This curriculum vitae summarizes the qualifications and experience of Mr. Balaji Narasimhan. It outlines his educational background, including degrees in mechanical engineering and business administration. It also lists technical qualifications in welding inspection and non-destructive testing. The work experience section describes over 21 years of experience in quality assurance and inspection roles for oil, gas and petrochemical projects. Recent roles have involved planning, scheduling and overseeing QA/QC activities and inspections to ensure compliance with client and industry standards.

1. Curriculum Vitae
Mr. Balaji Narasimhan Date of Birth: 31 August 1973
No.14, Sudharsan Nagar Nationality: Indian
Srirangam, Tiruchirapalli – 620006 Passport Number: G1919337
Tamilnadu, India Valid Until: 21/03/2017
Telephone Home: 0091 431 2430194
Mobile (Home): 0091 94442 66464
Email: narasimhanbalaji@yahoo.com
balaji3121@gmail.com
Objective : “NO COMPROMISE ON QUALITY”
Academic Qualification :
1. BACHELOR of Science in MECHANICAL ENGINEERING.
2. Master of Business Administration in Total Quality Management.
3. Master of Business Administration Project management.
4. Diploma in Mechanical Engineering passed in 1st
class from SRINIVASA
POLYTECHNIC – KEERANUR – PUDUKOTTAI DISTRICT – TAMILNADU – INDIA.
Technical Qualification :
1. CSWIP 3.2 Certified Senior Welding Inspector by TWI – UK – Certificate No.
20576/2 Valid until 15th
May 2015 (Initial Certification on 22 July 2005) &
(renewed on 08 July 2010) - Submitted for Renewal.
2. BGAS CSWIP Grade – 2 Certified Painting Inspector by TWI – UK – Certificate
No. 41920 Valid Until 14th
May 2019 (Renewed)
3. Certified Lead Auditor from SEQM/TVE Certifications in
 Quality Management System (ISO 9001:2008)
 Occupational Health & Safety Management System (OHSAS 18001:2007)
 Environment Management System (ISO 14001:2004)
4. Registered Engineering Technician (Eng Tech Tech Weld I) by the Engineering
Council – UK. Membership Number – 531624.
5. International Welding Inspector Diploma by IIW – IIS, Diploma No. IIW –
S/GB/04083 Issued on 13th
February 2007.
6. ASNT Level II in
❑ Ultrasonic Testing.
❑ Radiographic Testing.
❑ Radiographic Testing – Film Interpretation.
❑ Visual Testing.
❑ Magnetic Particle Testing.
❑ Liquid Penetrant Testing.
7. SAUDI ARAMCO Approvals with SAP # 70004870
❑ General Mechanical Inspection.
❑ Pressure Vessel Inspection.
❑ Valves & Fittings Inspection.
Computer literacy : MS Office (MS Excel, MS Word, MS Power Point)
CV of Mr. Balaji Narasimhan Page 1 of 11

2. Curriculum Vitae
Professional Training Courses & Seminars:
• Attended One Week Training Program on ISO 9001:2008 - QMS Lead course and examination conducted by
TVE Certification in association with SEQM-UK.
• Attended One Week Training Program on Senior Welding Inspector course and examination conducted by
The Welding Institute UK.
• Attended One Week Training on Welding Inspector course and examination conducted by The Welding
Institute UK.
• Attended One Week Training on Painting & Coating Technology and Inspection conducted by The Welding
Institute UK.
• Attended 30 days training on over view of various NDT Methods conducted by Vaigay Consultants in India.
• Code Book structure and usage of ASME Sec. VIII Div.1, ASME Sec. IX
Safety Related seminars @ PETROLEUM DEVELOPMENT - OMAN:
• HSE induction
• Permit to work
• Gas Test
• H2S Awareness & escape
• Safety Training Observation Programme
Experience Summary
Total Years of Experience : Around 21 of experience with in the Oil & Gas & petrochemical Industry for
Client, Consultant & EPC Contractor.
Positions Held : QA/QC Team Leader, Senior Inspection Engineer, Senior QA/QC Engineer.
Field of Activity : QA/QC, Welding, Painting, NDT, Plant inspection.
