This document discusses how micro-grids can power agricultural loads and how agricultural loads can improve the economic viability of micro-grids. It provides examples of Powering Agriculture innovators installing micro-grids that power irrigation pumps, processing equipment, and cold storage. The document also analyzes different renewable energy sources for micro-grids and notes that solar hybrid systems combining solar with biomass or diesel generators can reduce costs compared to solar-only systems. Agricultural waste can also be used as biomass fuel to generate electricity and create additional income for farmers.
The document summarizes a session on hydro power in the 21st century focusing on emerging markets. It discusses India's potential for hydro power development given its massive water resources and growing energy needs. Specifically, it provides examples of past, present and future hydro power projects in India including the 1500 MW Nathpa Jhakri project completed in the past, the ongoing 1200 MW Teesta Stage III project, and a future planned 1750 MW Demwe Lower project. It emphasizes the importance of hydro power for India's energy security and sustainable development given the limited nature of fossil fuel resources.
An energy crisis occurs when there is a bottleneck in the supply of energy resources to an economy. Demand for energy has greatly increased due to industrialization and population growth, but supply cannot meet demand. This can be caused by market failures, infrastructure issues, disruptions or planned outages. Alternative energy sources like biomass are gaining popularity in response to concerns over petroleum. Biomass currently contributes significantly to India's energy supply but faces challenges in becoming a major competitor to fossil fuels. Initiatives like Husk Power Systems show promise in using biomass waste for rural electrification in India.
1. The document proposes a decentralized green hydrogen infrastructure as an emerging energy storage solution. It would allow the electric power market to evolve beyond its current limitations of lacking sustainable and durable energy storage capacity.
2. Green hydrogen produced from electrolysis using renewable energy could provide grid-scale energy storage. The stored hydrogen could be transported to sites for power generation using fuel cells or combustion, providing localized energy security.
3. By overcoming the "duck curve" issue where renewable energy generation does not match grid demand, green hydrogen could maximize the value of renewable investments and correct utilities' need to throttle renewable power purchase agreements.
Renewable Energy Integrated Microgrid for Rural Electrification and Productiv...Muhammad Taheruzzaman
This document discusses renewable energy integrated microgrids for rural electrification in developing countries like Bangladesh. It analyzes four configurations of microgrid systems with different combinations of biomass generators, solar home systems, and small wind turbines to determine the optimal design. Case 3, with a 10kW biomass generator, 25 solar home systems totaling 2.5kW of solar, and 2 small wind turbines producing a combined 2kW, is identified as the most economical solution for a community of 50 households and small businesses. The system would obtain 78% of its energy from biomass, 13% from solar, and 9% from wind.
TiE Bangalore UNDP Energy programme and EnterpreneurshipTiE Bangalore
A Talk by Dr. S.N. Srinivas on on some of the project initiatives at UNDP, their implications to policy making, opportunities it has created/ can create for entrepreneurs.
This document provides an overview of renewable energy in India. It details that renewable energy accounts for about 30% of India's primary energy supply, with solar and wind having the largest potential at 100,000 MW each. As of 2014, India had over 33,000 MW of installed renewable grid-connected capacity, with wind being the largest contributor. The government provides various incentives like generation-based incentives for wind and viability gap funding for solar to encourage renewable energy development and help meet the national renewable purchase obligation.
Dr shelat conference climate change and groundwaterJaspreet Aulakh
The document summarizes a national seminar on climate change, water resource management, and livelihood adaptation. It discusses how climate change will impact hydrology and agriculture in India, with more intense rainfall, droughts, and floods. It is noted that groundwater irrigation has become widespread in India since the 1960s. The document outlines how power subsidies have driven unsustainable groundwater use, and presents strategies like managed aquifer recharge and solar pumps connected to the grid as ways to adapt to climate change impacts while mitigating further groundwater depletion. Connecting many solar pumps to the grid could help India meet its renewable energy targets while saving on subsidies and reducing groundwater extraction.
The 8th Insight is out ! A full article about microgrids, an energy revolution.
Our interviews with Sujay Malve, Founder and CEO at Canopy Power, and with Sébastien de Peretti, Business Developer at CMR Group, and Finergreen's latest news !
The document summarizes a session on hydro power in the 21st century focusing on emerging markets. It discusses India's potential for hydro power development given its massive water resources and growing energy needs. Specifically, it provides examples of past, present and future hydro power projects in India including the 1500 MW Nathpa Jhakri project completed in the past, the ongoing 1200 MW Teesta Stage III project, and a future planned 1750 MW Demwe Lower project. It emphasizes the importance of hydro power for India's energy security and sustainable development given the limited nature of fossil fuel resources.
An energy crisis occurs when there is a bottleneck in the supply of energy resources to an economy. Demand for energy has greatly increased due to industrialization and population growth, but supply cannot meet demand. This can be caused by market failures, infrastructure issues, disruptions or planned outages. Alternative energy sources like biomass are gaining popularity in response to concerns over petroleum. Biomass currently contributes significantly to India's energy supply but faces challenges in becoming a major competitor to fossil fuels. Initiatives like Husk Power Systems show promise in using biomass waste for rural electrification in India.
1. The document proposes a decentralized green hydrogen infrastructure as an emerging energy storage solution. It would allow the electric power market to evolve beyond its current limitations of lacking sustainable and durable energy storage capacity.
2. Green hydrogen produced from electrolysis using renewable energy could provide grid-scale energy storage. The stored hydrogen could be transported to sites for power generation using fuel cells or combustion, providing localized energy security.
3. By overcoming the "duck curve" issue where renewable energy generation does not match grid demand, green hydrogen could maximize the value of renewable investments and correct utilities' need to throttle renewable power purchase agreements.
Renewable Energy Integrated Microgrid for Rural Electrification and Productiv...Muhammad Taheruzzaman
This document discusses renewable energy integrated microgrids for rural electrification in developing countries like Bangladesh. It analyzes four configurations of microgrid systems with different combinations of biomass generators, solar home systems, and small wind turbines to determine the optimal design. Case 3, with a 10kW biomass generator, 25 solar home systems totaling 2.5kW of solar, and 2 small wind turbines producing a combined 2kW, is identified as the most economical solution for a community of 50 households and small businesses. The system would obtain 78% of its energy from biomass, 13% from solar, and 9% from wind.
TiE Bangalore UNDP Energy programme and EnterpreneurshipTiE Bangalore
A Talk by Dr. S.N. Srinivas on on some of the project initiatives at UNDP, their implications to policy making, opportunities it has created/ can create for entrepreneurs.
This document provides an overview of renewable energy in India. It details that renewable energy accounts for about 30% of India's primary energy supply, with solar and wind having the largest potential at 100,000 MW each. As of 2014, India had over 33,000 MW of installed renewable grid-connected capacity, with wind being the largest contributor. The government provides various incentives like generation-based incentives for wind and viability gap funding for solar to encourage renewable energy development and help meet the national renewable purchase obligation.
Dr shelat conference climate change and groundwaterJaspreet Aulakh
The document summarizes a national seminar on climate change, water resource management, and livelihood adaptation. It discusses how climate change will impact hydrology and agriculture in India, with more intense rainfall, droughts, and floods. It is noted that groundwater irrigation has become widespread in India since the 1960s. The document outlines how power subsidies have driven unsustainable groundwater use, and presents strategies like managed aquifer recharge and solar pumps connected to the grid as ways to adapt to climate change impacts while mitigating further groundwater depletion. Connecting many solar pumps to the grid could help India meet its renewable energy targets while saving on subsidies and reducing groundwater extraction.
The 8th Insight is out ! A full article about microgrids, an energy revolution.
Our interviews with Sujay Malve, Founder and CEO at Canopy Power, and with Sébastien de Peretti, Business Developer at CMR Group, and Finergreen's latest news !
Renewable energy sources – policies of indiaAngu Ramesh
This document summarizes India's policies around renewable energy sources. It notes that India has a large potential for renewable energy but also currently relies heavily on fossil fuels. To address this, the Indian government created the Ministry of Non-Conventional Energy Sources to promote renewable energy. The ministry has implemented various policies to encourage renewable development, set renewable energy targets, and integrate renewables into the grid. India has significant potential from various renewable sources like solar, wind, biomass, and small hydro according to the document.
The document discusses the potential for solar and wind energy to power the future of the Philippines. It notes that a single wind turbine can power 600 homes and that solar power is the most abundant energy source on Earth. It outlines the Philippines' goals of reaching 3 GW of solar capacity by 2022 and challenges such as high upfront costs. However, incentives like tax breaks and priority grid access could help overcome challenges to the renewable transition.
Montecito Community Microgrid Initiative Public MeetingClean Coalition
Craig Lewis, Executive Director for the Clean Coalition, presented at the Montecito Community Microgrid Initiative Public Meeting, which took place November 14, 2018 in Santa Barbara, CA.
The document provides an overview of the energy industry, including its various sectors such as oil, gas, coal, electricity, and renewables. It discusses topics like energy economics, demand management, environmental impacts, policies, security, development, transportation, and crises. The energy industry comprises fuel extraction, refining, distribution, and sales across many areas and plays a crucial role in modern society.
The document summarizes initiatives several MGM Resorts International properties have undertaken to increase energy efficiency and sustainability, such as installing variable frequency drives, improving lighting efficiency, increasing recycling rates, and implementing renewable energy projects. These projects have resulted in annual savings of over $5 million and 50 million kWh of energy across MGM properties.
Rural electrification has played an important role in India's economic development but progress has fallen short of targets. Over the decades since independence in 1947, millions of villages have gained access to electricity, with the number of electrified villages growing from 1,500 in 1947 to over 493,000 by 2009. However, targets set in various five-year plans to accelerate rural electrification were often missed. More recently, programs like the Rajiv Gandhi Grameen Vidyutikaran Yojana aimed to fully electrify India's estimated 600,000 villages and provide electricity access to all rural households by 2012, but this goal was not achieved either. Continued efforts are needed to close the remaining gap and fulfill the
Jyoti Gram Yojana and Rural electrification in north eastern states of indiaASHISH SINGH
This Presentation is covers the Jyoti Gram Yojana of Gujarat State and how we can implement JGY for rural electrification in North Eastern States of India
Hydro power or hydroelectricity refers to the conversion of energy from flowing water into electricity. It is considered a renewable energy source because the water cycle is constantly renewed by the sun.
Introduction To India's Energy And Proposed Rural Solar-PV Electrification Najib Altawell
The document discusses rural electrification in India through solar photovoltaic (PV) systems. It notes that over 400 million Indians lack access to electricity and many rely on biomass for cooking and kerosene for lighting. The government aims to achieve universal electrification by 2022 but has so far only met 1% of rural energy needs through renewables. The document advocates for solar PV as a way to bridge India's electricity gap and outlines various government incentives to promote solar development and installation of over 2 MW of solar capacity to date.
This document provides an overview of renewable energy potential and utilization in India. It discusses various renewable energy sources including wind, solar, hydro, and biomass. India has significant potential from renewable sources given its ample sunshine, wind resources, and biomass availability. The document outlines India's growing installed capacity of renewable energy, with wind being the largest source currently. It also discusses some of the key regions and states leading renewable energy development in India. The Ministry of New and Renewable Energy plays a key role in promoting renewable energy growth and development in India.
