Introduction to nanoWatt XLP: PIC18F46J50
•
0 likes•1,692 views
The document provides an introduction to the PIC18F46J50 microcontroller, describing its low power nanoWatt technology features like deep sleep mode down to 15nA, peripherals like USB and capacitive touch support, and typical applications in battery powered devices; it also outlines the memory map and block diagrams of key components.
Report
Share
Report
Share
![An Introduction to nanoWatt XLP: PIC18F46J50 ,[object Object]](https://image.slidesharecdn.com/microchippic18f46j50-110320212118-phpapp01/85/Introduction-to-nanoWatt-XLP-PIC18F46J50-1-320.jpg)
![Introduction ,[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object]](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
Recommended
Deep Sleep Mode on Microchip PIC18F and PIC24F MCUs
The document provides an overview of deep sleep mode in Microchip PIC18F and PIC24F microcontrollers. Deep sleep is the lowest power mode, consuming as little as 20 nA of current. It powers off the core and SRAM but keeps some peripherals like the real-time clock/calendar active. Various wake-up sources like interrupts, watchdog timers, and pin state changes can exit deep sleep. On wake-up, program execution resumes from the reset vector. Deep sleep is well-suited for applications that need accurate timekeeping during long inactive periods to minimize power consumption.
Microchip's 16-bit and 32-bit PIC MCUs
The document discusses Microchip's 16-bit and 32-bit microcontroller products. It introduces their PIC24F, PIC24H and dsPIC30F families of 16-bit MCUs as well as their 32-bit PIC32 MCUs. It provides an overview of the features of these product families and describes some example applications and solutions developed using Microchip's MCUs. It also discusses debugger tools and starter kits for evaluating Microchip's MCUs.
DSPIC33F: High Performance 16-bit Digital Signal Controllers
The document provides an overview of Microchip's dsPIC33F digital signal controller product family. It describes the dsPIC33F's features such as flash memory size ranging from 12KB to 256KB, RAM from 1K to 32K, operating temperature range from -40°C to +125°C, and peripherals including DMA, timers, and analog to digital converters. It also discusses the dsPIC33F architecture, functional block diagram, development tools, and example motor control application.
Atmel microcontrollers-a tmega328-p_datasheet
The document describes the features of the ATmega328P microcontroller, including its AVR architecture, CPU, memory, I/O ports, analog-to-digital converter, timers, serial interfaces, and power saving modes. It has 32K bytes of flash memory, 1K bytes of EEPROM, 2K bytes of SRAM, and operates between 2.7-5.5 volts with speeds up to 16MHz. It provides various digital and analog features for interfacing with sensors and actuators.
PIC18F2XK20/4XK20 8-Bit Microcontroller Family
Overview of the first 8 members of the new PIC18F K-series 8-bit low-power, low-cost high performance microcontroller family
Pic microcontrollers
This document provides information about the LPC2148 microcontroller socket board. It includes specifications like the LPC2148 microcontroller with 512K memory, 12MHz and 32.768KHz crystals, and a power on reset circuit. Key features of the LPC2148 microcontroller are also summarized, such as 40kB RAM, 512kB flash, USB and serial interfaces, analog and digital I/O, and low power modes. The socket board is used to mount and develop projects with the LPC2148 microcontroller.
Avr and arm
This document provides an overview of AVR and ARM microcontrollers. It discusses Atmel's AVR microcontroller series and key features of the ATmega16 microcontroller. It also covers the ARM7 microcontroller, features of the LPC2148, and interfacing examples for LEDs, LCDs, relays, buzzers, and DC motors. The document concludes by mentioning AVR Studio 4 and μVision4 as integrated development environments for programming AVR and ARM microcontrollers.
AVR Microcontroller
The document summarizes a presentation on AVR microcontrollers. It discusses the AVR family of microcontrollers, highlighting their RISC architecture, 32 general purpose registers, and single cycle instruction execution. It also covers new AVR features, application specific AVRs for tasks like motor control, USB, and CAN, and automotive-qualified AVRs using CMOS process technology.
Recommended
Deep Sleep Mode on Microchip PIC18F and PIC24F MCUs
The document provides an overview of deep sleep mode in Microchip PIC18F and PIC24F microcontrollers. Deep sleep is the lowest power mode, consuming as little as 20 nA of current. It powers off the core and SRAM but keeps some peripherals like the real-time clock/calendar active. Various wake-up sources like interrupts, watchdog timers, and pin state changes can exit deep sleep. On wake-up, program execution resumes from the reset vector. Deep sleep is well-suited for applications that need accurate timekeeping during long inactive periods to minimize power consumption.
Microchip's 16-bit and 32-bit PIC MCUs
The document discusses Microchip's 16-bit and 32-bit microcontroller products. It introduces their PIC24F, PIC24H and dsPIC30F families of 16-bit MCUs as well as their 32-bit PIC32 MCUs. It provides an overview of the features of these product families and describes some example applications and solutions developed using Microchip's MCUs. It also discusses debugger tools and starter kits for evaluating Microchip's MCUs.
DSPIC33F: High Performance 16-bit Digital Signal Controllers
The document provides an overview of Microchip's dsPIC33F digital signal controller product family. It describes the dsPIC33F's features such as flash memory size ranging from 12KB to 256KB, RAM from 1K to 32K, operating temperature range from -40°C to +125°C, and peripherals including DMA, timers, and analog to digital converters. It also discusses the dsPIC33F architecture, functional block diagram, development tools, and example motor control application.
Atmel microcontrollers-a tmega328-p_datasheet
The document describes the features of the ATmega328P microcontroller, including its AVR architecture, CPU, memory, I/O ports, analog-to-digital converter, timers, serial interfaces, and power saving modes. It has 32K bytes of flash memory, 1K bytes of EEPROM, 2K bytes of SRAM, and operates between 2.7-5.5 volts with speeds up to 16MHz. It provides various digital and analog features for interfacing with sensors and actuators.
PIC18F2XK20/4XK20 8-Bit Microcontroller Family
Overview of the first 8 members of the new PIC18F K-series 8-bit low-power, low-cost high performance microcontroller family
Pic microcontrollers
This document provides information about the LPC2148 microcontroller socket board. It includes specifications like the LPC2148 microcontroller with 512K memory, 12MHz and 32.768KHz crystals, and a power on reset circuit. Key features of the LPC2148 microcontroller are also summarized, such as 40kB RAM, 512kB flash, USB and serial interfaces, analog and digital I/O, and low power modes. The socket board is used to mount and develop projects with the LPC2148 microcontroller.