Items Inspected : Plant inspection includes, static equipment, piping, pipelines & flow lines from
Gathering stations & associated facilities like manifold, Pressure vessels, heat
Exchangers (Tube & Plate types), cross country Pipelines and associated facilities,
Valves, Structural steel, tanks, Gathering stations, flow lines, etc.
Codes & Standards : ASME, AWS D1.1, ASTM, API, BS, ISO, NACE, TEMA etc.
Area of Interest : QA/QC & Inspection Management, Project Management
Summary of Experiences:
Having around 21 years of working experience in the field of QA/QC, Welding, NDT, Painting & coating, Plant
inspection, Vendor Inspection in the Oil, Gas, Petrochemical, Power and Fertilizer & sugar Industries related with
structural steel fabrication, Tanks, Pressure vessels, Static Equipment, Piping, Pipelines, Flow lines and associated
facilities, performing QA/QC Activities with the interpretation different codes and standards of API, AWS D1.1,
ASTM, BS, ASME Section I, II, V, VIII, IX, ASME B31.3, ASME B31.4, API, TEMA etc.,
Roles & Responsibilities:
 Conduct and Participate in COMPANY Quality or technical compliance audits for CONTRACTOR, Sub
CONTRACTOR or Vendors.
 Preparation of QA/QC Procedures & ensure compliance with company’s policy requirement.
 Review the contract documents for each Construction stage/phase in respect of QA/QC requirements and
procedures and advise the Project Manager of any deficiency.
 Review QA/QC site organization; make sure that, key personnel CV’s are submitted by the CONTRACTORS
and reviewed by PMT’s relevant personnel, and advice the Project Manager of his comments.
CV of Mr. Balaji Narasimhan Page 2 of 11

3. Curriculum Vitae
 Review QA/QC Procedures and document control as submitted by the Contractors/Sub-Contractors and
ensure implementation is in compliance with contract/project requirements.
 Review Inspection Test Plans as submitted by the Contractors and ensure compliance with
contract/project requirements.
 Attend all activities on work site and ensure their compliance with QA/QC procedure in respect of the
format signed off by Contractor’s QA/QC Manager.
 Ensure traceability of all materials and equipment from purchasing and up to delivery on site.
 Assist Project Quality Manager in the need to revise existing or develop new Management System
Documents (Plans, Procedures and Work Instructions).
 Coordination of Package QA/QC activities to ensure that Contractor Quality activities are planned and
carried out in accordance with Project requirements and Criticality Assessment/Surveillance Plan.
 Implementing the Package Audit Programme to cover Surveillance audit activities during all Package
phases.
 Review and approve the Quality Documentation issued by the CONTRACTOR and Suppliers (Quality Plan,
Procedures & other Quality documents)
 Ensure Inspection activities are happened & conducted as per Project quality plan (PQP/ITP), procedures
& client requirements.
 Ensure Inspection activities are achieved as per RFI raised by Sub-contractors & keep record on all RFI &
inspection activities.
 Review inspection reports and records of quality control carried out by CONTRACTOR on completed and
running purchase orders.
 Ensure & Assess adequacy and competence of CONTRACTOR Quality Organization at the engineering,
construction, testing, installation and commissioning phases to assure that the applicable quality
standards are consistently achieved.
 Follow-up and tracking of the Correctives Action Requests (CARs) and Non Conformance Reports (NCRs).
 Arrange and manage Package QC Activities at CONTRACTOR supplier sites, overseeing Execution
CONTRACTOR QA and QC activity and performing direct interventions where received. Ensure that
Package QC coverage is sufficient and that the Inspectors are of the required discipline, experience and
capability.
 Review Inspectors deliverables, analyses and resolve issues and problems emerging during the quality
control activity.
 Review, comment and approve Contractors/Sub-Contractors QA/QC Documentation/Dossiers for
correctness and conformity prior to a structured handover to commissioning team.
 Perform periodic Quality Management System Audit or Process Audit of CONTRACTOR and Key Suppliers.
 Participate in Contractors/Sub-Contractors investigations of significant Quality failures and
offshore/installation failures.
 Lead regular (quarterly or bi-annual) Quality reviews with CONTRACTOR to review quality KPI’S, quality
improvement efforts, quality issues/failures, NCR trends etc.
