Guiding shoe
•Download as PPTX, PDF•
1 like•405 views
World Health Organization reveals that 14% of people in the world Visually Impaired.Blind people use a stick as a tool for directing them when they move or walk.In our INDIA not so much advanced technologies and equipments use for blind people and very less number of products launched in India.Here the Guiding Shoes for blind people are going to be developed which makes them not to carry the stick.The Guiding Shoes implementation involves Ultrasonic Sensors,Infrared Sensors,Raspberry pi,Rain detecting Sensor,Vibrating Motors and Piezoelectic Buzzer.The above mentioned sensors detects the objects,holes,muds etc and the vibrating motors and buzzers will alert the bl ind person through raspberry pi.The proposed method will have more advantages rather than using white stick. Let make the world innovative......
Report
Share
Report
Share
Recommended
Blind shoes
The document describes a navigational shoe system for blind persons. The proposed system uses vibration motors in shoes connected to a microcontroller and Bluetooth module. An Android app and the blind person's mobile phone GPS would provide location coordinates to the microcontroller. The microcontroller would then vibrate the motors in the shoes to guide the blind person along the route from their starting point to their destination. This navigation system is intended to help blind persons travel independently without needing to refer to sign boards for route information.
Smart walking Stick for blinds
voice assistive smart walking stick for blinds using IR sensor, voice recording module, GPS and GSM Techniques
Development of smart cane for blind people
The document describes the development of a Smart Cane to assist visually impaired individuals. It discusses:
1) Limitations of traditional white canes in detecting overhead obstacles which can cause injuries.
2) Studying commercially available electronic travel aids (ETAs) and learning that users prefer lightweight, one-handed devices that don't obscure environmental sounds.
3) The evolution of the Smart Cane prototype, which uses ultrasonic sensors to detect obstacles and vibrations to provide feedback, through multiple versions based on user testing to refine the design.
4) Conducting field trials across multiple cities in India with over 80 users to evaluate the Smart Cane design and gather feedback.
Advance shoes for blind people
This document describes a project to develop advanced shoes for blind people using ultrasonic sensors. The shoes will have ultrasonic sensors that detect nearby objects and alert the wearer through a buzzer or vibrating motor. When an object is detected within a certain distance, the microcontroller will activate the buzzer or motor to notify the blind person. The goal is to provide blind people with a more efficient mobility aid than a traditional white cane. Components include ultrasonic sensors, a microcontroller, buzzer, vibrating motor, battery, and shoes. Future work may involve integrating GPS to provide navigation assistance.
Automatic street light control using ldr PPT
This document describes an automatic street light control circuit using an LDR (light dependent resistor). The circuit uses an LDR, resistors, capacitors, diodes, a transistor and relay to automatically turn on LED street lights when it gets dark. When the LDR detects a drop in light levels, it causes the transistor to switch on, powering the relay and turning on the lights. The circuit requires few components, consumes little power and provides an efficient automatic method for controlling street lights without manual operation.
SMART BLIND STICK
This device is very useful for the people who surfering with eye blindness and this can able to detect the obstacles with the help of ultrasonic sensor.
Fire fighting robot ppt
The document describes an automatic firefighting robot that can detect and extinguish fires. It uses sensors to detect temperature, smoke, and flames. If the sensors detect a fire, the microcontroller activates a water pump to extinguish it. The robot reduces human labor needed for firefighting and decreases damage from fires. It is designed to monitor hazardous areas for natural disasters and bomb explosions.
Sensor Technology ppt
This document provides an overview of sensors. It defines a sensor as a device that measures a physical quantity and converts it into a signal. It gives examples of common sensors like infrared sensors used in hotels and taps, and photoelectric sensors used in street lights and automatic stairs. The document outlines the uses of sensors in various applications like cars, machines, aerospace, medicine and more. It concludes by describing ideal properties of sensors like being sensitive only to the measured property and not influencing it.
Recommended
Blind shoes
The document describes a navigational shoe system for blind persons. The proposed system uses vibration motors in shoes connected to a microcontroller and Bluetooth module. An Android app and the blind person's mobile phone GPS would provide location coordinates to the microcontroller. The microcontroller would then vibrate the motors in the shoes to guide the blind person along the route from their starting point to their destination. This navigation system is intended to help blind persons travel independently without needing to refer to sign boards for route information.
Smart walking Stick for blinds
voice assistive smart walking stick for blinds using IR sensor, voice recording module, GPS and GSM Techniques
Development of smart cane for blind people
The document describes the development of a Smart Cane to assist visually impaired individuals. It discusses:
1) Limitations of traditional white canes in detecting overhead obstacles which can cause injuries.
2) Studying commercially available electronic travel aids (ETAs) and learning that users prefer lightweight, one-handed devices that don't obscure environmental sounds.
3) The evolution of the Smart Cane prototype, which uses ultrasonic sensors to detect obstacles and vibrations to provide feedback, through multiple versions based on user testing to refine the design.
4) Conducting field trials across multiple cities in India with over 80 users to evaluate the Smart Cane design and gather feedback.
Advance shoes for blind people
This document describes a project to develop advanced shoes for blind people using ultrasonic sensors. The shoes will have ultrasonic sensors that detect nearby objects and alert the wearer through a buzzer or vibrating motor. When an object is detected within a certain distance, the microcontroller will activate the buzzer or motor to notify the blind person. The goal is to provide blind people with a more efficient mobility aid than a traditional white cane. Components include ultrasonic sensors, a microcontroller, buzzer, vibrating motor, battery, and shoes. Future work may involve integrating GPS to provide navigation assistance.
Automatic street light control using ldr PPT
This document describes an automatic street light control circuit using an LDR (light dependent resistor). The circuit uses an LDR, resistors, capacitors, diodes, a transistor and relay to automatically turn on LED street lights when it gets dark. When the LDR detects a drop in light levels, it causes the transistor to switch on, powering the relay and turning on the lights. The circuit requires few components, consumes little power and provides an efficient automatic method for controlling street lights without manual operation.
SMART BLIND STICK
This device is very useful for the people who surfering with eye blindness and this can able to detect the obstacles with the help of ultrasonic sensor.
