The article discusses international issues. It mentions that globalization has increased economic interdependence between nations while also raising tensions over immigration and trade. Solutions will require cooperation and compromise between countries to balance economic and security concerns in a fair manner.
The most well known reasons for building fires were from warming, electrical appropriation, and lighting frameworks. Chimneys utilized during the special seasons and colder months can make risks also. An alarm framework incorporates numerous segments and highlights to help keep you secured. It spares lives by notice building inhabitants of crises so they can escape risk. In case of a fire, they give discovery and warning without you busy. They can likewise consequently dispatch the local group of fire fighters to your area. At the point when an alarm is actuated, it supports your security and wellbeing during a hazardous occasion. A fire location framework utilizes a smoke alarm to distinguish a fire before it really begins. The point of the framework planned is to caution the removed land owner with proficiency and rapidly by causing short message SMS by means of GSM network. Sreejith S P | Kuldeep Baban Vayadande "Advanced Fire Monitoring System" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-1 , December 2020, URL: https://www.ijtsrd.com/papers/ijtsrd37978.pdf Paper URL : https://www.ijtsrd.com/computer-science/artificial-intelligence/37978/advanced-fire-monitoring-system/sreejith-s-p
The most well known reasons for building fires were from warming, electrical appropriation, and lighting frameworks. Chimneys utilized during the special seasons and colder months can make risks also. An alarm framework incorporates numerous segments and highlights to help keep you secured. It spares lives by notice building inhabitants of crises so they can escape risk. In case of a fire, they give discovery and warning without you busy. They can likewise consequently dispatch the local group of fire fighters to your area. At the point when an alarm is actuated, it supports your security and wellbeing during a hazardous occasion. A fire location framework utilizes a smoke alarm to distinguish a fire before it really begins. The point of the framework planned is to caution the removed land owner with proficiency and rapidly by causing short message SMS by means of GSM network. Sreejith S P | Kuldeep Baban Vayadande "Advanced Fire Monitoring System" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-1 , December 2020, URL: https://www.ijtsrd.com/papers/ijtsrd37978.pdf Paper URL : https://www.ijtsrd.com/computer-science/artificial-intelligence/37978/advanced-fire-monitoring-system/sreejith-s-p
IoT Based Automatic Gas, Smoke and Fire Alert Systemijtsrd
The goal of this system is to build an IoT based automatic gas, smoke and fire alert system via Node MCU. We use a Node MCU, sensors, a microcontroller system, and a few more electronic devices in the current endeavor. This endeavor has easy to use gas, smoke and fire detection. When people are outside of industries, residences, or marketplaces, they are not automatically informed about sudden events caused by fire, gas, or smoke. Not even fire departments receive the information instantly. People suffer greatly as a result, and most of the time, fire nearly destroys residences, companies, and marketplaces. However, our system may be able to help by automatically alerting concerned people to the presence of smoke, gas and fire. As a result, people will be able to arrive at the location swiftly and act promptly. For the system to obtain the data from the fire, gas and smoke sensors, a microcontroller needs to be installed to control every device involved in this work. Wi Fi shield functions a way to connect devices with the network. This system uses an Android app to retrieve the sensors data. This experiment analyses the rooms performance in various fire, gas, and smoke conditions as well as burning objects. The researchers found that when smoke concentrations rise above 100 parts per million, people may get fatal heart attacks, coughing fits, and stinging eyes. However, when the smoke content hits 40 parts per million, our system will automatically send out an alert message. With the help of our technology, we hope that individuals will be able to save their lives and property. Md. Abdur Rahim | Md. Sanjidur Rahman | Rafat Ara "IoT Based Automatic Gas, Smoke and Fire Alert System" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd63446.pdf Paper Url: https://www.ijtsrd.com/other-scientific-research-area/other/63446/iot-based-automatic-gas-smoke-and-fire-alert-system/md-abdur-rahim
Safety is a crucial consideration in design of residential and commercial buildings in order to
safeguard against loss of life and damage to property. Fire is a key element in safety
considerations.
This project therefore seeks to design a arduino based smoke detector fan that will continuously
monitor the presence of significant amount of smoke and activate a fan to draw out a smoke to
contain the situation.
