This document outlines the agenda for two seminar sessions on network configuration. Session 1 will cover multi-WAN configurations, multi-LAN subnets, VLANs, LAN-to-LAN VPN, remote dial-in VPN, and load balancing policies. Session 2 will cover high availability, user management, access point management, wireless airtime fairness, and bandwidth management. The document provides detailed outlines of the topics to be discussed in each session.
DrayTek RoadShow 2015 @ Portugal (Setembro) - Sessão 2DrayTek Corp.
The document summarizes various topics related to wireless network management including high availability, user management, AP management, WiFi airtime fairness, AP station statistics, and bandwidth management. Specifically, it discusses setting up high availability using hot-standby and active-standby modes, customizing the login page and creating guest accounts, the plug-and-play process for AP setup, monitoring APs using dashboards and traffic graphs, implementing airtime fairness to provide equal channel access to all stations, and testing bandwidth without airtime fairness enabled.
DrayTek's EuP ( energy using products ) compliant solutions will assist residential / business users to reduce environmental burden and strengthen environmental performance.
With the objective of the EuP Directives :
Improve energy efficiency throughout the product’s life-cycle from mining of the raw materials to its end-of-life recycling, DrayTek will endeavor continuously by improving eco-friendly
communications system, material supply, production, transportation and decommission of DrayTek series products.
Multicast routing configuration and lab example in MikroTik
video multicast routing 1 router
https://www.youtube.com/watch?v=nqUlUIB93Mg
video multicast routing 2 router over wireless
https://www.youtube.com/watch?v=eYEocGYsGZ4
Konfig VLC sebagai stream server multicast
https://www.youtube.com/watch?v=Z1lthcBSSrM
Konfig VLC sebagai player
https://www.youtube.com/watch?v=s2uTs8NRQpY
Webinar NETGEAR - Switch Prosafe Stackable per l'alta disponibilità (HA) dell...Netgear Italia
La funzionalità di true stacking per il disegno di una rete, o parti essa, in alta disponibilità. Una rapida analisi delle opportunità messe a disposizione dalla linea di prodotti Prosafe con le famiglie di switch S3300, M4300, M5300 e M7300.
The document provides information about installing and configuring Cisco Unified Communications Manager (UCM):
- It describes the basic installation process for UCM, which involves booting from a DVD and running the Platform Installation Wizard. Upgrades can install new software while keeping the existing configuration database.
- Important configuration settings that must be specified include DHCP/static networking, DNS, NTP, security password, and SMTP settings for email notifications.
- A UCM cluster provides redundancy through multiple call processing servers that devices can register with. The cluster is configured through a shared database for call control data.
VoIP Basics covers the components and call flow of VoIP systems using Cisco Call Manager Express (CME). It discusses how VoIP digitizes voice into data packets using codecs and DSP chips. Key benefits of Cisco Unified Call Manager (CUCM) include supporting audio and video, operating in redundant server clusters, and integrating directories. CUCM uses a clustered server setup with an Informix database for call signaling and media.
This document provides instructions for configuring network infrastructure including VLANs, voice ports, and dial peers for a voice lab.
The key tasks covered are:
1. Creating VLANs on a switch for voice and data traffic between headquarters and a remote site.
2. Configuring voice ports on routers to support different voice protocols including MGCP, SIP, and H323. This includes configuring T1 and E1 ports to communicate with call managers and service providers.
3. Creating dial peers on routers to allow inbound and outbound PSTN calling for 911, local, long distance, and international calls.
DrayTek RoadShow 2015 @ Portugal (Setembro) - Sessão 2DrayTek Corp.
The document summarizes various topics related to wireless network management including high availability, user management, AP management, WiFi airtime fairness, AP station statistics, and bandwidth management. Specifically, it discusses setting up high availability using hot-standby and active-standby modes, customizing the login page and creating guest accounts, the plug-and-play process for AP setup, monitoring APs using dashboards and traffic graphs, implementing airtime fairness to provide equal channel access to all stations, and testing bandwidth without airtime fairness enabled.
DrayTek's EuP ( energy using products ) compliant solutions will assist residential / business users to reduce environmental burden and strengthen environmental performance.
With the objective of the EuP Directives :
Improve energy efficiency throughout the product’s life-cycle from mining of the raw materials to its end-of-life recycling, DrayTek will endeavor continuously by improving eco-friendly
communications system, material supply, production, transportation and decommission of DrayTek series products.
Multicast routing configuration and lab example in MikroTik
video multicast routing 1 router
https://www.youtube.com/watch?v=nqUlUIB93Mg
video multicast routing 2 router over wireless
https://www.youtube.com/watch?v=eYEocGYsGZ4
Konfig VLC sebagai stream server multicast
https://www.youtube.com/watch?v=Z1lthcBSSrM
Konfig VLC sebagai player
https://www.youtube.com/watch?v=s2uTs8NRQpY
Webinar NETGEAR - Switch Prosafe Stackable per l'alta disponibilità (HA) dell...Netgear Italia
La funzionalità di true stacking per il disegno di una rete, o parti essa, in alta disponibilità. Una rapida analisi delle opportunità messe a disposizione dalla linea di prodotti Prosafe con le famiglie di switch S3300, M4300, M5300 e M7300.
The document provides information about installing and configuring Cisco Unified Communications Manager (UCM):
- It describes the basic installation process for UCM, which involves booting from a DVD and running the Platform Installation Wizard. Upgrades can install new software while keeping the existing configuration database.
