Research Inventy : International Journal of Engineering and Scienceresearchinventy
Research Inventy : International Journal of Engineering and Science is published by the group of young academic and industrial researchers with 12 Issues per year. It is an online as well as print version open access journal that provides rapid publication (monthly) of articles in all areas of the subject such as: civil, mechanical, chemical, electronic and computer engineering as well as production and information technology. The Journal welcomes the submission of manuscripts that meet the general criteria of significance and scientific excellence. Papers will be published by rapid process within 20 days after acceptance and peer review process takes only 7 days. All articles published in Research Inventy will be peer-reviewed.
STATE OF THE ART: DYNAMIC VOLTAGE RESTORER FOR POWER QUALITY IMPROVEMENTecij
Improved and controlled power quality is one of the essential and fundamental need in any power driven industry for optimum utilization of resources. However critical problems in power quality have been recognized such as sags, swells, harmonic distortions and other interruptions. Out of these sags and swells
are predominantly found and have severe impact on the electrical devices or electrical machines and therefore needs to be compensated at an earliest to ensure any mal-operation or failure. To crack these problems custom power devices are used like unified power-quality conditioner (UPQC), distributionSTATCOM (DSTATCOM) and dynamic voltage restorer (DVR). The DVR is a one of the custom power device used for the compensation of voltage sag and swell with an advantage of active/reactive power control. A major volume of literature reported in past several years on different configurations of DVR and different control technique used in it. In context of this a detailed review on DVR has been presented with different possible power circuit topologies and control techniques available to reconcile these power quality issues. This review article will contribute in better selection of control strategy and power circuit for optimum performance of DVR for a particular requirement. Also it presents a very helpful investigation for the researcher in this field.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Research Inventy : International Journal of Engineering and Scienceresearchinventy
Research Inventy : International Journal of Engineering and Science is published by the group of young academic and industrial researchers with 12 Issues per year. It is an online as well as print version open access journal that provides rapid publication (monthly) of articles in all areas of the subject such as: civil, mechanical, chemical, electronic and computer engineering as well as production and information technology. The Journal welcomes the submission of manuscripts that meet the general criteria of significance and scientific excellence. Papers will be published by rapid process within 20 days after acceptance and peer review process takes only 7 days. All articles published in Research Inventy will be peer-reviewed.
STATE OF THE ART: DYNAMIC VOLTAGE RESTORER FOR POWER QUALITY IMPROVEMENTecij
Improved and controlled power quality is one of the essential and fundamental need in any power driven industry for optimum utilization of resources. However critical problems in power quality have been recognized such as sags, swells, harmonic distortions and other interruptions. Out of these sags and swells
are predominantly found and have severe impact on the electrical devices or electrical machines and therefore needs to be compensated at an earliest to ensure any mal-operation or failure. To crack these problems custom power devices are used like unified power-quality conditioner (UPQC), distributionSTATCOM (DSTATCOM) and dynamic voltage restorer (DVR). The DVR is a one of the custom power device used for the compensation of voltage sag and swell with an advantage of active/reactive power control. A major volume of literature reported in past several years on different configurations of DVR and different control technique used in it. In context of this a detailed review on DVR has been presented with different possible power circuit topologies and control techniques available to reconcile these power quality issues. This review article will contribute in better selection of control strategy and power circuit for optimum performance of DVR for a particular requirement. Also it presents a very helpful investigation for the researcher in this field.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Mitigation of Voltage Sag/Swell using Custom Power Devices with SMES System i...Editor IJMTER
Any power problem noticed in voltage, current or frequency deviations that results in
misoperation of customer or end user equipment. The new method of dynamic voltage restorer with
SMES is proposed to protect consumers load from tripping .The DVR can effectively inject the
voltage to the power lines. To improve the performance of DVR the superconducting magnet is
selected as the energy storage unit. The compensation of the voltage sag, swell by short period of
voltage injection. SMES based DVR has been used to improve the performance of power system. It
is having high power rating with maximum efficiency than any other energy storage devices. It
restores line voltage to its nominal value within few milliseconds. Most of the power quality
problems are voltage sag, swell, interruption, transient, fluctuation, etc.. Among those power quality
problem voltage sag is severe one. So it is analyzing and mitigated using custom power device and
SMES system using MATLAB SIMULINK in proposed system.