Avr and arm
This document provides an overview of AVR and ARM microcontrollers. It discusses Atmel's AVR microcontroller series and key features of the ATmega16 microcontroller. It also covers the ARM7 microcontroller, features of the LPC2148, and interfacing examples for LEDs, LCDs, relays, buzzers, and DC motors. The document concludes by mentioning AVR Studio 4 and μVision4 as integrated development environments for programming AVR and ARM microcontrollers.
AVR Microcontroller
The document summarizes a presentation on AVR microcontrollers. It discusses the AVR family of microcontrollers, highlighting their RISC architecture, 32 general purpose registers, and single cycle instruction execution. It also covers new AVR features, application specific AVRs for tasks like motor control, USB, and CAN, and automotive-qualified AVRs using CMOS process technology.
Msp430g2453
The MSP430G2x53 and MSP430G2x13 are ultra-low power mixed signal microcontrollers from Texas Instruments with various features including low power consumption, integrated timers, analog comparator, and communication interfaces. They are available in different package and memory configurations suitable for applications such as low-cost sensor systems that capture analog signals and transmit processed digital data.
MC9RS08KA8/4 Introduction
The MC9RS08KA8/4 microcontroller unit is a low-cost MCU with an RS08 core, 8K flash, 254B RAM, 12-channel 10-bit ADC, and 18 I/O pins. It is intended for applications like home appliances, medical equipment, and general purpose use. The document provides an overview of the features and applications of the MC9RS08KA8/4 MCU and recommends additional resources for ordering samples and getting technical support.
8-Bit CMOS Microcontrollers with nanoWatt Technology
The document introduces the PIC12F635 8-bit CMOS microcontroller with nanowatt technology. It has a RISC CPU, low power consumption, various modules like timers and comparators, and new features like a KEELOQ encryption peripheral. It is suitable for applications like motor control, sensor interfaces, and power management. The document provides details on its architecture, peripherals, development tools, and ordering information.
Hardware required to build a basic Robot
This document provides information about hardware components used in a microcontroller project including an ATmega16 microcontroller, L293D motor driver IC, 7805 voltage regulator, and an AVR development board. It describes the ATmega16 architecture and pin configuration, the functions of the L293D for driving motors, specifications of the 7805 voltage regulator for providing 5V power, and briefly mentions the AVR development board.
ATMEGA 328
The Atmega328 is a low-power 8-bit microcontroller based on AVR architecture that can achieve throughputs of 1 MIPS per MHz. It has 32KB of flash memory, 1KB of EEPROM, 2KB of SRAM, 3 I/O ports, 32 general purpose registers, and a 16-bit timer/counter that can generate delays of up to 262ms when running on a 16MHz oscillator.
Developing an avr microcontroller system
This document provides an introduction to microcontrollers and AVR microcontrollers. It discusses what microprocessors and microcontrollers are, how they are used in various electronic devices. It then focuses on the AVR architecture, its features like flash memory, SRAM, EEPROM. It demonstrates how to interface an AVR chip with an LCD display and program it to display "Hello World". It describes the tools and steps needed to program the AVR, including using AVR Studio, GCC compiler and PonyProg programmer.
ATmega328p
atmega ,Here you can get the ATmega328p Microcontroller pin configuration how to use , what is the functionality difference with Arduino, about microchip and Atmel.
Introduction to AVR Microcontroller
This document provides an introduction to AVR microcontrollers. It discusses the history of microcontrollers beginning in 1971 and components like CPU, ROM, RAM and I/O. AVR microcontrollers were introduced in 1996 and range from 1 to 256KB with 8 to 100 pins. They are cheaper and slower than microprocessors but are useful for specialized applications. The document outlines the AVR architecture and family as well as development tools and support for AVR microcontrollers.
Robotix Tutorial 9
The document discusses microcontrollers from the AVR family made by Atmel, specifically the ATmega8. It provides details on the ATmega8's features such as its 8-bit RISC architecture, 8KB of flash memory, timers, PWM channels, ADC, and communication interfaces. It also introduces software tools for programming AVR microcontrollers like WinAVR and libraries like AVRlib. Code examples are given for configuring PWM motor control, reading the ADC, and serial communication via UART.
3 embedded gr_ppapag_msp430_arch
This document contains lecture notes for an introduction to the MSP430 microcontroller family from Texas Instruments. It discusses the MSP430 architecture including the CPU, registers, instruction set, memory organization, peripherals and provides examples of MSP430-based systems. It also describes how to get started with the EasyWeb2 development board for the MSP430 using a simple code example to blink an LED by toggling a port pin.
8-bit PIC Microcontrollers
The document introduces Microchip's 8-bit PIC microcontrollers and describes their families and features. It discusses the PIC10F/12F, PIC16F and PIC18F families and their applications. It also describes starter kits, development tools and additional resources for working with 8-bit PIC MCUs. Microchip offers low-cost hardware and software solutions to meet various application needs such as automating garden watering.
AVR introduction
The document discusses Atmel's AVR microcontroller family. It describes the growing AVR family which includes tiny, mega, and application specific AVR microcontrollers. The AVR architecture is scalable, has a RISC design with powerful instruction set, and provides high integration on a single chip. Development tools and support are also available for creating systems with AVR microcontrollers.
Msp430
The document discusses the MSP430 microcontroller family from Texas Instruments. It provides an overview of the MSP430 architecture including its ultra-low power capabilities, peripherals, and development tools. Specific MSP430 derivatives and their features are also highlighted.
Toshiba Cortex Seminar in Israel
Toshiba will use ARM cores in all future microcontroller application-specific standard products (ASSPs). This includes the ARM9 for display applications and Cortex M3 for embedded applications across various markets like home appliances, industrial equipment, consumer electronics, and automotive. Toshiba's Cortex M3 microcontrollers offer features like low power consumption, integrated analog circuits, safety certifications, and support for motor control, with families targeting applications in home appliances, industrial controls, sensors, and more. The document provides details on several Toshiba Cortex M3 microcontroller families and their target applications.
Practical reverse engineering and exploit development for AVR-based Embedded ...
The document outlines an agenda for a training on practical firmware reversing and exploit development for AVR-based embedded devices. The training will cover: (1) an introduction to the AVR architecture through an example; (2) pre-exploitation techniques; (3) exploitation and building return-oriented programming (ROP) chains; and (4) post-exploitation tricks. It provides background information on the AVR architecture, which is used widely in embedded and IoT devices, and discusses features like memory organization, registers, interrupts, and assembly instructions. Development tools for AVR like Atmel Studio, AVR-GCC, and debuggers are also briefly mentioned.
