Barry Jones, General Manager - Asia Pacific for the Global CCS Institute, provides an overview of carbon capture and storage technology including its rationale and a summary of current projects. The presentation also examines impediments to its deployment and recommendations for how to overcome them.
Carbon Capture & Storage - Options For IndiaAniruddha Sharma
The presentation will try to answer a few key questions related to the cost, technology, scalability and risks involved in widespread deployment of the carbon capture and sequestration technology.
CCUS in the USA: Activity, Prospects, and Academic Research - plenary presentation given by Alissa Park at the UKCCSRC Cardiff Biannual Meeting, 10-11 September 2014
The Role of Carbon Capture Storage (CCS) and Carbon Capture Utilization (CCU)...Ofori Kwabena
The role of Carbon Capture and Storage & Carbon Capture and Utilization-
Capturing carbon dioxide and storing (CCS) is a climate change mitigation technology which is aimed at reducing CO2 emissions. The utilization of CO2 (CCU) in the manufacture of commercial products is also a technology used to complement CCS technology.
This paper presents a literature review on the mechanisms, developments, cost analysis, life cycle environmental impacts, challenges and policy options that are associated with these technologies.
Barry Jones, General Manager - Asia Pacific for the Global CCS Institute, provides an overview of carbon capture and storage technology including its rationale and a summary of current projects. The presentation also examines impediments to its deployment and recommendations for how to overcome them.
Carbon Capture & Storage - Options For IndiaAniruddha Sharma
The presentation will try to answer a few key questions related to the cost, technology, scalability and risks involved in widespread deployment of the carbon capture and sequestration technology.
CCUS in the USA: Activity, Prospects, and Academic Research - plenary presentation given by Alissa Park at the UKCCSRC Cardiff Biannual Meeting, 10-11 September 2014
The Role of Carbon Capture Storage (CCS) and Carbon Capture Utilization (CCU)...Ofori Kwabena
The role of Carbon Capture and Storage & Carbon Capture and Utilization-
Capturing carbon dioxide and storing (CCS) is a climate change mitigation technology which is aimed at reducing CO2 emissions. The utilization of CO2 (CCU) in the manufacture of commercial products is also a technology used to complement CCS technology.
This paper presents a literature review on the mechanisms, developments, cost analysis, life cycle environmental impacts, challenges and policy options that are associated with these technologies.
The Asia CCUS Network has been successfully launched on 22-23 June 2021 with initially 13 countries (all ASEAN member countries, the United States, Australia, and Japan) and more than 100 international organisations, companies, financial and research institutions that share the vision of CCUS development throughout the Asian region.
The Network members have expressed their intention to participate to share the vision of the Asia CCUS Network that aims to contribute to the decarbonisation of emissions in Asia through collaboration and cooperation on development and deployment of CCUS.
The Asia CCUS Network provides opportunities for countries in the region to work and collaborate on the low emission technology partnership that will eventually help to build countries’ capability to lower the cost of CCUS technology and its deployment through the collaboration of research and innovation.
At the 2nd Asia CCUS Network (ACN) Knowledge Sharing Conference, the Asia CCUS Network is very pleased to invite experts from the Department of Energy, United States of America (USDOE) to share their insights and experiences about CCUS development and policy to support the deployment of CCUS technology.
The ACN will be an active forum to bridge the knowledge gap on CCUS technologies, policy development to support the development and deployment of CCUS in Asia. Thus, this conference hosted in collaboration with IEA will help to bring in update knowledge, opportunity for investment in CCUS in Asia.
The role of CCS/CCUS in the Climate Action Plan - Dr S. Julio FriedmannGlobal CCS Institute
The role of CCS/CCUS in the Climate Action Plan
Global CCS Institute, delivered at the Global CCS Institute's Third Americas Forum
Feb. 27th, 2014, Washington, DC
Presentation given by Dr EJ Anthony from Cranfield University about Direct Air Capture at the UKCCSRC Direct Air Capture/Negative Emissions Workshop held in London on 18 March 2014
Challenges & barriers to financing industry decarbonisation - Insights from t...OECD Environment
"Challenges and best practices in financing to accelerate industry decarbonisation", OECD Series of Webinars on low carbon hydrogen and industry decarbonisation, 14 June 2023
Webinar: The Global Status of CCS: 2014 - Overcoming challenges in EuropeGlobal CCS Institute
The Global CCS Institute was pleased to announce the release of our annual Global Status of CCS: 2014 report, and invite you to join the Institute’s Europe, Middle East and Africa Team for a webinar summarising the main themes of the report.
The Institute’s General Manager for the region, Andrew Purvis, presented a summary of the report, and was then joined by a number of our subject matter experts to discuss issues raised during the presentation by our global and regional audience.
Chairman: John Scowcroft, Executive Adviser/ UNFCCC Specialist
Presentation: Andrew Purvis, General Manager
Expert Panel:
Kirsty Anderson: Public Engagement
Silvia Vaghi: Policy and Regulation
Guido Magneschi: Capture
Chris Consoli: Storage
The report provides a detailed overview of the current status of CCS projects worldwide and provides a comprehensive overview of global and regional developments in CCS technologies and the policies, laws and regulations that must drive the demonstration and deployment of technologies to support global climate mitigation efforts.
Providing a number of key recommendations for decision makers, The Global Status of CCS: 2014 report is an important reference guide for industry, government, research bodies and the broader community.
The Asia CCUS Network has been successfully launched on 22-23 June 2021 with initially 13 countries (all ASEAN member countries, the United States, Australia, and Japan) and more than 100 international organisations, companies, financial and research institutions that share the vision of CCUS development throughout the Asian region.
The Network members have expressed their intention to participate to share the vision of the Asia CCUS Network that aims to contribute to the decarbonisation of emissions in Asia through collaboration and cooperation on development and deployment of CCUS.
The Asia CCUS Network provides opportunities for countries in the region to work and collaborate on the low emission technology partnership that will eventually help to build countries’ capability to lower the cost of CCUS technology and its deployment through the collaboration of research and innovation.
