Raja K has over 4 years of experience as a mechanical engineer and Tekla Structures modeler and detailer. He has expertise in modeling, detailing, fabrication, and site erection of steel structures using Tekla Structures and AutoCAD. Some of his responsibilities include modeling various structural elements, preparing fabrication drawings, material take-offs, and managing technical queries from contractors. He has a diploma in mechanical engineering and has worked on projects in the UAE and India.
JDs of Piping Engineer
1. Review of Bid documents, scope of work & client specification to kick off the project.
2 Designing of complete Skid mounted modular packages for complete EPCC Job as per Project Specifications and applicable codes and standards
3 Review of vendor documents to make sure compliance of Client Specifications and applicable codes & standards e.g. data /cut sheets of manual valves/instruments etc.
4. Preparation of package data sheets, reflecting all technical & vendor data for Client submission.
5. Leading and assigning piping tasks to team of design engineers & draftsmen.
6. Dealing with vendors to transmit technical requirements and closing of vendor’s TQ(s) specially piping material including valves, rupture discs, strainers, isolation kits etc.
7. Coordination with Client for approval for vendor data
8. 3D Modeling of the skids as per PID, project specifications, applicable codes (B31.3, API & ASME) and good industrial practices(PIPs).
9. Design Calculation for skid mounted modular packages and incorporation of changes in 3-D Model (if any) based on process requirements.
10. Issuing complete MTO(s) and MR(s) for entire modular packages.
11. Follow Up with Engineering Team for all Engineering Deliverables as per Project Specifications.
12. Follow up with engineering and fabrication team to meet the project schedule.
13. Piping Layout Drawings, Top View Equipment Layouts & Piping General Arrangement Drawings.
14. Making sure issuance of Piping Fabrication Drawings (Isometrics) with respect to correct rating, schedule and material.
15. Stress analysis based on project specifications and ASME B31.3.
16. Modify and revise designs to correct operating deficiencies or to reduce production problems.
17. Modification drawings of revamp project(s)
18. As building of Modular Packages.
19 Pre Commissioning Activities at Nigeria Site. Mechanically Hand Over of Skid Packages to Commissioning Team.
JDs of Piping Engineer
1. Review of Bid documents, scope of work & client specification to kick off the project.
2 Designing of complete Skid mounted modular packages for complete EPCC Job as per Project Specifications and applicable codes and standards
3 Review of vendor documents to make sure compliance of Client Specifications and applicable codes & standards e.g. data /cut sheets of manual valves/instruments etc.
4. Preparation of package data sheets, reflecting all technical & vendor data for Client submission.
5. Leading and assigning piping tasks to team of design engineers & draftsmen.
6. Dealing with vendors to transmit technical requirements and closing of vendor’s TQ(s) specially piping material including valves, rupture discs, strainers, isolation kits etc.
7. Coordination with Client for approval for vendor data
8. 3D Modeling of the skids as per PID, project specifications, applicable codes (B31.3, API & ASME) and good industrial practices(PIPs).
9. Design Calculation for skid mounted modular packages and incorporation of changes in 3-D Model (if any) based on process requirements.
10. Issuing complete MTO(s) and MR(s) for entire modular packages.
11. Follow Up with Engineering Team for all Engineering Deliverables as per Project Specifications.
12. Follow up with engineering and fabrication team to meet the project schedule.
13. Piping Layout Drawings, Top View Equipment Layouts & Piping General Arrangement Drawings.
14. Making sure issuance of Piping Fabrication Drawings (Isometrics) with respect to correct rating, schedule and material.
15. Stress analysis based on project specifications and ASME B31.3.
16. Modify and revise designs to correct operating deficiencies or to reduce production problems.
17. Modification drawings of revamp project(s)
18. As building of Modular Packages.
19 Pre Commissioning Activities at Nigeria Site. Mechanically Hand Over of Skid Packages to Commissioning Team.
Dear Sir/Madam,
I am Anas M. H, a Mechanical Engineer by qualification working in Cochin Shipyard Limited INDIA as Piping Engineer. I have more than 6 years of experience in Ship Building & Ship Repair.I had 3 months work Experience in DRYDOCKS WORLD DUBAI.Due to some health problems,I resigned from there..
I am looking forward to the next challenge that draws on my professional experience. Attached herewith is my resume for your kind reference. If my qualification and experience suits for any vacancy in your reputed organization, kindly arrange for a face to face or phone in interview.
Looking forward to hear from you soon in this regard.
