This document analyzes the seismic performance of flat plate and flat slab structures with varying stiffness. Four models are considered: flat plate with shear walls, flat plate with bracing, flat slab with shear walls, and flat slab with bracing. The structures are analyzed using ETABS software to determine parameters like story displacement, drift, and base shear. The results show that under equivalent static analysis and response spectrum analysis, the flat slab with shear walls performs better than the other models, with minimum displacement and drift. In conclusion, the flat slab with shear walls provides better seismic performance for high seismic zones compared to the other structural configurations analyzed.
Static Analysis of G+2 Institutional Building in BhopalIJERA Editor
A Seismic design is aimed at controlling the structural damage based on precise estimations of proper response
parameters. Seismic design explicitly evaluates how a building is likely to perform; given the potential hazard it
is likely to experience, considering uncertainties inherent in the quantification of potential hazard and
uncertainties in assessment of the actual building response. It is an interactive process that begins with the
selection of performance objectives, followed by the development of a preliminary design, an assessment as to
whether or not the design meets the performance objectives, and finally redesign and reassessment, if required,
until the desired performance level is achieved.
In this present study one R.C. buildings, of G + 2 storey institutional building (designed according to IS
456:2000) are analysed. Analysis and redesigning by changing the main reinforcement of various frame
elements and again analyzing. The structural analysis has been carried out using STAAD.Pro V8i, a product of
Structural Analysis and Design Program. A total of 1 cases for a particular G + 2 storey institutional building
located in Zone-II have been analyzed. The results of analysis are compared in terms of reinforcement in the
column and beam. The best possible combination of reinforcement that is economical, effective and whose
damage is limited to Grade 2 (slight structural damage, moderate non structural damage) in order to enable
Immediate Occupancy is determined and is termed as Seismic Design.
Design & Analysis of High rise Building With & Without Floating Column Using ...IJSRD
At present buildings with floating column is a typical feature in the modern multistory construction in urban India. There are many projects in which floating columns are adopted, especially above the ground floor, where transfer girders are employed, so that more open space is available in the ground floor. As the load path in the floating columns is not continuous, they are more vulnerable to the seismic activity. Sometimes, to meet the requirements these type of aspects cannot be avoided though these are not found to be of safe. Hence, an attempt is taken to study the behavior of a G+15 multi storey building in which some storey’s are considered for commercial purpose and remaining storey’s are for residential purpose. This paper studies the comparison & seismic analysis of the multistory buildings with floating column and without floating column. Finally, analysis & results in the high rise building such as storey drifts, storey displacement, and Base shear were shown in this study. Design and Analysis was carried out by using Extended Three Dimensional Analysis of Building Systems (ETABS) Software.
Performance of Flat Slab Structure Using Pushover AnalysisIOSR Journals
Performance Based Seismic Engineering is the modern approach to earthquake resistant design. It
is a limit-state based design approach extended to cover complex range of issues faced by structural engineers.
Flat slabs are becoming popular and gaining importance as they are economical as compared to beam-column
connections in conventional slab. Many existing flat slabs may not have been designed for seismic forces so it is
important to study their response under seismic conditions and to evaluate seismic retrofit schemes. In this
paper we have discussed the results obtained by performing push over analysis on flat slabs by using most
common software SAP2000. A (G+7) frame having 5 bays is considered for analysis. It is observed that the
performance point of flat slab is more as compared to conventional building.
The main aim of this paper is to identify the type of bracing for the better seismic
performance of the structure by building steel bracings at different floor
levels.Duringearthquakes the human loss is mainly due to the failure of structures.
Seismic deficitstructures will crumble even at low magnitude earthquakes.Many
existing structures need to be retrofitted,installation of steel bracing for existing
structure will be easiest way instead of buildingshear walls.Steel tubular X-bracing
system have been installed to the strcuture at different floor levels for choosen G+5
RCC building and analyzed by Non-linear static push over analysis.Six cases are
considered in this study, in each case the placement of bracing were changed to find
out the better performane of the structue with variation in the placement of bracings at
different storey levels.The comparisions made between these six cases by keeping base
model as ideal model along with the parameters like base shear,displacement and
inter-storey drift.After comparing it was found that there is a significant increase of
Base Shear by 14.90%,16.53% for case-3,case-5 models respectively when compared
with basemodel i.e. case-1with out bracing. The displacement is reduced by 17.39%,
17.39% for case-3 and case-5models respectively when compared with base model.