Arrow Israel the MCU Home
This document summarizes Arrow Israel's record sales in 2010 of microcontroller units (MCUs) based on the ARM architecture. It provides an overview of Arrow Israel's product portfolio including various ARM-based MCUs from manufacturers like NXP and Texas Instruments. Feature comparisons are given for the ARM7, Cortex-M0, M3, and M4 architectures. upcoming products like NXP's LPC11U00 Cortex-M0 MCU and Texas Instrument's Kinetis MCU families are also highlighted.
ATmega 16
The document provides an overview of AVR microcontrollers, including their history, architecture, types, and common peripherals. AVR microcontrollers were developed by Atmel beginning in 1996 and use on-chip flash memory for program storage. They are available in three categories - Tiny, Mega, and Xmega - with the Mega being the most popular. The AVR architecture employs 32 general purpose registers, static RAM, EEPROM, flash memory, timers/counters, and I/O ports. Common peripherals that can be interfaced include LEDs, 7-segment displays, switches, DC motors, and LCDs. Timers and interrupts are also discussed.
Basics of ATmega32
The document provides an overview of the ATMega32 microcontroller. It describes the microcontroller's key features which include being 8-bit, low-power, and having 32Kbytes of programmable flash memory. It also outlines the microcontroller's ports, power sources, and oscillator options. Programming tools that can be used with the ATMega32 like various compilers and hardware programmers are also listed.
OVERVIEW OF MSP430G2553
The document provides an overview of the MSP430 microcontroller family from Texas Instruments, focusing on the MSP430G2xx series and the MSP430G2553 model. Key points:
- The MSP430 is a 16-bit microcontroller designed for low power consumption in embedded applications.
- The MSP430G2xx series features flash-based ultra-low power MCUs from 0.5-56KB flash and 128B-4KB RAM.
- The MSP430G2553 has 512B RAM, 16KB flash, and supports frequencies up to 16MHz with various power saving modes down to 0.1uA current consumption.
Atmega32
This document describes the features and specifications of the ATmega32 8-bit microcontroller. It includes details on the microcontroller's architecture such as its AVR CPU core, 32K bytes of flash memory, 1024 bytes of EEPROM, 2K bytes of SRAM, and various peripherals. It also provides information on the microcontroller's pins and packages, operating voltages, speed grades, and power consumption. The document is intended to provide an overview of the capabilities and technical specifications of the ATmega32 microcontroller.
datasheet.pdf
The document describes the PIC16F8X family of microcontrollers, which includes the PIC16F83, PIC16F84, PIC16CR83, and PIC16CR84. It has features like a RISC CPU, programmable I/O pins, timer module, data EEPROM memory, and special features like low power modes, watchdog timer, and in-circuit serial programming. The PIC16F8X is suitable for applications ranging from motor control to security devices due to its small size, low power usage, and reprogrammable Flash memory.
PIC18 J-Series Microcontrollers
The document introduces Microchip's PIC18 J-series microcontrollers (MCUs) and development tools. It discusses the various PIC18 J-series families that offer different features like general purpose, USB, LCD, and Ethernet functionality. It also describes the development boards and tools available to help users get started with designing and programming PIC18 J-series MCUs.
More Related Content
What's hot
Msp430g2453
The MSP430G2x53 and MSP430G2x13 are ultra-low power mixed signal microcontrollers from Texas Instruments with various features including low power consumption, integrated timers, analog comparator, and communication interfaces. They are available in different package and memory configurations suitable for applications such as low-cost sensor systems that capture analog signals and transmit processed digital data.
MC9RS08KA8/4 Introduction
The MC9RS08KA8/4 microcontroller unit is a low-cost MCU with an RS08 core, 8K flash, 254B RAM, 12-channel 10-bit ADC, and 18 I/O pins. It is intended for applications like home appliances, medical equipment, and general purpose use. The document provides an overview of the features and applications of the MC9RS08KA8/4 MCU and recommends additional resources for ordering samples and getting technical support.
8-Bit CMOS Microcontrollers with nanoWatt Technology
The document introduces the PIC12F635 8-bit CMOS microcontroller with nanowatt technology. It has a RISC CPU, low power consumption, various modules like timers and comparators, and new features like a KEELOQ encryption peripheral. It is suitable for applications like motor control, sensor interfaces, and power management. The document provides details on its architecture, peripherals, development tools, and ordering information.
Hardware required to build a basic Robot
This document provides information about hardware components used in a microcontroller project including an ATmega16 microcontroller, L293D motor driver IC, 7805 voltage regulator, and an AVR development board. It describes the ATmega16 architecture and pin configuration, the functions of the L293D for driving motors, specifications of the 7805 voltage regulator for providing 5V power, and briefly mentions the AVR development board.
ATMEGA 328
The Atmega328 is a low-power 8-bit microcontroller based on AVR architecture that can achieve throughputs of 1 MIPS per MHz. It has 32KB of flash memory, 1KB of EEPROM, 2KB of SRAM, 3 I/O ports, 32 general purpose registers, and a 16-bit timer/counter that can generate delays of up to 262ms when running on a 16MHz oscillator.
Developing an avr microcontroller system
This document provides an introduction to microcontrollers and AVR microcontrollers. It discusses what microprocessors and microcontrollers are, how they are used in various electronic devices. It then focuses on the AVR architecture, its features like flash memory, SRAM, EEPROM. It demonstrates how to interface an AVR chip with an LCD display and program it to display "Hello World". It describes the tools and steps needed to program the AVR, including using AVR Studio, GCC compiler and PonyProg programmer.
ATmega328p
atmega ,Here you can get the ATmega328p Microcontroller pin configuration how to use , what is the functionality difference with Arduino, about microchip and Atmel.
Introduction to AVR Microcontroller
This document provides an introduction to AVR microcontrollers. It discusses the history of microcontrollers beginning in 1971 and components like CPU, ROM, RAM and I/O. AVR microcontrollers were introduced in 1996 and range from 1 to 256KB with 8 to 100 pins. They are cheaper and slower than microprocessors but are useful for specialized applications. The document outlines the AVR architecture and family as well as development tools and support for AVR microcontrollers.
Robotix Tutorial 9
The document discusses microcontrollers from the AVR family made by Atmel, specifically the ATmega8. It provides details on the ATmega8's features such as its 8-bit RISC architecture, 8KB of flash memory, timers, PWM channels, ADC, and communication interfaces. It also introduces software tools for programming AVR microcontrollers like WinAVR and libraries like AVRlib. Code examples are given for configuring PWM motor control, reading the ADC, and serial communication via UART.
