Manufacturing of pe fabric by utilizing the household pe waste
•Download as PPTX, PDF•
0 likes•49 views
This presentation proposes a method to manufacture PE fabric from household PE waste in 3 steps: 1. Collect and segregate PE waste from household trash through manual sorting and density separation. 2. Form PE pellets from the recycled waste and use melt spinning to create filaments. 3. Use a non-woven process to produce low-cost PE fabric and ultimately reduce environmental impact from household waste.
Report
Share
Report
Share
![A Presentation on
Manufacturing of PE fabric by utilizing the household
PE waste
INSTITUTE OF CHEMICAL TECHNOLOGY, MUMBAI 1
Presented by:
Kanhaya lal Kumawat [19TXT205]](https://image.slidesharecdn.com/manufacturingofpefabricbyutilizingthehouseholdpewaste-191125111334/85/Manufacturing-of-pe-fabric-by-utilizing-the-household-pe-waste-1-320.jpg)
Recommended
Plastic bags & environment( abdul1)
This document discusses plastic waste management issues and solutions in India. It notes that while plastics have beneficial properties, thin plastic bags and other single-use plastics have created solid waste problems due to improper disposal. Solutions discussed include segregating waste at source, incentivizing recycling, encouraging technologies like cement kiln co-processing of plastics, and implementing uniform regulations on plastic bags. Case studies show examples of effective waste segregation and management programs. The recommendations call for stronger packaging waste rules, better implementation of waste management policies, uniform bag thickness rules, and more support for recycling activities.
Future of plastic_recycling_full_with_environmental_impact_and_agplastics_slides
The document discusses a new plastic recycling technology called JET that can transform mixed, contaminated plastic waste into high-value end products. It notes that currently less than 10% of plastic waste is recycled due to issues with sorting and purity requirements. JET claims it can accept and recycle virtually all plastic waste regardless of type or contamination by directly manufacturing products from the mixed materials. This allows it to create value from plastic films and flexible packaging that typically have low recycling rates. JET aims to establish regional facilities near plastic waste sources to create a circular economy.
Bioplastic from food waste
This includes all you wanted to know about bioplastic. what is bioplastic?
How it made?
What type of bioplastic available?
and where it is used.
Converting Waste Plastics into Fuel
The document discusses UNEP's 3-year project to convert waste plastics into fuel in order to address the growing problem of plastic waste. The project aims to build local capacity to identify appropriate waste plastic conversion technologies, assess feasibility, and reduce greenhouse gas emissions. Three cities - Nakhon Ratchasima, Phitsanulok, and Cebu Municipality - participated in pilot projects to convert waste plastics into pellets, liquid fuel, and solid fuel respectively. The project also produced guidelines on plastic waste assessment and identified appropriate conversion technologies.
Plastic recycling
The document discusses the treatment and recycling of plastic. It describes the plastic recycling process which includes 6 steps: collection, sorting, washing, resizing, identification and separation, and compounding. Common plastics like PET (#1) and HDPE (#2) are easier to recycle and can be made into new products like bottles, fibers, and plastic lumber. Recycling plastic provides benefits like reducing waste, conserving energy, saving money, creating jobs, and providing a sustainable source of raw materials to industry.
RECYCLING THE WASTE PLASTIC MATERIAL WITH THE HELP OF HEAT TREARTMENT
The document is a project report submitted for a degree in mechanical engineering. It discusses recycling waste plastic material through heat treatment. The objectives are to study the effect of sulfuric acid treatment on zeolite catalyst characteristics and its use in waste polypropylene pyrolysis. It aims to optimize the process to produce liquid fuel from different plastics and characterize the fuel properties. The report also examines engine performance and emissions from the waste plastic fuel. It scopes thermal and catalytic pyrolysis of plastics like polypropylene, low density polyethylene, and polystyrene to produce liquid fuels using kaolin activated catalyst. The methodology involves pyrolyzing plastic waste at 200-350°C in a reactor to produce similar diesel-like
Environmental benefits of re-usable food packaging
Environmental benefits of re-usable food packagingNatural Resources Institute Finland (Luke) / Luonnonvarakeskus (Luke)
The document analyzes the environmental benefits of reusable food packaging compared to single-use plastic packaging. It finds that reusable packaging decreases CO2 emissions. Specifically, a reusable box reused 100 times reduces CO2 emissions by 76% compared to a single-use box if recycled at end of life, and reduces emissions by 94.69% compared to a single-use box if incinerated at end of life. Recycling provides better environmental benefits than incineration as an end of life option. However, 100% recycling is not possible in practice. The energy sources and customer reuse behavior also influence the final results.Plastic Waste Management and Recycling Technology : P2
To emphasize the reduced use of plastic and the beneficial management of plastic waste. Efficient transformation of plastic into energy and fuel. Making our environment an eco friendly zone. Modify the design of recycling Machines. Install the recycling unit at TNAU. Compare the envi.factors of Coimbatore with other cities. Making our Eco fest - 15------Plastic free & Models
Recommended
Plastic bags & environment( abdul1)
This document discusses plastic waste management issues and solutions in India. It notes that while plastics have beneficial properties, thin plastic bags and other single-use plastics have created solid waste problems due to improper disposal. Solutions discussed include segregating waste at source, incentivizing recycling, encouraging technologies like cement kiln co-processing of plastics, and implementing uniform regulations on plastic bags. Case studies show examples of effective waste segregation and management programs. The recommendations call for stronger packaging waste rules, better implementation of waste management policies, uniform bag thickness rules, and more support for recycling activities.
Future of plastic_recycling_full_with_environmental_impact_and_agplastics_slides
The document discusses a new plastic recycling technology called JET that can transform mixed, contaminated plastic waste into high-value end products. It notes that currently less than 10% of plastic waste is recycled due to issues with sorting and purity requirements. JET claims it can accept and recycle virtually all plastic waste regardless of type or contamination by directly manufacturing products from the mixed materials. This allows it to create value from plastic films and flexible packaging that typically have low recycling rates. JET aims to establish regional facilities near plastic waste sources to create a circular economy.
Bioplastic from food waste
This includes all you wanted to know about bioplastic. what is bioplastic?
How it made?
What type of bioplastic available?
and where it is used.