 Provide weekly & monthly status reports to Package Manager and Project QA/QC Manager on quality
activities, Root Cause Failure Analysis (RCFA), Corrective Actions including Notes/Findings from any
Verification Activities (procedures review, shop visits)
 Conducts all work activities in a safe and environmentally responsible manner by not taking on any task(s)
that are perceived as unsafe and if in doubt, consults supervisor/manager before proceeding.
 Participates in HSE meetings and company QHSE promotional programs.
 Reports all accidents, incidents or neat misses to supervisor/manager or to the QHSE Department if
supervisor/manager is not available.
 Conducting safety toolbox talk and safety meeting according to the company and client’s procedure.
CV of Mr. Balaji Narasimhan Page 3 of 11

4. Curriculum Vitae
Details of Experience:-
Period: June 2015 to till date.
Company: American Bureau of Shipping (ABS IV)
POSITION: Senior Inspection Engineer - Freelancer.
Clients: Various
Roles & Responsibilities:
1. Planning, Organizing, scheduling, coordination of QA/QC Activities in compliance with company and client’s
quality requirements.
2. Attending of Pre-Inspection Meeting on behalf of clients.
3. Qualification of welding procedures, welder’s qualification, preparation of procedure and performance
qualification records.
4. Review of Project Specification, Inspection and Test Plan & other project related procedures.
5. Inspection of Pressure vessel, heat exchangers, tanks, piping, testing of different types of valves, pipelines
(Onshore & offshore), raw material inspection (plates, pipes & fittings), chemical injection skids, structural
steel & supports etc.,
6. Monitoring blasting activity prior to overlay, Monitoring cladding activity for vessels, pipes, flanges & fittings,
monitoring the machining activities, Clad thickness witnessing by NDT as per ITP requirements.
7. Final visual & dimensional inspection, witnessing PMI & hardness testing, monitoring pickling & passivation.
8. Inspection activities which includes from monitoring & witnessing of raw materials, welding, blasting &
coating, mechanical & chemical testing, hydrostatic testing, pneumatic testing, leak testing, NDT (UT, RT, MT,
PT, RTFI, VT), PWHT. Torque testing of bolts etc.
9. Review of material test certificates, inspection reports & test reports.
10. Witnessing of mechanical & chemical testing of raw materials as per project requirements.
11. Witnessing of HIC Testing of loading activities of samples & review reports as per relevant standards.
12. Witnessing of hydrostatic testing of pressure vessel, heat exchangers (tube, shell & plate), piping, valves etc.
14. Verification of Quality compliance as per project requirements.
15. Reviewing of Final MDR & Signing off the P.O Item as per ITP, Project & client’s requirements
Period: December 2014 to May 2015.
Company: VAIGAY CONSULTANTS
POSITION: Senior Inspection Engineer - Freelancer.
Clients: Various
Roles & Responsibilities:
1. Planning, Organizing, scheduling, coordination of QA/QC Activities in compliance with company and client’s
quality requirements.
2. Attending of Pre-Inspection Meeting on behalf of clients.
3. Qualification of welding procedures, welder’s qualification, preparation of procedure and performance
qualification records.
4. Review of Project Specification, Inspection and Test Plan & other project related procedures.
CV of Mr. Balaji Narasimhan Page 4 of 11

5. Curriculum Vitae
5. Inspection of Pressure vessel, heat exchangers, tanks, piping, testing of different types of valves, pipelines
(Onshore & offshore), raw material inspection (plates, pipes & fittings), chemical injection skids, structural
steel & supports etc.,
6. Monitoring blasting activity prior to overlay, Monitoring cladding activity for vessels, pipes, flanges & fittings,
monitoring the machining activities, Clad thickness witnessing by NDT as per ITP requirements.
7. Final visual & dimensional inspection, witnessing PMI & hardness testing, monitoring pickling & passivation.
8. Inspection activities which includes from monitoring & witnessing of raw materials, welding, blasting &
coating, mechanical & chemical testing, hydrostatic testing, pneumatic testing, leak testing, NDT (UT, RT, MT,
PT, RTFI, VT), PWHT. Torque testing of bolts etc.
