Fire alarm system
•Download as PPTX, PDF•
1 like•1,897 views
The document describes a student project to design a low-cost fire alarm system for single-family homes. The system will use an Arduino board along with sensors like a flame sensor and buzzer to detect fires at different locations in the home. When smoke or fire is detected, the system will alert residents through an alarm. The circuit diagram and requirements are provided. The conclusion states that the project aims to create a microcontroller-based fire alarm that functions similarly to systems used in commercial buildings but at an affordable price point for residential use.
Report
Share
Report
Share
Recommended
Fire alarm system Research
Detailed explaination of how fire alarm system works in a building, its networking systems and what are the minimum requirements needed for a fire protection system in a building.
Iot based fire alarm system
The document describes a project report for an IoT based fire alarm system using ESP8266 Wi-Fi modules and MQTT. The system uses temperature and flame sensors to detect fire outbreaks and sends alerts to a control station over Wi-Fi to trigger actuators like buzzers for response. The sensors monitor physical quantities which are processed by an ESP8266 microcontroller and sent via MQTT to notify authorities and allow remote monitoring and control of the system.
Fire alarm
The document describes a simple fire detection circuit using a thermistor. The circuit uses a potential divider configuration with a thermistor and resistor to sense temperature changes. When the temperature and thermistor resistance rises due to heat, the voltage drop across the resistor increases, turning on a transistor and activating a buzzer alert. This simple, low-cost circuit can be used for fire detection in homes, schools, industries, and research facilities.
IoT Based Fire Alarm and Monitoring System
This paper has proposed an internet of things (IoT) based fire alarm and monitoring system best suited for industrial and
home applications.
low cost fire alarm circuit
This document describes a low cost fire alarm circuit project. It includes an introduction to fire alarms and their importance. The circuit uses transistors as heat sensors to detect a fire and trigger a relay connected to alarms. When the temperature rises, the leakage current of one transistor increases, biasing a second one on and activating the relay. The circuit provides fire detection at low cost with simple components and circuitry. It has advantages of low price, ease of use and portability but cannot detect extremely high temperatures. The summary aims to capture the key purpose, components, working and benefits of the circuit in 3 sentences or less.
Fire Alarm, Smoke Detector and Automatic Sprinkle System
This document describes a fire alarm and smoke detector system designed using digital logic. The system uses inputs from an emergency switch, smoke detector, and main switch. It outputs a fire alarm and activates an automatic sprinkler system. The logic design includes OR gates, AND gates, a JK flip flop timer set to 3 seconds, a 1Hz clock, 7 segment displays, and inverters. When the smoke detector or emergency switch is activated, the alarm will sound for 3 seconds before automatically shutting off the sprinkler and alarm. The group's responsibilities for the project are also outlined.
FIRE DETECTION AND ELETRICAL POWER ON/OFF CONTROL IN HOME/INDUSTRY USING GSM
The idea behind this project is to use the existing GSM infrastructure. So, all the operations involve the GSM system also. As we send any SMS, it goes through the GSM system. Any sent SMS can be received if we use a SIM card and GSM module. To operate any GSM modem, we have to use the AT commands to operate them. For example, if any SMS arrives the GSM modem sends the serial data in ASCII format. We can read these data if we connect the modem with the serial port of the microcontroller at the baud rate of 9600. As the microcontroller comes to know that a SMS has been arrived, it can sent a proper AT command to read the SMS. The reading of SMS returns the mobile number of sender, the time and much more information. We have to select the SMS part of the message. The starting string of the SMS is used as the password. As the password is matched, then the SMS arrival is assumed to be valid by the microcontroller otherwise, it ignores the SMS. Working of “FIRE DETECTION AND ELETRICAL POWER ON/OFF CONTROL IN HOME/INDUSTRY USING GSM” is very simple.
Fire fighting robot ppt
The document describes an automatic firefighting robot that can detect and extinguish fires. It uses sensors to detect temperature, smoke, and flames. If the sensors detect a fire, the microcontroller activates a water pump to extinguish it. The robot reduces human labor needed for firefighting and decreases damage from fires. It is designed to monitor hazardous areas for natural disasters and bomb explosions.
Recommended
Fire alarm system Research
Detailed explaination of how fire alarm system works in a building, its networking systems and what are the minimum requirements needed for a fire protection system in a building.
Iot based fire alarm system
The document describes a project report for an IoT based fire alarm system using ESP8266 Wi-Fi modules and MQTT. The system uses temperature and flame sensors to detect fire outbreaks and sends alerts to a control station over Wi-Fi to trigger actuators like buzzers for response. The sensors monitor physical quantities which are processed by an ESP8266 microcontroller and sent via MQTT to notify authorities and allow remote monitoring and control of the system.
Fire alarm
The document describes a simple fire detection circuit using a thermistor. The circuit uses a potential divider configuration with a thermistor and resistor to sense temperature changes. When the temperature and thermistor resistance rises due to heat, the voltage drop across the resistor increases, turning on a transistor and activating a buzzer alert. This simple, low-cost circuit can be used for fire detection in homes, schools, industries, and research facilities.
IoT Based Fire Alarm and Monitoring System
This paper has proposed an internet of things (IoT) based fire alarm and monitoring system best suited for industrial and
home applications.
low cost fire alarm circuit
This document describes a low cost fire alarm circuit project. It includes an introduction to fire alarms and their importance. The circuit uses transistors as heat sensors to detect a fire and trigger a relay connected to alarms. When the temperature rises, the leakage current of one transistor increases, biasing a second one on and activating the relay. The circuit provides fire detection at low cost with simple components and circuitry. It has advantages of low price, ease of use and portability but cannot detect extremely high temperatures. The summary aims to capture the key purpose, components, working and benefits of the circuit in 3 sentences or less.
