Neeraj Nischal is a structural engineer from India with over 5 years of experience in designing and analyzing steel and concrete structures for oil and gas projects in the UAE. He has worked on projects for ADNOC, ADCO, GASCO and ADMA-OPCO. Some of his responsibilities have included design of pipe racks, platforms, foundations, and conducting structural analysis. He is proficient in various design software like STAAD, SACS, ANSYS. Currently he works as a Structural Engineer at Tebodin Middle East in Abu Dhabi.
As a Land Surveyor With 22 years of experience in the Oil Gas industries in Various countries . Very good knowledge to handle latest Survey instruments in the Industries
As a Land Surveyor With 22 years of experience in the Oil Gas industries in Various countries . Very good knowledge to handle latest Survey instruments in the Industries
working skills :
o Preparation of a 3D PDMS model for all plant areas within the contract Scope,
o The 3D model is showing the plant and the integration into the existing. The
Model includes:
i. Plant co-ordinates and elevations
ii. All equipment items acc. to equipment list.
iii. Clearances for disassembly, maintenance and operation.
iv. Clearances for pipe- and cable runs.
v. Requirements for steel structure (buildings & pipe racks).
vi. Pipe routing for major process piping (main process route).
vii. Equipment Arrangement according the layout standard & safety gaps
viii. The required steel structure Develop and issue isometric drawings including pipe
Supports for construction using 3D Model.
o Preparing complete design of piping general arrangement layouts and key plans using P&ID's and vendor data.
o Design Review for lines, equipment and structure in Navisworks, & PDMS Reviews for completeness (routing feasibility and requirements of process and accessibility).
o Prepare piping Daily & weekly reports.
o Attend hazed kick of meeting
o Follow up tenders
o Attend engineering weekly meetings to review progress & schedule
o Field Technical support.
o Site verification on isometric Drawing & layouts for new lines/tie in's.
o Developing AS BUILT Drawing.
o Testing procedures as applicable to Fabricated Equipment & Piping with knowledge of Isometric drawings and P& ID's
o Prepare transmittal report
And now i am working a piping design engineer at UNEPP
You can find my resume attached below as i will gladly provide any further information may be required
thank you
Best Regards
Mohamed osama
CAD Designer seeking to Transfer Broad Based Skill Set, 10+ Years of Engineering experience. As a results-focused, quality-driven professional with experience in project design; managing multiple projects creating drawings, using AutoCAD 2000 to 2013, Catia V5, Microstation 8vi and solidedge and solidworks following established CAD standards, to create Official Plot Plans with utilities, GPS and all assets on base, having a working knowledge of machining processes including tolerances, surfaces finishes, materials and ASTM standards, interpreting design requirements, specializing in industrial and piping systems, over six years, from pumped systems to drains, able to create and edit P & ID, prepare Bill of Material, arrangement of piping systems, creating parts for steam turbines, to creating asbuilt drawings for telecommunication equipment followed by a long history of demonstrating consistent achievement of objectives, and dedication to organizational goals
Lead Pipeline Engineer (with 25+ years of relevant job experience in FEED, EP...Dr Orhan Degermenci
Summary of experience:
Design, engineering, construction, operation, maintenance and integrity of onshore/offshore pipeline systems (crude oil, refinery products, natural gas and water) and their components (stations, terminals and tank farms) within the scope of different projects (see details below) including Feasibility and Conceptual Design, FEED (Front End Engineering Design), EPC (Engineering, Procurement and Construction), PMC (Project Management Consultancy) and O&M (Operation and Maintenance) services.
Skills (Pipelines):
- Feasibility Studies;
- Conceptual Engineering Design & Management Support;
- Basic Engineering Design & Management Support;
- Front End Engineering Design (FEED) & Management Support;
- Detailed Engineering Design & Management Support;
- Engineering & Management Support for Procurement;
- Engineering & Management Support for Construction & Mechanical Completion
- Engineering & Management Support for Pre-commissioning, Commissioning and Operational Start-up (Project Completion);
- Engineering & Management Support for Performance Testing, Operation and Maintenance;
- Project Management;
- Project Controlling;
- Project Engineering;
- Project Tendering;
- Tender (ITT) Preparation and Tender Evaluation.
Summary of experience:
Design, engineering, construction, operation, maintenance and integrity of onshore/offshore pipeline systems (crude oil, refinery products, natural gas and water) and their components (stations, terminals and tank farms) within the scope of different projects (see details below) including Feasibility and Conceptual Design, FEED (Front End Engineering Design), EPC (Engineering, Procurement and Construction), PMC (Project Management Consultancy) and O&M (Operation and Maintenance) services.
