Tyron Muller is a South African civil engineer with over 8 years of experience in structural design, project management, and construction management. He holds a BSc in Civil Engineering from the University of the Witwatersrand. Some of his project experience includes designing structures and infrastructure for power plants, mines, and transportation. He is proficient in various engineering software and currently works as a qualified civil engineer at Resonant Environmental Technologies.

1. TYRON MULLER
PERSONAL PARTICULARS
Cell number : +27 76 280 6831
Email address : tyronmuller89@gmail.com
Date of birth : 1989/07/31
Nationality : South African
EDUCATION
University of the Witwatersrand, South Africa (2008 – 2012)
 Bachelor of Science in Civil Engineering (BSc. Eng)
 Majors in Construction Materials, Geotechnical engineering, Hydraulic engineering, Structural
engineering, Reinforced concrete design, Structural Steel design and Environmental engineering.
AFFILIATIONS
Registered with the Engineering Council of South Africa (ECSA) as a candidate engineer (registration
number: 201550188)
PROFESSIONAL/TECHINCAL SKILLS
- Generating detailed designs / manufacturing drawings on AutoCAD 2D and 3D (IronCAD).
- Analysis of structures using Prokon Analysis Software
- Finite Element Analysis (static).
- Determination of structural loadings.
- Knowledge of relevant codes of practice, both national and international.
- Report writing using MS Word
- Three dimensional modelling.
- Preparation of construction cost estimates using MS Excel
- Preparation of Bill of Quantities using MS Excel
- Preparation of works information
- Proficient in Delphi and Matlab programming
EMPLOYMENT HISTORY
January 2013 – Present: Resonant Environmental Technologies (As a qualified Civil Engineer)
Mogale Alloys, South Africa | Alloy refining and granulation plant Civil and Structural Works contract
(Client: Asenza CC)
- Lead Engineer for Civil Design Works
 Design of earth retaining walls
 Design of reinforced concrete service road
 Hydraulic design of culverts and drainage channels
 Detailed report writing
 Bill of materials compilation
 Production of AutoCAD 2D manufacturing drawings

2. Assmang Chrome Machadodorp, South Africa | Civil works for the detailed design of a dust extraction
system for a crushing and screening plant
- Assistant Engineer for Civil Design Works
 Reinforced concrete foundation design (Flat slabs and padd footings)
 AutoCAD 2D drawing production
 Bill of Materials compilation
Arnot Power Station, South Africa | Seepage and slope stability remediation report (Client: Eskom)
- Lead Engineer
 Geotechnical slope stability analysis
 One in fifty year hydrological storm water runoff calculation
 Design of a new compound channel system to cater for the aforementioned peak discharge
 Detailed report writing
 Compilation of project cost estimate
Johnson Matthey (Germiston), South Africa | Design and construct project
- Assistant Design Engineer for Civil & Structural works
 Design of reinforced concrete slabs for transformers (Strip footings)
 Design of structural steel bridge (Truss configuration)
 Bill of quantities
 Construction cost estimate
 Production of AutoCAD 2D manufacturing drawings
Duvha Power Station South Africa | New Penstock Structure at Ash Dam 1 (Client: Eskom)
- Project 1 – Lead Design Engineer
 Water balance calculation to quantify the inlet discharge into the penstock
 Hydraulic calculations to size the vertical and horizontal penstock tower’s for the design discharge
 Structural design of the horizontal and vertical penstock
 Reinforced concrete design of the penstock foundation
 Detailed drawings of the reinforced concrete and steel components using AutoCAD 2D
 Reinforcing and bending schedule details
 Setting up of the BOQ (Bill of quantities)
 Detailed design report
Project 2 – Lead Design Engineer
 Detailed design of structural steel access platforms

3. Kusile Power Station, South Africa | Construction of a new coal fired power plant (Client: SGB Cape)
- Consulting Engineer for Structural Inspections
 Design and certification of material loading access scaffolds used during the construction of Kusile
Power Station (On-going project)
Grootvlei Power Station, South Africa | Conversion from an electrostatic precipitator plant to a fabric
filter plant (Client: Actom)
- Project 1 – Lead Civil Engineer for design works and project coordinator for the implementation
thereof
 Tower crane reinforced concrete foundation designs
 Conducted a detailed rigging study to certify the procedure required for a concrete demolition to
be carried out on the penthouse of an electrostatic precipitator plant, units 2-4.
 Supervising the demolition to ensure the correct rigging procedure was followed based on the
detailed rigging study.
 Managing a group of contractors carrying out the demolition work
 Carrying out surveying works to determine accurate levels and positioning of the filter plant
 Plant commissioning
- Project 2 – Lead Engineer
 Structural steel design of access platforms
 Design of structural steel crawl beams used to remove ID fans for periodic maintenance.
Geecom, South Africa | Structural Steel Workshop Extension
- Lead Engineer responsible for Civil and Structural Work Designs
 Detailed structural and civil design of a steel workshop extension required at Geecom Laser Park,
South Africa.
 DCP testing
 Report compilation
 Construction cost estimate
November 2009 - February 2010: Murray and Roberts Construction (As a student Civil Engineer)
Sandton Gautrain Station, South Africa | Construction of a Rapid Railway Transport System
 Inspection of reinforced concrete structures and the handing over thereof
 Site surveying, materials handling and drawing reviews
AWARDS:
- Bursary with TFM industries (2008)
- Full Bursary with Resonant Environmental Technologies (2012)
Supporting qualification documents and references are available on request.