Telecommunication is a very important part of its life. This technology is used in a very sophisticated area like safety and security purpose. Using the GSM technology, telecommunication is conducive to save its life as well as households from fire accidents which have shown in this paper. In this paper, the overall circuit is constructed with six sections. The first section is power supply. The second section is temperature sensor and smoke sensor. The third section is Arduino. The fourth section is LCD display. The fifth section is fan, buzzer and water pump. The sixth section is GSM module. Temperature sensor is connected to the digital input pin of the Arduino and smoke sensor is connected to the analog input pin of the Arduino. When the temperature sensor detects heat and the smoke detector detects smoke the detectable measurement of smoke can be configured regarding the size and surroundings of the room , there is a LCD display which shows temperature and smoke data. When the temperature reach above 40°C and the smoke sensor had reached over 200ppm, the buzzer is ON, spray automatically water and send SMS. Khin Thandar Tun | Aye Sandar Aung | May Lwin Thant "GSM Based Fire Security System" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019, URL: https://www.ijtsrd.com/papers/ijtsrd26697.pdf Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/26697/gsm-based-fire-security-system/khin-thandar-tun
In our every day’s life, safety and time is a major
issue. LPG is highly flammable and if not used carefully they
can be dangerous and can be sufficient to cause death. Even
fire accidents occur due to leakage of gas. LPG is an
odourless gas, as a result leakage detection of this gas cannot
be detected by a person via smell
Intelligent fire detection and alert system using labVIEWIJECEIAES
Fire detection systems are designed to discover fires and allow the safe evacuation of occupants as well as protecting the safety of emergency response personnel. This paper describes the design and development of a fire detection and alert system. Temperature and flame sensors are used to indicate the occurrence of fire. This work consists of two parts, which are transmitter and receiver, both using ZigBee wireless technology. Arduino Uno is used as the microcontroller at the transmitter part to control the sensor nodes and give alert when over temperature and flame are detected. At the transmitter, the collected data from the sensors are transmitted by an XBee module operated as router node. At the receiver side, an XBee coordinator module which is attached to a computer using USB to serial communication captured the data for further processing. In addition, an interactive and user-friendly Graphical User Interface (GUI) is developed. LabVIEW software is used to design the GUI which displays and analyze the possibility of fire happening. The system can display the fire location and provides early warning to allow occupants to escape the building safely.
IoT Based Automatic Gas, Smoke and Fire Alert Systemijtsrd
The goal of this system is to build an IoT based automatic gas, smoke and fire alert system via Node MCU. We use a Node MCU, sensors, a microcontroller system, and a few more electronic devices in the current endeavor. This endeavor has easy to use gas, smoke and fire detection. When people are outside of industries, residences, or marketplaces, they are not automatically informed about sudden events caused by fire, gas, or smoke. Not even fire departments receive the information instantly. People suffer greatly as a result, and most of the time, fire nearly destroys residences, companies, and marketplaces. However, our system may be able to help by automatically alerting concerned people to the presence of smoke, gas and fire. As a result, people will be able to arrive at the location swiftly and act promptly. For the system to obtain the data from the fire, gas and smoke sensors, a microcontroller needs to be installed to control every device involved in this work. Wi Fi shield functions a way to connect devices with the network. This system uses an Android app to retrieve the sensors data. This experiment analyses the rooms performance in various fire, gas, and smoke conditions as well as burning objects. The researchers found that when smoke concentrations rise above 100 parts per million, people may get fatal heart attacks, coughing fits, and stinging eyes. However, when the smoke content hits 40 parts per million, our system will automatically send out an alert message. With the help of our technology, we hope that individuals will be able to save their lives and property. Md. Abdur Rahim | Md. Sanjidur Rahman | Rafat Ara "IoT Based Automatic Gas, Smoke and Fire Alert System" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd63446.pdf Paper Url: https://www.ijtsrd.com/other-scientific-research-area/other/63446/iot-based-automatic-gas-smoke-and-fire-alert-system/md-abdur-rahim
Safety is a crucial consideration in design of residential and commercial buildings in order to
safeguard against loss of life and damage to property. Fire is a key element in safety
considerations.
This project therefore seeks to design a arduino based smoke detector fan that will continuously
monitor the presence of significant amount of smoke and activate a fan to draw out a smoke to
contain the situation.
