the TCP/IP protocol suite involves several methods that enables communication of which IP addressing is one of those pertinent subjects that must be considered if communication must be successful.
I want to increase ease in IT field.It is an easy concept of IP(internet protocol) Address. It is specially for IT students.But it is very simple presentation that is also for students of other fields and understandable for them.
the above ppt will provide info about ip addresses in a more practical way covering all the below mentioned topics
1. Network layer.
2. Elements of communication
3. What is ip address and its need
4. Ip address types
5. History
6. Structure of ip address
7. Public and private ips
8. Classes
9. Ip Address distribution
10. IPV6
This presentation gives a brief description about IP Address (Internet protocol address), Classes of IPv4. And also included, what is IPv4 and what is IPv6.
http://www.ip-location.khozz.com
To locate the location of the internet users IP address plays an important role. Various types of IP address are categorized for the easy network uses. Class A, Class B, Class C, Class D and Class E used to identify location of the users.
IP Address is a unique identification given to Host, network device, server for data communication. IP
Address stand for Internet Protocol address, it is an addressing scheme used to identify a system on a
network. It is a unique address that certain electronic devices currently use to communicate with each
other on a network using internet protocol.
I want to increase ease in IT field.It is an easy concept of IP(internet protocol) Address. It is specially for IT students.But it is very simple presentation that is also for students of other fields and understandable for them.
the above ppt will provide info about ip addresses in a more practical way covering all the below mentioned topics
1. Network layer.
2. Elements of communication
3. What is ip address and its need
4. Ip address types
5. History
6. Structure of ip address
7. Public and private ips
8. Classes
9. Ip Address distribution
10. IPV6
This presentation gives a brief description about IP Address (Internet protocol address), Classes of IPv4. And also included, what is IPv4 and what is IPv6.
http://www.ip-location.khozz.com
To locate the location of the internet users IP address plays an important role. Various types of IP address are categorized for the easy network uses. Class A, Class B, Class C, Class D and Class E used to identify location of the users.
IP Address is a unique identification given to Host, network device, server for data communication. IP
Address stand for Internet Protocol address, it is an addressing scheme used to identify a system on a
network. It is a unique address that certain electronic devices currently use to communicate with each
other on a network using internet protocol.
This is my work it is very good ppt ic yiu read this book you will get better knowledge about computer system I am a fresh electrical engineering graduate from Gondar university Institute of electrical and computer engineering intending to continue my development as communication engineer. In terms of results and objectives, I am enthusiastic and hard working. I am mature enough for the position because I have taken the basic communication engineering courses such as introduction to communication system , digital communication system, advanced computer system, switching and intelligent network ,
Electrical power system ,electrical work shop I,&II ,electrical lab 1,2,3,4, programing course math lab++,java, assembly language, introduction to control system, digital signal processing, signal and system analysis ,fundamental of electrical circuit, electrical measurement ,embedded system, I am familiar with cisco configuration,multism.organized a team of four students for thesis project
Projects
a four-month internship experience on antenna design for Ethio telecom
a six-month thesis project experience on performance analysis of aquastic echo cancellation in teleconference
semester project FM transmitter practically
university network design using sisco
online shopping using graphical user interface
other mini project such as QAM,error detection and correction using humming algorism Transcripts are records of students’ academic performance. They are the most valuable private
and sensitive documents. Utmost care is taken in their recording, storing and issuance. The
following is a set of regulation governing issuance of transcripts.
a. No student records are shown or given to a third party without the written
consent of the student. The University College may make discretionary
exceptions to this.
b. No transcripts will be issued for requests made through third parties ,that is
representatives, friends or relatives, agencies, etc. in exceptional cases
transcripts are given to third parties if the third party meets the following
conditions :
i.