There is a reduction of inter-storey drift by 33.33%, 33.33% for case-3 and case-5
models respectively when compared with base model. Case-3 and case-5 braced
frames has been significantly performed well with the reduction in storey drifts and
displacements and increase in base shear
Static Analysis of G+2 Institutional Building in BhopalIJERA Editor
A Seismic design is aimed at controlling the structural damage based on precise estimations of proper response
parameters. Seismic design explicitly evaluates how a building is likely to perform; given the potential hazard it
is likely to experience, considering uncertainties inherent in the quantification of potential hazard and
uncertainties in assessment of the actual building response. It is an interactive process that begins with the
selection of performance objectives, followed by the development of a preliminary design, an assessment as to
whether or not the design meets the performance objectives, and finally redesign and reassessment, if required,
until the desired performance level is achieved.
In this present study one R.C. buildings, of G + 2 storey institutional building (designed according to IS
456:2000) are analysed. Analysis and redesigning by changing the main reinforcement of various frame
elements and again analyzing. The structural analysis has been carried out using STAAD.Pro V8i, a product of
Structural Analysis and Design Program. A total of 1 cases for a particular G + 2 storey institutional building
located in Zone-II have been analyzed. The results of analysis are compared in terms of reinforcement in the
column and beam. The best possible combination of reinforcement that is economical, effective and whose
damage is limited to Grade 2 (slight structural damage, moderate non structural damage) in order to enable
Immediate Occupancy is determined and is termed as Seismic Design.
Design & Analysis of High rise Building With & Without Floating Column Using ...IJSRD
At present buildings with floating column is a typical feature in the modern multistory construction in urban India. There are many projects in which floating columns are adopted, especially above the ground floor, where transfer girders are employed, so that more open space is available in the ground floor. As the load path in the floating columns is not continuous, they are more vulnerable to the seismic activity. Sometimes, to meet the requirements these type of aspects cannot be avoided though these are not found to be of safe. Hence, an attempt is taken to study the behavior of a G+15 multi storey building in which some storey’s are considered for commercial purpose and remaining storey’s are for residential purpose. This paper studies the comparison & seismic analysis of the multistory buildings with floating column and without floating column. Finally, analysis & results in the high rise building such as storey drifts, storey displacement, and Base shear were shown in this study. Design and Analysis was carried out by using Extended Three Dimensional Analysis of Building Systems (ETABS) Software.
Performance of Flat Slab Structure Using Pushover AnalysisIOSR Journals
Performance Based Seismic Engineering is the modern approach to earthquake resistant design. It
is a limit-state based design approach extended to cover complex range of issues faced by structural engineers.
Flat slabs are becoming popular and gaining importance as they are economical as compared to beam-column
connections in conventional slab. Many existing flat slabs may not have been designed for seismic forces so it is
important to study their response under seismic conditions and to evaluate seismic retrofit schemes. In this
paper we have discussed the results obtained by performing push over analysis on flat slabs by using most
common software SAP2000. A (G+7) frame having 5 bays is considered for analysis. It is observed that the
performance point of flat slab is more as compared to conventional building.
The main aim of this paper is to identify the type of bracing for the better seismic
performance of the structure by building steel bracings at different floor
levels.Duringearthquakes the human loss is mainly due to the failure of structures.
Seismic deficitstructures will crumble even at low magnitude earthquakes.Many
existing structures need to be retrofitted,installation of steel bracing for existing
structure will be easiest way instead of buildingshear walls.Steel tubular X-bracing
system have been installed to the strcuture at different floor levels for choosen G+5
RCC building and analyzed by Non-linear static push over analysis.Six cases are
considered in this study, in each case the placement of bracing were changed to find
out the better performane of the structue with variation in the placement of bracings at
different storey levels.The comparisions made between these six cases by keeping base
model as ideal model along with the parameters like base shear,displacement and
inter-storey drift.After comparing it was found that there is a significant increase of
Base Shear by 14.90%,16.53% for case-3,case-5 models respectively when compared
with basemodel i.e. case-1with out bracing. The displacement is reduced by 17.39%,
17.39% for case-3 and case-5models respectively when compared with base model.