Thanks & Best regards,
Anas M. H
Skype ID: anasmanganattu1@skype.com
INDIA:+919747265577,+919037066990
Dear Sir/Madam,
I am Anas M. H, a Mechanical Engineer by qualification working in Cochin Shipyard Limited INDIA as Piping Engineer. I have more than 6 years of experience in Ship Building & Ship Repair.I had 3 months work Experience in DRYDOCKS WORLD DUBAI.Due to some health problems,I resigned from there..
I am looking forward to the next challenge that draws on my professional experience. Attached herewith is my resume for your kind reference. If my qualification and experience suits for any vacancy in your reputed organization, kindly arrange for a face to face or phone in interview.
Looking forward to hear from you soon in this regard.
Thanks & Best regards,
Anas M. H
Skype ID: anasmanganattu1@skype.com
INDIA:+919747265577,+919037066990
Sikh Ardaas depicts sikh histroy and sikh philosphy. In this powerpoint, we are presenting, the description of first para of Sikh Ardaas. It also explains meaning and importance of ardaas(prayer) in general
1. RAJA. K
MECHANICAL ENGINEER & TEKLA STRUCTURES (MODELLER & DETAILER)
U.A.E: + 971 558384955 & 557375633 / IND: + 91 7402647402.
raja.try2014@gmail.com
__________________________________________________________________________________
SUMMARY
I have more than 4 years experience in Structural Steel Design filed as Modeller, Detailer and Checker. All types of
Fabrication work & Site Erection work. Here am point out my strength and experience details briefly.
My Strength are
Modelling and Detailing of steel structures and equipment using Tekla Structures and Autocad.
Modelling and Detailing using Tekla structures for steel building. Preparation of fabrication Part drawings,
Assembly drawings and Erection drawings using Tekla structure.
Modelling and Detailing of all types of Steel structural, all types of Duct and Welded beams, columns, Ladder,
Supporting structures, Bolted & Welded connection, Pipe etc. using Tekla structures.
Cutting plan list, material list, part list, bolt list and weight calculation list all Preparing Tekla structures .
Making bill of material (BOM).
I have good knowledge in all types of Fabrication work and Welding Inspection works.
I have good knowledge in Site Erection work.
Managing technical queries from site team and contractors.
Basic knowledge of C3.NET (visual studio).Developed API (Application Program Interface) for Venturimeter
Duct.
Self-motivated, quick learner and adaptive to new and challenging environments.
EDUCATIONAL QUALIFICATION
• DIPLOMA IN MECHANICAL ENGINEERING PERCENTAGE: 88.5
Government Polytechnic College, Trichy, Dote. April 2013
• SSLC PERCENTAGE: 89.2
St Mary’s High School, Trichy, State Board. April 2010
WORK EXPERIENCE
1. Presently working as Mechanical Engineer & Tekla Structures (Modeler & Detailer)
of engineering division in Al Fajer Decoration L.L.C (Al Fajer Groups) Dubai, UAE. (Apr 2016 to Till Now)
Al Fajer Group Dubai, United Arab Emirates is a nationally owned holding company established in 1970 by
Sheikh Hasher bin Maktoum Al Maktoum of Dubai's ruling family.
Responsibilities:
Modelling and Detailing of steel structures and equipment using Tekla Structures and AutoCAD.
Modelling and Detailing using Tekla structures for steel building. Preparation of fabrication Part drawings,
Assembly drawings and Erection drawings using Tekla structure.
Cutting plan list, material list, part list, bolt list and weight calculation list all Preparing Tekla structures .
Modelling and Detailing of all types of Steel structural, all types of Duct and Welded beams, columns, Ladder,
Supporting structures, Bolted & Welded connection, Pipe etc. using Tekla structures.
Detailed Fabrication drawings to be made with accuracy so that fabrication works has to go flow.
As Built drawings to be prepared as per the site conditions.
Fabrication workshop in charge & material and welding inspection.
Site erection work follow.
Involved in Design and Detail engineering activities including Modelling, Detailing Drawing
Generation, Fabrication & Site Erection for the following Clients :
Modeling & Detailing
Drawing GenerationTekla
Structures and Fabrication
& Site Erection work.
2. PROJECTS HANDLED
“ASHJAR & SEVENTH HEAVEN”- AL BARARI
C(G+4) & A(G+4) floor of residential apartments. Each floor is surrounded by GRP pergola with a support of Fly
beams. Fabrication drawings prepared as per consultant design with Clod form & hot rolls using camber, welding
specifications and all other details which need f
Different types of connection model. Cutting plan list, material list, part list, bolt list and weight calculation list
all Preparing Tekla structures .
