Go Green AAC Blocks PPT
•Download as PPTX, PDF•
0 likes•249 views
Go-Green Autoclaved Aerated Concrete blocks manufacuring is not only the name of a company but the name of a product that is changing the future of industrial, commercial and residential development in the India. Autoclaved Aerated Concrete (AAC) has been used throughout the world for decades; however, Go-Green Construction blocks buildings have been constructed in the India with minimal national awareness. With an impressive list of benefits that includes superior fire protection, acoustic and thermal insulation, versatility, durability, and light weight along with reduced construction time and labor costs, Go-Green manufacuring offers an innovative building material for the next generation. Go-Green AAC block manufacturing is a limited liability company that was established October 29th, 2012.
Report
Share
Report
Share
Recommended
building defects & remidies
The document discusses common construction defects in buildings such as cracks and dampness. It defines construction defects and lists main causes as application of forces, effects of materials, temperature changes, and biological agents. Common cracks are categorized based on width and appearance. Cracks are further divided into structural and non-structural types. Main causes of cracks are identified as drying shrinkage, thermal movement, elastic deformation, creep, chemical reactions, foundation movement, and vegetation growth. Specific defect examples and their causes are outlined, such as cracks in brickwork from lack of tying and defective flashing. Remedies for preventing common defects are also provided.
Acp panel
Aluminum composite panels are lightweight cladding materials consisting of two thin aluminum sheets bonded to a non-aluminum core. They are used widely in construction for facades, insulation, and signage due to properties such as resistance to weathering, maintenance-free durability, and ability to be formed into complex shapes. Aluminum composite panels are versatile, economical cladding options that can be installed to enhance the appearance and functionality of buildings.
Advanced material of construction..ppt24545452
This document discusses different types of building materials including stones, bricks, tiles, cement, and glass claddings. It describes the common uses of different stones such as basalt, granite, and limestone in construction. It also outlines different types of bricks and tiles, and classifies various cements. Glass claddings are discussed as an increasingly popular building material that provides benefits such as energy efficiency but also has disadvantages like higher costs.
TRANSLUCENT CONCRETE
Transparent concrete is a concrete based building material with light-Tran missive properties due to embedded light optical elements usually Optical fibres. Light is conducted through the stone from one end to the other. Therefore the fibres have to go through the whole object. Transparent concrete is also known as the translucent concrete and light transmitting concrete because of its properties. It is used in fine architecture as a facade material and for cladding of interior walls. In this paper, to integrate the merits of concrete and optical fibre, for developing transparent concrete by arranging the high numerical aperture Plastic Optical Fibres (POF) or big diameter glass optical fibre into concrete. The main purpose is to use sunlight as a light source to reduce the power consumption of illumination and to use the optical fiber to sense the stress of structures and also use this concrete as an architectural purpose for good aesthetical view of the building.
ALTERNATE BUILDING MATERIALS & TECHNOLOGICAL ALTERNATIVES IN CONSTRUCTION
Construction and civil engineering activities have experienced a rapid growth due to improvements in procurement of building materials.
However, the current scenario in the developing construction industry has posed many challenges due to some unsustainable aspects of the highly polluting and the exhaustive nature of building materials.
At the same time, it has also created opportunities for innovative and unconventional resources to emerge due to the widening gap in demand and supply of building materials, as well as the need for energy efficient and economical methods of construction.
Terrazzo flooring and PCC flooring
Presentation By Students Of Delhi Technical campus.
Topic Covered flooring, its purpose, Terrazzo flooring, PCC flooring
Light emitting concrete [OR] Translucent concrete
This document discusses light emitting concrete, which is a concrete building material that emits light through uniformly distributed optical fibers. It works on the principle of nano-optics, where fibers placed directly on top of each other act like slits to carry light through the material. The document outlines the history, properties, manufacturing process, advantages and disadvantages of light emitting concrete. Examples of its applications in buildings, sidewalks, and furniture are also provided.
Pre cast vs cast-in-situ concrete
The document discusses precast concrete construction. Some key points:
- Precast concrete components are cast off-site in a controlled environment and transported to the construction site for assembly. This allows for standardized, mass produced elements.
- Large precast concrete panels form the walls and floors, connecting vertically and horizontally. When joined, they form a rigid box structure that transfers lateral loads.
- Connections between precast elements can be either dry joints using bolts/welds, or monolithic placement with concrete poured to join components.
Recommended
building defects & remidies
The document discusses common construction defects in buildings such as cracks and dampness. It defines construction defects and lists main causes as application of forces, effects of materials, temperature changes, and biological agents. Common cracks are categorized based on width and appearance. Cracks are further divided into structural and non-structural types. Main causes of cracks are identified as drying shrinkage, thermal movement, elastic deformation, creep, chemical reactions, foundation movement, and vegetation growth. Specific defect examples and their causes are outlined, such as cracks in brickwork from lack of tying and defective flashing. Remedies for preventing common defects are also provided.
Acp panel
Aluminum composite panels are lightweight cladding materials consisting of two thin aluminum sheets bonded to a non-aluminum core. They are used widely in construction for facades, insulation, and signage due to properties such as resistance to weathering, maintenance-free durability, and ability to be formed into complex shapes. Aluminum composite panels are versatile, economical cladding options that can be installed to enhance the appearance and functionality of buildings.
Advanced material of construction..ppt24545452
This document discusses different types of building materials including stones, bricks, tiles, cement, and glass claddings. It describes the common uses of different stones such as basalt, granite, and limestone in construction. It also outlines different types of bricks and tiles, and classifies various cements. Glass claddings are discussed as an increasingly popular building material that provides benefits such as energy efficiency but also has disadvantages like higher costs.
TRANSLUCENT CONCRETE
Transparent concrete is a concrete based building material with light-Tran missive properties due to embedded light optical elements usually Optical fibres. Light is conducted through the stone from one end to the other. Therefore the fibres have to go through the whole object. Transparent concrete is also known as the translucent concrete and light transmitting concrete because of its properties. It is used in fine architecture as a facade material and for cladding of interior walls. In this paper, to integrate the merits of concrete and optical fibre, for developing transparent concrete by arranging the high numerical aperture Plastic Optical Fibres (POF) or big diameter glass optical fibre into concrete. The main purpose is to use sunlight as a light source to reduce the power consumption of illumination and to use the optical fiber to sense the stress of structures and also use this concrete as an architectural purpose for good aesthetical view of the building.
ALTERNATE BUILDING MATERIALS & TECHNOLOGICAL ALTERNATIVES IN CONSTRUCTION
Construction and civil engineering activities have experienced a rapid growth due to improvements in procurement of building materials.
However, the current scenario in the developing construction industry has posed many challenges due to some unsustainable aspects of the highly polluting and the exhaustive nature of building materials.
At the same time, it has also created opportunities for innovative and unconventional resources to emerge due to the widening gap in demand and supply of building materials, as well as the need for energy efficient and economical methods of construction.
Terrazzo flooring and PCC flooring
Presentation By Students Of Delhi Technical campus.
Topic Covered flooring, its purpose, Terrazzo flooring, PCC flooring
Light emitting concrete [OR] Translucent concrete
This document discusses light emitting concrete, which is a concrete building material that emits light through uniformly distributed optical fibers. It works on the principle of nano-optics, where fibers placed directly on top of each other act like slits to carry light through the material. The document outlines the history, properties, manufacturing process, advantages and disadvantages of light emitting concrete. Examples of its applications in buildings, sidewalks, and furniture are also provided.
Pre cast vs cast-in-situ concrete
The document discusses precast concrete construction. Some key points:
- Precast concrete components are cast off-site in a controlled environment and transported to the construction site for assembly. This allows for standardized, mass produced elements.
- Large precast concrete panels form the walls and floors, connecting vertically and horizontally. When joined, they form a rigid box structure that transfers lateral loads.
- Connections between precast elements can be either dry joints using bolts/welds, or monolithic placement with concrete poured to join components.
Autoclaved Aerated Concrete Blocks
Autoclaved aerated concrete (AAC) block is a building material made of Portland cement, fine aggregates (fly ash or sand), water and an expansion agent in an autoclaving process heated under pressure which results in the production of air voids in the material, making it less dense, easy to cut/mould and better insulating
PreCast Construction
This document discusses precast concrete construction. Some key points:
- Precast concrete elements are cast and cured off-site then transported for assembly, allowing more efficient production and quality control.
- Elements include slabs, beams, columns, and wall panels that are joined on-site through embedded bolts, plates, and grouted connections.
- The precasting process involves casting concrete around prestressing strands to add strength, then cutting sections and transporting them for erection.
CONCRETE
CONCRETE
CONSTITUENTS OF CONCRETE
LIGHTWEIGHT CONCRETE
ADVANTAGES
DISADVANTAGES
APPLICATIONS
PRINCIPLE TECHNIQUES BEHIND LIGHTWEIGHT CONCRETE
LIGHTWEIGHT AGGREGATE CONCRETE
PRODUCTION OF LIGHTWEIGHT AGGREGATE CONCRETE
CLASSIFICATION OF LIGHTWEIGHT AGGREGATE CONCRETE
NATURAL AGGREGATE
ARTIFICIAL AGGREGATE
LOW-DENSITY CONCRETES
STRUCTURAL LIGHTWEIGHT CONCRETE
MODERATE-STRENGTH LIGHTWEIGHT CONCRETE
PROPERTIES OF LIGHTWEIGHT AGGREGATE CONCRETE
AERATED OR FOAMED CONCRETE
MANUFACTURING OF FOAMED CONCRETE
PROPERTIES OF FOAMED CONCRETE
APPLICATIONS OF FOAMED CONCRETE
NO FINES CONCRETE
PROPERTIES NO FINES CONCRETE
APPLICATIONS NO FINES CONCRETE
HIGH DENSITY CONCRETE
Man-made (Synthetic) Aggregates
ADMIXTURE
High Strength Concrete
SPECIAL METHODS OF MAKING HIGH STRENGTH CONCRETE
Waterproofing copmound
Waterproofing describes making an object waterproof or water-resistant.
Building water-proofing is a process which is designed to prevent water from penetrating a building.
Usually extensive waterproofing measures are added to a building at the time of construction, to provide moisture control from the start
Waterproofing may also be done after a building is built, to address problems as they emerge or as part of a building retrofit
Internal areas that are waterproofed include :
bathrooms,
shower recesses,
laundries
toilets.
Concrete
Concrete is a composite material made by binding aggregates with a cement paste. It comes in various types depending on the binding material (cement or lime) and purpose (plain, reinforced, pre-stressed). Good concrete has strength, durability, density, water tightness, workability and resistance to wear and tear. Proper mixing, placing, compaction and curing are required to develop these qualities in concrete.
A study on the construction process (Precast concrete, In-situ cast concrete,...
A study on the construction process (Precast concrete, In-situ cast concrete,...Bhaddin Al-Naqshabandi
This document provides an overview of precast concrete construction, in-situ cast concrete construction, shoring, and underpinning. It describes that precast concrete elements are cast off-site and include items like slabs, beams, and wall panels. In-situ concrete is poured on-site and can form any shape but requires more time and resources. Shoring uses temporary structures like rakers to support unstable structures during construction. Underpinning strengthens existing foundations, for example by adding new piles or walls underneath for additional support.Ferrocement ppt
Ferrocement is a thin reinforced concrete made of wire mesh and cement mortar. It was introduced in 1943 and offers high strength and flexibility compared to conventional concrete. Ferrocement consists of thin layers of wire mesh embedded in and covered by a sand-cement mortar mix, with a typical ratio of 5% wire mesh to 95% mortar. It can be formed into various shapes by hand or machine and has applications in construction, agriculture, transportation and more due to its strength, versatility and affordability.
Low cost construction
1. The document summarizes various low-cost construction techniques for building housing, including using natural materials like stone, mud bricks, compressed earth blocks, and bamboo.
2. It describes construction methods like rat-trap bond, corbel arches, and filler slabs that reduce costs compared to standard practices.
3. The document provides details on over 15 different low-cost materials and building techniques that can be used to help provide quality, affordable housing.
Acp
Aluminum composite panels (ACP) consist of two thin aluminum sheets bonded to a non-aluminum core. They provide excellent mechanical performance at minimal weight due to a sandwich structure with the core taking shear loads and the skins taking in-plane stresses. ACP offers properties like light weight, insulation, heat resistance, and durability. It is commonly used for architectural cladding, partitions, ceilings, and more. Examples of buildings that use ACP include Spaceship Earth and the Guggenheim Museum due to its design flexibility, rigidity, and efficiency.
Deisgn of Fire Escapes
This presentation deals with the capacity of Fire Escapes, no. of fire escapes required in a building and the different Fire Escape system along with their functionality...
Waterproofing and insulaton
Waterproofing is used to prevent water from entering or escaping building structures. There are internal and external waterproofing membranes. Basement waterproofing is especially important to prevent hydrostatic pressure from causing moisture issues. Common types of basement waterproofing include sealants and water drainage systems. Sealants can be exterior or interior and come in different forms like films, paints or injected solutions. Water drainage systems use perimeter drains, pipes, and sump pumps to collect and remove groundwater from the basement. Proper waterproofing requires both sealing and drainage for effective below-ground protection.
Low cost building materials and construction techniques
This document discusses low cost building materials and construction techniques to reduce costs. It describes using natural materials like bamboo, compressed earth blocks, mud plaster and straw which are sustainable and have low embodied energy. Manufactured materials discussed include fly ash bricks and coal washery reject bricks. Construction techniques to reduce costs include rat trap bond, cob construction, wattle and daub, jack arch roofs and using jali brickwork. The document emphasizes using local, recycled and non-toxic materials to minimize costs while ensuring longevity and environmental friendliness of structures.
Water proofing in buildings
Waterproofing is done to prevent water from penetrating buildings. It involves applying membrane barriers like bitumen or PVC during construction. It can also be done later to address leaks. Common areas waterproofed include bathrooms, terraces, basements, and roofs. Materials used include cement, sand, metal chips, brick bats, and waterproofing chemicals. Techniques include applying cement coats sloped away from the building, with brick bats or tiles in between coats. Thorough preparation and multiple curing coats are important for effective waterproofing.
Wall cladding
Metal Cladding has provided coating applications to industries since 1943. The document discusses different types of cladding materials like wood, concrete, stone, and metals. It focuses on metal cladding, noting that metals provide strong and durable protection for buildings while also allowing for aesthetic versatility. Specific metals discussed include aluminum, steel, and copper, outlining their common uses, benefits, and drawbacks for cladding.
Innovative Building Materials
This document presents an overview of innovative building materials being researched and developed. It describes 16 new materials including translucent concrete made with optical fibers, sensi tiles that guide light through floors, radiant barriers for insulation, solar panel roofing tiles to generate electricity, and ultra touch jeans insulation made from recycled denim. Other materials discussed are electrified wood, flexicomb honeycomb structures, kinetic glass that opens and closes, unfired clay bricks, richlite made from recycled paper, carbon fiber, self-repairing cement, liquid granite, and bendable concrete reinforced with fibers. The conclusion states that replacing old materials with these innovations could improve recycling, save energy and resources, and make construction simpler and stronger.
Lightweight concrete
Lightweight concrete has a lower density than normal concrete, ranging from 300-1850 kg/m3. There are three main types: lightweight aggregate concrete uses expanded aggregates; aerated concrete is produced by incorporating air bubbles; and no-fines concrete omits fine aggregates. Lightweight concrete provides benefits like improved thermal insulation, soundproofing, and fire resistance compared to normal concrete.
Doors and windows
The document discusses different types of doors and windows. It describes doors in terms of their components, sizes, frames, types and materials. The main types of doors covered are paneled doors, glazed doors, flush doors, louvered doors, revolving doors, sliding doors, swing doors and collapsible doors. It also discusses different types of windows like fixed windows. Rolling shutters are described as curtain-like doors made of thin steel sheets used for shops and warehouses. The document provides detailed information on specifications and uses of different door and window components.
Plastering
Plastering involves applying plaster, a mixture of lime or gypsum, sand, and water, to rough or uneven surfaces to make them smooth. The objectives of plastering are to provide an even, durable finished surface and protect the underlying structure. Several tools are used in plastering including trowels, floats, and hawks. There are different types of plaster like lime, cement, mud, and stucco plaster. Cement plaster is suited for damp conditions while lime plaster uses lime as the binding agent. Issues that can arise with plaster include cracking, efflorescence, plaster falling out, and blowing.
Glass partition 002
The document discusses glass partition walls and hollow glass blocks. It describes that glass partition walls use a wooden frame with glass sheets fixed into panels divided by horizontal and vertical posts. Glass blocks are translucent square or rectangular glass units that are laid using mortar and sometimes metal reinforcement. Glass partition walls and blocks provide architectural effects while being light, soundproof, fireproof and heatproof. Proper installation following guidelines is important due to the expansion and contraction of glass.
Partition walls
Partition walls are non-load bearing walls that divide rooms or spaces. They provide privacy, occupy less space, and are lighter and cheaper than load-bearing walls. Good partition walls are thin, provide sound and sight privacy, and are made of durable, fire resistant and insulated materials. Common materials for partition walls include brick, hollow blocks, concrete, glass, wood, strawboard, plaster, metal and drywall. Movable and portable partition walls allow spaces to be reconfigured easily.
Loss Lead Analysis for JTSV
This ppt helped JT Special Vehicles to modify their existing vehicle to suit the consumer needs. It helped not only to upgrade their vehicles but also shows how important is consumers voice.
Royal Enfield Case Study - Marketing
The presentation is on exactly what steps Royal Enfield to reach to a 16x fold growth since Mr. Siddhartha took over. Was a fun learn.
It compares where JT Special Vehicles stand as far as royal enfield is concerned. Gives a road map to success.
More Related Content
What's hot
Autoclaved Aerated Concrete Blocks
Autoclaved aerated concrete (AAC) block is a building material made of Portland cement, fine aggregates (fly ash or sand), water and an expansion agent in an autoclaving process heated under pressure which results in the production of air voids in the material, making it less dense, easy to cut/mould and better insulating
PreCast Construction
This document discusses precast concrete construction. Some key points:
- Precast concrete elements are cast and cured off-site then transported for assembly, allowing more efficient production and quality control.
- Elements include slabs, beams, columns, and wall panels that are joined on-site through embedded bolts, plates, and grouted connections.
- The precasting process involves casting concrete around prestressing strands to add strength, then cutting sections and transporting them for erection.
CONCRETE
CONCRETE
CONSTITUENTS OF CONCRETE
LIGHTWEIGHT CONCRETE
ADVANTAGES
DISADVANTAGES
APPLICATIONS
PRINCIPLE TECHNIQUES BEHIND LIGHTWEIGHT CONCRETE
LIGHTWEIGHT AGGREGATE CONCRETE
PRODUCTION OF LIGHTWEIGHT AGGREGATE CONCRETE
CLASSIFICATION OF LIGHTWEIGHT AGGREGATE CONCRETE
NATURAL AGGREGATE
ARTIFICIAL AGGREGATE
LOW-DENSITY CONCRETES
STRUCTURAL LIGHTWEIGHT CONCRETE
MODERATE-STRENGTH LIGHTWEIGHT CONCRETE
PROPERTIES OF LIGHTWEIGHT AGGREGATE CONCRETE
AERATED OR FOAMED CONCRETE
MANUFACTURING OF FOAMED CONCRETE
PROPERTIES OF FOAMED CONCRETE
APPLICATIONS OF FOAMED CONCRETE
NO FINES CONCRETE
PROPERTIES NO FINES CONCRETE
APPLICATIONS NO FINES CONCRETE
HIGH DENSITY CONCRETE
Man-made (Synthetic) Aggregates
ADMIXTURE
High Strength Concrete
SPECIAL METHODS OF MAKING HIGH STRENGTH CONCRETE
Waterproofing copmound
Waterproofing describes making an object waterproof or water-resistant.
Building water-proofing is a process which is designed to prevent water from penetrating a building.
Usually extensive waterproofing measures are added to a building at the time of construction, to provide moisture control from the start
Waterproofing may also be done after a building is built, to address problems as they emerge or as part of a building retrofit
Internal areas that are waterproofed include :
bathrooms,
shower recesses,
laundries
toilets.
Concrete
Concrete is a composite material made by binding aggregates with a cement paste. It comes in various types depending on the binding material (cement or lime) and purpose (plain, reinforced, pre-stressed). Good concrete has strength, durability, density, water tightness, workability and resistance to wear and tear. Proper mixing, placing, compaction and curing are required to develop these qualities in concrete.
A study on the construction process (Precast concrete, In-situ cast concrete,...
A study on the construction process (Precast concrete, In-situ cast concrete,...Bhaddin Al-Naqshabandi
This document provides an overview of precast concrete construction, in-situ cast concrete construction, shoring, and underpinning. It describes that precast concrete elements are cast off-site and include items like slabs, beams, and wall panels. In-situ concrete is poured on-site and can form any shape but requires more time and resources. Shoring uses temporary structures like rakers to support unstable structures during construction. Underpinning strengthens existing foundations, for example by adding new piles or walls underneath for additional support.Ferrocement ppt
Ferrocement is a thin reinforced concrete made of wire mesh and cement mortar. It was introduced in 1943 and offers high strength and flexibility compared to conventional concrete. Ferrocement consists of thin layers of wire mesh embedded in and covered by a sand-cement mortar mix, with a typical ratio of 5% wire mesh to 95% mortar. It can be formed into various shapes by hand or machine and has applications in construction, agriculture, transportation and more due to its strength, versatility and affordability.
Low cost construction
1. The document summarizes various low-cost construction techniques for building housing, including using natural materials like stone, mud bricks, compressed earth blocks, and bamboo.
2. It describes construction methods like rat-trap bond, corbel arches, and filler slabs that reduce costs compared to standard practices.
3. The document provides details on over 15 different low-cost materials and building techniques that can be used to help provide quality, affordable housing.
Acp
Aluminum composite panels (ACP) consist of two thin aluminum sheets bonded to a non-aluminum core. They provide excellent mechanical performance at minimal weight due to a sandwich structure with the core taking shear loads and the skins taking in-plane stresses. ACP offers properties like light weight, insulation, heat resistance, and durability. It is commonly used for architectural cladding, partitions, ceilings, and more. Examples of buildings that use ACP include Spaceship Earth and the Guggenheim Museum due to its design flexibility, rigidity, and efficiency.
Deisgn of Fire Escapes
This presentation deals with the capacity of Fire Escapes, no. of fire escapes required in a building and the different Fire Escape system along with their functionality...
Waterproofing and insulaton
Waterproofing is used to prevent water from entering or escaping building structures. There are internal and external waterproofing membranes. Basement waterproofing is especially important to prevent hydrostatic pressure from causing moisture issues. Common types of basement waterproofing include sealants and water drainage systems. Sealants can be exterior or interior and come in different forms like films, paints or injected solutions. Water drainage systems use perimeter drains, pipes, and sump pumps to collect and remove groundwater from the basement. Proper waterproofing requires both sealing and drainage for effective below-ground protection.
Low cost building materials and construction techniques
This document discusses low cost building materials and construction techniques to reduce costs. It describes using natural materials like bamboo, compressed earth blocks, mud plaster and straw which are sustainable and have low embodied energy. Manufactured materials discussed include fly ash bricks and coal washery reject bricks. Construction techniques to reduce costs include rat trap bond, cob construction, wattle and daub, jack arch roofs and using jali brickwork. The document emphasizes using local, recycled and non-toxic materials to minimize costs while ensuring longevity and environmental friendliness of structures.
Water proofing in buildings
Waterproofing is done to prevent water from penetrating buildings. It involves applying membrane barriers like bitumen or PVC during construction. It can also be done later to address leaks. Common areas waterproofed include bathrooms, terraces, basements, and roofs. Materials used include cement, sand, metal chips, brick bats, and waterproofing chemicals. Techniques include applying cement coats sloped away from the building, with brick bats or tiles in between coats. Thorough preparation and multiple curing coats are important for effective waterproofing.
Wall cladding
Metal Cladding has provided coating applications to industries since 1943. The document discusses different types of cladding materials like wood, concrete, stone, and metals. It focuses on metal cladding, noting that metals provide strong and durable protection for buildings while also allowing for aesthetic versatility. Specific metals discussed include aluminum, steel, and copper, outlining their common uses, benefits, and drawbacks for cladding.
Innovative Building Materials
This document presents an overview of innovative building materials being researched and developed. It describes 16 new materials including translucent concrete made with optical fibers, sensi tiles that guide light through floors, radiant barriers for insulation, solar panel roofing tiles to generate electricity, and ultra touch jeans insulation made from recycled denim. Other materials discussed are electrified wood, flexicomb honeycomb structures, kinetic glass that opens and closes, unfired clay bricks, richlite made from recycled paper, carbon fiber, self-repairing cement, liquid granite, and bendable concrete reinforced with fibers. The conclusion states that replacing old materials with these innovations could improve recycling, save energy and resources, and make construction simpler and stronger.
Lightweight concrete
Lightweight concrete has a lower density than normal concrete, ranging from 300-1850 kg/m3. There are three main types: lightweight aggregate concrete uses expanded aggregates; aerated concrete is produced by incorporating air bubbles; and no-fines concrete omits fine aggregates. Lightweight concrete provides benefits like improved thermal insulation, soundproofing, and fire resistance compared to normal concrete.
Doors and windows
The document discusses different types of doors and windows. It describes doors in terms of their components, sizes, frames, types and materials. The main types of doors covered are paneled doors, glazed doors, flush doors, louvered doors, revolving doors, sliding doors, swing doors and collapsible doors. It also discusses different types of windows like fixed windows. Rolling shutters are described as curtain-like doors made of thin steel sheets used for shops and warehouses. The document provides detailed information on specifications and uses of different door and window components.
Plastering
Plastering involves applying plaster, a mixture of lime or gypsum, sand, and water, to rough or uneven surfaces to make them smooth. The objectives of plastering are to provide an even, durable finished surface and protect the underlying structure. Several tools are used in plastering including trowels, floats, and hawks. There are different types of plaster like lime, cement, mud, and stucco plaster. Cement plaster is suited for damp conditions while lime plaster uses lime as the binding agent. Issues that can arise with plaster include cracking, efflorescence, plaster falling out, and blowing.
Glass partition 002
The document discusses glass partition walls and hollow glass blocks. It describes that glass partition walls use a wooden frame with glass sheets fixed into panels divided by horizontal and vertical posts. Glass blocks are translucent square or rectangular glass units that are laid using mortar and sometimes metal reinforcement. Glass partition walls and blocks provide architectural effects while being light, soundproof, fireproof and heatproof. Proper installation following guidelines is important due to the expansion and contraction of glass.
Partition walls
Partition walls are non-load bearing walls that divide rooms or spaces. They provide privacy, occupy less space, and are lighter and cheaper than load-bearing walls. Good partition walls are thin, provide sound and sight privacy, and are made of durable, fire resistant and insulated materials. Common materials for partition walls include brick, hollow blocks, concrete, glass, wood, strawboard, plaster, metal and drywall. Movable and portable partition walls allow spaces to be reconfigured easily.
What's hot (20)
A study on the construction process (Precast concrete, In-situ cast concrete,...
A study on the construction process (Precast concrete, In-situ cast concrete,...
Low cost building materials and construction techniques
Low cost building materials and construction techniques
More from Nakul Khairnar
Loss Lead Analysis for JTSV
This ppt helped JT Special Vehicles to modify their existing vehicle to suit the consumer needs. It helped not only to upgrade their vehicles but also shows how important is consumers voice.
Royal Enfield Case Study - Marketing
The presentation is on exactly what steps Royal Enfield to reach to a 16x fold growth since Mr. Siddhartha took over. Was a fun learn.
It compares where JT Special Vehicles stand as far as royal enfield is concerned. Gives a road map to success.
Marketing Mix for a Performance Car Brand
This presentation was made for an Interview during my MBA.
The research and data are all verified and true to my findings.
The creative ideas are only a representation of how to approach the new consumer age, none of the above is ever tried or done before.
BAJA Team Marketing PPT
This ppt was made by Mihir and myself for Team Kraftwagen, a leading college team in the National SAE BAJA Competition held at Indore.
Baja marketing ppt
This is the presentation made by Nakul Khairnar for Team Kraftwagen, a leading BAJA 2014 Team.
Feel free to learn from one of the best teams of BAJA
Volkswagen Product Mix
The product strategy and mix in Volkswagen marketing strategy can be explained as follows:
Volkswagen offers several vehicles in different countries. Its top selling and most popular models include Volkswagen Polo, Volkswagen Passat, Volkswagen Jetta, Volkswagen Sirocco, Volkswagen Tiguan, Volkswagen Touran, Phaeton, Eos, and Beetle. All these cars are the product strategy in the marketing mix of Volkswagen. Depending on the level of localization, features, comfort, size, seating capacity, options, engine configurations and power several different trims and variants are offered. The various body types Volkswagen offers including hatchback, estate, sedan, coupe, convertible, SUV, crossover, coupe and MPV. It also manufactures and sells Hybrid, Dual fuel and Electric vehicles. Volkswagen cars, Polo and Gold also won the prestigious European Car of the Year award, which is 50 years old.
Varroc Engineering Introduction Prt1
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive function. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms.
More from Nakul Khairnar (8)
Recently uploaded
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...University of Maribor
Slides from talk presenting:
Aleš Zamuda: Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapter and Networking.
Presentation at IcETRAN 2024 session:
"Inter-Society Networking Panel GRSS/MTT-S/CIS
Panel Session: Promoting Connection and Cooperation"
IEEE Slovenia GRSS
IEEE Serbia and Montenegro MTT-S
IEEE Slovenia CIS
11TH INTERNATIONAL CONFERENCE ON ELECTRICAL, ELECTRONIC AND COMPUTING ENGINEERING
3-6 June 2024, Niš, Serbia哪里办理(csu毕业证书)查尔斯特大学毕业证硕士学历原版一模一样
原版一模一样【微信：741003700 】【(csu毕业证书)查尔斯特大学毕业证硕士学历】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
K8sGPT is a tool that analyzes and diagnoses Kubernetes clusters. This presentation was used to share the requirements and dependencies to deploy K8sGPT in a local environment.
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
Iron and Steel Technology towards Sustainable Steelmaking
DfMAy 2024 - key insights and contributions
We have compiled the most important slides from each speaker's presentation. This year’s compilation, available for free, captures the key insights and contributions shared during the DfMAy 2024 conference.
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
As digital technology becomes more deeply embedded in power systems, protecting the communication
networks of Smart Grids (SG) has emerged as a critical concern. Distributed Network Protocol 3 (DNP3)
represents a multi-tiered application layer protocol extensively utilized in Supervisory Control and Data
Acquisition (SCADA)-based smart grids to facilitate real-time data gathering and control functionalities.
Robust Intrusion Detection Systems (IDS) are necessary for early threat detection and mitigation because
of the interconnection of these networks, which makes them vulnerable to a variety of cyberattacks. To
solve this issue, this paper develops a hybrid Deep Learning (DL) model specifically designed for intrusion
detection in smart grids. The proposed approach is a combination of the Convolutional Neural Network
(CNN) and the Long-Short-Term Memory algorithms (LSTM). We employed a recent intrusion detection
dataset (DNP3), which focuses on unauthorized commands and Denial of Service (DoS) cyberattacks, to
train and test our model. The results of our experiments show that our CNN-LSTM method is much better
at finding smart grid intrusions than other deep learning algorithms used for classification. In addition,
our proposed approach improves accuracy, precision, recall, and F1 score, achieving a high detection
accuracy rate of 99.50%.
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
Bigdata of technology
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
Traditionally, dealing with real-time data pipelines has involved significant overhead, even for straightforward tasks like data transformation or masking. However, in this talk, we’ll venture into the dynamic realm of WebAssembly (WASM) and discover how it can revolutionize the creation of stateless streaming pipelines within a Kafka (Redpanda) broker. These pipelines are adept at managing low-latency, high-data-volume scenarios.
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
The rivalry between prominent international actors for dominance over Central Asia's hydrocarbon
reserves and the ancient silk trade route, along with China's diplomatic endeavours in the area, has been
referred to as the "New Great Game." This research centres on the power struggle, considering
geopolitical, geostrategic, and geoeconomic variables. Topics including trade, political hegemony, oil
politics, and conventional and nontraditional security are all explored and explained by the researcher.
Using Mackinder's Heartland, Spykman Rimland, and Hegemonic Stability theories, examines China's role
in Central Asia. This study adheres to the empirical epistemological method and has taken care of
objectivity. This study analyze primary and secondary research documents critically to elaborate role of
china’s geo economic outreach in central Asian countries and its future prospect. China is thriving in trade,
pipeline politics, and winning states, according to this study, thanks to important instruments like the
Shanghai Cooperation Organisation and the Belt and Road Economic Initiative. According to this study,
China is seeing significant success in commerce, pipeline politics, and gaining influence on other
governments. This success may be attributed to the effective utilisation of key tools such as the Shanghai
Cooperation Organisation and the Belt and Road Economic Initiative.
Understanding Inductive Bias in Machine Learning
This presentation explores the concept of inductive bias in machine learning. It explains how algorithms come with built-in assumptions and preferences that guide the learning process. You'll learn about the different types of inductive bias and how they can impact the performance and generalizability of machine learning models.
The presentation also covers the positive and negative aspects of inductive bias, along with strategies for mitigating potential drawbacks. We'll explore examples of how bias manifests in algorithms like neural networks and decision trees.
By understanding inductive bias, you can gain valuable insights into how machine learning models work and make informed decisions when building and deploying them.
Low power architecture of logic gates using adiabatic techniques
The growing significance of portable systems to limit power consumption in ultra-large-scale-integration chips of very high density, has recently led to rapid and inventive progresses in low-power design. The most effective technique is adiabatic logic circuit design in energy-efficient hardware. This paper presents two adiabatic approaches for the design of low power circuits, modified positive feedback adiabatic logic (modified PFAL) and the other is direct current diode based positive feedback adiabatic logic (DC-DB PFAL). Logic gates are the preliminary components in any digital circuit design. By improving the performance of basic gates, one can improvise the whole system performance. In this paper proposed circuit design of the low power architecture of OR/NOR, AND/NAND, and XOR/XNOR gates are presented using the said approaches and their results are analyzed for powerdissipation, delay, power-delay-product and rise time and compared with the other adiabatic techniques along with the conventional complementary metal oxide semiconductor (CMOS) designs reported in the literature. It has been found that the designs with DC-DB PFAL technique outperform with the percentage improvement of 65% for NOR gate and 7% for NAND gate and 34% for XNOR gate over the modified PFAL techniques at 10 MHz respectively.
22CYT12-Unit-V-E Waste and its Management.ppt
Introduction- e - waste – definition - sources of e-waste– hazardous substances in e-waste - effects of e-waste on environment and human health- need for e-waste management– e-waste handling rules - waste minimization techniques for managing e-waste – recycling of e-waste - disposal treatment methods of e- waste – mechanism of extraction of precious metal from leaching solution-global Scenario of E-waste – E-waste in India- case studies.
Advanced control scheme of doubly fed induction generator for wind turbine us...
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
Recently uploaded (20)
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
ML Based Model for NIDS MSc Updated Presentation.v2.pptx
ML Based Model for NIDS MSc Updated Presentation.v2.pptx
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
Low power architecture of logic gates using adiabatic techniques
Low power architecture of logic gates using adiabatic techniques
Manufacturing Process of molasses based distillery ppt.pptx
Manufacturing Process of molasses based distillery ppt.pptx
Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...