9. Review of material test certificates, inspection reports & test reports.
10. Witnessing of mechanical & chemical testing of raw materials as per project requirements.
11. Witnessing of HIC Testing of loading activities of samples & review reports as per relevant standards.
12. Witnessing of hydrostatic testing of pressure vessel, heat exchangers (tube, shell & plate), piping, valves etc.
16. Verification of Quality compliance as per project requirements.
17. Reviewing of Final MDR & Signing off the P.O Item as per ITP, Project & client’s requirements
Period: May 2013 to November 2014
Company: LEIGHTON OFFSHORE LTE. DUBAI
POSITION: LEAD QA/QC ENGINEER
PROJECT: SEALINE – S432 - Crude Oil Export Facility Reconstruction Project – IRAQ.
Roles & Responsibilities:
1. Assist the project quality manager in achieving the project quality management objectives and targets for the
project.
2. Ensure the assurance programs are implemented effectively on sub- contractors / suppliers.
3. Review & approving of sub-contractors/suppliers inspection & test plan & quality related procedures &
documents.
4. Ensure the planned inspection levels are effectively implemented for the assigned tasks.
5. Support the construction / installation team with necessary quality information for the project.
6. Coordinate with resident QA/QC Engineers, inspectors for fabrication and action on the reported quality
issues.
7. Interdisciplinary coordination to ensure sub-contractors works are inspected as per the Inspection & test
plans.
8. Review inspection reports & timely action in case of any discrepancies.
9. Ensure the fabrication activities are happened in compliance with the client’s specification & international
standards.
10. Follow-up and tracking of the Correctives Action Requests (CARs) and Non Conformance Reports (NCRs).
11. Ensure the preconstruction tests for welding and coating activities are carried out in compliance with project
requirements.
12. Liaise with third party / employer for any quality control issue resolution related to project.
13. Coordinate with client for inspection notifications & making necessary arrangements if required.
14. Liaise with project / discipline engineers on inspection matters and resolutions for project quality issues.
15. Liaise & report sub-contractors quality & fabrication issues with onsite fabrication & quality representatives.
16. Ensure the inspection reports are generated on time.
17. Surveillance inspection at sub-contractor’s fabrication location.
18. Compiling & verifying manufacturing data record for final sail out of the fabricated items.
CV of Mr. Balaji Narasimhan Page 5 of 11

6. Curriculum Vitae
Period: July 2007 To APRIL 2013
Company: DNV GL GROUP (Formerly GERMANISCHER LLOYD)
POSITION: Senior Inspection Engineer
PROJECTS:
1. Crude Oil Export Facility Reconstruction Project – IRAQ – Inspection & Certifying during Fabrication of Jacket
Legs, Boat landing, Bridges & supports, Piles, Top Side Deck, Piping & structures for valve station facilities @
Lamprell Energy - Sharjah for Client – LEIGHTON OFFSHORE.
2. Abu Dhabi Gas Development Company – SHAH GAS - SG 11 – Shah Sulphur Station & Pipelines; Project #
5268; Inspection of Pressure Vessels @ DESCON Engineering – HFZ – Sharjah.
3. GASCO - HABSHAN SULPHUR GRANULATION PLANT PROJECT # 5267 - Inspection of Valves (ON-OFF, MOV’s &
HOV’s) @ Flowserve FZE – Dubai.
4. Abu Dhabi Gas Development Company – Shah Gas Development Utilities & offsite project (SG 2327) - @
GMMOS – Jebel Ali for inspection of 31 no’s of pressure vessels. (Inconel Cladded & Carbon Steel Non-
Cladded)
5. IRAQ CRUDE OIL EXPORT EXPANSION PROJECT (ICOEEP) PHASE 1 – End User: South Oil Company – Iraq; Client
– LEIGHTON OFFSHORE PTE LTD – DUBAI – U.A.E
6. ADMA OPCO – ZCSC – De-Mothballing project (vendor inspection at various locations in Dubai)
7. ADMA-OPCO (Nasr Umm Lulu Project) – Pressure Vessel Inspection @ GMMOS – Jebel Ali – UAE.
8. ADMA – ZAKUM Water Injection Upgrade Project (Vendor Inspections like Raw materials (Plates, pipes,
flanges, fittings, etc.,), Valves, Chemical Injection Skids, internal & external coating inspection of Flake line
etc., at various locations in Dubai)
9. SHELL – Baker Oil Tools - Worked as SHELL appointed TPI in Baker Oil Tools, Dubai
10. ADCO BAB THAMAMA “G” And HABSHAN 2 – 1.8 MMBOPD Phase – 1 Development project @ FTV PROCLAD
for NPCC.