3 embedded gr_ppapag_msp430_arch
This document contains lecture notes for an introduction to the MSP430 microcontroller family from Texas Instruments. It discusses the MSP430 architecture including the CPU, registers, instruction set, memory organization, peripherals and provides examples of MSP430-based systems. It also describes how to get started with the EasyWeb2 development board for the MSP430 using a simple code example to blink an LED by toggling a port pin.
8-bit PIC Microcontrollers
The document introduces Microchip's 8-bit PIC microcontrollers and describes their families and features. It discusses the PIC10F/12F, PIC16F and PIC18F families and their applications. It also describes starter kits, development tools and additional resources for working with 8-bit PIC MCUs. Microchip offers low-cost hardware and software solutions to meet various application needs such as automating garden watering.
AVR introduction
The document discusses Atmel's AVR microcontroller family. It describes the growing AVR family which includes tiny, mega, and application specific AVR microcontrollers. The AVR architecture is scalable, has a RISC design with powerful instruction set, and provides high integration on a single chip. Development tools and support are also available for creating systems with AVR microcontrollers.
Msp430
The document discusses the MSP430 microcontroller family from Texas Instruments. It provides an overview of the MSP430 architecture including its ultra-low power capabilities, peripherals, and development tools. Specific MSP430 derivatives and their features are also highlighted.
Toshiba Cortex Seminar in Israel
Toshiba will use ARM cores in all future microcontroller application-specific standard products (ASSPs). This includes the ARM9 for display applications and Cortex M3 for embedded applications across various markets like home appliances, industrial equipment, consumer electronics, and automotive. Toshiba's Cortex M3 microcontrollers offer features like low power consumption, integrated analog circuits, safety certifications, and support for motor control, with families targeting applications in home appliances, industrial controls, sensors, and more. The document provides details on several Toshiba Cortex M3 microcontroller families and their target applications.
Practical reverse engineering and exploit development for AVR-based Embedded ...
The document outlines an agenda for a training on practical firmware reversing and exploit development for AVR-based embedded devices. The training will cover: (1) an introduction to the AVR architecture through an example; (2) pre-exploitation techniques; (3) exploitation and building return-oriented programming (ROP) chains; and (4) post-exploitation tricks. It provides background information on the AVR architecture, which is used widely in embedded and IoT devices, and discusses features like memory organization, registers, interrupts, and assembly instructions. Development tools for AVR like Atmel Studio, AVR-GCC, and debuggers are also briefly mentioned.
Arrow Israel the MCU Home
This document summarizes Arrow Israel's record sales in 2010 of microcontroller units (MCUs) based on the ARM architecture. It provides an overview of Arrow Israel's product portfolio including various ARM-based MCUs from manufacturers like NXP and Texas Instruments. Feature comparisons are given for the ARM7, Cortex-M0, M3, and M4 architectures. upcoming products like NXP's LPC11U00 Cortex-M0 MCU and Texas Instrument's Kinetis MCU families are also highlighted.
ATmega 16
The document provides an overview of AVR microcontrollers, including their history, architecture, types, and common peripherals. AVR microcontrollers were developed by Atmel beginning in 1996 and use on-chip flash memory for program storage. They are available in three categories - Tiny, Mega, and Xmega - with the Mega being the most popular. The AVR architecture employs 32 general purpose registers, static RAM, EEPROM, flash memory, timers/counters, and I/O ports. Common peripherals that can be interfaced include LEDs, 7-segment displays, switches, DC motors, and LCDs. Timers and interrupts are also discussed.
Basics of ATmega32
The document provides an overview of the ATMega32 microcontroller. It describes the microcontroller's key features which include being 8-bit, low-power, and having 32Kbytes of programmable flash memory. It also outlines the microcontroller's ports, power sources, and oscillator options. Programming tools that can be used with the ATMega32 like various compilers and hardware programmers are also listed.
OVERVIEW OF MSP430G2553
The document provides an overview of the MSP430 microcontroller family from Texas Instruments, focusing on the MSP430G2xx series and the MSP430G2553 model. Key points:
- The MSP430 is a 16-bit microcontroller designed for low power consumption in embedded applications.
- The MSP430G2xx series features flash-based ultra-low power MCUs from 0.5-56KB flash and 128B-4KB RAM.
- The MSP430G2553 has 512B RAM, 16KB flash, and supports frequencies up to 16MHz with various power saving modes down to 0.1uA current consumption.
Atmega32
This document describes the features and specifications of the ATmega32 8-bit microcontroller. It includes details on the microcontroller's architecture such as its AVR CPU core, 32K bytes of flash memory, 1024 bytes of EEPROM, 2K bytes of SRAM, and various peripherals. It also provides information on the microcontroller's pins and packages, operating voltages, speed grades, and power consumption. The document is intended to provide an overview of the capabilities and technical specifications of the ATmega32 microcontroller.
What's hot (20)
8-Bit CMOS Microcontrollers with nanoWatt Technology
8-Bit CMOS Microcontrollers with nanoWatt Technology
Practical reverse engineering and exploit development for AVR-based Embedded ...
Practical reverse engineering and exploit development for AVR-based Embedded ...
Similar to Introduction to nanoWatt XLP: PIC18F46J50
datasheet.pdf
The document describes the PIC16F8X family of microcontrollers, which includes the PIC16F83, PIC16F84, PIC16CR83, and PIC16CR84. It has features like a RISC CPU, programmable I/O pins, timer module, data EEPROM memory, and special features like low power modes, watchdog timer, and in-circuit serial programming. The PIC16F8X is suitable for applications ranging from motor control to security devices due to its small size, low power usage, and reprogrammable Flash memory.
PIC18 J-Series Microcontrollers
The document introduces Microchip's PIC18 J-series microcontrollers (MCUs) and development tools. It discusses the various PIC18 J-series families that offer different features like general purpose, USB, LCD, and Ethernet functionality. It also describes the development boards and tools available to help users get started with designing and programming PIC18 J-series MCUs.
Datasheet
This document provides information on the PIC16F8X family of microcontrollers, including the PIC16F83, PIC16F84, PIC16CR83, and PIC16CR84 models. It describes the key features of these devices such as their RISC CPU architecture, memory organization including flash program memory and EEPROM data memory, I/O ports, timer functions, and special features including in-circuit serial programming and low power sleep mode. Application areas mentioned include automotive, appliance, sensor, security, and smart card uses.
8 bit microcontroller
The document provides information about various 8-bit microcontrollers including the 8051, PIC, and AVR families. It discusses the original 8051 microcontroller released by Intel in 1981 and its features. It then summarizes the different members of the 8051 family and versions produced by other manufacturers like Atmel. The document also summarizes the different series within the PIC family from Microchip including the baseline, mid-range, enhanced mid-range, and PIC18 architectures. Finally, it discusses the AVR architecture from Atmel and provides details on the tinyAVR, megaAVR, and XmegaAVR families.