At the 2nd Asia CCUS Network (ACN) Knowledge Sharing Conference, the Asia CCUS Network is very pleased to invite experts from the Department of Energy, United States of America (USDOE) to share their insights and experiences about CCUS development and policy to support the deployment of CCUS technology.
The ACN will be an active forum to bridge the knowledge gap on CCUS technologies, policy development to support the development and deployment of CCUS in Asia. Thus, this conference hosted in collaboration with IEA will help to bring in update knowledge, opportunity for investment in CCUS in Asia.
The role of CCS/CCUS in the Climate Action Plan - Dr S. Julio FriedmannGlobal CCS Institute
The role of CCS/CCUS in the Climate Action Plan
Global CCS Institute, delivered at the Global CCS Institute's Third Americas Forum
Feb. 27th, 2014, Washington, DC
Presentation given by Dr EJ Anthony from Cranfield University about Direct Air Capture at the UKCCSRC Direct Air Capture/Negative Emissions Workshop held in London on 18 March 2014
Challenges & barriers to financing industry decarbonisation - Insights from t...OECD Environment
"Challenges and best practices in financing to accelerate industry decarbonisation", OECD Series of Webinars on low carbon hydrogen and industry decarbonisation, 14 June 2023
Webinar: The Global Status of CCS: 2014 - Overcoming challenges in EuropeGlobal CCS Institute
The Global CCS Institute was pleased to announce the release of our annual Global Status of CCS: 2014 report, and invite you to join the Institute’s Europe, Middle East and Africa Team for a webinar summarising the main themes of the report.
The Institute’s General Manager for the region, Andrew Purvis, presented a summary of the report, and was then joined by a number of our subject matter experts to discuss issues raised during the presentation by our global and regional audience.
Chairman: John Scowcroft, Executive Adviser/ UNFCCC Specialist
Presentation: Andrew Purvis, General Manager
Expert Panel:
Kirsty Anderson: Public Engagement
Silvia Vaghi: Policy and Regulation
Guido Magneschi: Capture
Chris Consoli: Storage
The report provides a detailed overview of the current status of CCS projects worldwide and provides a comprehensive overview of global and regional developments in CCS technologies and the policies, laws and regulations that must drive the demonstration and deployment of technologies to support global climate mitigation efforts.
Providing a number of key recommendations for decision makers, The Global Status of CCS: 2014 report is an important reference guide for industry, government, research bodies and the broader community.
Webinar: Global Status of CCS: 2014 - Powering ahead in The AmericasGlobal CCS Institute
Dr Elizabeth Burton, the Global CCS Institute’s General Manager – The Americas, provided an overview of the status of CCS projects worldwide with a focus on developments in the Americas, including the launch of Boundary Dam, the world’s first large-scale power plant with CCS. The global and regional policy landscape, developments in CCS/CCUS technologies, and recommendations for decision makers to advance the development and deployment of CCS/CCUS were also discussed.
The webinar was based on the findings in the Institute’s Global Status of CCS: 2014 report. It was designed for individuals interested and involved in the development and deployment of CCS/CCUS in the Americas, including technology, policy and regulation, and capacity development.
Webinar: The cost effectiveness of natural gas combined cycle power plants wi...Global CCS Institute
This second webinar was held on Friday 25th April, for anyone who wasn't able to join us for the previous webinar held on Thursday 20th March.
This webinar presented the findings of a study to assess the economic viability of natural gas combined-cycle power plants with CO2 capture and storage (NGCC-CCS) in climate change mitigation strategies, emphasising the use of renewable energy and natural gas for electric power generation. In this study, the cost of NGCC-CCS was compared on a level playing field to those of intermittent renewable energy systems (IRES) and energy storage technologies as a means of reducing power sector greenhouse gas emissions. Specifically, the levelised cost of electricity (LCOE) of NGCC-CCS was compared to that of offshore wind, photovoltaic systems, and concentrated solar power (CSP) together with pumped hydro storage (PHS), compressed air energy storage (CAES), and Li-ion, ZEBRA and Zn-Br battery storage systems. The cost of NGCC-CCS as a backup technology in conjunction with IRES also was assessed.
At this webinar, Machteld van den Broek, senior researcher at the Utrecht University, presented the findings of the study. Her expertise is energy systems modelling and CCS. Among others, she is involved in the CATO-2 programme, the second Dutch national research programme on CCS. During the webinar Professor Edward Rubin from Carnegie Mellon University and co-author of this study, will assist during the Q&A session. Niels Berghout, from Utrecht University also contributed to this study.
Webinar: A discussion of the findings and implications of Synthesis of CCS So...Global CCS Institute
This webinar was held on Thursday 17 July 2014, and provided an opportunity to hear Peta Ashworth and Dr. Anne-Maree Dowd (CSIRO) reflect on their ambitious attempt to synthesise the key findings from a comprehensive four-year-long body of social research into carbon capture and storage (CCS).
The report, Synthesis of CCS Social Research: Reflections and State of Play 2013 was designed to provide an accessible summary and guide into the emerging thinking and best practices for those working to improve public understanding and acceptance of CCS technology.
During this webinar, the authors presented an overview of the report findings, joining Global CCS Institute Public Engagement Manager, Kirsty Anderson, to discuss audience questions around the current state of play of CCS social research and best practice public engagement.
Some 6,500 km of CO2 pipelines has been operating for years, primarily in the United States. More recently, a number of these pipelines have been used for CO2 re-use or carbon capture and storage (CCS) operations in Europe and the Americas. Valuable experience and lessons learnt are available from these projects relevant for all phases of CO2 pipeline projects:, from early identification to execution and operation.
Based on a wide range of interviews and literature, Ecofys and SNC-Lavalin gathered information on 29 CO2 pipeline projects and then made the results accessible in a database. A reference manual was then written based on this information. This comprehensive document offers an overview of results and lessons learnt, serving as a guide to key issues on CO2 pipelines. The document relates to a number of examples in the database.
In this webinar, Frank Wiersma from Ecofys presented an overview of the study, discussing the process, lessons learnt, and findings relevant for the development, realisation and operation of CO2 pipelines.
This study was commissioned by the IEA GHG on behalf of the Global CCS Institute.
