The document outlines two carbon capture, usage, and storage projects in Abu Dhabi: the Emirates Steel Industry CCUS Project and the ADNOC Rumaitha/Bab CO2 Project. It discusses the drivers for CCUS in Abu Dhabi including meeting strategic gas demand, environmental commitments, leadership in CCUS, and commitment to clean energy. It provides an overview of the technical aspects of the two projects including CO2 capture at Emirates Steel, compression, transportation via pipeline, and injection at Rumaitha for enhanced oil recovery. Execution involves Masdar and ADNOC working on the different components, and there is potential for future CCUS projects linked to ADNOC's CO2 demand.
Barry Jones, General Manager - Asia Pacific for the Global CCS Institute, provides an overview of carbon capture and storage technology including its rationale and a summary of current projects. The presentation also examines impediments to its deployment and recommendations for how to overcome them.
The Asia CCUS Network has been successfully launched on 22-23 June 2021 with initially 13 countries (all ASEAN member countries, the United States, Australia, and Japan) and more than 100 international organisations, companies, financial and research institutions that share the vision of CCUS development throughout the Asian region.
The Network members have expressed their intention to participate to share the vision of the Asia CCUS Network that aims to contribute to the decarbonisation of emissions in Asia through collaboration and cooperation on development and deployment of CCUS.
The Asia CCUS Network provides opportunities for countries in the region to work and collaborate on the low emission technology partnership that will eventually help to build countries’ capability to lower the cost of CCUS technology and its deployment through the collaboration of research and innovation.
At the 2nd Asia CCUS Network (ACN) Knowledge Sharing Conference, the Asia CCUS Network is very pleased to invite experts from the Department of Energy, United States of America (USDOE) to share their insights and experiences about CCUS development and policy to support the deployment of CCUS technology.
The ACN will be an active forum to bridge the knowledge gap on CCUS technologies, policy development to support the development and deployment of CCUS in Asia. Thus, this conference hosted in collaboration with IEA will help to bring in update knowledge, opportunity for investment in CCUS in Asia.
Methanation catalysts are almost always manufactured and transported in the oxidized form, and therefore they must be reduced in the reactor to give nickel metal in order to make them active. The reduction is usually carried out in process gas and occurs by the two reactions:
Barry Jones, General Manager - Asia Pacific for the Global CCS Institute, provides an overview of carbon capture and storage technology including its rationale and a summary of current projects. The presentation also examines impediments to its deployment and recommendations for how to overcome them.
The Asia CCUS Network has been successfully launched on 22-23 June 2021 with initially 13 countries (all ASEAN member countries, the United States, Australia, and Japan) and more than 100 international organisations, companies, financial and research institutions that share the vision of CCUS development throughout the Asian region.
The Network members have expressed their intention to participate to share the vision of the Asia CCUS Network that aims to contribute to the decarbonisation of emissions in Asia through collaboration and cooperation on development and deployment of CCUS.
The Asia CCUS Network provides opportunities for countries in the region to work and collaborate on the low emission technology partnership that will eventually help to build countries’ capability to lower the cost of CCUS technology and its deployment through the collaboration of research and innovation.
At the 2nd Asia CCUS Network (ACN) Knowledge Sharing Conference, the Asia CCUS Network is very pleased to invite experts from the Department of Energy, United States of America (USDOE) to share their insights and experiences about CCUS development and policy to support the deployment of CCUS technology.
The ACN will be an active forum to bridge the knowledge gap on CCUS technologies, policy development to support the development and deployment of CCUS in Asia. Thus, this conference hosted in collaboration with IEA will help to bring in update knowledge, opportunity for investment in CCUS in Asia.
Methanation catalysts are almost always manufactured and transported in the oxidized form, and therefore they must be reduced in the reactor to give nickel metal in order to make them active. The reduction is usually carried out in process gas and occurs by the two reactions:
Webinar Series: Carbon Sequestration Leadership Forum Part 1. CCUS in the Uni...Global CCS Institute
The Carbon Sequestration Leadership Forum (CSLF) is a Ministerial-level international climate change initiative that is focused on the development of improved cost-effective technologies for carbon capture and storage (CCS). As part of our commitment to raising awareness of CCS policies and technology, CSLF, with support from the Global CCS Institute, is running a series of webinars showcasing academics and researchers that are working on some of the most interesting CCS projects and developments from around the globe.
This first webinar comes to you from Abu Dhabi – the site of the Mid-Year CSLF Meeting and home of the Al Reyadah Carbon Capture, Utilization & Storage (CCUS) Project. The United Arab Emirates (UAE) is one of the world’s major oil exporters, with some of the highest levels of CO2 emissions per capita. These factors alone make this a very interesting region for the deployment of CCUS both as an option for reducing CO2 emissions, but also linking these operations for the purposes of enhanced oil recovery (EOR) operations.
In the UAE, CCUS has attracted leading academic institutes and technology developers to work on developing advanced technologies for reducing CO2 emissions. On Wednesday, 26th April, we had the opportunity to join the Masdar Institute’s Associate Professor of Chemical Engineering, Mohammad Abu Zahra to learn about the current status and potential for CCUS in the UAE.
Mohammad presented an overview of the current large scale CCUS demonstration project in the UAE, followed by a presentation and discussion of the ongoing research and development activities at the Masdar Institute.
This webinar offered a rare opportunity to put your questions directly to this experienced researcher and learn more about the fascinating advances being made at the Masdar Institute.
A full package presentation about Hydrogen Production Unit including an overview about steam reformers, combustion reaction, moods of heat transfer, draft systems, reactors, chemicals used in HPU, and types of compressors. Moreover, it describes the process description, process variables, and opens the way for some possible improvements which can be implemented to develop the unit performance.
The role of CCS/CCUS in the Climate Action Plan - Dr S. Julio FriedmannGlobal CCS Institute
The role of CCS/CCUS in the Climate Action Plan
Global CCS Institute, delivered at the Global CCS Institute's Third Americas Forum
Feb. 27th, 2014, Washington, DC
Introduction and Theoretical Aspects
Catalyst Reduction and Start-up
Normal Operation and Troubleshooting
Shutdown and Catalyst Discharge
Nickel Carbonyl Hazard
Modern Methanation Catalyst Requirements
CCUS in the USA: Activity, Prospects, and Academic Research - plenary presentation given by Alissa Park at the UKCCSRC Cardiff Biannual Meeting, 10-11 September 2014
Webinar Series: Carbon Sequestration Leadership Forum Part 1. CCUS in the Uni...Global CCS Institute
The Carbon Sequestration Leadership Forum (CSLF) is a Ministerial-level international climate change initiative that is focused on the development of improved cost-effective technologies for carbon capture and storage (CCS). As part of our commitment to raising awareness of CCS policies and technology, CSLF, with support from the Global CCS Institute, is running a series of webinars showcasing academics and researchers that are working on some of the most interesting CCS projects and developments from around the globe.
