Cube Srl is an engineering firm with more than 10 years of experience in basic and detail engineering. We have developed an high level of expertise in the structural design of industrial steel structures and equipment. We act as a specialized engineering firm for EPC, contractors and manufactures providing basic and detail engineering.
Cube Srl is an engineering firm with more than 10 years of experience in basic and detail engineering. We have developed a high level of experience in the structural design of industrial steel structures and equipment. We act as an specialized engineering firm for EPC, contractors and manufactures providing basic and detail engineering.
Cube Srl is an engineering firm with more than 10 years of experience in basic and detail engineering. We have developed a high level of experience in the structural design of industrial steel structures and equipment. We act as an specialized engineering firm for EPC, contractors and manufactures providing basic and detail engineering.
Bikram Jeet (Achievements from 2006 - 2013)Bikram Jeet
This presentation shows some of the interesting projects snapshots that were completed under my supervision during 2006-2013.
Email: bj@bikramjeet.com
Website: www.bikramjeet.com
working skills :
o Preparation of a 3D PDMS model for all plant areas within the contract Scope,
o The 3D model is showing the plant and the integration into the existing. The
Model includes:
i. Plant co-ordinates and elevations
ii. All equipment items acc. to equipment list.
iii. Clearances for disassembly, maintenance and operation.
iv. Clearances for pipe- and cable runs.
v. Requirements for steel structure (buildings & pipe racks).
vi. Pipe routing for major process piping (main process route).
vii. Equipment Arrangement according the layout standard & safety gaps
viii. The required steel structure Develop and issue isometric drawings including pipe
Supports for construction using 3D Model.
o Preparing complete design of piping general arrangement layouts and key plans using P&ID's and vendor data.
o Design Review for lines, equipment and structure in Navisworks, & PDMS Reviews for completeness (routing feasibility and requirements of process and accessibility).
o Prepare piping Daily & weekly reports.
o Attend hazed kick of meeting
o Follow up tenders
o Attend engineering weekly meetings to review progress & schedule
o Field Technical support.
o Site verification on isometric Drawing & layouts for new lines/tie in's.
o Developing AS BUILT Drawing.
o Testing procedures as applicable to Fabricated Equipment & Piping with knowledge of Isometric drawings and P& ID's
o Prepare transmittal report
And now i am working a piping design engineer at UNEPP
You can find my resume attached below as i will gladly provide any further information may be required
thank you
Best Regards
Mohamed osama
Seismic design of multistoreyed rc building using various codeseSAT Journals
the Reinforced Concrete(RC) structure. The necessity of designing the
structure as per codal provision is must for all kind of structure. In this
for study. The Linear static analysis was done using American, European and Indian Codes. The building is modeled and
analysed using ETABS software. All the required parameters for analysis was taken a
storey deflection, storey drift and base shear were compared. The displacement, storey shear and storey displacement obtained
from ACI code design is more when compared with other code’s analysis result.
Smart deployment of Finite Element Analysis
The TCS engineering department increasingly deploys Finite Element Analysis (FEA) as a method
of optimising the detailed design of steel structures. “FEA is particularly useful in complex projects,
for example calculating irregular-shaped joints,” says TCS Head of Engineering Peter Neven.
KEY FACTS
• TCS increasingly uses Finite Element Analysis
(FEA) in designing steel structures.
• FEA is used typically in smart combination
with hand calculation methods.
• Projects include Canary Wharf Station and the
new giant Stageco performance stage due to
tour this summer.
This presentation will cover pipe support design, 3D modeling, Finite Element Analysis, special stress and thermal cases, along with the unique cases that brought on new pipe support designs. Increase your understanding of the value-added services that are offered by PT&P.
This presentation will cover pipe support design, 3D modeling, Finite Element Analysis, special stress and thermal cases, along with the unique cases that brought on new pipe support designs. Increase your understanding of the value-added services that are offered by PT&P, and rest assured that your Engineering and Design needs can be covered by our 24x7 web-based emergency services, providing field service, and quick-turn around time when you need it most.
Bikram Jeet (Achievements from 2006 - 2013)Bikram Jeet
This presentation shows some of the interesting projects snapshots that were completed under my supervision during 2006-2013.
