic population.
Marvin M Tanaka, Lysle E Johnston
JADA vol 88 April 1974
www.indiandentalacademy.com
21. Tanaka And Johnston Prediction
One half of the
mesiodistal
width
of the four
lower incisors
+ 10.5mm
+ 11.0mm
Estimated width of
mandibular Canine &
Premolars in one
quadrant
Estimated width of
maxillary Canine &
Premolars in one
quadrant
www.indiandentalacademy.com
22. Tanaka And Johnston Prediction
This method has good accuracy despite a
small bias toward overestimating the
unerupted tooth sizes.
Requires neither radiographs nor reference
tables, which makes it very convenient.
www.indiandentalacademy.com
23. Huckaba Analysis
Recommended by Huckaba.G.W in 1964.
Compensates for radiographic enlargement
of tooth image in periapical film.
It is based on the assumption that degree of
magnification for a primary tooth will be the
same as that of its underlying permanent
successor on the same film.
www.indiandentalacademy.com
24. Method
Measure-
1. Width of the primary teeth
on the x-ray film: y
2. Width of its underlying
permanent successor x on
the x ray film
3. Primary tooth on the
cast : y
4. Width of unerupted
permanent tooth is
calculated by x = x y
y
www.indiandentalacademy.com
25. The value obtained for the mandibular incisors
on the cast and those for canines and premolars
on the radiographs were added to provide the
space required.
Space available is obtained by extending the
brass wire from the mesio buccal of 1st
permanent
molar on one side, passing through the incisal
edge of anterior teeth, and to the buccal cusps of
1st
molar on the opposite side.
www.indiandentalacademy.com
26. The difference in the value obtained for
space required and space available is the
amount of discrepancy.
www.indiandentalacademy.com
27. Hixon & Oldfather Analysis
This procedures combines measuremnts
from the dental casts and width
measurements from the peri apical
radiographs.
This method (1956); modified by Staley &
Kerbers(1980) is restricted to the analysis of
the supporting zone in the mandible.
www.indiandentalacademy.com
28. Procedure
Measure the size of unerupted 1st
& 2nd
premolar in one mandibular quadrant from a
peri apical radiograph.
Determination of mesio distal tooth width of
the lower central and lateral incisors on the
study cast to the side of the radiograph.
www.indiandentalacademy.com
29. After adding together both figures, the probable
width of the permanent canine and 1st
& 2nd
premolars for the corresponding quadrant can be
read off in the prediction graph under the column of
the calculated sum total.
www.indiandentalacademy.com
30. X-axis : Mandibular incisor width measured
on the dental cast + total width of 1st
& 2nd
premolar on the peri apical radiograph.
Y-axis : Predicted total width of permanent
mandibular canine and 1st
& 2nd
premolar.
The formula for calculation-
Σ3+4+5=[(Σ 1+2+x4+x5) X 0.7158]+2.1267
www.indiandentalacademy.com
31. Stereophotogrammetric:
A Stereophotogrammetric camera was
developed for non topographic
photogrammetry.
To derive 3 D information from serial cast in
either a graphic or mathematical manner and
to permit the use of computer for analytic
procedure.
Suitable computer programs were designed
for the comparative analysis of geometric
data such as Vault space, Tissue mass,
Surface area, Internal vault slope & Linear
dimensions.
www.indiandentalacademy.com
32. The basic principle of Stereophotogrammetry
is that of binocular vision.
When 2 photographs of the same object are
taken from slightly separated points, they can
be viewed in a manner that will give a 3D
model surface.
It permits a mathematic and geographic
analysis of solid object such as casts.
It can also supply more analytical information
than graphic tracing methods.
www.indiandentalacademy.com
33. Stereophotographic system
showing two model stages and
windows for the placement of
casts on the stage plane .
The stage plane moves laterally
5 inches.
The film magazine accepts a 9 x
9 inch glass plate.
A precise grid is placed on the
face of the stage plane.
