Bridge failures can occur due to various causes including cementation issues, mechanical failures of components, gingival/periodontal breakdown, caries, and pulp necrosis. Common causes of failure include faulty cement selection or application, inadequate tooth preparation, poor design, occlusal problems, and marginal discrepancies. Proper diagnosis, treatment planning, technique, and maintenance are required to achieve long-term success of fixed partial dentures.
Failures in Fixed Partial Denture
(Prosthodontics FPD- Dental science)
Various types of failures in the fabrication of fixed partial denture
Dr.Sachin Sunny Otta
St.Gregorios Dental College,Kothamangalam,Ernakulam
Failures in Fixed Partial Denture
(Prosthodontics FPD- Dental science)
Various types of failures in the fabrication of fixed partial denture
Dr.Sachin Sunny Otta
St.Gregorios Dental College,Kothamangalam,Ernakulam
The cast metal restoration is versatile and is especially applicable to Class II onlay preparations. The process has many steps, involves many dental materials, and requires meticulous attention to prepration.
Tooth treatment planned to be restored with an intracoronal restoration, but the decay or fracture is so extensive that a direct restoration, such as amalgam or composite, would not be able to sustain or bear forces.
Additionally, when decay or fracture incorporate areas of cusp or remaining tooth structure that undermines perimeter walls of a tooth, an onlay might be indicated.
Fixed partial dentures transmit forces through the abutments to the periodontium. Failures are due to poor engineering, the use of improper materials, inadequate tooth preparation, and faulty fabrication. Of particular concern to prosthodontist is the selection of teeth for abutments. They must recognize the forces developed by the oral mechanism, and resistance.
Successful selection of abutments for fixed partial dentures requires sensitive diagnostic ability. Thorough knowledge of anatomy, ceramics, the chemistry and physics of dental materials, metallurgy, Periodontics, phonetics, physiology, radiology and the mechanics of oral function is fundamental.
Non rigid connectors in fixed prosthesis / cosmetic dentistry trainingIndian dental academy
Indian Dental Academy: will be one of the most relevant and exciting training center with best faculty and flexible training programs for dental professionals who wish to advance in their dental practice,Offers certified courses in Dental implants,Orthodontics,Endodontics,Cosmetic Dentistry, Prosthetic Dentistry, Periodontics and General Dentistry.
The patient who requires a single denture opposing a natural or restored dentition challenges the clinician even more than the completely edentulous patient does. This is due to the biomechanical differences in the supporting tissues of the opposing arches. So a proper evaluation, correction of the existing factors and proper sequence of denture construction is necessary to give a more stable prosthesis.
in this lecture we will discuss everything about fixed partial denture types, components, designs, parts, materials and classifications.
hope you enjoy it .
A presentation on the instructions to be given to complete denture patients at the insertion appointment. Dealing with patients can be hard at times but with a proper approach, a strong rapport can be formed with the patient.
The cast metal restoration is versatile and is especially applicable to Class II onlay preparations. The process has many steps, involves many dental materials, and requires meticulous attention to prepration.
Tooth treatment planned to be restored with an intracoronal restoration, but the decay or fracture is so extensive that a direct restoration, such as amalgam or composite, would not be able to sustain or bear forces.
Additionally, when decay or fracture incorporate areas of cusp or remaining tooth structure that undermines perimeter walls of a tooth, an onlay might be indicated.
Fixed partial dentures transmit forces through the abutments to the periodontium. Failures are due to poor engineering, the use of improper materials, inadequate tooth preparation, and faulty fabrication. Of particular concern to prosthodontist is the selection of teeth for abutments. They must recognize the forces developed by the oral mechanism, and resistance.
Successful selection of abutments for fixed partial dentures requires sensitive diagnostic ability. Thorough knowledge of anatomy, ceramics, the chemistry and physics of dental materials, metallurgy, Periodontics, phonetics, physiology, radiology and the mechanics of oral function is fundamental.
Non rigid connectors in fixed prosthesis / cosmetic dentistry trainingIndian dental academy
Indian Dental Academy: will be one of the most relevant and exciting training center with best faculty and flexible training programs for dental professionals who wish to advance in their dental practice,Offers certified courses in Dental implants,Orthodontics,Endodontics,Cosmetic Dentistry, Prosthetic Dentistry, Periodontics and General Dentistry.