International Journal of Engineering and Science Invention (IJESI) is an international journal intended for professionals and researchers in all fields of computer science and electronics. IJESI publishes research articles and reviews within the whole field Engineering Science and Technology, new teaching methods, assessment, validation and the impact of new technologies and it will continue to provide information on the latest trends and developments in this ever-expanding subject. The publications of papers are selected through double peer reviewed to ensure originality, relevance, and readability. The articles published in our journal can be accessed online.
This document summarizes an article about India's energy policy and the need to promote renewable energy sources. It discusses how India has vast renewable energy resources and the government has implemented various policies and incentives to promote greater renewable energy deployment. The key challenges are India's limited fossil fuel reserves, high fuel transportation costs, aging conventional power plants, need to rationalize power tariffs, and reduce transmission and distribution losses in the power sector. The government is aiming to source 10% of additional grid power from renewable sources by 2012 to help address these challenges in a sustainable manner.
1. Renewable energy, especially solar, wind, hydro, and biomass, has significant potential in India given its natural resources and government incentives.
2. India has an installed renewable energy capacity of over 62 GW as of 2018 and aims to achieve 175 GW of renewable capacity by 2022 to meet its energy needs in a sustainable manner.
3. Key renewable technologies being developed in India include solar power, with a target of 100 GW by 2022, as well as wind, hydro, and biomass energy. Continued research and policy support can help realize India's renewable energy goals.
India has set capacity addition targets of 62,374 MW, 79,690 MW and 79,200 MW for the 11th, 12th and 13th five-year plans respectively. Thermal power remains India's most important energy source but there is still a supply-demand gap that has been increasing. The document discusses various options and challenges for increasing domestic coal production and supply as well as increasing imports to help meet demand. Demand side management including smart grids and demand response are presented as potential solutions to optimize resource utilization and strengthen energy security.
The New Role of Renewable Energy Systems In Developing GCC Electricity MarketCSCJournals
Due to rising and fluctuating oil prices, the author proposes greater utilization of solar and renewable energy systems in GCC countries. Specifically, the large investments in real estate could support infrastructure for roof-mounted solar panels, supplying some electricity demands and creating a circular power distribution network. New regulations would be needed to integrate these systems and provide incentives for homeowners, while also creating jobs and reducing environmental impacts. Overall, the rising costs of oil and falling prices of solar collection systems indicate renewable energy can increasingly compete with conventional sources in the GCC region.
Electricity and power consumption in india (1)Anirudh Sharma
The document discusses electricity generation and power development in India. It notes that India has seen rapid growth in electricity generation capacity over the last 20 years, but still faces shortages. The main sources of electricity in India are thermal, hydro, nuclear, solar, wind, biomass, geothermal, and tidal/wave power. States have varying levels of surplus or deficit in power availability.
The need for expanded nuclear energy is urgent. Global energy demand is expected to grow by at least 50% by 2035, with electric demand in the developing world expected to triple.
Presently, more than one billion people completely lack electricity access and billions more consume one tenth or less of the electricity per capita consumed in the OECD. Much of that supply is intermittent.
At the same time, 81% of the world’s energy, and two thirds of the world’s electricity, is derived from fossil fuels, while emissions from fossil fuel combustion are a major factor driving global climate change.
1) The document discusses microgrids which integrate distributed energy resources to provide electricity for local areas. Microgrids can operate connected to the main power grid or independently.
2) Microgrids offer economic, technical, and environmental benefits over conventional power systems. They improve access to electricity, lower costs, increase revenue opportunities, and reduce emissions.
3) The technical aspects of microgrids include energy resources, power electronics, control systems, and the ability to operate in both grid-connected and isolated modes. Microgrids provide reliable local power generation and energy management.
Feasibility Study on Battery Energy Storage System for Mini gridijtsrd
Mini grids defined as a set of electricity generators and battery energy storage system is connected between the load side and the source side. A key feature of mini grids is that they can operate autonomously with no connection to a centralized grid. Gaw Cho village, Sagaing Division, Myanmar is selected because of the higher potential of solar energy. This paper presents the unbalance condition between the load side and the source side because the solar energy is changing under weather condition. Diesel generator is used as a backup system for this proposed area but the operation of the fuel cost increased for long term period. Here, battery energy storage system is used as a secondary supplier to balance between them. This paper focus on to used HOMER software for pointing out the result outcome not be oversizing the system requirement. Using real time data, storage characteristics and HOMER simulations, optimal sizing for both approaches were established. A well design min grid offered available tool for the rural electrification system. Nang Saw Yuzana Kyaing | June Tharaphe Lwin | Chris Tie Lin "Feasibility Study on Battery Energy Storage System for Mini-grid " Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019, URL: https://www.ijtsrd.com/papers/ijtsrd27863.pdfPaper URL: https://www.ijtsrd.com/engineering/electrical-engineering/27863/feasibility-study-on-battery-energy-storage-system-for-mini-grid-/nang-saw-yuzana-kyaing
Renewable energy sources – policies of indiaAngu Ramesh
This document summarizes India's policies around renewable energy sources. It notes that India has a large potential for renewable energy but also currently relies heavily on fossil fuels. To address this, the Indian government created the Ministry of Non-Conventional Energy Sources to promote renewable energy. The ministry has implemented various policies to encourage renewable development, set renewable energy targets, and integrate renewables into the grid. India has significant potential from various renewable sources like solar, wind, biomass, and small hydro according to the document.
The document discusses the potential for solar and wind energy to power the future of the Philippines. It notes that a single wind turbine can power 600 homes and that solar power is the most abundant energy source on Earth. It outlines the Philippines' goals of reaching 3 GW of solar capacity by 2022 and challenges such as high upfront costs. However, incentives like tax breaks and priority grid access could help overcome challenges to the renewable transition.
Montecito Community Microgrid Initiative Public MeetingClean Coalition
Craig Lewis, Executive Director for the Clean Coalition, presented at the Montecito Community Microgrid Initiative Public Meeting, which took place November 14, 2018 in Santa Barbara, CA.
The document provides an overview of the energy industry, including its various sectors such as oil, gas, coal, electricity, and renewables. It discusses topics like energy economics, demand management, environmental impacts, policies, security, development, transportation, and crises. The energy industry comprises fuel extraction, refining, distribution, and sales across many areas and plays a crucial role in modern society.
The document summarizes initiatives several MGM Resorts International properties have undertaken to increase energy efficiency and sustainability, such as installing variable frequency drives, improving lighting efficiency, increasing recycling rates, and implementing renewable energy projects. These projects have resulted in annual savings of over $5 million and 50 million kWh of energy across MGM properties.
Rural electrification has played an important role in India's economic development but progress has fallen short of targets. Over the decades since independence in 1947, millions of villages have gained access to electricity, with the number of electrified villages growing from 1,500 in 1947 to over 493,000 by 2009. However, targets set in various five-year plans to accelerate rural electrification were often missed. More recently, programs like the Rajiv Gandhi Grameen Vidyutikaran Yojana aimed to fully electrify India's estimated 600,000 villages and provide electricity access to all rural households by 2012, but this goal was not achieved either. Continued efforts are needed to close the remaining gap and fulfill the
Jyoti Gram Yojana and Rural electrification in north eastern states of indiaASHISH SINGH
This Presentation is covers the Jyoti Gram Yojana of Gujarat State and how we can implement JGY for rural electrification in North Eastern States of India
Hydro power or hydroelectricity refers to the conversion of energy from flowing water into electricity. It is considered a renewable energy source because the water cycle is constantly renewed by the sun.
Introduction To India's Energy And Proposed Rural Solar-PV Electrification Najib Altawell
The document discusses rural electrification in India through solar photovoltaic (PV) systems. It notes that over 400 million Indians lack access to electricity and many rely on biomass for cooking and kerosene for lighting. The government aims to achieve universal electrification by 2022 but has so far only met 1% of rural energy needs through renewables. The document advocates for solar PV as a way to bridge India's electricity gap and outlines various government incentives to promote solar development and installation of over 2 MW of solar capacity to date.
This document provides an overview of renewable energy potential and utilization in India. It discusses various renewable energy sources including wind, solar, hydro, and biomass. India has significant potential from renewable sources given its ample sunshine, wind resources, and biomass availability. The document outlines India's growing installed capacity of renewable energy, with wind being the largest source currently. It also discusses some of the key regions and states leading renewable energy development in India. The Ministry of New and Renewable Energy plays a key role in promoting renewable energy growth and development in India.
International Journal of Engineering and Science Invention (IJESI) is an international journal intended for professionals and researchers in all fields of computer science and electronics. IJESI publishes research articles and reviews within the whole field Engineering Science and Technology, new teaching methods, assessment, validation and the impact of new technologies and it will continue to provide information on the latest trends and developments in this ever-expanding subject. The publications of papers are selected through double peer reviewed to ensure originality, relevance, and readability. The articles published in our journal can be accessed online.
This document summarizes an article about India's energy policy and the need to promote renewable energy sources. It discusses how India has vast renewable energy resources and the government has implemented various policies and incentives to promote greater renewable energy deployment. The key challenges are India's limited fossil fuel reserves, high fuel transportation costs, aging conventional power plants, need to rationalize power tariffs, and reduce transmission and distribution losses in the power sector. The government is aiming to source 10% of additional grid power from renewable sources by 2012 to help address these challenges in a sustainable manner.
1. Renewable energy, especially solar, wind, hydro, and biomass, has significant potential in India given its natural resources and government incentives.
2. India has an installed renewable energy capacity of over 62 GW as of 2018 and aims to achieve 175 GW of renewable capacity by 2022 to meet its energy needs in a sustainable manner.
3. Key renewable technologies being developed in India include solar power, with a target of 100 GW by 2022, as well as wind, hydro, and biomass energy. Continued research and policy support can help realize India's renewable energy goals.
India has set capacity addition targets of 62,374 MW, 79,690 MW and 79,200 MW for the 11th, 12th and 13th five-year plans respectively. Thermal power remains India's most important energy source but there is still a supply-demand gap that has been increasing. The document discusses various options and challenges for increasing domestic coal production and supply as well as increasing imports to help meet demand. Demand side management including smart grids and demand response are presented as potential solutions to optimize resource utilization and strengthen energy security.
The New Role of Renewable Energy Systems In Developing GCC Electricity MarketCSCJournals
Due to rising and fluctuating oil prices, the author proposes greater utilization of solar and renewable energy systems in GCC countries. Specifically, the large investments in real estate could support infrastructure for roof-mounted solar panels, supplying some electricity demands and creating a circular power distribution network. New regulations would be needed to integrate these systems and provide incentives for homeowners, while also creating jobs and reducing environmental impacts. Overall, the rising costs of oil and falling prices of solar collection systems indicate renewable energy can increasingly compete with conventional sources in the GCC region.
Electricity and power consumption in india (1)Anirudh Sharma
The document discusses electricity generation and power development in India. It notes that India has seen rapid growth in electricity generation capacity over the last 20 years, but still faces shortages. The main sources of electricity in India are thermal, hydro, nuclear, solar, wind, biomass, geothermal, and tidal/wave power. States have varying levels of surplus or deficit in power availability.