Converting Waste Plastics into Fuel
The document discusses UNEP's 3-year project to convert waste plastics into fuel in order to address the growing problem of plastic waste. The project aims to build local capacity to identify appropriate waste plastic conversion technologies, assess feasibility, and reduce greenhouse gas emissions. Three cities - Nakhon Ratchasima, Phitsanulok, and Cebu Municipality - participated in pilot projects to convert waste plastics into pellets, liquid fuel, and solid fuel respectively. The project also produced guidelines on plastic waste assessment and identified appropriate conversion technologies.
Plastic recycling
The document discusses the treatment and recycling of plastic. It describes the plastic recycling process which includes 6 steps: collection, sorting, washing, resizing, identification and separation, and compounding. Common plastics like PET (#1) and HDPE (#2) are easier to recycle and can be made into new products like bottles, fibers, and plastic lumber. Recycling plastic provides benefits like reducing waste, conserving energy, saving money, creating jobs, and providing a sustainable source of raw materials to industry.
RECYCLING THE WASTE PLASTIC MATERIAL WITH THE HELP OF HEAT TREARTMENT
The document is a project report submitted for a degree in mechanical engineering. It discusses recycling waste plastic material through heat treatment. The objectives are to study the effect of sulfuric acid treatment on zeolite catalyst characteristics and its use in waste polypropylene pyrolysis. It aims to optimize the process to produce liquid fuel from different plastics and characterize the fuel properties. The report also examines engine performance and emissions from the waste plastic fuel. It scopes thermal and catalytic pyrolysis of plastics like polypropylene, low density polyethylene, and polystyrene to produce liquid fuels using kaolin activated catalyst. The methodology involves pyrolyzing plastic waste at 200-350°C in a reactor to produce similar diesel-like
Environmental benefits of re-usable food packaging
Environmental benefits of re-usable food packagingNatural Resources Institute Finland (Luke) / Luonnonvarakeskus (Luke)
The document analyzes the environmental benefits of reusable food packaging compared to single-use plastic packaging. It finds that reusable packaging decreases CO2 emissions. Specifically, a reusable box reused 100 times reduces CO2 emissions by 76% compared to a single-use box if recycled at end of life, and reduces emissions by 94.69% compared to a single-use box if incinerated at end of life. Recycling provides better environmental benefits than incineration as an end of life option. However, 100% recycling is not possible in practice. The energy sources and customer reuse behavior also influence the final results.Plastic Waste Management and Recycling Technology : P2
To emphasize the reduced use of plastic and the beneficial management of plastic waste. Efficient transformation of plastic into energy and fuel. Making our environment an eco friendly zone. Modify the design of recycling Machines. Install the recycling unit at TNAU. Compare the envi.factors of Coimbatore with other cities. Making our Eco fest - 15------Plastic free & Models
FIRST REVIEW FP.pptx
The document summarizes a student project to develop a fabric from Calotropis fibers as an eco-friendly and cost-effective alternative to wool. The project aims to extract Calotropis fibers and blend them with organic cotton to produce a knitted fabric. The methodology involves drying and retting the Calotropis fibers, blending them at a 1:1 ratio with organic cotton, carding and spinning the blend into yarn, and knitting the yarn into fabric. The novelty is that a plant considered a weed can be used as a low-cost alternative to reduce the environmental impacts of wool production. A literature review found methods for better fiber extraction and properties of Calotropis that indicate its potential for
DEVELOPMENT OF YARN FROM PINE NEEDLE FIBER
This document discusses developing yarn from pine needle fiber. The authors extracted fiber from dried pine leaves and characterized the collected fiber. They then produced yarn from the fiber. Properties of the resulting pine cotton blend yarn and 100% cotton yarn were compared in terms of various metrics like denier value, unevenness, tenacity, and elongation percentage. The pine cotton blend yarn had a higher denier value and unevenness than cotton yarn, resulting in lower strength. However, its elongation percentage was higher. The document concludes it may be possible to use pine cotton blend yarn in heavy fabrics, decorative textiles, and non-wovens.
Sustainability in Textile Industry
The document discusses sustainability in the textile industry. It outlines several challenges faced by the industry related to waste generation and resource use. Some ways to increase sustainability mentioned include adopting circular economy principles, initiatives like Better Cotton and Cradle to Cradle, and innovating processes to reduce water and chemicals. Effluent treatment plants can help treat wastewater from production to allow water recycling and reuse.
Recycling & Management of Textile Waste
What is Waste?
Waste is undesirable, unwanted material which is inevitable & any type of material which we throw.
Types of Waste -
1 Preconsumer Waste - is a material that was discarded before it was ready for consumer use. Pre-consumer recycled materials can be broken down and remade into similar or different materials, or can be sold "as is" to third party buyers who then use those materials for consumer products. Preconsumer textile waste usually refers to waste by-products from fiber, yarn, textile, and apparel manufacturing. It can be mill ends, scraps, clippings, or goods damaged during production, and most is reclaimed and reused as raw materials for the automotive, furniture, mattress, coarse yarn, home furnishing, paper, and other industries
2 Postconsumer Waste -
Postconsumer textile waste usually refers to any product that the individual no longer needs and decides to discard due to wear or damage and normally includes used or worn clothing, bed linens, towels, and other consumer textiles. Postconsumer waste which can be recovered are clothing, drapes/curtains, towels, sheets and blankets, clean rags and sewing remnants, table cloths belts hand bags paired shoes and socks.
Sustainability_in_Textile_Industry.pptx
The document discusses sustainability in the textile industry. It outlines several challenges faced by the industry related to waste generation and resource use. Some key issues are water and energy waste, hazardous chemicals, and health risks for workers. The document then discusses approaches to improve sustainability, such as reducing waste through practices like the 3R's and more efficient production processes. It also covers initiatives for more sustainable cotton farming and effluent treatment plants to reuse water. The goal of these various efforts is to move the industry toward a circular economy model.
Investigating the Mechanical Properties of Polyester-Natural Fiber Composite
This document summarizes research investigating the mechanical properties of composites made from polyester reinforced with natural fibers like cotton and jute. It describes how samples of polyester composite with varying amounts of glass fiber, cotton, and jute fiber were produced using compression molding. The composites were then tested to evaluate properties such as hardness, tensile strength, flexural strength, impact strength, and water absorption. The results showed that composites with higher amounts of cotton and jute fibers generally had higher strength and stiffness but also increased water absorption compared to the glass fiber composite. The research demonstrated that natural fiber composites can be a sustainable alternative to glass fiber composites.