This is a presentation delivered by Luke Warren of the CCSA at the Institute’s COP 17 side event, held on November 30. The presentation reviews the history of CCS discussions under the UNFCCC and proposes a path forward.
The Global CCS Institute hosted a workshop on 6 June 2013 in Calgary, Alberta, on the role of new bi-national storage standards in the deployment of CCS in Canada and the United States.
NSPS Subpart OOOO: Applicability and Compliance BasicsAll4 Inc.
Roy Rakiewicz of ALL4 Inc, presents "General Applicability of NSPS Subpart OOOO: Applicability and Compliance Basics". The presentation provides detailed information on: affected facilities, rule structure, storage vessel affected facilities, and gas well affected facilities.
Northern Lights: A European CO2 transport and storage project Global CCS Institute
The Global CCS Institute hosted the final webinar of its "Telling the Norwegian CCS Story" series which presented Northern Lights. This project is part of the Norwegian full-scale CCS project which will include the capture of CO2 at two industrial facilities (cement and waste-to-energy plants), transport and permanent storage of CO2 in a geological reservoir on the Norwegian Continental Shelf.
Northern Lights aims to establish an open access CO2 transport and storage service for Europe. It is the first integrated commercial project of its kind able to receive CO2 from a variety of industrial sources. The project is led by Equinor with two partners Shell and Total. Northern Lights aims to drive the development of CCS in Europe and globally.
Webinar: Policy priorities to incentivise large scale deployment of CCSGlobal CCS Institute
The Global CCS Institute released a new report highlighting strategic policy priorities for the large-scale deployment of carbon capture and storage (CCS). The Institute’s report also reviews the progress achieved until now with existing policies and the reasons behind positive investment decisions for the current 23 large-scale CCS projects in operation and construction globally.
Telling the Norwegian CCS Story | PART II: CCS: the path to a sustainable and...Global CCS Institute
The Global CCS Institute in collaboration with Gassnova hosted the second webinar of its "Telling the Norwegian CCS Story" series.
The second webinar presented Norcem's CCS project at their cement production facility in Brevik, in the South-Eastern part of Norway.
Telling the Norwegian CCS Story | PART I: CCS: the path to sustainable and em...Global CCS Institute
In 2018, the Norwegian government announced its decision to continue the planning of a demonstration project for CO2 capture, transport and storage. This webinar focuses on the Fortum Oslo Varme CCS project. This is one of the two industrial CO2 sources in the Norwegian full-scale project.
At their waste-to-energy plant at Klemetsrud in Oslo, Fortum Oslo Varme produces electricity and district heating for the Oslo region by incinerating waste. Its waste-to-energy plant is one of the largest land-based sources of CO2 emissions in Norway, counting for about 20 % of the city of Oslo’s total emissions. The CCS project in Oslo is an important step towards a sustainable waste system and the creation of a circular economy. It will be the first energy recovery installation for waste disposal treatment with full-scale CCS.
Fortum Oslo Varme has understood the enormous potential for the development of a CCS industry in the waste-to-energy industry. The company is working to capture 90 % of its CO2 emissions, the equivalent of 400 000 tons of CO2 per year. This project will open new opportunities to reduce emissions from the waste sector in Norway and globally. Carbon capture from waste incineration can remove over 90 million tons of CO2 per year from existing plants in Europe. There is high global transfer value and high interest in the industry for the project in Oslo.
The waste treated consists of almost 60 % biological carbon. Carbon capture at waste-to-energy plants will therefore be so-called BIO-CCS (i.e. CCS from the incineration of organic waste, thereby removing the CO2 from the natural cycle).
Find out more about the project by listening to our webinar.
Decarbonizing Industry Using Carbon Capture: Norway Full Chain CCSGlobal CCS Institute
Industrial sectors such as steel, cement, iron, and chemicals production are responsible for over 20 percent of global carbon dioxide (CO2) emissions. To be on track to meet greenhouse gas emissions reduction targets established as part of the Paris Climate Accord, all sectors must find solutions to rapidly decarbonize, and carbon capture and storage (CCS) technology is the only path for energy-intensive industries.
This webinar will explore how one country, Norway, is working to realize a large-scale Full Chain CCS project, where it is planning to apply carbon capture technology to several industrial facilities. This unique project explores capturing CO2 from three different industrial facilities - an ammonia production plant, a waste-to-energy plant, and a cement production facility. Captured CO2 will be then transported by ship to a permanent off-shore storage site operated as part of a collaboration between Statoil, Total, and Shell. When operational, Norway Full Chain CCS will capture and permanently store up to 1.5 million tons of CO2 per year.
During this webinar, Michael Carpenter, Senior Adviser at Gassnova, will provide an overview of the Norway Full Chain CCS, and discuss the value that Norway aims to derive from it. The key stakeholders working on this exciting project, and how they cooperate, will be also discussed. Gassnova is a Norwegian state enterprise focusing on CCS technology, which manages the Norway Full Chain CCS project.
Cutting Cost of CO2 Capture in Process Industry (CO2stCap) Project overview &...Global CCS Institute
The CO2StCap project is a four year initiative carried out by industry and academic partners with the aim of reducing capture costs from CO2 intensive industries (more info here). The project, led by Tel-Tek, is based on the idea that cost reduction is possible by capturing only a share of the CO2emissions from a given facility, instead of striving for maximized capture rates. This can be done in multiple ways, for instance by capturing only from the largest CO2 sources at individual multi-stack sites utilising cheap waste heat or adapting the capture volumes to seasonal changes in operations.
The main focus of this research is to perform techno-economic analyses for multiple partial CO2 capture concepts in order to identify economic optimums between cost and volumes captured. In total for four different case studies are developed for cement, iron & steel, pulp & paper and ferroalloys industries.
The first part of the webinar gave an overview of the project with insights into the cost estimation method used. The second part presented the iron & steel industry case study based on the Lulea site in Sweden, for which waste-heat mapping methodology has been used to assess the potential for partial capture via MEA-absorption. Capture costs for different CO2 sources were compared and discussed, demonstrating the viability of partial capture in an integrated steelworks.