The need for expanded nuclear energy is urgent. Global energy demand is expected to grow by at least 50% by 2035, with electric demand in the developing world expected to triple.
Presently, more than one billion people completely lack electricity access and billions more consume one tenth or less of the electricity per capita consumed in the OECD. Much of that supply is intermittent.
At the same time, 81% of the world’s energy, and two thirds of the world’s electricity, is derived from fossil fuels, while emissions from fossil fuel combustion are a major factor driving global climate change.
1) The document discusses microgrids which integrate distributed energy resources to provide electricity for local areas. Microgrids can operate connected to the main power grid or independently.
2) Microgrids offer economic, technical, and environmental benefits over conventional power systems. They improve access to electricity, lower costs, increase revenue opportunities, and reduce emissions.
3) The technical aspects of microgrids include energy resources, power electronics, control systems, and the ability to operate in both grid-connected and isolated modes. Microgrids provide reliable local power generation and energy management.
Feasibility Study on Battery Energy Storage System for Mini gridijtsrd
Mini grids defined as a set of electricity generators and battery energy storage system is connected between the load side and the source side. A key feature of mini grids is that they can operate autonomously with no connection to a centralized grid. Gaw Cho village, Sagaing Division, Myanmar is selected because of the higher potential of solar energy. This paper presents the unbalance condition between the load side and the source side because the solar energy is changing under weather condition. Diesel generator is used as a backup system for this proposed area but the operation of the fuel cost increased for long term period. Here, battery energy storage system is used as a secondary supplier to balance between them. This paper focus on to used HOMER software for pointing out the result outcome not be oversizing the system requirement. Using real time data, storage characteristics and HOMER simulations, optimal sizing for both approaches were established. A well design min grid offered available tool for the rural electrification system. Nang Saw Yuzana Kyaing | June Tharaphe Lwin | Chris Tie Lin "Feasibility Study on Battery Energy Storage System for Mini-grid " Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019, URL: https://www.ijtsrd.com/papers/ijtsrd27863.pdfPaper URL: https://www.ijtsrd.com/engineering/electrical-engineering/27863/feasibility-study-on-battery-energy-storage-system-for-mini-grid-/nang-saw-yuzana-kyaing
This document provides an overview of India's energy sector. It discusses that India currently meets 71% of its energy demand through domestic production, with 41% coming from thermal power plants. While renewable energy sources like solar, wind and biomass are growing, they still only make up a small portion of India's total energy mix. The document also outlines various government policies and initiatives that aim to increase renewable energy usage and reform the energy sector to better meet India's growing demand in a sustainable manner.
A comprehensive study on battery energy storage systems for renewable energyIRJET Journal
The document discusses battery energy storage systems for renewable energy. It begins by noting the increasing global demand for energy and dependence on fossil fuels, which are limited and cause pollution. Renewable energy sources like solar and wind can help generate clean electricity but storing this energy for later use poses a challenge. Battery storage systems can address this by storing renewable energy for applications like electric vehicles and the grid. The document then examines different types of battery energy storage technologies, classifications of electric energy storage systems, and the use of batteries specifically for renewable energy storage and electric vehicles.
Final ub role of energy efficiency in smart and sustainable Usha Batra
The document discusses the role of energy efficiency in smart and sustainable development in India. It makes three key points:
1) Energy efficiency and conservation are essential for India's smart growth and development given its increasing energy demands and imports but also to reduce pollution and meet climate targets. Significant potential exists for energy savings across sectors like industry, buildings, transportation, and agriculture.
2) The Government of India has implemented several initiatives to promote energy efficiency such as building codes, performance standards, audits, awards, and renewable energy targets. However, challenges remain in meeting energy needs while balancing environmental and economic factors.
3) Transitioning to sustainable energy sources like solar, wind, biomass and increasing renewable capacities will be
This document discusses low-power agro-processing technologies that can help smallholder farmers. It notes that conventional agro-processing equipment is often too large for small farms, while manual processing is time-consuming. Small-scale solar, biomass, and biogas-powered equipment provides a solution by matching communities' needs and allowing farmers to process locally. This can generate income, reduce losses, and free up women's time by mechanizing tasks like milling. Challenges include the lack of appropriate technology providers and making equipment affordable; recommendations focus on supporting small companies and financing options.
This document reviews the suitability of pico-hydropower technology for addressing Nigeria's energy crisis. It discusses Nigeria's energy challenges including low electrification rates, reliance on biomass, and the need to develop sustainable decentralized energy solutions. Pico-hydropower is presented as a potentially important option that could provide cleaner energy to rural communities at an affordable cost while reducing environmental impacts. The technology could help power farms, small businesses and contribute to Nigeria achieving its development goals of universal energy access.
HYDROPOWER ROLE IN STAND-ALONE AND MINI GRID TO POWER SOLUTION IN AFRICAIAEME Publication
Power generation is becoming an issue of concern in developing world, especially in
Africa. There is tremendous population growth in addition to a progressive rise in the use
of electronic devices which has contributed to a greater energy consumption and need.
The three focuses of the strategic electricity plan, namely, supply option, demand
management option and the demand forecasting option are being frustrated with load
shedding management options. Energy is available and enormous, but the challenge of
converting from its existing form to useful form in the form of electricity has to be
addressed if power for all is going to be a reality.
Hydropower (HP) is clean, available, reliable, adequate and renewable. It is
established that about 70% of the earth's surface is covered by water. Engaging small
hydropower (SHP) schemes will go a long way solving the menace. Many developed
countries have installed stand-alone and mini grid system with great success. With the
enormous untapped potentials in Africa, it is time we localise installation of SHP, which
is cheaper and requires little technical know-how or skilled labour instead of depending
on large scale HP which takes years to install and also capital intensive even for nations
to handle.
Optimization of PV Cell through MPPT AlgorithmIRJET Journal
The document discusses optimization of photovoltaic (PV) cells through maximum power point tracking (MPPT) algorithms. It describes several common MPPT algorithms including perturbation and observation (P&O), incremental conductance (IC), constant voltage, and temperature methods. The P&O method works by periodically changing the voltage or current and tracking changes in power to adjust the operating point. The IC method improves on P&O by using incremental conductance to more precisely track the maximum power point, especially under changing conditions. Other methods like constant voltage and temperature tracking use fixed reference points but can be less accurate than adaptive techniques.
EPS is a vertically integrated energy storage company that provides grid support, distributed smart storage, and off-grid power generation solutions using battery energy storage systems and hybrid storage technologies. It has over 100,000 customers in 21 countries with 44.3 MWh of energy storage and 21.1 MW of power output installed or under commissioning. EPS focuses on enabling renewable energy sources through energy storage.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
AMA - Final Project Report1 dtd 20-06-2015Dhiren Patel
The document provides an overview of renewable energy potential and growth in India, as well as the enabling policy framework and incentives available for renewable energy projects. It discusses investment opportunities and financing options for solar and wind energy projects in India. The study aims to compare the investment and financing patterns of solar and wind energy projects in India. It outlines the methodology, scope, and limitations of the comparative study.
Microgrids provide numerous benefits to both customers and society. They improve electric reliability and resilience by continuing to supply power when the central grid fails. Microgrids also enhance cost savings and revenue opportunities for customers. Additionally, microgrids promote clean energy adoption, strengthen the central grid, bolster cybersecurity, provide local economic benefits, and improve community well-being during disasters. In conclusion, microgrids offer a flexible solution that provides reliable power while creating value for customers and society in many ways.
Microgrids provide several key benefits: 1) They improve electric reliability by continuing to supply power when the central grid fails; 2) They enhance resilience and recovery by restoring power more quickly after disruptions; 3) They can lower energy costs for consumers and businesses by efficiently managing energy supply and demand. Overall, microgrids keep critical operations running during outages, strengthen the central electric grid, bolster cybersecurity, provide economic value, and improve community well-being.
IRJET- Techno Commercial Feasibility Study of Renewable EnergiesIRJET Journal
This document provides a summary of the commercial feasibility study of various renewable energy sources. It discusses the major renewable energy sources including wind, solar, biomass, hydro, and tidal energy. It analyzes each source based on their global potential, economic impacts including costs, job creation, and carbon emission reductions. The document finds that renewable energy capacity has significantly increased in recent years. While renewable sources have advantages over fossil fuels, factors like installation costs, land use requirements, and intermittent output must be considered in determining their commercial viability.
Power Generation in The Chemical IndustryIJRTEMJOURNAL
The chemical industry, particularly the production of organic and inorganic base chemicals, has
a high demand for electrical and thermal power. In the chemical industry, power drives processes and
profitability. With most of the chemical industries aiming to expand, having their own power generation plant is
an emerging necessity. This paper provides a brief overview of the various ways in which the chemical industry
has been generating power to meet the needs of its plants and, in some cases, selling the surplus power
produced.
UNIDO: Industrial Prosumers of Renewable EnergyAman Kudesia
Introduction
-Inclusive and Sustainable Industrial Development (ISID)
-Potential for Renewable Energy among Agro-industrial Small and Medium Sized Enterprises (SME’s)
-Industrial Prosumers of Renewable Energy
Opportunities & Benefits of Industrial Prosumers.
Barriers to Industrial prosumers.
Policy Options to Support Industrial Prosumers.
Conclusions and recommendations.
Renewable Energy Developments in IndiaRenewable energy developmentschakri218
This document discusses renewable energy developments in India. It notes that renewable energy currently contributes 12.83% of India's total installed power capacity. Key points include:
- India has significant potential for wind, solar and biomass energy.
- Targets are set to increase renewable capacity to 55,000 MW, or 17% of total capacity, by 2017.
- The share of electricity from renewable sources is projected to rise from 6% currently to 9% by 2017.
Renewable Energy Power Projects for Rural Electrification in IndiaMohit Sharma
As demand for energy is increasing around the world & in India, there is a positive growth trend coming in the renewable energy sector also. There are many rural and remote areas which are energy deficient.
Private companies are encouraged by Government creating opportunities by various governmental schemes like Rajiv Gandhi Grameen Vidyutikaran Yojna, Distributed Decentralized Generation and support in finance, distribution, technology, land, etc. As every area has its dynamics and differs from others in terms of topography, density of population and energy needs, there is a need of study for specific features related to a region (like a cluster of 19 villages in Gaya, Bihar requiring about 750kw Plant studied here) with the help of surveys, financial tools and earlier standards. Other renewable sources and areas are also covered in the book. The confidential information is edited-redacted.
This document discusses the opportunity for renewable energy development through cooperatives in India. It notes that many rural Indians lack access to reliable and safe energy sources. Renewable energy, such as small hydro, solar, and wind, could provide decentralized power generation for rural communities. Cooperatives are well-positioned to take the lead in developing renewable energy projects due to their existing rural presence and membership of over 200 million Indians. However, challenges include the high upfront capital costs and need for technical expertise at the village level. With adequate support mechanisms for financing and project development, cooperatives could help bridge India's energy access gap and promote sustainable rural development through renewable energy.