Presentstion applied plastic recycling
Plastic recycling is the process of recovering scrap plastic and reprocessing it into useful products to reduce plastic waste. Common recycled plastics include polyethylene terephthalate (PET), high-density polyethylene (HDPE), polyvinyl chloride (PVC), and low-density polyethylene (LDPE). The plastic recycling process involves collection, sorting, shredding, cleansing, melting, and pelletizing of plastic materials. Recycling plastic provides benefits like conservation of resources, reduced pollution, and encourages a more sustainable lifestyle.
RECYCLING OF TEXTILE WASTE
Textile recycling is the process by which old clothing and other textiles are recovered for reuse or material recovery. It is the basis for the textile recycling industry. ... The basis for the growing textile recycling industry is, of course, the textile industry itself.
Recycling of Plastics
Plastic recycling is the process of recovering scrap or waste plastic and reprocessing it into useful products. There are several reasons for plastic recycling including reducing waste in landfills, reclaiming the energy used to originally make the plastic, and reducing environmental damage from incineration. The plastic recycling process involves collection, cleaning, sorting, size reduction, melting, extrusion, cooling, pelletization and then manufacturing new products using injection molding, blow molding or film blowing. Scientists are also researching biodegradable plastics that can help reduce waste and environmental impacts compared to traditional recycling methods.
Recycling of PET waste bottle to textile valuable product.
As PET bottle is non biodegradable and cause many several major problem to nature to overcome of it such project are every useful.
Cellulose activation
The document discusses cellulose activation through mechanical and enzymatic treatments to enhance its accessibility and reactivity. Specifically, it investigates:
1) Using mechanical shredding and enzymatic treatments to open cellulose fibre structures.
2) How these pretreatments increase porosity and surface area, enabling better solubility in solvents like NaOH/ZnO.
3) Promising results so far in developing sustainable aqueous dissolution systems for dissolving pulps to produce regenerated cellulose fibres.
PLASTIC RECYCLING and to reduce the waste landfill
plastic is a useful material, unlike it`s usage we have several drawbacks, to reduce this we need to recycle the plastic.
Plastic Recycling in Sri Lanka
This document discusses plastic recycling in Sri Lanka. It details the recycling process which involves sorting, washing, shredding and extruding plastic materials. It notes that plastic recycling is a highly polluting industry that emits toxic fumes and dissolved compounds. While larger recyclers now separate materials more cleanly, small recyclers lack proper treatment facilities. The document recommends increasing public awareness, government oversight of the industry, and reducing plastic use to improve sustainability of plastic recycling in Sri Lanka.
Carbios : le recyclage enzymatique des plastiques
Monsieur Bruno Langlois, Business développement and partnership director, présente la société CARBIOS, entreprise Clermontoise de chimie biologique, spécialisée dans la conception et le développement de procédés enzymatiques en vue d’une biodégradation et un bio recyclage des matières plastiques
IRJET- Sustainable Cotton Poly Blended Woven Fabric with Anti Pilling Finish
This document discusses the development of a sustainable cotton-poly blended woven fabric made from pre-consumer and post-consumer waste. The fabric is treated with an anti-pilling finish to reduce pilling that occurs due to the recycled yarns. Testing shows the recycled fabric with anti-pilling finish meets acceptable standards for color fastness, dimensional stability, pilling resistance, tensile strength, and tear strength. The sustainable fabric provides benefits like reduced costs, lead times, and environmental impacts from reduced dye, energy, and water usage compared to regular fabrics. Further commercial adoption is recommended to promote more sustainable fashion industry practices.
Pakkaussuunnittelun rooli elintarvikepakkauksiin liittyvien ympäristövaikutus...
Pakkaussuunnittelun rooli elintarvikepakkauksiin liittyvien ympäristövaikutus...Natural Resources Institute Finland (Luke) / Luonnonvarakeskus (Luke)
The document summarizes a study that investigated the environmental impacts of novel packaging materials compared to conventional plastic packaging. The study looked at reducing impacts through package design changes like using less material, replacing plastics with fibers, and developing new materials. It analyzed demo cases of different packaging alternatives and their life cycles. The results found that a recyclable plastic and a new material based on modified PLA had lower carbon footprints than conventional plastic or current fiber-based packaging. The end-of-life scenario significantly impacted the results, with fiber-based packaging having a lower footprint than plastics under incineration but not recycling.Use of Plastic Waste In Road Construction
- The document discusses using plastic waste in road construction as a way to dispose of plastic while improving the properties of bituminous mixes used to build roadways.
- Experiments were conducted replacing 6-8% of bitumen's weight with plastic waste like polythene, polypropylene, and polystyrene. This was found to increase properties like ductility and the melting point of the bitumen mix.
- Tests on mixes using 11.5% milk bag plastic waste found ductility of 76.8 cm, penetration of 47mm, and a softening point of 58.6°C, representing improvements over mixes without plastic waste. Using plastic waste in road construction provides an eco-friendly
Plastic technology
This document discusses different types of plastics, including thermoplastics and thermosetting polymers. It describes why plastics are commonly used in design for their corrosion resistance, ease of forming, and wide range of properties. Additives are discussed to improve plastic characteristics. Facts are presented on large amounts of annual plastic waste generated. Methods of co-processing plastics include collection, segregation, and recovery for material or energy. Applications like plastic roads and clothes are mentioned. While plastics have disadvantages like low strength, they can be used beneficially with proper manufacturing, regulation, and recycling.