Fire Alarm, Smoke Detector and Automatic Sprinkle System
This document describes a fire alarm and smoke detector system designed using digital logic. The system uses inputs from an emergency switch, smoke detector, and main switch. It outputs a fire alarm and activates an automatic sprinkler system. The logic design includes OR gates, AND gates, a JK flip flop timer set to 3 seconds, a 1Hz clock, 7 segment displays, and inverters. When the smoke detector or emergency switch is activated, the alarm will sound for 3 seconds before automatically shutting off the sprinkler and alarm. The group's responsibilities for the project are also outlined.
FIRE DETECTION AND ELETRICAL POWER ON/OFF CONTROL IN HOME/INDUSTRY USING GSM
The idea behind this project is to use the existing GSM infrastructure. So, all the operations involve the GSM system also. As we send any SMS, it goes through the GSM system. Any sent SMS can be received if we use a SIM card and GSM module. To operate any GSM modem, we have to use the AT commands to operate them. For example, if any SMS arrives the GSM modem sends the serial data in ASCII format. We can read these data if we connect the modem with the serial port of the microcontroller at the baud rate of 9600. As the microcontroller comes to know that a SMS has been arrived, it can sent a proper AT command to read the SMS. The reading of SMS returns the mobile number of sender, the time and much more information. We have to select the SMS part of the message. The starting string of the SMS is used as the password. As the password is matched, then the SMS arrival is assumed to be valid by the microcontroller otherwise, it ignores the SMS. Working of “FIRE DETECTION AND ELETRICAL POWER ON/OFF CONTROL IN HOME/INDUSTRY USING GSM” is very simple.
Fire fighting robot ppt
The document describes an automatic firefighting robot that can detect and extinguish fires. It uses sensors to detect temperature, smoke, and flames. If the sensors detect a fire, the microcontroller activates a water pump to extinguish it. The robot reduces human labor needed for firefighting and decreases damage from fires. It is designed to monitor hazardous areas for natural disasters and bomb explosions.
Fire detection system using arduino
Here you will find details about how you can make a fire detection system by using arduino and flame sensor. We have also added the budget you need to make this project.
Fire fighting final report
The document discusses the design and development of a firefighting robot that can detect and extinguish fires autonomously using sensors to detect fires and a water pump or blower to put out the flames. It describes the components needed for the robot like microcontrollers, motors, sensors, and discusses how fuzzy logic can be used to control the robot. The overall purpose of the robot is to fight fires remotely to protect firefighters and limit property damage from fires.
Automatic Room Lights Controller Using Arduino & PIR Sensor
The document describes an automatic room light control system using an Arduino microcontroller and PIR motion sensor. The system is designed to automatically turn lights on when motion is detected by the PIR sensor, and turn lights off after a period of no motion. The system components include a PIR sensor to detect motion, an Arduino Uno microcontroller for processing and control, and a relay to control power to the lights. When motion is detected, the PIR sensor sends a signal to the Arduino, which then activates the relay to turn on the lights. After a set time of no motion, the Arduino deactivates the relay to turn off the lights. The system is intended to automatically control room lights to save
Presentation Fire Alarm_Project
This document describes the components and working of a simple fire alarm circuit project. The circuit uses a thermistor to detect changes in temperature, which then triggers a transistor and sounds a buzzer. Key components are a thermistor, transistor, diode, capacitor, resistors and a 6V buzzer. As temperature rises, the thermistor's resistance decreases, increasing the voltage across a resistor to turn on the transistor and activate the buzzer. The circuit aims to detect fires and prevent damage through a simple, low-cost design.
Automatic fire detector
This document describes a prototype automatic fire alarm and extinguishing system. It works by using a thermostat to detect rises in temperature caused by fire. When fire is detected, the system sounds an audio alarm and activates a fire extinguishing system using a water pump. The system components include resistors, capacitors, transistors, diodes, a buzzer, LED, circuit board, wires and a transformer to power the system and convert AC to DC current required by the water pump. The thermostat senses temperature increases from fire to trigger the alarm and extinguishing response.
CCTV Camera Presentation
How Do CCTV Camera Work?
CCTV Camera Benefits
CCTV System Types
CCTV Camera Types
Installation
Configuration
Automatic Room Light Controller Using Arduinom & PIR Sensor
Automatic Room Lights System using Arduino is a very useful project as you need not worry about turning on and off the switches every time you want to turn on the lights. The main components of the Automatic Room Lights project are Arduino, PIR Sensor and the Relay Module.
Burglar alarm ppt
This document summarizes a project on creating a burglar alarm circuit using common electronic components. The objective is to ensure security of property using a device that monitors for burglary attempts using a light dependent resistor, variable resistor, LED, IC 555 timer chip, and 9V battery connected on a breadboard. Diagrams of the circuit and its working principle are provided, along with components used and conclusions about home security being an important growing field with technological advances improving efficiency of alarms over time.
project report on fire alarm
This document summarizes several electronic fire alarm circuit designs. It describes a thermistor-based circuit that uses a thermistor as a heat sensor whose resistance decreases with increasing temperature. When the thermistor gets hot, it causes an alarm to sound. A low-cost circuit is also presented that uses a transistor as a fire sensor whose leakage current increases with temperature, triggering an alarm. An alternative low-power circuit is mentioned. Finally, a smoke detector circuit is described that uses a photo interrupter module and 555 timer chip to detect smoke and sound an alarm. The document concludes that electronic circuits can provide efficient fire detection and alarm capabilities.
smart sensor
smart sensors - mechatronics
Download:
http://skillcruise.com/academics/robotics-mechatronics/sensors/
FIRE ALARM SYSTEM PPT.pptx
This document describes building an IoT-based fire alarm system using a NodeMCU ESP8266 and Blynk. The system uses a flame sensor to detect fire and smoke and connects to a buzzer and LED for alerts. When the flame sensor detects fire, it triggers the buzzer and turns on the LED. The system is also connected to Blynk to send notifications. Code is written and uploaded to the NodeMCU to define pins for the sensors, buzzer and LED. When the flame sensor detects fire, it sets the LED and buzzer to alert people and notifies users through Blynk.
