Contract finish 1
•
1 like•209 views
This document contains two case studies describing machined parts that were polished in preparation for chrome plating. The first case study describes a 1.25" diameter by 3" long brass coupling that was cut and polished to remove tooling marks and burrs. The second case study discusses alloy steel handgun slides measuring 1" by 1" by 8" that were polished using appropriate media to prepare the surfaces for plating by removing burrs and improving quality.
Report
Share
Report
Share
Download to read offline
Recommended
Stainless steel finishes
Stainless steel finishing can be a complex to solve. There are many different types of surface finishes and profiles that may be required.
All you need to know about Hot Dip Galvanizing
This document discusses hot dip galvanizing, which provides superior corrosion protection for machinery used in corrosive environments. It involves cleaning and dipping metal components in acid and then molten zinc. This results in uniform coating that self-heals scratches and lasts much longer than paint. However, it is more expensive due to additional processing steps and may cause distortion or inconsistent coloring of parts. While providing excellent longevity, hot dip galvanizing also has downsides related to cost, delivery times, and potential issues from heat distortion.
Ravindra metal-industries
Ravindra Metal Industries is a manufacturer and exporter of automotive and industrial castings established in 1982 in Pune, India. They produce a wide range of sand castings, aluminum die castings, and bronze castings. The company uses high quality materials and stringent quality control to produce durable, corrosion resistant castings for automotive and industrial applications.
ACE305: Aircraft Components Design and Manufacture
The document discusses general design considerations for metal castings. It notes that successful casting requires controlling variables related to the metal, casting method, mold materials, mold design, and process parameters. It describes steps for robust casting design, including designing the part for easy casting, selecting suitable materials and process, locating parting lines and gates, and including features like risers. It also discusses avoiding defects by modifying part geometries, allowing for shrinkage, adding drafts and finishes, and considering post-casting machining needs.
Buttweld 1.5 d elbow
BUTTWELD 1.5D ELBOW MANUFACTURERS IN INDIA
We are Global Manufacturers, Stockist, and Exporters of High Quality 1.5D Elbows, ANSI B16.9 1.5D Elbow, ASTM A403 SS 1.5D Elbow, Nickel Alloy 200 1.5D Elbow, Monel Buttweld 1.5D Elbow, 304 SS 1.5D Elbow, Stainless Steel 1.5D Elbow, Buttweld 1.5D Elbow Fittings, Alloy Steel 1.5D Elbow, Duplex Steel 1.5D Elbow Fittings, Butt Weld 1.5D Elbow, ASME B16.9 1.5D Elbow, 1.5D Elbow available in all dimensions.
Mumbai, India based Suppliers of Steel Butt weld 1.5D Elbow, 1.5D 90 Elbow, Alloy 20 Buttweld 1.5D Elbow, Inconel Buttweld 1.5D Elbow, Copper Nickel 1.5D Elbow, Hastelloy C22 1.5D Elbow, 1.5D 90 Degree Elbow, Butt weld 1.5D Elbow at most Reasonable Prices in India.
ACE305: Aircraft Components Design and Manufacture
Machining is used to modify parts after casting or forming to achieve desired surface finishes, dimensions, and tolerances. It involves removing material through cutting processes like turning, milling, and drilling. Parts often require machining to produce features like smooth bearing surfaces, small deep holes, sharp edges, threads, and close tolerances that cannot be achieved through casting or forming alone. Machining also imparts special surface textures and finishes.
Virat special steels pvt ltd
Virat Special Steels Pvt Ltd is the largest supplier, distributor, and stockist of hot work steel, cold work steel, plastic mold steel in India and other countries.
Machinability of tool steels
This document discusses the machinability of various tool steels. It provides information on different types of tool steels classified by the AISI and how their machinability is influenced by factors like composition, microstructure, and heat treatment. Machining operations like turning, drilling, milling, and face milling of tool steels are also covered, outlining tool materials, speeds/feeds, cutting fluids, and heat treatments used for optimal machinability. Tool steels require special machining techniques due to their high hardness, carbon content, and alloying elements.
Recommended
Stainless steel finishes
Stainless steel finishing can be a complex to solve. There are many different types of surface finishes and profiles that may be required.
All you need to know about Hot Dip Galvanizing
This document discusses hot dip galvanizing, which provides superior corrosion protection for machinery used in corrosive environments. It involves cleaning and dipping metal components in acid and then molten zinc. This results in uniform coating that self-heals scratches and lasts much longer than paint. However, it is more expensive due to additional processing steps and may cause distortion or inconsistent coloring of parts. While providing excellent longevity, hot dip galvanizing also has downsides related to cost, delivery times, and potential issues from heat distortion.
Ravindra metal-industries
Ravindra Metal Industries is a manufacturer and exporter of automotive and industrial castings established in 1982 in Pune, India. They produce a wide range of sand castings, aluminum die castings, and bronze castings. The company uses high quality materials and stringent quality control to produce durable, corrosion resistant castings for automotive and industrial applications.
ACE305: Aircraft Components Design and Manufacture
The document discusses general design considerations for metal castings. It notes that successful casting requires controlling variables related to the metal, casting method, mold materials, mold design, and process parameters. It describes steps for robust casting design, including designing the part for easy casting, selecting suitable materials and process, locating parting lines and gates, and including features like risers. It also discusses avoiding defects by modifying part geometries, allowing for shrinkage, adding drafts and finishes, and considering post-casting machining needs.
Buttweld 1.5 d elbow
BUTTWELD 1.5D ELBOW MANUFACTURERS IN INDIA
We are Global Manufacturers, Stockist, and Exporters of High Quality 1.5D Elbows, ANSI B16.9 1.5D Elbow, ASTM A403 SS 1.5D Elbow, Nickel Alloy 200 1.5D Elbow, Monel Buttweld 1.5D Elbow, 304 SS 1.5D Elbow, Stainless Steel 1.5D Elbow, Buttweld 1.5D Elbow Fittings, Alloy Steel 1.5D Elbow, Duplex Steel 1.5D Elbow Fittings, Butt Weld 1.5D Elbow, ASME B16.9 1.5D Elbow, 1.5D Elbow available in all dimensions.
Mumbai, India based Suppliers of Steel Butt weld 1.5D Elbow, 1.5D 90 Elbow, Alloy 20 Buttweld 1.5D Elbow, Inconel Buttweld 1.5D Elbow, Copper Nickel 1.5D Elbow, Hastelloy C22 1.5D Elbow, 1.5D 90 Degree Elbow, Butt weld 1.5D Elbow at most Reasonable Prices in India.
