This document discusses transportation engineering. It describes transportation engineering as involving planning, design, operation, and facilities management using scientific principles to develop transportation that is safe, efficient, rapid, comfortable, economical and eco-friendly. The four main modes of transportation discussed are road, water, air and railway. Transportation engineering involves urban planning, design, construction, maintenance and management of facilities. Sections on industry, society, economics and the environment are also developed. The document goes on to classify transportation based on energy source (human, animal, fuel) and surface (land, water, air) and provides examples. It discusses the history and developments of different modes of transportation like railways, water, and air transportation. It concludes with discussions
Detailed description of Capacity and Level of service of Multi lane highways based on Highway Capacity Manual (HCM2010) along with one example for finding LOS of a highway
Capacity & Level of Service: Highways & Signalized Intersections (Indo-HCM)Vijai Krishnan V
This presentation gives a glimpse on estimating the capacity and Level of Service (LOS) of highway midblock sections and signalized intersections under heterogeneous traffic conditions using the Indo-HCM 2017 Manual. It also compares the Indo-HCM LOS estimation methods with US-HCM. Some practice questions are also included.
I acknowledge the co-author Ms. Sethulakshmi G (Ph. D. Scholar, NIT Surathkal) for her valuable contribution to this presentation.
Detailed description of Capacity and Level of service of Multi lane highways based on Highway Capacity Manual (HCM2010) along with one example for finding LOS of a highway
Capacity & Level of Service: Highways & Signalized Intersections (Indo-HCM)Vijai Krishnan V
This presentation gives a glimpse on estimating the capacity and Level of Service (LOS) of highway midblock sections and signalized intersections under heterogeneous traffic conditions using the Indo-HCM 2017 Manual. It also compares the Indo-HCM LOS estimation methods with US-HCM. Some practice questions are also included.
I acknowledge the co-author Ms. Sethulakshmi G (Ph. D. Scholar, NIT Surathkal) for her valuable contribution to this presentation.
ISCF Future Flight Networking Event - Use casesKTN
This webcast covers the physical, virtual & technology operations already in existence or in planning that can support an integrated aviation system. Areas to consider will be flight corridors for experimentation/feasibility/demo flights, regional connectivity in island and remote communities, the demonstration of drones or air taxis, the demonstration of a partially integrated system and the use of drones to deliver vital health care services.
The aim of the this event is to:
- Convene interested parties to enable new collaborations to form
- Raise awareness of the successful applicants from Phase I (as they will lead the consortia for Phase II)
- Attract non-traditional aviation companies to Future Flight
- Inform on the capabilities and expertise on offer to support your Future Flight project
Future Flight is a £125m Industrial Strategy Challenge Programme seeking to demonstrate novel aviation systems to completely transform the way we move people and goods. The programme seeks to demonstration a fully integrated system in 2024 delivered by large consortia of mixed expertise.
Find out more: https://ktn-uk.co.uk/news/future-flight-workshops
Logistics meaning, objective, evolution of transportation, components of supply chain, principle of transportation, logistics activities, meaning of Road ,marine ,air, transportation, type, advantage and disadvantage.
PARAMETRIC ANALYSIS OF DECISION MAKING FOR A NEW ROADWAY 62PlacementStuffTamil
After learning the basics secondly, we studied about the problems faced on
the current road route or the present road which were influencing in the decision
making of a new roadway for the betterment of the transport facility. Among all
the problems discussed, traffic congestion is the most non tolerable issue which
not only effects the lifestyle of the common man but also impacts significantly on
economy by decreasing the productivity of the work force of the nation. Apart
from the economic effect, the impact on the environment has also been evaluated
by using the carbon footprint method. As these further effects the human race
causing several health problems with severe results in long run.
Also, with the use of word traffic congestion a question arises in the mind, actually
it is measured that traffic flow is normal or having congestion. So, the term traffic
density (which measures the real time count of the vehicles per unit length on a
given road stretch) has also been discussed with its different methods of
calculation.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Similar to Transportation Engineering Presentation (20)
Vaccine management system project report documentation..pdfKamal Acharya
The Division of Vaccine and Immunization is facing increasing difficulty monitoring vaccines and other commodities distribution once they have been distributed from the national stores. With the introduction of new vaccines, more challenges have been anticipated with this additions posing serious threat to the already over strained vaccine supply chain system in Kenya.
Democratizing Fuzzing at Scale by Abhishek Aryaabh.arya
Presented at NUS: Fuzzing and Software Security Summer School 2024
This keynote talks about the democratization of fuzzing at scale, highlighting the collaboration between open source communities, academia, and industry to advance the field of fuzzing. It delves into the history of fuzzing, the development of scalable fuzzing platforms, and the empowerment of community-driven research. The talk will further discuss recent advancements leveraging AI/ML and offer insights into the future evolution of the fuzzing landscape.
Event Management System Vb Net Project Report.pdfKamal Acharya
In present era, the scopes of information technology growing with a very fast .We do not see any are untouched from this industry. The scope of information technology has become wider includes: Business and industry. Household Business, Communication, Education, Entertainment, Science, Medicine, Engineering, Distance Learning, Weather Forecasting. Carrier Searching and so on.
My project named “Event Management System” is software that store and maintained all events coordinated in college. It also helpful to print related reports. My project will help to record the events coordinated by faculties with their Name, Event subject, date & details in an efficient & effective ways.
In my system we have to make a system by which a user can record all events coordinated by a particular faculty. In our proposed system some more featured are added which differs it from the existing system such as security.
CFD Simulation of By-pass Flow in a HRSG module by R&R Consult.pptxR&R Consult
CFD analysis is incredibly effective at solving mysteries and improving the performance of complex systems!
Here's a great example: At a large natural gas-fired power plant, where they use waste heat to generate steam and energy, they were puzzled that their boiler wasn't producing as much steam as expected.
R&R and Tetra Engineering Group Inc. were asked to solve the issue with reduced steam production.
An inspection had shown that a significant amount of hot flue gas was bypassing the boiler tubes, where the heat was supposed to be transferred.
R&R Consult conducted a CFD analysis, which revealed that 6.3% of the flue gas was bypassing the boiler tubes without transferring heat. The analysis also showed that the flue gas was instead being directed along the sides of the boiler and between the modules that were supposed to capture the heat. This was the cause of the reduced performance.
Based on our results, Tetra Engineering installed covering plates to reduce the bypass flow. This improved the boiler's performance and increased electricity production.
It is always satisfying when we can help solve complex challenges like this. Do your systems also need a check-up or optimization? Give us a call!
Work done in cooperation with James Malloy and David Moelling from Tetra Engineering.
More examples of our work https://www.r-r-consult.dk/en/cases-en/
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...Dr.Costas Sachpazis
Terzaghi's soil bearing capacity theory, developed by Karl Terzaghi, is a fundamental principle in geotechnical engineering used to determine the bearing capacity of shallow foundations. This theory provides a method to calculate the ultimate bearing capacity of soil, which is the maximum load per unit area that the soil can support without undergoing shear failure. The Calculation HTML Code included.
Saudi Arabia stands as a titan in the global energy landscape, renowned for its abundant oil and gas resources. It's the largest exporter of petroleum and holds some of the world's most significant reserves. Let's delve into the top 10 oil and gas projects shaping Saudi Arabia's energy future in 2024.
Automobile Management System Project Report.pdfKamal Acharya
The proposed project is developed to manage the automobile in the automobile dealer company. The main module in this project is login, automobile management, customer management, sales, complaints and reports. The first module is the login. The automobile showroom owner should login to the project for usage. The username and password are verified and if it is correct, next form opens. If the username and password are not correct, it shows the error message.
When a customer search for a automobile, if the automobile is available, they will be taken to a page that shows the details of the automobile including automobile name, automobile ID, quantity, price etc. “Automobile Management System” is useful for maintaining automobiles, customers effectively and hence helps for establishing good relation between customer and automobile organization. It contains various customized modules for effectively maintaining automobiles and stock information accurately and safely.
When the automobile is sold to the customer, stock will be reduced automatically. When a new purchase is made, stock will be increased automatically. While selecting automobiles for sale, the proposed software will automatically check for total number of available stock of that particular item, if the total stock of that particular item is less than 5, software will notify the user to purchase the particular item.
Also when the user tries to sale items which are not in stock, the system will prompt the user that the stock is not enough. Customers of this system can search for a automobile; can purchase a automobile easily by selecting fast. On the other hand the stock of automobiles can be maintained perfectly by the automobile shop manager overcoming the drawbacks of existing system.
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)MdTanvirMahtab2
This presentation is about the working procedure of Shahjalal Fertilizer Company Limited (SFCL). A Govt. owned Company of Bangladesh Chemical Industries Corporation under Ministry of Industries.
Overview of the fundamental roles in Hydropower generation and the components involved in wider Electrical Engineering.
This paper presents the design and construction of hydroelectric dams from the hydrologist’s survey of the valley before construction, all aspects and involved disciplines, fluid dynamics, structural engineering, generation and mains frequency regulation to the very transmission of power through the network in the United Kingdom.
Author: Robbie Edward Sayers
Collaborators and co editors: Charlie Sims and Connor Healey.
(C) 2024 Robbie E. Sayers
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
TECHNICAL TRAINING MANUAL GENERAL FAMILIARIZATION COURSEDuvanRamosGarzon1
AIRCRAFT GENERAL
The Single Aisle is the most advanced family aircraft in service today, with fly-by-wire flight controls.
The A318, A319, A320 and A321 are twin-engine subsonic medium range aircraft.
The family offers a choice of engines
3. What is the Transportation Engineering ?
Scientific Principles
Planning
functional design
operation
facilities management.
Qualities of Transportation Engineering
Safe
Efficient
Rapid
Comfortable
Economical
Eco-friendly
Four main modes of Transportation Engineering
1. Road
2. Water
3. Air
4. Railway
Transportation Engineering involves
urban planning
design
construction
maintenance
management of transportation facilities
Sections are developed
Industrial
Social
Economic
Various influential Sections
Environmental
Social
economic
What is the Transport?
4. Classification of Transportation
Classification based on energy
a)Human energy
b)Animal energy
c)Petrol-Diesel energy
d)Steam energy
e)Electric energy
Classification based on surface
a) Land Transport
E.g. – Roadways, Railways,
Cableways, etc.
b) Water Transport
E.g.- Lake ways, Canal ways,
Riverways, Seaways, etc.
c) Air Transport
E.g.- Airways
50. The future of rail includes a base scenario that projects
the evolution of the railways sector to 2050 on the basis
of announced policies, regulations and projects. It also
include s a high rail scenario to demonstrate the energy
and environmental benefits of a more significant shift
of passengers and goods to rail transport. While the
high rail scenario requires about 60% more investment
than in the base scenario ,global CO2 emissions from
transportation peak in the late 2030 air pollution is
reduced and oil demand is lowered.
51.
52.
53.
54. As the transportation industry continues to grow the
sector concentrating on providing innovative
solutions to meet the emerging needs of future air
travel passengers and market demands. They are also
addressing issues concerning costs , safety security
and environmental impacts .New technological
advances are creating many possible future to
make the civil aviation industry sustainable.
3.Air transportation in future
55.
56. Self driving cars are expected to be on the roads more quickly than
was anticipated just a few years ago and in greater numbers .
Forecast vary ,as they always do , but the emerging consensus among
the industry’s auger players is that minimum ,feel vehicles -trucks
taxis and buses that can take control and make decisions .i.e. SEA
level 3 ,will be in use the end of this decade .More recent into the
industry like Teals and the Delphi Mobileye partnership believe fully
autonomous vehicles, i.e. SEA 4 or 5 , will be available around the
same time ; Nu Toney ,a start up spun out of MIT, is already
conducting roads trails in Singapore.