- Important configuration settings that must be specified include DHCP/static networking, DNS, NTP, security password, and SMTP settings for email notifications.
- A UCM cluster provides redundancy through multiple call processing servers that devices can register with. The cluster is configured through a shared database for call control data.
VoIP Basics covers the components and call flow of VoIP systems using Cisco Call Manager Express (CME). It discusses how VoIP digitizes voice into data packets using codecs and DSP chips. Key benefits of Cisco Unified Call Manager (CUCM) include supporting audio and video, operating in redundant server clusters, and integrating directories. CUCM uses a clustered server setup with an Informix database for call signaling and media.
This document provides instructions for configuring network infrastructure including VLANs, voice ports, and dial peers for a voice lab.
The key tasks covered are:
1. Creating VLANs on a switch for voice and data traffic between headquarters and a remote site.
2. Configuring voice ports on routers to support different voice protocols including MGCP, SIP, and H323. This includes configuring T1 and E1 ports to communicate with call managers and service providers.
3. Creating dial peers on routers to allow inbound and outbound PSTN calling for 911, local, long distance, and international calls.
The document provides information about a CCNP Voice training course, including:
- The course is divided into 3 modules covering topics such as Cisco Unified Communications Manager, voice gateways, quality of service, and Microsoft integration.
- Module 1 covers Cisco Voice over IP, Cisco Unified Communications Manager Express, dial plans, and quality of service.
- Module 2 covers Cisco Unified Communications Manager administration and troubleshooting.
- Module 3 covers voice messaging, video telephony, contact centers, and case studies.
Data over Coax - The Best Last Mile Access Technology before FTTHTeleste Corporation
Data over coax is presented as the best last mile access technology before full fiber to the home (FttH). On-demand TV services are driving exponential growth in network traffic that will double every 18 months. Distributed cable modem termination system (CMTS) architectures using data over coax can provide high bandwidth to typical fiber to the last amplifier (FttLA) or fiber to the building (FttB) segment sizes of 100 subscribers in a future-proof way. Data over coax is a promising solution when sustained high speeds are needed, such as for IPTV traffic, businesses, or WiFi hotspots. Deploying distributed CMTS in network "hot spots" is seen as an attractive migration path
The document provides an overview and training on Vega VoIP gateways from Sangoma. It discusses the Vega product portfolio, initial gateway configuration including IP address setup, web interface navigation, basic "Quick Config" settings, and dial plan concepts. Practical examples are given for analog FXS and E1/T1 configuration, with instructions on submitting, applying and saving configuration changes.
Maximizing High Performance Applications with CAN BusJanel Heilbrunn
CAN Bus offers speed, reliability and flexibility at an affordable cost, which makes it perfect for embedded applications requiring budget-friendly multi-processor communication. This brand-new ICS webinar offers an introduction to CAN Bus, and is directed at developers with no previous experience with CAN Bus or related technologies.
This document provides an overview and introduction to the Aruba 8400 switch, which is designed for campus core and aggregation applications. It describes the hardware architecture including line cards, management modules, fabric modules, and power supplies. It also discusses the software architecture of ArubaOS-CX running on the 8400 and its high availability, programmability, security, and analytics capabilities. Example deployments of the 8400 as a campus core and aggregation solution are shown.
The document discusses a new methodology for planning very high density 802.11ac wireless networks. It involves 5 steps: 1) Choosing the number of channels, 2) Choosing the unimpaired channel throughput, 3) Applying an impairment factor based on venue type, 4) Choosing a reuse factor of 1, 5) Calculating total system throughput separately for 2.4GHz and 5GHz bands. Key aspects are using 20MHz channels, all available DFS channels, and accounting for impairments from interference and client mix.
In this presentation, we will discuss how Virtual Switching Framework (VSF) allows supported switches connected to each other through Ethernet connections (copper or fibre) to behave like a single chassis switch. Check out the webinar recording where this presentation was used: http://community.arubanetworks.com/t5/Controllerless-Networks/Technical-Webinar-Virtual-Switching-Framework-ArubaOS-Switch/td-p/445696
Register for the upcoming webinars: https://community.arubanetworks.com/t5/Training-Certification-Career/EMEA-Airheads-Webinars-Jul-Dec-2017/td-p/271908
The document outlines how to remotely control an amateur radio using TRX-Manager software over the internet. It discusses using a dynamic DNS service to find the radio's IP address as it may change, and using Virtual Network Computing (VNC) to view and control the radio's desktop remotely. The full remote operation is demonstrated using TRX-Manager, VNC, and NetMeeting to allow remote radio control, audio, and rotor control over the internet.
This document discusses setting up a low-cost and secure VPN using MikroTik SSTP over the Indonesian Internet infrastructure. It describes how SSTP uses SSL encryption to pass through firewalls and establish secure tunnels between MikroTik routers. The solution avoids expensive dedicated VPN links by using domestic Internet exchanges to connect branch offices to the head office while maintaining security with SSTP encryption and MikroTik configuration.
This document introduces Broadband Remote Access Server (B-RAS), which facilitates convergence of multiple internet traffic sources like cable, DSL, Ethernet, and broadband wireless. It routes traffic to and from broadband remote access devices. The B-RAS sits at the core of an ISP's network and aggregates user sessions from the access network. It provides benefits like being a single point of change control and using a common operational model independent of the access network technology. Key functions of B-RAS include aggregating circuits, providing layer 2 connectivity, enforcing QoS policies, and routing IP traffic through the ISP's backbone network.