The patient who requires a single denture opposing a natural or restored dentition challenges the clinician even more than the completely edentulous patient does. This is due to the biomechanical differences in the supporting tissues of the opposing arches. So a proper evaluation, correction of the existing factors and proper sequence of denture construction is necessary to give a more stable prosthesis.
in this lecture we will discuss everything about fixed partial denture types, components, designs, parts, materials and classifications.
hope you enjoy it .
A presentation on the instructions to be given to complete denture patients at the insertion appointment. Dealing with patients can be hard at times but with a proper approach, a strong rapport can be formed with the patient.
Failures in fixed partial dentures /certified fixed orthodontic courses by In...Indian dental academy
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and offering a wide range of dental certified courses in different formats.
Post insertion complaints in cd patients/ orthodontic continuing educationIndian dental academy
Indian Dental Academy: will be one of the most relevant and exciting training center with best faculty and flexible training programs for dental professionals who wish to advance in their dental practice,Offers certified courses in Dental implants,Orthodontics,Endodontics,Cosmetic Dentistry, Prosthetic Dentistry, Periodontics and General Dentistry.
Fpd failures/certified fixed orthodontic courses by Indian dental academyIndian dental academy
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and offering a wide range of dental certified courses in different formats.
Indian dental academy provides dental crown & Bridge,rotary endodontics,fixed orthodontics,
Dental implants courses.for details pls visit www.indiandentalacademy.com ,or call
0091-9248678078
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and
offering a wide range of dental certified courses in different formats.for more details please visit
www.indiandentalacademy.com
Porcelain veneers are known to be the most effective, long-lasting, and appealing cosmetic procedure to give a professional smile. The various problems like discolored teeth, chipped teeth, rotated teeth, crowded teeth, or gaps can be easily solved by porcelain veneers.The porcelain veneers are extremely natural-looking and can easily cover any staining present on the tooth structure. It is a great option to improve the smile efficiently and at an affordable cost.
principles of tooth preparation - ann george final.pptxDrHIMANSHUTIWARI1
No recent literature has reviewed the current scientific knowledge on complete coverage tooth preparations.Nine scientific principles have been developed that ensure mechanical, biologic, and esthetic success for tooth preparation of complete coverage restorations.
Indian Dental Academy: will be one of the most relevant and exciting
training center with best faculty and flexible training programs
for dental professionals who wish to advance in their dental
practice,Offers certified courses in Dental
implants,Orthodontics,Endodontics,Cosmetic Dentistry, Prosthetic
Dentistry, Periodontics and General Dentistry.
explained with Limited matter moreover I have included all the images. if you go through a standard textbook and referred to this PPT it will help you so much I hope It helps you. ask me for the books details.
Opportunity for Dentists (BDS/MDS )to relocate to United kingdom -Register as a DENTAL HYGIENIST/ DENTAL THERAPIST without Board exams and after approval you can register in GDC as a DH/DT and start working as a DH/DT Immediately and get paid.
You can complete the whole process in 3-4 months.Salary range for DH/DT is around 2500-3500 Pounds per month.
Eligibility / requirements-
1. An International English Language Testing System (IELTS) certificate
at the appropriate level.(Within 2 yrs of application date )
2: A recent primary dental qualification that has been taught and examined in English..(Within 2 yrs of application date )
3: A recent pass in a language test for registration with a regulatory authority in a country where the first language is English.
If you are interested Please contact us for more details.
1ST, 2ND AND 3RD ORDER BENDS IN STANDARD EDGEWISE APPLIANCE SYSTEM /Fixed ort...Indian dental academy
Indian Dental Academy: will be one of the most relevant and exciting training center with best faculty and flexible training programs for dental professionals
who wish to advance in their dental practice,Offers certified courses in Dental implants,Orthodontics,Endodontics,Cosmetic Dentistry, Prosthetic Dentistry,
Periodontics and General Dentistry.
Indian Dental Academy: will be one of the most relevant and exciting training center with best faculty and flexible training programs for dental professionals who wish to advance in their dental practice,Offers certified courses in Dental implants,Orthodontics,Endodontics,Cosmetic Dentistry, Prosthetic Dentistry, Periodontics and General Dentistry.
I –Aligners are made with FDA approved transparent thermoplastic materials using 3D scanning, 3D Printing and finally Trays with Pressure vacuum formers.