Webinar presenters included Ragnhild Skagestad, senior researcher at Tel-Tek; Maximilian Biermann, PhD student at Division of Energy Technology, Chalmers University of Technology and Maria Sundqvist, research engineer at the department of process integration at Swerea MEFOS.
The Global CCS Institute and USEA co-hosted a briefing on the importance of R&D in advancing energy technologies on June 29 2017. This is the presentation given by Ron Munson, Global Lead-Capture at the Global CCS Institute.
The Global CCS Institute and USEA co-hosted a briefing on the importance of R&D in advancing energy technologies on June 29 2017. This is the presentation given by Alfred “Buz” Brown, Founder, CEO and Chairman of ION Engineering.
The Global CCS Institute and USEA co-hosted a briefing on the importance of R&D in advancing energy technologies on June 29 2017. This is the presentation given by Tim Merkel, Director, Research and Development Group at Membrane Technology & Research (MTR)
Mission Innovation aims to reinvigorate and accelerate global clean energy innovation with the objective to make clean energy widely affordable. Through a series of Innovation Challenges, member countries have pledged to support actions aimed at accelerating research, development, and demonstration (RD&D) in technology areas where MI members believe increased international attention would make a significant impact in our shared fight against climate change. The Innovation Challenges cover the entire spectrum of RD&D; from early stage research needs assessments to technology demonstration projects.
The Carbon Capture Innovation challenge aims to explore early stage research opportunities in the areas of Carbon Capture, Carbon Utilization, and Carbon Storage. The goal of the Carbon Capture Innovation Challenge is twofold: first, to identify and prioritize breakthrough technologies; and second, to recommend research, development, and demonstration (RD&D) pathways and collaboration mechanisms.
During the webinar, Dr Tidjani Niass, Saudi Aramco, and Jordan Kislear, US Department of Energy, provided an overview of progress to date. They also highlighted detail opportunities for business and investor engagement, and discuss future plans for the Innovation Challenge.
Karl Hausker, PhD, Senior Fellow, Climate Program, World Resources Institute, is the leader of the analytic and writing team for the latest study by the Risky Business Project: From Risk to Return: Investing in a Clean Energy Economy. Co-Chairs Michael Bloomberg, Henry Paulson, Jr, and Thomas Steyer tasked the World Resources Institute with this independent assessment of technically and economically feasible pathways that the US could follow to achieve an 80% reduction in CO2 emissions by 2050. These pathways involve mixtures of: energy efficiency, renewable energy, nuclear power, carbon capture and storage, increased carbon sequestration in US lands, and reductions in non-CO2 emissions. These pathways rely on commercial or near-commercial technologies that American companies are adopting and developing.
Dr Hausker presented the results of the study and draw some comparisons to the US Mid Century Strategy report submitted to the UNFCCC. He has worked for 30 years in the fields of climate change, energy, and environment in a career that has spanned legislative and executive branches, research institutions, NGOs, and consulting.
This webinar offered a unique opportunity to learn more about various decarbonization scenarios and to address your questions directly to Dr Hausker.
Webinar Series: Carbon Sequestration Leadership Forum Part 1. CCUS in the Uni...Global CCS Institute
The Carbon Sequestration Leadership Forum (CSLF) is a Ministerial-level international climate change initiative that is focused on the development of improved cost-effective technologies for carbon capture and storage (CCS). As part of our commitment to raising awareness of CCS policies and technology, CSLF, with support from the Global CCS Institute, is running a series of webinars showcasing academics and researchers that are working on some of the most interesting CCS projects and developments from around the globe.
This first webinar comes to you from Abu Dhabi – the site of the Mid-Year CSLF Meeting and home of the Al Reyadah Carbon Capture, Utilization & Storage (CCUS) Project. The United Arab Emirates (UAE) is one of the world’s major oil exporters, with some of the highest levels of CO2 emissions per capita. These factors alone make this a very interesting region for the deployment of CCUS both as an option for reducing CO2 emissions, but also linking these operations for the purposes of enhanced oil recovery (EOR) operations.
In the UAE, CCUS has attracted leading academic institutes and technology developers to work on developing advanced technologies for reducing CO2 emissions. On Wednesday, 26th April, we had the opportunity to join the Masdar Institute’s Associate Professor of Chemical Engineering, Mohammad Abu Zahra to learn about the current status and potential for CCUS in the UAE.
Mohammad presented an overview of the current large scale CCUS demonstration project in the UAE, followed by a presentation and discussion of the ongoing research and development activities at the Masdar Institute.
This webinar offered a rare opportunity to put your questions directly to this experienced researcher and learn more about the fascinating advances being made at the Masdar Institute.
Energy Security and Prosperity in Australia: A roadmap for carbon capture and...Global CCS Institute
On 15 February, a Roadmap titled for Energy Security and Prosperity in Australia: A roadmap for carbon capture and storage was released. The ACCS Roadmap contains analysis and recommendations for policy makers and industry on much needed efforts to ensure CCS deployment in Australia.
This presentation focused on the critical role CCS can play in Australia’s economic prosperity and energy security. To remain within its carbon budget, Australia must accelerate the deployment of CCS. Couple with this, only CCS can ensure energy security for the power sector and high-emissions industries whilst maintain the the vital role the energy sector plays in the Australian economy.
The webinar also detailed what is required to get Australia ready for widespread commercial deployment of CCS through specific set of phases, known as horizons in strategic areas including storage characterisation, legal and regulatory frameworks and public engagement and awareness.
The Roadmap serves as an important focal point for stakeholders advocating for CCS in Australia, and will provide a platform for further work feeding into the Australian Government’s review of climate policy in 2017 and beyond.
It is authored by the University of Queensland and Gamma Energy Technology, and was overseen by a steering committee comprising the Commonwealth Government, NSW Government, CSIRO, CO2CRC Limited, ACALET - COAL21 Fund and ANLEC R&D.
This webinar was presented by Professor Chris Greig, from The University of Queensland.
Webinar Series: Public engagement, education and outreach for CCS. Part 5: So...Global CCS Institute
The fifth webinar in the public engagement, education and outreach for CCS Series will explore the critically important subject of social site characterisation with the very researchers who named the process.