“GROUP COMPANY” - Sign board and
use Tekla structures.
Welded beam, ladder ,columns , box channel ,
2. Previously employed as a Technical Apprentice Trainee
division of fossil boiler in Bharat Heavy Electrical Limited (BHEL)
Bharat Heavy Electricals Limited (BHEL) owned by the Government of India, is
an engineering and manufacturing company based in
power plant equipment manufacturer.
Acquired technical expertise in different domains such as
Modelling various duct routing, placing duct supports and duct internals using
checking using PDMS.
Extraction of duct arrangement and detail
Detailing Of Hot Air and Cold Air Duct and its Supports, Expansion Joint, Steel Floor and its Grating, ladder, Stairs,
Exhaust Air Chimney, Cooling Tower, different bracing support Cone, Chute,
Supports, Connection details etc.,
Uploading BOM data, verification and validation of Group Manufacturing Specifications (
sheets and creation of design change note in
Drafting and annotating in AutoCAD.
Knowledge of C#.NET (Visual Studio).
Developed API (Application Program Interface) for
Involved in Design and Detail engineering activities including
Generation and GMS release in SAP for the followin
PROJECTS HANDLED
Modelling of Duct Supports, Routing o
various types of routing, modelling of
• ESP TO ID FAN DUCT (Electro Static Precipitator to Induced draft Fan)
• BOF TO ESP DUCT (Boiler Outlet Flange to Electro Static Precipitator)
• ID FAN TO CHIMNEY DUCT(Induced Draft Fan to Chimney)
• SOFA DUCT (Separated Over Fire Air) -
• Checking of anchor bolt foundation plan for main steel structure, equipment’s and boiler accessories
• Checking of General Arrangement drawing (Erection Drawing) of Structural Members with erection feasibility.
• Checking of Fabrication Drawing for Support s
ENNORE
TAMILNADU
2X660 MW
AL BARARI (TERRAZZO & SB) - Ten building Six blocks of
floor of residential apartments. Each floor is surrounded by GRP pergola with a support of Fly
Fabrication drawings prepared as per consultant design with Clod form & hot rolls using camber, welding
specifications and all other details which need for fabrication.
Different types of connection model. Cutting plan list, material list, part list, bolt list and weight calculation list
and Single slope (SS) PEB steel Building. Fabrication and
box channel ,supports etc.,
Technical Apprentice Trainee (Mechanical Engineer & Tekla Structures)
Electrical Limited (BHEL), Trichy. (Mar 2015 to Apr 2016)
) owned by the Government of India, is
company based in New Delhi, India. Established in 1964, BHEL is India's largest
Acquired technical expertise in different domains such as
various duct routing, placing duct supports and duct internals using Tekla Structures and clash
etail Drawings using Tekla Structures.
Detailing Of Hot Air and Cold Air Duct and its Supports, Expansion Joint, Steel Floor and its Grating, ladder, Stairs,
Exhaust Air Chimney, Cooling Tower, different bracing support Cone, Chute, Columns, Beams and vari
data, verification and validation of Group Manufacturing Specifications (GMS
sheets and creation of design change note in SAP.
(Application Program Interface) for VENTURIMETER DUCT.
engineering activities including Modelling, Detailing Drawing
for the following Clients :
s, Routing of Ducts, Detailing Drawing generation & Clash Checking
modelling of ducts & supports.
(Electro Static Precipitator to Induced draft Fan) - WANAKBORI 1X800 MW
(Boiler Outlet Flange to Electro Static Precipitator) - KOTHAGUDAM 1X800 MW.
(Induced Draft Fan to Chimney) - ENNORE TANGEDCO2X660 MW.
- ENNORE TANGEDCO2X660 MW.
foundation plan for main steel structure, equipment’s and boiler accessories
Checking of General Arrangement drawing (Erection Drawing) of Structural Members with erection feasibility.
Checking of Fabrication Drawing for Support steel Structures.