Dear Doctor,
Indian Dental Academy Now offers comprehensive online Orthodontics course.
Course includes:
1.whiteboard lecture presentations
2.Case Discussions
3.with hundreds of pictures.
4.Demo on Models
5.Demo on Patients
6. subtitles in your own language
12 months unlimited access and support @350 USD only.
For Demo please visit :www.idalectures.com/preview/
For more details visit: www.idalectures.com
Please contact us for any clarifications:
idalectures@gmail.com
indiandentalacademy@gmail.com
Thanks & Regards
Indian Dental Academy
--
Indian Dental Academy
Leader in continuing dental education
www.indiandentalacademy.com
skype:indiandentalacademy
+919248678078
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and
offering a wide range of dental certified courses in different formats.for more details please visit
www.indiandentalacademy.com
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and
offering a wide range of dental certified courses in different formats.for more details please visit
www.indiandentalacademy.com
Cytotoxicity of silicone materials used in maxillofacial prosthesis / dental ...Indian dental academy
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and
offering a wide range of dental certified courses in different formats.for more details please visit
www.indiandentalacademy.com
Diagnosis and treatment planning in completely endntulous arches/dental coursesIndian dental academy
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and
offering a wide range of dental certified courses in different formats.for more details please visit
www.indiandentalacademy.com
Properties of Denture base materials /rotary endodontic coursesIndian dental academy
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and
offering a wide range of dental certified courses in different formats.for more details please visit
www.indiandentalacademy.com
Use of modified tooth forms in complete denture occlusion / dental implant...Indian dental academy
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and
offering a wide range of dental certified courses in different formats.for more details please visit
www.indiandentalacademy.com
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and
offering a wide range of dental certified courses in different formats.for more details please visit
www.indiandentalacademy.com
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and
offering a wide range of dental certified courses in different formats.for more details please visit
www.indiandentalacademy.com
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and
offering a wide range of dental certified courses in different formats.for more details please visit
www.indiandentalacademy.com
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and
offering a wide range of dental certified courses in different formats.for more details please visit
www.indiandentalacademy.com
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and
offering a wide range of dental certified courses in different formats.for more details please visit
www.indiandentalacademy.com
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and
offering a wide range of dental certified courses in different formats.for more details please visit
www.indiandentalacademy.com
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and
offering a wide range of dental certified courses in different formats.for more details please visit
www.indiandentalacademy.com
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and
offering a wide range of dental certified courses in different formats.for more details please visit
www.indiandentalacademy.com
Unit 8 - Information and Communication Technology (Paper I).pdfThiyagu K
This slides describes the basic concepts of ICT, basics of Email, Emerging Technology and Digital Initiatives in Education. This presentations aligns with the UGC Paper I syllabus.
Read| The latest issue of The Challenger is here! We are thrilled to announce that our school paper has qualified for the NATIONAL SCHOOLS PRESS CONFERENCE (NSPC) 2024. Thank you for your unwavering support and trust. Dive into the stories that made us stand out!
Safalta Digital marketing institute in Noida, provide complete applications that encompass a huge range of virtual advertising and marketing additives, which includes search engine optimization, virtual communication advertising, pay-per-click on marketing, content material advertising, internet analytics, and greater. These university courses are designed for students who possess a comprehensive understanding of virtual marketing strategies and attributes.Safalta Digital Marketing Institute in Noida is a first choice for young individuals or students who are looking to start their careers in the field of digital advertising. The institute gives specialized courses designed and certification.
for beginners, providing thorough training in areas such as SEO, digital communication marketing, and PPC training in Noida. After finishing the program, students receive the certifications recognised by top different universitie, setting a strong foundation for a successful career in digital marketing.
Acetabularia Information For Class 9 .docxvaibhavrinwa19
Acetabularia acetabulum is a single-celled green alga that in its vegetative state is morphologically differentiated into a basal rhizoid and an axially elongated stalk, which bears whorls of branching hairs. The single diploid nucleus resides in the rhizoid.