Learn from the best of Industry Trainers .11 Full CCIE DC Racks based in New Jersey USA and Bangalore India .Call us or emails us rack@networkershome.com or info@networkershome.com
Aruba Campus Switching
Aruba 2930f switch
The Changing Role of Network Switches، now HPE (Aruba) Receives the Highest Score in 5 out of 6 Gartner Critical Capabilities Use Cases
Future Proofing Your Network with the New Cisco Catalyst 3850 10G Aggregation...Cisco Enterprise Networks
Learn how the newest members of the Cisco Catalyst 3850 Series switching family can future-proof your network with 10Gb performance in the aggregation layer.
A very quick introduction to HFC, DOCSIS 3.0 and 3.1Erik Vloothuis
For those interested in HFC and DOCSIS with a base knowledge of TCP/IP and RF concepts. Presented on the 22/3/16 to TCP/IP Student Group at Swinburne University of Technology
The document outlines topics to be covered in two seminar sessions on connecting to the Internet and network configuration using a router. Session 1 will discuss multi-subnet VLAN configuration, LAN-to-LAN VPN protocols and setup, and remote dial-in VPN access. Session 2 will cover content security, user management, access point management, bandwidth management, and WiFi airtime fairness.
Secure Network Design with High-Availability & VoIPArpan Patel
Networking, the communication between two or more networks, encompasses every aspect of connecting computers together. With the evolution of networking and the Internet, the threats to
information and networks have risen dramatically and performance has depleted enormously.
As a company grows its business its network design needs to be updated from the existing network
and expand it to accommodate additional users or workloads. But the diculty arises as networks
are being pressured to cost less, yet support the emerging applications and higher number of users
with increased performance. As personal, government and business-critical applications become
more prevalent on the Internet, it is imperative that all networks be protected from threats and
vulnerabilities in order for a business to achieve its fullest potential. Hence a Secure Design for a
network is critical in todays expanding corporate world.
The TP Link ER 605 V2 is a multi-WAN wired single-band 1000 Mbps VPN router with up to 4 gigabit WAN ports. It provides load balancing across internet connections, integrated Omada SDN for centralized management, and security features like SPI firewall and VPN. It has 1 fixed and 2 configurable gigabit WAN/LAN ports, 2 additional LAN ports, and a USB port to connect a 4G/3G modem as a wireless backup WAN. Key performance capabilities include high throughput rates for various connection types, strong VPN support, and robust security functions.
Presentation by Kevin Smith, Vodafone & Chair ETSI NGP (Next Generation Protocols) at the URLLC 2017 conference on Nov. 14, 2017.
*** Shared with Permission ***
The document provides information about a CCNP Voice training course, including:
- The course is divided into 3 modules covering topics such as Cisco Unified Communications Manager, voice gateways, quality of service, and Microsoft integration.
- Module 1 covers Cisco Voice over IP, Cisco Unified Communications Manager Express, dial plans, and quality of service.
- Module 2 covers Cisco Unified Communications Manager administration and troubleshooting.
- Module 3 covers voice messaging, video telephony, contact centers, and case studies.
Data over Coax - The Best Last Mile Access Technology before FTTHTeleste Corporation
Data over coax is presented as the best last mile access technology before full fiber to the home (FttH). On-demand TV services are driving exponential growth in network traffic that will double every 18 months. Distributed cable modem termination system (CMTS) architectures using data over coax can provide high bandwidth to typical fiber to the last amplifier (FttLA) or fiber to the building (FttB) segment sizes of 100 subscribers in a future-proof way. Data over coax is a promising solution when sustained high speeds are needed, such as for IPTV traffic, businesses, or WiFi hotspots. Deploying distributed CMTS in network "hot spots" is seen as an attractive migration path
The document provides an overview and training on Vega VoIP gateways from Sangoma. It discusses the Vega product portfolio, initial gateway configuration including IP address setup, web interface navigation, basic "Quick Config" settings, and dial plan concepts. Practical examples are given for analog FXS and E1/T1 configuration, with instructions on submitting, applying and saving configuration changes.
Maximizing High Performance Applications with CAN BusJanel Heilbrunn
CAN Bus offers speed, reliability and flexibility at an affordable cost, which makes it perfect for embedded applications requiring budget-friendly multi-processor communication. This brand-new ICS webinar offers an introduction to CAN Bus, and is directed at developers with no previous experience with CAN Bus or related technologies.
This document provides an overview and introduction to the Aruba 8400 switch, which is designed for campus core and aggregation applications. It describes the hardware architecture including line cards, management modules, fabric modules, and power supplies. It also discusses the software architecture of ArubaOS-CX running on the 8400 and its high availability, programmability, security, and analytics capabilities. Example deployments of the 8400 as a campus core and aggregation solution are shown.
The document discusses a new methodology for planning very high density 802.11ac wireless networks. It involves 5 steps: 1) Choosing the number of channels, 2) Choosing the unimpaired channel throughput, 3) Applying an impairment factor based on venue type, 4) Choosing a reuse factor of 1, 5) Calculating total system throughput separately for 2.4GHz and 5GHz bands. Key aspects are using 20MHz channels, all available DFS channels, and accounting for impairments from interference and client mix.