Email: bj@bikramjeet.com
Website: www.bikramjeet.com
working skills :
o Preparation of a 3D PDMS model for all plant areas within the contract Scope,
o The 3D model is showing the plant and the integration into the existing. The
Model includes:
i. Plant co-ordinates and elevations
ii. All equipment items acc. to equipment list.
iii. Clearances for disassembly, maintenance and operation.
iv. Clearances for pipe- and cable runs.
v. Requirements for steel structure (buildings & pipe racks).
vi. Pipe routing for major process piping (main process route).
vii. Equipment Arrangement according the layout standard & safety gaps
viii. The required steel structure Develop and issue isometric drawings including pipe
Supports for construction using 3D Model.
o Preparing complete design of piping general arrangement layouts and key plans using P&ID's and vendor data.
o Design Review for lines, equipment and structure in Navisworks, & PDMS Reviews for completeness (routing feasibility and requirements of process and accessibility).
o Prepare piping Daily & weekly reports.
o Attend hazed kick of meeting
o Follow up tenders
o Attend engineering weekly meetings to review progress & schedule
o Field Technical support.
o Site verification on isometric Drawing & layouts for new lines/tie in's.
o Developing AS BUILT Drawing.
o Testing procedures as applicable to Fabricated Equipment & Piping with knowledge of Isometric drawings and P& ID's
o Prepare transmittal report
And now i am working a piping design engineer at UNEPP
You can find my resume attached below as i will gladly provide any further information may be required
thank you
Best Regards
Mohamed osama
Seismic design of multistoreyed rc building using various codeseSAT Journals
the Reinforced Concrete(RC) structure. The necessity of designing the
structure as per codal provision is must for all kind of structure. In this
for study. The Linear static analysis was done using American, European and Indian Codes. The building is modeled and
analysed using ETABS software. All the required parameters for analysis was taken a
storey deflection, storey drift and base shear were compared. The displacement, storey shear and storey displacement obtained
from ACI code design is more when compared with other code’s analysis result.
Smart deployment of Finite Element Analysis
The TCS engineering department increasingly deploys Finite Element Analysis (FEA) as a method
of optimising the detailed design of steel structures. “FEA is particularly useful in complex projects,
for example calculating irregular-shaped joints,” says TCS Head of Engineering Peter Neven.
KEY FACTS
• TCS increasingly uses Finite Element Analysis
(FEA) in designing steel structures.
• FEA is used typically in smart combination
with hand calculation methods.
• Projects include Canary Wharf Station and the
new giant Stageco performance stage due to
tour this summer.
This presentation will cover pipe support design, 3D modeling, Finite Element Analysis, special stress and thermal cases, along with the unique cases that brought on new pipe support designs. Increase your understanding of the value-added services that are offered by PT&P.
This presentation will cover pipe support design, 3D modeling, Finite Element Analysis, special stress and thermal cases, along with the unique cases that brought on new pipe support designs. Increase your understanding of the value-added services that are offered by PT&P, and rest assured that your Engineering and Design needs can be covered by our 24x7 web-based emergency services, providing field service, and quick-turn around time when you need it most.
Cube Srl is an engineering firm with more than 10 years of experience in basic and detail engineering. We have developed a high level of experience in the structural design of industrial steel and concrete structures and equipment. We act as an specialized engineering firm for EPC, contractors and manufactures providing basic and detail engineering.
This presentation will cover pipe support design, 3D modeling, Finite Element Analysis, special stress and thermal cases, along with the unique cases that brought on new pipe support designs. Increase your understanding of the value-added services that are offered by PT&P, and rest assured that your Engineering and Design needs can be covered by our 24x7 web-based emergency services, providing field service, and quick-turn around time when you need it most.
This presentation will cover pipe support design, 3D modeling, Finite Element Analysis, special stress and thermal cases, along with the unique cases that brought on new pipe support designs. Increase your understanding of the value-added services that are offered by PT&P, and rest assured that your Engineering and Design needs can be covered by our 24x7 web-based emergency services, providing field service, and quick-turn around time when you need it most. We look forward to having you join us for this complimentary presentation on Engineering and Design of Pipe Supports.