Fire fighting robot ppt
The document describes an automatic firefighting robot that can detect and extinguish fires. It uses sensors to detect temperature, smoke, and flames. If the sensors detect a fire, the microcontroller activates a water pump to extinguish it. The robot reduces human labor needed for firefighting and decreases damage from fires. It is designed to monitor hazardous areas for natural disasters and bomb explosions.
Sensor Technology ppt
This document provides an overview of sensors. It defines a sensor as a device that measures a physical quantity and converts it into a signal. It gives examples of common sensors like infrared sensors used in hotels and taps, and photoelectric sensors used in street lights and automatic stairs. The document outlines the uses of sensors in various applications like cars, machines, aerospace, medicine and more. It concludes by describing ideal properties of sensors like being sensitive only to the measured property and not influencing it.
ppt.pptx
This document describes an IOT-based anti-theft flooring mat system. The system uses piezo sensors embedded in floor tiles that detect intruders stepping on the tiles. When pressure is applied, the sensors activate a transmitter to send a notification to the IOT system. The system is powered by a NodeMCU processor and includes an OLED display and solenoid lock. It provides real-time intruder alerts to homeowners through mobile phone updates. The system aims to effectively identify human intruders and reduce response time compared to existing solutions.
Smart blind
This document describes a smart blind stick that uses ultrasonic sensors and a buzzer to help blind people navigate and detect obstacles. The stick contains components like a battery, Arduino board, sensors and buzzer. It can detect obstacles, provide alerts for turns and dips, and help blind people easily walk to their destination in a more efficient manner than a traditional white cane. Future improvements could involve adding GPS for navigation assistance and emergency alerts.
Smart Blind Stick for Blind Peoples
The smart blind stick is an assistive device that uses ultrasonic sensors and a microcontroller to help blind people navigate and detect obstacles. It contains an 8051 microcontroller, ultrasonic sensor, buzzer, and power supply. The microcontroller is programmed using C language to detect obstacles and alert the user with audible signals from the buzzer. It can help blind people walk safely and avoid obstacles by auto-detecting the surroundings and providing turn and obstacle alerts. Future improvements could include adding GPS for navigation assistance and GSM for emergency calls.
Wearable technology
This document provides an introduction and overview of wearable technology. It discusses the history of wearable technology dating back to the 1960s and highlights some of the early prototypes. It also outlines the typical architecture of a wearable device system. Examples of current wearable technologies are given, such as smart watches, Google Glass, and activity trackers. Potential applications in healthcare, security, sports and other fields are mentioned. Advantages of wearables include being user friendly and collecting data hands-free, while disadvantages include small displays and need to enter data while interacting. The document concludes that wearable computing is an emerging technology that will make computers more integrated into work processes.
Smart Blind Stick using Arduino
This paper describes ultrasonic blind walking stick with the use of arduino. According to WHO, Visually impaired can range from mild severe. Worldwide, between 300 million people are visually impaired due to various causes just about 50 million People are totally Blind in the order of 80 of blindness occurs in people over 50years of age. If u notice them , you can very well know about it they can’t walk without the help of other. For Blind People without Any Support Its very Difficult to reach there. They faces many problems in their daily routine day to day life. revelation loss was linked by means of suicidal thoughts of suicide attempts, in a new study from south Korea. “People with visual harm often suffer substantial psychosocial consequences,†the authors wrote in the British Journal Of Ophthalmology. Ophthalmology is a branch of medicine and surgery which deals with the diagnosis and treatment of eye disorders. Shobhana Sonwane | Priyanka Gaidhane | Diksha Mohane | Nikita Gajbhiye | Akansha Patil | Tasneem Hasan "Smart Blind Stick using Arduino" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-3 , April 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30754.pdf Paper Url :https://www.ijtsrd.com/engineering/computer-engineering/30754/smart-blind-stick-using-arduino/shobhana-sonwane
child security wearable device ppt
This presentation includes what is child security wearable device ,Existing system and proposed system,Advantages and Disadvantages of the system and how its works,results and future scope and at last conclusion..
Password Based Circuit Breaker
This password based circuit breaker is built by using 8051 mirocontroller to control a circuit breaker with help of a password only. It provides a solution for the safety of maintenance staff like lineman.
Edgefxkits.com has a wide range of electronic projects ideas that are primarily helpful for ECE, EEE and EIE students and the ideas can be applied for real life purposes as well.
Edgefx provides free verified electronic projects kits around the world with abstracts, circuit diagrams, and free electronic software. We provide guidance manual for Do It Yourself Kits (DIY) with the modules at best price along with free shipping
final project ppt
The document describes a voice-based alert system for blind people using ultrasonic sensors. The system is designed by a team with T. Srinivas Reddy as the guide. It uses an LPC1343 cortex M3 microcontroller connected to ultrasonic sensors and a buzzer. The sensors detect obstacles and the microcontroller triggers voice alerts or buzzer sounds. The system aims to help blind people navigate safely in a low-cost and low-power design.
Smart Home Automation And security System
This document discusses using internet of things (IOT) for home automation and security systems. It describes using voice commands, remote control, motion sensors, and other components like Arduino, Bluetooth, and sensors to control lighting, air conditioning, appliances. Potential limitations are discussed like unreliable sonar sensors or needing an internet connection. Future work focuses on upgrading components and simplifying the setup process.
Electronic' skin monitors heart, brain function
The document discusses electronic skin, a new ultra-thin electronic device that can attach to the skin like a temporary tattoo. It can measure vital signs like electrical heart activity and brain waves. Researchers developed it to reduce wires and make medical monitoring more compact. Electronic skin uses tiny sensors and a "spider web" circuitry design made of silicon filaments. It transmits the recorded body signals to a receiver. Researchers believe it could one day control virtual screens to monitor health and even stimulate skin for smart bandages.
Location Finding for blind People Using Voice Navigation Stick Seminar
The voice navigation stick used by the blind people makes use of Ultrasonic and IR sensors to detect obstacles, it also makes use of the GPS system to enhance navigation with the help of speakers, that enables the blind to be independent.
VOICE OPERATED WHEELCHAIR
This document describes a project to build a voice-operated wheelchair for physically disabled persons. The objective is to design hardware for voice recognition and corresponding wheelchair actions. Group members include Mandar Jadhav, Mayuresh Todkar and Dayanand Patil, guided by Dr. V. Jayashree. The system is aimed to help those paralyzed below the neck or with quadriplegia. It will allow independent wheelchair movement through voice commands without need for personal assistance. The design uses a microphone, voice recognition IC, microcontroller, motor drivers and batteries to power DC motors for forward, reverse, left and right wheelchair movement.
