IRJET- A Review Paper on the Production Line of an Aluminum Alloy Wheel Manufacturing Industry and to Improve the Quality of Production using Quality Control Tools
This document summarizes a research paper on improving quality in an aluminum alloy wheel manufacturing industry. It discusses defects commonly found during the manufacturing process such as shrinkage, non-metallic inclusions, micro-cavities, and gas holes. Quality control tools like check sheets, Pareto diagrams, and cause-effect diagrams are used to analyze defects. Major causes of defects found were shrinkage, non-metallic inclusions, and micro-cavities. Fishbone diagrams were used to evaluate specific causes of shrinkage defects during casting. Overall, the document reviews the aluminum alloy wheel production process and quality improvement methods using quality control tools.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
The present research work demonstrates the
preparation of Copper Oxide Nanoparticles (CuO NPs) and
investigates the thermo mechanical properties of the CuO NPs
embedded in the polymer composites experimentally. In this study,
CuO NPs were produced by aqueous precipitation method and
morphology of the NPs was studied using Field Emission
Transmission Electron Microscope (FESEM). Epoxy resin and glass microsphere were considered the base material for the preparation of
the Nano based polymer composites. In order to fabricate the Nano
based polymer composites, CuO NPs with 1.0wtpercentage were
embedded in the base material by means of compression moulding
press. Nano composites proved higher thermal conductivity
enhancement rather than the base material. While comparing to the
base material, the maximum four-point bending strength of 415 MPa
was obtained from the Nano based polymer composites. The test
results obtained from the TG study revealed that an addition of CuO
NPs had acted as the thermal retardant and CuO NPs had delayed
thermal degradation of the Nano based polymer composites. Based
on the test results, it can be suggested that the newly fabricated
nanocomposites have achieved the improved thermal and mechanical
properties.
Calico Metal Alloys LLP leading Monel K500 ASTM B127 Plates manufacturers. We pride ourselves on being at the forefront of innovation in both product lines and after sales services.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
The present research work demonstrates the
preparation of Copper Oxide Nanoparticles (CuO NPs) and
investigates the thermo mechanical properties of the CuO NPs
embedded in the polymer composites experimentally. In this study,
CuO NPs were produced by aqueous precipitation method and
morphology of the NPs was studied using Field Emission
Transmission Electron Microscope (FESEM). Epoxy resin and glass microsphere were considered the base material for the preparation of
the Nano based polymer composites. In order to fabricate the Nano
based polymer composites, CuO NPs with 1.0wtpercentage were
embedded in the base material by means of compression moulding
press. Nano composites proved higher thermal conductivity
enhancement rather than the base material. While comparing to the
base material, the maximum four-point bending strength of 415 MPa
was obtained from the Nano based polymer composites. The test
results obtained from the TG study revealed that an addition of CuO
NPs had acted as the thermal retardant and CuO NPs had delayed
thermal degradation of the Nano based polymer composites. Based
on the test results, it can be suggested that the newly fabricated
nanocomposites have achieved the improved thermal and mechanical
properties.
Calico Metal Alloys LLP leading Monel K500 ASTM B127 Plates manufacturers. We pride ourselves on being at the forefront of innovation in both product lines and after sales services.
Wear Analysis of Tool in Milling YTL7D SteelIJRES Journal
In the process of milling die steel YTL7D, the properties of high hardness and high wear resistance of
the workpiece material led to that the tool Subjected to severe wear, and the life of the tool is lower. In this
research, the wear law of rake face and flank face of the ball end mill was discussed. And the tool wear
mechanism in the process of milling YTL7D steel is revealed in this paper, to provide a theoretical guidance for
the development of rational process and follow-up studies.
International Journal of Engineering Research and DevelopmentIJERD Editor
Electrical, Electronics and Computer Engineering,
Information Engineering and Technology,
Mechanical, Industrial and Manufacturing Engineering,
Automation and Mechatronics Engineering,
Material and Chemical Engineering,
Civil and Architecture Engineering,
Biotechnology and Bio Engineering,
Environmental Engineering,
Petroleum and Mining Engineering,
Marine and Agriculture engineering,
Aerospace Engineering.
Wear Analysis of Tool in Milling YTL7D SteelIJRES Journal
In the process of milling die steel YTL7D, the properties of high hardness and high wear resistance of
the workpiece material led to that the tool Subjected to severe wear, and the life of the tool is lower. In this
research, the wear law of rake face and flank face of the ball end mill was discussed. And the tool wear
mechanism in the process of milling YTL7D steel is revealed in this paper, to provide a theoretical guidance for
the development of rational process and follow-up studies.
Similar to IRJET- A Review Paper on the Production Line of an Aluminum Alloy Wheel Manufacturing Industry and to Improve the Quality of Production using Quality Control Tools
International Journal of Engineering Research and DevelopmentIJERD Editor
Electrical, Electronics and Computer Engineering,
Information Engineering and Technology,
Mechanical, Industrial and Manufacturing Engineering,
Automation and Mechatronics Engineering,
Material and Chemical Engineering,
Civil and Architecture Engineering,
Biotechnology and Bio Engineering,
Environmental Engineering,
Petroleum and Mining Engineering,
Marine and Agriculture engineering,
Aerospace Engineering.