We were delighted to be able to reunite CCS engagement experts Sarah Wade and Sallie Greenberg, Ph.D. to revisit their 2011 research and guidance: ‘Social Site Characterisation: From Concept to Application’. When published, this research and toolkit helped early CCS projects worldwide to raise the bar on their existing engagement practices. For this webinar, we tasked these early thought leaders with reminding us of the importance of this research and considering the past recommendations in today’s context. Sarah and Sallie tackled the following commonly asked questions:
What exactly is meant by social site characterisation?
Why it is important?
What would they consider best practice for getting to understand the social intricacies and impacts of a CCS project site?
This entire Webinar Series has been designed to share leading research and best practice and consider these learnings as applied to real project examples. So for this fifth Webinar, we were really pleased to be joined by Ruth Klinkhammer, Senior Manager, Communications and Engagement at CMC Research Institutes. Ruth agreed to share some of her experiences and challenges of putting social site characterisation into practice onsite at some of CMC’s larger research projects.
This Webinar combined elements of public engagement research with real world application and discussion, explore important learnings and conclude with links to further resources for those wishing to learn more. This a must for anyone working in or studying carbon capture and storage or other CO2 abatement technologies. If you have ever nodded along at a conference where the importance of understanding stakeholders is acknowledged, but then stopped to wonder – what might that look like in practice? This Webinar is for you.
Managing carbon geological storage and natural resources in sedimentary basinsGlobal CCS Institute
To highlight the research and achievements of Australian researchers, the Global CCS Institute, together with Australian National Low Emissions Coal Research and Development (ANLEC R&D), will hold a series of webinars throughout 2017. Each webinar will highlight a specific ANLEC R&D research project and the relevant report found on the Institute’s website.
This is the eighth webinar of the series and will present on basin resource management and carbon storage. With the ongoing deployment of CCS facilities globally, the pore space - the voids in the rock deep in sedimentary basins – are now a commercial resource. This is a relatively new concept with only a few industries utilising that pore space to date.
This webinar presented a framework for the management of basin resources including carbon storage. Prospective sites for geological storage of carbon dioxide target largely sedimentary basins since these provide the most suitable geological settings for safe, long-term storage of greenhouse gases. Sedimentary basins can host different natural resources that may occur in isolated pockets, across widely dispersed regions, in multiple locations, within a single layer of strata or at various depths.
In Australia, the primary basin resources are groundwater, oil and gas, unconventional gas, coal and geothermal energy. Understanding the nature of how these resources are distributed in the subsurface is fundamental to managing basin resource development and carbon dioxide storage. Natural resources can overlap laterally or with depth and have been developed successfully for decades. Geological storage of carbon dioxide is another basin resource that must be considered in developing a basin-scale resource management system to ensure that multiple uses of the subsurface can sustainably and pragmatically co-exist.
This webinar was presented by Karsten Michael, Research Team Leader, CSIRO Energy.
Mercury and other trace metals in the gas from an oxy-combustion demonstratio...Global CCS Institute
To highlight the research and achievements of Australian researchers, the Global CCS Institute together with ANLEC R&D will hold a series of webinars throughout 2017. Each webinar will highlight a specific ANLEC R&D research project and the relevant report found on the Institute’s website. This is the seventh webinar of the series and presented the results of a test program on the retrofitted Callide A power plant in Central Queensland.
The behaviour of trace metals and the related characteristics of the formation of fine particles may have important implications for process options, gas cleaning, environmental risk and resultant cost in oxy-fuel combustion. Environmental and operational risk will be determined by a range of inter-related factors including:
The concentrations of trace metals in the gas produced from the overall process;
Capture efficiencies of the trace species in the various air pollution control devices used in the process; including gas and particulate control devices, and specialised systems for the removal of specific species such as mercury;
Gas quality required to avoid operational issues such as corrosion, and to enable sequestration in a variety of storage media without creating unacceptable environmental risks; the required quality for CO2 transport will be defined by (future and awaited) regulation but may be at the standards currently required of food or beverage grade CO2; and
Speciation of some trace elements
Macquarie University was engaged by the Australian National Low Emissions Coal Research and Development Ltd (ANLEC R&D) to investigate the behaviour of trace elements during oxy-firing and CO2 capture and processing in a test program on the retrofitted Callide A power plant, with capability for both oxy and air-firing. Gaseous and particulate sampling was undertaken in the process exhaust gas stream after fabric filtration at the stack and at various stages of the CO2 compression and purification process. These measurements have provided detailed information on trace components of oxy-fired combustion gases and comparative measurements under air fired conditions. The field trials were supported by laboratory work where combustion took place in a drop tube furnace and modelling of mercury partitioning using the iPOG model.
The results obtained suggest that oxy-firing does not pose significantly higher environmental or operational risks than conventional air-firing. The levels of trace metals in the “purified” CO2 gas stream should not pose operational issues within the CO2 Processing Unit (CPU).
This webinar was presented by Peter Nelson, Professor of Environmental Studies, and Anthony Morrison, Senior Research Fellow, from the Department of Environmental Sciences, Macquarie University.
Webinar Series: Public engagement, education and outreach for CCS. Part 4: Is...Global CCS Institute
Teesside Collective has been developing a financial support mechanism to kickstart an Industrial Carbon Capture and Storage (CCS) network in the UK. This project would transform the Teesside economy, which could act as a pilot area in the UK as part of the Government’s Industrial Strategy.
The final report– produced by Pöyry Management Consulting in partnership with Teesside Collective – outlines how near-term investment in CCS can be a cost-effective, attractive proposition for both Government and energy-intensive industry.
The report was published on Teesside Collective’s website on 7 February. You will be able to view copies of the report in advance of the webinar.
We were delighted to welcome Sarah Tennison from Tees Valley Combined Authority back onto the webinar programme. Sarah was joined by Phil Hare and Stuart Murray from Pöyry Management Consulting, to take us through the detail of the model and business case for Industrial CCS.
This webinar offered a rare opportunity to speak directly with these project developers and understand more about their proposed financial support mechanism.
