Construction supervisor

SHAMSHER ALAM ANSARI CONSTRUCTION SUPERVISOR(PIPING)
Permanent Address :
GREEN VALLEY ROAD NO 17
P.O. - AZAD NAGAR MANGO JSR
Distt.-.EAST SINGHBHUM 832110 E-Mail - manauwwar_jsr@yahoo.co.in
Cell-+918538999843,+918877344485 shamsherskec@gmail.com
Objectives:
Career objectives focus on application of experience to new areas of challenge, increasing exposures
technology & business practice. Oil and gas work experience allied to technical & communication strength
utilize to excellent advantage on a range of project development assignments worldwide challenging career
where I can contribute my competencies in oil and gas field.
Professional Experience:
Approximately 9 yrs experience as, PIPING and conforming the international standards for, piping
materials, fabrications, testing, pre commissioning and commissioning. Technical review of construction
documents like construction procedures & work instructions in quality point of view and approving them
when comply with codes, international standards and company specific requirements. Providing important
technical inputs to the engineering drawings in regard of weld joints design and detailing. Coordination with
all execution and related departments for qualification of WPS and Welders related to petrochemical project
Educational Qualification:
Passed in Matriculation from J.S.E.B. Ranchi in 2001.
Technical Qualification:
Diploma in Mechanical Engineering with first class in 2004.
Experience in following Fields:
1. Piping
2. Pressure vessel
3. Low Pressure and Atmospheric Tanks
4. Structure
Various engineering standard on which I gained my experience are given as follows:
ASME B 31.3 - Process Piping (Construction of Oil and gas station/chemical plants).
ASME B SEC IX - Qualification of Welding procedures & Welders
ASME B SEC V - Non destructive examinations and procedures.
ASME B SEC II - Ferrous, nonferrous materials and welding consumables.
ASME B SEC VIII - Boiler & Pressure Vessel Code.
API-1104 - Cross Country Pipeline and Flow Lines.
AWS D 1.1 - Structural Welding Code Steel.
The following are from my experience generally covers in the quality assurance and
through inspection of:
1. Carbon steel :ASTM A106 Gr.B, ASTM A105, A234 WPB, API Gr-X42,
X55, X65etc.
2. Carbon steel for low temperature :ASTM A333 Gr.6, A420 WPL6.
1 of 5 | P a g e

Permanent Address :
3. Low alloy steel for high temperature :ASTM A335 P11, A335 P22 A234 WP11-1/WP22-1
4. Nickel Alloys steel :ASME SA 204 Gr, D&E, ASME SA 203,
5. Stainless Steel :ASME SA 304, 316, 316L etc
6. High alloyed corrosion resisting :Duplex and Super Duplex Steel etc.
Computer Knowledge:
Operating System : Window2000/XP/VISTA
Application : MS Word. Excel, Power Point, Outlook.
Package : Auto CAD2000. 2D Drafting
Internet : Surfing & Browsing
Job Profile/Work Experience in Details:
1.Organizational Profile : G.S. Engineering & Construction (EPC Contractor)
Designation : CONSTRUCTION SUPERVISOR
Project : Clean Fuel Project MAA Refinery (KNPC)
Client : AMEC FOSTER WHEELER
During : JULY 2015 to till continue.
2. Organizational Profile : S.K. Engineering & Construction (EPC Contractor)
Project : Ruwais Refinery Expansion Project (RREP)
Client : TAKREER
During : JULY 2011 to OCT 2014
3. Organizational Profile : M/s. ISCO
Project : KOC – Condensate Recovery Unit Project (Kuwait)
Client : M/s. AMEC
During : MAY 2008 to MARCH 2011.
4.Organizational Profile : Barauni Petro Chemical & Oil Refinery.
2 of 5 | P a g e