This first webinar comes to you from Abu Dhabi – the site of the Mid-Year CSLF Meeting and home of the Al Reyadah Carbon Capture, Utilization & Storage (CCUS) Project. The United Arab Emirates (UAE) is one of the world’s major oil exporters, with some of the highest levels of CO2 emissions per capita. These factors alone make this a very interesting region for the deployment of CCUS both as an option for reducing CO2 emissions, but also linking these operations for the purposes of enhanced oil recovery (EOR) operations.
In the UAE, CCUS has attracted leading academic institutes and technology developers to work on developing advanced technologies for reducing CO2 emissions. On Wednesday, 26th April, we had the opportunity to join the Masdar Institute’s Associate Professor of Chemical Engineering, Mohammad Abu Zahra to learn about the current status and potential for CCUS in the UAE.
Mohammad presented an overview of the current large scale CCUS demonstration project in the UAE, followed by a presentation and discussion of the ongoing research and development activities at the Masdar Institute.
This webinar offered a rare opportunity to put your questions directly to this experienced researcher and learn more about the fascinating advances being made at the Masdar Institute.
A full package presentation about Hydrogen Production Unit including an overview about steam reformers, combustion reaction, moods of heat transfer, draft systems, reactors, chemicals used in HPU, and types of compressors. Moreover, it describes the process description, process variables, and opens the way for some possible improvements which can be implemented to develop the unit performance.
The role of CCS/CCUS in the Climate Action Plan - Dr S. Julio FriedmannGlobal CCS Institute
The role of CCS/CCUS in the Climate Action Plan
Global CCS Institute, delivered at the Global CCS Institute's Third Americas Forum
Feb. 27th, 2014, Washington, DC
Introduction and Theoretical Aspects
Catalyst Reduction and Start-up
Normal Operation and Troubleshooting
Shutdown and Catalyst Discharge
Nickel Carbonyl Hazard
Modern Methanation Catalyst Requirements
CCUS in the USA: Activity, Prospects, and Academic Research - plenary presentation given by Alissa Park at the UKCCSRC Cardiff Biannual Meeting, 10-11 September 2014
'Applying carbon capture and storage to a Chinese steel plant.' Feasibility s...Global CCS Institute
The Global CCS Institute has recently published a feasibility study report on applying carbon capture and storage (CCS) to a steel plant in China. Toshiba was commissioned to conduct the study in collaboration with Chinese corporations.
The feasibility suggests that carbon capture in Chinese steel plants is a cost effective means of reducing carbon emissions compared with similar plants around the world. In this webinar, Toshiba presented on the major findings of this feasibility study.
Webinar: How to manage technical risk in CO2 capture technology developmentGlobal CCS Institute
Scaling up, integrating and optimising CO2 capture plants can be associated with high risks and costs. Currently, there is a lack of standard codes and procedures to be used, making the development of CCS projects challenging. In this webinar, DNV GL presented the recommended qualification procedure for scaling-up CO2 capture technologies, from the lab to commercial scale.
The technical risks associated with new CO2 capture technologies can be managed through a systematic qualification process. This process focuses on the identification of the risks and indicates how they can be evaluated and reduced with adequate qualification methods, such as analyses and testing. Aker Solutions illustrated how this procedure has been applied for scaling up their proprietary CO2 capture technology.
This webinar was presented by Anastasia Isaenko, Consultant, Carbon Capture and Storage from DNV GL and Oscar Graff, Chief Technology Officer, Department of Clean Carbon from Aker Solutions.
The green benefits of cement and concrete are hidden due to the vast quantities consumed around the globe. Therefore, despite the low carbon footprint, cement and concrete are often given low marks for sustainability. The presentation attempts to set the record straight.
The opportunities for reducing CO2 emissions in the iron and steel industry - plenary presentation given by Dianne Wiley at the UKCCSRC Cardiff Biannual Meeting, 10-11 September 2014
Update on CCS Activities in Canada and Possible Topics for European Collaboration, Kathryn Gagnon (Policy Advisor, Natural Resources Canada) UK/Norway/Canada Meeting 18/19 March 2015
Benefits and Challenges of Implementing Carbon Capture and Sequestration Tech...theijes
This paper reviews the state of carbon dioxide (CO2) emissions, the potential benefits and challenges of
implementing Carbon Capture and Sequestration (CCS) technology in Nigeria as a means of mitigating the
threat posed in emitting CO2. In 2010 Nigeria was ranked 44th by the International Energy Agency (IEA) for
emitting about 80.51 million metric tons of CO2 annually. In this paper, the three different stages that constitute
carbon capture and sequestration are discussed individually, and then the potential for their integration into a
commercial scale CCS process is considered. CCS technology shows promising possibility for application in
plants that emit large amounts of CO2 and also considered are some technological improvements to capture
CO2 from air, as the technology can be applied for removing CO2 directly from the atmosphere and thus
reducing the effect of emissions from vehicles and other moving sources. The development and deployment of
CCS in Nigeria will be very significant in ensuring that we are able to meet increasing energy demand and keep
the lights on whilst minimizing the environmental damage. The market for CCS in Nigeria is likely to be
measured in $billions with the potential of creating over 100,000 jobs.
Power Gen ME presentation Harnessing Waste EnergyAnita Nouri
All landfills need to be degassed. Al Qusais landfill has developed from a dump site to a well managed landfill that is being becoming a source of pride rather than worry for Dubai and a showcase for the region. Working together towards a cleaner future. It is our responsibility to leave the Earth a better place for our children.