The third party must carry a power of attorney;
ii. The third party does not demand that the transcripts be given to him/her;
iii. The third party must sign an affidavit to the effect that it assumes full
responsibilities for any disputes arising from the possibility that the
Registrar’s office is misled into sending transcripts to persons who have
no legal claims over the document.
c. All students who have dropped out, withdrawn or graduated from the
University College must present an official clearance sheet to get
transcripts and other services. Third parties of such students must present
clearance sheets of students they represent. The official clearance form or its
equivalent clears the students from all their financial and other obligations to
the University College.
d. Transcripts given by the Registrar Office are of two kinds: student copy and
official copy. The student copy is a trans
The IP addresses used to identify systems on a TCP/IP network. The IP address is an absolute identifier of both the individual machine and the network on which it resides.
Every IP datagram packet transmitted over a TCP/IP network contains the IP addresses of the source system that generated it and the destination system for which it’s intended in its IP header.
Subnetting of IPv4 ip address that help you to solve every type of ip address with any one of the class you want to subnet,and have a basic introduction of IPv6 ,and why, Ipv5 is not used.
Using Python library such as numpy, scipy and pandas to carry out supervised learning operations like Support vector machine, decision tree and K-nearest neighbor.
Data sciences is the topnotch in our world now as it enables us to predict the future and behaviors of people and systems alike.
Hence, this course focuses on introducing the processing involved in data sciences.
State of ICS and IoT Cyber Threat Landscape Report 2024 previewPrayukth K V
The IoT and OT threat landscape report has been prepared by the Threat Research Team at Sectrio using data from Sectrio, cyber threat intelligence farming facilities spread across over 85 cities around the world. In addition, Sectrio also runs AI-based advanced threat and payload engagement facilities that serve as sinks to attract and engage sophisticated threat actors, and newer malware including new variants and latent threats that are at an earlier stage of development.
The latest edition of the OT/ICS and IoT security Threat Landscape Report 2024 also covers:
State of global ICS asset and network exposure
Sectoral targets and attacks as well as the cost of ransom
Global APT activity, AI usage, actor and tactic profiles, and implications
Rise in volumes of AI-powered cyberattacks
Major cyber events in 2024
Malware and malicious payload trends
Cyberattack types and targets
Vulnerability exploit attempts on CVEs
Attacks on counties – USA
Expansion of bot farms – how, where, and why
In-depth analysis of the cyber threat landscape across North America, South America, Europe, APAC, and the Middle East
Why are attacks on smart factories rising?
Cyber risk predictions
Axis of attacks – Europe
Systemic attacks in the Middle East
Download the full report from here:
https://sectrio.com/resources/ot-threat-landscape-reports/sectrio-releases-ot-ics-and-iot-security-threat-landscape-report-2024/
LF Energy Webinar: Electrical Grid Modelling and Simulation Through PowSyBl -...DanBrown980551
Do you want to learn how to model and simulate an electrical network from scratch in under an hour?
Then welcome to this PowSyBl workshop, hosted by Rte, the French Transmission System Operator (TSO)!
During the webinar, you will discover the PowSyBl ecosystem as well as handle and study an electrical network through an interactive Python notebook.
PowSyBl is an open source project hosted by LF Energy, which offers a comprehensive set of features for electrical grid modelling and simulation. Among other advanced features, PowSyBl provides:
- A fully editable and extendable library for grid component modelling;
- Visualization tools to display your network;
- Grid simulation tools, such as power flows, security analyses (with or without remedial actions) and sensitivity analyses;
The framework is mostly written in Java, with a Python binding so that Python developers can access PowSyBl functionalities as well.
What you will learn during the webinar:
- For beginners: discover PowSyBl's functionalities through a quick general presentation and the notebook, without needing any expert coding skills;
- For advanced developers: master the skills to efficiently apply PowSyBl functionalities to your real-world scenarios.
DevOps and Testing slides at DASA ConnectKari Kakkonen
My and Rik Marselis slides at 30.5.2024 DASA Connect conference. We discuss about what is testing, then what is agile testing and finally what is Testing in DevOps. Finally we had lovely workshop with the participants trying to find out different ways to think about quality and testing in different parts of the DevOps infinity loop.