IHB ShipDesign is a Bulgarian design company, member of Industrial Holding Bulgaria (IHB).
Our core business consist of high quality naval and marine design, engineering and consultancy in shipbuilding and marine industry.
Technovision Engineers Pvt. Ltd. Manufacturer & Supplier of a wide range of products which include ABS Coated Pipe such as Stainless Steel Pipe, Conductive Pipe, Slide pipe and Anti static color pipe.
Technovision Engineers Pvt. Ltd. is one of the leading manufacturer of material handling equipment's. The core focus of the company lies in superior quality and excellent customer service. With expertise in the industry and constant innovation in the industry, the company also undertakes turnkey projects with design, manufacturing, supply, erection and commissioning activities. The company is one of the front runners in Lean Manufacturing Solutions in India with an ISO 9001-2008 certification.
We have compiled the most important slides from each speaker's presentation. This year’s compilation, available for free, captures the key insights and contributions shared during the DfMAy 2024 conference.
HEAP SORT ILLUSTRATED WITH HEAPIFY, BUILD HEAP FOR DYNAMIC ARRAYS.
Heap sort is a comparison-based sorting technique based on Binary Heap data structure. It is similar to the selection sort where we first find the minimum element and place the minimum element at the beginning. Repeat the same process for the remaining elements.
Hierarchical Digital Twin of a Naval Power SystemKerry Sado
A hierarchical digital twin of a Naval DC power system has been developed and experimentally verified. Similar to other state-of-the-art digital twins, this technology creates a digital replica of the physical system executed in real-time or faster, which can modify hardware controls. However, its advantage stems from distributing computational efforts by utilizing a hierarchical structure composed of lower-level digital twin blocks and a higher-level system digital twin. Each digital twin block is associated with a physical subsystem of the hardware and communicates with a singular system digital twin, which creates a system-level response. By extracting information from each level of the hierarchy, power system controls of the hardware were reconfigured autonomously. This hierarchical digital twin development offers several advantages over other digital twins, particularly in the field of naval power systems. The hierarchical structure allows for greater computational efficiency and scalability while the ability to autonomously reconfigure hardware controls offers increased flexibility and responsiveness. The hierarchical decomposition and models utilized were well aligned with the physical twin, as indicated by the maximum deviations between the developed digital twin hierarchy and the hardware.
4. BASIC ENGINEERING SERVICES
STEEL STRUCTURES DESIGN
FOUNDATION DESIGN
EQUIPMENT DESIGN
PIPE SUPPORTS DESIGN
o Support structure
o Pipe racks
o Building
o Fired Heaters
o Complex joint FEM verification
o Stacks
o HRSG casing
o Penthouse structures
o Fired Heaters
o WHRU casing
STRESS ANALYSIS
o Power piping
o Process piping
o Power pipe supports
o Process pipe supports
o Shallow foundation
o Deep foundation
o Feasibility studies
o Preliminary design
o 3D Model
o Structural calculation
o Joint calculation and collections
o Customized list materials
o Assembly drawings
5. DETAIL ENGINEERING SERVICES
STEEL STRUCTURES DETAILING
FOUNDATION DETAILING
o 3D Construction model
o 3D As built model
o Customized BOM - MTO
o Customized list materials
o Shop drawings
o CAD/CAM files (e.g: .dstv)
o Construction and assembly drawings
EQUIPMENT DETAILING
PIPE SUPPORTS DETAILING
6. OUR ENGINEERING WORKFLOW
INPUT
3D MODEL PRELIMINARY
OF STEEL MEMBER
3D MODEL FOR
STRUCTURAL ANALYSIS
3D MODEL OF
STEEL CONNECTIONS
3D CONSTRUCTION
MODEL
FABRICATOR
CONSTRUCTION
DETAIL ENGINEERING
TYPICAL OUTPUT
CLIENT
CLIENT
CLIENT
7. SOFTWARES
Structural design:
o Tekla Structures 21.0
o Advance Steel Ver.12
o Tecnometal 4D
o Autodesk AutoCad
o CUBE Tools (Developed for
automation of modelling and detailing
tasks)
Structural analysis:
o SAP2000 Ver. 17.1
o Staad.Pro V8i
o Ansys 16
o CUBE Tools (Developed for
specific calculation and post-
processing tasks)
Piping analysis:
o CAESAR II
10. AC Boilers SpADATE: CLIENT:2015
6th October Power Plant (Egypt).