Similar to Emirates Steel Industry Carbon Capture Usage & Storage Project and ADNOC Rumaitha / Bab CO2 Project (20)
Northern Lights: A European CO2 transport and storage project Global CCS Institute
The Global CCS Institute hosted the final webinar of its "Telling the Norwegian CCS Story" series which presented Northern Lights. This project is part of the Norwegian full-scale CCS project which will include the capture of CO2 at two industrial facilities (cement and waste-to-energy plants), transport and permanent storage of CO2 in a geological reservoir on the Norwegian Continental Shelf.
Northern Lights aims to establish an open access CO2 transport and storage service for Europe. It is the first integrated commercial project of its kind able to receive CO2 from a variety of industrial sources. The project is led by Equinor with two partners Shell and Total. Northern Lights aims to drive the development of CCS in Europe and globally.
Webinar: Policy priorities to incentivise large scale deployment of CCSGlobal CCS Institute
The Global CCS Institute released a new report highlighting strategic policy priorities for the large-scale deployment of carbon capture and storage (CCS). The Institute’s report also reviews the progress achieved until now with existing policies and the reasons behind positive investment decisions for the current 23 large-scale CCS projects in operation and construction globally.
Telling the Norwegian CCS Story | PART II: CCS: the path to a sustainable and...Global CCS Institute
The Global CCS Institute in collaboration with Gassnova hosted the second webinar of its "Telling the Norwegian CCS Story" series.
The second webinar presented Norcem's CCS project at their cement production facility in Brevik, in the South-Eastern part of Norway.
Telling the Norwegian CCS Story | PART I: CCS: the path to sustainable and em...Global CCS Institute
In 2018, the Norwegian government announced its decision to continue the planning of a demonstration project for CO2 capture, transport and storage. This webinar focuses on the Fortum Oslo Varme CCS project. This is one of the two industrial CO2 sources in the Norwegian full-scale project.
At their waste-to-energy plant at Klemetsrud in Oslo, Fortum Oslo Varme produces electricity and district heating for the Oslo region by incinerating waste. Its waste-to-energy plant is one of the largest land-based sources of CO2 emissions in Norway, counting for about 20 % of the city of Oslo’s total emissions. The CCS project in Oslo is an important step towards a sustainable waste system and the creation of a circular economy. It will be the first energy recovery installation for waste disposal treatment with full-scale CCS.
Fortum Oslo Varme has understood the enormous potential for the development of a CCS industry in the waste-to-energy industry. The company is working to capture 90 % of its CO2 emissions, the equivalent of 400 000 tons of CO2 per year. This project will open new opportunities to reduce emissions from the waste sector in Norway and globally. Carbon capture from waste incineration can remove over 90 million tons of CO2 per year from existing plants in Europe. There is high global transfer value and high interest in the industry for the project in Oslo.
The waste treated consists of almost 60 % biological carbon. Carbon capture at waste-to-energy plants will therefore be so-called BIO-CCS (i.e. CCS from the incineration of organic waste, thereby removing the CO2 from the natural cycle).
Find out more about the project by listening to our webinar.
Decarbonizing Industry Using Carbon Capture: Norway Full Chain CCSGlobal CCS Institute
Industrial sectors such as steel, cement, iron, and chemicals production are responsible for over 20 percent of global carbon dioxide (CO2) emissions. To be on track to meet greenhouse gas emissions reduction targets established as part of the Paris Climate Accord, all sectors must find solutions to rapidly decarbonize, and carbon capture and storage (CCS) technology is the only path for energy-intensive industries.
This webinar will explore how one country, Norway, is working to realize a large-scale Full Chain CCS project, where it is planning to apply carbon capture technology to several industrial facilities. This unique project explores capturing CO2 from three different industrial facilities - an ammonia production plant, a waste-to-energy plant, and a cement production facility. Captured CO2 will be then transported by ship to a permanent off-shore storage site operated as part of a collaboration between Statoil, Total, and Shell. When operational, Norway Full Chain CCS will capture and permanently store up to 1.5 million tons of CO2 per year.
During this webinar, Michael Carpenter, Senior Adviser at Gassnova, will provide an overview of the Norway Full Chain CCS, and discuss the value that Norway aims to derive from it. The key stakeholders working on this exciting project, and how they cooperate, will be also discussed. Gassnova is a Norwegian state enterprise focusing on CCS technology, which manages the Norway Full Chain CCS project.
Cutting Cost of CO2 Capture in Process Industry (CO2stCap) Project overview &...Global CCS Institute
The CO2StCap project is a four year initiative carried out by industry and academic partners with the aim of reducing capture costs from CO2 intensive industries (more info here). The project, led by Tel-Tek, is based on the idea that cost reduction is possible by capturing only a share of the CO2emissions from a given facility, instead of striving for maximized capture rates. This can be done in multiple ways, for instance by capturing only from the largest CO2 sources at individual multi-stack sites utilising cheap waste heat or adapting the capture volumes to seasonal changes in operations.
The main focus of this research is to perform techno-economic analyses for multiple partial CO2 capture concepts in order to identify economic optimums between cost and volumes captured. In total for four different case studies are developed for cement, iron & steel, pulp & paper and ferroalloys industries.
The first part of the webinar gave an overview of the project with insights into the cost estimation method used. The second part presented the iron & steel industry case study based on the Lulea site in Sweden, for which waste-heat mapping methodology has been used to assess the potential for partial capture via MEA-absorption. Capture costs for different CO2 sources were compared and discussed, demonstrating the viability of partial capture in an integrated steelworks.
Webinar presenters included Ragnhild Skagestad, senior researcher at Tel-Tek; Maximilian Biermann, PhD student at Division of Energy Technology, Chalmers University of Technology and Maria Sundqvist, research engineer at the department of process integration at Swerea MEFOS.
The Global CCS Institute and USEA co-hosted a briefing on the importance of R&D in advancing energy technologies on June 29 2017. This is the presentation given by Ron Munson, Global Lead-Capture at the Global CCS Institute.
The Global CCS Institute and USEA co-hosted a briefing on the importance of R&D in advancing energy technologies on June 29 2017. This is the presentation given by Alfred “Buz” Brown, Founder, CEO and Chairman of ION Engineering.
The Global CCS Institute and USEA co-hosted a briefing on the importance of R&D in advancing energy technologies on June 29 2017. This is the presentation given by Tim Merkel, Director, Research and Development Group at Membrane Technology & Research (MTR)
Mission Innovation aims to reinvigorate and accelerate global clean energy innovation with the objective to make clean energy widely affordable. Through a series of Innovation Challenges, member countries have pledged to support actions aimed at accelerating research, development, and demonstration (RD&D) in technology areas where MI members believe increased international attention would make a significant impact in our shared fight against climate change. The Innovation Challenges cover the entire spectrum of RD&D; from early stage research needs assessments to technology demonstration projects.