The optic of a schnieder Super
Angulon lens with a principle
distance of 152.73mm and an
equivalent focal length of 95mm.
www.indiandentalacademy.com
34. Three problems particularly suitable for this
analysis are:
Cast of patient with unoperated complete
unilateral cleft lip and palate.
Serial cast of patient with Apert’s syndrome.
Comparison of casts treated by rapid expansion
and those treated by conventional full banded
orthodontic appliance therapy.
www.indiandentalacademy.com
35. Occulsograms:
Developed by Burstone in 1969.
Occlusograms are actual sized photographs
of occlusal surface of dental casts.
Tracings of these occlusograms allows the
orthodontist to simulate treatment in occlusal
view.
www.indiandentalacademy.com
36. Techniques:
Photographic method:
Occlusal surface of U & L dental casts are
photographed in a 1:1 ratio and a tracing of the
photograph is made.
Photocopying method:
The casts are photocopied on a photocopier
machine and the occlusal photocopy is used to
obtain a tracing.
www.indiandentalacademy.com
37. Occlusogram procedure:
An occlusogram is a 1:1 reproduction of
occlusal surface of plaster models on a sheet
of acetate tracing paper.
4x5 inch positive film transparencies are
ideal.
These allows occlusograms to be held one
over the other to examine cuspal relationship.
The photographs can be taken either with 35
mm camera and enlarged to 1:1
magnification or with a 4x5 inches Polaroid
camera for 1:1 instant photographic prints.
www.indiandentalacademy.com
38. Photographic prints are ideal for tracing
purposes.
Problem with producing 4x5 inch
transparencies or photographic print is
maintaining the accurate orientation of the
dental cast which must be accurately trimmed
in the centric relation position.
www.indiandentalacademy.com
39. Once the dental cast is trimmed in centric
relation, registration grooves are made.
Both the casts are seated in registration
track in centric relation.
www.indiandentalacademy.com
40. Cast is placed on the registration track on the
Occlusostat as soon as it is ready for
photograph.
Occlusal surface of teeth are flushed with the
leading edge of the occlostat which is also
the focal length of the camera.
www.indiandentalacademy.com
41. For photographing both the upper and lower
dental cast, the recommended lens has a
focal length of 210mm. and can be stopped
down to f :45 for the best depth of the field.
The distance from the leading edge to the
camera lens and from the camera lens to the
film is 42cms. At these settings no
enlargement is found at the level of occulsal
plane.
Exposure time varies from 5-30 secs.
depending on the lighting ( incandescent and
fluorescent ) and the film can then be
processed with X-ray developer and fixer.
www.indiandentalacademy.com
42. Occlusogram tracing:
A sheet of tracing paper is placed over the
photocopy of the cast, rough side up and is
secured at the corners using masking tape.
Tracings are made of both U & L
occlusograms.
R & L should be marked to avoid confusion.
Tracings can be separated by cutting
between the registration lines.
www.indiandentalacademy.com
43. With the U & L occlusogram tracing
registered and secured on the sides, the mid
sagittal registration line can be copied on the
lower tracing.
Growing denture bases can be adjusted so
that they’ll be in their predicted relationship
at the end of treatment periods.
www.indiandentalacademy.com
44. Uses of occlusograms:
Micheal R. Marcotte –demonstrated the
uses of occlusograms in planning orthodontic
treatment.
Determine arch form and width.
Solution to arch length discrepancies.
Presence and extent of skeletal asymmetries.
Anchorage requirements in each quadrant for
extraction cases.
Presence and extent of tooth mass
discrepancies.
www.indiandentalacademy.com
45. To estimate final occlusal relationship.
Estimate tooth movements in all 3 planes.
Determine changes in the cant of occlusal
plane.
Aid in arch wire construction.
Growth prediction with the help of tracing.
Quantifying the treatment progress and
discovering the exact nature of many
orthodontic problem.
www.indiandentalacademy.com
46. Disadvantages:
Time consuming.
Not very precise.
