This document describes a system to detect drunk and drowsy driving using computer vision techniques. The system uses a smartphone camera to capture video of the driver's face and body. It analyzes eye blinking using facial landmark detection to detect drowsiness. It also analyzes body and head movements using differential imaging to detect signs of drunkenness. If signs of drowsiness or drunkenness are detected based on severity thresholds, an alarm is sounded to alert the driver. The system aims to help prevent accidents by monitoring driver fitness in real-time using non-intrusive computer vision methods.
Fighting Accident Using Eye Detection forSmartphonesIJERA Editor
This paper is an attempt to investigate an important problem and approaches of human eye detection, blinking, and tracking. A new system was proposed and implemented using android technology for smartphones. System creatively reduces accidents due to drivers’ fatigue by focusing on treating the driver after fatigue has been detected to achieve decrease in accident likelihood.
Smartphone's have been the important tools in our society for the abundant functions including communication, entertainment and online office etc. as the pivotal devices of mobile computing. Smartphone development has also become more important than before. Android is one of the emerging leading operating systems for smartphones as an open source system platform. Many smartphones have adopted this platform and more smartphones will do so in the future. The proposed system is well-suited for real world driving conditions since it can be non-intrusive by using video cameras to detect changes. Driver operation and vehicle behavior can be implemented by equipping automobiles with the ability to monitoring the response of the driver. This involves periodically requesting the driver to send a response to the system to indicate alertness. The propose system based on eyes closer count & yawning count of the driver. By monitoring the eyes and face, it is believed that the symptoms of driver fatigue can be detected early enough to avoid a car accident and providing the driver with a warning if the driver takes his or her eye off the road.
Driving without license is the major cause for the road accident and the equivalent monetary losses. This paper is based on virtual reality based driving system which would enhance road safety and vehicle security. This paper helps to limit the vehicle operation on the basics of two parameters-Learn the driving by our own, category (car or bike) of the vehicle for which the driving license is issued. The hardware and software system required to improve our safety and security is developed. This driving system is apt for getting the license without bribe by gathering eye-gaze, Electroencephalography and peripheral physiological data.
Abstract: The aim of this project is to design an Accident Prevention System whichhelps in preventing/avoiding accidents. Accident due to cause of drowsy is preventedand controlled when the vehicle is out of control. The accidents due to thedrowsy state of the driver is prevented using automatic breaking system by using eye blink sensor. The term used here for the realization that the driveris drowsy is by using eye blink sensor of the driver. In recent times drowsiness is oneof the major problem of highway accidents. These types of accidents occurredcaused by drowsy and driver cant able to control the vehicle, when the driver wakes. The drowsiness is indented by the eye blink closure and blinking frequency through infrared sensor worn by driver by means of spectacles frame or IRS. If thedriver is drowsy, then the system will give buzzer and the speed of thevehicle is reduced in 3 to 5 sec.
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
Yawning analysis for driver drowsiness detectioneSAT Journals
Abstract Driver fatigue is the main reason for fatal road accidents around the world. In this paper, an efficient driver’s drowsiness detection system is designed using yawning detection.Here, we consider eye detection and mouth detection. So that road accidents can avoid successfully. Mouth features points are identified using the redness property. Firstly detecting the driver’s face using YCbCr method then face tracking will perform using canny edge detector. After that , eyes and mouth positions by using Haar features. Lastly yawning detection is perform by using mouth geometric features. This method is tested on images from videos. Also proposed system should then alert to the driver in case of inattention. Keywords: Face detection, Face tracking, Eye and Mouth detection, Yawn detection
Fighting Accident Using Eye Detection forSmartphonesIJERA Editor
This paper is an attempt to investigate an important problem and approaches of human eye detection, blinking, and tracking. A new system was proposed and implemented using android technology for smartphones. System creatively reduces accidents due to drivers’ fatigue by focusing on treating the driver after fatigue has been detected to achieve decrease in accident likelihood.