Automatic gas detection system
This document describes a gas leakage detection and alert system using an Arduino board. The system uses an LPG gas sensor to detect gas leaks and triggers an alarm with lights and sounds. If a leak is detected, it will also send an alert via Bluetooth. It is designed for home safety to prevent accidents from gas leaks in the kitchen. When fully built, the system will help prevent accidents and can be enhanced for industrial use.
Fire fighting robot using arduino
Working Concept of Fire Fighting Robot: The main brain of this project is the Arduino, but in-order to sense fire we use the Fire sensor module (flame sensor) that is shown below. As you can see these sensors have an IR Receiver (Photodiode) which is used to detect the fire.
Cctv.
This document provides an overview of CCTV (closed-circuit television) systems, including their components and purposes. CCTV systems use video cameras to transmit signals to specific monitors for security and surveillance. They can help reduce costs and crime while encouraging good behavior. The key elements of a CCTV system are cameras, lenses, monitors, a DVR or NVR for recording, cables to connect components, and storage devices to save footage. CCTV systems can be analog, using coaxial cables, or digital/IP based, using Ethernet cables. They have various applications like monitoring bars, cash rooms, hospitals, public spaces, and detecting theft or vandalism.
GSM BASED FIRE ALARM SYSTEM
This document describes a fire alarm system project that sends SMS messages to mobile phones when a fire occurs. The system uses an Arduino microcontroller connected to a GSM module for sending SMS messages, an LM35 temperature sensor to detect rises in temperature indicating a fire, and a 16 character LCD display to show system information. The circuit diagram and technical specifications of the main components are provided.
Gas and smoke detection system using arduino
To study the working principle of gas and smoke detector system
To design and construct of the gas and smoke detector system and control system using Arduino with Bluetooth module
To implement gas and smoke design in the project
At the very first time of smoke creation so that avoided the unwanted accident
Burglar security alarm
This document summarizes a student group project on designing a burglar alarm circuit. It introduces the group members and explains that the alarm is intended to provide security for homes and offices. It then lists the basic circuit elements needed, including transistors, capacitors, resistors, and a buzzer. The document provides a circuit diagram and explains the functioning of the circuit in three phases: initially the capacitor filters DC while allowing AC, then the transistors amplify the voltage to trigger the buzzer, and finally closing the circuit cuts off the buzzer.
Fire Fighting Robot by saurabh
This document describes a firefighting robot that can sense and locate fires using sensors like infrared and heat sensors. It navigates using six legs to obstacles. When a fire is detected, the robot stops and signals its location to the remote control room. It is powered by a power supply system that includes a step-down transformer, rectifier, and regulator. The robot aims to detect fires efficiently and help fight small fires, though it has limitations like a limited battery life and inability to fight large fires. Potential applications include server rooms, industrial areas, and camps to prevent wildfires. Future work could include delivering other fire extinguishing agents like carbon dioxide.
physics project
A fire alarm system detects smoke, fire, or water flow using devices like smoke detectors, heat detectors, and manual pull stations. When activated, these devices alert people through visual and audio appliances like LED bulbs and speakers. The circuit diagram shows how a basic fire alarm works using a battery, starter, bulb, speaker, and resistance to power the system and create alerts upon heat detection via a tube light starter that closes the circuit when heated.
PROJECT MINI DEFENCE PRESENTATION.pptx
The document describes the design of an intelligent fire alarm system using temperature and smoke sensors with Android connectivity. The system aims to provide early detection of fires through sensors and notify occupants through connectivity to Android devices. It analyzes existing fire alarm systems, identifies problems with complexity and cost, and proposes the design of a low-cost system using an Arduino board connected to temperature and smoke sensors. The system would detect temperature increases or smoke, sound an alarm, and send alerts to registered Android devices with the location identified through a GPS module. The document outlines the objectives, significance, limitations and methodology of the proposed intelligent fire alarm system design.
Design and Build of an Arduino-Powered Fire Detection System. pptx
Design and Build of an Arduino-Powered Fire Detection System
More Related Content
What's hot
Fire detection system using arduino
Here you will find details about how you can make a fire detection system by using arduino and flame sensor. We have also added the budget you need to make this project.
Fire fighting final report
The document discusses the design and development of a firefighting robot that can detect and extinguish fires autonomously using sensors to detect fires and a water pump or blower to put out the flames. It describes the components needed for the robot like microcontrollers, motors, sensors, and discusses how fuzzy logic can be used to control the robot. The overall purpose of the robot is to fight fires remotely to protect firefighters and limit property damage from fires.
Automatic Room Lights Controller Using Arduino & PIR Sensor
The document describes an automatic room light control system using an Arduino microcontroller and PIR motion sensor. The system is designed to automatically turn lights on when motion is detected by the PIR sensor, and turn lights off after a period of no motion. The system components include a PIR sensor to detect motion, an Arduino Uno microcontroller for processing and control, and a relay to control power to the lights. When motion is detected, the PIR sensor sends a signal to the Arduino, which then activates the relay to turn on the lights. After a set time of no motion, the Arduino deactivates the relay to turn off the lights. The system is intended to automatically control room lights to save
Presentation Fire Alarm_Project
This document describes the components and working of a simple fire alarm circuit project. The circuit uses a thermistor to detect changes in temperature, which then triggers a transistor and sounds a buzzer. Key components are a thermistor, transistor, diode, capacitor, resistors and a 6V buzzer. As temperature rises, the thermistor's resistance decreases, increasing the voltage across a resistor to turn on the transistor and activate the buzzer. The circuit aims to detect fires and prevent damage through a simple, low-cost design.