"Impact of front-end architecture on development cost", Viktor TurskyiFwdays
I have heard many times that architecture is not important for the front-end. Also, many times I have seen how developers implement features on the front-end just following the standard rules for a framework and think that this is enough to successfully launch the project, and then the project fails. How to prevent this and what approach to choose? I have launched dozens of complex projects and during the talk we will analyze which approaches have worked for me and which have not.
Smart TV Buyer Insights Survey 2024 by 91mobiles.pdf91mobiles
91mobiles recently conducted a Smart TV Buyer Insights Survey in which we asked over 3,000 respondents about the TV they own, aspects they look at on a new TV, and their TV buying preferences.
The Art of the Pitch: WordPress Relationships and SalesLaura Byrne
Clients don’t know what they don’t know. What web solutions are right for them? How does WordPress come into the picture? How do you make sure you understand scope and timeline? What do you do if sometime changes?
All these questions and more will be explored as we talk about matching clients’ needs with what your agency offers without pulling teeth or pulling your hair out. Practical tips, and strategies for successful relationship building that leads to closing the deal.
Neuro-symbolic is not enough, we need neuro-*semantic*Frank van Harmelen
Neuro-symbolic (NeSy) AI is on the rise. However, simply machine learning on just any symbolic structure is not sufficient to really harvest the gains of NeSy. These will only be gained when the symbolic structures have an actual semantics. I give an operational definition of semantics as “predictable inference”.
All of this illustrated with link prediction over knowledge graphs, but the argument is general.
UiPath Test Automation using UiPath Test Suite series, part 4DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 4. In this session, we will cover Test Manager overview along with SAP heatmap.
The UiPath Test Manager overview with SAP heatmap webinar offers a concise yet comprehensive exploration of the role of a Test Manager within SAP environments, coupled with the utilization of heatmaps for effective testing strategies.
Participants will gain insights into the responsibilities, challenges, and best practices associated with test management in SAP projects. Additionally, the webinar delves into the significance of heatmaps as a visual aid for identifying testing priorities, areas of risk, and resource allocation within SAP landscapes. Through this session, attendees can expect to enhance their understanding of test management principles while learning practical approaches to optimize testing processes in SAP environments using heatmap visualization techniques
What will you get from this session?
1. Insights into SAP testing best practices
2. Heatmap utilization for testing
3. Optimization of testing processes
4. Demo
Topics covered:
Execution from the test manager
Orchestrator execution result
Defect reporting
SAP heatmap example with demo
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Essentials of Automations: Optimizing FME Workflows with ParametersSafe Software
Are you looking to streamline your workflows and boost your projects’ efficiency? Do you find yourself searching for ways to add flexibility and control over your FME workflows? If so, you’re in the right place.
Join us for an insightful dive into the world of FME parameters, a critical element in optimizing workflow efficiency. This webinar marks the beginning of our three-part “Essentials of Automation” series. This first webinar is designed to equip you with the knowledge and skills to utilize parameters effectively: enhancing the flexibility, maintainability, and user control of your FME projects.
Here’s what you’ll gain:
- Essentials of FME Parameters: Understand the pivotal role of parameters, including Reader/Writer, Transformer, User, and FME Flow categories. Discover how they are the key to unlocking automation and optimization within your workflows.
- Practical Applications in FME Form: Delve into key user parameter types including choice, connections, and file URLs. Allow users to control how a workflow runs, making your workflows more reusable. Learn to import values and deliver the best user experience for your workflows while enhancing accuracy.
- Optimization Strategies in FME Flow: Explore the creation and strategic deployment of parameters in FME Flow, including the use of deployment and geometry parameters, to maximize workflow efficiency.