Home automation with arduino
This document describes a student project to create a Bluetooth-based home automation system using an Arduino. The system allows controlling electrical devices in a home remotely using a smartphone. It discusses the components used - Arduino UNO, Bluetooth module, relay module, software. The document provides details on each component and how they work together with a block diagram and circuit diagram. It aims to automate home appliances and reduce human effort for tasks like switching on lights or fans.
CHILD SAFETY WEARABLE DEVICE
This document describes a proposed child safety wearable device that uses SMS communication to allow parents to locate their children. The device would include a GSM module to send SMS location data, a GPS sensor to detect location, temperature, UV and SOS light sensors, and an alarm buzzer. It aims to help parents easily locate children in crowded areas by sending an SMS to get the child's location, temperature, or activate an alarm. The device provides real-time monitoring of a child's surroundings while being low-cost and using widely available SMS technology.
IoT BASED SMART HOME USING ARDUINO
This is an energy efficient smart home using internet of things and Arduino. This is just a design part.
All about WEARABLE TECHNOLOGY...By..GEORGE KURIAN POTTACKAL
This document discusses wearable technology. It begins with an introduction that defines wearable technology as small portable computers designed to be worn on the body, often including health and fitness tracking. The document then covers the history of wearable technology from the 1960s to today. It describes the architecture and components of wearable devices including input devices, displays, and networks. Examples of wearable technologies are discussed like smart watches and smart glasses. Applications are wearable computing, healthcare monitoring, and fashion. Advantages include convenience and flexibility while disadvantages include limited battery life and potential health issues. The future of wearables is discussed as dominating personal electronics.
Wearable Biosensors Report
The document is a special study report submitted by Shubham Madhukar Rokade to North Maharashtra University for their Bachelor of Engineering degree. It discusses wearable bio-sensors, including ring sensors and smart shirts. Ring sensors can continuously monitor heart rate and oxygen levels in an unobtrusive way using pulse oximetry. Smart shirts integrate sensors using optical fibers woven directly into the fabric to monitor vital signs without obstruction. The report provides details on the working, components, and applications of these wearable bio-sensing technologies.
automatic streetlight control using ldr ppt
This document describes an automatic street light control circuit using an LDR (Light Dependent Resistor). The circuit uses an LM358 operational amplifier, a relay, an LDR, resistors, a capacitor, a transistor, and a lamp. It works by turning the street light on when the LDR detects low light levels and turning it off when high light levels are detected, thereby automatically controlling the street light and saving energy. The circuit was designed and simulated using Proteus software and implemented on a breadboard.
New microsoft power point presentation
This document describes an Arduino-based ultrasonic navigation system for blind people. The system uses an ultrasonic sensor to detect obstacles and a buzzer to alert the blind user. When an obstacle is near, the buzzer sound increases in intensity to help the user navigate around the obstacle safely. The system aims to help blind individuals better access and navigate their environment.
THE THIRD EYE-Presentation
A student project aims to build a system that converts visual input into audio signals to help the blind or visually impaired navigate. The project's objectives are to develop a prototype device that uses image processing and computer vision techniques to detect objects and hazards, and converts that visual information into audio cues. The system would integrate technologies like image segmentation, enhancement, and 3D modeling with an acoustic interface to describe a user's surroundings. A Pandaboard single-board computer with OpenCV is used to process images from a webcam in real-time and translate them into audio descriptions for visually impaired users.
Design and Implementation of Ultrasonic Navigator for Visually Impaired
The document describes the design and implementation of an ultrasonic navigator device to help visually impaired people navigate their environment. The device uses ultrasonic sensors to detect obstacles in the environment and servo motors mounted on a glove to provide haptic feedback to the user about the distance and direction of obstacles. It also includes a GPS system to provide navigation instructions to help users reach their destinations. The device aims to provide more information about obstacles than a traditional walking cane by detecting objects in multiple directions and at distances over 1 meter.
Smart Walking Stick for Visually Challenged People
The man has been suffering with diseases and weired. Visually challenged people are blind people who are very common and difficult to deal with in their way. The main aim of this paper is to the visually challenged people with a better navigation tool. This smart walking stick is more sophisticated than a traditional walking stick. It uses a microcontroler to detect an obstacles in front, left, right side of a person. It is based on ultrasonic sensors for distance measurement property. For obstacle indication, there is voice playback which helps to mention a direction of obstacles around a visually challenged person by sensors. Along with this a receiver and buzzer placed on a stick .If the person missing a stick which can be find out by buzzer sound .This sound is induced when switch on a remote controller by visually challenged people .GPS also include in stick to find a visually challenged people.
More Related Content
What's hot
ppt.pptx
This document describes an IOT-based anti-theft flooring mat system. The system uses piezo sensors embedded in floor tiles that detect intruders stepping on the tiles. When pressure is applied, the sensors activate a transmitter to send a notification to the IOT system. The system is powered by a NodeMCU processor and includes an OLED display and solenoid lock. It provides real-time intruder alerts to homeowners through mobile phone updates. The system aims to effectively identify human intruders and reduce response time compared to existing solutions.
Smart blind
This document describes a smart blind stick that uses ultrasonic sensors and a buzzer to help blind people navigate and detect obstacles. The stick contains components like a battery, Arduino board, sensors and buzzer. It can detect obstacles, provide alerts for turns and dips, and help blind people easily walk to their destination in a more efficient manner than a traditional white cane. Future improvements could involve adding GPS for navigation assistance and emergency alerts.
Smart Blind Stick for Blind Peoples
The smart blind stick is an assistive device that uses ultrasonic sensors and a microcontroller to help blind people navigate and detect obstacles. It contains an 8051 microcontroller, ultrasonic sensor, buzzer, and power supply. The microcontroller is programmed using C language to detect obstacles and alert the user with audible signals from the buzzer. It can help blind people walk safely and avoid obstacles by auto-detecting the surroundings and providing turn and obstacle alerts. Future improvements could include adding GPS for navigation assistance and GSM for emergency calls.