Telecommunication is a very important part of its life. This technology is used in a very sophisticated area like safety and security purpose. Using the GSM technology, telecommunication is conducive to save its life as well as households from fire accidents which have shown in this paper. In this paper, the overall circuit is constructed with six sections. The first section is power supply. The second section is temperature sensor and smoke sensor. The third section is Arduino. The fourth section is LCD display. The fifth section is fan, buzzer and water pump. The sixth section is GSM module. Temperature sensor is connected to the digital input pin of the Arduino and smoke sensor is connected to the analog input pin of the Arduino. When the temperature sensor detects heat and the smoke detector detects smoke the detectable measurement of smoke can be configured regarding the size and surroundings of the room , there is a LCD display which shows temperature and smoke data. When the temperature reach above 40°C and the smoke sensor had reached over 200ppm, the buzzer is ON, spray automatically water and send SMS. Khin Thandar Tun | Aye Sandar Aung | May Lwin Thant "GSM Based Fire Security System" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019, URL: https://www.ijtsrd.com/papers/ijtsrd26697.pdf Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/26697/gsm-based-fire-security-system/khin-thandar-tun
In our every day’s life, safety and time is a major
issue. LPG is highly flammable and if not used carefully they
can be dangerous and can be sufficient to cause death. Even
fire accidents occur due to leakage of gas. LPG is an
odourless gas, as a result leakage detection of this gas cannot
be detected by a person via smell
Intelligent fire detection and alert system using labVIEWIJECEIAES
Fire detection systems are designed to discover fires and allow the safe evacuation of occupants as well as protecting the safety of emergency response personnel. This paper describes the design and development of a fire detection and alert system. Temperature and flame sensors are used to indicate the occurrence of fire. This work consists of two parts, which are transmitter and receiver, both using ZigBee wireless technology. Arduino Uno is used as the microcontroller at the transmitter part to control the sensor nodes and give alert when over temperature and flame are detected. At the transmitter, the collected data from the sensors are transmitted by an XBee module operated as router node. At the receiver side, an XBee coordinator module which is attached to a computer using USB to serial communication captured the data for further processing. In addition, an interactive and user-friendly Graphical User Interface (GUI) is developed. LabVIEW software is used to design the GUI which displays and analyze the possibility of fire happening. The system can display the fire location and provides early warning to allow occupants to escape the building safely.
Quality defects in TMT Bars, Possible causes and Potential Solutions.PrashantGoswami42
Maintaining high-quality standards in the production of TMT bars is crucial for ensuring structural integrity in construction. Addressing common defects through careful monitoring, standardized processes, and advanced technology can significantly improve the quality of TMT bars. Continuous training and adherence to quality control measures will also play a pivotal role in minimizing these defects.
Vaccine management system project report documentation..pdfKamal Acharya
The Division of Vaccine and Immunization is facing increasing difficulty monitoring vaccines and other commodities distribution once they have been distributed from the national stores. With the introduction of new vaccines, more challenges have been anticipated with this additions posing serious threat to the already over strained vaccine supply chain system in Kenya.
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
CFD Simulation of By-pass Flow in a HRSG module by R&R Consult.pptxR&R Consult
CFD analysis is incredibly effective at solving mysteries and improving the performance of complex systems!
Here's a great example: At a large natural gas-fired power plant, where they use waste heat to generate steam and energy, they were puzzled that their boiler wasn't producing as much steam as expected.
R&R and Tetra Engineering Group Inc. were asked to solve the issue with reduced steam production.
An inspection had shown that a significant amount of hot flue gas was bypassing the boiler tubes, where the heat was supposed to be transferred.
R&R Consult conducted a CFD analysis, which revealed that 6.3% of the flue gas was bypassing the boiler tubes without transferring heat. The analysis also showed that the flue gas was instead being directed along the sides of the boiler and between the modules that were supposed to capture the heat. This was the cause of the reduced performance.
Based on our results, Tetra Engineering installed covering plates to reduce the bypass flow. This improved the boiler's performance and increased electricity production.
It is always satisfying when we can help solve complex challenges like this. Do your systems also need a check-up or optimization? Give us a call!
Work done in cooperation with James Malloy and David Moelling from Tetra Engineering.
More examples of our work https://www.r-r-consult.dk/en/cases-en/
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...Dr.Costas Sachpazis
Terzaghi's soil bearing capacity theory, developed by Karl Terzaghi, is a fundamental principle in geotechnical engineering used to determine the bearing capacity of shallow foundations. This theory provides a method to calculate the ultimate bearing capacity of soil, which is the maximum load per unit area that the soil can support without undergoing shear failure. The Calculation HTML Code included.
Saudi Arabia stands as a titan in the global energy landscape, renowned for its abundant oil and gas resources. It's the largest exporter of petroleum and holds some of the world's most significant reserves. Let's delve into the top 10 oil and gas projects shaping Saudi Arabia's energy future in 2024.