Modeling Analysis& Solution of Power Quality Problems Using DVR & DSTATCOMijsrd.com
A Power quality problem is an occurrence manifested as a nonstandard voltage, current or frequency that results in a failure or a disoperation of end use equipment. Utility distribution networks, sensitive industrial loads, and critical commercial operations all suffer from various types of outages and service interruptions which can cost significant financial loss per incident based on process down-time, lost production, idle work forces, and other factors. With the restructuring of Power Systems and with shifting trend towards Distributed and Dispersed Generation, the issue of Power Quality is going to take newer dimensions. The aim therefore, in this work, is to identify the prominent concerns in the area and thereby to recommend measures that can enhance the quality of the power, keeping in mind their economic viability and technical repercussions. In this paper electromagnetic transient studies are presented for the following two custom power controllers: the distribution static compensator (DSTATCOM), and the dynamic voltage restorer (DVR). Comprehensive results are presented to assess the performance of each device as a potential custom power solution.
Come join the area's leading power quality experts as we demonstrate and replicate common power quality issues, problems and solutions in today's industrial and commercial electrical environments.
An enhanced voltage sag compensation scheme for dynamic voltage restorerLeMeniz Infotech
An enhanced voltage sag compensation scheme for dynamic voltage restorer
To Get this projects Call : 9566355386 / 99625 88976
Visit : www.lemenizinfotech.com / www.ieeemaster.com
Mail : projects@lemenizinfotech.com
Analysis of Total Harmonic Distortion (THD) Level of Distribution Network Usi...IJERA Editor
The modern sensitive, Non-linear and sophisticated load affects the power quality. Dynamic Voltage Restorer (DVR) provides the fast, flexible and efficient solution to improve the power quality for such distribution network [8]. The active power, reactive power, variation of voltage, flicker, harmonics, and electrical behavior of switching operations are the major source of affecting power quality. The intent of this paper is to demonstrate the improvements obtained with DVR in power system network using MATLAB/SIMULINK. In this paper, an overview of the DVR, its functions, configurations, components, control strategies are reviewed. The Simulation results are presented to illustrate the performance of DVR in Total Harmonic Distortion (THD). The results showed clearly the performance of using DVR in improving THD level.
Introduction
Power Quality Problems
Power Quality Measurement Devices
Power Quality Terminology
Power Quality Standards
Unbundled Power Quality Services
Power Quality Monitoring
Benefits of Power Quality
Conclusion
References
Sag mitigation in distribution system by using Dynamic voltage Restorer (DVR)IJERA Editor
Power quality is most important concern in the current age. It’s now a day’s necessary with the refined devices, where performance is very perceptive to the quality of power supply. Power quality crisis is an incidence manifest as a typical voltage, current or frequency that results in a failure of end use equipments. One of the major crises dealt here is the power sag. Perceptive industrial loads and distribution networks suffer from different types of service interruptions and outages which results in a major financial loss. To improve the power quality, custom power-devices are used. The device considered in this work is Dynamic Voltage Restorer. This paper shows modelling, analysis and simulation of a DVR test systems using MATLAB.
I have considered single line to ground fault for linear load. The role of DVR is to “compensate load voltage” is examined during the different fault conditions like voltage sag, single phase to ground faults.
Power quality enhancement by improving voltage stability using dstatcomeSAT Publishing House
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
Mitigation of Voltage Sag/Swell using Custom Power Devices with SMES System i...Editor IJMTER
Any power problem noticed in voltage, current or frequency deviations that results in
misoperation of customer or end user equipment. The new method of dynamic voltage restorer with
SMES is proposed to protect consumers load from tripping .The DVR can effectively inject the
voltage to the power lines. To improve the performance of DVR the superconducting magnet is
selected as the energy storage unit. The compensation of the voltage sag, swell by short period of
voltage injection. SMES based DVR has been used to improve the performance of power system. It
is having high power rating with maximum efficiency than any other energy storage devices. It
restores line voltage to its nominal value within few milliseconds. Most of the power quality
problems are voltage sag, swell, interruption, transient, fluctuation, etc.. Among those power quality
problem voltage sag is severe one. So it is analyzing and mitigated using custom power device and
SMES system using MATLAB SIMULINK in proposed system.