Wearable technology
This document provides an introduction and overview of wearable technology. It discusses the history of wearable technology dating back to the 1960s and highlights some of the early prototypes. It also outlines the typical architecture of a wearable device system. Examples of current wearable technologies are given, such as smart watches, Google Glass, and activity trackers. Potential applications in healthcare, security, sports and other fields are mentioned. Advantages of wearables include being user friendly and collecting data hands-free, while disadvantages include small displays and need to enter data while interacting. The document concludes that wearable computing is an emerging technology that will make computers more integrated into work processes.
Smart Blind Stick using Arduino
This paper describes ultrasonic blind walking stick with the use of arduino. According to WHO, Visually impaired can range from mild severe. Worldwide, between 300 million people are visually impaired due to various causes just about 50 million People are totally Blind in the order of 80 of blindness occurs in people over 50years of age. If u notice them , you can very well know about it they can’t walk without the help of other. For Blind People without Any Support Its very Difficult to reach there. They faces many problems in their daily routine day to day life. revelation loss was linked by means of suicidal thoughts of suicide attempts, in a new study from south Korea. “People with visual harm often suffer substantial psychosocial consequences,†the authors wrote in the British Journal Of Ophthalmology. Ophthalmology is a branch of medicine and surgery which deals with the diagnosis and treatment of eye disorders. Shobhana Sonwane | Priyanka Gaidhane | Diksha Mohane | Nikita Gajbhiye | Akansha Patil | Tasneem Hasan "Smart Blind Stick using Arduino" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-3 , April 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30754.pdf Paper Url :https://www.ijtsrd.com/engineering/computer-engineering/30754/smart-blind-stick-using-arduino/shobhana-sonwane
child security wearable device ppt
This presentation includes what is child security wearable device ,Existing system and proposed system,Advantages and Disadvantages of the system and how its works,results and future scope and at last conclusion..
Password Based Circuit Breaker
This password based circuit breaker is built by using 8051 mirocontroller to control a circuit breaker with help of a password only. It provides a solution for the safety of maintenance staff like lineman.
Edgefxkits.com has a wide range of electronic projects ideas that are primarily helpful for ECE, EEE and EIE students and the ideas can be applied for real life purposes as well.
Edgefx provides free verified electronic projects kits around the world with abstracts, circuit diagrams, and free electronic software. We provide guidance manual for Do It Yourself Kits (DIY) with the modules at best price along with free shipping
final project ppt
The document describes a voice-based alert system for blind people using ultrasonic sensors. The system is designed by a team with T. Srinivas Reddy as the guide. It uses an LPC1343 cortex M3 microcontroller connected to ultrasonic sensors and a buzzer. The sensors detect obstacles and the microcontroller triggers voice alerts or buzzer sounds. The system aims to help blind people navigate safely in a low-cost and low-power design.
Smart Home Automation And security System
This document discusses using internet of things (IOT) for home automation and security systems. It describes using voice commands, remote control, motion sensors, and other components like Arduino, Bluetooth, and sensors to control lighting, air conditioning, appliances. Potential limitations are discussed like unreliable sonar sensors or needing an internet connection. Future work focuses on upgrading components and simplifying the setup process.
Electronic' skin monitors heart, brain function
The document discusses electronic skin, a new ultra-thin electronic device that can attach to the skin like a temporary tattoo. It can measure vital signs like electrical heart activity and brain waves. Researchers developed it to reduce wires and make medical monitoring more compact. Electronic skin uses tiny sensors and a "spider web" circuitry design made of silicon filaments. It transmits the recorded body signals to a receiver. Researchers believe it could one day control virtual screens to monitor health and even stimulate skin for smart bandages.
Location Finding for blind People Using Voice Navigation Stick Seminar
The voice navigation stick used by the blind people makes use of Ultrasonic and IR sensors to detect obstacles, it also makes use of the GPS system to enhance navigation with the help of speakers, that enables the blind to be independent.
VOICE OPERATED WHEELCHAIR
This document describes a project to build a voice-operated wheelchair for physically disabled persons. The objective is to design hardware for voice recognition and corresponding wheelchair actions. Group members include Mandar Jadhav, Mayuresh Todkar and Dayanand Patil, guided by Dr. V. Jayashree. The system is aimed to help those paralyzed below the neck or with quadriplegia. It will allow independent wheelchair movement through voice commands without need for personal assistance. The design uses a microphone, voice recognition IC, microcontroller, motor drivers and batteries to power DC motors for forward, reverse, left and right wheelchair movement.
Home automation with arduino
This document describes a student project to create a Bluetooth-based home automation system using an Arduino. The system allows controlling electrical devices in a home remotely using a smartphone. It discusses the components used - Arduino UNO, Bluetooth module, relay module, software. The document provides details on each component and how they work together with a block diagram and circuit diagram. It aims to automate home appliances and reduce human effort for tasks like switching on lights or fans.
CHILD SAFETY WEARABLE DEVICE
This document describes a proposed child safety wearable device that uses SMS communication to allow parents to locate their children. The device would include a GSM module to send SMS location data, a GPS sensor to detect location, temperature, UV and SOS light sensors, and an alarm buzzer. It aims to help parents easily locate children in crowded areas by sending an SMS to get the child's location, temperature, or activate an alarm. The device provides real-time monitoring of a child's surroundings while being low-cost and using widely available SMS technology.
IoT BASED SMART HOME USING ARDUINO
This is an energy efficient smart home using internet of things and Arduino. This is just a design part.
All about WEARABLE TECHNOLOGY...By..GEORGE KURIAN POTTACKAL
This document discusses wearable technology. It begins with an introduction that defines wearable technology as small portable computers designed to be worn on the body, often including health and fitness tracking. The document then covers the history of wearable technology from the 1960s to today. It describes the architecture and components of wearable devices including input devices, displays, and networks. Examples of wearable technologies are discussed like smart watches and smart glasses. Applications are wearable computing, healthcare monitoring, and fashion. Advantages include convenience and flexibility while disadvantages include limited battery life and potential health issues. The future of wearables is discussed as dominating personal electronics.