Skills (Pipelines):
- Feasibility Studies;
- Conceptual Engineering Design & Management Support;
- Basic Engineering Design & Management Support;
- Front End Engineering Design (FEED) & Management Support;
- Detailed Engineering Design & Management Support;
- Engineering & Management Support for Procurement;
- Engineering & Management Support for Construction & Mechanical Completion;
- Engineering & Management Support for Pre-commissioning, Commissioning and Operational Start-up (Project Completion);
- Engineering & Management Support for Performance Testing, Operation and Maintenance;
- Project Management;
- Project Controlling;
- Project Engineering;
- Project Tendering;
- Tender (ITT) Preparation and Tender Evaluation.
working skills :
o Preparation of a 3D PDMS model for all plant areas within the contract Scope,
o The 3D model is showing the plant and the integration into the existing. The
Model includes:
i. Plant co-ordinates and elevations
ii. All equipment items acc. to equipment list.
iii. Clearances for disassembly, maintenance and operation.
iv. Clearances for pipe- and cable runs.
v. Requirements for steel structure (buildings & pipe racks).
vi. Pipe routing for major process piping (main process route).
vii. Equipment Arrangement according the layout standard & safety gaps
viii. The required steel structure Develop and issue isometric drawings including pipe
Supports for construction using 3D Model.
o Preparing complete design of piping general arrangement layouts and key plans using P&ID's and vendor data.
o Design Review for lines, equipment and structure in Navisworks, & PDMS Reviews for completeness (routing feasibility and requirements of process and accessibility).
o Prepare piping Daily & weekly reports.
o Attend hazed kick of meeting
o Follow up tenders
o Attend engineering weekly meetings to review progress & schedule
o Field Technical support.
o Site verification on isometric Drawing & layouts for new lines/tie in's.
o Developing AS BUILT Drawing.
o Testing procedures as applicable to Fabricated Equipment & Piping with knowledge of Isometric drawings and P& ID's
o Prepare transmittal report
And now i am working a piping design engineer at UNEPP
You can find my resume attached below as i will gladly provide any further information may be required
thank you
Best Regards
Mohamed osama
CAD Designer seeking to Transfer Broad Based Skill Set, 10+ Years of Engineering experience. As a results-focused, quality-driven professional with experience in project design; managing multiple projects creating drawings, using AutoCAD 2000 to 2013, Catia V5, Microstation 8vi and solidedge and solidworks following established CAD standards, to create Official Plot Plans with utilities, GPS and all assets on base, having a working knowledge of machining processes including tolerances, surfaces finishes, materials and ASTM standards, interpreting design requirements, specializing in industrial and piping systems, over six years, from pumped systems to drains, able to create and edit P & ID, prepare Bill of Material, arrangement of piping systems, creating parts for steam turbines, to creating asbuilt drawings for telecommunication equipment followed by a long history of demonstrating consistent achievement of objectives, and dedication to organizational goals
Lead Pipeline Engineer (with 25+ years of relevant job experience in FEED, EP...Dr Orhan Degermenci
Summary of experience:
Design, engineering, construction, operation, maintenance and integrity of onshore/offshore pipeline systems (crude oil, refinery products, natural gas and water) and their components (stations, terminals and tank farms) within the scope of different projects (see details below) including Feasibility and Conceptual Design, FEED (Front End Engineering Design), EPC (Engineering, Procurement and Construction), PMC (Project Management Consultancy) and O&M (Operation and Maintenance) services.
Skills (Pipelines):
- Feasibility Studies;
- Conceptual Engineering Design & Management Support;
- Basic Engineering Design & Management Support;
- Front End Engineering Design (FEED) & Management Support;
- Detailed Engineering Design & Management Support;
- Engineering & Management Support for Procurement;
- Engineering & Management Support for Construction & Mechanical Completion
- Engineering & Management Support for Pre-commissioning, Commissioning and Operational Start-up (Project Completion);
- Engineering & Management Support for Performance Testing, Operation and Maintenance;
- Project Management;
- Project Controlling;
- Project Engineering;
- Project Tendering;
- Tender (ITT) Preparation and Tender Evaluation.
Summary of experience:
Design, engineering, construction, operation, maintenance and integrity of onshore/offshore pipeline systems (crude oil, refinery products, natural gas and water) and their components (stations, terminals and tank farms) within the scope of different projects (see details below) including Feasibility and Conceptual Design, FEED (Front End Engineering Design), EPC (Engineering, Procurement and Construction), PMC (Project Management Consultancy) and O&M (Operation and Maintenance) services.