12C5XX.PDF
This document provides an overview of the PIC12C508 and PIC12C509 microcontrollers. It describes the key architectural features, including the Harvard architecture with separate program and data buses, 12-bit wide instructions, 8-bit ALU, and 33 single-cycle instructions. It also outlines the memory organization and peripherals, which include a real-time clock, watchdog timer, sleep mode, and programmable code protection. The document provides specifications for the memory sizes, operating voltage range, oscillator options, and packaging of the two microcontroller models.
Overview of Microcontroller and ATMega32 microcontroller
This presentation provides an overview of microcontrollers and the ATMega32 microcontroller. It defines a microcontroller as a small computer on a single chip that contains a CPU, memory, and programmable I/O. It describes the typical elements of a microcontroller including the processor, memory, I/O peripherals, ADC, DAC, and system bus. It then discusses features of the ATMega32 like its architecture, pins, applications, and special features. In closing, it thanks the audience for their time.
8051 Presentation
This is a ppt by Sir Sanjoy Banerjee, my microprocessor and microcontroller teacher.
Plz Visit: www.karaoke-cosmos.blogspot.com
Introduction to PIC18FX6J Series MCUs
The document provides an introduction to PIC18FX6J series microcontrollers from Microchip Technology, outlining their key features which include nanoWatt XLP low power technology, peripheral modules like ECCP, EUSART, MSSP, and CTMU, as well as their target applications in battery powered devices, utility metering, asset tracking, and more. It describes the core features, low power modes, clocking options, and peripheral modules in detail over 17 pages.
How to design a Passive Infrared (PIR) Open Source Project
This article details the hardware and software required for a fully functional passive infrared (PIR) sensor with an associated remote control unit. The remote control unit adjusts key algorithm detection parameters which are stored in the MC68HC908JK1/3 FLASH memory area.
Pic16f87x1a
The document discusses code protection features of Microchip microcontrollers. It notes that Microchip products meet specifications in their data sheets, and that code protection does not guarantee the code is unbreakable. Attempts to break code protection may violate copyright law. The document provides an overview of features for several Microchip microcontrollers.
Introduction to PIC.pptx
The document provides an introduction to the PIC microcontroller including its origins, architecture, and key features. It discusses the PIC16F877A microcontroller in detail including its register file map, pin configuration, status register, and difference compared to the 8051 microcontroller. Examples of writing assembly language code and C code for blinking an LED are also provided.
Microchip's PICs 8 and 16 bits
This document discusses Microchip's PIC microcontrollers, including their 8-bit and 16-bit families. It covers various programming models and architectures used by PIC MCs. Peripherals and interrupts for both 8-bit and 16-bit PICs are described. The document also discusses power saving techniques, development tools from Microchip including the MPLab X IDE, debugging methods, and online shops for purchasing PIC MCs and development boards.
Data Sheet PIC 16F84
This document provides information about the PIC16F8X family of microcontrollers. It includes the PIC16F83, PIC16F84, PIC16CR83, and PIC16CR84 devices. The document discusses features like memory organization, I/O ports, timers, EEPROM memory, instruction set, and electrical characteristics. It is intended to help engineers select and use these microcontrollers in applications such as motor control, sensors, locks, and other embedded systems.
PIC 16F84
This document provides information about the PIC16F8X family of microcontrollers. It includes the PIC16F83, PIC16F84, PIC16CR83, and PIC16CR84 devices. The document discusses features like memory organization, I/O ports, timers, EEPROM memory, instruction set, and electrical characteristics. It is intended to help engineers select and use these microcontrollers in applications such as motor control, sensors, locks, and other embedded systems.
embedded system
This document provides a summary of a practical training seminar report on embedded systems conducted at CMC Academy in Jaipur. It discusses the company profile of CMC Academy, provides definitions and comparisons of microprocessors and microcontrollers. It also describes some common electronic components used in embedded systems like resistors, LEDs, transistors, integrated circuits. Programming concepts for 8051 microcontrollers like I/O ports, timers and interrupts are explained. The document concludes by noting the widespread use of embedded systems in appliances, vehicles, medical devices and more.
PIC Introduction and explained in detailed
The document provides an introduction to the PIC microcontroller. It discusses what a microcontroller is, compares microcontrollers to general purpose microprocessors, and briefly outlines the history of the PIC microcontroller. It then describes features of the PIC16F84 microcontroller including its clock generator, reset function, ports, central processing unit, and memory organization including flash memory, RAM, and ROM. It also covers the timer and prescalar functions.
electronic voting machine by rfid
This document provides details on designing an RFID reader based attendance system using a microcontroller. It includes the objectives, components, pin layout, block diagram and description of the project. The key components are an RFID reader, microcontroller, LCD, switches and 24C02 flash memory. The microcontroller interfaces with the RFID reader and LCD to read RFID tags and display attendance records on the LCD. It also includes explanations of microcontrollers, the 8051 microcontroller architecture, and provides an example of using a microcontroller to automatically turn a light on and off every 30 seconds.
Pic16 c505
The PIC16C505 is an 8-bit microcontroller with 1024 bytes of program memory and 72 bytes of data memory. It uses a Harvard architecture with separate program and data buses. The PIC16C505 has a RISC-style architecture with 33 single-cycle instructions. It includes features like an 8-bit ALU, 8-bit working register, STATUS register, and Timer0 module. The device comes in 14-pin packages and supports features like in-circuit serial programming and various oscillator options.
Datasheet PIC16f887
This document provides information on Microchip's PIC16F882/883/884/886/887 microcontrollers, including:
- Key features such as a 35 instruction RISC CPU operating up to 20MHz, precision internal oscillator, low power sleep mode, and 24/35 I/O pins.
- On-chip peripherals including timers, analog comparators, A/D converter, USART, and SPI modules.
- Product specifications including program memory, data memory, I/O count, and temperature range for each device.
- Pinout diagrams showing I/O pin configurations for 28-pin PDIP, SOIC, SSOP, and QFN packages.
Pic16f87
The document provides an overview of the PIC16F87XA family of microcontrollers. It describes their features such as program memory size, data memory size, I/O pins, analog-to-digital converter channels, timers, serial communication interfaces, and operating speed. The document also includes pin diagrams and electrical specifications for the PIC16F873A, PIC16F874A, PIC16F876A, and PIC16F877A devices.