There is a reduction of inter-storey drift by 33.33%, 33.33% for case-3 and case-5
models respectively when compared with base model. Case-3 and case-5 braced
frames has been significantly performed well with the reduction in storey drifts and
displacements and increase in base shear
Explore the innovative world of trenchless pipe repair with our comprehensive guide, "The Benefits and Techniques of Trenchless Pipe Repair." This document delves into the modern methods of repairing underground pipes without the need for extensive excavation, highlighting the numerous advantages and the latest techniques used in the industry.
Learn about the cost savings, reduced environmental impact, and minimal disruption associated with trenchless technology. Discover detailed explanations of popular techniques such as pipe bursting, cured-in-place pipe (CIPP) lining, and directional drilling. Understand how these methods can be applied to various types of infrastructure, from residential plumbing to large-scale municipal systems.
Ideal for homeowners, contractors, engineers, and anyone interested in modern plumbing solutions, this guide provides valuable insights into why trenchless pipe repair is becoming the preferred choice for pipe rehabilitation. Stay informed about the latest advancements and best practices in the field.
Quality defects in TMT Bars, Possible causes and Potential Solutions.PrashantGoswami42
Maintaining high-quality standards in the production of TMT bars is crucial for ensuring structural integrity in construction. Addressing common defects through careful monitoring, standardized processes, and advanced technology can significantly improve the quality of TMT bars. Continuous training and adherence to quality control measures will also play a pivotal role in minimizing these defects.
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.
Cosmetic shop management system project report.pdfKamal Acharya
Buying new cosmetic products is difficult. It can even be scary for those who have sensitive skin and are prone to skin trouble. The information needed to alleviate this problem is on the back of each product, but it's thought to interpret those ingredient lists unless you have a background in chemistry.
Instead of buying and hoping for the best, we can use data science to help us predict which products may be good fits for us. It includes various function programs to do the above mentioned tasks.
Data file handling has been effectively used in the program.
The automated cosmetic shop management system should deal with the automation of general workflow and administration process of the shop. The main processes of the system focus on customer's request where the system is able to search the most appropriate products and deliver it to the customers. It should help the employees to quickly identify the list of cosmetic product that have reached the minimum quantity and also keep a track of expired date for each cosmetic product. It should help the employees to find the rack number in which the product is placed.It is also Faster and more efficient way.
Vaccine management system project report documentation..pdfKamal Acharya
The Division of Vaccine and Immunization is facing increasing difficulty monitoring vaccines and other commodities distribution once they have been distributed from the national stores. With the introduction of new vaccines, more challenges have been anticipated with this additions posing serious threat to the already over strained vaccine supply chain system in Kenya.
Final project report on grocery store management system..pdfKamal Acharya
In today’s fast-changing business environment, it’s extremely important to be able to respond to client needs in the most effective and timely manner. If your customers wish to see your business online and have instant access to your products or services.
Online Grocery Store is an e-commerce website, which retails various grocery products. This project allows viewing various products available enables registered users to purchase desired products instantly using Paytm, UPI payment processor (Instant Pay) and also can place order by using Cash on Delivery (Pay Later) option. This project provides an easy access to Administrators and Managers to view orders placed using Pay Later and Instant Pay options.
In order to develop an e-commerce website, a number of Technologies must be studied and understood. These include multi-tiered architecture, server and client-side scripting techniques, implementation technologies, programming language (such as PHP, HTML, CSS, JavaScript) and MySQL relational databases. This is a project with the objective to develop a basic website where a consumer is provided with a shopping cart website and also to know about the technologies used to develop such a website.
This document will discuss each of the underlying technologies to create and implement an e- commerce website.
Hybrid optimization of pumped hydro system and solar- Engr. Abdul-Azeez.pdffxintegritypublishin
Advancements in technology unveil a myriad of electrical and electronic breakthroughs geared towards efficiently harnessing limited resources to meet human energy demands. The optimization of hybrid solar PV panels and pumped hydro energy supply systems plays a pivotal role in utilizing natural resources effectively. This initiative not only benefits humanity but also fosters environmental sustainability. The study investigated the design optimization of these hybrid systems, focusing on understanding solar radiation patterns, identifying geographical influences on solar radiation, formulating a mathematical model for system optimization, and determining the optimal configuration of PV panels and pumped hydro storage. Through a comparative analysis approach and eight weeks of data collection, the study addressed key research questions related to solar radiation patterns and optimal system design. The findings highlighted regions with heightened solar radiation levels, showcasing substantial potential for power generation and emphasizing the system's efficiency. Optimizing system design significantly boosted power generation, promoted renewable energy utilization, and enhanced energy storage capacity. The study underscored the benefits of optimizing hybrid solar PV panels and pumped hydro energy supply systems for sustainable energy usage. Optimizing the design of solar PV panels and pumped hydro energy supply systems as examined across diverse climatic conditions in a developing country, not only enhances power generation but also improves the integration of renewable energy sources and boosts energy storage capacities, particularly beneficial for less economically prosperous regions. Additionally, the study provides valuable insights for advancing energy research in economically viable areas. Recommendations included conducting site-specific assessments, utilizing advanced modeling tools, implementing regular maintenance protocols, and enhancing communication among system components.