The Carbon Capture Innovation challenge aims to explore early stage research opportunities in the areas of Carbon Capture, Carbon Utilization, and Carbon Storage. The goal of the Carbon Capture Innovation Challenge is twofold: first, to identify and prioritize breakthrough technologies; and second, to recommend research, development, and demonstration (RD&D) pathways and collaboration mechanisms.
During the webinar, Dr Tidjani Niass, Saudi Aramco, and Jordan Kislear, US Department of Energy, provided an overview of progress to date. They also highlighted detail opportunities for business and investor engagement, and discuss future plans for the Innovation Challenge.
Karl Hausker, PhD, Senior Fellow, Climate Program, World Resources Institute, is the leader of the analytic and writing team for the latest study by the Risky Business Project: From Risk to Return: Investing in a Clean Energy Economy. Co-Chairs Michael Bloomberg, Henry Paulson, Jr, and Thomas Steyer tasked the World Resources Institute with this independent assessment of technically and economically feasible pathways that the US could follow to achieve an 80% reduction in CO2 emissions by 2050. These pathways involve mixtures of: energy efficiency, renewable energy, nuclear power, carbon capture and storage, increased carbon sequestration in US lands, and reductions in non-CO2 emissions. These pathways rely on commercial or near-commercial technologies that American companies are adopting and developing.
Dr Hausker presented the results of the study and draw some comparisons to the US Mid Century Strategy report submitted to the UNFCCC. He has worked for 30 years in the fields of climate change, energy, and environment in a career that has spanned legislative and executive branches, research institutions, NGOs, and consulting.
This webinar offered a unique opportunity to learn more about various decarbonization scenarios and to address your questions directly to Dr Hausker.
Energy Security and Prosperity in Australia: A roadmap for carbon capture and...Global CCS Institute
On 15 February, a Roadmap titled for Energy Security and Prosperity in Australia: A roadmap for carbon capture and storage was released. The ACCS Roadmap contains analysis and recommendations for policy makers and industry on much needed efforts to ensure CCS deployment in Australia.
This presentation focused on the critical role CCS can play in Australia’s economic prosperity and energy security. To remain within its carbon budget, Australia must accelerate the deployment of CCS. Couple with this, only CCS can ensure energy security for the power sector and high-emissions industries whilst maintain the the vital role the energy sector plays in the Australian economy.
The webinar also detailed what is required to get Australia ready for widespread commercial deployment of CCS through specific set of phases, known as horizons in strategic areas including storage characterisation, legal and regulatory frameworks and public engagement and awareness.
The Roadmap serves as an important focal point for stakeholders advocating for CCS in Australia, and will provide a platform for further work feeding into the Australian Government’s review of climate policy in 2017 and beyond.
It is authored by the University of Queensland and Gamma Energy Technology, and was overseen by a steering committee comprising the Commonwealth Government, NSW Government, CSIRO, CO2CRC Limited, ACALET - COAL21 Fund and ANLEC R&D.
This webinar was presented by Professor Chris Greig, from The University of Queensland.
Webinar Series: Public engagement, education and outreach for CCS. Part 5: So...Global CCS Institute
The fifth webinar in the public engagement, education and outreach for CCS Series will explore the critically important subject of social site characterisation with the very researchers who named the process.
We were delighted to be able to reunite CCS engagement experts Sarah Wade and Sallie Greenberg, Ph.D. to revisit their 2011 research and guidance: ‘Social Site Characterisation: From Concept to Application’. When published, this research and toolkit helped early CCS projects worldwide to raise the bar on their existing engagement practices. For this webinar, we tasked these early thought leaders with reminding us of the importance of this research and considering the past recommendations in today’s context. Sarah and Sallie tackled the following commonly asked questions:
What exactly is meant by social site characterisation?
Why it is important?
What would they consider best practice for getting to understand the social intricacies and impacts of a CCS project site?
This entire Webinar Series has been designed to share leading research and best practice and consider these learnings as applied to real project examples. So for this fifth Webinar, we were really pleased to be joined by Ruth Klinkhammer, Senior Manager, Communications and Engagement at CMC Research Institutes. Ruth agreed to share some of her experiences and challenges of putting social site characterisation into practice onsite at some of CMC’s larger research projects.
This Webinar combined elements of public engagement research with real world application and discussion, explore important learnings and conclude with links to further resources for those wishing to learn more. This a must for anyone working in or studying carbon capture and storage or other CO2 abatement technologies. If you have ever nodded along at a conference where the importance of understanding stakeholders is acknowledged, but then stopped to wonder – what might that look like in practice? This Webinar is for you.
Managing carbon geological storage and natural resources in sedimentary basinsGlobal CCS Institute
To highlight the research and achievements of Australian researchers, the Global CCS Institute, together with Australian National Low Emissions Coal Research and Development (ANLEC R&D), will hold a series of webinars throughout 2017. Each webinar will highlight a specific ANLEC R&D research project and the relevant report found on the Institute’s website.
This is the eighth webinar of the series and will present on basin resource management and carbon storage. With the ongoing deployment of CCS facilities globally, the pore space - the voids in the rock deep in sedimentary basins – are now a commercial resource. This is a relatively new concept with only a few industries utilising that pore space to date.
This webinar presented a framework for the management of basin resources including carbon storage. Prospective sites for geological storage of carbon dioxide target largely sedimentary basins since these provide the most suitable geological settings for safe, long-term storage of greenhouse gases. Sedimentary basins can host different natural resources that may occur in isolated pockets, across widely dispersed regions, in multiple locations, within a single layer of strata or at various depths.
In Australia, the primary basin resources are groundwater, oil and gas, unconventional gas, coal and geothermal energy. Understanding the nature of how these resources are distributed in the subsurface is fundamental to managing basin resource development and carbon dioxide storage. Natural resources can overlap laterally or with depth and have been developed successfully for decades. Geological storage of carbon dioxide is another basin resource that must be considered in developing a basin-scale resource management system to ensure that multiple uses of the subsurface can sustainably and pragmatically co-exist.