Use of Plastic Wastes in Road Construction.ppt
This document discusses the use of plastic waste in road construction as a way to dispose of plastic waste while improving the properties of bituminous road mixes. It notes that plastic waste is a major environmental problem and that burning it causes pollution. The document explains that mixing plastic waste with bitumen can enhance the binding properties of the mix and improve road quality. It provides details on the types of plastic waste that can be used, the process of collecting and shredding the waste, and mixing it into the hot bitumen and aggregate mixture. Test results show the plastic waste improves the compressive and bending strength as well as the impact and abrasion resistance of the mixes. The document concludes that using plastic waste in road construction is an eco
Reuse of textile sluge in concrete
This document summarizes a seminar presentation on reusing textile sludge in concrete. The textile industry produces large amounts of sludge as a byproduct of wastewater treatment. Currently, most sludge is disposed of in landfills. The objectives of the project are to reuse the sludge in concrete to reduce environmental pollution and use resources more efficiently. Testing shows the sludge can be used to replace up to 32% of sand in concrete with little reduction in compressive strength. Using sludge in concrete provides advantages like reducing land and groundwater pollution compared to disposal. Further work could explore using sludge ash in concrete after burning the organic matter.
Sizing
The document discusses sizing of warp yarns, which involves applying a coating to protect the yarns from abrasion during weaving. It focuses on the chemistry and properties of various sizing agents, particularly starches. Starches, which are complex carbohydrates, have been widely used for sizing due to their low cost and ability to form protective films on yarns. However, their films are difficult to remove completely after weaving. The document therefore also examines methods for desizing fabrics, including enzymatic, acid, and oxidative processes to break down starch residues.
Advance textile processing
This document provides information about BSL Ltd., a textile company that manufactures fashion fabrics and wool yarn. It discusses the company's departments including quality control, processing, dyeing, and finishing. It describes the various machines and processes used in quality testing, fabric processing, dyeing, weight reduction, drying, and finishing. Key areas covered include quality control procedures for incoming materials, fabric testing at different stages, shade development, and parameters for dyeing and finishing processes.
More Related Content
Similar to Manufacturing of pe fabric by utilizing the household pe waste
FIRST REVIEW FP.pptx
The document summarizes a student project to develop a fabric from Calotropis fibers as an eco-friendly and cost-effective alternative to wool. The project aims to extract Calotropis fibers and blend them with organic cotton to produce a knitted fabric. The methodology involves drying and retting the Calotropis fibers, blending them at a 1:1 ratio with organic cotton, carding and spinning the blend into yarn, and knitting the yarn into fabric. The novelty is that a plant considered a weed can be used as a low-cost alternative to reduce the environmental impacts of wool production. A literature review found methods for better fiber extraction and properties of Calotropis that indicate its potential for
DEVELOPMENT OF YARN FROM PINE NEEDLE FIBER
This document discusses developing yarn from pine needle fiber. The authors extracted fiber from dried pine leaves and characterized the collected fiber. They then produced yarn from the fiber. Properties of the resulting pine cotton blend yarn and 100% cotton yarn were compared in terms of various metrics like denier value, unevenness, tenacity, and elongation percentage. The pine cotton blend yarn had a higher denier value and unevenness than cotton yarn, resulting in lower strength. However, its elongation percentage was higher. The document concludes it may be possible to use pine cotton blend yarn in heavy fabrics, decorative textiles, and non-wovens.
Sustainability in Textile Industry
The document discusses sustainability in the textile industry. It outlines several challenges faced by the industry related to waste generation and resource use. Some ways to increase sustainability mentioned include adopting circular economy principles, initiatives like Better Cotton and Cradle to Cradle, and innovating processes to reduce water and chemicals. Effluent treatment plants can help treat wastewater from production to allow water recycling and reuse.
Recycling & Management of Textile Waste
What is Waste?
Waste is undesirable, unwanted material which is inevitable & any type of material which we throw.
Types of Waste -
1 Preconsumer Waste - is a material that was discarded before it was ready for consumer use. Pre-consumer recycled materials can be broken down and remade into similar or different materials, or can be sold "as is" to third party buyers who then use those materials for consumer products. Preconsumer textile waste usually refers to waste by-products from fiber, yarn, textile, and apparel manufacturing. It can be mill ends, scraps, clippings, or goods damaged during production, and most is reclaimed and reused as raw materials for the automotive, furniture, mattress, coarse yarn, home furnishing, paper, and other industries
2 Postconsumer Waste -
Postconsumer textile waste usually refers to any product that the individual no longer needs and decides to discard due to wear or damage and normally includes used or worn clothing, bed linens, towels, and other consumer textiles. Postconsumer waste which can be recovered are clothing, drapes/curtains, towels, sheets and blankets, clean rags and sewing remnants, table cloths belts hand bags paired shoes and socks.
Sustainability_in_Textile_Industry.pptx
The document discusses sustainability in the textile industry. It outlines several challenges faced by the industry related to waste generation and resource use. Some key issues are water and energy waste, hazardous chemicals, and health risks for workers. The document then discusses approaches to improve sustainability, such as reducing waste through practices like the 3R's and more efficient production processes. It also covers initiatives for more sustainable cotton farming and effluent treatment plants to reuse water. The goal of these various efforts is to move the industry toward a circular economy model.
Investigating the Mechanical Properties of Polyester-Natural Fiber Composite
This document summarizes research investigating the mechanical properties of composites made from polyester reinforced with natural fibers like cotton and jute. It describes how samples of polyester composite with varying amounts of glass fiber, cotton, and jute fiber were produced using compression molding. The composites were then tested to evaluate properties such as hardness, tensile strength, flexural strength, impact strength, and water absorption. The results showed that composites with higher amounts of cotton and jute fibers generally had higher strength and stiffness but also increased water absorption compared to the glass fiber composite. The research demonstrated that natural fiber composites can be a sustainable alternative to glass fiber composites.
Presentstion applied plastic recycling
Plastic recycling is the process of recovering scrap plastic and reprocessing it into useful products to reduce plastic waste. Common recycled plastics include polyethylene terephthalate (PET), high-density polyethylene (HDPE), polyvinyl chloride (PVC), and low-density polyethylene (LDPE). The plastic recycling process involves collection, sorting, shredding, cleansing, melting, and pelletizing of plastic materials. Recycling plastic provides benefits like conservation of resources, reduced pollution, and encourages a more sustainable lifestyle.
RECYCLING OF TEXTILE WASTE
Textile recycling is the process by which old clothing and other textiles are recovered for reuse or material recovery. It is the basis for the textile recycling industry. ... The basis for the growing textile recycling industry is, of course, the textile industry itself.