ACE305: Aircraft Components Design and Manufacture
Machining is used to modify parts after casting or forming to achieve desired surface finishes, dimensions, and tolerances. It involves removing material through cutting processes like turning, milling, and drilling. Parts often require machining to produce features like smooth bearing surfaces, small deep holes, sharp edges, threads, and close tolerances that cannot be achieved through casting or forming alone. Machining also imparts special surface textures and finishes.
Virat special steels pvt ltd
Virat Special Steels Pvt Ltd is the largest supplier, distributor, and stockist of hot work steel, cold work steel, plastic mold steel in India and other countries.
Machinability of tool steels
This document discusses the machinability of various tool steels. It provides information on different types of tool steels classified by the AISI and how their machinability is influenced by factors like composition, microstructure, and heat treatment. Machining operations like turning, drilling, milling, and face milling of tool steels are also covered, outlining tool materials, speeds/feeds, cutting fluids, and heat treatments used for optimal machinability. Tool steels require special machining techniques due to their high hardness, carbon content, and alloying elements.
L1 introduction to manufacturing processes
This document discusses manufacturing and welding processes. It defines manufacturing as applying physical or chemical processes to materials to alter their geometry, properties, or appearance. It also describes value addition through processing or assembly. The document then discusses various manufacturing processes like shaping, joining, surface treatments, and classifications. It provides details on different welding processes like gas, arc, resistance, solid state, and their applications in industries. It also covers commonly welded metals, advantages and disadvantages of welding, and comparisons to casting and riveting. Edge preparations for different weld joints and uses of filler metals and fluxes in welding are summarized.
Know More About Steel Fabrication for Industries!
Steel fabrication is one of the essential portions of the entire manufacturing process. With all the shaping, cutting, assembling steel building components, steel holds a great value for all industries.
A Guide to Aluminum Extrusion
Aluminum extrusion operations vary from project to project, depending on the part and production specifications. However, in general, they follow the same basic process, which includes the following steps:
Grey Cast Iron Grades Composition and Properties
This document provides information on grey cast iron materials from Qingdao Casting Quality Industrial Co., Ltd., including:
1. Descriptions of the composition, properties, and grades of grey cast iron.
2. Tables listing mechanical properties like tensile strength for different grades and casting thicknesses.
3. Suggested chemical compositions for different grades.
4. Information on heat treatment and how it affects hardness and microstructure.
Investment Casting FAQ
Investment casting is a manufacturing process that involves creating wax replicas of parts, surrounding them in ceramic shells, melting out the wax, and pouring molten metal into the shells. It allows for the production of complex, near-net shape metal parts. Investment castings can be made in a variety of alloys and sizes, from small dental braces to large aircraft engine components. The process provides excellent surface finishes and tight tolerances, reducing machining needs. While tooling costs are higher than other casting methods, investment casting is often more cost effective due to reduced post-casting machining.
Continuous casting of steel
This is the presentation on Continuous casting of steel, types and defects along with electromagnetic stirrer.
Marketing Strategy for a Steel Manufacturing Company
Welsh Consultants publishes its White Paper outlining what could be an actionable Marketing Strategy for a Steel Manufacturing Compan
FSW of Aluminum Group 5
Friction Stir welding ( process , parameters , weld zones , microstructure , mechanical properties , Pros & cons , defects , Applications , apps in aerospace , Bobbing )
Unisteels & Engineering Company Private Limited, Mumbai, Ferrous and Non Ferr...
Unisteels & Engineering Company Private Limited, Mumbai, Ferrous and Non Ferr...IndiaMART InterMESH Limited
Supplier and Exporter of Duplex Seamless Pipes, Duplex Fabricated Pipes, Duplex Welded Pipes, Duplex Seamless Tubes.Weld Defects and Material Properties - Presentation
This document discusses weld defects, specifically porosity in welds. It defines porosity as gas holes or voids found within a weld caused when gases trapped in the weld do not escape as it solidifies. The document outlines the main causes of porosity as dirt and moisture, describes the detrimental effects on strength and fatigue life, and provides methods for preventing and detecting porosity, including maintaining cleanliness and using non-destructive testing techniques.
Friction stir welding of high strength aluminium alloys
The document summarizes a seminar presentation on friction stir welding of high-strength aluminum alloys. It discusses friction stir welding techniques, properties of 7XXX and 2XXX aluminum alloys, applications of friction stir welding in aerospace and other industries, and challenges and opportunities for further research. Friction stir welding is described as a solid-state welding process that was invented in 1991 and provides advantages over conventional welding of aluminum, including fewer defects, no filler required, and improved mechanical properties of the welded joint. The presentation focuses on welding high-strength 7XXX and 2XXX aluminum alloys used in aerospace applications.
High pressure die casting
- Metal die casting involves filling molten metal into a mold under high pressure, giving castings superior metallurgical properties, high rigidity, and strength over sand castings. This process can be used to cast aluminum, zinc, and alloy metals in sizes ranging from ounces to over 100 pounds.
- The automotive industry is the largest market for aluminum castings, with cast products making up over 50% of the aluminum in cars. High pressure die casting is used to produce aluminum die castings and components from high quality alloys.
- Two new technical reports are proposed to promote quality and efficiency in the die casting field by classifying casting defects and detailing mechanical properties of aluminum foundry alloys.
Friction stir welding
Friction-stir welding is an advanced solid-state joining process (the metal is not melted) which involves the use of a third body tool to join two facing surfaces. Heat is generated between the tool and material which leads to a very soft region near the FSW tool. It then mechanically intermixes the two pieces of metal at the place of the joint, then the softened metal (due to the elevated temperature) can be joined using mechanical pressure (which is applied by the tool), much like joining clay, or dough. It is primarily used on aluminium, and most often on extruded aluminium (non-heat treatable alloys), and on structures which need superior weld strength without a post weld heat treatment.
It was invented and experimentally proven at The Welding Institute UK in December 1991.
Portofolio 2016
This document is Alfred Fiedler's resume. It consists of 3 pages summarizing his qualifications, certificates, and welding experience. As a journeyman welder with a Red Seal certification, Alfred has experience welding steel, aluminum, and stainless steel using various welding processes. He has over 5,000 hours of welding experience and has worked on projects involving structural steel, gates, railings, and more. Alfred is passionate about welding and has experience working in both shop and field environments.
Tefco forging-and-engineering
Established in the year 1955, we, Tefco Forging and Engineering are known for the purpose of manufacturing and supplying the premium quality of Industrial Fasteners & Rods.
ACE305: Aircraft Components Design and Manufacture
This document discusses various joining processes used in automobile manufacturing. It describes oxyfuel gas welding, which uses a flame from oxygen and fuel gas like acetylene to melt metals. Arc welding processes that use a consumable electrode include shielded metal arc welding, where a coated metal electrode is manually held to create an arc and weld pool. Gas tungsten arc welding uses a non-consumable tungsten electrode and filler wire to produce welds. The document also covers plasma arc welding and other joining techniques.