Smartphone's have been the important tools in our society for the abundant functions including communication, entertainment and online office etc. as the pivotal devices of mobile computing. Smartphone development has also become more important than before. Android is one of the emerging leading operating systems for smartphones as an open source system platform. Many smartphones have adopted this platform and more smartphones will do so in the future. The proposed system is well-suited for real world driving conditions since it can be non-intrusive by using video cameras to detect changes. Driver operation and vehicle behavior can be implemented by equipping automobiles with the ability to monitoring the response of the driver. This involves periodically requesting the driver to send a response to the system to indicate alertness. The propose system based on eyes closer count & yawning count of the driver. By monitoring the eyes and face, it is believed that the symptoms of driver fatigue can be detected early enough to avoid a car accident and providing the driver with a warning if the driver takes his or her eye off the road.
Driving without license is the major cause for the road accident and the equivalent monetary losses. This paper is based on virtual reality based driving system which would enhance road safety and vehicle security. This paper helps to limit the vehicle operation on the basics of two parameters-Learn the driving by our own, category (car or bike) of the vehicle for which the driving license is issued. The hardware and software system required to improve our safety and security is developed. This driving system is apt for getting the license without bribe by gathering eye-gaze, Electroencephalography and peripheral physiological data.
Abstract: The aim of this project is to design an Accident Prevention System whichhelps in preventing/avoiding accidents. Accident due to cause of drowsy is preventedand controlled when the vehicle is out of control. The accidents due to thedrowsy state of the driver is prevented using automatic breaking system by using eye blink sensor. The term used here for the realization that the driveris drowsy is by using eye blink sensor of the driver. In recent times drowsiness is oneof the major problem of highway accidents. These types of accidents occurredcaused by drowsy and driver cant able to control the vehicle, when the driver wakes. The drowsiness is indented by the eye blink closure and blinking frequency through infrared sensor worn by driver by means of spectacles frame or IRS. If thedriver is drowsy, then the system will give buzzer and the speed of thevehicle is reduced in 3 to 5 sec.
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
Yawning analysis for driver drowsiness detectioneSAT Journals
Abstract Driver fatigue is the main reason for fatal road accidents around the world. In this paper, an efficient driver’s drowsiness detection system is designed using yawning detection.Here, we consider eye detection and mouth detection. So that road accidents can avoid successfully. Mouth features points are identified using the redness property. Firstly detecting the driver’s face using YCbCr method then face tracking will perform using canny edge detector. After that , eyes and mouth positions by using Haar features. Lastly yawning detection is perform by using mouth geometric features. This method is tested on images from videos. Also proposed system should then alert to the driver in case of inattention. Keywords: Face detection, Face tracking, Eye and Mouth detection, Yawn detection
Now a days, drowsy driving is becoming biggest challenges leading to the traffic collision. Based on the existing data and statistics, several road accidents and causalities happen due to the drowsy driving which leads to severe injuries. To overcome these challenges, various studies have been done in designing systems that can predict the driver fatigue and alert him beforehand, thus avoiding him to fall asleep behind the wheel and cause an accident. Few existing approaches used psychological measures to give higher accuracy in checking the drowsiness of the driver.
TECHNICAL TRAINING MANUAL GENERAL FAMILIARIZATION COURSEDuvanRamosGarzon1
AIRCRAFT GENERAL
The Single Aisle is the most advanced family aircraft in service today, with fly-by-wire flight controls.
The A318, A319, A320 and A321 are twin-engine subsonic medium range aircraft.
The family offers a choice of engines
Event Management System Vb Net Project Report.pdfKamal Acharya
In present era, the scopes of information technology growing with a very fast .We do not see any are untouched from this industry. The scope of information technology has become wider includes: Business and industry. Household Business, Communication, Education, Entertainment, Science, Medicine, Engineering, Distance Learning, Weather Forecasting. Carrier Searching and so on.
My project named “Event Management System” is software that store and maintained all events coordinated in college. It also helpful to print related reports. My project will help to record the events coordinated by faculties with their Name, Event subject, date & details in an efficient & effective ways.
In my system we have to make a system by which a user can record all events coordinated by a particular faculty. In our proposed system some more featured are added which differs it from the existing system such as security.