In this presentation, we will discuss how Virtual Switching Framework (VSF) allows supported switches connected to each other through Ethernet connections (copper or fibre) to behave like a single chassis switch. Check out the webinar recording where this presentation was used: http://community.arubanetworks.com/t5/Controllerless-Networks/Technical-Webinar-Virtual-Switching-Framework-ArubaOS-Switch/td-p/445696
Register for the upcoming webinars: https://community.arubanetworks.com/t5/Training-Certification-Career/EMEA-Airheads-Webinars-Jul-Dec-2017/td-p/271908
The document outlines how to remotely control an amateur radio using TRX-Manager software over the internet. It discusses using a dynamic DNS service to find the radio's IP address as it may change, and using Virtual Network Computing (VNC) to view and control the radio's desktop remotely. The full remote operation is demonstrated using TRX-Manager, VNC, and NetMeeting to allow remote radio control, audio, and rotor control over the internet.
This document discusses setting up a low-cost and secure VPN using MikroTik SSTP over the Indonesian Internet infrastructure. It describes how SSTP uses SSL encryption to pass through firewalls and establish secure tunnels between MikroTik routers. The solution avoids expensive dedicated VPN links by using domestic Internet exchanges to connect branch offices to the head office while maintaining security with SSTP encryption and MikroTik configuration.
This document introduces Broadband Remote Access Server (B-RAS), which facilitates convergence of multiple internet traffic sources like cable, DSL, Ethernet, and broadband wireless. It routes traffic to and from broadband remote access devices. The B-RAS sits at the core of an ISP's network and aggregates user sessions from the access network. It provides benefits like being a single point of change control and using a common operational model independent of the access network technology. Key functions of B-RAS include aggregating circuits, providing layer 2 connectivity, enforcing QoS policies, and routing IP traffic through the ISP's backbone network.
Learn from the best of Industry Trainers .11 Full CCIE DC Racks based in New Jersey USA and Bangalore India .Call us or emails us rack@networkershome.com or info@networkershome.com
Aruba Campus Switching
Aruba 2930f switch
The Changing Role of Network Switches، now HPE (Aruba) Receives the Highest Score in 5 out of 6 Gartner Critical Capabilities Use Cases
Future Proofing Your Network with the New Cisco Catalyst 3850 10G Aggregation...Cisco Enterprise Networks
Learn how the newest members of the Cisco Catalyst 3850 Series switching family can future-proof your network with 10Gb performance in the aggregation layer.
A very quick introduction to HFC, DOCSIS 3.0 and 3.1Erik Vloothuis
For those interested in HFC and DOCSIS with a base knowledge of TCP/IP and RF concepts. Presented on the 22/3/16 to TCP/IP Student Group at Swinburne University of Technology
The document outlines topics to be covered in two seminar sessions on connecting to the Internet and network configuration using a router. Session 1 will discuss multi-subnet VLAN configuration, LAN-to-LAN VPN protocols and setup, and remote dial-in VPN access. Session 2 will cover content security, user management, access point management, bandwidth management, and WiFi airtime fairness.
Secure Network Design with High-Availability & VoIPArpan Patel
Networking, the communication between two or more networks, encompasses every aspect of connecting computers together. With the evolution of networking and the Internet, the threats to
information and networks have risen dramatically and performance has depleted enormously.
As a company grows its business its network design needs to be updated from the existing network
and expand it to accommodate additional users or workloads. But the diculty arises as networks
are being pressured to cost less, yet support the emerging applications and higher number of users
with increased performance. As personal, government and business-critical applications become
more prevalent on the Internet, it is imperative that all networks be protected from threats and
vulnerabilities in order for a business to achieve its fullest potential. Hence a Secure Design for a
network is critical in todays expanding corporate world.
The TP Link ER 605 V2 is a multi-WAN wired single-band 1000 Mbps VPN router with up to 4 gigabit WAN ports. It provides load balancing across internet connections, integrated Omada SDN for centralized management, and security features like SPI firewall and VPN. It has 1 fixed and 2 configurable gigabit WAN/LAN ports, 2 additional LAN ports, and a USB port to connect a 4G/3G modem as a wireless backup WAN. Key performance capabilities include high throughput rates for various connection types, strong VPN support, and robust security functions.
Presentation by Kevin Smith, Vodafone & Chair ETSI NGP (Next Generation Protocols) at the URLLC 2017 conference on Nov. 14, 2017.
*** Shared with Permission ***
The document proposes an architecture for establishing a distributed IP-PBX communication system using multiple voice registers on different platforms and integrating both packet-switched and circuit-switched networks. It provides background on telecommunication technologies and protocols as well as an example case study of implementing the proposed architecture for a nationwide organization with distributed regional offices connected over an IP network. The case study demonstrates configuration of an Asterisk server and Cisco routers to enable voice communication between the regional branches using both the IP network and public switched telephone network.