Hybrid optimization of pumped hydro system and solar- Engr. Abdul-Azeez.pdffxintegritypublishin
Advancements in technology unveil a myriad of electrical and electronic breakthroughs geared towards efficiently harnessing limited resources to meet human energy demands. The optimization of hybrid solar PV panels and pumped hydro energy supply systems plays a pivotal role in utilizing natural resources effectively. This initiative not only benefits humanity but also fosters environmental sustainability. The study investigated the design optimization of these hybrid systems, focusing on understanding solar radiation patterns, identifying geographical influences on solar radiation, formulating a mathematical model for system optimization, and determining the optimal configuration of PV panels and pumped hydro storage. Through a comparative analysis approach and eight weeks of data collection, the study addressed key research questions related to solar radiation patterns and optimal system design. The findings highlighted regions with heightened solar radiation levels, showcasing substantial potential for power generation and emphasizing the system's efficiency. Optimizing system design significantly boosted power generation, promoted renewable energy utilization, and enhanced energy storage capacity. The study underscored the benefits of optimizing hybrid solar PV panels and pumped hydro energy supply systems for sustainable energy usage. Optimizing the design of solar PV panels and pumped hydro energy supply systems as examined across diverse climatic conditions in a developing country, not only enhances power generation but also improves the integration of renewable energy sources and boosts energy storage capacities, particularly beneficial for less economically prosperous regions. Additionally, the study provides valuable insights for advancing energy research in economically viable areas. Recommendations included conducting site-specific assessments, utilizing advanced modeling tools, implementing regular maintenance protocols, and enhancing communication among system components.
Cosmetic shop management system project report.pdfKamal Acharya
Buying new cosmetic products is difficult. It can even be scary for those who have sensitive skin and are prone to skin trouble. The information needed to alleviate this problem is on the back of each product, but it's thought to interpret those ingredient lists unless you have a background in chemistry.
Instead of buying and hoping for the best, we can use data science to help us predict which products may be good fits for us. It includes various function programs to do the above mentioned tasks.
Data file handling has been effectively used in the program.
The automated cosmetic shop management system should deal with the automation of general workflow and administration process of the shop. The main processes of the system focus on customer's request where the system is able to search the most appropriate products and deliver it to the customers. It should help the employees to quickly identify the list of cosmetic product that have reached the minimum quantity and also keep a track of expired date for each cosmetic product. It should help the employees to find the rack number in which the product is placed.It is also Faster and more efficient way.
Immunizing Image Classifiers Against Localized Adversary Attacksgerogepatton
This paper addresses the vulnerability of deep learning models, particularly convolutional neural networks
(CNN)s, to adversarial attacks and presents a proactive training technique designed to counter them. We
introduce a novel volumization algorithm, which transforms 2D images into 3D volumetric representations.
When combined with 3D convolution and deep curriculum learning optimization (CLO), itsignificantly improves
the immunity of models against localized universal attacks by up to 40%. We evaluate our proposed approach
using contemporary CNN architectures and the modified Canadian Institute for Advanced Research (CIFAR-10
and CIFAR-100) and ImageNet Large Scale Visual Recognition Challenge (ILSVRC12) datasets, showcasing
accuracy improvements over previous techniques. The results indicate that the combination of the volumetric
input and curriculum learning holds significant promise for mitigating adversarial attacks without necessitating
adversary training.
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...Amil Baba Dawood bangali
Contact with Dawood Bhai Just call on +92322-6382012 and we'll help you. We'll solve all your problems within 12 to 24 hours and with 101% guarantee and with astrology systematic. If you want to take any personal or professional advice then also you can call us on +92322-6382012 , ONLINE LOVE PROBLEM & Other all types of Daily Life Problem's.Then CALL or WHATSAPP us on +92322-6382012 and Get all these problems solutions here by Amil Baba DAWOOD BANGALI
#vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore#blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #blackmagicforlove #blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #Amilbabainuk #amilbabainspain #amilbabaindubai #Amilbabainnorway #amilbabainkrachi #amilbabainlahore #amilbabaingujranwalan #amilbabainislamabad
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)MdTanvirMahtab2
This presentation is about the working procedure of Shahjalal Fertilizer Company Limited (SFCL). A Govt. owned Company of Bangladesh Chemical Industries Corporation under Ministry of Industries.