Permanent Address :
Client : Barauni Petro Chemical & Oil Refinery.
Designation : CONSTRUCTION SUPERVISOR.
During : FEB 2005 to DEC 2007.
JOB RESPONSIBILITIES HANDLED AND CABABILITIES:
Preparing and monitoring of fabrication sequencing as per codes and standards during fabrication
work, is performed in accordance with the approved construction procedure, latest IFC drawings,
specifications and correct materials.
Performing the job according to fabrication drawings and project client specifications and also after
completion of fit up, arranging for QC inspectors and third party inspector according to approved
ITP.
Ensure that all the fabrication/welding/erection related records such as cutting list, bill of materials,
weld cards, consumables etc are properly archived, and cooperate with Safety and QA/QC inspectors
by performing as per their recommendations.
Monitoring foremen, daily production fit up and welding records and report the status performed to
the Construction Manager. Participating and preparing of Task Risk Assessment for the given job to
categorize and measure the precaution for the task to carryout job safely and without LTI.
Sending feed backs to the line managers for maintaining the project schedule on time. Having a
working knowledge in gas and oil field with all kind of fabrication and erection inspection techniques
for various applicable standards.
Fabrication and erection of structural piping, monitoring construction activities and Schedule, weekly
& monthly progress report, co-ordination with other discipline and supervising Field Erection of
vessels, piping and structural.
Installation of process for utility & firewater pipelines, erection of pressure vessels, receivers, heat
exchangers etc.
Bill of Material (BOM) preparation for individual isometrics.
Material take-off for individual isometrics for particular process areas.
Preparation of cutting list related to Isometrics.
Performing construction and scrapping activities.
Clearing the punch list items, construction activities and site modifications advices from client &
Quality Control department as well.
Performing Hydro Testing & Pneumatic Testing for process and utility piping.
Worked with pre-commissioning activities.
3 of 5 | P a g e

Permanent Address :
Dimensional inspection as per drawing
Witness of leak test of atmospheric and low pressure tanks.
Witness of Hydro Test of different dia ranges of spools and pressure vessel.
Preparation of procedure according to the activity.
Monitoring of material traceability.
Making material traceability report.
Co- ordination with Authorized inspector.
Witness of material identification and transferring heat code and necessary tag.
Making material traceability report
Monitoring the positioning of members, joint preparation, Fit-up, cleanliness, adequacy of Alignment
maintenance. Maintain a Corrective action program to Eliminate Defects.
Monitoring the Holiday detector testing.
Monitoring & witness the High Density Poly ethylene (HDPE) coating & required testing
Overseeing Pneumatic Test, Valves Seat & Body Test Pressure, and Hydro-test of Piping & Pipelines.
Preparing Packages for Hydro-test of Piping & tanks
Analyze corrective & preventive actions taken on NCRs in coordination with the Construction
Manager/Project Manager for final approval of Head.
Inspection of pipeline & making punch list & preparing of test pack for hydro testing.
Witness & inspection of leak test of full & half pad/saddle of piping branches and nitrogen purging.
Inspection and testing of GRE, FRP & RTR pipes, fittings, spools etc.
Checking equipment preservation after hydro test.
Preparing Hydro test Packages for Piping & witnessed the same.
Preparing Punch list & follow up.
Preparation of as built drawings.
Hydrostatic test and Pneumatic test.
Line inspection, final inspection based on P&ID.
Test package clearance and related documentation works.
Self Profile:
Date of Birth : 10.JAN.1986
Father’s Name : MOHAMMAD MUMTAZ
Sex : Male.
4 of 5 | P a g e

Permanent Address :
Marital Status : Unmarried.
Religion : Islam.
Nationality : Indian.
Language Known : English, Urdu & Hindi.
Skype ID : manawwar.hussain4
Passport Details:
Passport No. : M4889802.
Place of Issue : India.
Date of Issue : 22-01-2015.
Date of Expiry : 21-01-2025.
Point of Origin for travel purpose :- From India, Jaharkhad , Ranchi.
I do hereby submit that all the above mentioned information is true to the best of my knowledge.
Place: Jamshedpur Signature
Date: Shamsher Alam
5 of 5 | P a g e

Construction supervisor

More Related Content

What's hot

Viewers also liked

Similar to Construction supervisor

Recently uploaded

Construction supervisor