Recycling of Plastics
Plastic recycling is the process of recovering scrap or waste plastic and reprocessing it into useful products. There are several reasons for plastic recycling including reducing waste in landfills, reclaiming the energy used to originally make the plastic, and reducing environmental damage from incineration. The plastic recycling process involves collection, cleaning, sorting, size reduction, melting, extrusion, cooling, pelletization and then manufacturing new products using injection molding, blow molding or film blowing. Scientists are also researching biodegradable plastics that can help reduce waste and environmental impacts compared to traditional recycling methods.
Recycling of PET waste bottle to textile valuable product.
As PET bottle is non biodegradable and cause many several major problem to nature to overcome of it such project are every useful.
Cellulose activation
The document discusses cellulose activation through mechanical and enzymatic treatments to enhance its accessibility and reactivity. Specifically, it investigates:
1) Using mechanical shredding and enzymatic treatments to open cellulose fibre structures.
2) How these pretreatments increase porosity and surface area, enabling better solubility in solvents like NaOH/ZnO.
3) Promising results so far in developing sustainable aqueous dissolution systems for dissolving pulps to produce regenerated cellulose fibres.
PLASTIC RECYCLING and to reduce the waste landfill
plastic is a useful material, unlike it`s usage we have several drawbacks, to reduce this we need to recycle the plastic.
Plastic Recycling in Sri Lanka
This document discusses plastic recycling in Sri Lanka. It details the recycling process which involves sorting, washing, shredding and extruding plastic materials. It notes that plastic recycling is a highly polluting industry that emits toxic fumes and dissolved compounds. While larger recyclers now separate materials more cleanly, small recyclers lack proper treatment facilities. The document recommends increasing public awareness, government oversight of the industry, and reducing plastic use to improve sustainability of plastic recycling in Sri Lanka.
Carbios : le recyclage enzymatique des plastiques
Monsieur Bruno Langlois, Business développement and partnership director, présente la société CARBIOS, entreprise Clermontoise de chimie biologique, spécialisée dans la conception et le développement de procédés enzymatiques en vue d’une biodégradation et un bio recyclage des matières plastiques
IRJET- Sustainable Cotton Poly Blended Woven Fabric with Anti Pilling Finish
This document discusses the development of a sustainable cotton-poly blended woven fabric made from pre-consumer and post-consumer waste. The fabric is treated with an anti-pilling finish to reduce pilling that occurs due to the recycled yarns. Testing shows the recycled fabric with anti-pilling finish meets acceptable standards for color fastness, dimensional stability, pilling resistance, tensile strength, and tear strength. The sustainable fabric provides benefits like reduced costs, lead times, and environmental impacts from reduced dye, energy, and water usage compared to regular fabrics. Further commercial adoption is recommended to promote more sustainable fashion industry practices.
Pakkaussuunnittelun rooli elintarvikepakkauksiin liittyvien ympäristövaikutus...
Pakkaussuunnittelun rooli elintarvikepakkauksiin liittyvien ympäristövaikutus...Natural Resources Institute Finland (Luke) / Luonnonvarakeskus (Luke)
The document summarizes a study that investigated the environmental impacts of novel packaging materials compared to conventional plastic packaging. The study looked at reducing impacts through package design changes like using less material, replacing plastics with fibers, and developing new materials. It analyzed demo cases of different packaging alternatives and their life cycles. The results found that a recyclable plastic and a new material based on modified PLA had lower carbon footprints than conventional plastic or current fiber-based packaging. The end-of-life scenario significantly impacted the results, with fiber-based packaging having a lower footprint than plastics under incineration but not recycling.Use of Plastic Waste In Road Construction
- The document discusses using plastic waste in road construction as a way to dispose of plastic while improving the properties of bituminous mixes used to build roadways.
- Experiments were conducted replacing 6-8% of bitumen's weight with plastic waste like polythene, polypropylene, and polystyrene. This was found to increase properties like ductility and the melting point of the bitumen mix.
- Tests on mixes using 11.5% milk bag plastic waste found ductility of 76.8 cm, penetration of 47mm, and a softening point of 58.6°C, representing improvements over mixes without plastic waste. Using plastic waste in road construction provides an eco-friendly
Plastic technology
This document discusses different types of plastics, including thermoplastics and thermosetting polymers. It describes why plastics are commonly used in design for their corrosion resistance, ease of forming, and wide range of properties. Additives are discussed to improve plastic characteristics. Facts are presented on large amounts of annual plastic waste generated. Methods of co-processing plastics include collection, segregation, and recovery for material or energy. Applications like plastic roads and clothes are mentioned. While plastics have disadvantages like low strength, they can be used beneficially with proper manufacturing, regulation, and recycling.
Use of Plastic Wastes in Road Construction.ppt
This document discusses the use of plastic waste in road construction as a way to dispose of plastic waste while improving the properties of bituminous road mixes. It notes that plastic waste is a major environmental problem and that burning it causes pollution. The document explains that mixing plastic waste with bitumen can enhance the binding properties of the mix and improve road quality. It provides details on the types of plastic waste that can be used, the process of collecting and shredding the waste, and mixing it into the hot bitumen and aggregate mixture. Test results show the plastic waste improves the compressive and bending strength as well as the impact and abrasion resistance of the mixes. The document concludes that using plastic waste in road construction is an eco
Reuse of textile sluge in concrete
This document summarizes a seminar presentation on reusing textile sludge in concrete. The textile industry produces large amounts of sludge as a byproduct of wastewater treatment. Currently, most sludge is disposed of in landfills. The objectives of the project are to reuse the sludge in concrete to reduce environmental pollution and use resources more efficiently. Testing shows the sludge can be used to replace up to 32% of sand in concrete with little reduction in compressive strength. Using sludge in concrete provides advantages like reducing land and groundwater pollution compared to disposal. Further work could explore using sludge ash in concrete after burning the organic matter.
Similar to Manufacturing of pe fabric by utilizing the household pe waste (20)
Investigating the Mechanical Properties of Polyester-Natural Fiber Composite
Investigating the Mechanical Properties of Polyester-Natural Fiber Composite
Recycling of PET waste bottle to textile valuable product.
Recycling of PET waste bottle to textile valuable product.