Similar to Introduction to nanoWatt XLP: PIC18F46J50 (20)
Overview of Microcontroller and ATMega32 microcontroller
Overview of Microcontroller and ATMega32 microcontroller
How to design a Passive Infrared (PIR) Open Source Project
How to design a Passive Infrared (PIR) Open Source Project
More from Premier Farnell
Being a business assistant with element14 in krakow
The document provides information about the Business Assistant role at element14, including:
1) The responsibilities of a Business Assistant include project management, communication, preparing for meetings, research, and process improvement.
2) The role requires working in a fast-paced environment, developing networks, managing priorities, clear communication, and independent decision making.
3) Desired skills are strong IT skills, planning, producing quality work under pressure, excellent English skills, interpersonal skills, and project management experience.
Optical Encoders
The document provides an overview of optical encoders from Grayhill Inc., including how they work, common parameters, and applications. It describes incremental and absolute encoders, as well as human interface, general purpose, special function, and machine interface encoder products. Specific encoder models are detailed along with their typical resolution, features, and suitable applications.
PSA-T Series Spectrum Analyser: PSA1301T/ PSA2701T
The document provides an overview of the PSA-T series spectrum analyzers from TTi, which are handheld instruments built around a Palm computer. It describes the key features and parameters of the PSA1301T and PSA2701T models, including their frequency range, resolution bandwidth, and phase noise. It also discusses the target applications and functions of the integrated Palm computer.
TPS2492/93 – High Voltage Hotswap Controller
The document introduces the TPS2492/93 positive high voltage hotswap controllers from Texas Instruments. It provides an overview of hotswap technology and describes the key features of the TPS2492/93 controllers, including their voltage range of 9V to 80V, fault protection capabilities, and output for monitoring load current. It also includes a functional block diagram and description of typical application and basic operation, involving turning on an external N-FET transistor during board insertion and responding to short circuits. Design tools like a calculator and evaluation modules are also mentioned.
Stellaris® 9000 Family of ARM® Cortex™-M3
The document provides an overview of the Stellaris 9000 family of ARM Cortex-M3 microcontrollers from Texas Instruments. It describes the four generations of Stellaris MCUs, their features and applications. It also discusses the ARM Cortex-M3 processor core, development tools and software support for the Stellaris family.
Piccolo F2806x Microcontrollers
The document introduces the Piccolo F2806x microcontrollers from Texas Instruments, which feature a floating point unit, control law accelerator, and new VCU unit for complex math. The F2806x MCUs are aimed at applications like power line modems, UPS systems, and motion control with peripherals including ADCs, PWM, CAN, and USB. Tools like controlSUITE and development kits are provided to help developers create applications using the new features of the F2806x Piccolo series microcontrollers.
Introduce to AM37x Sitara™ Processors
The document introduces the Texas Instruments AM37x Sitara processors and development tools. It provides an overview of the Cortex-A8 core, highlights key features of the AM3715 and AM3703 processors such as graphics acceleration and connectivity options. It also describes the AM37x product line and available development tools like the AM3517 evaluation module.
ETRX3 ZigBee Module: ETRX3
The document introduces the ETRX3 ZigBee module from Telegesis, which features a 32-bit ARM Cortex-M3 processor, integrated antenna, and FCC and IC approval. It describes the hardware specifications and capabilities of the ETRX3 module, including its radio performance, power consumption, and development environment. Additionally, it outlines the included components of the ETRX357DVK development kit and lists several applications that can utilize the ETRX3 ZigBee module.
DMM4000 Benchtop Digital Multimeters
The document introduces the DMM4000 series of benchtop digital multimeters from Tektronix. It provides an overview of the key features and measurement capabilities of the DMM4000 series, including voltage, resistance, current, frequency and other measurements. It describes the different models (DMM4050, 4040, 4020) and their varying specifications in terms of resolution, accuracy, and additional analysis features. The document also provides examples of how to use the DMMs for accurate resistance and nanoampere measurements and describes the graphic display modes available on some models.
Discovering Board for STM8L15x MCUs
This document introduces the STM8L-Discovery board from STMicroelectronics for use with their STM8L ultra-low power MCUs. It provides an overview of the STM8L MCU family and their low-power features. It then describes the STM8L-Discovery board and its components for evaluating and prototyping with STM8L MCUs. An example application of building a wave generator using the board is also briefly mentioned.
Yaw-rate Gyroscopes
STMicroelectronics produces single-axis (yaw) gyroscopes that measure angular movement around the yaw axis using MEMS and the Coriolis effect. Their yaw-rate gyroscopes provide high stability over temperature with analog absolute angular-rate outputs and integrated filters while consuming low power. They also feature self-test and power-down modes for testing and reducing power consumption.
An Overview Study on MEMS digital output motion sensor: LIS331DLH
The document provides an overview of the LIS331DLH MEMS digital output motion sensor from STMicroelectronics. It describes the sensor's key features such as wide voltage compatibility, low power modes, and integrated self-test. Applications include motion detection, free-fall detection, display orientation, and more. Block diagrams are shown of the sensor's architecture, interrupt generation, and SPI interface. A demonstration kit is also mentioned.
LED Solar Garden Lighting Solution From STMicroelectronics
The document discusses an LED solar garden lighting solution from STMicroelectronics. It provides an overview of different types of garden lights, solar cells, batteries, LED drivers, and other components. The solution involves using LED lights powered by a solar panel and rechargeable battery system with an LED driver circuit to control the lights.
Solution on Handheld Signal Generator
This document discusses signal generators and TI's solutions for them. It provides an overview of signal generators, including what they are, their types and basic block diagrams. It then discusses TI's solutions for digital signal processing, data converters, RF upconversion, power management and other components used in signal generators. Finally, it provides selection guides for microcontrollers, DSPs, FPGAs and other relevant components from TI and other manufacturers.
Medium Performance Gyroscopes
The document introduces medium performance gyroscopes from Sensonor Technologies, including their Butterfly Gyro structure and key features of models SAR10/SAR10Z. The gyroscopes offer high reliability, low power consumption, fully digital interface, and on-chip diagnostic monitoring. They are targeted at applications including industrial, aerospace, subsea, and gaming. Evaluation boards are available to help customers test and evaluate the gyroscopes.
Getting to Know the R8C/2A, 2B Group MCUs
The document provides an introduction to the R8C/2A and R8C/2B group of microcontroller units (MCUs) from Renesas. It outlines the key features of the MCUs including their 16-bit CPU core, memory sizes ranging from 48KB to 128KB of ROM and 2.5KB to 7.5KB of RAM, and integrated peripherals such as timers, serial interfaces, A/D converters, and watchdogs. Debugging can be done using a single-wire interface through the MODE pin without using other pins. Contact information is provided for purchasing samples or getting technical support.