This webinar was presented by Karsten Michael, Research Team Leader, CSIRO Energy.
Mercury and other trace metals in the gas from an oxy-combustion demonstratio...Global CCS Institute
To highlight the research and achievements of Australian researchers, the Global CCS Institute together with ANLEC R&D will hold a series of webinars throughout 2017. Each webinar will highlight a specific ANLEC R&D research project and the relevant report found on the Institute’s website. This is the seventh webinar of the series and presented the results of a test program on the retrofitted Callide A power plant in Central Queensland.
The behaviour of trace metals and the related characteristics of the formation of fine particles may have important implications for process options, gas cleaning, environmental risk and resultant cost in oxy-fuel combustion. Environmental and operational risk will be determined by a range of inter-related factors including:
The concentrations of trace metals in the gas produced from the overall process;
Capture efficiencies of the trace species in the various air pollution control devices used in the process; including gas and particulate control devices, and specialised systems for the removal of specific species such as mercury;
Gas quality required to avoid operational issues such as corrosion, and to enable sequestration in a variety of storage media without creating unacceptable environmental risks; the required quality for CO2 transport will be defined by (future and awaited) regulation but may be at the standards currently required of food or beverage grade CO2; and
Speciation of some trace elements
Macquarie University was engaged by the Australian National Low Emissions Coal Research and Development Ltd (ANLEC R&D) to investigate the behaviour of trace elements during oxy-firing and CO2 capture and processing in a test program on the retrofitted Callide A power plant, with capability for both oxy and air-firing. Gaseous and particulate sampling was undertaken in the process exhaust gas stream after fabric filtration at the stack and at various stages of the CO2 compression and purification process. These measurements have provided detailed information on trace components of oxy-fired combustion gases and comparative measurements under air fired conditions. The field trials were supported by laboratory work where combustion took place in a drop tube furnace and modelling of mercury partitioning using the iPOG model.
The results obtained suggest that oxy-firing does not pose significantly higher environmental or operational risks than conventional air-firing. The levels of trace metals in the “purified” CO2 gas stream should not pose operational issues within the CO2 Processing Unit (CPU).
This webinar was presented by Peter Nelson, Professor of Environmental Studies, and Anthony Morrison, Senior Research Fellow, from the Department of Environmental Sciences, Macquarie University.
Webinar Series: Public engagement, education and outreach for CCS. Part 4: Is...Global CCS Institute
Teesside Collective has been developing a financial support mechanism to kickstart an Industrial Carbon Capture and Storage (CCS) network in the UK. This project would transform the Teesside economy, which could act as a pilot area in the UK as part of the Government’s Industrial Strategy.
The final report– produced by Pöyry Management Consulting in partnership with Teesside Collective – outlines how near-term investment in CCS can be a cost-effective, attractive proposition for both Government and energy-intensive industry.
The report was published on Teesside Collective’s website on 7 February. You will be able to view copies of the report in advance of the webinar.
We were delighted to welcome Sarah Tennison from Tees Valley Combined Authority back onto the webinar programme. Sarah was joined by Phil Hare and Stuart Murray from Pöyry Management Consulting, to take us through the detail of the model and business case for Industrial CCS.
This webinar offered a rare opportunity to speak directly with these project developers and understand more about their proposed financial support mechanism.
Laboratory-scale geochemical and geomechanical testing of near wellbore CO2 i...Global CCS Institute
To highlight the research and achievements of Australian researchers, the Global CCS Institute together with ANLEC R&D will hold a series of webinars throughout 2016 and 2017. Each webinar will highlight a specific ANLEC R&D research project and the relevant report found on the Institute’s website. This is the sixth webinar of the series and presented the results of chemical and mechanical changes that carbon dioxide (CO2) may have at a prospective storage complex in the Surat Basin, Queensland, Australia.
Earth Sciences and Chemical Engineering researchers at the University of Queensland have been investigating the effects of supercritical CO2 injection on reservoir properties in the near wellbore region as a result of geochemical reactions since 2011. The near wellbore area is critical for CO2 injection into deep geological formations as most of the resistance to flow occurs in this region. Any changes to the permeability can have significant economic impact in terms of well utilisation efficiency and compression costs. In the far field, away from the well, the affected reservoir is much larger and changes to permeability through blocking or enhancement have relatively low impact.
This webinar was presented by Prof Sue Golding and Dr Grant Dawson and will provide an overview of the findings of the research to assist understanding of the beneficial effects and commercial consequences of near wellbore injectivity enhancement as a result of geochemical reactions.
Webinar Series: Public engagement, education and outreach for CCS. Part 3: Ca...Global CCS Institute
The third webinar in the public engagement, education and outreach for CCS Series digged deeper, perhaps multiple kilometres deeper, to explore successful methods for engaging the public on the often misunderstood topic of carbon (CO2) storage.
Forget bad experiences of high school geology, we kick-started our 2017 webinar program with three ‘rock stars’ of CO2 storage communication – Dr Linda Stalker, Science Director of Australia’s National Geosequestration Laboratory, Lori Gauvreau, Communication and Engagement Specialist for Schlumberger Carbon Services, and Norm Sacuta, Communication Manager at the Petroleum Technology Research Centre who all joined Kirsty Anderson, the Institute’s Senior Advisor on Public Engagement, to discuss the challenges of communicating about CO2 storage. They shared tips, tools and some creative solutions for getting people engaged with this topic.
This entire Webinar Series has been designed to hear directly from the experts and project practitioners researching and delivering public engagement, education and outreach best practice for carbon capture and storage. This third webinar was less focused on research and more on the real project problems and best practice solutions. It is a must for anyone interested in science communication/education and keen to access resources and ideas to make their own communications more engaging.
Water use of thermal power plants equipped with CO2 capture systemsGlobal CCS Institute
The potential for increased water use has often been noted as a challenge to the widespread deployment of carbon capture and storage (CCS) to mitigate greenhouse gas emissions. Early studies, that are widely referenced and cited in discussions of CCS, indicated that installation of a capture system would nearly double water consumption for thermal power generation, while more recent studies show different results. The Global CCS Institute has conducted a comprehensive review of data available in order to clarify messages around water consumption associated with installation of a capture system. Changes in water use estimates over time have been evaluated in terms of capture technology, cooling systems, and how the data are reported.