CCNA Training in Bangalore | Best Networking course in BangaloreTIB Academy
At TIB Academy, you will get the best CCNA training in Bangalore. To clear Cisco CCNA Certification, you need to be very good in basic networking concepts like network topology and network layers. So, enroll in our Networking Course immediately to get the best CCNA training and certification assistance
9.) audio video ethernet (avb cobra net dante)Jeff Green
Replacing a crossbar switch with ‘virtual’ IP packet switching - The ability to expand video-over-IP systems ‘one piece at a time’ and the decentralized nature of the matrix makes the technology very compelling for any size or scope of AV project.. AV-over-IP is the transport of AV signals over a standard Ethernet network, including…
HD Video (e.g. HDMI, DVI)
Audio
Control Signals (e.g. IR)
Peripheral Signals (e.g. USB)
Does Dante require special switches? No. We strongly recommend that Gigabit switches be used due to the clear advantages in performance and scalability.
Does Dante require a dedicated network infrastructure? No, a dedicated network infrastructure is not required. Dante-enabled devices can happily coexist with other equipment making use of the network, such as general purpose PCs sending and receiving email and other data.
Does Dante require any special network infrastructure? No, special network infrastructure is not required. Since Dante is based upon universally accepted networking standards, Dante-enabled devices can be connected using inexpensive off-the-shelf Ethernet switches and cabling.
What features are important when purchasing a switch? Dante makes use of standard Voice over IP (VoIP) Quality of Service (QoS) switch features, to prioritize clock sync and audio traffic over other network traffic. VoIP QoS features are available in a variety of inexpensive and enterprise Ethernet switches. Any switches with the following features should be appropriate for use with Dante:
Gigabit ports for inter-switch connections
Quality of Service (QoS) with 4 queues
Diffserv (DSCP) QoS, with strict priority
Totally new to AV over IT? This may help. If you have worked with any of the popular protocols, your time is better spent in other sessions. AV over IT methods vary in application of OSI model. Audio Networking - One RJ45 and CAT5 cable for dozens of signal paths. Switches can provide hardware time stamping which allows synchronization, offsets, and corrections. All covered in IEEE 1588.
Ethernet Timing & Priority Standards - All audio over Ethernet protocols require Priority, Sequence, & Sync
Differentiated Services / Quality of Service (DiffServ, QoS)
Priority by data type (Clock Sync and Audio Packets over Email)
Traffic prioritized based upon tags in IP Header (Layer 3)
Priority number assigned by manage switch to each packet
Real-time Transport Protocol (RTP)
Keeps data sequenced in the right order
Time stamp on UDP header
Works with RTCP (Real Time Control Protocol) for QoS and Sync
Variation: RTSP (Real Time Streaming Protocol) works on TCP and not UDP
Does not reserve resources or provide for quality of service
Precision Timing Protocol (PTP)
IEEE 1588
Sub-microsecond accuracy to synchronize subnets
Layer 2 - Switches provide hardware-based time stamping
This document provides instructions for configuring a network client. It describes installing the network interface card driver, accessing the network connections window, selecting protocols like NetBEUI or TCP/IP, and configuring services and components. It also discusses identifying the client by giving it a computer name and selecting a workgroup or domain. The key steps are installing the NIC driver, selecting a single network protocol, enabling necessary services, and identifying the client with a name and network affiliation.
This document provides an overview and tutorial of the pfSense firewall software. It discusses the history and evolution of pfSense from earlier firewall projects. Key features of pfSense are highlighted such as its customized FreeBSD distribution tailored for firewall and routing use. Hardware requirements, popular hardware platforms, installation methods, and initial configuration steps are outlined. Advanced functions like VPN, NAT, firewall rules, aliases, and multi-WAN configurations are also summarized.
The document provides an overview of considerations for implementing an all-wireless workplace including wireless devices, wireless office requirements, RF considerations, high availability, broadcast suppression, and visibility. It discusses topics such as channel planning, client matching, data rates, channel width, controller redundancy, broadcast domain segmentation, and application visibility solutions from Aruba Networks. The document also promotes Aruba Solution Exchange (ASE) as a tool for generating wireless network configurations.
Interconnecting Neutron and Network Operators' BGP VPNsThomas Morin
joint presentation given at OpenStack summit Barcelona (Oct. 2016) with Paul Carver and Tim Irnich
talk video: https://www.youtube.com/watch?v=LCDeR7MwTzE
demo: https://www.youtube.com/watch?v=5iRoZcmQyuU
This document provides an introduction and comparison of common audio networking protocols: AVB/TSN, CobraNet, and Dante. It begins with an overview of networking basics using the OSI model. It then reviews each protocol, covering their technical capabilities, setup requirements, and strengths. Key points include AVB/TSN requiring certified switches but providing plug-and-play installation and excellent sync at 1-5ms latency. CobraNet is tried-and-true but has declining adoption and requires a dedicated network. Dante has wide adoption, works on standard networks, and offers flexible routing and redundancy at <0.15-5ms latency. The document concludes that the goal is meeting user needs, and any protocol can suffice
Advanced OpenVPN Concepts on pfSense 2.4 & 2.3.3 - pfSense Hangout February 2017Netgate
The document provides an overview of advanced OpenVPN concepts in pfSense including improvements in OpenVPN 2.4, device modes, routing methods, multi-WAN tactics, client-specific overrides, and tips. It discusses tunnel networks, assigning OpenVPN interfaces, gateway groups, policy routing, dynamic routing with OSPF, and using client-specific overrides with SSL/TLS. The document is intended as a presentation and discussion of these topics rather than a complete demonstration.
1) The document discusses several common messaging protocols for IoT including HTTP, CoAP, MQTT, and AMQP.
2) It compares the architecture, implementation weight, data transport capabilities, communication patterns supported, and security features of each protocol.