- Pro Tips for Success: Gain insights on parameterizing connections and leveraging new features like Conditional Visibility for clarity and simplicity.
We’ll wrap up with a glimpse into future webinars, followed by a Q&A session to address your specific questions surrounding this topic.
Don’t miss this opportunity to elevate your FME expertise and drive your projects to new heights of efficiency.
3. Introduction
Without question, the TCP/IP suite is the most widely
implemented protocol on networks today.
This section deals with the concept that governs routing and
switching. It starts however, by discussing one of the most complex
facet of TCP/IP: addressing
4. IP Addressing
To communicate on network using TCP/IP, each systems must be assigned
a unique address. The address defines both the number of the network to
which the device is attached and the number of the node on that
network.
In other words, the IP address provides two pieces of information. It’s a
bit like a street name and house number in a person’s home address.
5. IP Addressing
Each device on a logical network segment must have the same network
address as all the other devices on the network segment. All the devices
on that network segment must then have different node addresses.
In IP addressing, another set of numbers, called a subnet mask, defines
which portion of the IP address refers to the network address and which
refers to the node (host) address.
6. A node or host is any device connected to the network. A node might
be a client computer, a server computer, a printer, a router, or a
gateway.
IP addressing is different in IPv4 and IPv6.
7. IPv4
The IPv4 address comprises of four set of 8 binary bit, which are called
octets.
IP address contains 32 bits.
Each bit in each octet is assigned a decimal value. The far-left bit has a
value of 128, followed by 64, 32, 16, 8, 4, 2, and 1, left to right.
Each bit in the octet is either a 1 or a 0.
8. By using the set of 8 bits and manipulating the 1s and
0s, you can obtain any value between 0 and 255 for
each octet.
9. IP Address classes
IP addresses are grouped into logical divisions called classes.
The IPv4 address space has five address classes (A through E); however, only
three (A,B and C) assign addresses to clients.
Class D is reserved for multicast addressing and class E is reserved for future
development.
Of the three Classes available for assignment, each uses a fixed-length subnet
mask to define the separation between the network and the node (host)
address.
11. Subnet Mask Assignment
A Subnet mask is a 32-bit number that masks an IP address, and divides
the IP address into network address and host address. Subnet Mask is
made by setting network bits to all "1"s and setting host bits to all "0"s.
Within a given network, two host addresses are reserved for special
purpose, and cannot be assigned to hosts. The "0" address is assigned a
network address and "255" is assigned to a broadcast address, and they
cannot be assigned to hosts.
13. Subnetting
Subnetting is a process by which the node portion of an IP address create
more networks than you would have if you used the default subnet mask
For example, suppose that you have been assigned the Class B address
150.150.0.0. Using this address and the default subnet mask, you could
have a single network (150.150) and use the rest of the address as node
addresses. This would give you a large number of possible node
addresses, which in reality is probably not useful.
14. With Subnetting, you use bits from the node portion of the address
to create more network addresses. This reduces the number of nodes
per network, but you probably will still have more than enough.
15. Two Reasons for Subnetting
1. It enables you to use IP address range more effectively
2. It makes IP networking more secure and manageable by providing a
mechanism to create multiple networks rather than having just one.
◦ Using multiple networks confines traffic to the network that it needs to be on, which reduces
overall network traffic levels.
◦ Multiple subnets also create more broadcast domains, which in turn reduces network-wide
broadcast traffic.
16. Identifying the Differences Between IPv4
Public and Private Networks
A public Network is a network to which anyone can connect. The best example
of such a network is the internet.
A private network is any network to which access is restricted. A corporate
network and a network in a school are examples.
To connect a system to the internet, you need to get a valid registered IP
address. Most commonly, you can obtain this from your internet service
provider (ISP). These addresses are called public addresses.
17. Private Address Ranges
To provide flexibility in addressing and to prevent an incorrectly configured
network from polluting the internet, certain ranges are set aside for private use.