Welding defects
This document discusses various welding defects such as slag inclusion, undercut, porosity, incomplete fusion, overlap, underfill, spatter, excessive convexity, incomplete penetration, and excessive penetration. It provides the causes and ways to prevent or repair each defect. Nondestructive and destructive testing methods for inspecting welds are also summarized, including visual inspection, ultrasonic testing, radiographic testing, dye penetrant testing, magnetic particle testing, and mechanical tests.
Fsw optimization for dissimilar aluminium alloys (Presentation)
This dissertation examines the parametric optimization of friction stir welding (FSW) when joining dissimilar aluminum alloys. The document outlines the methodology, which includes: selecting critical welding parameters; designing experiments using a fractional factorial design of experiments approach in Minitab; conducting FSW experiments; analyzing tensile strength and hardness results; and developing mathematical models. Regression analysis identified tool tip plunge depth, shoulder diameter, tilt angle, and tool shape as significant parameters. Interactions between parameters also influenced weld strength. The study aims to optimize FSW of dissimilar aluminum alloys for applications like shipbuilding and aerospace.
Effects and defects of the polypropylene plate for different parameters in fr...
Effects and defects of the polypropylene plate for different parameters in fr...eSAT Publishing House
1. The document analyzes the effects of different parameters on friction stir welding of polypropylene plates, including tool pin profile, rotational speed, and welding speed.
2. Microstructural images and hardness tests were used to evaluate the quality of the welds under different conditions.
3. The results showed that a threaded pin profile with rotational speed of 2250 rpm and welding speed of 40-50 mm/min produced welds with the fewest defects in the polypropylene material.Mfg tooling 04 cutting tool design
This document discusses cutting tool materials and their properties. It covers various tool materials including carbon steels, high-speed steel, cemented carbides, ceramics, and diamond. Cemented carbides are the most commonly used and contain tungsten carbide and a cobalt binder. The document provides details on selecting cutting tool materials based on the application, and guidelines for cutting tool design including tool angles and operating conditions.
Tap and Faucet Casting
This document explores material and casting process options for manufacturing a hypothetical tap and faucet design. It considers stainless steel, copper, brass, and aluminum alloys as potential materials. Brass is selected due to its corrosion resistance, machinability, ability to be plated, and cost effectiveness. The permanent mould casting process is chosen as it produces a smooth finish at low cost while allowing high production volumes without die replacement. This process and DCB3 die casting brass meet the design requirements of affordability, quality, lifespan, and production timelines for the mid-market brand.
Competent aluminium die casting producer in china
This document summarizes the services of an aluminum die throwing provider in China. They offer precision machining services including CNC milling, lathe work, and die throwing for prototype and mass production parts made of materials like aluminum, copper, steel, and magnesium alloys. They also provide anodizing services. They aim to be a reliable partner for OEM and ODM manufacturers in the metal die casting industry.
More Related Content
What's hot
L1 introduction to manufacturing processes
This document discusses manufacturing and welding processes. It defines manufacturing as applying physical or chemical processes to materials to alter their geometry, properties, or appearance. It also describes value addition through processing or assembly. The document then discusses various manufacturing processes like shaping, joining, surface treatments, and classifications. It provides details on different welding processes like gas, arc, resistance, solid state, and their applications in industries. It also covers commonly welded metals, advantages and disadvantages of welding, and comparisons to casting and riveting. Edge preparations for different weld joints and uses of filler metals and fluxes in welding are summarized.
Know More About Steel Fabrication for Industries!
Steel fabrication is one of the essential portions of the entire manufacturing process. With all the shaping, cutting, assembling steel building components, steel holds a great value for all industries.
A Guide to Aluminum Extrusion
Aluminum extrusion operations vary from project to project, depending on the part and production specifications. However, in general, they follow the same basic process, which includes the following steps:
Grey Cast Iron Grades Composition and Properties
This document provides information on grey cast iron materials from Qingdao Casting Quality Industrial Co., Ltd., including:
1. Descriptions of the composition, properties, and grades of grey cast iron.
2. Tables listing mechanical properties like tensile strength for different grades and casting thicknesses.
3. Suggested chemical compositions for different grades.
4. Information on heat treatment and how it affects hardness and microstructure.
Investment Casting FAQ
Investment casting is a manufacturing process that involves creating wax replicas of parts, surrounding them in ceramic shells, melting out the wax, and pouring molten metal into the shells. It allows for the production of complex, near-net shape metal parts. Investment castings can be made in a variety of alloys and sizes, from small dental braces to large aircraft engine components. The process provides excellent surface finishes and tight tolerances, reducing machining needs. While tooling costs are higher than other casting methods, investment casting is often more cost effective due to reduced post-casting machining.
Continuous casting of steel
This is the presentation on Continuous casting of steel, types and defects along with electromagnetic stirrer.
Marketing Strategy for a Steel Manufacturing Company
Welsh Consultants publishes its White Paper outlining what could be an actionable Marketing Strategy for a Steel Manufacturing Compan
FSW of Aluminum Group 5
Friction Stir welding ( process , parameters , weld zones , microstructure , mechanical properties , Pros & cons , defects , Applications , apps in aerospace , Bobbing )
Unisteels & Engineering Company Private Limited, Mumbai, Ferrous and Non Ferr...
Unisteels & Engineering Company Private Limited, Mumbai, Ferrous and Non Ferr...IndiaMART InterMESH Limited
Supplier and Exporter of Duplex Seamless Pipes, Duplex Fabricated Pipes, Duplex Welded Pipes, Duplex Seamless Tubes.Weld Defects and Material Properties - Presentation
This document discusses weld defects, specifically porosity in welds. It defines porosity as gas holes or voids found within a weld caused when gases trapped in the weld do not escape as it solidifies. The document outlines the main causes of porosity as dirt and moisture, describes the detrimental effects on strength and fatigue life, and provides methods for preventing and detecting porosity, including maintaining cleanliness and using non-destructive testing techniques.
Friction stir welding of high strength aluminium alloys
The document summarizes a seminar presentation on friction stir welding of high-strength aluminum alloys. It discusses friction stir welding techniques, properties of 7XXX and 2XXX aluminum alloys, applications of friction stir welding in aerospace and other industries, and challenges and opportunities for further research. Friction stir welding is described as a solid-state welding process that was invented in 1991 and provides advantages over conventional welding of aluminum, including fewer defects, no filler required, and improved mechanical properties of the welded joint. The presentation focuses on welding high-strength 7XXX and 2XXX aluminum alloys used in aerospace applications.