Combined cycle Add on Project.
Design of HRSG casing, stack and secondary structures
Basic Engineering
Detail Engineering
Structural Design
AISC 360-05 LRFD
STS-1 2011
Fabrication/Erection
Drawings
11. Nooter Eriksen SrlDATE: CLIENT:2015
UMM Al Houl Power IWPP - (Qatar).
Exhaust Stack
Design of steel Stack
Basic Engineering
Structural Design
STS-1-2011
Detail Engineering
Fabrication erection
Drawings
12. Demont SrlDATE: CLIENT:2015
FGA Mirafiori plant - (Italy).
Industrial boiler replacement – EDF Fenice 5.
Design of steel support structure of boiler
Basic Engineering
Detail Engineering
Structural Design
NTC2008
EN 1993-1-3
EN 1993-1-8
Fabrication/Erection
Drawings
13. Nooter Eriksen SrlDATE: CLIENT:2015
Los Minas Power Plant - (Dominican Republic).
CC conversion project.
Design of HRSG casing, stack and secondary structures
Basic Engineering
Detail Engineering
Structural Design
AISC 360-05 LRFD
STS-1 2011
Fabrication/Erection
Drawings
14. Demont SrlDATE: CLIENT:2014
Gas Treatment Unit Complex - (Kazakistan).
Fired Heater H-3600.
Design of fired heaters structures and stress analysis
Basic Engineering
Structural
Design
EN 1993-1-1
EN 1993-1-3
EN 1993-1-6
EN 1993-1-9
EN 1993-3-2
Stress Analysis
ASME B31.3
15. Sofinter SpADATE: CLIENT:2014
Jumbo PET Plant Corpus Cristi Texas - (USA).
3 Titan M Boiler Plug&Play.
Design of air and gas duct system
Basic Engineering
Detail Engineering
3D Model
Basic drawings
Fabrication/Erection
Drawings
16. Balcke Duerr SpADATE: CLIENT:2014
LNG Plant - (Russia).
3 Frame 7E gas turbine.
Design of filter house support structure
Basic Engineering
Structural Design
AISC 360 LRFD
Blast analysis
Detail Engineering
Fabrication/Erection
Drawings
17. Pensotti FCL SpADATE: CLIENT:2014
Terni Biomasse Tozzi Holding - (Italy).
Biomass Power Plant.
Pre-design support structure and design main duct
Basic Engineering
Main duct
Stress analysis
Structural Pre-Design
Detail Engineering
Fabrication/Erection
Drawings for Duct
18. SIME SrlDATE: CLIENT:2014
Crude Oil Pipeline Project - (Abu Dhabi).
Surge relief system skid.
Stress Analysis and design of steel structure
Basic Engineering
Stress analysis
Structural Design
AISC 05 ASD
Detail Engineering
Fabrication/Erection
Drawings
19. Demont SrlDATE: CLIENT:2013
Power Plant ENI Bolgiano- (Italy).
EPC of balance of plant (BOP).
Design of steel structures
Basic Engineering
Structural Design
NTC2008
EN 1993-1-1
EN 1993-1-2
EN 1993-1-8
Detail Engineering
Fabrication erection
Drawings
20. AEN - Projenia SrlDATE: CLIENT:2013
Hassi Messaoud Power Plant - (Algeria).
Civil Engineering.
Design of steel building
Basic Engineering
Structural Design
EN 1992-1-1
EN 1993-1-1
EN 1993-1-2
EN 1993-1-8
Detail Engineering
Fabrication erection
Drawings steel and
concrete structures
21. Grande Meccanica SpADATE: CLIENT:2010
PP Spherizone Plant Daqing - (China).
Multizone circulating reactor (MZCR)
Design of reactor structure
Basic Engineering
Structural Design
ASME VIII Div1
ASME VIII Div2
Fatigue analysis
Nozzle detailed verification
Buckling Analysis