Paris agreement westafrica diagnosis capacity needsPatrickTanz
This document analyzes the implementation of the Paris Climate Agreement in West Africa. It examines the Nationally Determined Contributions and capacity building needs in the region. West Africa faces significant climate change impacts like rising temperatures and changing rainfall patterns. Regional organizations can help coordinate the response by supporting national policies and initiatives. The document reviews the NDCs of 17 West African countries and finds heterogeneity in their commitments and progress. It also identifies capacity building as key, and analyzes the needs expressed by these countries, such as needs related to planning, reporting, and climate finance. Regional cooperation is crucial to address climate challenges through initiatives like knowledge sharing and coordinated action.
This document provides an executive summary of a foundations paper drafted by the Science Based Targets initiative (SBTi) regarding principles, definitions, metrics, and considerations for financial institutions to set quantitative net-zero targets. The summary outlines key questions addressed, such as what reaching net-zero means for a financial institution and how financed emissions and climate solutions should be addressed. It also provides an overview of the process for developing an SBTi Finance Net-Zero Standard to guide financial institutions in setting robust, science-based net-zero targets.
1. The document provides an updated synthesis of information from 165 NDCs representing 192 parties to the Paris Agreement.
2. It finds that estimated total global GHG emissions in 2025 and 2030 would be 4-5% higher than 2019 levels based on implemented NDCs.
3. For the 116 new or updated NDCs, emissions are projected to be 3.7-11% lower in 2025 and 2030 compared to previous NDCs. However, overall emissions remain significantly higher than pathways limiting warming to 1.5-2°C.
Plastics costs to the society and the environmentPatrickTanz
This document summarizes a report about the costs of plastic to society, the environment, and the economy. It finds that the lifetime cost of plastic produced in 2019 will be at least $3.7 trillion due to negative external impacts not reflected in plastic's market price, such as greenhouse gas emissions, waste management costs, and environmental damage from plastic pollution. Without action, the lifetime costs of plastic produced in 2040 could reach over $7 trillion. Currently the global approach is failing to adequately address the plastic crisis. Urgent government action is needed at both the international and national levels to internalize plastic's real costs and establish an effective regulatory framework.
Plastics, the costs to societyand the environmentPatrickTanz
This document summarizes a report about the costs of plastic to society, the environment, and the economy. It finds that the lifetime cost of plastic produced in 2019 will be at least $3.7 trillion, more than the GDP of India. This cost is much higher than the market price paid for plastic, which fails to account for costs across the plastic lifecycle like greenhouse gas emissions, waste management, and environmental damage from plastic pollution. Without action, the lifetime costs of plastic produced in 2040 could reach over $7 trillion due to expected increases in plastic production. The report calls for governments and industries to take urgent action through policies, regulations, and international agreements to address the plastic crisis and internalize the true costs of plastic
The document provides an overview of nutrient management and fertilizers. It discusses the essential nutrients required for healthy plant growth, different organic and mineral nutrient sources, and why fertilizers are needed to maintain soil fertility and support productive and nutritious crops. The main nutrient sources discussed are soil nutrients, crop residues, manure, compost, biological nitrogen fixation, and manufactured fertilizers. It also covers nutrient cycling and losses, integrated nutrient management approaches, and the principles of nutrient stewardship.
Mechatronics is a multidisciplinary field that refers to the skill sets needed in the contemporary, advanced automated manufacturing industry. At the intersection of mechanics, electronics, and computing, mechatronics specialists create simpler, smarter systems. Mechatronics is an essential foundation for the expected growth in automation and manufacturing.
Mechatronics deals with robotics, control systems, and electro-mechanical systems.
Open Channel Flow: fluid flow with a free surfaceIndrajeet sahu
Open Channel Flow: This topic focuses on fluid flow with a free surface, such as in rivers, canals, and drainage ditches. Key concepts include the classification of flow types (steady vs. unsteady, uniform vs. non-uniform), hydraulic radius, flow resistance, Manning's equation, critical flow conditions, and energy and momentum principles. It also covers flow measurement techniques, gradually varied flow analysis, and the design of open channels. Understanding these principles is vital for effective water resource management and engineering applications.
Null Bangalore | Pentesters Approach to AWS IAMDivyanshu
#Abstract:
- Learn more about the real-world methods for auditing AWS IAM (Identity and Access Management) as a pentester. So let us proceed with a brief discussion of IAM as well as some typical misconfigurations and their potential exploits in order to reinforce the understanding of IAM security best practices.
- Gain actionable insights into AWS IAM policies and roles, using hands on approach.
#Prerequisites:
- Basic understanding of AWS services and architecture
- Familiarity with cloud security concepts
- Experience using the AWS Management Console or AWS CLI.
- For hands on lab create account on [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
# Scenario Covered:
- Basics of IAM in AWS
- Implementing IAM Policies with Least Privilege to Manage S3 Bucket
- Objective: Create an S3 bucket with least privilege IAM policy and validate access.
- Steps:
- Create S3 bucket.
- Attach least privilege policy to IAM user.
- Validate access.
- Exploiting IAM PassRole Misconfiguration
-Allows a user to pass a specific IAM role to an AWS service (ec2), typically used for service access delegation. Then exploit PassRole Misconfiguration granting unauthorized access to sensitive resources.
- Objective: Demonstrate how a PassRole misconfiguration can grant unauthorized access.
- Steps:
- Allow user to pass IAM role to EC2.
- Exploit misconfiguration for unauthorized access.
- Access sensitive resources.
- Exploiting IAM AssumeRole Misconfiguration with Overly Permissive Role
- An overly permissive IAM role configuration can lead to privilege escalation by creating a role with administrative privileges and allow a user to assume this role.
- Objective: Show how overly permissive IAM roles can lead to privilege escalation.
- Steps:
- Create role with administrative privileges.
- Allow user to assume the role.
- Perform administrative actions.
- Differentiation between PassRole vs AssumeRole
Try at [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...PriyankaKilaniya
Energy efficiency has been important since the latter part of the last century. The main object of this survey is to determine the energy efficiency knowledge among consumers. Two separate districts in Bangladesh are selected to conduct the survey on households and showrooms about the energy and seller also. The survey uses the data to find some regression equations from which it is easy to predict energy efficiency knowledge. The data is analyzed and calculated based on five important criteria. The initial target was to find some factors that help predict a person's energy efficiency knowledge. From the survey, it is found that the energy efficiency awareness among the people of our country is very low. Relationships between household energy use behaviors are estimated using a unique dataset of about 40 households and 20 showrooms in Bangladesh's Chapainawabganj and Bagerhat districts. Knowledge of energy consumption and energy efficiency technology options is found to be associated with household use of energy conservation practices. Household characteristics also influence household energy use behavior. Younger household cohorts are more likely to adopt energy-efficient technologies and energy conservation practices and place primary importance on energy saving for environmental reasons. Education also influences attitudes toward energy conservation in Bangladesh. Low-education households indicate they primarily save electricity for the environment while high-education households indicate they are motivated by environmental concerns.
Generative AI Use cases applications solutions and implementation.pdfmahaffeycheryld
Generative AI solutions encompass a range of capabilities from content creation to complex problem-solving across industries. Implementing generative AI involves identifying specific business needs, developing tailored AI models using techniques like GANs and VAEs, and integrating these models into existing workflows. Data quality and continuous model refinement are crucial for effective implementation. Businesses must also consider ethical implications and ensure transparency in AI decision-making. Generative AI's implementation aims to enhance efficiency, creativity, and innovation by leveraging autonomous generation and sophisticated learning algorithms to meet diverse business challenges.
https://www.leewayhertz.com/generative-ai-use-cases-and-applications/
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODELijaia
As digital technology becomes more deeply embedded in power systems, protecting the communication
networks of Smart Grids (SG) has emerged as a critical concern. Distributed Network Protocol 3 (DNP3)
represents a multi-tiered application layer protocol extensively utilized in Supervisory Control and Data
Acquisition (SCADA)-based smart grids to facilitate real-time data gathering and control functionalities.
Robust Intrusion Detection Systems (IDS) are necessary for early threat detection and mitigation because
of the interconnection of these networks, which makes them vulnerable to a variety of cyberattacks. To
solve this issue, this paper develops a hybrid Deep Learning (DL) model specifically designed for intrusion
detection in smart grids. The proposed approach is a combination of the Convolutional Neural Network
(CNN) and the Long-Short-Term Memory algorithms (LSTM). We employed a recent intrusion detection
dataset (DNP3), which focuses on unauthorized commands and Denial of Service (DoS) cyberattacks, to
train and test our model. The results of our experiments show that our CNN-LSTM method is much better
at finding smart grid intrusions than other deep learning algorithms used for classification. In addition,
our proposed approach improves accuracy, precision, recall, and F1 score, achieving a high detection
accuracy rate of 99.50%.
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...shadow0702a
This document serves as a comprehensive step-by-step guide on how to effectively use PyCharm for remote debugging of the Windows Subsystem for Linux (WSL) on a local Windows machine. It meticulously outlines several critical steps in the process, starting with the crucial task of enabling permissions, followed by the installation and configuration of WSL.
The guide then proceeds to explain how to set up the SSH service within the WSL environment, an integral part of the process. Alongside this, it also provides detailed instructions on how to modify the inbound rules of the Windows firewall to facilitate the process, ensuring that there are no connectivity issues that could potentially hinder the debugging process.
The document further emphasizes on the importance of checking the connection between the Windows and WSL environments, providing instructions on how to ensure that the connection is optimal and ready for remote debugging.
It also offers an in-depth guide on how to configure the WSL interpreter and files within the PyCharm environment. This is essential for ensuring that the debugging process is set up correctly and that the program can be run effectively within the WSL terminal.
Additionally, the document provides guidance on how to set up breakpoints for debugging, a fundamental aspect of the debugging process which allows the developer to stop the execution of their code at certain points and inspect their program at those stages.
Finally, the document concludes by providing a link to a reference blog. This blog offers additional information and guidance on configuring the remote Python interpreter in PyCharm, providing the reader with a well-rounded understanding of the process.
Digital Twins Computer Networking Paper Presentation.pptxaryanpankaj78
A Digital Twin in computer networking is a virtual representation of a physical network, used to simulate, analyze, and optimize network performance and reliability. It leverages real-time data to enhance network management, predict issues, and improve decision-making processes.
Tools & Techniques for Commissioning and Maintaining PV Systems W-Animations ...Transcat
Join us for this solutions-based webinar on the tools and techniques for commissioning and maintaining PV Systems. In this session, we'll review the process of building and maintaining a solar array, starting with installation and commissioning, then reviewing operations and maintenance of the system. This course will review insulation resistance testing, I-V curve testing, earth-bond continuity, ground resistance testing, performance tests, visual inspections, ground and arc fault testing procedures, and power quality analysis.
Fluke Solar Application Specialist Will White is presenting on this engaging topic:
Will has worked in the renewable energy industry since 2005, first as an installer for a small east coast solar integrator before adding sales, design, and project management to his skillset. In 2022, Will joined Fluke as a solar application specialist, where he supports their renewable energy testing equipment like IV-curve tracers, electrical meters, and thermal imaging cameras. Experienced in wind power, solar thermal, energy storage, and all scales of PV, Will has primarily focused on residential and small commercial systems. He is passionate about implementing high-quality, code-compliant installation techniques.