High pressure die casting
- Metal die casting involves filling molten metal into a mold under high pressure, giving castings superior metallurgical properties, high rigidity, and strength over sand castings. This process can be used to cast aluminum, zinc, and alloy metals in sizes ranging from ounces to over 100 pounds.
- The automotive industry is the largest market for aluminum castings, with cast products making up over 50% of the aluminum in cars. High pressure die casting is used to produce aluminum die castings and components from high quality alloys.
- Two new technical reports are proposed to promote quality and efficiency in the die casting field by classifying casting defects and detailing mechanical properties of aluminum foundry alloys.
Friction stir welding
Friction-stir welding is an advanced solid-state joining process (the metal is not melted) which involves the use of a third body tool to join two facing surfaces. Heat is generated between the tool and material which leads to a very soft region near the FSW tool. It then mechanically intermixes the two pieces of metal at the place of the joint, then the softened metal (due to the elevated temperature) can be joined using mechanical pressure (which is applied by the tool), much like joining clay, or dough. It is primarily used on aluminium, and most often on extruded aluminium (non-heat treatable alloys), and on structures which need superior weld strength without a post weld heat treatment.
It was invented and experimentally proven at The Welding Institute UK in December 1991.
Portofolio 2016
This document is Alfred Fiedler's resume. It consists of 3 pages summarizing his qualifications, certificates, and welding experience. As a journeyman welder with a Red Seal certification, Alfred has experience welding steel, aluminum, and stainless steel using various welding processes. He has over 5,000 hours of welding experience and has worked on projects involving structural steel, gates, railings, and more. Alfred is passionate about welding and has experience working in both shop and field environments.
Tefco forging-and-engineering
Established in the year 1955, we, Tefco Forging and Engineering are known for the purpose of manufacturing and supplying the premium quality of Industrial Fasteners & Rods.
ACE305: Aircraft Components Design and Manufacture
This document discusses various joining processes used in automobile manufacturing. It describes oxyfuel gas welding, which uses a flame from oxygen and fuel gas like acetylene to melt metals. Arc welding processes that use a consumable electrode include shielded metal arc welding, where a coated metal electrode is manually held to create an arc and weld pool. Gas tungsten arc welding uses a non-consumable tungsten electrode and filler wire to produce welds. The document also covers plasma arc welding and other joining techniques.
Welding defects
This document discusses various welding defects such as slag inclusion, undercut, porosity, incomplete fusion, overlap, underfill, spatter, excessive convexity, incomplete penetration, and excessive penetration. It provides the causes and ways to prevent or repair each defect. Nondestructive and destructive testing methods for inspecting welds are also summarized, including visual inspection, ultrasonic testing, radiographic testing, dye penetrant testing, magnetic particle testing, and mechanical tests.
Fsw optimization for dissimilar aluminium alloys (Presentation)
This dissertation examines the parametric optimization of friction stir welding (FSW) when joining dissimilar aluminum alloys. The document outlines the methodology, which includes: selecting critical welding parameters; designing experiments using a fractional factorial design of experiments approach in Minitab; conducting FSW experiments; analyzing tensile strength and hardness results; and developing mathematical models. Regression analysis identified tool tip plunge depth, shoulder diameter, tilt angle, and tool shape as significant parameters. Interactions between parameters also influenced weld strength. The study aims to optimize FSW of dissimilar aluminum alloys for applications like shipbuilding and aerospace.
Effects and defects of the polypropylene plate for different parameters in fr...
Effects and defects of the polypropylene plate for different parameters in fr...eSAT Publishing House
1. The document analyzes the effects of different parameters on friction stir welding of polypropylene plates, including tool pin profile, rotational speed, and welding speed.
2. Microstructural images and hardness tests were used to evaluate the quality of the welds under different conditions.
3. The results showed that a threaded pin profile with rotational speed of 2250 rpm and welding speed of 40-50 mm/min produced welds with the fewest defects in the polypropylene material.Mfg tooling 04 cutting tool design
This document discusses cutting tool materials and their properties. It covers various tool materials including carbon steels, high-speed steel, cemented carbides, ceramics, and diamond. Cemented carbides are the most commonly used and contain tungsten carbide and a cobalt binder. The document provides details on selecting cutting tool materials based on the application, and guidelines for cutting tool design including tool angles and operating conditions.
What's hot (20)
Marketing Strategy for a Steel Manufacturing Company
Marketing Strategy for a Steel Manufacturing Company
Unisteels & Engineering Company Private Limited, Mumbai, Ferrous and Non Ferr...
Unisteels & Engineering Company Private Limited, Mumbai, Ferrous and Non Ferr...
Weld Defects and Material Properties - Presentation
Weld Defects and Material Properties - Presentation
Friction stir welding of high strength aluminium alloys
Friction stir welding of high strength aluminium alloys
ACE305: Aircraft Components Design and Manufacture
ACE305: Aircraft Components Design and Manufacture
Fsw optimization for dissimilar aluminium alloys (Presentation)
Fsw optimization for dissimilar aluminium alloys (Presentation)
Effects and defects of the polypropylene plate for different parameters in fr...
Effects and defects of the polypropylene plate for different parameters in fr...
Similar to Contract finish 1
Tap and Faucet Casting
This document explores material and casting process options for manufacturing a hypothetical tap and faucet design. It considers stainless steel, copper, brass, and aluminum alloys as potential materials. Brass is selected due to its corrosion resistance, machinability, ability to be plated, and cost effectiveness. The permanent mould casting process is chosen as it produces a smooth finish at low cost while allowing high production volumes without die replacement. This process and DCB3 die casting brass meet the design requirements of affordability, quality, lifespan, and production timelines for the mid-market brand.
Competent aluminium die casting producer in china
This document summarizes the services of an aluminum die throwing provider in China. They offer precision machining services including CNC milling, lathe work, and die throwing for prototype and mass production parts made of materials like aluminum, copper, steel, and magnesium alloys. They also provide anodizing services. They aim to be a reliable partner for OEM and ODM manufacturers in the metal die casting industry.
Educational Presentation High Performance Metals
Stainless steel is a highly durable and sustainable material that offers significant lifecycle cost savings compared to other metals due to its corrosion resistance and low maintenance needs. It can last the entire lifespan of a building with little to no upkeep and is fully recyclable. Specifying stainless steel can help contribute to LEED certification points and green building standards due to its environmental benefits. The document provides information on stainless steel grades, fabrication, finishes, examples of architectural applications, and corrosion resistance testing to help designers understand why it is a smart choice for their projects.