Modeling Analysis& Solution of Power Quality Problems Using DVR & DSTATCOMijsrd.com
A Power quality problem is an occurrence manifested as a nonstandard voltage, current or frequency that results in a failure or a disoperation of end use equipment. Utility distribution networks, sensitive industrial loads, and critical commercial operations all suffer from various types of outages and service interruptions which can cost significant financial loss per incident based on process down-time, lost production, idle work forces, and other factors. With the restructuring of Power Systems and with shifting trend towards Distributed and Dispersed Generation, the issue of Power Quality is going to take newer dimensions. The aim therefore, in this work, is to identify the prominent concerns in the area and thereby to recommend measures that can enhance the quality of the power, keeping in mind their economic viability and technical repercussions. In this paper electromagnetic transient studies are presented for the following two custom power controllers: the distribution static compensator (DSTATCOM), and the dynamic voltage restorer (DVR). Comprehensive results are presented to assess the performance of each device as a potential custom power solution.
Come join the area's leading power quality experts as we demonstrate and replicate common power quality issues, problems and solutions in today's industrial and commercial electrical environments.
An enhanced voltage sag compensation scheme for dynamic voltage restorerLeMeniz Infotech
An enhanced voltage sag compensation scheme for dynamic voltage restorer
To Get this projects Call : 9566355386 / 99625 88976
Visit : www.lemenizinfotech.com / www.ieeemaster.com
Mail : projects@lemenizinfotech.com
Analysis of Total Harmonic Distortion (THD) Level of Distribution Network Usi...IJERA Editor
The modern sensitive, Non-linear and sophisticated load affects the power quality. Dynamic Voltage Restorer (DVR) provides the fast, flexible and efficient solution to improve the power quality for such distribution network [8]. The active power, reactive power, variation of voltage, flicker, harmonics, and electrical behavior of switching operations are the major source of affecting power quality. The intent of this paper is to demonstrate the improvements obtained with DVR in power system network using MATLAB/SIMULINK. In this paper, an overview of the DVR, its functions, configurations, components, control strategies are reviewed. The Simulation results are presented to illustrate the performance of DVR in Total Harmonic Distortion (THD). The results showed clearly the performance of using DVR in improving THD level.
Introduction
Power Quality Problems
Power Quality Measurement Devices
Power Quality Terminology
Power Quality Standards
Unbundled Power Quality Services
Power Quality Monitoring
Benefits of Power Quality
Conclusion
References
Sag mitigation in distribution system by using Dynamic voltage Restorer (DVR)IJERA Editor
Power quality is most important concern in the current age. It’s now a day’s necessary with the refined devices, where performance is very perceptive to the quality of power supply. Power quality crisis is an incidence manifest as a typical voltage, current or frequency that results in a failure of end use equipments. One of the major crises dealt here is the power sag. Perceptive industrial loads and distribution networks suffer from different types of service interruptions and outages which results in a major financial loss. To improve the power quality, custom power-devices are used. The device considered in this work is Dynamic Voltage Restorer. This paper shows modelling, analysis and simulation of a DVR test systems using MATLAB.
I have considered single line to ground fault for linear load. The role of DVR is to “compensate load voltage” is examined during the different fault conditions like voltage sag, single phase to ground faults.
Power quality enhancement by improving voltage stability using dstatcomeSAT Publishing House
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
Enhancement of Power Quality Problem by Using Dynamic Voltage RestorerAM Publications
Dynamic voltage restorers (DVRs) are used to protect sensitive loads from the effects of voltage sags on the
distribution feeder. This paper presents and verifies a novel voltage sag detection technique for use in conjunction
with the main control system of a DVR. In all cases it is necessary for the DVR control system to not only detect the
start and end of a voltage sag but also to determine the sag depth and any associated phase shift. The DVR, which is
placed in series with a sensitive load, must be able to respond quickly to a voltage sag if end users of sensitive
equipment are to experience no voltage sag. The DVR can restore the load voltage within few milliseconds. A control
technique based on a proportional–integral (PI) controller and a selective controller is used. The controller is
designed in a synchronously-rotating reference frame. In fact, three independent controllers have been used to tackle
balanced and unbalanced voltage supplies. Simulation results using ‘MATLAB SIMULINK’ Sim Power System
Toolbox is presented to illustrate the principle and performance of a DVR operation in load voltage compensation.