These addresses ranges are called Private Address Ranges because internet
routers are configured to ignore any packets they see that uses these addresses.
So, a Private address cannot be on the internet because it cannot be routed to
public networks.
19. Classless Inter-domain Routing
Classless Interdomain Routing (CIDR) is an IPv4 method of assigning addresses
outside the standard Class A, B, and C structure. Specifying the number of the bits
in the subnet mask offers more flexibility than three standard class definitions.
Using CIDR, addresses are assigned using a value known as the slash. The actual
value of the slash depends on how many bits of the subnet mask are used to
express the network portion of the address.
For example, a subnet mask that uses all 8 bits from the first octet and 4 form the
second octet would be described as /12, or “slash 12.”
20. Default Gateways
Default gateways are the means by which a device can access hosts on other networks
for which it does not have a specifically configured route. Most workstation
configurations default to using default gateways rather than having any static route
configured.
When a system wants to communicate with another device, it first determines whether
the host is on the local network or a remote network. If the host is on a remote
network, the system looks in the routing table to determine whether it has an entry for
the network on which the remote host resides. If it does, it uses that route. If it does
not, the data is sent to the default gateway.
22. Virtual IP
A Virtual IP Address (VIP) is an IP address assigned to multiple
applications and is often used in high availability implementations.
Data packets coming in are sent to the address and that routes them
to them to the correct network interfaces. This allows hosting of
different applications and virtual appliances on servers with only one
(logical) IP address.
23. IPv4 Address Types
Unicast Address
◦ With unicast address, a single address is specified. Data sent with unicast
addressing is delivered to a specific node identified by the address. It is a
point-to-point address link
Multicast
◦ Multicasting is a mechanism by which groups of network devices can send and
receive data between the members of the group at one time, instead of
separately sending messages to each device in the group.
Broadcast
◦ A broadcast address is at the opposite end of the spectrum from a unicast
address. A broadcast address is an IP address that you can use to target all
systems on a subnet or network instead of single hosts.
24. IPv6 Addressing
IPv4 has served as the internet protocol for 30 years. IPv4 uses a 32-bit
addressing scheme. This gives IPv4 a total of 4,294,967,296 possible unique
addresses that can be assigned to IP devices.
However, the number of IP enabled devices increases daily at a staggering rate.
Not all these addresses can be used by public networks. Many of these addresses
are reserved and are not available for public use. This reduces the number of
addresses that can be allocated as public internet addresses.
25. IPv6 Addressing
The IPv6 project started in the mid-1990s, well before the threat of
IPv4 limitations. The most notable is its capability to handle growth
in public networks. IPv6 uses a 128-bit addressing scheme, enabling
a huge number of possible addresses:
340,282,366,920,938,463,463,374,607,431,768,21 1,456
26. Identifying IPv6 Address
Because of the 128-bit structure of the IPv6 addressing scheme, it looks quite a
bit different. An IPv6 address is divided along 16-bit boundaries, and each
16-bit block is converted into a four-digit hexadecimal number and separated by
colons. The resulting representation is called colon hexadecimal. Now look at
how it works. The example of IPv6 address is
2001:0:4137:9e50:281 1:34ff:3f57:febc
27. IPv6 Addressing
Page 27
Version Address size Total Number of Addresses
IPv4 32 bit 4,294,967,296
IPv6 128 bit
340,282,366,920,938,463,463,374,607,431,768,211,
456
Exhaustion of the limited IPv4 address space.
IPv6 addressing implemented to resolve address shortages.
28. IPv6 Address Architecture
Page 28
IPv6 address consists of a prefix and an interface identifier.
Addresses are commonly displayed in hexadecimal format.
2001:0DB8:0000:0000:0000:0000:0346:8D58
IPv6 Prefix Interface ID
128bits
2001:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx
0010 0000 0000 0001
29. IPv6 Address Condensing
Page 29
Addresses can be condensed by removing the leading zeroes.