ZOLLERN COMPANY PROFILE IMAGE PRODUCT DIVISIONS Z512
The document describes the various product divisions of ZOLLERN Group, an internationally successful supplier of high-tech parts and systems. It discusses their drive systems, castings, machine components, plain bearings, steel profiles, and other products. ZOLLERN supplies parts for applications in aerospace, shipbuilding, energy, vehicles, and more. It has developed from a simple ironworks 300 years ago into an ultra-modern company with over 3000 employees worldwide. ZOLLERN is known for quality, reliability, and engineering expertise.
The Comprehensive Guide to Brass Fasteners: Selection, Application, and Benefits
This comprehensive guide provides detailed insights on brass fastener types, properties, selection factors, applications, and benefits to inform your product choices. Visit : https://vebrass.com/comprehensive-guide-brass-fasteners-selection-application-benefits/
Cutting tools chap_1_7225
This document discusses different types of cutting tool materials. It begins by introducing the importance of selecting the right material for the application. High carbon steel and high-speed steel were early materials but have limitations. Modern materials include cemented tungsten carbide, ceramics, and coatings. Each material has different properties like hardness, toughness, wear resistance, and temperature performance that make it suitable for specific cutting applications. Selecting the optimal material involves balancing quality, cost and tool life.
Ls pipe blast brochure 2013
LS industries builds a pipe blaster to fit large or small applications. Contact me for more information. We can build machines for sizes from 1- 144" ID or OD.
Tim Ens
LS pipe blast ebrochure 0613 rev 2
LS Industries has been designing and building custom pipe cleaning systems since 1977. They offer a full range of internal and external pipe blasting systems, and pride themselves on providing complete customer support. Their pipe blasting systems use a Turboshot impeller design to ensure maximum coverage with steel shot, and can accommodate pipe sizes from 2 1/8 inches to over 96 inches. LS Industries works closely with customers to customize solutions that meet their specific metal cleaning needs.
Bearing Steel Grit & Cr Alloy Steel Shot( DUOLENG) 2015
This document provides information about a company that produces bearing steel grit and chromium alloy steel shot. It discusses the company's history, certifications, production processes, quality control procedures, applications, and customer references. Contact information is also provided. The key points are that the company has been producing these abrasive materials since 1988, uses unique production methods, and their products have been used successfully in a variety of industries by over 50 countries.
Cement
Wear-Concepts provides wear-resistant products and services to reduce downtime and maintenance costs for industries like cement, mining, and manufacturing. They offer a variety of wear plates, overlays, panels, pipes, and ceramics, as well as field services and engineering support. As a global leader established in 1996, Wear-Concepts aims to respond to customers' changing needs with reliable performance, service, and dependability.
Steel Channel Bending Services - Plate Cutting Company
Browning Enterprises Inc. is a Plate Cutting, Steel Channel Bending, Steel Fabrication Processing company, capable of providing commercial steel building fabrication as per its client specifications.
Steel Processing & Fabrication Company
Browning Enterprise, a highly experienced, professional, and progressive Plate Cutting Company, was started in 1988 to fulfill the growing demands of steelwork in the southern United States. Browning has robust steel processing and manufacturing capabilities that allow them to take the most challenging tasks and assuring completion on time with 100% accuracy.
Wear parts for impact crusher-20221121.pdf
The document discusses wear parts solutions for impact crushers from Sunwill Machinery, including MMC (Ceramic Embedded) and Bimetallic technologies to improve wear performance and reduce downtime. These technologies are applied to blow bars, impact plates, side liners, and rotor protection liners. The document provides details on material types for different wear parts and applications to maximize wear life.
Dixon Fittings from Project Sales Corp
The document is an email from Project Sales Corp promoting Dixon Hose Fittings and Accessories. It summarizes Dixon's wide range of hose fittings for industries like oil & gas, including air fittings, cam & groove couplings, and suction/delivery couplings. These products are manufactured to stringent standards and help ensure safety. The email provides details on Dixon's air fittings, cam & groove couplings, and suction/delivery product lines. It notes that most Dixon products can be delivered within 7 days.
COMPANY PROFILE 2
MRCEngineering provides various engineering services including fabrication, precision machining, cutting steel to size, sandblasting, hydraulics, plant maintenance, and equipment hire. It was founded in 1996 in Richards Bay, South Africa and began operations in Mozambique in 2003. The company aims to be the best through superior service, quality, timely work, and commitment to customer satisfaction. It offers an array of industrial engineering services under one roof for affordable prices.
COMPANY PROFILE 2
MRCEngineering provides various engineering services including fabrication, precision machining, cutting steel to size, sandblasting, hydraulics, plant maintenance, and equipment hire. It was founded in 1996 in Richards Bay, South Africa and began operations in Mozambique in 2003. The company aims to be the best through superior service, quality, timely work, and commitment to customer satisfaction. It offers an array of industrial engineering services under one roof for affordable prices.
2016 Installations Maintenance
Chrisnel provides installation, maintenance, fabrication, and repair services for structural steel and other industrial equipment. They have senior engineers and experienced field staff available to solve any problems and perform maintenance. Chrisnel aims to be a total solutions provider that works closely with customers from project conception through after sales support to ensure systems are back up and running promptly without long downtimes.
RCC-.pdf
The document discusses principles and concepts related to reinforced cement concrete (RCC). It describes RCC as concrete in which steel reinforcement is embedded to take tensile stresses. The steel is generally round bars of diameters between 6mm to 32mm. RCC is equally strong in tension, compression, and shear. It also discusses RCC mix proportions, uses of RCC in foundations, beams, slabs etc., load transfer, mixing of concrete, formwork, curing and stripping times.
LIGHT GAUGE STEEL STRUCTURE
Chopra Aluminium provides metal building services and introduces a new light gauge framing system using galvanized steel that allows for prefabricated, modular construction. The system uses computer software and machinery to automatically cut, form, and label framing components that assemble like a puzzle to create buildings efficiently with precise dimensions and minimal on-site labor.
Corrosion1
Corrosion Protection Engineers India provides high quality engineering services for corrosion protection including surface preparation, spray galvanizing, aluminizing, sealants, and stress relieving. It offers abrasive blasting for surface preparation prior to applying protective coatings and uses spray coating to project molten zinc or aluminum onto blasted steel surfaces. All of its coating processes are tested to adhere to industry standards.