Skills (Pipelines):
- Feasibility Studies;
- Conceptual Engineering Design & Management Support;
- Basic Engineering Design & Management Support;
- Front End Engineering Design (FEED) & Management Support;
- Detailed Engineering Design & Management Support;
- Engineering & Management Support for Procurement;
- Engineering & Management Support for Construction & Mechanical Completion;
- Engineering & Management Support for Pre-commissioning, Commissioning and Operational Start-up (Project Completion);
- Engineering & Management Support for Performance Testing, Operation and Maintenance;
- Project Management;
- Project Controlling;
- Project Engineering;
- Project Tendering;
- Tender (ITT) Preparation and Tender Evaluation.
RAMASAMY (NACE CERTIFIED CP LEVEL II ENGINEER)RAMA SAMY
Electrical Engineer with around 7 years’ experience in Site Management and QA/QC activities in the field of Cathodic Protection of Oil and Gas Pipeline in On- shore, Off- shore & Well head .
Electrical Engineer with around 6.8 years’ experience in Site Management and QA/QC activities in the field of Cathodic Protection of Oil and Gas Pipeline in On- shore, Off- shore & Well head .
Monitoring and Maintanance of On-shore pipeline ,Off shore pipeline ,Well jacket structure ,Jetty,Platform and storage tanks for the client of BRUNEI SHELL PETROLEUM
1. NEERAJ NISCHAL
STRUCTURALENGINEER Nationality:Indian
Email:neeraj.nischal08@gmail.com Mob.:+971569239434
Examination University Institute Year CGPA/ %
Graduation IITBombay IITBombay 2013 7.38/10
KEYQUALIFICATIONS
STRUCTURALENGINEERING
Experiencein following aspectsof StructuralEngineering
Designand analysis of steel/concrete structuressuchas platforms, Buildings, pipe racks,pipe supports,
sheds, buildings, pits andfoundations forstudy,FEED and EPC projects
Designof fixedoffshore steel structures –In place,Fatigue,pushover,pre-service,boatimpact,and
blastanalysisusingSACS for conceptual study,FEED and detail engineeringprojects
Finite element analysis (FEA) of pipe support shoes and saddles using ANSYS
Working knowledge of design codes such as BS 5950, BS 8110, AISC 360, ASCE 7, API RP 2A/2SIM
Software known – STAAD.Pro, SACS, ANSYS, ETABS, MAT 3D, Foundation 3D, AutoCAD, MathCad
Review of drawings and MTOs/BOQs
Technical and commercial proposals for high net worth projects with major UAE clients
PROFESSIONALEXPERIENCE
TEBODINMIDDLE EASTLTD.,AbuDhabi,UAE [Nov’13- Present]
StructuralEngineer
ADNOC-MASDAR:EPC of ESI carbon capture facilityandpipelineproject
Scope ofWork:
Capture and treatment of CO2 from Emirates Steel Industry (ESI) in Abu Dhabi and its transportation to
ADNOCreservoirsforenhancedoil recovery(EOR)
Planning, construction and operation of CO2 dehydration and compression facility (CCF) as well
as transportationof CO2 fromESI-1 and ESI-2to CCF
Responsibilities:
Conceptualization and detail design of 3 pipe rack super structures and theirfoundations; supporting air
coolerequipmentwithaccessareas, connectionsandmultiplepipe supports
Detail designof RCElectrical substation-switchgearBuildingwithtransformersupportfoundations
Detail analysisanddesignof raftfoundationforCompressorhouse usingSTAAD.Pro
Analysisanddetail designof 10mhighpipe supportsforsupportingpipeline transportingCO2 fromESI
Review andcheckingof drawings, co-ordinationwithTebodinMumbai forvariousdeliverables
ADCO: EPC forAL DABB’IYA surface facilities-Phase III
Scope of Work:
Increasingproductionbyanadditional 73 MBOPD to achieve atotal Dabb’iyaProductionof 145 MBOPD
by year2018 by drilling114 wellswhichinclude 59oil producersand55 injectors
Newclusters/gatheringstationsforproductionandinjection,gasprocessingtrains adjacenttoexisting
CPPfacilities,Oiland Gas exportpipelines,Field gatheringandexport/importnetworksetc.