Guido Magneschi, Institute’s Senior Advisor – Carbon Capture, and co-author of the study, presented the results of the review and illustrated the main conclusions.
Global Status of CCS: 2016. Saline Aquifer Storage Performance at the Quest C...Global CCS Institute
The Global CCS Institute launched The Global Status of CCS: 2016 at a dedicated event at the 22nd conference of the parties (COP 22) in Marrakech on Tuesday, 15 November.
The Global Status of CCS: 2016 report is an essential reference for industry, government, research bodies, and the broader community, providing a comprehensive overview of global and regional CCS developments.
Following the report launch, we will run a number of webinars commencing in November 2016, through to early 2017.
A Summary of the Global Status of CCS: 2016 will be accessible on our website from 15 November, and includes updates on key CCS facilities, including two major facilities now in operation:
Shell’s Quest Project in Canada
Tomakomai CCS Demonstration Project in Japan
These projects are significant 2016 milestones and testament to the safety, reliability and cost-effectiveness of CCS as an integral technology to meeting Paris Agreement climate change targets.
Please join us for the first of the Global Status of CCS: 2016 webinar series.
Saline Aquifer Storage Performance at the Quest CCS Project
As one of a handful of large-scale CCS projects currently injecting CO2 into a dedicated saline aquifer storage site, Shell’s Quest project offers a unique case study into the performance of dedicated storage. The Quest project injects CO2 into the Basal Cambrian Sandstone located 2 km below the surface. After the first year of operations, the Quest reservoir has exceeded internal expectations. While the original premise called for eight wells, today only two of three constructed injection wells take 100 per cent of project volumes (~140 tonnes /hr).
In this webinar, Simon O’Brien, Shell Quest Subsurface Manager, discussed storage performance at Quest after one year of operations as well as early results from the measurement, monitoring, and verification (MMV) plan.
Skye Residences | Extended Stay Residences Near Toronto Airportmarketingjdass
Experience unparalleled EXTENDED STAY and comfort at Skye Residences located just minutes from Toronto Airport. Discover sophisticated accommodations tailored for discerning travelers.
Website Link :
https://skyeresidences.com/
https://skyeresidences.com/about-us/
https://skyeresidences.com/gallery/
https://skyeresidences.com/rooms/
https://skyeresidences.com/near-by-attractions/
https://skyeresidences.com/commute/
https://skyeresidences.com/contact/
https://skyeresidences.com/queen-suite-with-sofa-bed/
https://skyeresidences.com/queen-suite-with-sofa-bed-and-balcony/
https://skyeresidences.com/queen-suite-with-sofa-bed-accessible/
https://skyeresidences.com/2-bedroom-deluxe-queen-suite-with-sofa-bed/
https://skyeresidences.com/2-bedroom-deluxe-king-queen-suite-with-sofa-bed/
https://skyeresidences.com/2-bedroom-deluxe-queen-suite-with-sofa-bed-accessible/
#Skye Residences Etobicoke, #Skye Residences Near Toronto Airport, #Skye Residences Toronto, #Skye Hotel Toronto, #Skye Hotel Near Toronto Airport, #Hotel Near Toronto Airport, #Near Toronto Airport Accommodation, #Suites Near Toronto Airport, #Etobicoke Suites Near Airport, #Hotel Near Toronto Pearson International Airport, #Toronto Airport Suite Rentals, #Pearson Airport Hotel Suites
RMD24 | Debunking the non-endemic revenue myth Marvin Vacquier Droop | First ...BBPMedia1
Marvin neemt je in deze presentatie mee in de voordelen van non-endemic advertising op retail media netwerken. Hij brengt ook de uitdagingen in beeld die de markt op dit moment heeft op het gebied van retail media voor niet-leveranciers.
Retail media wordt gezien als het nieuwe advertising-medium en ook mediabureaus richten massaal retail media-afdelingen op. Merken die niet in de betreffende winkel liggen staan ook nog niet in de rij om op de retail media netwerken te adverteren. Marvin belicht de uitdagingen die er zijn om echt aansluiting te vinden op die markt van non-endemic advertising.
Accpac to QuickBooks Conversion Navigating the Transition with Online Account...PaulBryant58
This article provides a comprehensive guide on how to
effectively manage the convert Accpac to QuickBooks , with a particular focus on utilizing online accounting services to streamline the process.
RMD24 | Retail media: hoe zet je dit in als je geen AH of Unilever bent? Heid...BBPMedia1
Grote partijen zijn al een tijdje onderweg met retail media. Ondertussen worden in dit domein ook de kansen zichtbaar voor andere spelers in de markt. Maar met die kansen ontstaan ook vragen: Zelf retail media worden of erop adverteren? In welke fase van de funnel past het en hoe integreer je het in een mediaplan? Wat is nu precies het verschil met marketplaces en Programmatic ads? In dit half uur beslechten we de dilemma's en krijg je antwoorden op wanneer het voor jou tijd is om de volgende stap te zetten.
Business Valuation Principles for EntrepreneursBen Wann
This insightful presentation is designed to equip entrepreneurs with the essential knowledge and tools needed to accurately value their businesses. Understanding business valuation is crucial for making informed decisions, whether you're seeking investment, planning to sell, or simply want to gauge your company's worth.
Improving profitability for small businessBen Wann
In this comprehensive presentation, we will explore strategies and practical tips for enhancing profitability in small businesses. Tailored to meet the unique challenges faced by small enterprises, this session covers various aspects that directly impact the bottom line. Attendees will learn how to optimize operational efficiency, manage expenses, and increase revenue through innovative marketing and customer engagement techniques.
3.0 Project 2_ Developing My Brand Identity Kit.pptxtanyjahb
A personal brand exploration presentation summarizes an individual's unique qualities and goals, covering strengths, values, passions, and target audience. It helps individuals understand what makes them stand out, their desired image, and how they aim to achieve it.