Similar to Contract finish 1 (20)
ZOLLERN COMPANY PROFILE IMAGE PRODUCT DIVISIONS Z512
ZOLLERN COMPANY PROFILE IMAGE PRODUCT DIVISIONS Z512
The Comprehensive Guide to Brass Fasteners: Selection, Application, and Benefits
The Comprehensive Guide to Brass Fasteners: Selection, Application, and Benefits
Bearing Steel Grit & Cr Alloy Steel Shot( DUOLENG) 2015
Bearing Steel Grit & Cr Alloy Steel Shot( DUOLENG) 2015
Steel Channel Bending Services - Plate Cutting Company
Steel Channel Bending Services - Plate Cutting Company
More from Dave Davidson
MFI Mass Finishing Equipment and Media
Centrifugal Iso-Finishing is a high-speed, high-quality and hands-free method for deburring, smoothing, surface-0finishing, burnishing and polishing of work-pieces and parts. Contact Dave Davidson for additional technical information and assistance with getting your parts sample finished. Contact me at ddavidson@deburring-tech-group.com See also dryfinish.wordpress.com
Centrifugal Iso-Finishing
Technical article reprint on the high-speed and high-intensity and high-quality Centrifugal iso-Finishing method.. The methods used widely on aerospace, motorsports, automotive, medical, dental, orthodontic and jewelry manufactured parts. For additional information contact Dave Davidson at ddavidson@deburring-tech-group.com. Ask about the free sample part finishing program.
See also the technical blog at https://dryfinish.wordpress.com
Modern machine-shop-apr-18 centrifugal isofinishing crnakshafts
See the technical article on Centrifugal Iso-Finishing on surface finish and it's effect on engine components in the Motorsports Industry terms of performance improvement.
Contact D. A. (Dave) Davidson at ddavidson@deburring-tech-group.com for additional information or help with free sample finishing.
Centrifugal Iso-Finishing Technical article as seen in Products Finishing mag...
Centrifugal iso-finishing is a high-speed mass finishing method that can produce very refined surface finishes on parts in short cycle times. It can be used for deburring, contouring edges, and developing surface finishes that improve part performance, integrity, and lifespan. Centrifugal iso-finishing involves processing parts with abrasives or polishing materials under high surface pressure to truncate peaks and create uniformly compressed stresses in the surface. This improves part wear resistance, fatigue resistance, and ability to withstand repeated stresses compared to surfaces finished by conventional methods.
Iso-Finishing sample part finishing application form
Free sample part processing and quotations for deburring, finishing or polishing of your production parts.
(1) Download the Word document form into your computer.
(2) Complete the form and include a paper copy with your sample parts to being shipped to the Isofinishing address shown on the form
MFI full finishing product catalog with technical assistance info
Mass Finishing Equipment and Supply Catalog includes equipment, finishing media, supplies and accessories. Features Centrifugal Iso-Finishing equipment for high-speed and hands-free deburring, finishing and polishing. For technical assistance and help with arranging for free sample finishing of your parts contact Dave Dagvidson at ddavidson@deburring-tech-group.com
It's the Finish that Counts. Technical Magazine article reprint.
A conventionally produced surface (turned, milled,
ground, EDM) is typically Gaussian in nature, that is,
the peak and valley distribution is pretty much equal
in height. This type of surface can be very unstable and
unpredictable when wear and load bearing are considered. The images in Figure 1 demonstrate this type of
surface.
There are many ways to produce plateaued surfaces.
They are varied in approach but all have the ability to
control the surface peak characteristics separately for
the valley characteristics. Methods that are used to improve surfaces for performance and increased service life include centrifugal barrel finishing, turbo-abrasive machining (aka Turbo-Finish) and isotropic micro-finishing with vibratory finishing equipment. For additional technical information and/or elp with free sample part processing contact Dave Davidson at ddavidson@deburring-tech-group.om
Gear Finishing Technical Intewrview
Modern machine shop interviews Dave Davidson about Gear finishing processes. For additional technical information and assistance with sample part finishing contact Dave Davidson | ddavidson@deburring-tech-group.com # #machining #polishing #finish #cnc #manufacturingengineering #automotiveindustry #finishing #deburring #leanmanufacturing #aerospace #massfinishing #grinding #automotive #leanmaufacturing #gears
BV PRODUCTS - Bowl and Tub Vibratory Finishing Systems
Vibratory finishing machines designed, engineered and built-in Australia that out-perform and out-last vibratory finishing machines costing much more.
Robust design with direct-drive motor and integrated parts/media separation for economical vibratory finishing of metal parts. BV Products has been perfecting its unique all cast polyurethane vibratory finishing machines with direct-drive motion generators for almost 40 years to make them the most innovative and most cost-effective surface finishing solution in the industry. Contact Dave Davidson: ddavidson@deburring-tech-group.com
BV PRODUCTS VIBRATORY FINISHING SYSTEMS FOR DEBURRING AND FINISHING
Vibratory finishing machines designed, engineered and built-in Australia that out-perform and out-last vibratory finishing machines costing much more.
Robust design with direct-drive motor and integrated parts/media separation for economical vibratory finishing of metal parts. BV Products has been perfecting its unique all cast polyurethane vibratory finishing machines with direct-drive motion generators for almost 40 years to make them the most innovative and most cost-effective surface finishing solution in the industry. Contact Dave Davidson: ddavidson@deburring-tech-group.com
BV Products - Vibratory Finishing machinery for deburring and polishing
Vibratory finishing machines designed, engineered and built-in Australia that out-perform and out-last vibratory finishing machines costing much more.
Robust design with direct-drive motor and integrated parts/media separation for economical vibratory finishing of metal parts. BV Products has been perfecting its unique all cast polyurethane vibratory finishing machines with direct-drive motion generators for almost 40 years to make them the most innovative and most cost-effective surface finishing solution in the industry. Contact Dave Davidson: ddavidson@deburring-tech-group.com
BV Products TECHNOVIBE Series
Vibratory finishing machines designed, engineered and built in Australia that out-perform and out-last vibratory finishing machines costing much more. Robust design with direct-drive motor and integrated parts/media separation for economical vibratory finishing of metal parts. BV Products has been perfecting its unique all cast polyurethane vibratory finishing machines with direct-drive motion generators for almost 40 years to make them the most innovative and most cost-effective surface finishing solution in the industry. Contact Dave Davidson: ddavidson@deburring-tech-group.com
Centrifugal Iso-Finishing for Additive Manufactured Parts
Centrifugal Iso-Finishing Technology is used on 3D Printed and conventional CNC precision machined components for deburring, finishing and polishing. It is a high-speed, high-quality hands-free finishing method that produces highly refined surface finishes in a fraction of the time required by other equipment (10 times faster, in many cases) Free sample finishing of your parts is available, contact Dave Davidson at ddavidson@deburring-tech-group.com
Centrifugal iso finishing sample processing
High-Speed, Hands-free deburring, iso-finishing and polishing of manufactured and 3D printed parts. Contact Dave Davidson for free sample finishing, technical assistance and contract deburring and iso-finish polishing at dryfinish@gmail.com | https://dryfinish.wixsite.com/iso-finish https://lnkd.in/gFjetZk
Centrifugal iso finishing contract services
High-Speed, Hands-free deburring, iso-finishing and polishing of manufactured and 3D printed parts. Contact Dave Davidson for free sample finishing, technical assistance and contract deburring and iso-finish polishing at dryfinish@gmail.com | https://dryfinish.wixsite.com/iso-finish https://lnkd.in/gFjetZk
Centrifugal iso-Finishing 3D parts
This document discusses high-speed post-processing of 3D printed parts using centrifugal iso-finishing to speed up workflows and reduce bottlenecks. It invites contacting the sender to arrange running sample parts through their free surface finishing program to see how it improves the process.