Forklift Classes Overview by Intella PartsIntella Parts
Discover the different forklift classes and their specific applications. Learn how to choose the right forklift for your needs to ensure safety, efficiency, and compliance in your operations.
For more technical information, visit our website https://intellaparts.com
Water scarcity is the lack of fresh water resources to meet the standard water demand. There are two type of water scarcity. One is physical. The other is economic water scarcity.
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)MdTanvirMahtab2
This presentation is about the working procedure of Shahjalal Fertilizer Company Limited (SFCL). A Govt. owned Company of Bangladesh Chemical Industries Corporation under Ministry of Industries.
CFD Simulation of By-pass Flow in a HRSG module by R&R Consult.pptxR&R Consult
CFD analysis is incredibly effective at solving mysteries and improving the performance of complex systems!
Here's a great example: At a large natural gas-fired power plant, where they use waste heat to generate steam and energy, they were puzzled that their boiler wasn't producing as much steam as expected.
R&R and Tetra Engineering Group Inc. were asked to solve the issue with reduced steam production.
An inspection had shown that a significant amount of hot flue gas was bypassing the boiler tubes, where the heat was supposed to be transferred.
R&R Consult conducted a CFD analysis, which revealed that 6.3% of the flue gas was bypassing the boiler tubes without transferring heat. The analysis also showed that the flue gas was instead being directed along the sides of the boiler and between the modules that were supposed to capture the heat. This was the cause of the reduced performance.
Based on our results, Tetra Engineering installed covering plates to reduce the bypass flow. This improved the boiler's performance and increased electricity production.
It is always satisfying when we can help solve complex challenges like this. Do your systems also need a check-up or optimization? Give us a call!
Work done in cooperation with James Malloy and David Moelling from Tetra Engineering.
More examples of our work https://www.r-r-consult.dk/en/cases-en/
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...Amil Baba Dawood bangali
Contact with Dawood Bhai Just call on +92322-6382012 and we'll help you. We'll solve all your problems within 12 to 24 hours and with 101% guarantee and with astrology systematic. If you want to take any personal or professional advice then also you can call us on +92322-6382012 , ONLINE LOVE PROBLEM & Other all types of Daily Life Problem's.Then CALL or WHATSAPP us on +92322-6382012 and Get all these problems solutions here by Amil Baba DAWOOD BANGALI
#vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore#blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #blackmagicforlove #blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #Amilbabainuk #amilbabainspain #amilbabaindubai #Amilbabainnorway #amilbabainkrachi #amilbabainlahore #amilbabaingujranwalan #amilbabainislamabad
COLLEGE BUS MANAGEMENT SYSTEM PROJECT REPORT.pdfKamal Acharya
The College Bus Management system is completely developed by Visual Basic .NET Version. The application is connect with most secured database language MS SQL Server. The application is develop by using best combination of front-end and back-end languages. The application is totally design like flat user interface. This flat user interface is more attractive user interface in 2017. The application is gives more important to the system functionality. The application is to manage the student’s details, driver’s details, bus details, bus route details, bus fees details and more. The application has only one unit for admin. The admin can manage the entire application. The admin can login into the application by using username and password of the admin. The application is develop for big and small colleges. It is more user friendly for non-computer person. Even they can easily learn how to manage the application within hours. The application is more secure by the admin. The system will give an effective output for the VB.Net and SQL Server given as input to the system. The compiled java program given as input to the system, after scanning the program will generate different reports. The application generates the report for users. The admin can view and download the report of the data. The application deliver the excel format reports. Because, excel formatted reports is very easy to understand the income and expense of the college bus. This application is mainly develop for windows operating system users. In 2017, 73% of people enterprises are using windows operating system. So the application will easily install for all the windows operating system users. The application-developed size is very low. The application consumes very low space in disk. Therefore, the user can allocate very minimum local disk space for this application.