PLASTIC RECYCLING and to reduce the waste landfill
PLASTIC RECYCLING and to reduce the waste landfill
IRJET- Sustainable Cotton Poly Blended Woven Fabric with Anti Pilling Finish
IRJET- Sustainable Cotton Poly Blended Woven Fabric with Anti Pilling Finish
Pakkaussuunnittelun rooli elintarvikepakkauksiin liittyvien ympäristövaikutus...
Pakkaussuunnittelun rooli elintarvikepakkauksiin liittyvien ympäristövaikutus...
More from kanhaiya kumawat
Sizing
The document discusses sizing of warp yarns, which involves applying a coating to protect the yarns from abrasion during weaving. It focuses on the chemistry and properties of various sizing agents, particularly starches. Starches, which are complex carbohydrates, have been widely used for sizing due to their low cost and ability to form protective films on yarns. However, their films are difficult to remove completely after weaving. The document therefore also examines methods for desizing fabrics, including enzymatic, acid, and oxidative processes to break down starch residues.
Advance textile processing
This document provides information about BSL Ltd., a textile company that manufactures fashion fabrics and wool yarn. It discusses the company's departments including quality control, processing, dyeing, and finishing. It describes the various machines and processes used in quality testing, fabric processing, dyeing, weight reduction, drying, and finishing. Key areas covered include quality control procedures for incoming materials, fabric testing at different stages, shade development, and parameters for dyeing and finishing processes.
CCM Lab value
The document discusses the CIE L*a*b* color space, which provides a way to numerically specify and communicate colors. It originated from Hunter's Lab color space model from the 1940s and was updated by CIE in 1976 as CIELAB. L* represents lightness on a black to white scale, while a* and b* represent the color's position between red/green and yellow/blue. Positive a* values indicate more red and positive b* values indicate more yellow. The document uses examples to illustrate how L*a*b* values correspond to specific colors.
The bhopal disaster
The New York Times investigated the 1984 Bhopal gas leak in India that killed thousands. Through over 100 interviews and a review of documents, the Times found numerous irregularities and violations of safety procedures at the Union Carbide plant that likely contributed to the disaster: employees ignored initial leaks, critical safety systems were down for maintenance or inoperable, staff and training were cut back, and there were no effective public warnings. While Union Carbide emphasized safety, the investigation revealed the Bhopal plant was ultimately responsible for its own safety lapses that appeared to cause the deadly gas leak.
Recycled textile Materials
Recycling of textiles has historically been a domestic craft in India but now includes small-scale industries that process imported second-hand clothing into products like yarn, doormats, blankets, and industrial wipers. Extending the lifetime of clothing by just three months through care, repair, and reuse could reduce the environmental impacts of the clothing industry by 5-10% according to UK research organization WRAP. Recycling textiles involves sorting materials for reuse or downcycling into industrial products or landfilling soiled materials.
NaoH table
The document contains a table with information about sodium hydroxide (NaOH) solutions of different concentrations measured by Baume scale grades and percentages by weight. It lists the Baume grade, percentage by weight, specific gravity, grams of NaOH in 1 kg of solution, and grams of NaOH in 1 liter of solution for concentrations ranging from 1.4% to 25%.
Smart textile introduction
Smart textiles are materials and structures that can sense and react to environmental stimuli. There are four main types: passive smart materials that only sense stimuli, active smart materials that can both sense and respond, very smart materials that can sense, respond, and adapt, and materials with artificial intelligence. Smart textiles find applications in sports, healthcare, military, fashion and more. New developments include light-emitting, scent-emitting, shape-shifting, and health-monitoring textiles. Smart textiles have the potential to revolutionize clothing and other fabrics.
Photo thermochromism
Photochromic dyes change color when exposed to UV light and can be used to monitor how long children spend in the sun to prevent sunburn. They react reversibly—returning to their original color when no longer exposed to UV light. Some key types of photochromic dyes used for this purpose include spiropyrans, spironaphtoxazines, and chromenes.
Laboratory safety
This document outlines various laboratory safety guidelines and procedures. It discusses the benefits of safety, as well as general safety practices regarding glassware, chemicals, electricity, heating, personal protective equipment, fire safety, first aid, chemical storage, and waste disposal. Specific hazards are identified, such as incompatible chemicals. The document emphasizes that following safety regulations and having proper training are essential for preventing accidents in the laboratory.
Laboratory management systems
This document outlines the key considerations for laboratory management including the objective, types of laboratories, layout, regulations, and standards. It discusses providing controlled conditions for scientific experiments, technical measurements, research, and sample analysis while conforming to good laboratory practices and safety criteria. Major considerations include design, infrastructure, equipment, quality processes, energy needs, and conforming to regulations, practices, and procedures to ensure safety, security, and reliable results.
Good laboratory practices GLP
GLP (Good Laboratory Practice) is a quality system for non-clinical health and environmental safety studies. It aims to ensure quality, uniformity, consistency, reproducibility, traceability, reliability and integrity of test data. Key aspects of GLP include standardized procedures for conducting studies, recording and reporting data, and archiving records and materials. GLP was established after fraud was discovered in toxicology lab data submitted to regulators. Adherence to GLP helps ensure the reliability and integrity of non-clinical safety studies.
VIMOSA
The document outlines the key concepts in developing a VIMOSA including having a clear vision, mission, objectives, and strategy. It also describes doing a SWOT analysis to identify strengths, weaknesses, opportunities, and threats. Various activities are listed like testing, calibration, measurements, training, and monitoring. Calibration details include following manufacturer guidelines, checking for displacement, deviation, overloading, and software/hardware changes. Validation ensures selectivity, linearity, accuracy, precision, sensitivity, range, and limits of detection and quantitation using standard reference materials.
GAS CHROMATOGRAPHY
This document provides an introduction to chromatography, including its invention in 1906 and definition as a method for separating and identifying chemical compounds. It discusses the basic principles of chromatography, which involves the differential movement of mixture components through a stationary and mobile phase. Various types of chromatography are classified and described, including gas chromatography (GC), liquid chromatography, and ion exchange. The key components of a gas chromatograph are also outlined, such as the carrier gas, sample injection system, column, and detectors. [/SUMMARY]
FTIR
Infrared (IR) spectroscopy involves using IR radiation to analyze chemical bonds and molecular structures. The IR spectrum provides information on the types of chemical bonds and functional groups present in a compound. Most commonly, IR spectroscopy measures the absorption of IR radiation by a sample, though emission and reflection can also be used. The technique is widely applied to analyze organic materials, as well as some inorganic and organometallic compounds.