SEARAY™ Open Pin Field Interconnects
SEARAY is a high density, high speed board-to-board interconnect system from Samtec with up to 500 I/Os and 1.27mm pitch. It can be configured for single-ended or differential signaling with performance up to 10.5GHz. The document discusses SEARAY's applications in RapidIO and recommends a minimum stencil thickness of 0.005" for processing.
PWM Controller for Power Supplies
The document discusses various types of switching converter topologies used in power supplies such as buck, boost, flyback, and push-pull converters. It then focuses on pulse width modulation (PWM) techniques and current mode PWM controllers, providing information on the UCC38083/4 controller. Examples are given of reference designs and evaluation kits from various manufacturers that use this and other PWM controllers.
Handheld Point of Sale Terminal
The document introduces a reference design for a handheld point of sale (POS) terminal and recommends core components suitable for the application. It discusses features of handheld POS terminals and provides block diagrams and selection guides for microcontrollers, security supervisors, GPRS/CDMA modules, and other peripherals commonly used in handheld POS systems.
Reflective Optical Switch: SFH774X
The document provides an introduction and overview of the Reflective Optical Switch SFH774X from OSRAM, including its key features and applications. It describes the SFH 7740 reflective optical switch as having an adjustable working distance of 0.5-4mm and very low power consumption. It also describes the SFH 7741 proximity sensor and SFH 7743 digital proximity detector, noting their working distances, power consumption, and applications in short range proximity sensing. Block diagrams are included to illustrate the design and operating principles.
More from Premier Farnell (20)
Being a business assistant with element14 in krakow
Being a business assistant with element14 in krakow
PSA-T Series Spectrum Analyser: PSA1301T/ PSA2701T
PSA-T Series Spectrum Analyser: PSA1301T/ PSA2701T
An Overview Study on MEMS digital output motion sensor: LIS331DLH
An Overview Study on MEMS digital output motion sensor: LIS331DLH
LED Solar Garden Lighting Solution From STMicroelectronics
LED Solar Garden Lighting Solution From STMicroelectronics
Recently uploaded
Microsoft - Power Platform_G.Aspiotis.pdf
Revolutionizing Application Development
with AI-powered low-code, presentation by George Aspiotis, Sr. Partner Development Manager, Microsoft
Generating privacy-protected synthetic data using Secludy and Milvus
During this demo, the founders of Secludy will demonstrate how their system utilizes Milvus to store and manipulate embeddings for generating privacy-protected synthetic data. Their approach not only maintains the confidentiality of the original data but also enhances the utility and scalability of LLMs under privacy constraints. Attendees, including machine learning engineers, data scientists, and data managers, will witness first-hand how Secludy's integration with Milvus empowers organizations to harness the power of LLMs securely and efficiently.
Artificial Intelligence for XMLDevelopment
In the rapidly evolving landscape of technologies, XML continues to play a vital role in structuring, storing, and transporting data across diverse systems. The recent advancements in artificial intelligence (AI) present new methodologies for enhancing XML development workflows, introducing efficiency, automation, and intelligent capabilities. This presentation will outline the scope and perspective of utilizing AI in XML development. The potential benefits and the possible pitfalls will be highlighted, providing a balanced view of the subject.
We will explore the capabilities of AI in understanding XML markup languages and autonomously creating structured XML content. Additionally, we will examine the capacity of AI to enrich plain text with appropriate XML markup. Practical examples and methodological guidelines will be provided to elucidate how AI can be effectively prompted to interpret and generate accurate XML markup.
Further emphasis will be placed on the role of AI in developing XSLT, or schemas such as XSD and Schematron. We will address the techniques and strategies adopted to create prompts for generating code, explaining code, or refactoring the code, and the results achieved.
The discussion will extend to how AI can be used to transform XML content. In particular, the focus will be on the use of AI XPath extension functions in XSLT, Schematron, Schematron Quick Fixes, or for XML content refactoring.
The presentation aims to deliver a comprehensive overview of AI usage in XML development, providing attendees with the necessary knowledge to make informed decisions. Whether you’re at the early stages of adopting AI or considering integrating it in advanced XML development, this presentation will cover all levels of expertise.
By highlighting the potential advantages and challenges of integrating AI with XML development tools and languages, the presentation seeks to inspire thoughtful conversation around the future of XML development. We’ll not only delve into the technical aspects of AI-powered XML development but also discuss practical implications and possible future directions.
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
ここ3000字までしか入らないけどタイトルの方がたくさん文字入ると思います。
Mind map of terminologies used in context of Generative AI
Mind map of common terms used in context of Generative AI.
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
Things to Consider When Choosing a Website Developer for your Website | FODUU
Choosing the right website developer is crucial for your business. This article covers essential factors to consider, including experience, portfolio, technical skills, communication, pricing, reputation & reviews, cost and budget considerations and post-launch support. Make an informed decision to ensure your website meets your business goals.
20240607 QFM018 Elixir Reading List May 2024
Everything I found interesting about the Elixir programming ecosystem in May 2024
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
Simplify your search for a reliable Python development partner! This list presents the top 10 trusted US providers offering comprehensive Python development services, ensuring your project's success from conception to completion.
June Patch Tuesday
Ivanti’s Patch Tuesday breakdown goes beyond patching your applications and brings you the intelligence and guidance needed to prioritize where to focus your attention first. Catch early analysis on our Ivanti blog, then join industry expert Chris Goettl for the Patch Tuesday Webinar Event. There we’ll do a deep dive into each of the bulletins and give guidance on the risks associated with the newly-identified vulnerabilities.
Columbus Data & Analytics Wednesdays - June 2024
Columbus Data & Analytics Wednesdays, June 2024 with Maria Copot 20
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers:
* What is Vector Search?
* Importance and benefits of vector search
* Practical use cases across various industries
* Step-by-step implementation guide
* Live demos with code snippets
* Enhancing LLM capabilities with vector search
* Best practices and optimization strategies
Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications.
#MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology
TrustArc Webinar - 2024 Global Privacy Survey
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
Removing Uninteresting Bytes in Software Fuzzing
Imagine a world where software fuzzing, the process of mutating bytes in test seeds to uncover hidden and erroneous program behaviors, becomes faster and more effective. A lot depends on the initial seeds, which can significantly dictate the trajectory of a fuzzing campaign, particularly in terms of how long it takes to uncover interesting behaviour in your code. We introduce DIAR, a technique designed to speedup fuzzing campaigns by pinpointing and eliminating those uninteresting bytes in the seeds. Picture this: instead of wasting valuable resources on meaningless mutations in large, bloated seeds, DIAR removes the unnecessary bytes, streamlining the entire process.