India Orthopedic Devices Market: Unlocking Growth Secrets, Trends and Develop...Kumar Satyam
According to TechSci Research report, “India Orthopedic Devices Market -Industry Size, Share, Trends, Competition Forecast & Opportunities, 2030”, the India Orthopedic Devices Market stood at USD 1,280.54 Million in 2024 and is anticipated to grow with a CAGR of 7.84% in the forecast period, 2026-2030F. The India Orthopedic Devices Market is being driven by several factors. The most prominent ones include an increase in the elderly population, who are more prone to orthopedic conditions such as osteoporosis and arthritis. Moreover, the rise in sports injuries and road accidents are also contributing to the demand for orthopedic devices. Advances in technology and the introduction of innovative implants and prosthetics have further propelled the market growth. Additionally, government initiatives aimed at improving healthcare infrastructure and the increasing prevalence of lifestyle diseases have led to an upward trend in orthopedic surgeries, thereby fueling the market demand for these devices.
As a business owner in Delaware, staying on top of your tax obligations is paramount, especially with the annual deadline for Delaware Franchise Tax looming on March 1. One such obligation is the annual Delaware Franchise Tax, which serves as a crucial requirement for maintaining your company’s legal standing within the state. While the prospect of handling tax matters may seem daunting, rest assured that the process can be straightforward with the right guidance. In this comprehensive guide, we’ll walk you through the steps of filing your Delaware Franchise Tax and provide insights to help you navigate the process effectively.
Memorandum Of Association Constitution of Company.pptseri bangash
www.seribangash.com
A Memorandum of Association (MOA) is a legal document that outlines the fundamental principles and objectives upon which a company operates. It serves as the company's charter or constitution and defines the scope of its activities. Here's a detailed note on the MOA:
Contents of Memorandum of Association:
Name Clause: This clause states the name of the company, which should end with words like "Limited" or "Ltd." for a public limited company and "Private Limited" or "Pvt. Ltd." for a private limited company.
https://seribangash.com/article-of-association-is-legal-doc-of-company/
Registered Office Clause: It specifies the location where the company's registered office is situated. This office is where all official communications and notices are sent.
Objective Clause: This clause delineates the main objectives for which the company is formed. It's important to define these objectives clearly, as the company cannot undertake activities beyond those mentioned in this clause.
www.seribangash.com
Liability Clause: It outlines the extent of liability of the company's members. In the case of companies limited by shares, the liability of members is limited to the amount unpaid on their shares. For companies limited by guarantee, members' liability is limited to the amount they undertake to contribute if the company is wound up.
https://seribangash.com/promotors-is-person-conceived-formation-company/
Capital Clause: This clause specifies the authorized capital of the company, i.e., the maximum amount of share capital the company is authorized to issue. It also mentions the division of this capital into shares and their respective nominal value.
Association Clause: It simply states that the subscribers wish to form a company and agree to become members of it, in accordance with the terms of the MOA.
Importance of Memorandum of Association:
Legal Requirement: The MOA is a legal requirement for the formation of a company. It must be filed with the Registrar of Companies during the incorporation process.
Constitutional Document: It serves as the company's constitutional document, defining its scope, powers, and limitations.
Protection of Members: It protects the interests of the company's members by clearly defining the objectives and limiting their liability.
External Communication: It provides clarity to external parties, such as investors, creditors, and regulatory authorities, regarding the company's objectives and powers.
https://seribangash.com/difference-public-and-private-company-law/
Binding Authority: The company and its members are bound by the provisions of the MOA. Any action taken beyond its scope may be considered ultra vires (beyond the powers) of the company and therefore void.
Amendment of MOA:
While the MOA lays down the company's fundamental principles, it is not entirely immutable. It can be amended, but only under specific circumstances and in compliance with legal procedures. Amendments typically require shareholder
"𝑩𝑬𝑮𝑼𝑵 𝑾𝑰𝑻𝑯 𝑻𝑱 𝑰𝑺 𝑯𝑨𝑳𝑭 𝑫𝑶𝑵𝑬"
𝐓𝐉 𝐂𝐨𝐦𝐬 (𝐓𝐉 𝐂𝐨𝐦𝐦𝐮𝐧𝐢𝐜𝐚𝐭𝐢𝐨𝐧𝐬) is a professional event agency that includes experts in the event-organizing market in Vietnam, Korea, and ASEAN countries. We provide unlimited types of events from Music concerts, Fan meetings, and Culture festivals to Corporate events, Internal company events, Golf tournaments, MICE events, and Exhibitions.
𝐓𝐉 𝐂𝐨𝐦𝐬 provides unlimited package services including such as Event organizing, Event planning, Event production, Manpower, PR marketing, Design 2D/3D, VIP protocols, Interpreter agency, etc.
Sports events - Golf competitions/billiards competitions/company sports events: dynamic and challenging
⭐ 𝐅𝐞𝐚𝐭𝐮𝐫𝐞𝐝 𝐩𝐫𝐨𝐣𝐞𝐜𝐭𝐬:
➢ 2024 BAEKHYUN [Lonsdaleite] IN HO CHI MINH
➢ SUPER JUNIOR-L.S.S. THE SHOW : Th3ee Guys in HO CHI MINH
➢FreenBecky 1st Fan Meeting in Vietnam
➢CHILDREN ART EXHIBITION 2024: BEYOND BARRIERS
➢ WOW K-Music Festival 2023
➢ Winner [CROSS] Tour in HCM
➢ Super Show 9 in HCM with Super Junior
➢ HCMC - Gyeongsangbuk-do Culture and Tourism Festival
➢ Korean Vietnam Partnership - Fair with LG
➢ Korean President visits Samsung Electronics R&D Center
➢ Vietnam Food Expo with Lotte Wellfood
"𝐄𝐯𝐞𝐫𝐲 𝐞𝐯𝐞𝐧𝐭 𝐢𝐬 𝐚 𝐬𝐭𝐨𝐫𝐲, 𝐚 𝐬𝐩𝐞𝐜𝐢𝐚𝐥 𝐣𝐨𝐮𝐫𝐧𝐞𝐲. 𝐖𝐞 𝐚𝐥𝐰𝐚𝐲𝐬 𝐛𝐞𝐥𝐢𝐞𝐯𝐞 𝐭𝐡𝐚𝐭 𝐬𝐡𝐨𝐫𝐭𝐥𝐲 𝐲𝐨𝐮 𝐰𝐢𝐥𝐥 𝐛𝐞 𝐚 𝐩𝐚𝐫𝐭 𝐨𝐟 𝐨𝐮𝐫 𝐬𝐭𝐨𝐫𝐢𝐞𝐬."
Attending a job Interview for B1 and B2 Englsih learnersErika906060
It is a sample of an interview for a business english class for pre-intermediate and intermediate english students with emphasis on the speking ability.