Public goods
This document discusses different types of goods and market failures related to public goods and common resources. It defines excludable and rival goods, and categorizes the four types of goods: private goods, public goods, common resources, and natural monopolies. Public goods are neither excludable nor rival, leading to free-riding problems that prevent private provision. Common resources are rival but not excludable, resulting in overuse without regulation. The document also discusses government solutions like cost-benefit analysis and congestion pricing.
Public goods
This document discusses public goods and their efficient provision. It defines public goods as nonrival and nonexcludable, meaning consumption by one person does not reduce availability to others and it is difficult to prevent others from consuming them. This leads to a free rider problem where people have an incentive to let others pay for public goods while still enjoying the benefits. While private markets fail to efficiently provide public goods due to this issue, government intervention through taxation can potentially solve the free rider problem and lead to more efficient outcomes. The document also discusses the debate around privatizing certain goods and services traditionally provided publicly.
Public goods
This document discusses different types of economic goods and the role of public goods and common resources. It defines public goods as non-excludable and non-rival, which leads to market failure due to free-riding. As a solution, public authorities supply public goods through taxation. Common resources are rival but non-excludable, resulting in overexploitation in the "tragedy of the commons" without regulation or property rights enforced by the public administration. The document concludes that differentiating goods by excludability and rivalry is key to understanding the appropriate role of markets and government.
Patent
The document discusses the process of obtaining a patent in India. It begins by defining what a patent is - an exclusive privilege granted by the government for a limited period of time in exchange for full disclosure of an invention. It then outlines the requirements for an invention to be patentable, such as being novel, non-obvious and industrially applicable. The rest of the document details the patent application process in India, including how to draft a specification, required documents, publication and opposition periods, and examination criteria.
Trade marks and trade names
The document discusses India Post sending a legal notice to Paytm to stop using the word "postcard" in its products, as it is a generic term used in the postal service. Paytm then rebranded the product to "lifafa" which signifies gifting money in an envelope.
The document then provides information on trademarks and intellectual property offices in India. It defines trademarks and their functions in identifying products and quality. It discusses different types of trademarks like well-known, associated, and certification marks. Finally, it outlines who can apply for trademark registration in India, including individuals, companies, partnerships and more.
Related rights
Related rights protect performers, producers, and broadcasting agencies. The Rome Convention of 1961 and WIPO Performances and Phonograms Treaty of 1996 established these rights, which include preventing recordings, broadcasts, and public communications, as well as moral rights. Examples include sporting events and concerts. The minimum duration of protection is 20 years from the end of the year of the performance, recording, or broadcast, though India's laws provide 25 years of protection for broadcasts and 50 years for performances.
More from kanhaiya kumawat (20)
Recently uploaded
一比一原版(uoft毕业证书)加拿大多伦多大学毕业证如何办理
原版一模一样【微信：741003700 】【(uoft毕业证书)加拿大多伦多大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Impartiality as per ISO /IEC 17025:2017 Standard
This document provides basic guidelines for imparitallity requirement of ISO 17025. It defines in detial how it is met and wiudhwdih jdhsjdhwudjwkdbjwkdddddddddddkkkkkkkkkkkkkkkkkkkkkkkwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwioiiiiiiiiiiiii uwwwwwwwwwwwwwwwwhe wiqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq gbbbbbbbbbbbbb owdjjjjjjjjjjjjjjjjjjjj widhi owqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq uwdhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhwqiiiiiiiiiiiiiiiiiiiiiiiiiiiiw0pooooojjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj whhhhhhhhhhh wheeeeeeee wihieiiiiii wihe
e qqqqqqqqqqeuwiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiqw dddddddddd cccccccccccccccv s w c r
cdf cb bicbsad ishd d qwkbdwiur e wetwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww w
dddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddfffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffw
uuuuhhhhhhhhhhhhhhhhhhhhhhhhe qiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii iqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc ccccccccccccccccccccccccccccccccccc bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbu uuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuum
m
m mmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm m i
g i dijsd sjdnsjd ndjajsdnnsa adjdnawddddddddddddd uw
Applications of artificial Intelligence in Mechanical Engineering.pdf
Historically, mechanical engineering has relied heavily on human expertise and empirical methods to solve complex problems. With the introduction of computer-aided design (CAD) and finite element analysis (FEA), the field took its first steps towards digitization. These tools allowed engineers to simulate and analyze mechanical systems with greater accuracy and efficiency. However, the sheer volume of data generated by modern engineering systems and the increasing complexity of these systems have necessitated more advanced analytical tools, paving the way for AI.
AI offers the capability to process vast amounts of data, identify patterns, and make predictions with a level of speed and accuracy unattainable by traditional methods. This has profound implications for mechanical engineering, enabling more efficient design processes, predictive maintenance strategies, and optimized manufacturing operations. AI-driven tools can learn from historical data, adapt to new information, and continuously improve their performance, making them invaluable in tackling the multifaceted challenges of modern mechanical engineering.
Determination of Equivalent Circuit parameters and performance characteristic...
Includes the testing of induction motor to draw the circle diagram of induction motor with step wise procedure and calculation for the same. Also explains the working and application of Induction generator
一比一原版(USF毕业证)旧金山大学毕业证如何办理
原件一模一样【微信：95270640】【旧金山大学毕业证USF学位证成绩单】【微信：95270640】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：95270640】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：95270640】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：95270640】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理旧金山大学毕业证毕业证学位证USF学位证【微信：95270640 】外观非常精致，由特殊纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理旧金山大学毕业证USF学位证毕业证学位证【微信：95270640 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理旧金山大学毕业证毕业证学位证USF学位证【微信：95270640 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理旧金山大学毕业证毕业证学位证USF学位证【微信：95270640 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
Energy efficiency has been important since the latter part of the last century. The main object of this survey is to determine the energy efficiency knowledge among consumers. Two separate districts in Bangladesh are selected to conduct the survey on households and showrooms about the energy and seller also. The survey uses the data to find some regression equations from which it is easy to predict energy efficiency knowledge. The data is analyzed and calculated based on five important criteria. The initial target was to find some factors that help predict a person's energy efficiency knowledge. From the survey, it is found that the energy efficiency awareness among the people of our country is very low. Relationships between household energy use behaviors are estimated using a unique dataset of about 40 households and 20 showrooms in Bangladesh's Chapainawabganj and Bagerhat districts. Knowledge of energy consumption and energy efficiency technology options is found to be associated with household use of energy conservation practices. Household characteristics also influence household energy use behavior. Younger household cohorts are more likely to adopt energy-efficient technologies and energy conservation practices and place primary importance on energy saving for environmental reasons. Education also influences attitudes toward energy conservation in Bangladesh. Low-education households indicate they primarily save electricity for the environment while high-education households indicate they are motivated by environmental concerns.