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...Dr. Vinod Kumar Kanvaria
Exploiting Artificial Intelligence for Empowering Researchers and Faculty,
International FDP on Fundamentals of Research in Social Sciences
at Integral University, Lucknow, 06.06.2024
By Dr. Vinod Kumar Kanvaria
Normal Labour/ Stages of Labour/ Mechanism of LabourWasim Ak
Normal labor is also termed spontaneous labor, defined as the natural physiological process through which the fetus, placenta, and membranes are expelled from the uterus through the birth canal at term (37 to 42 weeks
Introduction to AI for Nonprofits with Tapp NetworkTechSoup
Dive into the world of AI! Experts Jon Hill and Tareq Monaur will guide you through AI's role in enhancing nonprofit websites and basic marketing strategies, making it easy to understand and apply.
A Strategic Approach: GenAI in EducationPeter Windle
Artificial Intelligence (AI) technologies such as Generative AI, Image Generators and Large Language Models have had a dramatic impact on teaching, learning and assessment over the past 18 months. The most immediate threat AI posed was to Academic Integrity with Higher Education Institutes (HEIs) focusing their efforts on combating the use of GenAI in assessment. Guidelines were developed for staff and students, policies put in place too. Innovative educators have forged paths in the use of Generative AI for teaching, learning and assessments leading to pockets of transformation springing up across HEIs, often with little or no top-down guidance, support or direction.
This Gasta posits a strategic approach to integrating AI into HEIs to prepare staff, students and the curriculum for an evolving world and workplace. We will highlight the advantages of working with these technologies beyond the realm of teaching, learning and assessment by considering prompt engineering skills, industry impact, curriculum changes, and the need for staff upskilling. In contrast, not engaging strategically with Generative AI poses risks, including falling behind peers, missed opportunities and failing to ensure our graduates remain employable. The rapid evolution of AI technologies necessitates a proactive and strategic approach if we are to remain relevant.
Macroeconomics- Movie Location
This will be used as part of your Personal Professional Portfolio once graded.
Objective:
Prepare a presentation or a paper using research, basic comparative analysis, data organization and application of economic information. You will make an informed assessment of an economic climate outside of the United States to accomplish an entertainment industry objective.
FPD failures/dental CROWN & BRIDGE courses by Indian dental academy
1. Bridge Failures
“Technology in the hands of a skilled operator makes it possible
to do more work of an even higher quality. But in the hands of one
who has not mastered the skills of his or her profession, that
technology merely enables one to do tremendous damage.”
- Herbert T. Shillingburg
Excellence in dental care is achieved through the dentist’s ability to
assess the patient, determine needs, design an appropriate treatment
plan and execute the plan with proficiency.
CLASSIFICATIONS
The causes of FPD failures were summarized as early as in 1920 when Tinker
wrote
“Chief among the causes for such disappointing results has been:
First: Faulty, and in some cases, no attempt at diagnosis and prognosis.
Second: Failure to remove foci of infection in attention to treatment and care of the
investing tissues and mouth sanitation.
Third: Disregard for tooth form
Fourth: Absence of proper embrasures
Fifth: Inter proximal spaces
Sixth: Faulty occlusion and articulation
2. Other classification given by Bennard G. N. Smith
1. Loss of retention
2. Mechanical failure of crowns or bridge components
a. Porcelain fracture
b. Failure of solder joints
c. Distortion
d. Occlusal wear and perforation
e. Lost facings
3. Changes in the abutment tooth
a. Periodontal disease
b. Problems with the pulp
c. Caries
d. Fracture of the prepared natural crown or root
e. Movement of the tooth
4. Design failures
a. Under-prescribed FPDs
b. Over-prescribed FPDs
5. Inadequate clinical or laboratory technique
a. Positive ledge
b. Negative ledge
c. Defect
d. Poor shape and color
6. Occlusal problems
3. Failures of FPD
Failures of fixed partial dentures occur based on:
• Patient complaints
• Duration of time
Patient complaints
• Pain
• Sensitivity
• Looseness of bridge
• Pain in soft tissue (gingiva)
• Esthetics
• Fracture
• Swelling
• Speech
• Mastication
Duration of time
• Immediate
• Delayed
TYPES OF BRIDGE FAILURES
I. Cementation failure
II. Mechanical failure
III. Gingival and periodontal breakdown
IV. Caries
V. Necrosis of pulp
VI. Esthetic failure
4. I.CEMENTATION FAILURE
• Cement failure
• Retention failure
• Occlusal problems
• Distortion of the bridge
Cement Failure
• Cement selection
• Old cement
• Prolonged mixing time
• Thin mix
• Thick mix
• Cement setting prior to seating
• Inadequate isolation
• Incomplete removal of temporary cement
• Thick cement space
• Inclusion of cotton fibers
• Insufficient pressure while cementation
5. Cement Selection
• FPD Multiretainers - GIC
• Non Vital Teeth/Advanced Pulp Recession - ZINC PHOSPHATE
• Temporary Cementation - ZINC OXIDE EUGENOL
• Fixation of Facings- DIMETHACRYLATE COMPOSITES
• Abutment with Minimal Dentin / Exposure - CALCIUM HYDRO
OXIDE + ZINC OXIDE EUGENOL
Thick Cement Space
• Convergence below 6º
• Excessive application of die spacer
• Thick cement mix
• Grinding metal inside retainers
• Cement setting prior to seating
How to Confirm Cement Failure
Pull the crown margin and see for movement of the crown
Crown margins which were subgingivally placed will be visible
when we pull the crown margin
6. Bubbles come out of the margin or through perforation of the crown
(if present) when the crown margin is pushed by applying pressure
occlusally
Retention failure
• Excessive taper
• Short clinical crown
• Mis-fit
• Mis-alignment
Retention
• Retention prevents the removal of the restoration along the path of
insertion or the long axis of the tooth.