Responsibilities:
Studyand verificationof FEED stage documentsand drawings
Designand analysisof steel platformsandtheirfoundations
Classification,designandanalysesof pipe supports,sleepersandpitsfor22 clusters
Designand analysisof crane foundations
Preparationand checkingof steel and concrete detail drawings
ADCO: EPC for tie-inworksatsoutheast - Package A
Scope of Work:
Conversionof existingOil ProducerstoGasLift WellsandTie-inthemtothe LiftGas Flow linesor
existing/newManifoldsinrespectiveRDSs(27 Nos.),Tie-inandConversionof existingWIwellsinto
PWRI wells(6Nos.),Tie-inandConversion of existingWIwellsintoWAGwells(18Nos.),Supplyand
Installationof newMulti SelectorManifoldsinexistingRDSsnamelyRDS-1(1Nos.),RDS-3(2 Nos.) and
RDS-4 (2 Nos.),SupplyandInstallationof Chemical InjectionPackages(7Nos.) inAL-ASABField
Tie-in of new WAG wells (4 Nos.) in SAHIL field
2. Responsibilities:
Designand analysisof civil and structural supportstructures such as access platforms,crossover
platforms,solarpanel support platforms,chemical injectionpackage supportstructure,manifold
supportstructure and instrumentationsupportstructures
Preparationand checkingof steel and concrete drawings
GASCO:Consultancyservicesforadequacycheckof existingPipeRacksandStructures(forproposedBPST)
at train 3 & 4 of RuwaisPlant
Scope of Work:
Determine andevaluateadequacyof existingplatformstructuresandpiperacksforproposedBPSTproject
Recommend suitable modifications wherever required, for steel structures and foundations so that
new pipelinesandequipmentcanbe accommodated
Responsibilities:
Studyand verificationof suppliedSTAAD.Promodelswithasbuiltdrawingsfor all the structures
Structural integrity,adequacychecksfor steel structures,foundationsandotherstructural components
Recommendedmodificationsinline withnew loadsandlatestGASCOdesignstandards
ADMA-OPCO:EPC worksforZK fieldWHT'selectrificationZWSC/ZCSCtopsideelectrical workspackage - "A"
Scope of Work:
ZWSC BST-S1:Design,analysisandinstallationof new deckonexistingjacketsto accommodate
containerizedelectrical substationandothersupportequipment
ZCSC PGP and UP: Analysisof PGP andUP fornew containerizedsubstationandelectrical equipment
Responsibilities:
Study and verificationof FEED stage documentsand drawings,SACSmodel and environmental data
ConceptualizationandSACSmodelingof new topside andcontainerizedsubstation
Dynamic analysistocalculate natural frequenciesandmode shapesof all the platforms
Pre service analysis,consistingof liftandtransportation of new BST-S1 topside andsubstation
Environmental pushoveranalysisof BST-S1platformto calculate reserve strengthratios
Global and Local Inplace analysis of all 3 platformswithreview andchecking of detaileddrawings
Reviewof documentsanddrawingspreparedby sub-contractors
BUNDUQ: LQP expansionstudy
Scope of Work:
Studyto increase POBcapacity of BunduqLQP platformin El Bunduqfieldfrom119 to 180
Studyto propose locationand detailsforinstallationof new LQPplatformor Jack up Barge
Cost estimationforthe installationof new LQP platformand jack up barge
Responsibilities:
Collaborationwitharchitectto identifyspace fornew modulesviarearrangementof existingfacilities
and/or deckextension
Global and local inplace analysisof LQP aftermodification
Studyof alternate barge arrangementfor livingquarterstoverifyspace and utilitiesrequirement
Studyof locationfor separate LQP platformin the vicinityof the existingLQP
PreliminaryDesignof jacket,pile,topside andcorrespondingdrawings fornew LQP
Cost estimationforinstallingnewLQP andleasingof secondhandjack upbarges
ADMA-OPCO:TSR and cinemahall refurbishmentprojectatUSSC
Scope of Work:
Detail Engineeringformodificationof CinemaHall-USAAPandMessHall- USEAPforTSR requirements
Responsibilities:
IdentifyTSRrequirementsaspercodes andcoordinate withArchitecture andHSEforlayoutpreparation
Local analysisof extensions/modificationsonUSEAP,USAAPand global preliminarycheckforpiles
Adequacycheckof existingdeckplate andbulkheadsdue tonew loads
Blastadequacycheckfor exposed wall andwindows
LEADERSHIPEXPERIENCE
ACTIVITY COMMITTEE MEMBER |Tebodin,AbuDhabi
Elected representativeof discipline for organizing monthly employeeinteraction programme
Plannedandorganizedannual office party with budgetof AED 150,000