Automatic fire detector
This document describes a prototype automatic fire alarm and extinguishing system. It works by using a thermostat to detect rises in temperature caused by fire. When fire is detected, the system sounds an audio alarm and activates a fire extinguishing system using a water pump. The system components include resistors, capacitors, transistors, diodes, a buzzer, LED, circuit board, wires and a transformer to power the system and convert AC to DC current required by the water pump. The thermostat senses temperature increases from fire to trigger the alarm and extinguishing response.
CCTV Camera Presentation
How Do CCTV Camera Work?
CCTV Camera Benefits
CCTV System Types
CCTV Camera Types
Installation
Configuration
Automatic Room Light Controller Using Arduinom & PIR Sensor
Automatic Room Lights System using Arduino is a very useful project as you need not worry about turning on and off the switches every time you want to turn on the lights. The main components of the Automatic Room Lights project are Arduino, PIR Sensor and the Relay Module.
Burglar alarm ppt
This document summarizes a project on creating a burglar alarm circuit using common electronic components. The objective is to ensure security of property using a device that monitors for burglary attempts using a light dependent resistor, variable resistor, LED, IC 555 timer chip, and 9V battery connected on a breadboard. Diagrams of the circuit and its working principle are provided, along with components used and conclusions about home security being an important growing field with technological advances improving efficiency of alarms over time.
project report on fire alarm
This document summarizes several electronic fire alarm circuit designs. It describes a thermistor-based circuit that uses a thermistor as a heat sensor whose resistance decreases with increasing temperature. When the thermistor gets hot, it causes an alarm to sound. A low-cost circuit is also presented that uses a transistor as a fire sensor whose leakage current increases with temperature, triggering an alarm. An alternative low-power circuit is mentioned. Finally, a smoke detector circuit is described that uses a photo interrupter module and 555 timer chip to detect smoke and sound an alarm. The document concludes that electronic circuits can provide efficient fire detection and alarm capabilities.
smart sensor
smart sensors - mechatronics
Download:
http://skillcruise.com/academics/robotics-mechatronics/sensors/
FIRE ALARM SYSTEM PPT.pptx
This document describes building an IoT-based fire alarm system using a NodeMCU ESP8266 and Blynk. The system uses a flame sensor to detect fire and smoke and connects to a buzzer and LED for alerts. When the flame sensor detects fire, it triggers the buzzer and turns on the LED. The system is also connected to Blynk to send notifications. Code is written and uploaded to the NodeMCU to define pins for the sensors, buzzer and LED. When the flame sensor detects fire, it sets the LED and buzzer to alert people and notifies users through Blynk.
Automatic gas detection system
This document describes a gas leakage detection and alert system using an Arduino board. The system uses an LPG gas sensor to detect gas leaks and triggers an alarm with lights and sounds. If a leak is detected, it will also send an alert via Bluetooth. It is designed for home safety to prevent accidents from gas leaks in the kitchen. When fully built, the system will help prevent accidents and can be enhanced for industrial use.
Fire fighting robot using arduino
Working Concept of Fire Fighting Robot: The main brain of this project is the Arduino, but in-order to sense fire we use the Fire sensor module (flame sensor) that is shown below. As you can see these sensors have an IR Receiver (Photodiode) which is used to detect the fire.
Cctv.
This document provides an overview of CCTV (closed-circuit television) systems, including their components and purposes. CCTV systems use video cameras to transmit signals to specific monitors for security and surveillance. They can help reduce costs and crime while encouraging good behavior. The key elements of a CCTV system are cameras, lenses, monitors, a DVR or NVR for recording, cables to connect components, and storage devices to save footage. CCTV systems can be analog, using coaxial cables, or digital/IP based, using Ethernet cables. They have various applications like monitoring bars, cash rooms, hospitals, public spaces, and detecting theft or vandalism.
GSM BASED FIRE ALARM SYSTEM
This document describes a fire alarm system project that sends SMS messages to mobile phones when a fire occurs. The system uses an Arduino microcontroller connected to a GSM module for sending SMS messages, an LM35 temperature sensor to detect rises in temperature indicating a fire, and a 16 character LCD display to show system information. The circuit diagram and technical specifications of the main components are provided.
Gas and smoke detection system using arduino
To study the working principle of gas and smoke detector system
To design and construct of the gas and smoke detector system and control system using Arduino with Bluetooth module
To implement gas and smoke design in the project
At the very first time of smoke creation so that avoided the unwanted accident
Burglar security alarm
This document summarizes a student group project on designing a burglar alarm circuit. It introduces the group members and explains that the alarm is intended to provide security for homes and offices. It then lists the basic circuit elements needed, including transistors, capacitors, resistors, and a buzzer. The document provides a circuit diagram and explains the functioning of the circuit in three phases: initially the capacitor filters DC while allowing AC, then the transistors amplify the voltage to trigger the buzzer, and finally closing the circuit cuts off the buzzer.