Wearable Biosensors Report
The document is a special study report submitted by Shubham Madhukar Rokade to North Maharashtra University for their Bachelor of Engineering degree. It discusses wearable bio-sensors, including ring sensors and smart shirts. Ring sensors can continuously monitor heart rate and oxygen levels in an unobtrusive way using pulse oximetry. Smart shirts integrate sensors using optical fibers woven directly into the fabric to monitor vital signs without obstruction. The report provides details on the working, components, and applications of these wearable bio-sensing technologies.
automatic streetlight control using ldr ppt
This document describes an automatic street light control circuit using an LDR (Light Dependent Resistor). The circuit uses an LM358 operational amplifier, a relay, an LDR, resistors, a capacitor, a transistor, and a lamp. It works by turning the street light on when the LDR detects low light levels and turning it off when high light levels are detected, thereby automatically controlling the street light and saving energy. The circuit was designed and simulated using Proteus software and implemented on a breadboard.
New microsoft power point presentation
This document describes an Arduino-based ultrasonic navigation system for blind people. The system uses an ultrasonic sensor to detect obstacles and a buzzer to alert the blind user. When an obstacle is near, the buzzer sound increases in intensity to help the user navigate around the obstacle safely. The system aims to help blind individuals better access and navigate their environment.
THE THIRD EYE-Presentation
A student project aims to build a system that converts visual input into audio signals to help the blind or visually impaired navigate. The project's objectives are to develop a prototype device that uses image processing and computer vision techniques to detect objects and hazards, and converts that visual information into audio cues. The system would integrate technologies like image segmentation, enhancement, and 3D modeling with an acoustic interface to describe a user's surroundings. A Pandaboard single-board computer with OpenCV is used to process images from a webcam in real-time and translate them into audio descriptions for visually impaired users.
What's hot (20)
Location Finding for blind People Using Voice Navigation Stick Seminar
Location Finding for blind People Using Voice Navigation Stick Seminar
All about WEARABLE TECHNOLOGY...By..GEORGE KURIAN POTTACKAL
All about WEARABLE TECHNOLOGY...By..GEORGE KURIAN POTTACKAL
Similar to Guiding shoe
Design and Implementation of Ultrasonic Navigator for Visually Impaired
The document describes the design and implementation of an ultrasonic navigator device to help visually impaired people navigate their environment. The device uses ultrasonic sensors to detect obstacles in the environment and servo motors mounted on a glove to provide haptic feedback to the user about the distance and direction of obstacles. It also includes a GPS system to provide navigation instructions to help users reach their destinations. The device aims to provide more information about obstacles than a traditional walking cane by detecting objects in multiple directions and at distances over 1 meter.
Smart Walking Stick for Visually Challenged People
The man has been suffering with diseases and weired. Visually challenged people are blind people who are very common and difficult to deal with in their way. The main aim of this paper is to the visually challenged people with a better navigation tool. This smart walking stick is more sophisticated than a traditional walking stick. It uses a microcontroler to detect an obstacles in front, left, right side of a person. It is based on ultrasonic sensors for distance measurement property. For obstacle indication, there is voice playback which helps to mention a direction of obstacles around a visually challenged person by sensors. Along with this a receiver and buzzer placed on a stick .If the person missing a stick which can be find out by buzzer sound .This sound is induced when switch on a remote controller by visually challenged people .GPS also include in stick to find a visually challenged people.
SMART BLIND STICK USING VOICE MODULE
1. The document describes a smart blind stick that uses sensors and a voice module to help visually impaired people navigate independently.
2. It uses ultrasonic sensors to detect obstacles and a water sensor to detect water or puddles. When obstacles or water are detected, the voice module provides audio warnings to the user.
3. An RF remote is also included to help users locate the stick if they misplace it. The stick aims to provide cost-effective navigation assistance and obstacle detection to enhance mobility and independence for the visually impaired.
The Design and Implementation of a Vest Made For Visually Handicapped Which R...
In this study, the design and implementation of a system was carried out with sensors placed on a vest in order to
ensure the visually impaired people to perform their actions without depending on someone else and to improve
their quality of life. In this system, 4 pieces of sensors placed on the vest’s front, ground and right-left arms
warn the impaired person when less than 150 cm distance remains between the visually impaired and the
obstacle. The microprocessor sends signal to the vibration motor which is placed in the direction where the
obstacle is situated. With the decrease of the distance the vibration increases so that the person can understand
how far and in which direction the obstacle is. For the purpose of not disturbing the other people, instead of
audible warning, a new warning system was used with the help of the vibration motors which can be noticed
only by the impaired person.
Metric Table
This document summarizes several studies related to assistive devices for visually impaired individuals. It describes walking support systems that use ultrasonic sensors and bone conduction earphones to provide directional guidance. It also discusses smart walking sticks that detect obstacles using ultrasonic sensors and alert the user via sounds or voice. Navigation systems using GPS and obstacle detection sensors are presented, along with monitoring systems that track mobility metrics like distance and steps using sensors embedded in an intelligent walking cane.
Smart Blind Stick using Arduino
This paper depicts ultrasonic visually impaired strolling stay with the utilization of arduino. As indicated by WHO, Visually weakened can go from gentle extreme. Around the world, between 300 million individuals are outwardly impeded because of different causes. Roughly 50 million People are thoroughly Blind Approximately 80 of visual deficiency happens in individuals over 50years old enough. In the event that u notice them, you can think about it they cant stroll without the assistance of other. For Blind People with no Support Its Difficult to arrive at their Destination. They faces numerous issues in their day by day schedule everyday life. Vision misfortune was connected by methods for self destructive considerations of self destruction endeavors, in another investigation from south Korea. Individuals with visual Impairment regularly endure significant psychosocial results, the creators wrote in the British Journal Of Ophthalmology. Ophthalmology is a part of medication and medical procedure which manages the determination and therapy of eye issues. ShobhanaSonwane | PriyankaGaidhane | Diksha Mohane | Nikita Gajbhiye | Akansha Patil | Tasneem Hasan "Smart Blind Stick using Arduino" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-6 , October 2020, URL: https://www.ijtsrd.com/papers/ijtsrd33411.pdf Paper Url: https://www.ijtsrd.com/engineering/computer-engineering/33411/smart-blind-stick-using-arduino/shobhanasonwane
IoT Based Assistive Glove for Visually Impaired People
1) The document describes an assistive glove designed to help visually impaired people navigate more accurately and independently.