Centrifugal iso finishing - part dividers
High-Speed, Hands-free deburring, iso-finishing and polishing of manufactured and 3D printed parts. Contact Dave Davidson for free sample finishing, technical assistance and contract deburring and iso-finish polishing at dryfinish@gmail.com | https://dryfinish.wixsite.com/iso-finish https://lnkd.in/gFjetZk
Final vibratory iso-finishing processes
High-Speed iso-finishing and polishing of manufactured and 3D printed parts. Contact Dave Davidson for free sample finishing, technical assistance and contract deburring and iso-finish polishing at dryfinish@gmail.com | https://dryfinish.wixsite.com/iso-finish https://lnkd.in/gFjetZk
Centrifugal Iso-Finishing Equipment
High-Speed, Hands-free deburring, iso-finishing and polishing of manufactured and 3D printed parts. Contact Dave Davidson for free sample finishing, technical assistance and contract deburring and iso-finish polishing at dryfinish@gmail.com | https://dryfinish.wixsite.com/iso-finish https://lnkd.in/gFjetZk
Centrifugal iso finishing - Equipment description
High-Speed, Hands-free deburring, iso-finishing and polishing of manufactured and 3D printed parts. Contact Dave Davidson for free sample finishing, technical assistance and contract deburring and iso-finish polishing at dryfinish@gmail.com | https://dryfinish.wixsite.com/iso-finish
https://lnkd.in/gFjetZk
More from Dave Davidson (20)
Modern machine-shop-apr-18 centrifugal isofinishing crnakshafts
Modern machine-shop-apr-18 centrifugal isofinishing crnakshafts
Centrifugal Iso-Finishing Technical article as seen in Products Finishing mag...
Centrifugal Iso-Finishing Technical article as seen in Products Finishing mag...
Iso-Finishing sample part finishing application form
Iso-Finishing sample part finishing application form
MFI full finishing product catalog with technical assistance info
MFI full finishing product catalog with technical assistance info
It's the Finish that Counts. Technical Magazine article reprint.
It's the Finish that Counts. Technical Magazine article reprint.
BV PRODUCTS - Bowl and Tub Vibratory Finishing Systems
BV PRODUCTS - Bowl and Tub Vibratory Finishing Systems
BV PRODUCTS VIBRATORY FINISHING SYSTEMS FOR DEBURRING AND FINISHING
BV PRODUCTS VIBRATORY FINISHING SYSTEMS FOR DEBURRING AND FINISHING
BV Products - Vibratory Finishing machinery for deburring and polishing
BV Products - Vibratory Finishing machinery for deburring and polishing
Centrifugal Iso-Finishing for Additive Manufactured Parts
Centrifugal Iso-Finishing for Additive Manufactured Parts
Recently uploaded
Blood finder application project report (1).pdf
Blood Finder is an emergency time app where a user can search for the blood banks as
well as the registered blood donors around Mumbai. This application also provide an
opportunity for the user of this application to become a registered donor for this user have
to enroll for the donor request from the application itself. If the admin wish to make user
a registered donor, with some of the formalities with the organization it can be done.
Specialization of this application is that the user will not have to register on sign-in for
searching the blood banks and blood donors it can be just done by installing the
application to the mobile.
The purpose of making this application is to save the user’s time for searching blood of
needed blood group during the time of the emergency.
This is an android application developed in Java and XML with the connectivity of
SQLite database. This application will provide most of basic functionality required for an
emergency time application. All the details of Blood banks and Blood donors are stored
in the database i.e. SQLite.
This application allowed the user to get all the information regarding blood banks and
blood donors such as Name, Number, Address, Blood Group, rather than searching it on
the different websites and wasting the precious time. This application is effective and
user friendly.
一比一原版(爱大毕业证书)爱荷华大学毕业证如何办理
原版一模一样【微信：741003700 】【(爱大毕业证书)爱荷华大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Digital Twins Computer Networking Paper Presentation.pptx
A Digital Twin in computer networking is a virtual representation of a physical network, used to simulate, analyze, and optimize network performance and reliability. It leverages real-time data to enhance network management, predict issues, and improve decision-making processes.
Mechanical Engineering on AAI Summer Training Report-003.pdf
Mechanical Engineering PROJECT REPORT ON SUMMER VOCATIONAL TRAINING
AT MBB AIRPORT
Supermarket Management System Project Report.pdf
Supermarket management is a stand-alone J2EE using Eclipse Juno program.
This project contains all the necessary required information about maintaining
the supermarket billing system.
The core idea of this project to minimize the paper work and centralize the
data. Here all the communication is taken in secure manner. That is, in this
application the information will be stored in client itself. For further security the
data base is stored in the back-end oracle and so no intruders can access it.
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
Energy efficiency has been important since the latter part of the last century. The main object of this survey is to determine the energy efficiency knowledge among consumers. Two separate districts in Bangladesh are selected to conduct the survey on households and showrooms about the energy and seller also. The survey uses the data to find some regression equations from which it is easy to predict energy efficiency knowledge. The data is analyzed and calculated based on five important criteria. The initial target was to find some factors that help predict a person's energy efficiency knowledge. From the survey, it is found that the energy efficiency awareness among the people of our country is very low. Relationships between household energy use behaviors are estimated using a unique dataset of about 40 households and 20 showrooms in Bangladesh's Chapainawabganj and Bagerhat districts. Knowledge of energy consumption and energy efficiency technology options is found to be associated with household use of energy conservation practices. Household characteristics also influence household energy use behavior. Younger household cohorts are more likely to adopt energy-efficient technologies and energy conservation practices and place primary importance on energy saving for environmental reasons. Education also influences attitudes toward energy conservation in Bangladesh. Low-education households indicate they primarily save electricity for the environment while high-education households indicate they are motivated by environmental concerns.
Null Bangalore | Pentesters Approach to AWS IAM
#Abstract:
- Learn more about the real-world methods for auditing AWS IAM (Identity and Access Management) as a pentester. So let us proceed with a brief discussion of IAM as well as some typical misconfigurations and their potential exploits in order to reinforce the understanding of IAM security best practices.