KOTHAGUDAM
TELANGANA
1X800 MW
WANAKBORI
GUJARAT
1X800 MW
ix blocks of A(G+5),
floor of residential apartments. Each floor is surrounded by GRP pergola with a support of Fly
Fabrication drawings prepared as per consultant design with Clod form & hot rolls using camber, welding
Different types of connection model. Cutting plan list, material list, part list, bolt list and weight calculation list
and erection of drawing
(Mechanical Engineer & Tekla Structures) of ducts
Mar 2015 to Apr 2016)
, BHEL is India's largest
and clash
Detailing Of Hot Air and Cold Air Duct and its Supports, Expansion Joint, Steel Floor and its Grating, ladder, Stairs,
Columns, Beams and various Duct
GMS), shipping list, index
Drawing
Clash Checking
1X800 MW.
KOTHAGUDAM 1X800 MW.
2X660 MW.
foundation plan for main steel structure, equipment’s and boiler accessories.
Checking of General Arrangement drawing (Erection Drawing) of Structural Members with erection feasibility.
WANAKBORI
3. CERTIFICATIONS
Participated in TEKLA INDIA BIM AWARDS 2015
Power plant boiler ducting system.
Best of use Tekla Structures BHEL certificate.
Prepared a User Manual for Tekla STRUCTURES 18.0
Standardisation And Automation of Venturimeter Model in Tekla Structures Using C#.Net
• Standardised the design logics governing of
Venturimeter ducting system in Tekla Structures using
3.Previously employed as a Mechanical Engineer
(Fabrication Erection Engineers) Tanjore. (BHEL
JOBS RESPONSIBILITY
ADDITIONAL QUALIFICATION
Undergone training in Arc Welding and Gas Cutting, Grinding, Drilling, Lathe, Milling, Shaping
machine operation and working BHEL Sub Vendor Company, Trichy.
ACADEMIC PROJECT UNDERTAKEN.
Automatic Welding Slag Cleaning and Correction Removing Machine.
Project Done In Ujainee Industries. Tanjore
PROFESSIONAL DEVELOPMENT
Undergone internship at APOLLO TYRES (P) LTD
Undergone internship at BHEL Sub vendor
PERSONAL DETAILS
Father’s Name : Kannan.K (Late)
Mother’s Name : Padhmavathy.K
Date of Birth : 20 Oct 1994
Passport Number : L 8705891
Languages Known : Tamil , English
Declaration
I hereby declare that the above particulars are true and correct to the best of my knowledge.
Place:
Date :
PRODUCTION &
MATERIAL PLANNING
Supervision Of Man Power And
Contract Labours
Ensure To Right Proucts To
Clients Despatch At Time
Purchase Materials As Per The
Requirements Of Clients.
Raw Material Inspection,allocating
the raw material to the contracts.
QUALITY CONTROL
TEKLA INDIA BIM AWARDS 2015 for ENNORE TANGEDCO 2X660MW
Best of use Tekla Structures BHEL certificate.
STRUCTURES 18.0 for BHEL USE.
Standardisation And Automation of Venturimeter Model in Tekla Structures Using C#.Net
Standardised the design logics governing of Venturimeter ducting system and automation of the
ducting system in Tekla Structures using Visual Studio.
Mechanical Engineer in MGB ENGG. WORKS
BHEL Sub Vendor). (Apr 2013 to Mar 2015)
Arc Welding and Gas Cutting, Grinding, Drilling, Lathe, Milling, Shaping
machine operation and working BHEL Sub Vendor Company, Trichy.
ACADEMIC PROJECT UNDERTAKEN.
Correction Removing Machine.
. Tanjore. –BHEL Sub Vendor.
PROFESSIONAL DEVELOPMENT
APOLLO TYRES (P) LTD, Limda Plant, Vadodara, Gujarath. – 6 Month.
BHEL Sub vendor company visit.
Late)
Padhmavathy.K (Late)
English & Hindi (Little).
particulars are true and correct to the best of my knowledge.
Thanking you
Yours Truthfully
Date : (RAJA K)
QUALITY CONTROL
Welding and Painting
Inspection
Doing Various Ndt
Activities, Final
Inspection
Analysing The Root
Cause Of The Problems
And Troublwe Shooting
Co-ordinate with clients
and third party
inspections.
DRAFTSMAN
After Reading Of
Clients Drawing
Giving
Instructions To
The Labours
Carried Out The
Changes In Clients
Drawings With
Clients Approval.
2X660MW about
ducting system and automation of the
(Apr 2013 to Mar 2015).
Arc Welding and Gas Cutting, Grinding, Drilling, Lathe, Milling, Shaping, all type
ACADEMIC PROJECT UNDERTAKEN.
6 Month.
particulars are true and correct to the best of my knowledge.
Yours Truthfully
(RAJA K)
CLIENTS