Fire Fighting Robot by saurabh
This document describes a firefighting robot that can sense and locate fires using sensors like infrared and heat sensors. It navigates using six legs to obstacles. When a fire is detected, the robot stops and signals its location to the remote control room. It is powered by a power supply system that includes a step-down transformer, rectifier, and regulator. The robot aims to detect fires efficiently and help fight small fires, though it has limitations like a limited battery life and inability to fight large fires. Potential applications include server rooms, industrial areas, and camps to prevent wildfires. Future work could include delivering other fire extinguishing agents like carbon dioxide.
physics project
A fire alarm system detects smoke, fire, or water flow using devices like smoke detectors, heat detectors, and manual pull stations. When activated, these devices alert people through visual and audio appliances like LED bulbs and speakers. The circuit diagram shows how a basic fire alarm works using a battery, starter, bulb, speaker, and resistance to power the system and create alerts upon heat detection via a tube light starter that closes the circuit when heated.
What's hot (20)
Automatic Room Lights Controller Using Arduino & PIR Sensor
Automatic Room Lights Controller Using Arduino & PIR Sensor
Automatic Room Light Controller Using Arduinom & PIR Sensor
Automatic Room Light Controller Using Arduinom & PIR Sensor
Similar to Fire alarm system
PROJECT MINI DEFENCE PRESENTATION.pptx
The document describes the design of an intelligent fire alarm system using temperature and smoke sensors with Android connectivity. The system aims to provide early detection of fires through sensors and notify occupants through connectivity to Android devices. It analyzes existing fire alarm systems, identifies problems with complexity and cost, and proposes the design of a low-cost system using an Arduino board connected to temperature and smoke sensors. The system would detect temperature increases or smoke, sound an alarm, and send alerts to registered Android devices with the location identified through a GPS module. The document outlines the objectives, significance, limitations and methodology of the proposed intelligent fire alarm system design.
Design and Build of an Arduino-Powered Fire Detection System. pptx
Design and Build of an Arduino-Powered Fire Detection System
FIRE ALARM SYSTEM BASED ON MCU FOR INDUSTRY APPLICATION
1. The document describes a proposed wireless fire alarm system based on Internet of Things technology using a microcontroller and infrared flame sensor.
2. When a fire is detected by the sensor, the system activates a local alarm, sends an SMS to the user, and calls the user. It also allows the user to check the home's status by sending an SMS to the system.
3. A prototype of the proposed system was created that successfully implemented the intended functionalities of detecting fire and alerting the user with an average latency of less than 30 seconds.
IoT Based Automatic Gas, Smoke and Fire Alert System
The goal of this system is to build an IoT based automatic gas, smoke and fire alert system via Node MCU. We use a Node MCU, sensors, a microcontroller system, and a few more electronic devices in the current endeavor. This endeavor has easy to use gas, smoke and fire detection. When people are outside of industries, residences, or marketplaces, they are not automatically informed about sudden events caused by fire, gas, or smoke. Not even fire departments receive the information instantly. People suffer greatly as a result, and most of the time, fire nearly destroys residences, companies, and marketplaces. However, our system may be able to help by automatically alerting concerned people to the presence of smoke, gas and fire. As a result, people will be able to arrive at the location swiftly and act promptly. For the system to obtain the data from the fire, gas and smoke sensors, a microcontroller needs to be installed to control every device involved in this work. Wi Fi shield functions a way to connect devices with the network. This system uses an Android app to retrieve the sensors data. This experiment analyses the rooms performance in various fire, gas, and smoke conditions as well as burning objects. The researchers found that when smoke concentrations rise above 100 parts per million, people may get fatal heart attacks, coughing fits, and stinging eyes. However, when the smoke content hits 40 parts per million, our system will automatically send out an alert message. With the help of our technology, we hope that individuals will be able to save their lives and property. Md. Abdur Rahim | Md. Sanjidur Rahman | Rafat Ara "IoT Based Automatic Gas, Smoke and Fire Alert System" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd63446.pdf Paper Url: https://www.ijtsrd.com/other-scientific-research-area/other/63446/iot-based-automatic-gas-smoke-and-fire-alert-system/md-abdur-rahim
Smoke Alert System For Dye Industries Using IoT
This document describes a smoke alert system for dye industries using IoT technology. The system uses an Arduino Uno microcontroller connected to an MQ2 smoke sensor and buzzer. When smoke is detected above a threshold level, the buzzer is activated to alert users. The Arduino also interfaces with an LCD display to show the system status and whether smoke or overheating is detected. The goal is to quickly detect fires or excessive smoke in dye industries to minimize property damage and safety risks.
DESIGN CHALLENGES IN WIRELESS FIRE SECURITY SENSOR NODES
A design of simple hardware circuit with different kind of fire sensors enables every user to use this
wireless fire security system. The challenges in designing the nodes with various types of fire sensors are
discussed and the methods to overcome design problems are also analyzed. The circuit is interfaced with
the different types of sensor to sense different fire sources such as gas leakage, smoke, and heat. The cost,
circuit components, design requirements, power requirements of sensor node are minimized. The methods
to improve the quality of system to detect fire are analyzed. The system is fully controlled by the PIC
microcontroller.
DESIGN CHALLENGES IN WIRELESS FIRE SECURITY SENSOR NODES
A design of simple hardware circuit with different kind of fire sensors enables every user to use this wireless fire security system. The challenges in designing the nodes with various types of fire sensors are
discussed and the methods to overcome design problems are also analyzed. The circuit is interfaced with
the different types of sensor to sense different fire sources such as gas leakage, smoke, and heat. The cost,
circuit components, design requirements, power requirements of sensor node are minimized. The methods
to improve the quality of system to detect fire are analyzed. The system is fully controlled by the PIC
microcontroller. All the sensors and detectors are interconnected to PIC microcontroller by using various
types of interface circuits. The PIC microcontroller will continuously monitor all the sensors and if it senses
any security problem then the microcontroller will send the information to the PC central monitoring station wirelessly for a short distance of 300m indoor/1500m outdoor using zigbee technology. The gas
sensor, light sensor, smoke detector sensor, IR sensor, temperature & humidity sensor, fire sensor are interfaced with microcontroller to detect abnormal fire conditions in the environment in all possible ways.