Laboratory-scale geochemical and geomechanical testing of near wellbore CO2 i...Global CCS Institute
To highlight the research and achievements of Australian researchers, the Global CCS Institute together with ANLEC R&D will hold a series of webinars throughout 2016 and 2017. Each webinar will highlight a specific ANLEC R&D research project and the relevant report found on the Institute’s website. This is the sixth webinar of the series and presented the results of chemical and mechanical changes that carbon dioxide (CO2) may have at a prospective storage complex in the Surat Basin, Queensland, Australia.
Earth Sciences and Chemical Engineering researchers at the University of Queensland have been investigating the effects of supercritical CO2 injection on reservoir properties in the near wellbore region as a result of geochemical reactions since 2011. The near wellbore area is critical for CO2 injection into deep geological formations as most of the resistance to flow occurs in this region. Any changes to the permeability can have significant economic impact in terms of well utilisation efficiency and compression costs. In the far field, away from the well, the affected reservoir is much larger and changes to permeability through blocking or enhancement have relatively low impact.
This webinar was presented by Prof Sue Golding and Dr Grant Dawson and will provide an overview of the findings of the research to assist understanding of the beneficial effects and commercial consequences of near wellbore injectivity enhancement as a result of geochemical reactions.
Webinar Series: Public engagement, education and outreach for CCS. Part 3: Ca...Global CCS Institute
The third webinar in the public engagement, education and outreach for CCS Series digged deeper, perhaps multiple kilometres deeper, to explore successful methods for engaging the public on the often misunderstood topic of carbon (CO2) storage.
Forget bad experiences of high school geology, we kick-started our 2017 webinar program with three ‘rock stars’ of CO2 storage communication – Dr Linda Stalker, Science Director of Australia’s National Geosequestration Laboratory, Lori Gauvreau, Communication and Engagement Specialist for Schlumberger Carbon Services, and Norm Sacuta, Communication Manager at the Petroleum Technology Research Centre who all joined Kirsty Anderson, the Institute’s Senior Advisor on Public Engagement, to discuss the challenges of communicating about CO2 storage. They shared tips, tools and some creative solutions for getting people engaged with this topic.
This entire Webinar Series has been designed to hear directly from the experts and project practitioners researching and delivering public engagement, education and outreach best practice for carbon capture and storage. This third webinar was less focused on research and more on the real project problems and best practice solutions. It is a must for anyone interested in science communication/education and keen to access resources and ideas to make their own communications more engaging.
Water use of thermal power plants equipped with CO2 capture systemsGlobal CCS Institute
The potential for increased water use has often been noted as a challenge to the widespread deployment of carbon capture and storage (CCS) to mitigate greenhouse gas emissions. Early studies, that are widely referenced and cited in discussions of CCS, indicated that installation of a capture system would nearly double water consumption for thermal power generation, while more recent studies show different results. The Global CCS Institute has conducted a comprehensive review of data available in order to clarify messages around water consumption associated with installation of a capture system. Changes in water use estimates over time have been evaluated in terms of capture technology, cooling systems, and how the data are reported.
Guido Magneschi, Institute’s Senior Advisor – Carbon Capture, and co-author of the study, presented the results of the review and illustrated the main conclusions.
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...Neo4j
Leonard Jayamohan, Partner & Generative AI Lead, Deloitte
This keynote will reveal how Deloitte leverages Neo4j’s graph power for groundbreaking digital twin solutions, achieving a staggering 100x performance boost. Discover the essential role knowledge graphs play in successful generative AI implementations. Plus, get an exclusive look at an innovative Neo4j + Generative AI solution Deloitte is developing in-house.
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...James Anderson
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
Epistemic Interaction - tuning interfaces to provide information for AI supportAlan Dix
Paper presented at SYNERGY workshop at AVI 2024, Genoa, Italy. 3rd June 2024
https://alandix.com/academic/papers/synergy2024-epistemic/
As machine learning integrates deeper into human-computer interactions, the concept of epistemic interaction emerges, aiming to refine these interactions to enhance system adaptability. This approach encourages minor, intentional adjustments in user behaviour to enrich the data available for system learning. This paper introduces epistemic interaction within the context of human-system communication, illustrating how deliberate interaction design can improve system understanding and adaptation. Through concrete examples, we demonstrate the potential of epistemic interaction to significantly advance human-computer interaction by leveraging intuitive human communication strategies to inform system design and functionality, offering a novel pathway for enriching user-system engagements.
A tale of scale & speed: How the US Navy is enabling software delivery from l...sonjaschweigert1
Rapid and secure feature delivery is a goal across every application team and every branch of the DoD. The Navy’s DevSecOps platform, Party Barge, has achieved:
- Reduction in onboarding time from 5 weeks to 1 day
- Improved developer experience and productivity through actionable findings and reduction of false positives
- Maintenance of superior security standards and inherent policy enforcement with Authorization to Operate (ATO)
Development teams can ship efficiently and ensure applications are cyber ready for Navy Authorizing Officials (AOs). In this webinar, Sigma Defense and Anchore will give attendees a look behind the scenes and demo secure pipeline automation and security artifacts that speed up application ATO and time to production.
We will cover:
- How to remove silos in DevSecOps
- How to build efficient development pipeline roles and component templates
- How to deliver security artifacts that matter for ATO’s (SBOMs, vulnerability reports, and policy evidence)
- How to streamline operations with automated policy checks on container images
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024Neo4j
Neha Bajwa, Vice President of Product Marketing, Neo4j
Join us as we explore breakthrough innovations enabled by interconnected data and AI. Discover firsthand how organizations use relationships in data to uncover contextual insights and solve our most pressing challenges – from optimizing supply chains, detecting fraud, and improving customer experiences to accelerating drug discoveries.
Elevating Tactical DDD Patterns Through Object CalisthenicsDorra BARTAGUIZ
After immersing yourself in the blue book and its red counterpart, attending DDD-focused conferences, and applying tactical patterns, you're left with a crucial question: How do I ensure my design is effective? Tactical patterns within Domain-Driven Design (DDD) serve as guiding principles for creating clear and manageable domain models. However, achieving success with these patterns requires additional guidance. Interestingly, we've observed that a set of constraints initially designed for training purposes remarkably aligns with effective pattern implementation, offering a more ‘mechanical’ approach. Let's explore together how Object Calisthenics can elevate the design of your tactical DDD patterns, offering concrete help for those venturing into DDD for the first time!