The :: operator will further condense strings of zero values.
2001:0DB8:0000:0000:0000:0000:0346:8D58
2001:DB8:0:0:0:0:346:8D58
2001:DB8::346:8D58
30. IPv6 Address Reservations
Page 30
Address Range Description
2000::/3 Current Global Unicast Range
2001:0DB8::/32 Reserved for Documentation
FE80::/10 Link Local Unicast Address Range
FF00::/8 Multicast Address Range
::/128 Unspecified Address
::1/128 Loopback Address
Address ranges have been allocated in IPv6 for unicast and multicast,
along with special addresses for operational support.
31. IPv6 Addressing – Unicast
Page 31
Global unicast address prefixes are used for public networks.
Prefix ranges are reserved for various IP transmission methods.
1111111010 0 Interface ID
10bits 54bits 64bits
Global Routing Prefix Subnet ID Interface ID
48 bits 16 bits 64bits
FE80::387F:10FE:BE28
2001:0:130F::9C0:876A:130B
32. IPv6 Addressing – Multicast
Page 32
11111111 Flags
8bits 4bits 112bits
Scope
4bits
Group ID
Address Range Description
FF02::1 All Nodes Addresses (Link Local)
FF02::2 All Routers Addresses (Link Local)
Multicast addresses are distinguished by an FF00::/8 prefix.
Select multicast address groups are reserved for protocol use.
33. IPv6 Addressing – Anycast
Page 33
Anycast allows multiple instances of a service to be associated with a
single address, enabling a variety of service applications.
2001:0DB8::84C2
2001:0DB8::84C2
HTTP
HTTP
Zone X
Zone Y
34. Comparing IPv4 and IPv6 Addressing
Address features IPv4 Address IPv6 Address
Loopback address 127.0.0.1 0:0:0:0:0:0:0:1 (::1)
Network-wide address IPv4 public address
ranges
Global Unicast IPv6
addresses
Private network
addresses
10.0.0.0
172.16.0.0
192.168.0.0
Site-local address ranges
(FEC0::)
Auto configured
addresses
IPv4 automatic private IP
addressing (169.254.0.0)
Link-local address of the
FE80:: prefix
35. Assigning IP Addressing
Static Addressing
◦ This refers to the manual assignment of IP addresses to system.
Dynamic Addressing
◦ Dynamic addressing refers to the automatic assignment of IP addresses. On modern
networks, the mechanism used to do this is Dynamic Host Configuration Protocol (DHCP).
DHCP, part of the TCP/IP suite, enables a central system to provide client systems with IP
addresses.
36. Identifying MAC Address
A MAC address is sometimes called a physical address because it is
physically embedded in the interface (network interface card).
It is a 6-bytes (48-bits) hexadecimal address that enables a NIC to be
uniquely identified on a network. IEEE assigns MAC Addresses and
hence assign each manufacturer an ID and lets the manufacturer to
allocate IDs.
37. For example, in the MAC address 00:D0:59:09:07:51, the first 3 bytes
(00:D0:59) identifies the manufacturer of the card. This is known as
the Organizational unique identifier (OUI) while last 3 bytes
(09:07:51) are called the Universal LAN MAC address.
As a set of specifications defined by the Internet Engineering Task Force (IETF), Internet Protocol version 6 (IPv6) is the next-generation network layer protocol standard and the successor to Internet Protocol version 4 (IPv4). The most obvious difference between IPv6 and IPv4 is that IP addresses are lengthened from 32 bits to 128 bits. In doing so, IPv6 is capable of supporting an increased number of levels of addressing hierarchy, a much greater number of addressable nodes, and simpler auto-configuration of addresses.