Intelligent fire detection and alert system using labVIEW
Fire detection systems are designed to discover fires and allow the safe evacuation of occupants as well as protecting the safety of emergency response personnel. This paper describes the design and development of a fire detection and alert system. Temperature and flame sensors are used to indicate the occurrence of fire. This work consists of two parts, which are transmitter and receiver, both using ZigBee wireless technology. Arduino Uno is used as the microcontroller at the transmitter part to control the sensor nodes and give alert when over temperature and flame are detected. At the transmitter, the collected data from the sensors are transmitted by an XBee module operated as router node. At the receiver side, an XBee coordinator module which is attached to a computer using USB to serial communication captured the data for further processing. In addition, an interactive and user-friendly Graphical User Interface (GUI) is developed. LabVIEW software is used to design the GUI which displays and analyze the possibility of fire happening. The system can display the fire location and provides early warning to allow occupants to escape the building safely.
wireless security control system and sensor network for smoke and fire detection
This technical paper presents a wireless security control system and sensor network for smoke and fire detection. The system uses a microcontroller, smoke sensor, fire sensor, LCD, buzzer, and GSM to detect smoke and fire, display information, sound an alarm, and alert authorized individuals via text message. It aims to protect homes and public areas from fire accidents in a low-cost and automated way. The system has applications in buses, trains, forests, industries, and residential/commercial areas and offers advantages like reduced manpower needs, low cost, time savings, and increased safety.
FIRE ALARM.pptx
This document discusses the components, working principle, and applications of a basic fire alarm circuit using an IR LED sensor. It describes how the circuit detects infrared radiation from fire to activate a buzzer and LED. Real-life applications discussed include optical and ionization smoke detectors, carbon monoxide detectors, and wireless technology in advanced fire alarm systems. Advantages of fire alarms are early detection to avoid damage, while disadvantages can include false alarms and slower response to smoldering fires.
Smart and Secure Home using IoT
1. The document describes a smart and secure home system using IoT that allows users to control home appliances like AC and washing machines remotely through an internet connection from anywhere in the world.
2. The system uses an Arduino Mega board connected to sensors and a GSM modem to monitor temperature and motion in the home. If thresholds are exceeded, the system sends SMS alerts to users. It can also control appliances through relays.
3. The system includes a fire emergency system that uses a temperature sensor to detect fires and alert users through SMS, as well as a security system using a PIR motion sensor to detect intruders and notify users. This allows remote monitoring and control of the home while providing
Advanced Fire Monitoring System
The most well known reasons for building fires were from warming, electrical appropriation, and lighting frameworks. Chimneys utilized during the special seasons and colder months can make risks also. An alarm framework incorporates numerous segments and highlights to help keep you secured. It spares lives by notice building inhabitants of crises so they can escape risk. In case of a fire, they give discovery and warning without you busy. They can likewise consequently dispatch the local group of fire fighters to your area. At the point when an alarm is actuated, it supports your security and wellbeing during a hazardous occasion. A fire location framework utilizes a smoke alarm to distinguish a fire before it really begins. The point of the framework planned is to caution the removed land owner with proficiency and rapidly by causing short message SMS by means of GSM network. Sreejith S P | Kuldeep Baban Vayadande "Advanced Fire Monitoring System" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-1 , December 2020, URL: https://www.ijtsrd.com/papers/ijtsrd37978.pdf Paper URL : https://www.ijtsrd.com/computer-science/artificial-intelligence/37978/advanced-fire-monitoring-system/sreejith-s-p
IoT Based Home Automation System_revised_27_06_2021.pptx
This document describes the design and implementation of a home automation system using IoT. The system uses an Arduino microcontroller connected to various sensors to monitor temperature, gas, fire and motion. When thresholds are exceeded, the system triggers appliances like exhaust fans and alerts authorities via SMS. It allows remote monitoring and control of home appliances over WiFi. The objectives are to develop a low-cost home security, safety and energy saving system. Block diagrams and lists of equipment are provided. Advantages include easy access and control from anywhere, reduced human intervention, improved safety and efficiency.
Design and Implementation of Bluetooth Based Industrial Automation
The paper Design and Implementation of Bluetooth Based Industrial Automation is used to control the circuit from a short distance during fire accidents .In this project we are using microcontroller, LDR ,flame sensor, Bluetooth sensor. Microcontroller is used to control the entire device by giving the commands. The project presents the design and implementation of low cost but a flexible and secure Bluetooth based industrial automation system. The communication between the cell phone and Arduino Bluetooth board is wireless. B. Shiva Kuamar | B. Satya Satwik | N. Anil Kumar | A. V. Tarun Kumar ""Design and Implementation of Bluetooth Based Industrial Automation"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-3 , April 2019, URL: https://www.ijtsrd.com/papers/ijtsrd23180.pdf
Paper URL: https://www.ijtsrd.com/engineering/electrical-engineering/23180/design-and-implementation-of-bluetooth-based-industrial-automation/b-shiva-kuamar
Bluetooth Based Fire Detection and Robust Protection System By Using Arduino
The article discusses international issues. It mentions that globalization has increased economic interdependence between nations while also raising tensions over immigration and trade. Solutions will require cooperation and compromise between countries to balance economic and security concerns in a fair manner.
PPT 3 fire.pptx fire detection and extinguisher
This document describes the design of a fire detection and extinguishing system using IoT technology. The system uses flame, smoke, and temperature sensors to detect fires and activates a water pump and sprinklers to extinguish the fire. It is intended to automatically detect and put out small fires without human intervention in order to reduce risks to firefighters. The system would detect fires, locate the fire source, and use an on-board water pump and sprinklers to extinguish the fire from a safe, remote distance.