Voltage sag mitigation using supercapacitor based dynamic voltage restorereSAT Publishing House
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
International Journal of Engineering Research and Applications (IJERA) is a team of researchers not publication services or private publications running the journals for monetary benefits, we are association of scientists and academia who focus only on supporting authors who want to publish their work. The articles published in our journal can be accessed online, all the articles will be archived for real time access.
Our journal system primarily aims to bring out the research talent and the works done by sciaentists, academia, engineers, practitioners, scholars, post graduate students of engineering and science. This journal aims to cover the scientific research in a broader sense and not publishing a niche area of research facilitating researchers from various verticals to publish their papers. It is also aimed to provide a platform for the researchers to publish in a shorter of time, enabling them to continue further All articles published are freely available to scientific researchers in the Government agencies,educators and the general public. We are taking serious efforts to promote our journal across the globe in various ways, we are sure that our journal will act as a scientific platform for all researchers to publish their works online.
International Journal of Engineering Research and Applications (IJERA) is a team of researchers not publication services or private publications running the journals for monetary benefits, we are association of scientists and academia who focus only on supporting authors who want to publish their work. The articles published in our journal can be accessed online, all the articles will be archived for real time access.
Our journal system primarily aims to bring out the research talent and the works done by sciaentists, academia, engineers, practitioners, scholars, post graduate students of engineering and science. This journal aims to cover the scientific research in a broader sense and not publishing a niche area of research facilitating researchers from various verticals to publish their papers. It is also aimed to provide a platform for the researchers to publish in a shorter of time, enabling them to continue further All articles published are freely available to scientific researchers in the Government agencies,educators and the general public. We are taking serious efforts to promote our journal across the globe in various ways, we are sure that our journal will act as a scientific platform for all researchers to publish their works online.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
International Journal of Engineering Research and DevelopmentIJERD Editor
• Electrical, Electronics and Computer Engineering,
• Information Engineering and Technology,
• Mechanical, Industrial and Manufacturing Engineering,
• Automation and Mechatronics Engineering,
• Material and Chemical Engineering,
• Civil and Architecture Engineering,
• Biotechnology and Bio Engineering,
• Environmental Engineering,
• Petroleum and Mining Engineering,
• Marine and Agriculture engineering,
• Aerospace Engineering.
Contemporary Control of DG Integrated DVR for Sag, Swell and Harmonic Mitigat...IJECEIAES
This paper presents a novel control strategy to control DG integrated DVR (dynamic voltage restorer) for mitigation voltage quality problems. Power quality is the most concerning areas in power engineering and voltage quality is of prime focus. Voltage sag, voltage swell and harmonics in voltage causes deterioration in quality of voltage delivered to load. A minor disturbance in voltage profile can degrade the performance of load. Dynamic voltage restorer is a quick responsive custom power device for voltage quality improvement. Photovoltaic (PV) system is considered as DG and output voltage of PV system is boosted with a boost converter to support voltage source converter of DVR. DG integrated DVR with novel control strategy for mitigation of voltage sag, swell and voltage harmonic is presented in this paper. The power system model with DG integrated DVR is developed and results are obtained using MATLAB/SIMULINK. Results are discussed during pre and post sag/swell condition with compensation and THD in voltage is maintained within nominal values.
Modeling and simulation of dynamic voltage restorer for voltage sag mitigatio...IJRRR
Abstract- Power quality deals with utilization of electric energy from the distribution system successfully without interference or interruption. Various factors like interruption in power supply, under voltage, over voltage, unbalanced voltage or current, harmonic distortion, flickering voltage, voltage fluctuation voltage sag etc. result in poor power quality. These power quality related problems can be solved with the help of various custom power devices. Voltage sags are considered to be the most common type of disturbances in the field based on current power disturbances studies. Their impact on sensitive loads is rigorous. The impact ranges from load disruptions to financial losses. In spite of the technical advances in electronics, there are some pieces of equipment that are so sensitive that they are unable to withstand voltage sags. There are many varies methods to mitigate voltage sags, but a Custom Power Supply device is considered to be the most efficient method. This dissertation is the study of Dynamic Voltage Restorer (DVR) which is the most efficient and effective device to protect sensitive equipment against voltage sags. It has low cost, smaller size and it has dynamic response to the disturbance.