Because of difference in magnification, the
combination of occlusogram with a head
film has been considered difficult and
unreliable.
www.indiandentalacademy.com
47. 3 D Occlusogram Software:
When performing analysis on a scanned
image, the differences in magnification can
easily be accounted for by the computer,
increasing speed, easiness and accuracy.
It was therefore, determined to develop a
user- friendly software that , in addition to
the advantages mentioned by Marcotte, can
also provide the basis for the computerized
appliance design.
www.indiandentalacademy.com
48. The procedure includes :
Image scanning & setting.
Occlusal view processing
Lateral cephalometric
processing
Occlusogram construction
www.indiandentalacademy.com
49. Advantages
Combination of lateral cephalometric image with
the occlusal views of the upper & lower dental
casts complete the 3 dimensional set up of the
patient.
Demonstrates all the treatment possibilities. All
the needed movements of the teeth are clearly
visible on the occlusal views in the 3 planes of
space allowing the design for the “custom made
appliance” & the lateral cephalogram shows the
planned displacement for the molars & the
incisors.
The software can simulate the results of standard
surgical procedures.
Ease in using
Accurate & precise
Rapid www.indiandentalacademy.com
50. Holograms
The first Hologram was produced by Leith and
upatnieks in 1964.
Holography is a photographic technique for
recording and reconstructing images in such a way
that the 3D aspect of an object can be obtained. The
recorded images is called a “Hologram”.
Holography uses laser light to reproduce very high
quality 3D images of a cast.
It permits 3D model analysis, super impositions and
storage.
www.indiandentalacademy.com
51. Holograms in Orthodontist:
AJODO oct 1995
SYSTEM:
1. Holocamera
2. Automatic Developer
3. illumination and measuring system
www.indiandentalacademy.com
52. Holocamera
Easy to handle.
The model being
photographed is
placed on glass plate
for exposure.
The laser beam used
in the camera is
divergent.
www.indiandentalacademy.com
53. Automatic Developer
Developed to expose
plates without assistance.
Consists of series of trays
that contain the various
chemicals used, a
mechanical engine that
controls the movements of
the holder in which plates
can be placed.
30 plates can be
developed simultaneously.
The holder carries the
plate from tray to tray
each having a different
function during exposure.
www.indiandentalacademy.com
54. Developing, Water rinsing ,Bleaching and
Wetting procedure are required to develop an
exposed holographic plate.
During each steps ,the holder is kept inside the
corresponding tray as long as time indicates.
The finished hologram will be either red or green
depending on the bleach used.
www.indiandentalacademy.com
55. Measurement System
Illumination element:
Halogen lamp: to
illuminate the hologram.
Analysis or measuring
element: Plate holder
mounted on an x-y-z
positioner. The z
micropositioner has an
optical fiber which is
connected to a laser
diode that projects a
small red spot light
used for depth
measurement.
www.indiandentalacademy.com
56. Orthodontic Applications
Measurement of incisor intrusion.
Study the effects of high pull headgear.
Tooth position measurements.
Study the effect of max. expansion on facial
skeleton.
Study the effect of class2 elastics on bone
displacement.
Study the effect of cervical headgear on
maxilla.
Facial & dental arch symmetry.
Determine the centre of rotation produced by
orthodontic forces.
Lower incisor space analysis.
www.indiandentalacademy.com
57. Advantage
Convenient, low bulk
Resistant to almost all destructive agents apart
from fire. These films may be scratched or bent
or covered in dust without interfering with the
latent image.
Superimposition of images is possible, thus
detection of any changes & tooth movement are
possible.
Holographic image can be measured in 3
dimensions.
Ease in storage, transportation
Cost similar to conventional photography.
www.indiandentalacademy.com
58. Disadvantage
Inability to place the holograms immediately
next to the patient’s mouth to make side by
side comparisons.
Cannot be adjusted once made.
Incorrect occlusion of the models when the
holograms are being made.
www.indiandentalacademy.com
59. Photocopies of the study models
Can be used for :
1) Comparing pre and post treatment arch forms
2) Checking original tooth rotations or the initial
arch form during treatment
3) Communicating with other practitioner about
characteristic of the malocclusion .