Dr. Sean Tan, Head of Data Science, Changi Airport Group
Discover how Changi Airport Group (CAG) leverages graph technologies and generative AI to revolutionize their search capabilities. This session delves into the unique search needs of CAG’s diverse passengers and customers, showcasing how graph data structures enhance the accuracy and relevance of AI-generated search results, mitigating the risk of “hallucinations” and improving the overall customer journey.
LF Energy Webinar: Electrical Grid Modelling and Simulation Through PowSyBl -...DanBrown980551
Do you want to learn how to model and simulate an electrical network from scratch in under an hour?
Then welcome to this PowSyBl workshop, hosted by Rte, the French Transmission System Operator (TSO)!
During the webinar, you will discover the PowSyBl ecosystem as well as handle and study an electrical network through an interactive Python notebook.
PowSyBl is an open source project hosted by LF Energy, which offers a comprehensive set of features for electrical grid modelling and simulation. Among other advanced features, PowSyBl provides:
- A fully editable and extendable library for grid component modelling;
- Visualization tools to display your network;
- Grid simulation tools, such as power flows, security analyses (with or without remedial actions) and sensitivity analyses;
The framework is mostly written in Java, with a Python binding so that Python developers can access PowSyBl functionalities as well.
What you will learn during the webinar:
- For beginners: discover PowSyBl's functionalities through a quick general presentation and the notebook, without needing any expert coding skills;
- For advanced developers: master the skills to efficiently apply PowSyBl functionalities to your real-world scenarios.
DevOps and Testing slides at DASA ConnectKari Kakkonen
My and Rik Marselis slides at 30.5.2024 DASA Connect conference. We discuss about what is testing, then what is agile testing and finally what is Testing in DevOps. Finally we had lovely workshop with the participants trying to find out different ways to think about quality and testing in different parts of the DevOps infinity loop.
Sudheer Mechineni, Head of Application Frameworks, Standard Chartered Bank
Discover how Standard Chartered Bank harnessed the power of Neo4j to transform complex data access challenges into a dynamic, scalable graph database solution. This keynote will cover their journey from initial adoption to deploying a fully automated, enterprise-grade causal cluster, highlighting key strategies for modelling organisational changes and ensuring robust disaster recovery. Learn how these innovations have not only enhanced Standard Chartered Bank’s data infrastructure but also positioned them as pioneers in the banking sector’s adoption of graph technology.
UiPath Test Automation using UiPath Test Suite series, part 4DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 4. In this session, we will cover Test Manager overview along with SAP heatmap.
The UiPath Test Manager overview with SAP heatmap webinar offers a concise yet comprehensive exploration of the role of a Test Manager within SAP environments, coupled with the utilization of heatmaps for effective testing strategies.
Participants will gain insights into the responsibilities, challenges, and best practices associated with test management in SAP projects. Additionally, the webinar delves into the significance of heatmaps as a visual aid for identifying testing priorities, areas of risk, and resource allocation within SAP landscapes. Through this session, attendees can expect to enhance their understanding of test management principles while learning practical approaches to optimize testing processes in SAP environments using heatmap visualization techniques
What will you get from this session?
1. Insights into SAP testing best practices
2. Heatmap utilization for testing
3. Optimization of testing processes
4. Demo
Topics covered:
Execution from the test manager
Orchestrator execution result
Defect reporting
SAP heatmap example with demo
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
UiPath Test Automation using UiPath Test Suite series, part 5DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 5. In this session, we will cover CI/CD with devops.
Topics covered:
CI/CD with in UiPath
End-to-end overview of CI/CD pipeline with Azure devops
Speaker:
Lyndsey Byblow, Test Suite Sales Engineer @ UiPath, Inc.
UiPath Test Automation using UiPath Test Suite series, part 5
Monitoring CCS and CCUS projects for GHG regulatory compliance , Pamela Tomski, Global CCS Institute
1. Monitoring CCS / CCUS Projects for
Greenhouse Gas (GHG) Regulatory Compliance
Pamela Tomski
Senior Advisor, Policy & Regulatory – The Americas
Global CCS Institute
Advanced Workshop for CO2 Storage
August 26-27, 2014
DF IPN ESIA Ticomán Auditorium
SUPPORTED BY:
2. Outline
• Why monitor for greenhouse gas (GHG) regulatory
compliance?