• Resistance prevents dislodgement of the restoration by forces
directed in apical or oblique direction
Improving Retention
• Additional retentive grooves/ proximal grooves.
• Additional pins- drill the retainer & tooth .5 to .7 mm with round
bur in buccal & lingual aspects, cut the excessive length & smoothen
7. the area.
• Crown lengthening
• Sub gingival margins
• Additional abutments
Excessive Taper
• The relationship of one wall of preparation to the long axis of that
preparation is the inclination of that wall.
• Sum of the inclination of two opposing walls give the taper of the
preparation.
• Minimum 12º taper is necessary to ensure the absence of undercuts
& also the restoration is placed on the preparation after being
fabricated in final form.
• Conscious effort to incorporate taper usually results in over tapered,
non retentive preparation.
Short Clinical Crown
• Cement creates a weak bond, largely by mechanical interlocks,
between the inner surface of the restoration & the axial wall of the
preparation. So, greater the surface area of preparation, greater wills
8. the retention.
• A short, over tapered crown would have minimal retention because
the restoration can be removed along infinite paths.
• Because the length of axial wall occlusal to finish line interferes
with the displacement, the length & inclination become important
factors.
Misfit
Causes
• Expansion of metal substructure because of
-Improper water /powder ratio of investment
-Improper mixing time
-Improper burn out temperature
• Distortion of the margins
• Distortion of metal substructure
• Metal bubbles in occlusal or margin regions because of
- Inadequate vacuum during investing
- Improper brush technique
- No surfactant
• Porcelain inside retainer
9. • Excessive oxide layer in inner side of retainer
• Tight contact points
• Thick cement space
• Insufficient pressure during cementation
Misalignment
• In case of misalignment the bridge will +ve spring in it & tend to
seat further on pressure due to abutment teeth moving slightly
• In misfit the resistance felt is solid.
Causes
• Abutment displacement due to improper temporization.
• Distortion of wax pattern
• Casting defects
• Distortion of metal framework in porcelain firing.
• Porcelain flow inside the retainers
• Mal alignment of solder joints
• Excessive metal or porcelain in tissue surface of pontic.
Remedy
• If the bridge seats fully under pressure- leave it in place for 30 min
to 1 hr asking the patient to exert gentle pressure.
10. • If it does not work, temporarily cement to one of the retainers for 1
to 2 days.
• Then, the bridge is unsoldered, separate components tried. If they
seat, take location impression & resolder.
Occlusal problems
Problems in occlusion are basically
Immediate problems
1. Occlusal interferences
2. Marginal ridges at different levels
3. Supra eruption of opposing tooth
4. Para functional habits
Delayed problems
1. Wearing of occlusal surfaces
2. Loss of occlusal contacts
3. Cementation failure due to lateral forces
4. Periodontal and gingival breakdown
5. Tenderness
Torque
• From a cusp extended too far bucally or lingually.
• Pre mature contact on lateral excursion extremity.
11. • Results in cementation failure.