The existing IPv4 address range was implemented at a time when such networks as ARPANET and the National Science Foundation Network (NSFNET) represented the mainstream backbone network, and at a time when IPv4 was considered more than ample to support the range of hosts that would connect to these forming networks. The unforeseen evolution of the Internet from these ancestral networks resulted in the rapid consumption of the IPv4 address space of 4.3 billion addresses (of which many are reserved), for which counter measures in the form of NAT and CIDR were put in place to alleviate the expansion, and give time for a more permanent solution to be formed. Additionally, early IPv4 network address allocation was highly discontiguous making it difficult for addressing to be clustered into effective address groups and ease the burden on global IP routing tables used in autonomous system based routing protocols such as BGP.
Eventually however the IP network is expected to shed its IPv4 addressing to make way for IPv6 and provide the addressing capacity of over 340 undecillion unique addresses, considered more than necessary for continued IP network growth. Along with this, address allocation by the Internet Assigned Numbers Authority (IANA) ensures that address allocation for IPv6 is contiguous for efficient future management of IP routing tables.
The IPv6 address is a 128 bit identifier that is associated with an interface or a set of interfaces as (in the case of anycast address assignment covered later). The address notation due to size is commonly defined in hexadecimal format and written in the form of xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx, where the xxxx relates to the four hexadecimal digits that translate to a 16 bit binary value. The set of 8*16 bit grouped hexadecimal values comprises the 128 bit IPv6 address.
The address itself is made up of an IPv6 prefix that is used to determine the IPv6 network, followed by an interface ID. The basic addressing scheme represents a two layer architecture of prefix and interface ID, however IPv6 address types may contain many sublevels that enable an extensive hierarchical addressing architecture to be formed in the IPv6 network, to support effective grouping and management of users and domains.
The extensive 128 bit size of the IPv6 address means that the general written notation can be impractical in many cases. Another factor that will remain common for quite some time is the presence of long strings of zero bits, primarily due to the unfathomable enormity of the address scale involved. This however brings a means for simplification and practicality when writing IPv6 addresses that contain zero bits. One initial means of simplification of the address scope is through the removal of any leading zero values that are found in each set of 16 bit hexadecimal values.
A special syntax is available to further compress the zeros and is represented in the form of a double colon or "::“. This value indicates one or more 16 bit groups of zeros. In order to enable the string size to be determinable however, the "::" can only appear once in an address. The double colon "::" can be used to compress leading zeros in an address as displayed in the given example.
The IPv6 address space has yet to be completely defined firstly due to the magnitude of the addressing space, for which it is not likely to be required anytime in the near future, secondly the formulation of addressing schemes is still somewhat in an infancy stage with much discussion occurring with regards to the address types that should be applied.
Currently a fraction of the address range has been sectioned for use in the form of a 2000::/3 address range that represents a global unicast address range. This can be understood to be any address that is routable in the public IP network. The governing body IANA (now a part of ICANN) is responsible for distributing portions of this address range to various Regional Internet Registries (RIR) that manage addressing for one of five regions in the world. Supersets of IPv6 addresses in the form of 2400::/12 (APNIC), 2600::/12 (ARIN), 2800::/12 (LACNIC), 2A00::/12 (RIPE NCC) and 2C00::/12 (AfriNIC) have been allocated, allowing the potential for addressing for a given region to be referenced and managed in the meantime using a single address prefix. Also contained within the 2000::/3 prefix range are reserved address fields, including 2001:0DB8::/32 that is used to reference fictional addressing within documentation.
Multicast addressing is defined within IPv6 as FF00::/8, with much of the addressing scope being reserved to specific address ranges (such as link local) and in support of routing protocols, in a manner similar to how multicast addresses are used in IPv4. One major change to IPv6 is that there are no broadcast addresses, their function being superseded by multicast addresses, which reduces unnecessary processing by end stations at the MAC layer within IPv6 networks, since hosts are able to filter multicast MAC address groups.