2) The glove uses ultrasonic sensors to detect obstacles in front and behind the user, notifying them through vibration or sound. It can also identify object types and send location data to caregivers in emergencies.
3) Additionally, the glove allows visually impaired users to recognize currency through image processing and audio output, helping them in daily financial tasks.
Ieeepro techno solutions ieee 2014 embedded project talking assistance ab...
LATEST IEEE PROJECTS, 2016 IEEE PROJECTS, IEEE Projects in Chennai, Engineering Projects, Engineering IEEE Projects, Final Year Projects, Final Year IEEE Projects, IEEE Projects 2015 - 2016. 2016 IEEE projects, 2016 IEEE java projects, 2016 IEEE Dotnet projects, 2016 IEEE .net projects,IEEE Projects, IEEE Projects 2016 ,IEEE Academic Projects, IEEE 2016 Projects, IEEE, IEEE Projects, IEEE Software Projects, Latest IEEE Projects,IEEE Student Projects, IEEE Final year Student Projects,Final Year Projects, final year IEEE 2016 projects, final year 2016 projects,ENGINEERING PROJECTS, MCA projects, BE projects, Embedded Projects, JAVA projects, J2EE projects, .NET projects, Students projects,BE projects, B.Tech. projects, ME projects, M.Tech. projects, M.Phil Projects.
IRJET- Wide Angle View for Visually Impaired
This document describes a proposed wearable headband system to help visually impaired people navigate safely. The system uses an Arduino microcontroller, ultrasonic sensor, speaker, and headband. The ultrasonic sensor detects obstacles and the speaker notifies the user, allowing them to avoid dangers. It is intended to provide independent mobility without needing assistance. The document outlines the hardware components, including the microcontroller and sensors, and software used to detect obstacles and warn the user through audio cues. The goal is to develop an easy-to-use wearable device to help the visually impaired navigate daily life with more confidence and safety.
blind stick using ultrasonic sensor and alarm
This document describes the design of an ultrasonic navigation system to assist blind people. The system uses a microcontroller and various sensors including ultrasonic, IR, water, fire, and light sensors. The ultrasonic sensor detects obstacles and alerts the user with vibrations. Other sensors detect hazards like pits, stairs, water, and fire. The microcontroller interfaces with the sensors and activates output devices like a buzzer or vibrator when hazards are detected. The system is intended to make navigation safer and more secure for blind users by providing alerts through dual feedback mechanisms. Future improvements could include using GPS and voice guidance to provide global positioning information.
Sensor Stick walking aid for the blinds
In this paper, few methods of aiding and guiding visually impaired persons are presented. They are analyzed and studied thoroughly. Some commercially available systems help in aiding people with disabilities of seeing and give information refereeing to the location of the users. We propose an intelligent” stick equipped with an ultrasonic sensor that takes information about the environment. This information is processed and is delivered to the handle stick and thus can be interpreted by the users. The stick will produce beeping sound with varying speed according to the distances of obstacles. This stick will provide assists to visually impaired persons by providing informations related to obstacles distances. This device was tested with blind persons and results are presented.
Jesperson Inc.
Jesperson Inc. is developing a sonar-producing device called The Bat Hat to help the blind navigate without a cane. The Bat Hat is implemented into a baseball cap and uses passive sonar to detect objects in the direction the user is facing, allowing both hands to be free and detecting hazards above the hip level. Currently, canes are the main mobility aid for the blind but can cause wrist problems from repetitive motion. The Bat Hat has no direct competitors and could help meet an growing market need for innovative assistive technologies.
Smart Blind Walking Stick Using Arduino
This system is based on sensors and microcontroller. The features are to detect the obstacle for collision avoidance and it detects the object in directions left, right, down and front. The system is composed of the ultrasonic sensor, IR sensor and Arduino Mega 2560. It has a low cost and lightweight system design. By using these three items, it senses the distance with sensors and the blind stick frame is designed. And then send distance data to Arduino mega2560 controller. In emergency situations, the blind walker knows the distance or safe area for themselves. Ma Naing | Nwe Nwe Oo | May Thwe Oo "Smart Blind Walking Stick Using Arduino" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019, URL: https://www.ijtsrd.com/papers/ijtsrd26601.pdfPaper URL: https://www.ijtsrd.com/engineering/electrical-engineering/26601/smart-blind-walking-stick-using-arduino/ma-naing
Vinetra Parijana.pptx
We all see a God-made world, not a man made world. There is no better way to thank God for your sight than by helping someone in the dark. Most people with visual impairment have difficulty finding their way in an unfamiliar area. Visually impaired people use a walking cane to assist them. However, it is not adequate to ensure their safety when navigating in an unfamiliar area. Therefore, in this project, we propose a smart cane with a face recognition system to help the blind people.
Report for the voice navigation stick.
The voice navigation stick used by the blind people makes use of Ultrasonic and IR sensors to detect obstacles, it also makes use of the GPS system to enhance navigation with the help of speakers, that enables the blind to be independent.
THIRD EYE FOR THE BLIND PEOPLE FINAL PRESENTATION
This document describes a device called "Third Eye for the Blind" that helps blind people navigate by detecting nearby obstacles using ultrasonic waves. The device notifies users of obstacles through an increasing beeping sound as the distance decreases. It works by having an ultrasonic sensor emit sound waves and measure the distance to any reflecting objects. When an object is near, the device triggers a buzzer to beep and alert the person so they can avoid collisions or change direction. The goal is to allow blind people to navigate with more speed and confidence using this automatic obstacle detection system.
Development of blind stick
The designing of a
blind stick consists of stick with many advance features like automatic obstacle presence
detection with audio alarm, water body detection in front of the blind person with alarm. If
the stick is lost there is small remote through which the person can track the blind stick.
The smart blind cane is successfully designed consistent with all the objectives achieved.
Skinput
The document summarizes the Skinput technology, which turns the human body into a touch input surface. Skinput uses sensors in an armband to detect vibrations from taps on the skin. It can be used to control devices like phones and music players. The summary describes how Skinput works by sensing longitudinal and transverse waves from taps, using machine learning to classify inputs to different locations on the arm. It achieves over 80% accuracy but performance is affected by factors like BMI. Research is ongoing to improve Skinput for wider adoption.