IOT PROJECT.pptx
This document presents a project on an Internet of Things (IoT) fire notification system using a NodeMCU ESP8266 microcontroller board with a Blynk application. The system uses a flame sensor to detect fire and sends notifications to the Blynk app. It discusses the hardware components including the NodeMCU board and flame sensor. It also explains how to connect the components, set up the Blynk app, and includes diagrams of the circuit. Advantages of wireless fire alarm systems like easier installation and battery-powered operation are presented, as well as the disadvantage of needing to replace batteries.
csc project .docx
The document is a project report for an IoT-based smoke detection system. It describes the hardware and software components used in the system, including an MQ2 smoke sensor, Arduino Uno, GSM modem, LCD display, buzzer, relays, and ThingSpeak as the IoT platform. The system detects smoke using the sensor and sends an alert to ThingSpeak. Authorized users can then monitor the system status online. The report outlines the motivation to develop a modern alternative to traditional smoke detection that allows remote monitoring over the Internet of Things.
IRJET- Home Automation System using IoT
This document describes a home automation system using Internet of Things (IoT) technology to control lighting in smart rooms. The system uses a pair of infrared sensors and an Arduino chip to detect the number of people entering or leaving a room. When a person enters, the light turns on. It remains on while people are detected in the room. When the count reaches zero, meaning no people are detected, the light turns off. This system aims to conserve energy by automatically turning lights off in unoccupied rooms. It provides an energy-efficient model that could be used in homes, schools, offices and other settings.
Similar to Fire alarm system (20)
Design and Build of an Arduino-Powered Fire Detection System. pptx
Design and Build of an Arduino-Powered Fire Detection System. pptx
FIRE ALARM SYSTEM BASED ON MCU FOR INDUSTRY APPLICATION
FIRE ALARM SYSTEM BASED ON MCU FOR INDUSTRY APPLICATION
IoT Based Automatic Gas, Smoke and Fire Alert System
IoT Based Automatic Gas, Smoke and Fire Alert System
DESIGN CHALLENGES IN WIRELESS FIRE SECURITY SENSOR NODES
DESIGN CHALLENGES IN WIRELESS FIRE SECURITY SENSOR NODES
DESIGN CHALLENGES IN WIRELESS FIRE SECURITY SENSOR NODES
DESIGN CHALLENGES IN WIRELESS FIRE SECURITY SENSOR NODES
Intelligent fire detection and alert system using labVIEW
Intelligent fire detection and alert system using labVIEW
wireless security control system and sensor network for smoke and fire detection
wireless security control system and sensor network for smoke and fire detection
IoT Based Home Automation System_revised_27_06_2021.pptx
IoT Based Home Automation System_revised_27_06_2021.pptx
Iot based forest Fire detected system using audino
Iot based forest Fire detected system using audino
Design and Implementation of Bluetooth Based Industrial Automation
Design and Implementation of Bluetooth Based Industrial Automation
Bluetooth Based Fire Detection and Robust Protection System By Using Arduino
Bluetooth Based Fire Detection and Robust Protection System By Using Arduino
Recently uploaded
Embedded machine learning-based road conditions and driving behavior monitoring
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
ACEP Magazine edition 4th launched on 05.06.2024
This document provides information about the third edition of the magazine "Sthapatya" published by the Association of Civil Engineers (Practicing) Aurangabad. It includes messages from current and past presidents of ACEP, memories and photos from past ACEP events, information on life time achievement awards given by ACEP, and a technical article on concrete maintenance, repairs and strengthening. The document highlights activities of ACEP and provides a technical educational article for members.
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
Casting-Defect-inSlab continuous casting.pdf
Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
As digital technology becomes more deeply embedded in power systems, protecting the communication
networks of Smart Grids (SG) has emerged as a critical concern. Distributed Network Protocol 3 (DNP3)
represents a multi-tiered application layer protocol extensively utilized in Supervisory Control and Data
Acquisition (SCADA)-based smart grids to facilitate real-time data gathering and control functionalities.
Robust Intrusion Detection Systems (IDS) are necessary for early threat detection and mitigation because
of the interconnection of these networks, which makes them vulnerable to a variety of cyberattacks. To
solve this issue, this paper develops a hybrid Deep Learning (DL) model specifically designed for intrusion
detection in smart grids. The proposed approach is a combination of the Convolutional Neural Network
(CNN) and the Long-Short-Term Memory algorithms (LSTM). We employed a recent intrusion detection
dataset (DNP3), which focuses on unauthorized commands and Denial of Service (DoS) cyberattacks, to
train and test our model. The results of our experiments show that our CNN-LSTM method is much better
at finding smart grid intrusions than other deep learning algorithms used for classification. In addition,
our proposed approach improves accuracy, precision, recall, and F1 score, achieving a high detection
accuracy rate of 99.50%.
New techniques for characterising damage in rock slopes.pdf
rock mass characterization and New techniques for characterising damage in rock slopes
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
A review on techniques and modelling methodologies used for checking electrom...
The proper function of the integrated circuit (IC) in an inhibiting electromagnetic environment has always been a serious concern throughout the decades of revolution in the world of electronics, from disjunct devices to today’s integrated circuit technology, where billions of transistors are combined on a single chip. The automotive industry and smart vehicles in particular, are confronting design issues such as being prone to electromagnetic interference (EMI). Electronic control devices calculate incorrect outputs because of EMI and sensors give misleading values which can prove fatal in case of automotives. In this paper, the authors have non exhaustively tried to review research work concerned with the investigation of EMI in ICs and prediction of this EMI using various modelling methodologies and measurement setups.