Some special addresses also exist within IPv6 including the unspecified address ::/128 which represents an interface for which there is no IP address currently assigned. This should not be confused however with the default IP address ::/0 which is used as a default address value for any network in the same way the 0.0.0.0/0 default address is used within IPv4. For the loopback address (127.0.0.1), this is defined in IPv6 as the reserved address ::1/128.
Unicast addressing comprises primarily of global unicast and link local unicast address prefixes, however other forms also exist. All global unicast addresses have a 64-bit interface ID field, with exception to addresses for which the first three bits in the address are 000. For such addresses there is no constraint on the size or structure of the interface ID field. The address format for global unicast addresses comprise of a hierarchy in the form of a global routing prefix and a subnet identifier, followed by the interface identifier. The global routing prefix is designed to be structured hierarchically by the Regional Internet Registries (RIR) and the Internet Service Providers (ISP) to whom the RIR distribute IP address prefixes. The subnet field is designed to be structured hierarchically by site administrators to provide up to 65’535 individual subnets.
In terms of the Link Local unicast address, the FE80::/10 means that the first 10 bits of the link local address is clearly distinguishable as 1111111010. The 64-bit interface address range is more than sufficient for the addressing of hosts, and therefore the remaining 54bits within the Link Local address are maintained as 0. The example displays the address formats that can be typically associated with each of the common unicast address types.
It should be noted also that a third unicast addressing scheme, referred to as site local addressing (FC00::/7) was originally proposed in RFC3513 and may appear in some implementations of IPv6, however the addressing range has been deprecated as of RFC4291 and should be avoided as part of future implementations.
A multicast address is an identifier for a set of interfaces (typically belonging to different nodes). A packet sent to a multicast address is delivered to all interfaces identified by that address. The multicast address range is determined from a FF00::/8 address prefix and is clearly distinguishable from the first 8 bits which are always set to 11111111. The address architecture for multicast addresses comprises of flags, scope and group ID fields.
The flags field though 4 bits, is currently used to support identification of whether a multicast address is well known (as in assigned and recognized by the global internet numbering authority) or transient, meaning the multicast address is temporarily assigned. A second bit value is used within the flags field to determine whether or not the multicast address is based on the network prefix. The remaining higher order two bits are reserved and remain set to 0.
The scope defines a number of potential ranges to which the multicast is applied. Generally this may refer to a node local scope FF01::, or to the link local scope FF02:: which refers to the listeners within the scope of the link-layer, such as an Ethernet segment for which a gateway defines the boundary. Common well known link local multicast addresses include FF02::1 which is used to forward to all nodes, and FF02::2 that allows multicast transmission to all router addresses.
Anycast represents an identifier for a set of interfaces (typically belonging to different nodes). A packet sent to an anycast address is delivered to one of the interfaces identified by that address (the "nearest" one, according to the routing protocols' measure of distance). The anycast architecture commonly involves an anycast initiator and one or multiple anycast responders.
The anycast initiator may commonly be a host that is enquiring to a service such as in the case of a DNS lookup, or requesting the retrieval of specific data, such as HTTP web page information. Anycast addresses are in no way distinguishable from unicast addresses, with the exception that multiple instances of the same address are applied to a given device.
The application for anycast over traditional methods of addressing brings many potential benefits to enterprise network operation and performance. Service redundancy is one such application for anycast that allows a service such as HTTP to be used across multiple servers, for which the same address is associated with one or more servers that operate as anycast responders. In the event that service failure occurs on one server, clients would need traditionally to search for the address of another server and then restart/reestablish communication.
Using anycast addressing, the anycast initiator automatically establishes communication with another server that is using the same address, providing an effective redundancy solution.
In terms of performance, multi-server access can be applied, where an anycast initiator establishes a connection to the same unicast address, each connection automatically establishes to multiple servers that specify the same anycast address such as in the case of a client browsing a company web page.
The client will download the html file and individual image files from separate mirror servers. As a result, the anycast initiator untilizes bandwidth from multiple servers to download the web page much more quickly than is possible with a unicast approach.