Similar to Guiding shoe (18)
Design and Implementation of Ultrasonic Navigator for Visually Impaired
Design and Implementation of Ultrasonic Navigator for Visually Impaired
Smart Walking Stick for Visually Challenged People
Smart Walking Stick for Visually Challenged People
The Design and Implementation of a Vest Made For Visually Handicapped Which R...
The Design and Implementation of a Vest Made For Visually Handicapped Which R...
IoT Based Assistive Glove for Visually Impaired People
IoT Based Assistive Glove for Visually Impaired People
Ieeepro techno solutions ieee 2014 embedded project talking assistance ab...
Ieeepro techno solutions ieee 2014 embedded project talking assistance ab...
Recently uploaded
June Patch Tuesday
Ivanti’s Patch Tuesday breakdown goes beyond patching your applications and brings you the intelligence and guidance needed to prioritize where to focus your attention first. Catch early analysis on our Ivanti blog, then join industry expert Chris Goettl for the Patch Tuesday Webinar Event. There we’ll do a deep dive into each of the bulletins and give guidance on the risks associated with the newly-identified vulnerabilities.
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Building Production Ready Search Pipelines with Spark and Milvus
Spark is the widely used ETL tool for processing, indexing and ingesting data to serving stack for search. Milvus is the production-ready open-source vector database. In this talk we will show how to use Spark to process unstructured data to extract vector representations, and push the vectors to Milvus vector database for search serving.
Skybuffer SAM4U tool for SAP license adoption
Manage and optimize your license adoption and consumption with SAM4U, an SAP free customer software asset management tool.
SAM4U, an SAP complimentary software asset management tool for customers, delivers a detailed and well-structured overview of license inventory and usage with a user-friendly interface. We offer a hosted, cost-effective, and performance-optimized SAM4U setup in the Skybuffer Cloud environment. You retain ownership of the system and data, while we manage the ABAP 7.58 infrastructure, ensuring fixed Total Cost of Ownership (TCO) and exceptional services through the SAP Fiori interface.
AWS Cloud Cost Optimization Presentation.pptx
This presentation provides valuable insights into effective cost-saving techniques on AWS. Learn how to optimize your AWS resources by rightsizing, increasing elasticity, picking the right storage class, and choosing the best pricing model. Additionally, discover essential governance mechanisms to ensure continuous cost efficiency. Whether you are new to AWS or an experienced user, this presentation provides clear and practical tips to help you reduce your cloud costs and get the most out of your budget.
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
A Mix Chart displays historical data of numbers in a graphical or tabular form. The Kalyan Rajdhani Mix Chart specifically shows the results of a sequence of numbers over different periods.
Salesforce Integration for Bonterra Impact Management (fka Social Solutions A...
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on integration of Salesforce with Bonterra Impact Management.
Interested in deploying an integration with Salesforce for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
Columbus Data & Analytics Wednesdays - June 2024
Columbus Data & Analytics Wednesdays, June 2024 with Maria Copot 20
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Are you ready to revolutionize how you handle data? Join us for a webinar where we’ll bring you up to speed with the latest advancements in Generative AI technology and discover how leveraging FME with tools from giants like Google Gemini, Amazon, and Microsoft OpenAI can supercharge your workflow efficiency.
During the hour, we’ll take you through:
Guest Speaker Segment with Hannah Barrington: Dive into the world of dynamic real estate marketing with Hannah, the Marketing Manager at Workspace Group. Hear firsthand how their team generates engaging descriptions for thousands of office units by integrating diverse data sources—from PDF floorplans to web pages—using FME transformers, like OpenAIVisionConnector and AnthropicVisionConnector. This use case will show you how GenAI can streamline content creation for marketing across the board.
Ollama Use Case: Learn how Scenario Specialist Dmitri Bagh has utilized Ollama within FME to input data, create custom models, and enhance security protocols. This segment will include demos to illustrate the full capabilities of FME in AI-driven processes.
Custom AI Models: Discover how to leverage FME to build personalized AI models using your data. Whether it’s populating a model with local data for added security or integrating public AI tools, find out how FME facilitates a versatile and secure approach to AI.
We’ll wrap up with a live Q&A session where you can engage with our experts on your specific use cases, and learn more about optimizing your data workflows with AI.
This webinar is ideal for professionals seeking to harness the power of AI within their data management systems while ensuring high levels of customization and security. Whether you're a novice or an expert, gain actionable insights and strategies to elevate your data processes. Join us to see how FME and AI can revolutionize how you work with data!
SAP S/4 HANA sourcing and procurement to Public cloud
SAP S4 HANA to Public cloud data object differences
Skybuffer AI: Advanced Conversational and Generative AI Solution on SAP Busin...
Skybuffer AI, built on the robust SAP Business Technology Platform (SAP BTP), is the latest and most advanced version of our AI development, reaffirming our commitment to delivering top-tier AI solutions. Skybuffer AI harnesses all the innovative capabilities of the SAP BTP in the AI domain, from Conversational AI to cutting-edge Generative AI and Retrieval-Augmented Generation (RAG). It also helps SAP customers safeguard their investments into SAP Conversational AI and ensure a seamless, one-click transition to SAP Business AI.
With Skybuffer AI, various AI models can be integrated into a single communication channel such as Microsoft Teams. This integration empowers business users with insights drawn from SAP backend systems, enterprise documents, and the expansive knowledge of Generative AI. And the best part of it is that it is all managed through our intuitive no-code Action Server interface, requiring no extensive coding knowledge and making the advanced AI accessible to more users.
Astute Business Solutions | Oracle Cloud Partner |
Your goto partner for Oracle Cloud, PeopleSoft, E-Business Suite, and Ellucian Banner. We are a firm specialized in managed services and consulting.
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
GNSS spoofing via SDR (Criptored Talks 2024)
In the realm of cybersecurity, offensive security practices act as a critical shield. By simulating real-world attacks in a controlled environment, these techniques expose vulnerabilities before malicious actors can exploit them. This proactive approach allows manufacturers to identify and fix weaknesses, significantly enhancing system security.
This presentation delves into the development of a system designed to mimic Galileo's Open Service signal using software-defined radio (SDR) technology. We'll begin with a foundational overview of both Global Navigation Satellite Systems (GNSS) and the intricacies of digital signal processing.
The presentation culminates in a live demonstration. We'll showcase the manipulation of Galileo's Open Service pilot signal, simulating an attack on various software and hardware systems. This practical demonstration serves to highlight the potential consequences of unaddressed vulnerabilities, emphasizing the importance of offensive security practices in safeguarding critical infrastructure.
JavaLand 2024: Application Development Green Masterplan
My presentation slides I used at JavaLand 2024
Trusted Execution Environment for Decentralized Process Mining
Presentation of the paper "Trusted Execution Environment for Decentralized Process Mining" given during the CAiSE 2024 Conference in Cyprus on June 7, 2024.
TrustArc Webinar - 2024 Global Privacy Survey
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
“Temporal Event Neural Networks: A More Efficient Alternative to the Transfor...
“Temporal Event Neural Networks: A More Efficient Alternative to the Transfor...Edge AI and Vision Alliance
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/temporal-event-neural-networks-a-more-efficient-alternative-to-the-transformer-a-presentation-from-brainchip/
Chris Jones, Director of Product Management at BrainChip , presents the “Temporal Event Neural Networks: A More Efficient Alternative to the Transformer” tutorial at the May 2024 Embedded Vision Summit.
The expansion of AI services necessitates enhanced computational capabilities on edge devices. Temporal Event Neural Networks (TENNs), developed by BrainChip, represent a novel and highly efficient state-space network. TENNs demonstrate exceptional proficiency in handling multi-dimensional streaming data, facilitating advancements in object detection, action recognition, speech enhancement and language model/sequence generation. Through the utilization of polynomial-based continuous convolutions, TENNs streamline models, expedite training processes and significantly diminish memory requirements, achieving notable reductions of up to 50x in parameters and 5,000x in energy consumption compared to prevailing methodologies like transformers.
Integration with BrainChip’s Akida neuromorphic hardware IP further enhances TENNs’ capabilities, enabling the realization of highly capable, portable and passively cooled edge devices. This presentation delves into the technical innovations underlying TENNs, presents real-world benchmarks, and elucidates how this cutting-edge approach is positioned to revolutionize edge AI across diverse applications.dbms calicut university B. sc Cs 4th sem.pdf
Its a seminar ppt on database management system using sql
Recently uploaded (20)
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Building Production Ready Search Pipelines with Spark and Milvus
Building Production Ready Search Pipelines with Spark and Milvus
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
Salesforce Integration for Bonterra Impact Management (fka Social Solutions A...
Salesforce Integration for Bonterra Impact Management (fka Social Solutions A...
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Driving Business Innovation: Latest Generative AI Advancements & Success Story
SAP S/4 HANA sourcing and procurement to Public cloud
SAP S/4 HANA sourcing and procurement to Public cloud
Skybuffer AI: Advanced Conversational and Generative AI Solution on SAP Busin...
Skybuffer AI: Advanced Conversational and Generative AI Solution on SAP Busin...
Astute Business Solutions | Oracle Cloud Partner |
Astute Business Solutions | Oracle Cloud Partner |
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
JavaLand 2024: Application Development Green Masterplan
JavaLand 2024: Application Development Green Masterplan
Trusted Execution Environment for Decentralized Process Mining
Trusted Execution Environment for Decentralized Process Mining
“Temporal Event Neural Networks: A More Efficient Alternative to the Transfor...
“Temporal Event Neural Networks: A More Efficient Alternative to the Transfor...
Guiding shoe
- 1. GUIDED BY Mr.N.R.NAGARAJAN PRESENTED BY DANIEL P (ECA1735) ARUN KUMAR P (ECA1726) BHARATH AKASH S (ECA1731) AJEETH M (ECA1716) AAKASH (ECA1701) The science of today is the technology of tomorrow.
- 3. Jens Martensson Abstract 3 • Presently, blind people use a white stick as a tool for directing them when they move or walk. • Here, Guiding shoes are introduced which serve for blind as their guide • The ultrasonic sensor used to sense the object near the shoes and alert the blind person.
- 4. Jens Martensson INTRODUCTI ON World Health Organization reveals that around 14% of blind people are there in total visually impaired people. Less no of advanced technologies launched in India to meet the requirements of Blind. 4
- 5. Jens Martensson 5 RASPBERRY PI OBJEC T ULTRASONIC SENSOR SHOE BATTERY USER VIBRATIN G MOTOR BUZZE R
- 6. Jens Martensson 6 COMPONENTS RASPBERRY PI ULTRASONIC SENSOR BUZZER VIBRATING MOTOR BATTERY SHOE
- 7. Jens Martensson 7 The Raspberry Pi is a series of small single-board computer. Raspbian. This is the official operating system of the Raspberry Pi Foundation. RASPBERRY PI CPU: Quad-core 64-bit ARM Cortex A53 clocked at 1.2 GHz.
- 8. Jens Martensson 8 ULTRASONIC SENSOR Ultrasonic sensors are based on measuring the properties of sound waves with frequency above the human audible range.
- 9. Jens Martensson 9 BUZZER • A buzzer or beeper is an audio signalling device • There are so many types of buzzer and we will use piezoelectric buzzer. • Which is activated from the microcontroller electrical signal. • It is alert blind people from the object which is nearer to them.
- 10. Jens Martensson 10 At noisy site where blind person can’t heard the buzzer then the vibrator indicate them to that some object is near to them. VIBRATING MOTOR
- 11. Jens Martensson Comparison SMART STICK Smart cane is an instrument that alerts blind people if any object or obstacles infront of the person. GUIDING SHOE Smart shoe works similar to the cane.By using the shoe the person feel comfortable.There is no need for holding the cane or stick. 11
- 12. Jens Martensson 12 ADVANTAGES • Auto detection. • Having feature to give you indicate right path. • Simple to use. • Less accidents will be accrued from the blind people.
- 13. Jens Martensson 13 Disadvantages • GPS can’t attach in. • In water circuit will damaged. • Less mechanical strength.
- 14. Jens Martensson 14 • GPS can help blind peoples to source & destination route information. • Holes and Mud places are found out using IR and Transistor. • From the shoes connected GPS we can Easily find the exact position of blind person. Future scope
- 15. Jens Martensson 15 THANK YOU