4) Producing occlusograms for demonstration
purpose
www.indiandentalacademy.com
60. These photocopies may be less
precise for :
1) Measuring arch length
2) Producing occlusograms for
space analysis.
www.indiandentalacademy.com
61. COMPUTERIZED ANALYIS DENTAL CASTS
OSCOPO
Oscopo is a computer program for the
Oscilloscopic Simulation for Correcting
Orthodontically , Problems in Occlusion.
It was developed by Robert H. Biggerstaff in
1970.
It is based on a two dimensional
representation of the upper and lower
dentition as photographed from an occlusal
view.
www.indiandentalacademy.com
62. OSCOPO is the computer method for
measuring, analyzing and evaluating the
dimensional vectors involved in
orthodontic correction.
It is a visual method for realigning the
dental elements involved in the translation
from a malocclusion to a normal occlusion
in the individual case.
www.indiandentalacademy.com
63. OSCOPO gives a top view of the tooth images
of the mandibular and maxillary dental casts as
projected to the occlusal plane while recording
the patients usual occluding relationship.
Other portions of the program permit
translational, rotational simulations of the image
of a tooth or a group of tooth changing the
occlusal pattern as originally seen on the dental
casts or oscilloscope.
www.indiandentalacademy.com
64. OSCOPO does not have the potential for
discriminating between Apical or Tilting
movement.
It does however represent graphically the
end result of movements produced in the
two defined planes of space.
www.indiandentalacademy.com
65. Digital Study Models
Computerized software are now capable of
scanning study models and storing the
scanned data as 3D images.
3D digital study models are designed to
over come the problems –
Storage and Retrieval
Diagnostic Versatility
Transferability
Durability
www.indiandentalacademy.com
66. Application Of 3D Imaging Of Teeth
Archiving Study Cast
Documentation of treatment progress and
communication between professional
colleagues is made easy.
Can examine intra & inter arch and
transverse relationships between U&L arches
Treatment objectives and planning can be
created by using “Virtual set-up” of
orthodontic appliance.
www.indiandentalacademy.com
67. Simulation of space following extraction,
tooth uprighting or incisor retraction can be
easily shown.
3D prefabrication of archwires using specific
robotics after setting up brackets position on
the dental arches.
Construction of 3D “ Aligners”- The Invisalign
technology.
www.indiandentalacademy.com
68. e-MODELS-3D Digital dental models
using laser technology- J.C.O (2)-2003
Three dimensional digital study model.
Methods of producing digital models:
Destructive imaging: Removes the part of
the cast ,a little at a time ,while it is being
imaged.
Non destructive imaging: Uses structural
light ,laser light or x-rays to image while
leaving the original cast intact.
www.indiandentalacademy.com
69. Constructed through a laser
scanning process that
digitally maps the geometry
of a patient’s dental
anatomy to a high resolution
3D digital image with an
accuracy of +. 01mm.A laser
stripe is projected onto the
surface of the plaster cast &
a digital camera is used to
analyze distortions in the
stripe. The plaster cast is
oriented on all axes to
expose all its surfaces for
scanning.
e - models:
www.indiandentalacademy.com
70. This process produces 3D vertices that
are connected into thousands of
triangles to form the 3D image.
The software then displays the e-model
on the computer screen by assigning
color shades to each triangle based on
its relative orientation to a digital light
source. This results in a high-resolution
3D image that can be viewed measured
& manipulated on the computer screen
as if the cast is in your hand.
www.indiandentalacademy.com
71. ADVANTAGES OF e-model
Measurements can be made in any plane or orientation.
Various analysis such as Bolton’s analysis, arch width &
length analysis can be done.
Cross-sectional tools allow e-models to be sliced in any
vertical or horizontal plane to check symmetry, overjet,
overbite & complete measurements at any location.
Permits analysis of occlusal relationships.
Improves accuracy & efficiency of orthodontic diagnosis,
treatment planning & bracket placement.