- Gain actionable insights into AWS IAM policies and roles, using hands on approach.
#Prerequisites:
- Basic understanding of AWS services and architecture
- Familiarity with cloud security concepts
- Experience using the AWS Management Console or AWS CLI.
- For hands on lab create account on [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
# Scenario Covered:
- Basics of IAM in AWS
- Implementing IAM Policies with Least Privilege to Manage S3 Bucket
- Objective: Create an S3 bucket with least privilege IAM policy and validate access.
- Steps:
- Create S3 bucket.
- Attach least privilege policy to IAM user.
- Validate access.
- Exploiting IAM PassRole Misconfiguration
-Allows a user to pass a specific IAM role to an AWS service (ec2), typically used for service access delegation. Then exploit PassRole Misconfiguration granting unauthorized access to sensitive resources.
- Objective: Demonstrate how a PassRole misconfiguration can grant unauthorized access.
- Steps:
- Allow user to pass IAM role to EC2.
- Exploit misconfiguration for unauthorized access.
- Access sensitive resources.
- Exploiting IAM AssumeRole Misconfiguration with Overly Permissive Role
- An overly permissive IAM role configuration can lead to privilege escalation by creating a role with administrative privileges and allow a user to assume this role.
- Objective: Show how overly permissive IAM roles can lead to privilege escalation.
- Steps:
- Create role with administrative privileges.
- Allow user to assume the role.
- Perform administrative actions.
- Differentiation between PassRole vs AssumeRole
Try at [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Sinan from the Delivery Hero mobile infrastructure engineering team shares a deep dive into performance acceleration with Gradle build cache optimizations. Sinan shares their journey into solving complex build-cache problems that affect Gradle builds. By understanding the challenges and solutions found in our journey, we aim to demonstrate the possibilities for faster builds. The case study reveals how overlapping outputs and cache misconfigurations led to significant increases in build times, especially as the project scaled up with numerous modules using Paparazzi tests. The journey from diagnosing to defeating cache issues offers invaluable lessons on maintaining cache integrity without sacrificing functionality.
一比一原版(osu毕业证书)美国俄勒冈州立大学毕业证如何办理
原版一模一样【微信：741003700 】【(osu毕业证书)美国俄勒冈州立大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Call For Paper -3rd International Conference on Artificial Intelligence Advan...
* Registration is currently open *
Call for Research Papers!!!
Free – Extended Paper will be published as free of cost.
3rd International Conference on Artificial Intelligence Advances (AIAD 2024)
July 13 ~ 14, 2024, Virtual Conference
Webpage URL: https://aiad2024.org/index
Submission Deadline: June 22, 2024
Submission System URL:
https://aiad2024.org/submission/index.php
Contact Us:
Here's where you can reach us : aiad@aiad2024.org (or) aiadconference@yahoo.com
WikiCFP URL: http://wikicfp.com/cfp/servlet/event.showcfp?eventid=180509©ownerid=171656
#artificialintelligence #softcomputing #machinelearning #technology #datascience #python #deeplearning #tech #robotics #innovation #bigdata #coding #iot #computerscience #data #dataanalytics #engineering #robot #datascientist #software #automation #analytics #ml #pythonprogramming #programmer #digitaltransformation #developer #promptengineering #generativeai #genai #chatgpt #artificial #intelligence #datamining #networkscommunications #robotics #callforsubmission #submissionsopen #deadline #opencall #virtual #conference
Software Engineering and Project Management - Introduction, Modeling Concepts...
Introduction, Modeling Concepts and Class Modeling: What is Object orientation? What is OO development? OO Themes; Evidence for usefulness of OO development; OO modeling history. Modeling
as Design technique: Modeling, abstraction, The Three models. Class Modeling: Object and Class Concept, Link and associations concepts, Generalization and Inheritance, A sample class model, Navigation of class models, and UML diagrams
Building the Analysis Models: Requirement Analysis, Analysis Model Approaches, Data modeling Concepts, Object Oriented Analysis, Scenario-Based Modeling, Flow-Oriented Modeling, class Based Modeling, Creating a Behavioral Model.
Open Channel Flow: fluid flow with a free surface
Open Channel Flow: This topic focuses on fluid flow with a free surface, such as in rivers, canals, and drainage ditches. Key concepts include the classification of flow types (steady vs. unsteady, uniform vs. non-uniform), hydraulic radius, flow resistance, Manning's equation, critical flow conditions, and energy and momentum principles. It also covers flow measurement techniques, gradually varied flow analysis, and the design of open channels. Understanding these principles is vital for effective water resource management and engineering applications.
Recently uploaded (20)
Digital Twins Computer Networking Paper Presentation.pptx
Digital Twins Computer Networking Paper Presentation.pptx
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
Mechanical Engineering on AAI Summer Training Report-003.pdf
Mechanical Engineering on AAI Summer Training Report-003.pdf
2. protection of river banks and bed erosion protection works.ppt
2. protection of river banks and bed erosion protection works.ppt
5G Radio Network Througput Problem Analysis HCIA.pdf
5G Radio Network Througput Problem Analysis HCIA.pdf
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
SENTIMENT ANALYSIS ON PPT AND Project template_.pptx
SENTIMENT ANALYSIS ON PPT AND Project template_.pptx
Call For Paper -3rd International Conference on Artificial Intelligence Advan...
Call For Paper -3rd International Conference on Artificial Intelligence Advan...
Software Engineering and Project Management - Introduction, Modeling Concepts...
Software Engineering and Project Management - Introduction, Modeling Concepts...
Contract finish 1
- 1. Machined Brass Coupling Many of today’s plumbing and industrial fluid transfer fittings are made from variety of brass and bronze alloys. Used primarily for their corrosion resistance, these copper alloys are also ideal materials for polishing, clear coating and chrome plating. For this pro- ject, we started with a 1.25” dia x 3” long precision machined fitting. We cut and polished the part, removing all of the tooling marks and machining burrs to prepare it for chrome plating. Cast and Machined Alloy Steel Handgun Slides Many of todays’ firearms are manufactured by machining components produced by the investment casting or injection molding process. Parts produced by either means still require finishing to remove burrs and improve the surface quality. For these 1” x 1” x 8” high performance alloy steel handgun slides we combined the appropriate cutting and polishing media to provide the pre- plating finish required. CONTRACT FINISHING and POLISHINGCase Studies and Applications — Free Sample Processing and Expert Analysis Available CONTACT: Dave Davidson | Deburring Specialist | dryfinish@gmail.com | 509.230.6821 | http://dryfinish.wordpress.com