3) The document concludes that the choice of protocol depends on factors like device constraints, network reliability, message rate, and need to process data payloads. No single protocol is optimal for all situations.
This document provides an overview of a 4-day training course on Carrier Ethernet. Day 1 covers introductions, product overviews, and carrier Ethernet services. Day 2 covers device security, switchport configurations, and QoS. Day 3 focuses on Ethernet CFM and service activation tests. Day 4 covers scenario-based exercises and SNMP monitoring. The training aims to provide attendees with knowledge and hands-on experience in deploying and managing Carrier Ethernet networks and services.
This document provides tips and tricks for network operations. It discusses several case studies including TCP MSS tweaks, MPLS L2 VPN tweaks, IPv6 subnetting, use of BGP communities for prefix announcements, and route redistribution. For each case study, it describes the problem, explains the solution, and provides configuration examples. It also covers router security topics for IPv4 and IPv6 like securing management access, SNMP, SSH, user authentication, and RADIUS authentication.
Site-to-Site VPNs - pfSense Hangout November 2015Netgate
This document provides an overview and discussion of site-to-site VPNs using IPsec and OpenVPN. It discusses the basics of VPNs including limitations, policy-based vs routed VPNs, prerequisites, and differences between IPsec and OpenVPN. It then demonstrates how to configure basic site-to-site VPN connections between two sites for both IPsec and OpenVPN shared key. Finally, it discusses considerations for connecting multiple sites in a mesh or hub-and-spoke topology and provides a simple example of a 3-way hub-and-spoke configuration for both IPsec and OpenVPN shared key.
In the context of parallel computing, Load Balancing is the distribution of a set of tasks over different computing units (or related resources), to make the overall process easier to execute and much more efficient. Ensuring no single server bears too much of demand and evenly spreading the load, it improves the responsiveness and availability of applications or websites for the user.
Similar to DrayTek RoadShow 2015 @ Portugal (Setembro) - Sessão 1 (20)
Communications Mining Series - Zero to Hero - Session 1DianaGray10
This session provides introduction to UiPath Communication Mining, importance and platform overview. You will acquire a good understand of the phases in Communication Mining as we go over the platform with you. Topics covered:
• Communication Mining Overview
• Why is it important?
• How can it help today’s business and the benefits
• Phases in Communication Mining
• Demo on Platform overview
• Q/A
Sudheer Mechineni, Head of Application Frameworks, Standard Chartered Bank
Discover how Standard Chartered Bank harnessed the power of Neo4j to transform complex data access challenges into a dynamic, scalable graph database solution. This keynote will cover their journey from initial adoption to deploying a fully automated, enterprise-grade causal cluster, highlighting key strategies for modelling organisational changes and ensuring robust disaster recovery. Learn how these innovations have not only enhanced Standard Chartered Bank’s data infrastructure but also positioned them as pioneers in the banking sector’s adoption of graph technology.
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!SOFTTECHHUB
As the digital landscape continually evolves, operating systems play a critical role in shaping user experiences and productivity. The launch of Nitrux Linux 3.5.0 marks a significant milestone, offering a robust alternative to traditional systems such as Windows 11. This article delves into the essence of Nitrux Linux 3.5.0, exploring its unique features, advantages, and how it stands as a compelling choice for both casual users and tech enthusiasts.
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdfMalak Abu Hammad
Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers:
* What is Vector Search?
* Importance and benefits of vector search
* Practical use cases across various industries
* Step-by-step implementation guide
* Live demos with code snippets
* Enhancing LLM capabilities with vector search
* Best practices and optimization strategies
Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications.
#MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024Neo4j
Neha Bajwa, Vice President of Product Marketing, Neo4j
Join us as we explore breakthrough innovations enabled by interconnected data and AI. Discover firsthand how organizations use relationships in data to uncover contextual insights and solve our most pressing challenges – from optimizing supply chains, detecting fraud, and improving customer experiences to accelerating drug discoveries.
Maruthi Prithivirajan, Head of ASEAN & IN Solution Architecture, Neo4j
Get an inside look at the latest Neo4j innovations that enable relationship-driven intelligence at scale. Learn more about the newest cloud integrations and product enhancements that make Neo4j an essential choice for developers building apps with interconnected data and generative AI.
UiPath Test Automation using UiPath Test Suite series, part 6DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 6. In this session, we will cover Test Automation with generative AI and Open AI.
UiPath Test Automation with generative AI and Open AI webinar offers an in-depth exploration of leveraging cutting-edge technologies for test automation within the UiPath platform. Attendees will delve into the integration of generative AI, a test automation solution, with Open AI advanced natural language processing capabilities.
Throughout the session, participants will discover how this synergy empowers testers to automate repetitive tasks, enhance testing accuracy, and expedite the software testing life cycle. Topics covered include the seamless integration process, practical use cases, and the benefits of harnessing AI-driven automation for UiPath testing initiatives. By attending this webinar, testers, and automation professionals can gain valuable insights into harnessing the power of AI to optimize their test automation workflows within the UiPath ecosystem, ultimately driving efficiency and quality in software development processes.
What will you get from this session?
1. Insights into integrating generative AI.
2. Understanding how this integration enhances test automation within the UiPath platform
3. Practical demonstrations
4. Exploration of real-world use cases illustrating the benefits of AI-driven test automation for UiPath
Topics covered:
What is generative AI
Test Automation with generative AI and Open AI.