In this work, we equipped AFL, a popular fuzzer, with DIAR and examined two critical Linux libraries -- Libxml's xmllint, a tool for parsing xml documents, and Binutil's readelf, an essential debugging and security analysis command-line tool used to display detailed information about ELF (Executable and Linkable Format). Our preliminary results show that AFL+DIAR does not only discover new paths more quickly but also achieves higher coverage overall. This work thus showcases how starting with lean and optimized seeds can lead to faster, more comprehensive fuzzing campaigns -- and DIAR helps you find such seeds.
- These are slides of the talk given at IEEE International Conference on Software Testing Verification and Validation Workshop, ICSTW 2022.
Full-RAG: A modern architecture for hyper-personalization
Mike Del Balso, CEO & Co-Founder at Tecton, presents "Full RAG," a novel approach to AI recommendation systems, aiming to push beyond the limitations of traditional models through a deep integration of contextual insights and real-time data, leveraging the Retrieval-Augmented Generation architecture. This talk will outline Full RAG's potential to significantly enhance personalization, address engineering challenges such as data management and model training, and introduce data enrichment with reranking as a key solution. Attendees will gain crucial insights into the importance of hyperpersonalization in AI, the capabilities of Full RAG for advanced personalization, and strategies for managing complex data integrations for deploying cutting-edge AI solutions.
“I’m still / I’m still / Chaining from the Block”
“An Outlook of the Ongoing and Future Relationship between Blockchain Technologies and Process-aware Information Systems.” Invited talk at the joint workshop on Blockchain for Information Systems (BC4IS) and Blockchain for Trusted Data Sharing (B4TDS), co-located with with the 36th International Conference on Advanced Information Systems Engineering (CAiSE), 3 June 2024, Limassol, Cyprus.
CAKE: Sharing Slices of Confidential Data on Blockchain
Presented at the CAiSE 2024 Forum, Intelligent Information Systems, June 6th, Limassol, Cyprus.
Synopsis: Cooperative information systems typically involve various entities in a collaborative process within a distributed environment. Blockchain technology offers a mechanism for automating such processes, even when only partial trust exists among participants. The data stored on the blockchain is replicated across all nodes in the network, ensuring accessibility to all participants. While this aspect facilitates traceability, integrity, and persistence, it poses challenges for adopting public blockchains in enterprise settings due to confidentiality issues. In this paper, we present a software tool named Control Access via Key Encryption (CAKE), designed to ensure data confidentiality in scenarios involving public blockchains. After outlining its core components and functionalities, we showcase the application of CAKE in the context of a real-world cyber-security project within the logistics domain.
Paper: https://doi.org/10.1007/978-3-031-61000-4_16
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Are you ready to revolutionize how you handle data? Join us for a webinar where we’ll bring you up to speed with the latest advancements in Generative AI technology and discover how leveraging FME with tools from giants like Google Gemini, Amazon, and Microsoft OpenAI can supercharge your workflow efficiency.
During the hour, we’ll take you through:
Guest Speaker Segment with Hannah Barrington: Dive into the world of dynamic real estate marketing with Hannah, the Marketing Manager at Workspace Group. Hear firsthand how their team generates engaging descriptions for thousands of office units by integrating diverse data sources—from PDF floorplans to web pages—using FME transformers, like OpenAIVisionConnector and AnthropicVisionConnector. This use case will show you how GenAI can streamline content creation for marketing across the board.
Ollama Use Case: Learn how Scenario Specialist Dmitri Bagh has utilized Ollama within FME to input data, create custom models, and enhance security protocols. This segment will include demos to illustrate the full capabilities of FME in AI-driven processes.
Custom AI Models: Discover how to leverage FME to build personalized AI models using your data. Whether it’s populating a model with local data for added security or integrating public AI tools, find out how FME facilitates a versatile and secure approach to AI.
We’ll wrap up with a live Q&A session where you can engage with our experts on your specific use cases, and learn more about optimizing your data workflows with AI.
This webinar is ideal for professionals seeking to harness the power of AI within their data management systems while ensuring high levels of customization and security. Whether you're a novice or an expert, gain actionable insights and strategies to elevate your data processes. Join us to see how FME and AI can revolutionize how you work with data!
Recently uploaded (20)
Generating privacy-protected synthetic data using Secludy and Milvus
Generating privacy-protected synthetic data using Secludy and Milvus
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
Mind map of terminologies used in context of Generative AI
Mind map of terminologies used in context of Generative AI
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Things to Consider When Choosing a Website Developer for your Website | FODUU
Things to Consider When Choosing a Website Developer for your Website | FODUU
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Full-RAG: A modern architecture for hyper-personalization
Full-RAG: A modern architecture for hyper-personalization
CAKE: Sharing Slices of Confidential Data on Blockchain
CAKE: Sharing Slices of Confidential Data on Blockchain
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Introduction to nanoWatt XLP: PIC18F46J50
- 8. Industry Standard Performance Benchmarks Energy Consumption Note: Competitor 16-bit family at 16 MIPS Vdd=3.3V, Typical values for Idd PIC24F16KA102 family at 16 MIPS using MPLAB C Compiler for PIC24F with Opimization level O3 – Vdd=3.3V, Typical values for Idd
- 11. nanoWatt XLP™ Technology Portfolio
- 12. nanoWatt XLP™ MCU Portfolio PIC MCU Flash Memory KB Pins Sleep (nA) Deep Sleep (nA) WDT* (nA) RTC* (nA) 1MHz Run (µA) PIC16LF72X 3.5-14 28/44 20 - 500 500 110 PIC16LF193X (LCD) 7-28 28/44 60 - 500 600 150 PIC18F1XK50 8-16 20 24 - 450 790 170 PIC18F14K22 8-16 20 34 - 460 650 150 PIC18FXXK20 8-64 28/44 100 - 600 600 300 PIC18(L)F46J11 16-64 28/44 54 13 813 813 272 PIC18(L)F46J50 16-64 28/44 54 13 813 813 272 PIC24F16KA102 (Cap Touch) 8-16 20/28 25 20 420 520 195
- 14. PIC18F46J50 Connection Details Block Diagram Connecting different Blocks
- 15. Memory Maps For PIC18F46J50 Memory Maps For PIC18F46J50
- 16. Parallel Master Port (PMP) PMP Module Block Diagram
- 17. Universal Serial Bus (USB) Usb Peripheral And Options
- 19. PIC18F46J50 Family Interrupt Logic Interrupt Logic BLOCK DIAGRAM