• U.S. GHG reporting
• U.S. Underground Injection Control Program (UIC)
• CCS / CCUS in carbon markets – credits and offsets
• International Standards Organization (ISO) process
for CCS / CCUS
SUPPORTED BY:
3. Monitoring for Regulatory Compliance
From a regulatory perspective, monitoring plans and
monitoring is necessary to:
• Ensure safe, effective, and acceptable CO2 control
• Secure injection well permits
• Confirm / refine CO2 storage modeling predictions
• Verify safe and effective CO2 storage
• Support accounting and verification for credits / offsets
• Promote public confidence
SUPPORTED BY:
4. U.S. Greenhouse Gas (GHG) Reporting
• Requires annual GHG
reporting
• Includes geologic storage –
saline and EOR
• Data is reported to inform
future policy decisions related
to GHGs and CCS
• Information is reported via e-
GGRT (public, web-based
system)
SUPPORTED BY:
US EPA: http://www.epa.gov/ghgreporting/index.html
6. CO2 Injection Sites Reporting Under Subpart UU
US EPA: http://www.epa.gov/ghgreporting/reporters/subpart/uu.html
SUPPORTED BY:
7. Subpart RR –Geologic Storage
• Subpart RR - well(s) that injects
CO2 for long-term storage
• Reports mass balance: (1)
stored CO2 and (2) CO2 emitted
to atmosphere
• CO2 EOR facilities are not
required to report unless:
- Operator “opts-in” to RR
- Facility holds Class VI
(geologic storage) permit
CO2 received
CO2 injected
CO2 produced
CO2 emitted from
surface leaks
CO2 emitted from
equipment leaks
CO2 source (if known)
MRV Plan
US EPA: http://www.epa.gov/ghgreporting/reporters/subpart/rr.html
SUPPORTED BY:
8. Monitoring Reporting and Verification (MRV)
Plan – Major Elements
1. Identify maximum monitoring area (MMA) and
active monitoring areas (AMA)
2. Identify potential CO2 surface leakage pathways
(EOR focus on wells)
3. Provide a strategy for CO2 leakage detection /
quantification
4. Undertake “baseline” measurements (pre-injection
conditions)
5. Site-specific variables for the mass balance
equation CO2
SUPPORTED BY:
US EPA Class VI Well Project Plan Development Guidance:
http://water.epa.gov/type/groundwater/uic/class6/upload/epa816r11017.pdf
9. Underground Injection Control (UIC) Program
• UIC rules are to protect
underground sources of
drinking water
• Class II – EOR (reports
GHGs under Subpart UU)
• Class II – EOR-storage is
allowed but must “opt-in”
to Subpart RR
• Class VI – Geologic
Storage (reports under
Subpart RR)
US EPA: http://water.epa.gov/type/groundwater/uic/wells_sequestration.cfm
SUPPORTED BY:
11. Class II – VI Transition
• EOR owner or operator with Class II (EOR) permit must
obtain a Class VI (Geologic Storage) permit when both:
(1) the primary purpose of CO2 injection changes
from the recovery of oil to long-term storage, and
(2) that change increases risk to underground
sources of drinking water
• Even if stakeholders agree CO2-EOR should receive
storage credit while remaining within EOR regulatory
framework (Class II), there is no consensus on what MVR
or other standards would be appropriate for verification
SUPPORTED BY:
US EPA Transitioning Class II to Class VI Wells – Guidance:
http://water.epa.gov/type/groundwater/uic/class6/upload/epa816p13004.pdf
12. Regulatory Gaps and Issues
• Like most jurisdictions, the U.S. does not have a comprehensive,
integrated CCS / CCUS regulatory framework
• GHG reporting rules compliment – but are not integrated with -
UIC rules
• Transition from Class II – Class VI is currently not workable
according to EOR operators
• Only EPA can determine site closure, which is unacceptable for mineral
owners who must wind down activities following EOR
• 50-year post-closure monitoring and long-term liability problematic
• There are no standards governing MRV Plans or timelines for EPA
approval
• Many open questions such as – Will purchasers of CO2 from power
plants be expected / required to report under Subpart RR?
SUPPORTED BY:
13. CCS / CCUS in carbon markets – credits and
offsets
• Credits can generate income to offset the cost of CCS /
CCUS (current carbon prices too low to make a
meaningful difference and policy action is needed)
• CCS / CCUS accounting methodologies are still under
development but are considered in some markets:
• Kyoto Protocol Clean Development Mechanism (CDM)
• European Union Emission Trading System (EU ETS)
• Alberta Offset System quantification protocols for EOR
• American Carbon Registry (ACR) – California
• Emerging market linkages (e.g. California / Alberta)
offers potential for Mexico and CCUS projects
SUPPORTED BY:
14. American Carbon Registry (ACR)
• 1st U.S. voluntary carbon registry –
39.5 MMT CO2 since 1996
• Develops and approves carbon
accounting protocols and verifies
projects
• Approved offset registry under
California’s Cap-and-Trade Program
• Five registered CCS projects
including EOR
SUPPORTED BY:
Winrock, 2013
15. ACR Methodology for CCS / CCUS
• Methodology for CCS-EOR / CCUS
developed by Blue Strategies is
currently undergoing peer review
• Ongoing discussions on
methodology for saline storage
• Methodologies are consistent with
industry best practices, EPA
reporting requirements and the
C2ES report Greenhouse Gas
Accounting Framework for Carbon
Capture and Storage Projects (Feb
2012)
http://www.c2es.org/publications/greenhouse-gas-accounting-framework-carbon-capture-and-
storage-projects
SUPPORTED BY:
16. Some key issues and questions
• Project boundary
• Leakage – how long do you
monitor post-injection? How
do you assure permanence?
• Crediting Period – 10 years
or longer to recover
investment
• Eligibility – can ACR be used
to comply with new EPA
proposed rules for power
plants? Class II vs Class VI?
* MRV – should requirements be prescribed or developed on
project basis? Can methodology evolve to incorporate MRV
improvements?
SUPPORTED BY:
17. Standards
• The International Organization for Standards (ISO)
develops and publishes standards
• Developed by a panel with technical committees made
up of experts (e.g. industry, consumer associations,
academia, NGOs, government) from all over the world
• The ISO process is not legislative – it draws on industry
best practices and influences them
• Various jurisdictions often reference ISO standards and
incorporate them into regulatory developments
SUPPORTED BY:
19. ISO TC 265 for CCS / CCUS - Participating
Countries
Australia Malaysia
Canada Netherlands
China Norway
France South Africa
Germany Spain
India Sweden
Italy Switzerland
Japan United Kingdom
Korea United States (ANSI)
SUPPORTED BY:
Voting
Members
Guaranteed
International
Expert
Participation
on all WGs
Steve Carpenter (ARI), 2014
21. ISO TC 265-Working Group 6 – CO2-EOR
US Chair, Norway support
• Low-pressure subsurface oil
field operating environments
• Reservoir and pore space
management
• Manage known lateral
stratigraphic traps in the target
formation
• Coordination with WGs1-5
SUPPORTED BY:
14 US Members
1 - Norway
5 - Canada
2 – China
2 - Japan
2 - IEA
26 Total Members
Expected:
France
UK
Liaisons
Steve Carpenter (ARI), 2014
22. ISO TC 265-Working Group 4 – Quantification &
Verification
China Chair, France support
• Project boundary and leakage
• CO2 quantification
• Monitoring and reporting
• Third party verification
• Life Cycle Analysis
SUPPORTED BY:
Steve Carpenter (ARI), 2014
23. Thank You! Questions?
Pamela Tomski
Senior Advisor, Policy & Regulatory – The Americas
Global CCS Institute
Washington, DC
Pamela.Tomski@globalccsinstitute.com
Tel: 202 390 8896
SUPPORTED BY: