This document discusses research into improving the strength characteristics of fly ash bricks by adding polypropylene fiber. Fly ash, a byproduct of coal combustion, was used to replace some traditional brick materials like clay to reduce environmental impacts. Several mix proportions of fly ash, sand, cement, lime, gypsum and polypropylene fiber were tested. Compression testing found that compressive strength increased with higher fiber content due to improved bonding. Water absorption decreased in fiber mixes due to reduced porosity. The research demonstrates that fly ash bricks with polypropylene fiber can provide structural strength while utilizing an industrial waste and reducing raw material needs.
International Journal of Engineering and Science Invention (IJESI) is an international journal intended for professionals and researchers in all fields of computer science and electronics. IJESI publishes research articles and reviews within the whole field Engineering Science and Technology, new teaching methods, assessment, validation and the impact of new technologies and it will continue to provide information on the latest trends and developments in this ever-expanding subject. The publications of papers are selected through double peer reviewed to ensure originality, relevance, and readability. The articles published in our journal can be accessed online.
International Journal of Engineering and Science Invention (IJESI) is an international journal intended for professionals and researchers in all fields of computer science and electronics. IJESI publishes research articles and reviews within the whole field Engineering Science and Technology, new teaching methods, assessment, validation and the impact of new technologies and it will continue to provide information on the latest trends and developments in this ever-expanding subject. The publications of papers are selected through double peer reviewed to ensure originality, relevance, and readability. The articles published in our journal can be accessed online.
Experimental Study on High Strength Concrete using Industrial Wastesijtsrd
Generally the river sand is used as a fine aggregate on concrete and is obtained by mining the sand from river bed. Increased sand mining not only affects the aquifer of the river bed but also causes environmental problems. In recent days demand for river sand is increasing due to its lesser availability. Therefore the practice of replacing river sand with Metakaolin is taking a tremendous growth. It is inferred from the literature that replacement of Metakaolin upto 40 gives tremendous increase in the strength of the concrete above which the strength starts to decrease. Various literatures show that replacing with green sand 30 to 40 replacement seems to be effective. In both the cases the workability decreases with the increase in its quantity. Also Bottom ash and Metakaolin replacement results in the decrease of workability and it leads to uneconomic in the project. This paper presents the replacement of fine aggregate up to 40 . The river sand is replaced by Green sand, and Marble powder. The replacement levels of Green sand and marble powder varies from 5 , 10 , 15 and 20 . From the mix design, the w c ratio is taken to be 0.40. The specimens are to be casted, cured for the respective mix proportions and various strength characteristics of the concrete at 28 days are to be performed. The suitability of the replacement materials as fine aggregate for concrete has been assessed by comparing its strength. Sriram R | Mr. Prabakaran | Mrs. Uma Nambi ""Experimental Study on High Strength Concrete using Industrial Wastes"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-3 , April 2019, URL: https://www.ijtsrd.com/papers/ijtsrd23155.pdf
Paper URL: https://www.ijtsrd.com/engineering/civil-engineering/23155/experimental-study-on-high-strength-concrete-using-industrial-wastes/sriram-r
Comparatives study of M20 grade conventional concrete pavement with M20 grade...IJSRD
This project work involves an experimental and laboratory study of the Polypropylene fibers with two types of admixtures those are Quarry dust and Fly ash on the mechanical properties of the concrete used in the rigid pavement. In this experimental study involves two types of concrete mixes were prepared individually. Polypropylene fiber of 1% to 3% with Quarry dust of 0.1% to 0.3% and Polypropylene fiber of 1% to 4% with Fly ash of 0.1% to 0.4% by weight of cement were added to the mixes. After that a comparative analysis has been carried out for conventional concrete to that of the fiber reinforced in relation to their compressive, split tensile and flexural properties. By the experimental work the compressive, split tensile and flexural strengths are proportionally increased both Polypropylene + Quarry dust and Polypropylene +Fly ash usage. It is observed that the optimum dosages of Polypropylene + Quarry dust is 3% + 0.3% Polypropylene +Fly ash is 4%+ 0.4% by weight of cement. In this project cost analysis is also determined for conventional concrete and fiber reinforced with admixtures individually using experimental test reports. By analyzing the cost it was found that Polypropylene reinforced concrete with quarry dust pavement is economical than Polypropylene reinforced concrete with Fly ash pavement.
compressive strength of concrete containing milled glass as partial substitut...IJAEMSJORNAL
This work reports the outcome of an experiment carried out by using milled glass (MG) of varying percentages (20%, 40% and 60% by weight)of cement in concrete making. MG was sourced for and milled to required fineness. The concrete was batched with mix ratio of 1։2։ 4. Concrete Cube specimens produced were allowed to cure for 7-28 days and compressive strength, slump and setting time tests were carried out and were compared with those of conventional concrete (0% MG). Results obtained showed that compressive strength of the concrete increased with increase in length of curing age, but decreased as the percentage of MG increased. However, the strength still remained in the allowable range of workability for concrete in line with British standard. MG replacement of 20% was found to be the most suitable mix considering the strength and safe use of the concrete. It was concluded that MG replacement of 20% showed no significant loss in strength compared to the control sample and is stable and could be acceptable in most concrete. At the long run. Waste glass that currently constitutes waste concern in built environment in Nigeria can best be managed through alternative use in concrete production.
Pervious concrete is a concrete composite material consisting of coarse
aggregate, cement and water. Because of the absence of fine aggregate in the mixture,
the aggregates are bonded together at its points of contact by cement paste, resulting
in a high percentage of interconnected voids that, when functioning correctly, permit
the rapid percolation of water through the concrete. In this work, polypropylene
monofilament and fibrillated fibres are selected as raw materials in three varying
percentage. 0.2% of fiber is added by the total volume of concrete and a new method
for determining the permeability of pervious concrete that provides better design
methodology is used. The experimental test values of permeability are discussed and
validated using Avizo software. The mix design is done for the water to binder ratio of
0.30. Coarse aggregate of 10 mm and 4.75 mm are selected in order to reduce the
void content as per the ACI 522R-06 codal provision. The addition of polypropylene
fibers shows enhancement in mechanical properties of the pervious concrete as
expected
Development of unfired bricks using industrial waste Sandeep Jain
A research project aimed at production of an unfired, non-structural, binder brick with 100% waste material, using fly ash, pond ash, coal cinder, & paper sludge along with lime and gypsum system to alleviate resources like coal, diesel, preservation of top soil, prevention of harmful emissions simultaneously managing the industrial waste.
Project Guide: Dr Shashank Bishnoi, Civil Engineering Department, IIT Delhi
Properties of Glass Fibre Reinforced Geopolymer ConcreteIJMER
International Journal of Modern Engineering Research (IJMER) is Peer reviewed, online Journal. It serves as an international archival forum of scholarly research related to engineering and science education.
International Journal of Modern Engineering Research (IJMER) covers all the fields of engineering and science: Electrical Engineering, Mechanical Engineering, Civil Engineering, Chemical Engineering, Computer Engineering, Agricultural Engineering, Aerospace Engineering, Thermodynamics, Structural Engineering, Control Engineering, Robotics, Mechatronics, Fluid Mechanics, Nanotechnology, Simulators, Web-based Learning, Remote Laboratories, Engineering Design Methods, Education Research, Students' Satisfaction and Motivation, Global Projects, and Assessment…. And many more.
Improved Concrete Properties Using Quarry Dust as Replacement for Natural SandIJERD Editor
Concrete plays a major role in the construction industry. Natural sand is a prime material used for
the preparation of concrete and also plays an important role in Mix Design. Now a day’s river erosion and other
environmental issues have led to the scarcity of river sand. The reduction in the sources of natural sand and the
requirement for reduction in the cost of concrete production has resulted in the increased need to find new
alternative materials to replace river sand so that excess river erosion is prevented and high strength concrete is
obtained at lower cost. One such material is Quarry stone dust: a by-product obtained during quarrying process.
Attempts have been made to study the suitability of Quarry dust as sand replacing material and it has been found
that Quarry dust improves the mechanical properties of concrete as well as elastic modulus. The optimum
compressive strength is achieved at the proportion of fine to coarse with 60:40 ratio
Experimental Study on High Strength Concrete using Industrial Wastesijtsrd
Generally the river sand is used as a fine aggregate on concrete and is obtained by mining the sand from river bed. Increased sand mining not only affects the aquifer of the river bed but also causes environmental problems. In recent days demand for river sand is increasing due to its lesser availability. Therefore the practice of replacing river sand with Metakaolin is taking a tremendous growth. It is inferred from the literature that replacement of Metakaolin upto 40 gives tremendous increase in the strength of the concrete above which the strength starts to decrease. Various literatures show that replacing with green sand 30 to 40 replacement seems to be effective. In both the cases the workability decreases with the increase in its quantity. Also Bottom ash and Metakaolin replacement results in the decrease of workability and it leads to uneconomic in the project. This paper presents the replacement of fine aggregate up to 40 . The river sand is replaced by Green sand, and Marble powder. The replacement levels of Green sand and marble powder varies from 5 , 10 , 15 and 20 . From the mix design, the w c ratio is taken to be 0.40. The specimens are to be casted, cured for the respective mix proportions and various strength characteristics of the concrete at 28 days are to be performed. The suitability of the replacement materials as fine aggregate for concrete has been assessed by comparing its strength. Sriram R | Mr. Prabakaran | Mrs. Uma Nambi ""Experimental Study on High Strength Concrete using Industrial Wastes"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-3 , April 2019, URL: https://www.ijtsrd.com/papers/ijtsrd23155.pdf
Paper URL: https://www.ijtsrd.com/engineering/civil-engineering/23155/experimental-study-on-high-strength-concrete-using-industrial-wastes/sriram-r
Comparatives study of M20 grade conventional concrete pavement with M20 grade...IJSRD
This project work involves an experimental and laboratory study of the Polypropylene fibers with two types of admixtures those are Quarry dust and Fly ash on the mechanical properties of the concrete used in the rigid pavement. In this experimental study involves two types of concrete mixes were prepared individually. Polypropylene fiber of 1% to 3% with Quarry dust of 0.1% to 0.3% and Polypropylene fiber of 1% to 4% with Fly ash of 0.1% to 0.4% by weight of cement were added to the mixes. After that a comparative analysis has been carried out for conventional concrete to that of the fiber reinforced in relation to their compressive, split tensile and flexural properties. By the experimental work the compressive, split tensile and flexural strengths are proportionally increased both Polypropylene + Quarry dust and Polypropylene +Fly ash usage. It is observed that the optimum dosages of Polypropylene + Quarry dust is 3% + 0.3% Polypropylene +Fly ash is 4%+ 0.4% by weight of cement. In this project cost analysis is also determined for conventional concrete and fiber reinforced with admixtures individually using experimental test reports. By analyzing the cost it was found that Polypropylene reinforced concrete with quarry dust pavement is economical than Polypropylene reinforced concrete with Fly ash pavement.
compressive strength of concrete containing milled glass as partial substitut...IJAEMSJORNAL
This work reports the outcome of an experiment carried out by using milled glass (MG) of varying percentages (20%, 40% and 60% by weight)of cement in concrete making. MG was sourced for and milled to required fineness. The concrete was batched with mix ratio of 1։2։ 4. Concrete Cube specimens produced were allowed to cure for 7-28 days and compressive strength, slump and setting time tests were carried out and were compared with those of conventional concrete (0% MG). Results obtained showed that compressive strength of the concrete increased with increase in length of curing age, but decreased as the percentage of MG increased. However, the strength still remained in the allowable range of workability for concrete in line with British standard. MG replacement of 20% was found to be the most suitable mix considering the strength and safe use of the concrete. It was concluded that MG replacement of 20% showed no significant loss in strength compared to the control sample and is stable and could be acceptable in most concrete. At the long run. Waste glass that currently constitutes waste concern in built environment in Nigeria can best be managed through alternative use in concrete production.
Pervious concrete is a concrete composite material consisting of coarse
aggregate, cement and water. Because of the absence of fine aggregate in the mixture,
the aggregates are bonded together at its points of contact by cement paste, resulting
in a high percentage of interconnected voids that, when functioning correctly, permit
the rapid percolation of water through the concrete. In this work, polypropylene
monofilament and fibrillated fibres are selected as raw materials in three varying
percentage. 0.2% of fiber is added by the total volume of concrete and a new method
for determining the permeability of pervious concrete that provides better design
methodology is used. The experimental test values of permeability are discussed and
validated using Avizo software. The mix design is done for the water to binder ratio of
0.30. Coarse aggregate of 10 mm and 4.75 mm are selected in order to reduce the
void content as per the ACI 522R-06 codal provision. The addition of polypropylene
fibers shows enhancement in mechanical properties of the pervious concrete as
expected
Development of unfired bricks using industrial waste Sandeep Jain
A research project aimed at production of an unfired, non-structural, binder brick with 100% waste material, using fly ash, pond ash, coal cinder, & paper sludge along with lime and gypsum system to alleviate resources like coal, diesel, preservation of top soil, prevention of harmful emissions simultaneously managing the industrial waste.
Project Guide: Dr Shashank Bishnoi, Civil Engineering Department, IIT Delhi
Properties of Glass Fibre Reinforced Geopolymer ConcreteIJMER
International Journal of Modern Engineering Research (IJMER) is Peer reviewed, online Journal. It serves as an international archival forum of scholarly research related to engineering and science education.
International Journal of Modern Engineering Research (IJMER) covers all the fields of engineering and science: Electrical Engineering, Mechanical Engineering, Civil Engineering, Chemical Engineering, Computer Engineering, Agricultural Engineering, Aerospace Engineering, Thermodynamics, Structural Engineering, Control Engineering, Robotics, Mechatronics, Fluid Mechanics, Nanotechnology, Simulators, Web-based Learning, Remote Laboratories, Engineering Design Methods, Education Research, Students' Satisfaction and Motivation, Global Projects, and Assessment…. And many more.
Improved Concrete Properties Using Quarry Dust as Replacement for Natural SandIJERD Editor
Concrete plays a major role in the construction industry. Natural sand is a prime material used for
the preparation of concrete and also plays an important role in Mix Design. Now a day’s river erosion and other
environmental issues have led to the scarcity of river sand. The reduction in the sources of natural sand and the
requirement for reduction in the cost of concrete production has resulted in the increased need to find new
alternative materials to replace river sand so that excess river erosion is prevented and high strength concrete is
obtained at lower cost. One such material is Quarry stone dust: a by-product obtained during quarrying process.
Attempts have been made to study the suitability of Quarry dust as sand replacing material and it has been found
that Quarry dust improves the mechanical properties of concrete as well as elastic modulus. The optimum
compressive strength is achieved at the proportion of fine to coarse with 60:40 ratio
Water scarcity is the lack of fresh water resources to meet the standard water demand. There are two type of water scarcity. One is physical. The other is economic water scarcity.
Saudi Arabia stands as a titan in the global energy landscape, renowned for its abundant oil and gas resources. It's the largest exporter of petroleum and holds some of the world's most significant reserves. Let's delve into the top 10 oil and gas projects shaping Saudi Arabia's energy future in 2024.
Overview of the fundamental roles in Hydropower generation and the components involved in wider Electrical Engineering.
This paper presents the design and construction of hydroelectric dams from the hydrologist’s survey of the valley before construction, all aspects and involved disciplines, fluid dynamics, structural engineering, generation and mains frequency regulation to the very transmission of power through the network in the United Kingdom.
Author: Robbie Edward Sayers
Collaborators and co editors: Charlie Sims and Connor Healey.
(C) 2024 Robbie E. Sayers
Hybrid optimization of pumped hydro system and solar- Engr. Abdul-Azeez.pdffxintegritypublishin
Advancements in technology unveil a myriad of electrical and electronic breakthroughs geared towards efficiently harnessing limited resources to meet human energy demands. The optimization of hybrid solar PV panels and pumped hydro energy supply systems plays a pivotal role in utilizing natural resources effectively. This initiative not only benefits humanity but also fosters environmental sustainability. The study investigated the design optimization of these hybrid systems, focusing on understanding solar radiation patterns, identifying geographical influences on solar radiation, formulating a mathematical model for system optimization, and determining the optimal configuration of PV panels and pumped hydro storage. Through a comparative analysis approach and eight weeks of data collection, the study addressed key research questions related to solar radiation patterns and optimal system design. The findings highlighted regions with heightened solar radiation levels, showcasing substantial potential for power generation and emphasizing the system's efficiency. Optimizing system design significantly boosted power generation, promoted renewable energy utilization, and enhanced energy storage capacity. The study underscored the benefits of optimizing hybrid solar PV panels and pumped hydro energy supply systems for sustainable energy usage. Optimizing the design of solar PV panels and pumped hydro energy supply systems as examined across diverse climatic conditions in a developing country, not only enhances power generation but also improves the integration of renewable energy sources and boosts energy storage capacities, particularly beneficial for less economically prosperous regions. Additionally, the study provides valuable insights for advancing energy research in economically viable areas. Recommendations included conducting site-specific assessments, utilizing advanced modeling tools, implementing regular maintenance protocols, and enhancing communication among system components.