2. 02
CONTENTS
INTRODUCTION 1
The Clean Energy and Agriculture Nexus
Micro-Grids Powering Agricultural Loads
APPROACHES TO SERVING
THE OFF-GRID MARKET 4
Renewable Energy Micro-Grids
Powering Agricultural Loads
Agricultural Loads and Micro-Grids Economic
Viability
CHALLENGES TO PROFITABLE
MICRO-GRID OPERATION
AND THE POTENTIAL FOR
AGRICULTURAL LOADS 12
AGRICULTURE-SPECIFIC
RECOMMENDATIONS FOR
PROFITABLE MICRO-GRID
OPERATION 15
Recommendations for Micro-Grid Developers
Recommendations for International Donors
CONCLUSION 18
REFERENCES 19
3. 1
Figure 1 THE ENERGY AND AGRICULTURE VIRTUOUS CIRCLE6
The Clean Energy-Agriculture Nexus
Agriculture is the main means of livelihood for 2.5 billion people worldwide,1
primarily in developing
countries, where approximately 45 percent of the population relies on agriculture as a chief source
of income.1
A strong agriculture sector is crucial for economic development, accounting for as much
as 30 percent of developing countries’ gross domestic product.2,3
For these countries, increased
agricultural productivity is a key driver of food security, income generation, and improved quality
of life in rural areas.1
Increasing agricultural productivity will require access to increasing amounts of energy. Today, food
production accounts for 30 percent of global energy consumption,4
and energy use will continue to
grow as the world’s population rises. The Food and Agriculture Organization of the United Nations
predicts that between 2006 and 2050, food production will need to increase by 170 percent to
accommodate a 130 percent rise in global population.5
Clean energy services offer a sustainable alternative to meeting agricultural demand. By deploying
clean energy technologies, farmers can mechanize operations, process raw products to add value
to commodities, and extend the shelf life of produce through refrigerated storage.5
The relationship between clean energy and agriculture is a virtuous cycle that can be harnessed to
maximize developmental impacts in rural areas. The cycle begins by providing poor, rural families
access to cleaner, more affordable energy, which can improve community health and provide more
opportunities to earn income.4
Farmers can both diversify and increase agricultural production using
affordable energy.4
With increased income, households and communities can purchase more energy.1
This increase in energy demand can enable new or improved energy products and services,1
which
can create more opportunities to enhance livelihoods and strengthen the energy-agriculture cycle,
as illustrated in Figure 1.
INTRODUCTION
INCREASED COMMUNITY
INCOME
NEW ENERGY SERVICES
INTRODUCED INTO COMMUNITY
INCREASED AGRICULTURAL
PRODUCTION
INCREASED ENERGY ACCESS
4. 2
Recognizing the interconnectedness of clean
energy and agriculture, the U.S Agency for
International Development (USAID), the German
Federal Ministry for Economic Cooperation and
Development (BMZ), and the Swedish International
Development Cooperation Agency (Sida), along with
the Overseas Private Investment Corporation (OPIC)
and Duke Energy, founded Powering Agriculture:
An Energy Grand Challenge for Development. This
partnership supported the piloting of new and
more sustainable approaches to accelerate the
deployment of clean energy solutions to increase
agriculture production and value in developing
countries. Powering Agriculture selected 24
innovators through a competitive process to receive
funding for clean energy pilot projects, such as solar pumps, cold storage, and micro-grids. Their
experiences informed the development of this case study.
Micro-Grids Powering Agricultural Loads
This case study examines the mutually beneficial relationship between micro-grids
and agricultural production, highlighting how the stimulation of productive agricultural
electricity loads can increase micro-utility revenue and create a stronger financial
argument for the deployment of micro-grids into unelectrified rural areas. It draws on lessons learned
from Powering Agriculture innovators developing micro-grids around the world in addition to literature
focusing on micro-grids’ use of productive power.a
In contrast to solar lanterns or solar home systems (SHS), which typically only power household
appliances and agro-processing equipment requiring less than one kilowatt (kW), micro-grids can
provide higher peak power for longer periods, allowing them to power a wider range of productive
commercial equipment like high-lift irrigation pumps, freezers, or telecommunications equipment.
This capability makes micro-grids attractive to both rural entrepreneurs and off-grid households.
Additionally, micro-grids can produce both single-phase and three-phase electricity. As a result,
micro-grids can power electrical equipment such as heaters and motors that are used throughout the
agricultural value chain (AVC). This means that micro-grids have potential for widespread economic
transformation within rural agricultural communities as they can support improved productivity, value-
added processing, and the growth of local economic activity.
aThe term “micro-grid”’ is used here to refer to both micro-grids and mini-grids. Both are isolated networks of electricity loads,
distribution cables, and generators that can serve a neighborhood, community, or region independently from the national grid.
Some of these grids also have the ability to connect to and disconnect from a larger grid. While similar in composition, micro-grids
generally range from one kW to ten kW and mini-grids from ten kW to several megawatts (MW).7 While their sizes differ, they face
the same challenges.
POWERING AGRICULTURE
MICRO-GRID INNOVATORS
MICRO-GRID
LOCATIONS
EarthSpark International Haiti
Earth Institute at Columbia
University
Senegal
Husk Power Systems India, Nigeria,
Tanzania
iDE Bangladesh Bangladesh
Universidad del Valle de
Guatemala
Guatemala
Claro Energy India
Table 1 POWERING AGRICULTURE MICRO-GRID
INNOVATORS AND LOCATIONS
5. 3
At the same time, agricultural loads can play an important role improving the economic viability of
micro-grids. Micro-grids require minimum levels of utilization to justify the necessary capital investment,
while at the same time requiring customers that are both willing and able to pay for the technology. In
addition, the economics of micro-grids are improved by the extent to which electricity demand matches
the energy generated. In the case of renewable energy micro-grids, where power is often generated
during the day, daytime loads are necessary for making energy costs competitive with those of SHS
or grid extension.8
While residential demand is often exclusively for nighttime lighting, consumption
for agricultural processes such as milling, grinding, or water pumping is typically during the day and
as such can improve the economic viability of the micro-grids.
SOLAR
WIND
RESIDENTIAL LOAD
FLOW OF ELECTRICITY
ENERGY STORAGE
DIESEL
GENERATOR
COMMERCIAL AND
INDUSTRIAL LOADS
Figure 2 MICRO-GRID SYSTEM9
6. 4
CLEAN ENERGY
GENERATION TECHNOLOGY
ESTIMATED LCOE BENEFITS DISADVANTAGES
Solar Power $0.33 to
$0.87 per kWh
• Easily accessible and
widely available energy
resource
• Commercially mature
• Low operating costs
• No generation at night; requires
storage
• Variable and intermittent
generation
• High capital cost
Small-Scale Wind
Power (50 to 100 kW
with storage- and/or
diesel-hybrid)
$0.26 to
$0.35 per kWh
• Low operating cost
• Day and night power
generation
• Commercially available
• Variable and intermittent
generation
• Not a widely available energy
resource
• High capital costs
Biomass
(50 to 100 kW)
$0.17 to
$0.28 per kWh
• Can create a market for
crop waste/residue
• Generation is
predictable and
dispatchable
• Tar, ash, clinker disposal issues
• Fluctuation in feedstock
availability
• Only specific feedstocks are
chemically or economically
suitable for use
• Very limited availability of
technical experts
Biogas Not available • Can be used in gasoline-
powered engines
without significant
modification
• Can be coupled with
wastewater treatment
• Post-digestion sludge requires
disposal
• Communities can perceive human
feces-derived biogas as taboo
• Non-feces-based digestion is
experimental
Small-Scale Hydro
(50 to 100 kW)
$0.10 to
$0.24 per kWh
• Low operating cost
• 24-hour electricity
production
• Fully commercially
available
• High development cost
• Production fluctuates with
seasonal flowrates
• Civil works significantly increase
capital cost
• Sites with good hydropower
availability may not be close to
demand (e.g., villages)
Renewable Energy Micro-Grids
Micro-grids can be powered by several clean energy sources from solar to biomass,
each with different fuel and operating costs. Table 2 compares several common clean
energy sources that power micro-grids and provides an estimated levelized cost of
electricity (LCOE) ranging from $0.10 to $0.87 per kilowatt-hour (kWh) based on research from the
International Finance Corporation (IFC) and the University of Cambridge.10,11
APPROACHES TO SERVING THE OFF-
GRID MARKET
Table 2 ENERGY SOURCES FOR MICRO-GRIDS10,11
7. 5
While the LCOEs for micro-grids may appear high when compared to retail electricity tariffs, it is
important to note that they compare favorably when factoring in the costs of grid extension. A 2018
Bloomberg New Energy Finance (BNEF) analysis found that in the case of rural consumers with low to
moderate energy demand (between 200 and 900 kWh per year), micro-grids may often be less expensive
than both grid extension and SHS, and by 2030 micro-grid energy costs are expected to always be more
affordable than those for stand-alone diesel generators (Figure 3).8
Historically, the most common clean energy source for micro-grids is micro-hydro; however, developers
are increasingly installing solar-hybrid (mostly diesel, but also biomass) systems12
due to the dropping
cost of solar, the wide availability of solar energy resources, and low plant construction time. Powering
Agriculture innovators are installing a combination of solar-only and solar-hybrid micro-grids. Solar
power offers several advantages over other clean energy technologies, including fast design and
construction times, low variation in solar insolation between nearby sites, and low generation costs.
A few developers, like Powering Agricutlure innovator Husk Power Systems, hybridize solar with a
dispatchable generator using biomass gasification to address solar power’s principal disadvantage:
variable daily, seasonal, and annual generation. Solar-hybrid systems can reduce the capital cost of
a micro-grid’s power plant by reducing the excess solar generation and battery storage capacity that
solar-only systems typically require to ensure the system can accommodate the highest load on the
cloudiest day. In contrast, solar-hybrid systems do not need to oversize their solar arrays or battery
storage, saving on plant capital cost.
A well-designed solar-hybrid system can reduce capital cost with little increase in operating costs,
resulting in a lower tariff than a comparable solar-only system.
LOW INCOME: Retail tariffs + grid extension
MEDIUM INCOME: Retail tariffs + grid extension
LOW INCOME: Micro-grid
MEDIUM INCOME: Micro-grid
LOW INCOME: SHS
MEDIUM INCOME: SHS
MEDIUM INCOME: STAND-ALONE DIESEL
$/kWh (REAL 2017)
2017 2030
0.0
0.5
1.0
1.5
2.0
Figure 3 COST OF DELIVERED ENERGY FOR LOW-INCOME CONSUMERS (207 kWh PER YEAR)
AND MEDIUM-INCOME CONSUMERS (985 kWh PER YEAR)8
Note: Low-income customers are assumed to use 207 kWh per year or a 10 to 35 W SHS. Medium-income refers to a consumption
of 985 kWh per year and a 200 W SHS. The micro-grid with daytime load produces additional electricity for non-residential activities.
8. 6
Some clean energy generation technologies, such as micro-hydro and wind, can only be sited in a
small number of specific places with high energy availability. Often, this means that energy must be
generated at one site and transmitted along a power line to loads at another site. This limits the number
of communities and micro-grids that can be cost-effectively powered by micro-hydro and wind. However,
these generation technologies have the advantage of being able to produce electricity day and night
without the need to transport fuel (e.g., diesel or biomass feedstock) to communities.
One potential synergy between agriculture and micro-grids is through use of agricultural waste streams
in the generation of power. Many agricultural communities have agricultural by-products such as rice
husks, bagasse, or corn cobs. Powering Agriculture innovators Village Industrial Power and Husk Power
utilize biomass to generate electricity. One way in which micro-grid operators can smooth out fuel
supply and price volatility is through long-term purchase agreements with farmers, millers, and other
sources of feedstock. These agreements create a market that increases the income and quality of life
of the participating farmers and millers.
POWERING AGRICULTURE CASE STUDY:
HUSK POWER SYSTEMS
Husk Power Systems, a Powering Agriculture
innovator based in India, sources rice husks and
maize cobs (by-products of crop processing)
from local millers to fuel the generators within
their solar-biomass-hybrid power plants. While
solar photovoltaic (PV) powers daytime loads, the
biomass-fueled generators run during the micro-
grids’ evening hours of peak demand. As a result,
battery expenditures can be reduced because
there is less need to store solar power to supply
evening loads. With this technology, Husk Power
found an efficient way to reduce their capital and
operating expenses while also enabling farmers
and millers to collect more value from their crops.
This also demonstrates the virtuous circle that clean energy micro-grids and agriculture can create:
while Husk Power purchases feedstock from millers, the millers purchase electricity from Husk Power.
Husk Power installs PV panels in Tanzania. Photo courtesy of Husk
Power Systems.
9. 7
Powering Agricultural Loads
Agricultural loads consume energy at every point of the AVC between the field and the
dinner plate to refine, move, or preserve the agricultural products farmers produce.
That energy can take the form of chemical energy in fertilizer, heat in a drier, diesel
consumed by a tractor, or electricity in a walk-in freezer. These inputs can improve farmers’ livelihoods
by increasing production and reducing post-harvest loss, allowing farmers to sell their products when
and where prices are higher and adding value to their crops. The AVC shown in Figure 4 on page 8 maps
each process and its inputs from field inputs to household plates, and shows where energy inputs can
allow farmers to capture more value. Many of these processes can be powered by micro-grids. For
example, the mini-grids Claro Energy installed in Bihar, India power processes ranging from irrigation
to processing to packaging for distribution and sale.
POWERING AGRICULTURE CASE STUDY:
CLARO ENERGY
Claro Energy, a Powering Agriculture innovator based
in India, installed two micro-grids in Bihar to power the
lighting, spice grinding, and irrigation needs of two local
communities. In addition to supplying domestic loads
like lighting, phones, and televisions, these micro-grids
touch the AVC in multiple places, creating added value
for farmers and establishing an ecosystem around
preserving and distributing crops to a wider population.
Wheat, turmeric, coriander, and mustard farmers
connected to Claro’s micro-grids use electricity at the
input stage for irrigation to increase their agricultural
production. Electricity is also an input into the value-
added processing stage: Claro bought an electric mill to
turn the turmeric and coriander into ground spices and
an oil impeller to extract mustard oil. Finally, electricity is
used in the marketing and distribution of the ground spices, as Claro employees package the spices and
oil for distribution and sales across the two micro-grid communities and Delhi.
A Claro Energy employee grinds chilis for sale in Delhi using
micro-grid power. Photo courtesy of Claro Energy.
10. 8
At the same time, agricultural applications often pose specific challenges to the design and
implementation of electric power systems. Many agricultural loads use single- and three-phase motors
to move, grind, compress, or pump. Smaller motors under five kW are frequently designed to use single-
phase alternating current (AC) power because it is cheaper to build a small single-phase motor than
a small three-phase motor. However, as the power needs of agricultural loads exceed roughly five kW,
they are usually powered by three-phase motors. This is because single-phase power is a less efficient
method of transporting and delivering power to a user, and the costs associated with delivering large
quantities of single-phase power to a household become prohibitive. Generating three-phase power
increases both the complexity and capital cost of the generation and distribution system beyond the
level that is found in SHS. Micro-grids are the principal conduit for off-grid farmers to receive three-
phase power for larger-scale agricultural processing. Table 3 lists examples of common agricultural
loads and their running power, start-up power, and phase requirements.
Providing the connection capacity and correct number of phases for farmers to use the agricultural
loads listed in Table 3 can present micro-grid developers and operators with an added challenge: high
motor start-up power requirements. Motors are particularly demanding for micro-grids to support
because of the high start-up power required for the equipment to work properly. When starting, motors
require extra power to accelerate up to operating speed. Depending on the motor design, this start-up
power requirement is typically three to four times the running power of the motor. To start a motor,
the generation and distribution systems must be designed to supply the required start-up power at
the farmer’s service entrance, which has significant cost implications on the equipment between the
inverter in the powerhouse and the farm’s service drop. This power delivery capacity (in the form of
INPUTS
• Irrigation
• Crop
spraying
& pest
control
• Livestock
watering
• Pond
aeration
• Electric fences
• Chicken egg
incubation
• Barn/hutch
ventilation
• Farm security
lighting
• Nighttime
lighting
• Cold storage
• Moisture
control
• Mechanized
sorting/
packaging
• Chicken
processing
• Sawmills
• Carpentry
• Incense stick
production
• Grinding,
milling,
polishing
• Crop drying
• Display lighting
• Retail store
refrigeration
• Warehousing
PRODUCTION AGGREGATION &
HANDLING
VALUE-ADDED
PROCESSING
MARKETING &
DISTRIBUTION
END-USER
Figure 4 EXEMPLARY AGRICULTURAL VALUE CHAIN13,14
11. 9
larger generation and distribution wiring) then sits idle after the motor reaches operating speed
and consumes much less power. This idle capacity in the micro-grid will increase the time required
to reach the micro-grid’s break-even point and return on investment.
Agricultural Loads and Micro-Grid Economic Viability
The global market for micro-grids is large; the International Energy Agency predicts
that micro-grids can cost-effectively supply electricity to 290 million unelectrified
people in Africa alone.16
While countries on other continents are expected to make large
strides in reducing their unelectrified populations, Africa’s unelectrified population is only expected to
shrink from 608 million to 583 million between 2016 and 2030.8
To achieve global universal electricity
access by 2030, a UN Sustainable Development Goal, BNEF predicts that $165 billion will be needed
in micro-grid investment.8
However, micro-grids are capital-intensive endeavors that require minimum levels of utilization to
justify. A 2017 IFC analysis of 20 private micro-utilities found that the average revenue per user is $7 per
month, while the average investment is $920 per user. The same set of micro-utilities spent an average
of 58 percent of their revenue on operating expenses, leaving $4 per user per month to cover company
administration costs, loan repayments, and equipment replacement costs.17
The average time to
profitability within the survey group was more than seven years.17
Many investors are unwilling
to wait this long to see an initial return on their investment, so it is difficult for private micro-utility
companies to find the capital investment necessary to fuel their growth.
TYPE OF EQUIPMENT WATTAGE (W) TYPE OF POWER
SUPPLY REQUIRED
START-UP WATTAGE (W)
Chilling/cooling 800–4,800 Single-phase None
Drying 600–800 Single-phase None
Pasteurizing, separators,
homogenizers
700–3,500 Three-phase 1,400–10,500
Incubating 200–6,000 Three-phase 600–18,000
Irrigation pumping 500–4,200 Three-phase 4,800–7,200
Pressing 1,500–4,800 Three-phase 3,000–9,200
Grinding 800–3,250 Three-phase 6,500–9,800
Milling 850–7,500 Three-phase 1,500–21,500
Packaging machine 250–3,000 Three-phase None
Table 3 ELECTRICITY CONSUMPTION PATTERNS: AGRICULTURAL, HORTICULTURAL,
AND AQUACULTURE LOADS15
12. 10
The incorporation of agricultural loads can improve the economics of micro-grids in two key ways:
Intensification of demand. Micro-utilities require sufficient base load to ensure installed infrastructure
is used efficiently.7
A central issue is that rural populations are often geographically disbursed and have
low energy consumption. This results in high distribution infrastructure costs, which may be impossible
to recover over the lifetime of the micro-grid. The presence of agricultural loads can increase the density
of demand and allow the micro-grid to realize lower generation costs through economies of scale.
Kenyan micro-grid developer Vulcan Impact Investing found that small- and medium-sized enterprises
(SMEs) play a key role in the economic viability of its micro-grids, with the upper ten percent of its
customers providing 40 percent of the company’s portfolio’s revenue.18
The presence of SMEs in a customer base can potentially generate more predictable revenue for micro-
grids. Household consumers, for instance, may engage in energy stacking — a phenomenon where
customers with electricity access do not completely replace their traditional sources of energy (e.g.,
kerosene, disposable batteries, and solar lanterns) — which makes actual customer demand lower
than what developers may assume. The experience of iDE, a Powering Agriculture micro-grid innovator
in Bangladesh, supports this. iDE found that its residential customers with SHS utilized both power
supplies simultaneously to light different rooms within their homes or used the SHS as a backup in
case micro-grid electricity was interrupted. However, iDE also found that its business model was, to
some degree, resilient to the low and unpredictable electricity consumption of the micro-grid residential
customers as the bulk of its energy consumption resulted from fish hatchery anchor loads. These
anchor clients with profitable businesses provided a consistent source of revenue for the micro-grids.
Improved demand management. Matching electricity demand to generation is critical to reducing the
cost of energy from micro-grids. Household electricity use is generally for lighting and phone charging.
These activities tend to be low-power and concentrated in the evening hours, while renewable energy
micro-grids often produce peak power during the day. This means that costly storage capacity is needed
to serve residential loads in the evening, while generation and distribution system capacity sits idle
during the day.
The addition of daytime loads can improve the utilization of the assets, and in turn, the profitability
of the system. Powering Agriculture innovator Claro Energy installed two micro-grids in Bihar, India
to power communal irrigation systems and domestic loads. Claro installed its own agricultural load,
a spice grinder, into one of its micro-grids to operate during lulls in irrigation system usage. The
spice grinder has the same power draw as an irrigation pump used by vegetable farmers within the
community, so Claro is able operate the spice grinder to compensate for the expected drop in demand
when vegetable farmers stop irrigating their crops in the midday sun. Claro then turns off its spice
grinder before vegetable irrigation resumes in the evening. The more constant load profile throughout
the day increases Claro’s micro-grid utilization and decreases its generation costs.
Similarly, agricultural processes can compensate for seasonal fluctuations in renewable energy
availability. In the solar micro-grids installed in rural Bangladeshi communities under Powering
13. 11
Agriculture, peak demand for water pumping within fish hatcheries during the dry season coincides
with seasonally high solar availability. Correspondingly, electricity demand for pumping loads during
the monsoon season, when the sky is cloudy and solar availability is limited, are also low.
A Bangladeshi fish hatchery serving as an anchor load for a micro-grid developed by iDE. Photo courtesy of iDE.