Reduce bucco lingual width of occlusal surface
Indications
• Mobility of teeth
• Tenderness on mastication
• Hyperemia of soft tissues
• Sensitivity to heat, cold & sweet
• Burnished metal in area of premature contact
Checking occlusion
Touch
Tin articulating paper
Occlusal indicator wax
Occlusion should be adjusted both in centric and eccentric
Distortion
• Distortion of wax patterns
• Incomplete casting
12. • Long span bridges
Wax Patterns
• Removal from the die
• Spruing stage
• Investing stage because of the thick investment material.
Incomplete Casting
• Too thin wax patterns
• Incomplete wax elimination
• Cool mold or melt
• Insufficient metal
Long Span Bridges
• Thin crown
• Soft metal
• Heat treatment not being done
• Porosity in the metal
• Distortion of margins.
13. MECHANICAL FAILURE
1. Retainer failure
2. Pontic failure
3. Connector failure
Retainer Failure
Perforation
• Insufficient occlusal reduction
• High points in opposing dentition
• Premature contacts
• Soft metal
• Porosity
• Para functional habits
Marginal Discrepancy
The more accurately the restoration is adapted to tooth, the less
will be chances of cementation failure, recurrent caries or periodontal
disease. 50μ to 100μ discrepancy is acceptable.
• Rough margins reduce adaptation
• Open margins encourage entry of saliva and cariogenic organisms
• Over extended margins cannot be adapted to converging convexity
of tooth at cervical margin
14. Causes
• Selection of margin
• Improper preparation
• No gingival retraction
• Improper selection of impression material
• Distortion of wax patterns
• Nodules at margin or inside casting
• Thick cement
• Prior setting of cement
Facing Failure
Fracture
Too little retention
Spot contact at porcelain metal junction
Malocclusion
Microleakage.
Wearing
15. • Deep bite
• Acrylic veneering opposing porcelain teeth
• Faulty brushing & flossing
• Parafunctional habits
Discoloration
• Absorption of oral fluids
• Absorption of artificial food colouring agents through the
microcracks or microleakage in metal & facing
• Tarnish of underlying metal & facing
Pontic failure
Requirements
FFoorrmm && sshhaappee ooff ggiinnggiivvaall ssuurrffaaccee mmuusstt nnoott iirrrriittaattee rreessiidduuaall rriiddggee
Design must incorporate mechanical principles for strength &
longevity
Esthetics
Residual Ridge Contour
• Ideal - smooth, easy to clean
• Irregular hyperplastic tissue (commonly because of an ill fitting rpd)
16. must be surgically removed
• Severe bone resorption (particularly because of trauma) - surgical
ridge augmentation
Ridge Contact
• Pressure free contact without blanching.
• In esthetic zone, the pontic should contact on the labial/ buccal
aspect.
• In mandibular posteriors hygienic pontic can be given.
Metal Sub Structure is compromised due to
• Limited edentulous space in Occluso gingival direction due to supra
eruption of opposing tooth.
• Limited space mesiodistally due to drifting of adjacent teeth
• Framework must provide uniform thickness for porcelain- cut back
wax uniformly
Metal ceramic junction should be 1.5 mm away from junction.
GINGIVAL AND PERIODONTAL BREAKDOWN
- Margins placement
- Integrity of contacts and margins
- Occlusion
17. Reasons for gingival breakdown
• Plaque retention
• Improper design
• Faulty margins
• Incorrect occlusal anatomy
• Over contoured retainer
• Inadequate embrasure
Treatment options:
• Give proper oral hygiene instructions
• Remake the bridge
Reasons for periodontal breakdown:
• General periodontal problems
• Local periodontal problems like
- Poor bridge design
- Incorrect assessment of abutment strength
- Insufficient abutment selected
- Traumatic occlusion
Treatment options:
• Remake the bridge
Supra Gingival Margins
Advantages
• Can be easily finished
• Easily cleanable
• Impressions easily recordable
• Easy evaluation at recall
18. Disadvantages
• Esthetically inferior
• Not indicated for short clinical crowns
• Not indicated in case of root sensitivity
Sub Gingival Margins
Indications
• Esthetic demands
• Caries removal
• Existing sub gingival restorations
• Crown lengthening.
Disadvantages
• Difficult to prepare
• Soft tissue prone to trauma
• Causes gingival & periodontal pathosis
• Difficult oral hygiene
• Metal margins seen through gingival.