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Sinan from the Delivery Hero mobile infrastructure engineering team shares a deep dive into performance acceleration with Gradle build cache optimizations. Sinan shares their journey into solving complex build-cache problems that affect Gradle builds. By understanding the challenges and solutions found in our journey, we aim to demonstrate the possibilities for faster builds. The case study reveals how overlapping outputs and cache misconfigurations led to significant increases in build times, especially as the project scaled up with numerous modules using Paparazzi tests. The journey from diagnosing to defeating cache issues offers invaluable lessons on maintaining cache integrity without sacrificing functionality.
Recycled Concrete Aggregate in Construction Part III
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
Unit-III-ELECTROCHEMICAL STORAGE DEVICES.ppt
Batteries -Introduction – Types of Batteries – discharging and charging of battery - characteristics of battery –battery rating- various tests on battery- – Primary battery: silver button cell- Secondary battery :Ni-Cd battery-modern battery: lithium ion battery-maintenance of batteries-choices of batteries for electric vehicle applications.
Fuel Cells: Introduction- importance and classification of fuel cells - description, principle, components, applications of fuel cells: H2-O2 fuel cell, alkaline fuel cell, molten carbonate fuel cell and direct methanol fuel cells.
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
Traditionally, dealing with real-time data pipelines has involved significant overhead, even for straightforward tasks like data transformation or masking. However, in this talk, we’ll venture into the dynamic realm of WebAssembly (WASM) and discover how it can revolutionize the creation of stateless streaming pipelines within a Kafka (Redpanda) broker. These pipelines are adept at managing low-latency, high-data-volume scenarios.
Computational Engineering IITH Presentation
This Presentation will give you a brief idea about what Computational Engineering at IIT Hyderabad has to offer.
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
Iron and Steel Technology towards Sustainable Steelmaking
Recycled Concrete Aggregate in Construction Part II
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
官方认证美国密歇根州立大学毕业证学位证书原版一模一样
原版一模一样【微信：741003700 】【美国密歇根州立大学毕业证学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Recently uploaded (20)
Embedded machine learning-based road conditions and driving behavior monitoring
Embedded machine learning-based road conditions and driving behavior monitoring
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Manufacturing Process of molasses based distillery ppt.pptx
Manufacturing Process of molasses based distillery ppt.pptx
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
New techniques for characterising damage in rock slopes.pdf
New techniques for characterising damage in rock slopes.pdf
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
A review on techniques and modelling methodologies used for checking electrom...
A review on techniques and modelling methodologies used for checking electrom...
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Recycled Concrete Aggregate in Construction Part III
Recycled Concrete Aggregate in Construction Part III
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
Recycled Concrete Aggregate in Construction Part II
Recycled Concrete Aggregate in Construction Part II
Fire alarm system
- 1. Fire Alarm system Group Members: PROJECT GUIDE: Abhay Gupta PROF. REENA KOTHARI Aniket Gupta Pawan Vishwakarma
- 2. INTRODUCTION • Nowadays, fire is the major cause of death in residents due to lack of automation and emergency alert systems. The main source of fire in residents is due to burning of materials, flammable gases, electric circuits, etc. There is no such low cost fire alert systems or automation available at the homes to provide emergency alerts to the people. • Fire Alarm Systems are very common in commercial building and factories, these devices usual contain a cluster of sensors that constantly monitors for any flame, gas or fire in the building and triggers an alarm if it detects any of these.
- 3. LITERATURE SURVEY • A Fire Detection System for SmartHome Based on IoT Data Analytics: In this paper, an Internet of Things based Fire Detection System (FireDS-IoT) is designed to prevent people from fire by providing an alert message in the emergency. The system is designed using MQ-135 (CO2), MQ-2 (smog), MQ-7 (CO) and DHT-11 (temperature) sensors embedded with Arduino to get the fire event information in the surrounding more accurately. • A Wireless Sensor Network for Fire Detection and Alarm System: This paper based on The wireless fire detection and control system is generally composed of a fire detection node, fire alarm node, and fire alarm control panel. The main module to make the entire system communicate wirelessly is the XBee module from Digi International, Inc. One feature of the XBee module that stand out most is the automatic mesh network.
- 4. LITERATURE SURVEY • IOT-Based Fire Alarm System: This paper based on IoT- based fire alarm system that is capable of detecting the presence of fire, communicating with the concerned parties by calling them when a fire is detected, and receiving and responding to SMS requests from the user. As an improvement, the sensing nodes could depend on a rechargeable battery source instead of a power supply.
- 5. PROBLEM STATEMENT We need to design a fire alarm system that all family members can use in single-family residences. It must be able to detect fires at all locations, residents must be able to activate it from convenient locations themselves, and it must alert residents in all portions of the house.
- 6. REQUIREMENTS • Arduino Uno (any Arduino board can be used) • Breadboard • LED • Buzzer • Flame Sensor • Resistor • Jumper wires
- 8. Output Video
- 9. CONCLUSION The conclusion of this project conclude that we can make microcontroller base fire alarm which works according to the fire break down in the industrial section. The above circuit can be made academically by taking care in hardware and software design.
- 10. References [1] M. Shu-guang, "Construction of Wireless Fire Alarm System Based on ZigBee Technology," Engineering Procedia, vol. 1, no. 1, p. 6, 2011. [2] Dae-Man Han and Jae-Hyun Lim. Design and implementation of smart home energy management systems based on zigbee. IEEE Transactions on Consumer Electronics, 56(3), 2010. [3] John A Stankovic. Research directions for the internet of things. IEEE Internet of Things Journal, 1(1):3–9, 2014.
- 11. THANK YOU