14. 12
Despite the synergies between micro-grids and agricultural loads, micro-grid developers are in the initial
stages of testing and scaling related business models. There are a number of challenges they must
consistently overcome for the opportunities in this space to be fully realized:
The optimal system design for powering agricultural processes is complex.
The specific characteristics of agricultural loads, such as timing, magnitude, and start-
up power requirements, can have a large impact on both the technical performance
and financial viability of micro-grids. Many developers focus on a single anchor load
to provide an initial reliable source of revenue for the micro-utility — for example, fish hatcheries in iDE
Bangladesh’s micro-grids, cell phone towers for Husk Power’s micro-grids, and a coffee cooperative in
the case of Powering Agriculture innovator Universidad del Valle de Guatemala. However, because
many anchor loads are seasonal, there are periods when little revenue is being collected. If seasonal
anchor loads are significantly higher than other loads, they can drive up the micro-grid’s capital cost
and lead to higher tariffs overall. A model from the U.S. Department of Energy’s National Renewable
Energy Laboratory showed that the energy costs for a hypothetical solar micro-grid in Tanzania would
increase by seven percent if developers added a ten kW maize mill that only operates for six months
per year.14
The same mill operating throughout the year would result in a nine percent decrease in
energy costs. Careful study and optimization of year-round load requirements are key to ensuring
micro-grid profitability.
Developers must acquire new skill sets for incorporating agricultural businesses into
micro-grid design. Designing micro-grids to incorporate agricultural loads requires
both detailed knowledge of the equipment and a strong understanding of agricultural
processes and practices. Agricultural loads with motors force micro-grid designers
and operators to anticipate what loads the micro-utility will power and the implications those loads
will have on the micro-grid’s instantaneous and long-term power delivery capacity, overall micro-grid
power factor, and number of phases. This requires understanding the specific electrical characteristics
of the equipment that will be connected to the micro-grid and how that equipment will be used over
time. This can be a complicated task as farmers grow multiple crops throughout the year. As such, the
rate at which they buy and connect electric machinery to the system will vary, and communities may
have different equipment with different electrical characteristics available in the marketplace. The
inclusion of agricultural loads on a micro-grid significantly complicates the prediction of load, growth,
and grid stability.
CHALLENGES TO PROFITABLE
MICRO-GRID OPERATION AND
THE POTENTIAL FOR AGRICULTURAL
LOADS
15. 13
Customers’ ability to pay is variable. Agricultural-based communities see large
fluctuations in income from season to season and year to year. While some technologies
such as irrigation allow farmers to harvest year-round, most only harvest at specific
times of the year. As a result, farmers collect income in bursts throughout the year. Crops
can also fail due to disease or weather. This makes farmers cautious of services that require continuous
payments in perpetuity. A Powering Agriculture innovator, KickStart, discovered during market research
that Kenyan farmers prefer purchasing stand-alone solar irrigation pumps over grid- or micro-grid-
powered pumps because they expect years when they will not have disposable income to spend on
electricity for irrigation.
Government policies frequently create uncertainty for micro-grid developers.
Unclear grid expansion policy presents three problems for micro-grid developers:
1) demand stagnates in areas where the grid is expected as agricultural customers
wait to invest in electrical equipment until after the grid arrives, 2) customers
may abandon the micro-grid in favor of lower-cost grid power once the grid does arrive, and 3) the
government may regulate the micro-grid differently if the micro-grid and state grids coincide. As a result,
grid extension into a micro-grid site can compromise a micro-utility’s ability to recoup its infrastructure
investment, so micro-utilities try to avoid areas where the grid is expanding. However, most countries
have adopted rural electrification policies that focus on grid extension into all unelectrified areas and
do not address where and how micro-grids could fit into their country’s electrification plans. As a result,
micro-grid developers try to guess if the grid will expand into their site during the life of the micro-grid,
but this is a potentially costly gamble that a micro-utility cannot afford to lose.
Electrification may be necessary, but not sufficient, for local economic improvement.
The mere availability of power is likely insufficient to spur the immediate and
spontaneous growth of agricultural consumers. Without additional demand
stimulation activities, a five- to seven-year lag is typically observed between
community electrification and new busines formation.13
This lag can be attributed to a number of factors:
• Community members may not have experience starting agribusiness enterprises that utilize
electricity to increase crop value.
• Basic business skills like bookkeeping, business management, supply chain management,
and fundraising may be missing within the community. Entrepreneurial skill training is needed
to accelerate agribusines creation.19
• Financing to fund the development of SMEs and purchase electrical appliances is typically
not available to rural communities.18
• Potential entrepreneurs may not know which electrically-powered technologies are available,
how to operate them, and how to evaluate their usage cost.
16. 14
There is no proven business model for promoting the growth of micro-grid-powered agribusinesses, and
micro-grid developers are still in the early stages of learning about what works well and what does not.
LESSONS FROM
EARTHSPARK INTERNATIONAL20
With Powering Agriculture funding, innovator EarthSpark International expanded a micro-grid in the coastal
town of Les Anglais, Haiti, serving 450 connections with a 100 kW solar + diesel + storage micro-grid.
EarthSpark had negative experiences with a corn mill and thresher purchased abroad. The equipment
failed to meet manufacturers’ specifications, was poorly assembled, continually tripped safety fuses, and
did not attract more business for the equipment owners. These problems compromised the viability of the
businesses built about them. As a result, the corn milling and threshing business closed, and EarthSpark
was not able to leverage the benefits of an agricultural load — increased utilization and a more stable
demand profile.
EarthSpark derived three recommendations for micro-grid operators from its experience in trying to
stimulate demand with agricultural loads:
1. Identify a list of efficient, quality-assured AC appliances.
2. Carefully analyze demand stimulation case studies implemented by other micro-utilities before
implementing them yourself.
3. Conduct field tests to evaluate promising machinery performance in the local environment.
Powering Agriculture clean energy expert Dr. Carolina Barreto (bottom right) with EarthSpark employees on a monitoring and
evaluation site visit in Les Anglais, Haiti in May 2016. Photo courtesy of Powering Agriculture.
17. 15
Available micro-grid literature and the experiences of Powering Agriculture’s micro-grid innovators
provide many lessons for current and aspiring micro-grid developers, as well as for international
development professionals responsible for managing micro-grid projects.
Recommendations for Micro-Grid Developers
Operating clean energy micro-grids in rural, unelectrified, and developing communities
is a budding industry searching for best practices. Heterogeneity of government
regulation, geographic layout, energy availability, and local economics make it
difficult for micro-utilities to adopt common best practices. However, the experiences of the Powering
Agriculture micro-grid innovators echoed concepts discussed in the literature. Below are some
recommendations for micro-utilities to incorporate into their micro-grid planning and operation:
Promote demand when generation capacity is available. Micro-utilities must maximize the use of
infrastructure to justify the cost of installation and operation of a micro-grid. As developed countries
electrified, utility companies embraced demand stimulation as a method to increase revenue and
optimally use installed plant and distribution capacity to reduce electricity prices. Micro-utilities can
similarly benefit from demand stimulation. Since agriculture is the primary industry in developing
communities, stimulating demand through productive agricultural uses of electricity will also increase
customers’ ability to pay for clean energy. Because the availability of clean energy can fluctuate by hour
or season, micro-utilities should selectively stimulate electricity demand that matches these availability
fluctuations. Rather than focusing on just one agricultural product or multiple AVCs grown in the same
season, it may be helpful to stimulate multiple AVCs that provide demand throughout the year. This will
reduce peak demands associated with seasonal loads and increase the micro-grid load factor. Recent
research conducted by CrossBoundary and Energy4Impact found two demand stimulation programs
focusing primarily on home appliances like televisions, speakers, and radios increased average mini-
grid revenue by 18 to 25 percent within a year of implementation.21
Consider implementing demand management. Demand management is a utility practice of directly or
indirectly adjusting their customers’ electricity demand to match available generation capacity. Demand
management allows micro-utilities to increase or reduce demand to match generation, minimizing the
occurrence of micro-grid-wide power outages. Demand management can be achieved through technical
interventions, such as disconnecting non-priority loads during peak times or adding deferrable loads
during non-peak times, or through economic incentives, such as time-of-day tariff pricing. When using
tariffs to incentivize consumers to shift their demand to non-peak times, it is important to identify which
customers can easily shift their electricity consumption.15
Agricultural loads may be better suited to
AGRICULTURE-SPECIFIC
RECOMMENDATIONS FOR PROFITABLE
MICRO-GRID OPERATION
18. 16
this than other productive loads. Mills and pumps, for instance, might be able to shift their electricity
consumption to times of high clean energy availability more easily than, say, restaurants, whose
customers require service at set times.
Grow the micro-grid to match demand. Predicting initial demand is difficult when the community served
has no previous electrical consumption data, and predicting how that demand will grow over the life of
the micro-grid is even more difficult. Research has noted initial annual demand growth to range between
12 percent22
and 25 percent23
when utilities first moved into unelectrified areas in South Africa and other
African and Asian countries. Another paper looking at newly grid-connected rural Kenyan customers
noted per-household consumption more than quadrupled over the initial five months after connection,
and then grew at 32 percent and 17 percent for the next two years, respectively.24
This wide range of
demand growth means that instead of sizing a generation plant and distribution network for uncertain
and likely incorrect future demand, micro-grid developers should start small and rapidly respond to
growth in demand. This allows micro-utilities to minimize their initial capital investment, minimize the
installation of under-utilized infrastructure, and match community demand as it grows organically.
Some generation technologies are inherently modular, like solar and wind, which allows easy addition of
generation capacity. Hybridizing a dispatchable source, like diesel, petrol, biomass, or biogas generators
with non-dispatchable energy sources, like solar, wind, and hydro, provides micro-utilities flexibility when
scheduling plant expansion. As the mini-grid’s electricity demand exceeds the generational capacity
of the non-dispatchable sources, the dispatchable generator’s daily operation will increase, raising
operational costs but forestalling the need for immediate plant expansion.
Diversify revenue. Micro-utilities should leverage revenue streams besides electricity to maximize
overall profitability. For example, Husk Power sells both carbon credits and incense sticks made from
gasifier ash to generate extra revenue. Other by-products of clean energy generation include biochar,
a soil additive created by biomass gasifiers that increases nutrient retention and biodigester slurry,
a fertilizer substitute created by biogas plants. Solar and wind power plants frequently have unused
generation capacity whenever plant batteries are completely charged. Turning on intermittent loads,
like water pumping when solar or wind plants have excess generation capacity, can create additional
revenue for the micro-utility. This intermittent electricity supply can be marketed as a distinct, low-
cost product.
Recommendations for International Donors
Specific examples of how international donors can support micro-grids for agricultural
loads include:
Work with national governments to create strategic energy plans for rural agricultural areas. These
plans include integrated resource planning, least-cost electricity analysis, and inclusion of the private
sector to identify ways to provide affordable electricity to un- and under-electrified communities.
Governments may fail to realize that micro-utilities can help them sustainably and affordably meet
their national electrification goals.10
In certain cases, micro-grids can supply lower-cost electricity
19. 17
than a regional utility could supply through grid expansion. This integrated planning can improve the
developmental outcomes of public sector electrification policies by adopting a joint approach with the
private sector.
Ensure that governments understand the need for complementary infrastructure (electricity, roads,
water, and telecommunications) to support AVCs within rural communities.13
Increased access to
electricity does not automatically translate into wealthier farmers and communities. If farmers do not
have increased access to a market, water, or other inputs, they will not be able to convert electricity into
more crops that reach the market. Without access to telecommunications, rural communities will not
be able to learn about new farming techniques and products that improve productivity. When electricity,
road, water, and telecommunications infrastructure are provided together, rural communities are able
to capture more value within their respective AVCs.
Provide micro-grid-specific initial market research and AVC mapping. Access to market intelligence
will allow micro-grid developers to formulate a proper demand stimulation strategy.10
Support electrification efforts and micro-grid viability by providing the foundation required for
agribusiness creation.13
The local workforce can be developed through skills training and micro-
entrepreneur support.25
Entrepreneurial skills training on bookkeeping and business management,
quality standards, supply chain development, and electrically-powered technologies that can create
value within the agricultural sector will be the foundation of any small- or medium-sized agribusiness
started in the community.
Solar PV installations can convert sunlight to useable electricity for communities dependent upon
micro-grids. Photo courtesy of Powering Agriculture.
20. 18
CONCLUSION
Agricultural value chains represent a key part of the economies within rural, off-grid communities.
Micro-grid-powered agricultural loads can both increase agricultural production and allow rural
communities to capture more income from the crops they already produce. At the same time, increased
utilization can help drive down the cost of energy and facilitate a more financially viable micro-utility.
By powering agricultural loads, micro-utilities serve the needs of the community while helping to ensure
their sustainability.
However, the stimulation of agricultural loads must be implemented strategically. Without care in
system design, intermittent agricultural loads may actually increase the cost of energy. Improper
equipment selection or system sizing can result in technical issues that fail to deliver the planned
agricultural services.
There are many ways that international donors can help micro-utilities better serve rural, agricultural-
based communities. They can, for example, support the development of national off-grid electrification
plans that identify micro-grids as a strategic resource, back micro-grid-specific market research
and AVC research within rural communities, and support community workforce development and
entrepreneurship support programs.
Micro-utilities should evaluate local agricultural loads as part of their community assessment.
This means identifying all AVCs present within a community and stimulating loads that are part of
multiple complementary AVCs that will secure the constant utilization of the micro-grid throughout the
year. Demand management can help micro-utilities improve their load factors either through technical
means or time-of-day pricing.
Micro-utilities can reduce their LCOE across multiple sites by taking advantage of economies
of scale in site planning, financing, company administration, procurement, and operation and
maintenance. Operating multiple micro-grid sites allows for the diversification of revenue streams;
the profit of one site can offset the temporary losses of another site. As electricity demand in off-
grid communities grows, micro-utilities should right-size their micro-grids and expect to grow their
generation to match demand.
These recommendations can help ensure that rural, off-grid communities have increased access
to electricity and the opportunity to grow their communities’ economies through the industry they
understand best: agriculture.
21. 19
1. Practical Action, Poor People’s Energy Outlook 2020: Energy for Earning a Living (Rugby: Practical Action
Publishing, 2012), http://www.globalbioenergy.org/uploads/media/1203_-_Practical_Action_-_Poor_people_
energy_outlook_2012.pdf.
2. Food and Agriculture Organization of the United Nations, FAO Statistical Yearbook 2013: World Food
and Agriculture (Rome: Food and Agriculture Organization of the United Nations, June 2013),
http://www.fao.org/3/i3107e/i3107e.PDF.
3. World Bank Group, Agriculture, Forestry, and Fishing, Value Added (% of GDP) (indicator NV.AGR.TOTL.ZS), 2011,
https://data.worldbank.org/indicator/NV.AGR.TOTL.ZS.
4. Ralph Sims, Alessandro Flammini, Manas Puri, and Stefania Bracco, “Energy-Smart” Food for People and Climate,
(Rome: Food and Agriculture Organization of the United Nations, June 2012), http://www.fao.org/3/a-i2454e.
pdf.
5. Powering Agriculture: An Energy Grand Challenge for Development, “Powering Agriculture Fact Sheet,” March
2016, https://poweringag.org/sites/default/files/PAEGC-factsheet-3mar16.pdf.
6. Headley Jacobus, The Energy and Agriculture Virtuous Cycle, figure, 2019.
7. Innovation Energie Développement, Identifying the Gaps and Building the Evidence Base on Low Carbon Mini-Grids
(Francheville: Innovation Energie Développement, January 2013), https://www.gov.uk/dfid-research-outputs/
support-study-for-dfid-low-carbon-mini-grids-identifying-the-gaps-and-building-the-evidence-base-on-low-carbon-
mini-grids-final-report#citation
8. Itamar Orlandi, Takehiro Kawahara, Dario Traum, and Michael Wilshire, Powering the Last Billion,
(Bloomberg New Energy Finance, June 2018).
9. Itamar Orlandi, “Micro-grids in a Changing Power System” (Keynote presentation, Asia Energy Storage
Conference, Singapore, November 6, 2018).
10. International Finance Corporation, From Gap to Opportunity: Business Models for Scaling Up Energy
Access (International Finance Corporation, May 2012), http://documents.worldbank.org/curated/
en/925951468178453757/pdf/726950WP0v20Ex00Box385269B00PUBLIC0.pdf.
11. James Cust, Anoop Singh, and Karsten Neuhoff, “Rural Electrification in India: Economic and Institutional
Aspects of Renewables,” Social Science Research Network Journal (December 2007), https://doi.org/10.2139/
ssrn.2760810.
12. Energy Sector Management Assistance Program, Mini Grids for Half a Billion People: Market Outlook and
Handbook for Decision Makers (Washington: The International Bank for Reconstruction and Development/
World Bank Group, June 2019), http://hdl.handle.net/10986/31926.
13. Robert E. Fishbein, Survey of Productive Uses of Electricity in Rural Areas (Washington: World Bank Group,
April 2003), https://ledsgp.org/wp-content/uploads/2015/07/survey-of-productive-uses-of-electricity.pdf.
14. Jerome Weingart and Daniele Giovannucci (ed.), Rural Energy: A Practical Primer for Productive
Applications (Washington: World Bank Group, January 2004), http://documents.worldbank.org/curated/
en/249461468136491199/Rural-energy-a-practical-primer-for-productive-applications.
15. Samuel Booth, Xiangkun Li, Ian Baring-Gould, Diana Kollanyi, Abishek Bharadwaj, and Peter Weston,
Productive Use of Energy in African Microgrids: Technical and Business Considerations (Golden, Colorado:
National Renewable Energy Laboratory, August 2018), https://doi.org/10.13140/RG.2.2.33933.79847.
REFERENCES
22. 20
16. Matthew Tilleard, Gabriel Davies, and Lucy Shaw, “Minigrids Are the Cheapest Way to Bring Electricity to
100 Million Africans Today,” Greentech Media, April 20, 2018, https://www.greentechmedia.com/articles/read/
minigrids-are-the-cheapest-way-to-electrify-100-million-africans-today.
17. International Finance Corporation, Benchmarking Mini-Grid DESCOS 2017 Update: Summary of Findings
(International Finance Corporation, May 2018), https://www.ifc.org/wps/wcm/connect/87b7df8f-94da-43ed-
b168-3099b1edff45/IFC+Mini-grid+DESCO+Benchmarking+2017+Update.pdf?MOD=AJPERES&CVID=mnZVIZu.
18. Courtney Blodgett, Emily Moder, Lauren Kickham, and Harrison Leaf, Powering Productivity: Early Insights into Mini
Grid Operations in Rural Kenya (Vulcan Impact Investing, October 2016), https://www.vulcan.com/medialibraries/
vulcan/documents/kenya-mini-grids-white-paper-vi2.pdf.
19. April Allderdice and John H. Rogers, Renewable Energy for Microenterprise (Golden, Colorado: National Renewable
Energy Laboratory, November 2000), https://www.researchgate.net/publication/236355660_Renewable_Energy_
for_Microenterprise.
20. Brian Gurr and Allison Archambault, Viable Productive Uses of Electricity Programs Remain Elusive: A Practitioner’s
Field-Based Recommendations for Overcoming Challenges (Washington: EarthSpark International, July 2018),
http://www.earthsparkinternational.org/uploads/1/3/4/4/13442473/earthspark_productive_uses_of_electricity_
practitioner_perspective_july_2018.pdf.
21. CrossBoundary, Innovation Insight: Appliance Financing (Nairobi: CrossBoundary, August 2019), https://www.
crossboundary.com/wp-content/uploads/2019/08/CrossBoundary-Innovation-Lab-Innovation-Insight-Appliance-
Financing-Final-07-Aug-2019-1.pdf.
22. C.T. Gaunt, “Meeting Electrification’s Social Objectives in South Africa, and Implications for Developing
Countries,” Energy Policy 33, no. 10 (July 2005): 1309-1317, https://doi.org/10.1016/j.enpol.2003.12.007.
23. François Lepicard, Olivier Kayser, Jessica Graf, Simon Brossard, Adrien Darodes de Tailly, and Lucie Klarsfeld
McGrath, Reaching Scale in Access to Energy: Lessons from Practitioners (Hystra, August 2017), https://www.adb.
org/sites/default/files/publication/372436/access-energy-lessons.pdf.
24. Simone Fobi, Varun Deshpande, Samson Ondiek, Vijay Modi, and Jay Taneja, “A Longitudinal Study of Electricity
Consumption Growth in Kenya,” Energy Policy 123, (December 2018). 569-578. https://doi.org/10.1016/j.
enpol.2018.08.065.
25. Hisham Zerriffi, Sam Hargadine, Jessica Gajarsa, and Joseph Schumacher, Synthesis Report: Decentralized Energy
Portfolio Review (Washington: Management Systems International, A Tetra Tech Company for the United States
Agency for International Development, November 2016), https://pdf.usaid.gov/pdf_docs/pbaaf014.pdf.
23. 21
This study was made possible through the support of the Powering Agriculture: An Energy Grand Challenge for
Development Partners, which comprise the United States Agency for International Development (USAID), the
Swedish Government, the German Federal Ministry for Economic Cooperation and Development (BMZ), Duke
Energy, and the Overseas Private Investment Corporation (OPIC).
Further information about Powering Agriculture can be found at PoweringAg.org
DISCLAIMER
This study is made possible by the support of the American People through the United States Agency for
International Development (USAID). The contents of this study are the sole responsibility of Tetra Tech ES, Inc.
and do not necessarily reflect the views of USAID or the United States Government. It was prepared by Tetra
Tech ES, Inc. under the Powering Agriculture Support Task Order.
AUTHORS
This case study was written by Dr. Augusta Abrahamse, Program Manager of Powering Agriculture: An Energy
Grand Challenge for Development, and Headley Jacobus and Mikael Matossian from Tetra Tech ES, Inc.
PV panels atop a structure capturing sunlight to be converted to energy. Photo courtesy of Powering Agriculture.