Keywords- Voltage sag, DVR, power system, mitigation
Similar to IRJET- Compensation of Voltage Sag and Voltage Swell by using the Power Electronic Device Dynamic Voltage Restorer (DVR) (18)
TECHNICAL TRAINING MANUAL GENERAL FAMILIARIZATION COURSEDuvanRamosGarzon1
AIRCRAFT GENERAL
The Single Aisle is the most advanced family aircraft in service today, with fly-by-wire flight controls.
The A318, A319, A320 and A321 are twin-engine subsonic medium range aircraft.
The family offers a choice of engines
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)MdTanvirMahtab2
This presentation is about the working procedure of Shahjalal Fertilizer Company Limited (SFCL). A Govt. owned Company of Bangladesh Chemical Industries Corporation under Ministry of Industries.
Overview of the fundamental roles in Hydropower generation and the components involved in wider Electrical Engineering.
This paper presents the design and construction of hydroelectric dams from the hydrologist’s survey of the valley before construction, all aspects and involved disciplines, fluid dynamics, structural engineering, generation and mains frequency regulation to the very transmission of power through the network in the United Kingdom.
Author: Robbie Edward Sayers
Collaborators and co editors: Charlie Sims and Connor Healey.
(C) 2024 Robbie E. Sayers
Immunizing Image Classifiers Against Localized Adversary Attacksgerogepatton
This paper addresses the vulnerability of deep learning models, particularly convolutional neural networks
(CNN)s, to adversarial attacks and presents a proactive training technique designed to counter them. We
introduce a novel volumization algorithm, which transforms 2D images into 3D volumetric representations.
When combined with 3D convolution and deep curriculum learning optimization (CLO), itsignificantly improves
the immunity of models against localized universal attacks by up to 40%. We evaluate our proposed approach
using contemporary CNN architectures and the modified Canadian Institute for Advanced Research (CIFAR-10
and CIFAR-100) and ImageNet Large Scale Visual Recognition Challenge (ILSVRC12) datasets, showcasing
accuracy improvements over previous techniques. The results indicate that the combination of the volumetric
input and curriculum learning holds significant promise for mitigating adversarial attacks without necessitating
adversary training.
Explore the innovative world of trenchless pipe repair with our comprehensive guide, "The Benefits and Techniques of Trenchless Pipe Repair." This document delves into the modern methods of repairing underground pipes without the need for extensive excavation, highlighting the numerous advantages and the latest techniques used in the industry.
Learn about the cost savings, reduced environmental impact, and minimal disruption associated with trenchless technology. Discover detailed explanations of popular techniques such as pipe bursting, cured-in-place pipe (CIPP) lining, and directional drilling. Understand how these methods can be applied to various types of infrastructure, from residential plumbing to large-scale municipal systems.
Ideal for homeowners, contractors, engineers, and anyone interested in modern plumbing solutions, this guide provides valuable insights into why trenchless pipe repair is becoming the preferred choice for pipe rehabilitation. Stay informed about the latest advancements and best practices in the field.
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Water scarcity is the lack of fresh water resources to meet the standard water demand. There are two type of water scarcity. One is physical. The other is economic water scarcity.
Cosmetic shop management system project report.pdfKamal Acharya
Buying new cosmetic products is difficult. It can even be scary for those who have sensitive skin and are prone to skin trouble. The information needed to alleviate this problem is on the back of each product, but it's thought to interpret those ingredient lists unless you have a background in chemistry.
Instead of buying and hoping for the best, we can use data science to help us predict which products may be good fits for us. It includes various function programs to do the above mentioned tasks.
Data file handling has been effectively used in the program.
The automated cosmetic shop management system should deal with the automation of general workflow and administration process of the shop. The main processes of the system focus on customer's request where the system is able to search the most appropriate products and deliver it to the customers. It should help the employees to quickly identify the list of cosmetic product that have reached the minimum quantity and also keep a track of expired date for each cosmetic product. It should help the employees to find the rack number in which the product is placed.It is also Faster and more efficient way.