一比一原版(爱大毕业证书)爱荷华大学毕业证如何办理
原版一模一样【微信：741003700 】【(爱大毕业证书)爱荷华大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Supermarket Management System Project Report.pdf
Supermarket management is a stand-alone J2EE using Eclipse Juno program.
This project contains all the necessary required information about maintaining
the supermarket billing system.
The core idea of this project to minimize the paper work and centralize the
data. Here all the communication is taken in secure manner. That is, in this
application the information will be stored in client itself. For further security the
data base is stored in the back-end oracle and so no intruders can access it.
Blood finder application project report (1).pdf
Blood Finder is an emergency time app where a user can search for the blood banks as
well as the registered blood donors around Mumbai. This application also provide an
opportunity for the user of this application to become a registered donor for this user have
to enroll for the donor request from the application itself. If the admin wish to make user
a registered donor, with some of the formalities with the organization it can be done.
Specialization of this application is that the user will not have to register on sign-in for
searching the blood banks and blood donors it can be just done by installing the
application to the mobile.
The purpose of making this application is to save the user’s time for searching blood of
needed blood group during the time of the emergency.
This is an android application developed in Java and XML with the connectivity of
SQLite database. This application will provide most of basic functionality required for an
emergency time application. All the details of Blood banks and Blood donors are stored
in the database i.e. SQLite.
This application allowed the user to get all the information regarding blood banks and
blood donors such as Name, Number, Address, Blood Group, rather than searching it on
the different websites and wasting the precious time. This application is effective and
user friendly.
Open Channel Flow: fluid flow with a free surface
Open Channel Flow: This topic focuses on fluid flow with a free surface, such as in rivers, canals, and drainage ditches. Key concepts include the classification of flow types (steady vs. unsteady, uniform vs. non-uniform), hydraulic radius, flow resistance, Manning's equation, critical flow conditions, and energy and momentum principles. It also covers flow measurement techniques, gradually varied flow analysis, and the design of open channels. Understanding these principles is vital for effective water resource management and engineering applications.
Levelised Cost of Hydrogen (LCOH) Calculator Manual
The aim of this manual is to explain the
methodology behind the Levelized Cost of
Hydrogen (LCOH) calculator. Moreover, this
manual also demonstrates how the calculator
can be used for estimating the expenses associated with hydrogen production in Europe
using low-temperature electrolysis considering different sources of electricity
Presentation on Food Delivery Systems
This presentation is about Food Delivery Systems and how they are developed using the Software Development Life Cycle (SDLC) and other methods. It explains the steps involved in creating a food delivery app, from planning and designing to testing and launching. The slide also covers different tools and technologies used to make these systems work efficiently.
Beckhoff Programmable Logic Control Overview Presentation
This presentation is to describe the overview of PLC Beckhoff for beginners
Ericsson LTE Throughput Troubleshooting Techniques.ppt
Ericsson LTE Throughput Troubleshooting Techniques
Butterfly Valves Manufacturer (LBF Series).pdf
We have designed & manufacture the Lubi Valves LBF series type of Butterfly Valves for General Utility Water applications as well as for HVAC applications.
Recently uploaded (20)
Applications of artificial Intelligence in Mechanical Engineering.pdf
Applications of artificial Intelligence in Mechanical Engineering.pdf
Determination of Equivalent Circuit parameters and performance characteristic...
Determination of Equivalent Circuit parameters and performance characteristic...
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
Levelised Cost of Hydrogen (LCOH) Calculator Manual
Levelised Cost of Hydrogen (LCOH) Calculator Manual
Beckhoff Programmable Logic Control Overview Presentation
Beckhoff Programmable Logic Control Overview Presentation
openshift technical overview - Flow of openshift containerisatoin
openshift technical overview - Flow of openshift containerisatoin
Ericsson LTE Throughput Troubleshooting Techniques.ppt
Ericsson LTE Throughput Troubleshooting Techniques.ppt
Manufacturing of pe fabric by utilizing the household pe waste
- 1. A Presentation on Manufacturing of PE fabric by utilizing the household PE waste INSTITUTE OF CHEMICAL TECHNOLOGY, MUMBAI 1 Presented by: Kanhaya lal Kumawat [19TXT205]
- 2. AGENDA Idea Objectives Mechanism Gantt Chart Conclusions 2
- 3. IDEA Household Waste Bad effect of Household waste on animals Bad effect of Household waste on marine ecosystem PE filament PE Fabric PE Mat 3
- 4. OBJECTIVES 1. Collection of household waste. 2. Segregation and recycling of PE waste. 3. Filament formation by using PE pallets. 4. Low cost PE fabric formation. 4
- 5. Objective Method Mildstone Timeline Collection of household waste. Manual method. To reduce the household waste. 10 days Segregation and recycling of PE waste. Density Separation & Plastic recycling process. To obtain reprocessed PE pallets. 15 days Filament formation by using PE pallets. Melt spinning process. To achieve fabric. 10 days Low cost PE fabric formation. Non-woven process. To reduce the cost of fabric. 15 days 5
- 6. MECHANISM 6 Household Waste Crushed PE material Filament formation Products 1. Recycling of waste by using plastic recycling process. 2. Formation of filament by using melt Spinning process. 3. Fabric manufacturing by using Non woven process. 4. Various products can be manufactured.
- 8. CONCLUSIONS 1. Household waste can be converted into useful products. 2. Cost of products made from PE can be reduced. 3. This will improve the circular economy. 4. Ultimately the outcome will result in improved environment. 8
- 9. 9 THANK YOU