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)MdTanvirMahtab2
This presentation is about the working procedure of Shahjalal Fertilizer Company Limited (SFCL). A Govt. owned Company of Bangladesh Chemical Industries Corporation under Ministry of Industries.
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...Amil Baba Dawood bangali
Contact with Dawood Bhai Just call on +92322-6382012 and we'll help you. We'll solve all your problems within 12 to 24 hours and with 101% guarantee and with astrology systematic. If you want to take any personal or professional advice then also you can call us on +92322-6382012 , ONLINE LOVE PROBLEM & Other all types of Daily Life Problem's.Then CALL or WHATSAPP us on +92322-6382012 and Get all these problems solutions here by Amil Baba DAWOOD BANGALI
#vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore#blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #blackmagicforlove #blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #Amilbabainuk #amilbabainspain #amilbabaindubai #Amilbabainnorway #amilbabainkrachi #amilbabainlahore #amilbabaingujranwalan #amilbabainislamabad
Automobile Management System Project Report.pdfKamal Acharya
The proposed project is developed to manage the automobile in the automobile dealer company. The main module in this project is login, automobile management, customer management, sales, complaints and reports. The first module is the login. The automobile showroom owner should login to the project for usage. The username and password are verified and if it is correct, next form opens. If the username and password are not correct, it shows the error message.
When a customer search for a automobile, if the automobile is available, they will be taken to a page that shows the details of the automobile including automobile name, automobile ID, quantity, price etc. “Automobile Management System” is useful for maintaining automobiles, customers effectively and hence helps for establishing good relation between customer and automobile organization. It contains various customized modules for effectively maintaining automobiles and stock information accurately and safely.
When the automobile is sold to the customer, stock will be reduced automatically. When a new purchase is made, stock will be increased automatically. While selecting automobiles for sale, the proposed software will automatically check for total number of available stock of that particular item, if the total stock of that particular item is less than 5, software will notify the user to purchase the particular item.
Also when the user tries to sale items which are not in stock, the system will prompt the user that the stock is not enough. Customers of this system can search for a automobile; can purchase a automobile easily by selecting fast. On the other hand the stock of automobiles can be maintained perfectly by the automobile shop manager overcoming the drawbacks of existing system.
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...Dr.Costas Sachpazis
Terzaghi's soil bearing capacity theory, developed by Karl Terzaghi, is a fundamental principle in geotechnical engineering used to determine the bearing capacity of shallow foundations. This theory provides a method to calculate the ultimate bearing capacity of soil, which is the maximum load per unit area that the soil can support without undergoing shear failure. The Calculation HTML Code included.
Cosmetic shop management system project report.pdfKamal Acharya
Buying new cosmetic products is difficult. It can even be scary for those who have sensitive skin and are prone to skin trouble. The information needed to alleviate this problem is on the back of each product, but it's thought to interpret those ingredient lists unless you have a background in chemistry.
Instead of buying and hoping for the best, we can use data science to help us predict which products may be good fits for us. It includes various function programs to do the above mentioned tasks.
Data file handling has been effectively used in the program.
The automated cosmetic shop management system should deal with the automation of general workflow and administration process of the shop. The main processes of the system focus on customer's request where the system is able to search the most appropriate products and deliver it to the customers. It should help the employees to quickly identify the list of cosmetic product that have reached the minimum quantity and also keep a track of expired date for each cosmetic product. It should help the employees to find the rack number in which the product is placed.It is also Faster and more efficient way.
Explore the innovative world of trenchless pipe repair with our comprehensive guide, "The Benefits and Techniques of Trenchless Pipe Repair." This document delves into the modern methods of repairing underground pipes without the need for extensive excavation, highlighting the numerous advantages and the latest techniques used in the industry.
Learn about the cost savings, reduced environmental impact, and minimal disruption associated with trenchless technology. Discover detailed explanations of popular techniques such as pipe bursting, cured-in-place pipe (CIPP) lining, and directional drilling. Understand how these methods can be applied to various types of infrastructure, from residential plumbing to large-scale municipal systems.
Ideal for homeowners, contractors, engineers, and anyone interested in modern plumbing solutions, this guide provides valuable insights into why trenchless pipe repair is becoming the preferred choice for pipe rehabilitation. Stay informed about the latest advancements and best practices in the field.