COLLEGE BUS MANAGEMENT SYSTEM PROJECT REPORT.pdfKamal Acharya
The College Bus Management system is completely developed by Visual Basic .NET Version. The application is connect with most secured database language MS SQL Server. The application is develop by using best combination of front-end and back-end languages. The application is totally design like flat user interface. This flat user interface is more attractive user interface in 2017. The application is gives more important to the system functionality. The application is to manage the student’s details, driver’s details, bus details, bus route details, bus fees details and more. The application has only one unit for admin. The admin can manage the entire application. The admin can login into the application by using username and password of the admin. The application is develop for big and small colleges. It is more user friendly for non-computer person. Even they can easily learn how to manage the application within hours. The application is more secure by the admin. The system will give an effective output for the VB.Net and SQL Server given as input to the system. The compiled java program given as input to the system, after scanning the program will generate different reports. The application generates the report for users. The admin can view and download the report of the data. The application deliver the excel format reports. Because, excel formatted reports is very easy to understand the income and expense of the college bus. This application is mainly develop for windows operating system users. In 2017, 73% of people enterprises are using windows operating system. So the application will easily install for all the windows operating system users. The application-developed size is very low. The application consumes very low space in disk. Therefore, the user can allocate very minimum local disk space for this application.
Quality defects in TMT Bars, Possible causes and Potential Solutions.PrashantGoswami42
Maintaining high-quality standards in the production of TMT bars is crucial for ensuring structural integrity in construction. Addressing common defects through careful monitoring, standardized processes, and advanced technology can significantly improve the quality of TMT bars. Continuous training and adherence to quality control measures will also play a pivotal role in minimizing these defects.
Hybrid optimization of pumped hydro system and solar- Engr. Abdul-Azeez.pdffxintegritypublishin
Advancements in technology unveil a myriad of electrical and electronic breakthroughs geared towards efficiently harnessing limited resources to meet human energy demands. The optimization of hybrid solar PV panels and pumped hydro energy supply systems plays a pivotal role in utilizing natural resources effectively. This initiative not only benefits humanity but also fosters environmental sustainability. The study investigated the design optimization of these hybrid systems, focusing on understanding solar radiation patterns, identifying geographical influences on solar radiation, formulating a mathematical model for system optimization, and determining the optimal configuration of PV panels and pumped hydro storage. Through a comparative analysis approach and eight weeks of data collection, the study addressed key research questions related to solar radiation patterns and optimal system design. The findings highlighted regions with heightened solar radiation levels, showcasing substantial potential for power generation and emphasizing the system's efficiency. Optimizing system design significantly boosted power generation, promoted renewable energy utilization, and enhanced energy storage capacity. The study underscored the benefits of optimizing hybrid solar PV panels and pumped hydro energy supply systems for sustainable energy usage. Optimizing the design of solar PV panels and pumped hydro energy supply systems as examined across diverse climatic conditions in a developing country, not only enhances power generation but also improves the integration of renewable energy sources and boosts energy storage capacities, particularly beneficial for less economically prosperous regions. Additionally, the study provides valuable insights for advancing energy research in economically viable areas. Recommendations included conducting site-specific assessments, utilizing advanced modeling tools, implementing regular maintenance protocols, and enhancing communication among system components.
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...Dr.Costas Sachpazis
Terzaghi's soil bearing capacity theory, developed by Karl Terzaghi, is a fundamental principle in geotechnical engineering used to determine the bearing capacity of shallow foundations. This theory provides a method to calculate the ultimate bearing capacity of soil, which is the maximum load per unit area that the soil can support without undergoing shear failure. The Calculation HTML Code included.
Cosmetic shop management system project report.pdfKamal Acharya
Buying new cosmetic products is difficult. It can even be scary for those who have sensitive skin and are prone to skin trouble. The information needed to alleviate this problem is on the back of each product, but it's thought to interpret those ingredient lists unless you have a background in chemistry.
Instead of buying and hoping for the best, we can use data science to help us predict which products may be good fits for us. It includes various function programs to do the above mentioned tasks.
Data file handling has been effectively used in the program.
The automated cosmetic shop management system should deal with the automation of general workflow and administration process of the shop. The main processes of the system focus on customer's request where the system is able to search the most appropriate products and deliver it to the customers. It should help the employees to quickly identify the list of cosmetic product that have reached the minimum quantity and also keep a track of expired date for each cosmetic product. It should help the employees to find the rack number in which the product is placed.It is also Faster and more efficient way.
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.