Remote sensing and monitoring are changing the mining industry for the better. These are providing innovative solutions to long-standing challenges. Those related to exploration, extraction, and overall environmental management by mining technology companies Odisha. These technologies make use of satellite imaging, aerial photography and sensors to collect data that might be inaccessible or from hazardous locations. With the use of this technology, mining operations are becoming increasingly efficient. Let us gain more insight into the key aspects associated with remote sensing and monitoring when it comes to mining.
Falcon stands out as a top-tier P2P Invoice Discounting platform in India, bridging esteemed blue-chip companies and eager investors. Our goal is to transform the investment landscape in India by establishing a comprehensive destination for borrowers and investors with diverse profiles and needs, all while minimizing risk. What sets Falcon apart is the elimination of intermediaries such as commercial banks and depository institutions, allowing investors to enjoy higher yields.
2. Slide-2
1. Drivers for CCUS in Abu Dhabi
2. The ESI CCUS & Rumaitha / Bab CO2 Projects – Technical
3. Execution Strategy
4. Future Opportunities
Presentation Outline
3. Slide-3
Abu Dhabi CCUS: Value Drivers
Strategic Gas
Demand
Environmental Commitment to
Abu Dhabi 30%
Clean Energy
CCUS Global &
Regional
Leadership
CCUS Project
Will enable future CCUS Projects
CCUS Projects
ADNOC AD
Government
CO2 capture and
transportation
projects at $/MT
CO2 injection for
EOR Increased oil
Recovery
+
Domestic gas
availability
Gas Liberation
and Enhanced
Oil Recovery
(EOR)
Regulatory
Framework
4. Slide-4
1. Strategic Hydrocarbon Gas Demand
> Considering the power sector in Abu Dhabi alone:
• Growth in hydrocarbon gas demand is expected to
be >1 BSCFD over next 10 years
• Gas Supply sources to grow (domestic / imports) to
meet the demand including LNG imports at high cost
(bw $8-18 / MMBTU)
CCUS Value Drivers
EAA: Abu Dhabi Executive Affairs Authority
> ADNOC is on track of CCUS strategy to enhance oil recovery (EOR) and potentially increase
UAE gas availability, and hence reduce imported LNG dependency.
> This is supported by the EAA “CCS Value Proposition Study” which forecasts a potential
growth in CO2 requirements over next 10-15 years, if the CO2 projects prove to be
successful.
> The ESI CCUS Project is a first commercial mover project which will establish the commercial
principals for a CO2 industry and further demonstrate the technical viability of CO2 operations.
5. Slide-5
2. Environmental
• CCUS or Low Carbon Power is a key strategy to reduce UAE’s greenhouse
gases whilst continuing to meet the country’s growing energy demands.
• The ESI CCUS Project will be the first project of its kind in the region and will
sequester ~800,000T of CO2 per year:
equivalent CO2 from a 200MW CCGT1
equivalent CO2 from ~170,000 cars
equivalent CO2 from ~100,000 houses (US)
• The project will demonstrate the UAE’s global and regional
leadership in the deployment of CCUS and its support
for climate change mitigation mechanisms.
CCUS Value Drivers
Note 1: CCGT: Combined Cycle Gas Turbine power generation
6. Slide-6
3. Commitment to Abu Dhabi 30% Clean Energy
> The Abu Dhabi Clean Energy commitments through Nuclear Energy, Renewable Energy
(7%) and the balance as Low Carbon Power (which includes CCUS).
> Low Carbon Power commitment requires new/revamp CCGT power station capacity and
CO2 capture capacity linked to ADNOC demand.
> 1.0 GW of Low Carbon Power will generate ~5 MMTPA of CO2. It therefore aims to
address:
• Commitment to 30% Clean Energy; AND
• Generating CO2 for ADNOC as part of the gas liberation strategy.
CCUS Value Drivers
7. Slide-7
4. CCUS Global and Regional Leadership
> Deployment of CCUS within the UAE will create a regional knowledge & leadership
focus in this developing industry.
> The EAA “CCS Value Proposition Study” forecasts a growth in related CO2 industry, the
benefits of which include:
• growth in UAE GDP; and
• growth in employment and human capital.
> The ESI CCUS Project will immediately establish
the operating base for the sector’s future growth.
CCUS Value Drivers
8. Slide-8
ESI CCUS: Project Overview
CO2 Source (ESI) and Capture CO2 Compression & Dehydration
CO2 Transportation CO2 Injection in Rumaitha field
9. Slide-9
> ESI Compression & Dehydration Facility
• Located in Mussafah, ESNAAD – adjacent to ESI
• CO2 (>98% purity) from ESI DRI Steel manufacturing
process
• New CO2 facility to:
• Dehydrate the CO2; and
• Compress CO2 for export.
• Design Capacity: 0.8 MMTPA (41 MMSCFD),
> Transportation Pipeline to Rumaitha
• Carbon Steel Pipeline between ESI and Rumaitha.
• CO2 transported in dense phase.
Compression, Dehydration and Transport
DRI; Direct Reduced Iron process which generates direct CO2 for capture.
10. Slide-10
> ADNOC and Masdar are working to develop the CO2 Capture, Transportation &
Injection components
• Masdar responsible to provide technology & project support for the CO2
Capture, Compression and Pipeline facilities; and
• ADNOC (with ADCO) responsible to provide technology & project support for
the CO2 Injection facilities, and the treatment post production.
> Status of Activities:
• Pilot Injection program successfully implemented in Rumaitha (2009 -2011).
• ESI Facility & Pipeline FEED completed in 2010.
• Rumaitha / Bab FEED completed in 2013.
• Compression and Pipeline facilities tender in 2012.
• Rumaitha / Bab Injection facilities forecast 2013.
• Both parties working agreements for cooperative development.
Project Execution Strategy
11. Slide-11
> CO2 as an EOR agent has been endorsed:
• Success of the ESI CCUS Project and Rumaitha / Bab Injection are key to
future development.
> Changing landscape in Abu Dhabi with potential CO2 targets for field
testing and development:
• CO2 capture linked to ADNOC field demand and performance;
> Whilst preliminary, the EAA CCUS Value Proposition study forecast a
growing CO2 demand in the next 25-30 years, based on ADNOC
estimations.
Abu Dhabi CCUS: Future Potential