UiPath integration with generative AI
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Dr. Sean Tan, Head of Data Science, Changi Airport Group
Discover how Changi Airport Group (CAG) leverages graph technologies and generative AI to revolutionize their search capabilities. This session delves into the unique search needs of CAG’s diverse passengers and customers, showcasing how graph data structures enhance the accuracy and relevance of AI-generated search results, mitigating the risk of “hallucinations” and improving the overall customer journey.
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdfPaige Cruz
Monitoring and observability aren’t traditionally found in software curriculums and many of us cobble this knowledge together from whatever vendor or ecosystem we were first introduced to and whatever is a part of your current company’s observability stack.
While the dev and ops silo continues to crumble….many organizations still relegate monitoring & observability as the purview of ops, infra and SRE teams. This is a mistake - achieving a highly observable system requires collaboration up and down the stack.
I, a former op, would like to extend an invitation to all application developers to join the observability party will share these foundational concepts to build on:
GraphRAG for Life Science to increase LLM accuracyTomaz Bratanic
GraphRAG for life science domain, where you retriever information from biomedical knowledge graphs using LLMs to increase the accuracy and performance of generated answers
How to Get CNIC Information System with Paksim Ga.pptxdanishmna97
Pakdata Cf is a groundbreaking system designed to streamline and facilitate access to CNIC information. This innovative platform leverages advanced technology to provide users with efficient and secure access to their CNIC details.
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...Neo4j
Leonard Jayamohan, Partner & Generative AI Lead, Deloitte
This keynote will reveal how Deloitte leverages Neo4j’s graph power for groundbreaking digital twin solutions, achieving a staggering 100x performance boost. Discover the essential role knowledge graphs play in successful generative AI implementations. Plus, get an exclusive look at an innovative Neo4j + Generative AI solution Deloitte is developing in-house.
2. 2
• Multi WAN
- WAN Types
- Load Balance and Backup
- Triple Play
- WAN Budget
• Multi LAN Subnets / VLAN
- Port-Based
- Tag-Based
- Inter-LAN Routing
- Hybrid Example — Setup multi-
subnets with APs
• Network Topology and
Switch Management
Outline — Session 1
• LAN-to-LAN VPN
- Supported Protocol
- Hub and Spokes
- VPN Trunk
• Remote Dial-in VPN
- Smart VPN Client
- SSL VPN
• Load-Balance/Route Policy
3. 3
Outline — Session 2
• High Availability
• User Management
- Customized Login Page Logo
- Create Accounts for Accommodations
• AP Management
- Setup, Configure, and Maintenance
- Management Methods
• WiFi Airtime Fairness
• AP Station Statistics
• Bandwidth Management
4. 4
• LAN-to-LAN VPN
- Supported Protocol
- Hub and Spokes
- VPN Trunk
• Remote Dial-in VPN
- Smart VPN Client
- SSL VPN
• Load-Balance/Route Policy
• Multi WAN
- WAN Types
- Load Balance and Backup
- Triple Play
- WAN Budget
• Multi LAN Subnets / VLAN
- Port-Based
- Tag-Based
- Inter-LAN Routing
- Hybrid Example — Setup multi-
subnets with APs
• Network Topology and
Switch Management
Outline — Session 1
5. 5
• xDSL
- ADSL, ADSL2/2+
- VDSL2
• Ethernet (10/100/1000)
• Fiber
• USB 3G/4G Dongle
Available WAN Interface
6. 6
• xDSL
- ADSL, ADSL2/2+
- VDSL2
• Ethernet (10/100/1000)
• Fiber
• USB 3G/4G Dongle
Available WAN Interface
What if:
• Physical Connection Down
• No Dongle Available
7. 7
• WiFi WAN
(V2860 / V2925)
- Choose Wireless Mode
Available WAN Interface
21. 21
• WAN Type
- VPI/VCI for ADSL
- Tag for VDSL / Ethernet / Fiber
• Port-Based Bridge
- to IPTV Setup Box
• Open WAN Interface
- for IP Phones
• Access Mode
- PPPoE
- DHCP / Static
Triple Play
24. NOS Fibra
➢ Ligar Porta WAN do Router DrayTek (modelo Broadband com porta Ethernet WAN)
directamente a Porta LAN4 do Router/Modem do Operador (ZON HUB), e configurar
campos conforme exemplo em baixo :l
Router/Modem ZON HUB :
Router/Modem ZON HUB :
25. NOS Fibra
Router/Modem ZON HUB :
Router Broadband DrayTek (ex: série Vigor2925,
Vigor2120, Vigro2960, etc) :
27. MEO Fibra (modo Single-Edge)
> apenas acesso a Dados/Internet
➢ Ligar Porta WAN do Router DrayTek (modelo Broadband com porta Ethernet WAN)