19. CARIES
• Caries occouring on the margin of the retainer,
• Caries affecting indirectly by starting elsewhere on the tooth and
spreading.
• Caries due to cementation failure.
Reasons for caries:
• Poor oral hygiene
• Open margins
• Faulty contacts
Treatment options:
• Use conventional filling materials
• Correction of crowns and bridges if possible
• Remake the bridge
NECROSIS OF PULP
Can occour at three stages
- Prior to preparation
- During preparation
- After preparation
20. Reasons for pulp necrosis:
• Increased occlusal trauma
• Increased heat during preparation
• No pulp protection
Other reasons for pulp necrosis:
• Speed, size, and type of the rotating instrument
• The amount of pressure used
• Depth of remaining dentin
• Vibration
• Coolants
• Desiccation
• Chemical injury
TTrreeaattmmeenntt ooppttiioonnss::
•• FFoorr aanntteerriioorr tteeeetthh –– aappiicceeccttoommyy aanndd rreettrrooggrraaddee ffiilllliinngg
•• FFoorr ppoosstteerriioorr tteeeetthh –– eennddooddoonnttiicc tthheerraappyy
•• RReemmaakkee tthhee bbrriiddggee
ESTHETIC FAILURES
Requirements for Esthetic Restorations
Proper shade selection
Correct tooth preparation
Avoidance of grey margins
Prevention of metal exposure
Final impression
21. Reasons for Esthetic Failure
• Failure to identify patient expectations regarding esthetics
• Improper shade selection
• Failure to transfer shade selection to laboratory
• Excessive metal thickness at incisal and cervical regions
• Over glaze or too much smooth surface
• Metal exposure in connector, cervical, and incisal region
• Dark space in cervical third due to improper pontic selection
(anteriors)
• Failed to produce incisal and proximal translucency
• Improper contouring
• Failure to harmonize contra-lateral tooth morphology- contour,
colour, position, angulations
• Discoloration of facing
Shade Selection
• Walls and surroundings should be in neutral colour or blue
• Never select under direct sunlight
• Upright position of the patient
• Use squint test
• Teeth should be clean and unstained
22. • Shade selection should be done before teeth preparation
• Don’t dry the tooth while selecting the shade
• Canine is the darkest tooth
• Premolars lighter shade than canine
• Maxillary anteriors are missing, shade of the mandibular anteriors is
considered
• In case of a non-vital tooth, cover it and select the shade of the
adjacent tooth.
Other Biologic bridge failure are
Fracture of tooth
Reasons for fracture:
• Improper abutment selection
• Wear of tooth
• Increased occlusal forces
Treatment options:
• Remake the bridge using more abutment teeth.
Temporo-mandibular joint problems
24. Conclusion
Failures most often occur because of violation of principles either
collectively or individually and for the most part are due to attempted
short-cuts or positive indifference and inexcusable ignorance on the
part of those concerned. Whatever said and done, at last it is only the
ability of a Prosthodontist which determines the success or failure of a
fixed partial denture.
25. Bibliography
• Shillingburg HT, Hobo S, Whitsett LD, Jacobe R, and Brackett SE:
Fundamentals of fixed prosthodontics, ed. 3, Chicago, 2001, Quintessence,
Inc.
• Tylman’s theory and practice of fixed Prosthodontics,8th edi,1989,William
F.P.Malone, David .L.Koth
• Roberts DH: Fixed bridge prosthesis, ed. 1, Bristol, 1973, John Wright &
Sons.
• Rosenstiel SF, Land MF and Fujimoto J: Contemporary fixed
prosthodontics, 2001, ed. 3, N.Delhi, Harcourt.
• Longevity of fixed partial dentures,JPD,Vol 78,Issue 2,Pg 127-131,Aug
1997.
• Failures related to crown and fixed partial dentures fabricated in Nigerian
dental school, Journal of contemporary dental practise, Vol 6, No 4,Nov
15,2005.
• Clinical complications in fixed Prosthodontics, JPD,2003,90 Vol, pg 31-41
26. A seminar on
Failures in fpd
Presented by
Dr.G.MANMOHAN,
Final year P.G Student,
Date: 12-07-08.
Signature of Prof & HOD
SIBAR INSTITUTE OF DENTAL SCIENCES
Guntur-522509