This document summarizes a hydroponics chamber model ACM-5263H produced by Technocracy Pvt. Ltd. The chamber provides an environment for plant growth without soil by using a nutrient solution. It has lights, air circulation, and other features to control temperature, humidity, and carbon dioxide levels to enable optimal plant growth. The chamber is portable, low maintenance, and more cost effective than other options due to its small size. It is well insulated and has precise temperature and environmental controls.

1. TECHNOCRACY PVT. LTD.
R
HYDROPONICS
CHAMBER
MODEL NO. - ACM- 5263H

2. TECHNOCRACY PVT. LTD.
Hydroponics is a processofnurturing plants in an aerated solution of nutrients without soil. The roots are
submerged into a dilute solution rich in either organic or inorganic nutrients supplying adequate nutrients to
the plants. Commonly known as the nutrient-solution culture, this method has taken different names such as
water, culture, gravel culture and nutri-culture to name a few.
Weiber Hydroponics chamber is a BOONplant growerand the chambers consume limited space. Our
hydroponic chamber provides optimum growth variables to the plants from beginning of the germination
process till transplant. The fact that soil and growth space is not required in considerable amount, has made
this chamber the most sought after by plant growers. For plant growers who are looking at inexpensive and
viable chambers with lesser space occupancy Weiber hydroponics chambers is the right choice. In other
words, have your own mini greenhouse inside the Weiber hydroponic chamber.
R
HYDROPONICS CHAMBER

3. TECHNOCRACY PVT. LTD.
R
There is a hydroponics nutrient reservoir with a lid inside the chamber. The lid has enough built in capacity,
can be customised as per number of hydroponics applications for the plants to be grown.Enough lights fitted
on the top of chamber provide solar energy to the plants to enable photosynthesis. The whole cabinet is lined
with foil to reflect light in order to retain it within the system and to maximize chamber’s efficiency. An air stone
is used to continuously aerate and oxygenate the nutrient solution. To ensure right growth the micronutrient is
to be replaced approximately every 2 weeks to allowany specific micronutrients utilized by plants for
replenishing.
SALIENT FEATURES
Ÿ Low maintenance
Ÿ Portable
Ÿ Budget friendly as compared to others
Ÿ Financially viable
Ÿ Convenient Installation
Ÿ Long lasting and handy design
CONSTRUCTION
Chamber Body: is a double walled, heated and a convection unit, with the outer proofing wall made up of
powder coated PCRC sheets and the inner wall made of grade 304 stainless.
Insulation: retards the flow of heat and this process reduce the heat loss or gain for energy conservation thus
saving the energy. Weiber thermal shock chamber provides insulation either through fibrous insulation i.e.
mineral glass wool or through cellular insulation i.e. polyurethane foam (PUF).
Fibrous Insulation: Composed of air finely divided into interstices by small diameter fibers usually
chemically or mechanically bonded and formed into boards, blankets, and hollow cylinders.
Cellular Insulation: Composed of air or gas contained within foam of stable bubbles and formed into boards,
blankets, or hollow cylinders.

4. TECHNOCRACY PVT. LTD.
R
Heating: desired positive temperature is provided through stainless steel sheathed air heaters, these heaters
do not affect the test specimen directly as they are placed in conditioning plenum proving indirect heat.
Air Circulation: air circulation efficient motor fans are provided, ensuring uniform temperature throughout
the chamber.
Cooling: negative temperature is maintained through ultra low temperature application compressor and non
CFC eco friendly R 404a refrigerant used.
Refrigeration: it is provided through hermetic and half-hermetic compressor cascade refrigeration system.
Hermetic compressor is completely sealed, especially against the escape or entry of air and semi-hermetic
compressor is partially sealed units and these units are mainly utilizes for real refrigeration work.
Controller: Microprocessor PID controller
Temperature Range: 5°C to 50°C (without irradiation)
10°C to 50°C (with irradiation)
Temperature Sensitivity: temperature inside the chamber is controlled with a sensitivity of + 1oC
Temperature Sensor: PT 100
Humidity Range: 20% to 80% relative humidity
CO2 Range: 300-5,000 ppm
Co2 Sensor: Nondispersive infrared (NDIR) gas sensors, it is a highly integrated analysis system for
monitoring respiratory carbon dioxide concentration.
Temperature Control: The temperature is efficiently controlled by PLC based HMI interactive control panel

5. We manufactures both
Standard And Customized
Test Chambers
TECHNOCRACY PVT. LTD.
R

6. SALES OFFICE (HONG KONG)
SHOWROOM
SALES OFFICE (RUSSIA)
Unit D 28 11/F Wing Tat Comm,Bidg 97, Bonham Strand East,
Sheung Wan, Hong Kong (PRC)
Tel.: 0086-13929598046 0086- 18922303099
E-mail.: hk@acmasindia.com
J-284 Sector 1 Bawana Industrial Estate, Bawana,
Delhi, INDIA-110039
Tel.: 0091-0-9312219738 (M) +91- 9717741167
E-mail.: info@acmasindia.com
Inmed Trade Street Ozerkovsky Embankment,
Unit No 50, Straine- 1, Off- 502, Moscow, Russia
E-mail.: info@acmasindia.com
Tel.: 0049- 79592345 | Email: russia@acmasindia.com
TECHNOCRACY PVT. LTD.
www.acmasindia.com | www.cleanroom-equipments.com | www.test-chambers.com
An ISO 9001 : 2208 | ISO 14001 : 2008 | ISO 13485
WHO: GMP Products | GLP Compliant Products
SALES OFFICE (INDIA)
th
Office no. 506 & 507, 5 Floor, Plot no.- C-9,
Pearls Best Height-II, Netaji Subhash Place,
Pitam Pura, Delhi- 110034
Land Line No.: +91 - 11- 47619688,
Fax: +91-11-47619788
E-mail.: info@acmasindia.com