directamente ao ONT da MEO e configurar campos conforme exemplo em baixo :l
Router/Modem ZON HUB :
28. MEO Fibra (modo Single-Edge)
> acesso a Dados/Internet + IPTV
➢ Ligar Porta WAN do Router DrayTek (modelo Broadband com porta Ethernet WAN)
directamente ao ONT da MEO e configurar campos conforme exemplo em baixo :l
Router/Modem ZON HUB :
29. MEO Fibra (modo Single-Edge)
> acesso a Dados/Internet + IPTV
➢ Ligar BOX de IPTV numa das portas do Switch do Router DrayTek e configurar conforme
exemplo em baixo :l
Router/Modem ZON HUB :
30. MEO Fibra (modo Single-Edge)
> acesso a Dados/Internet + IPTV + Voz
➢ Ligar Porta WAN do Router DrayTek (modelo Broadband com porta Ethernet WAN) a um
Switch sem Gestão e configurar campos conforme exemplo anterior :
Router/Modem ZON HUB :
31. MEO Fibra (modo Single-Edge)
> acesso a Dados/Internet + IPTV + Voz
➢Ligar Porta WAN do Router DrayTek (modelo Broadband com porta
Ethernet WAN –e- Portas VoIP/FXS) directamente ao ONT da MEO e
configurar campos conforme exemplo em baixo :
Router/Modem ZON HUB :
32. MEO Fibra (modo Single-Edge)
> acesso a Dados/Internet + IPTV + Voz
➢Ligar Porta WAN do Router DrayTek (modelo Broadband com porta
Ethernet WAN –e- Portas VoIP/FXS) directamente ao ONT da MEO e
configurar campos conforme exemplo em baixo :
Router/Modem ZON HUB :
33. Vodafone Fibra
➢ Nota : Huawei HG8247H (Fibra Nova Geração) – só via Duplo-NAT
Router/Modem ZON HUB :
34. Vodafone Fibra
> apenas acesso a Dados/Internet
➢ Ligar Porta WAN do Router DrayTek (modelo Broadband com porta Ethernet WAN)
directamente ao ONT da Vodafone e configurar campos conforme exemplo em baixo :
Router/Modem ZON HUB :
35. Vodafone Fibra
> apenas acesso a Dados/Internet + IPTV + Voz
➢ Ligar Porta WAN do Router DrayTek (modelo Broadband com porta Ethernet WAN –e-
Portas VoIP/FXS) directamente ao ONT da Vodafone e configurar campos conforme
exemplo em baixo :
Router/Modem ZON HUB :
36. Vodafone Fibra
> apenas acesso a Dados/Internet + IPTV + Voz
➢ Ligar Porta WAN do Router DrayTek (modelo Broadband com porta Ethernet WAN –e-
Portas VoIP/FXS) directamente ao ONT da Vodafone e configurar campos conforme
exemplo em baixo :
Router/Modem ZON HUB :
37. Vodafone Fibra
> apenas acesso a Dados/Internet + IPTV + Voz
➢ Ligar Porta WAN do Router DrayTek (modelo Broadband com porta Ethernet WAN –e-
Portas VoIP/FXS) directamente ao ONT da Vodafone e configurar campos conforme
exemplo em baixo :
Router/Modem ZON HUB :
45. 45
Multi LAN Subnets/VLAN
• Tips to Configure Hybrid VLAN
- Reserve P1 for Administrator Management, no tag
- Reserve VLAN0 for other Vigor AP/Switch plug-n-play, no tag
46. 46
• Enable
LAN2 and LAN3
• Enable
Inter-LAN Routing
Multi LAN Subnets/VLAN
47. 47
• A Hybrid Example
- P1 Administrator
- P3 AP with 4 SSID
Multi LAN Subnets/VLAN
62. 62
None/Nice to Have/Must
Host to LAN
PPTP
L2TP
/IPSec
IPSec
SSL
port configurable
PC Android Mac iOS
Must
DrayTek
Smart VPN
Client
DrayTek
Smart VPN
Client
Must Must
68. 68
Configuration Page
• Choose Route
- Interface
- Gateway
• Give Priority
- Higher than Routing Table?
- Higher than other Policies?
69. 69
Configuration Page
• NAT or Routing?
- Regardless of the original LAN type
• Failover to Interface / Policy
• Gradual / Immediate Failback
70. 70
Idea of Priority
• Compare between Routing Table and Route Policies
100
Index Interface
1
2
Src IP Dest IP
WAN2 LAN2 Any
WAN1 LAN2 8.8.8.8
Priority
100
INTERNET
WAN1 WAN2
LAN1
Servers
LAN2
PC
150
200
71. INTERNET
WAN1 WAN2
LAN1
Servers
LAN2
PC 71
Idea of Priority
• Compare between Routing Table and Route Policies
Index Interface
1
2
Src IP Dest IP
3
WAN2 LAN2 Any
WAN1 LAN2 8.8.8.8
Priority
200
150
200
72. INTERNET
WAN1 WAN2
LAN1
Servers
LAN2
PC 72
Idea of Priority
• Compare between Routing Table and Route Policies
Index Interface
1
2
Src IP Dest IP
3
WAN1 LAN2 8.8.8.8
WAN2 LAN2 Any
Priority
200
250
250
73. • Priority First, Sequence Second
73
Idea of Priority
• Compare between Routing Table and Route Policies
74. • Priority First, Sequence Second
- With Same Priority, Sequence Matters
74
Idea of Priority
• Compare between Routing Table and Route Policies
76. 76
• Send SIP Traffic to
the Less-Jitter WAN
Load Balance
77. 77
Route Policy with VPN
• Local Users to Remote Server
- Only Specified LAN IP are eligible to
send traffic via the VPN tunnel
Manager IPTV
INTERNET
VPNTunnel
VPN
TunnelVPN Server
Netflix Server
netflix-380.vo.llnwd.net
Employees