Review on Effect of Process Parameters - Friction Stir Welding ProcessIRJET Journal
https://irjet.net/archives/V4/i7/IRJET-V4I747.pdf
Similar to IRJET- A Review Paper on the Production Line of an Aluminum Alloy Wheel Manufacturing Industry and to Improve the Quality of Production using Quality Control Tools (20)
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.
Cosmetic shop management system project report.pdfKamal Acharya
Buying new cosmetic products is difficult. It can even be scary for those who have sensitive skin and are prone to skin trouble. The information needed to alleviate this problem is on the back of each product, but it's thought to interpret those ingredient lists unless you have a background in chemistry.
Instead of buying and hoping for the best, we can use data science to help us predict which products may be good fits for us. It includes various function programs to do the above mentioned tasks.
Data file handling has been effectively used in the program.
The automated cosmetic shop management system should deal with the automation of general workflow and administration process of the shop. The main processes of the system focus on customer's request where the system is able to search the most appropriate products and deliver it to the customers. It should help the employees to quickly identify the list of cosmetic product that have reached the minimum quantity and also keep a track of expired date for each cosmetic product. It should help the employees to find the rack number in which the product is placed.It is also Faster and more efficient way.
Forklift Classes Overview by Intella PartsIntella Parts
Discover the different forklift classes and their specific applications. Learn how to choose the right forklift for your needs to ensure safety, efficiency, and compliance in your operations.
For more technical information, visit our website https://intellaparts.com
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...Amil Baba Dawood bangali
Contact with Dawood Bhai Just call on +92322-6382012 and we'll help you. We'll solve all your problems within 12 to 24 hours and with 101% guarantee and with astrology systematic. If you want to take any personal or professional advice then also you can call us on +92322-6382012 , ONLINE LOVE PROBLEM & Other all types of Daily Life Problem's.Then CALL or WHATSAPP us on +92322-6382012 and Get all these problems solutions here by Amil Baba DAWOOD BANGALI
#vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore#blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #blackmagicforlove #blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #Amilbabainuk #amilbabainspain #amilbabaindubai #Amilbabainnorway #amilbabainkrachi #amilbabainlahore #amilbabaingujranwalan #amilbabainislamabad
CW RADAR, FMCW RADAR, FMCW ALTIMETER, AND THEIR PARAMETERSveerababupersonal22
It consists of cw radar and fmcw radar ,range measurement,if amplifier and fmcw altimeterThe CW radar operates using continuous wave transmission, while the FMCW radar employs frequency-modulated continuous wave technology. Range measurement is a crucial aspect of radar systems, providing information about the distance to a target. The IF amplifier plays a key role in signal processing, amplifying intermediate frequency signals for further analysis. The FMCW altimeter utilizes frequency-modulated continuous wave technology to accurately measure altitude above a reference point.
HEAP SORT ILLUSTRATED WITH HEAPIFY, BUILD HEAP FOR DYNAMIC ARRAYS.
Heap sort is a comparison-based sorting technique based on Binary Heap data structure. It is similar to the selection sort where we first find the minimum element and place the minimum element at the beginning. Repeat the same process for the remaining elements.
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...Dr.Costas Sachpazis
Terzaghi's soil bearing capacity theory, developed by Karl Terzaghi, is a fundamental principle in geotechnical engineering used to determine the bearing capacity of shallow foundations. This theory provides a method to calculate the ultimate bearing capacity of soil, which is the maximum load per unit area that the soil can support without undergoing shear failure. The Calculation HTML Code included.
6th International Conference on Machine Learning & Applications (CMLA 2024)ClaraZara1
6th International Conference on Machine Learning & Applications (CMLA 2024) will provide an excellent international forum for sharing knowledge and results in theory, methodology and applications of on Machine Learning & Applications.
Hierarchical Digital Twin of a Naval Power SystemKerry Sado
A hierarchical digital twin of a Naval DC power system has been developed and experimentally verified. Similar to other state-of-the-art digital twins, this technology creates a digital replica of the physical system executed in real-time or faster, which can modify hardware controls. However, its advantage stems from distributing computational efforts by utilizing a hierarchical structure composed of lower-level digital twin blocks and a higher-level system digital twin. Each digital twin block is associated with a physical subsystem of the hardware and communicates with a singular system digital twin, which creates a system-level response. By extracting information from each level of the hierarchy, power system controls of the hardware were reconfigured autonomously. This hierarchical digital twin development offers several advantages over other digital twins, particularly in the field of naval power systems. The hierarchical structure allows for greater computational efficiency and scalability while the ability to autonomously reconfigure hardware controls offers increased flexibility and responsiveness. The hierarchical decomposition and models utilized were well aligned with the physical twin, as indicated by the maximum deviations between the developed digital twin hierarchy and the hardware.
Governing Equations for Fundamental Aerodynamics_Anderson2010.pdf
IRJET- A Review Paper on the Production Line of an Aluminum Alloy Wheel Manufacturing Industry and to Improve the Quality of Production using Quality Control Tools