Midline analysis (skeletal or dental asymmetries can be
evaluated).
Mock surgeries & presurgical evaluation can be done.
Record keeping
Ease in storage
www.indiandentalacademy.com
72. e-plan
Latest innovation in 3D
treatment planning.
Simulates multiple treatment
options to help determine the
most effective treatment plan.
Enables the clinician to simulate
tooth rotations ,movements &
extractions with a click of the
mouse.
They allow pts. to watch the
movement of their own teeth
from a malocclusion view to a
post treatment view.
Effective communication tool for
pts., their families & referring
dentists.
www.indiandentalacademy.com
73. Ortho CAD TM Technology
OrthoCADTM software has been developed by
CADENT, Inc. (Computer Aided DENTistry,
Fairview, NJ) to enable the orthodontist to view,
manipulate, measure and analyze 3D digital study
models easily and quickly.
Alginate impressions of the maxillary and
mandibular dentitions are then downloaded
manually or automatically from the world wide
website using a utility called OrthoCAD
downloader.
The average file size for each 3D model is 3 Mb.
www.indiandentalacademy.com
74. The operator can
browse and view the
models separately
and together from
any direction and in
any desired
magnification on
screen.
www.indiandentalacademy.com
75. The software comes with
several diagnostics tools
such as:
Measurement analyzes
(e.g. Bolton analysis, arch
width and length analysis )
Midline analysis (The
ability to split the model
sagittally or transversely for
better compressions)
Overbite and Over jet
analysis.
www.indiandentalacademy.com
76. The step in orthoCADTM
virtual
set-up
1. Choose your preferred brackets,
bands and wires from the available
straight wire systems listed.
2. Incisors are positioned, as well as
molars.
3&4. The orthodontists should slide
maxillary and mandibular teeth into
their proper positions or correct the
position of the brackets themselves
to achieve better inter-and intra-arch
relationships.
5. The sagittal inter-arch relationship
should be double-checked.
6. Evaluate the transverse
relationship.
7. Molar position and jaw closure are
adjusted to make sure that the
correct form of treatment is chosen.
www.indiandentalacademy.com
77. Align Technology
The Invisalign appliance for Orthodontic tooth
movement was developed in 1998.
It is the ‘invisible’ way to straighten teeth into
a perfect occlusion using thin, clear, overlay
sequential appliance.
www.indiandentalacademy.com
78. Procedure
(A) Initial treatment planning with patients’
photographs and radiographs are sent to
Invisalign lab.
(b) Impressions are converted into plaster
models.
(c ) In lab, models are first coated with
protective shells, & encased in a mixture of
resin and a hardener.
(d) After chemical setting, the become blocks
of the hardened resin with many plaster
models inside. Each tray is placed in a
destructive scanning machine.
(e) Each 3D models is constructed from about
300 2D scans.
(f) Once the teeth are separated and re-
assembled back into the arches, the designers
create a final set-up of what the patient’s teeth
will look like when the treatment is completed.
(g) For each stereolithographic constructed
model a clear invisalign aligner is created by
heat.
(h) These aligners are trimmed, polished,
cleaned and finally sent to the prescribing
orthodontist.
www.indiandentalacademy.com
79. Conclusion
There are numerous model analysis based on
different criterias.
Now it is left to the orthodontist to accept which
ever analysis he feels best suits his group of
population and his diagnosis and treatment
planning.
The basis remains the same only the ways to
express it differs. So it does not matter which
analysis you follow but what matter is that how
efficiently you imply the results of it to your treatment
planning and do justice to your patient.
www.indiandentalacademy.com
80. References
ORTHODONTICS
PRINCIPLES AND PRACTICE,
- GRABER T.M.
Handbook of orthodontics.
- ROBERT E. MOYERS.
Contemporary orthodontics.
- WILLIAM R. PROFFIT.
Orthodontics
current principles and concepts.
- THOMAS M. GRABER & Vanarsdall
www.indiandentalacademy.com