11. ADCO BAB THAMAMA “G” and Habshan 2 – 1.8 MMBOPD Phase 1 Development Project –at DESCON
Engineering – Sharjah – Stainless Steel Storage Tanks for NPCC.
12. ADMA OPCO – IGD – HAP Project (Glycol Gas De-Hydration Package) @ Quality International – Fujairah..
13. ADMA OPCO – Sea Water Filtration Package.
14. NPCC - B-Series & N15 & N16 – 6 Well Platform Project – at AIL Sharjah – BRACELET Sacrificial Anodes.
15. IGD – 5 – HABSHAN – Utilities & off sites – GASCO – Inconel clad piping @ FTV Proclad.
16. IGD – DAS ISLAND for GAS DEHYDRATION PAKAGE.
17. HABSHAN – 5 Utilities & offsite – Supply of Steel Structures.
18. Potable Water Generation Package, DAS ISLAND.
19. Chemical Injection Skids for ZIRKU Island.
20. GAS Compression Station Project - 2nd
Stage Suction Scrubber (Total Qty – 07 Nº’s)
21. TAWEELAH – FUJAIRAH Gas Pipeline Project - Horizontal Dry Gas Filter Unit (Total Qty - 04 Nº’s.)
22. Installation of 4th
Gas Turbine Generator – Kuwait.
23. New Crude oil pipeline from TL – 3 to Doha East power station – EF/1671.
24. EPIC of Ras-Laffan Common Cooling Sea Water System Phase II for Recirculation Consumers & IPP3. – Supply
of steel structures.
25. SEA Water RO Plant – 800m³/day Supply, Installation, Commissioning of RO Unit for ZIRKU Island
26. ARTICULATED HARBOUR CRANES WITH INTEGRATED HOPPER (KANGAROO) – 2 No’s
27. QATAR Gas II Development project – QG II LNG Berth # 5.
CV of Mr. Balaji Narasimhan Page 6 of 11

7. Curriculum Vitae
28. Qatar Gas 3 & 4 Offshore Facilities.
29. GAS Compression Station Project: DC – 3 CONDENSERS (DE-PROPANISER). Common Cooling Sea Water
System Phase II – Ras-Laffan – Qatar – Supply of steel structures & supports.
Note: Inspection & QA/QC Activity has been conducted for all the above mentioned projects in contractor’s work
site/yard in Dubai, Sharjah, Ras-Al-Khaimah & Fujairah.
Worked with Clients during the tenure with GERMANISCHER LLOYD:
1. ZADCO, GASCO, ADMA OPCO, ADGAS, ADCO – Abu Dhabi.
2. National Petroleum Construction Company – Abu Dhabi.
3. FUJAIRAH Refinery.
4. Snamprogetti – Canada, Italy
5. Crescent Petroleum – Sharjah.
6. Qatar Petroleum – Qatar.
7. KJO, KNPC, KOC – Kuwait.
8. MAERSK Oil – Qatar.
9. Dolphin Energy – Qatar.
10. LEIGHTON OFFSHORE PTE LTD – DUBAI – U.A.E
11. MALAYSIA MARINE AND HEAVY ENGINEERING SDN BHD.
12. PETROFAC – Sharjah.
13. SAIPEM – Italy.
14. OCEAN RUBBER FACTORY – Sharjah.
15. Emirates Techno Casting – Sharjah.
16. TYCO VALVES – Sharjah.
17. EXTRACO – Sharjah (GRP piping)
18. National Iranian GAS Company.
19. Hyundai Engineering Company – KOREA.
20. ARCHIRODON Construction Company – Dubai – UAE.
21. Consolidated Contractor’s International Company – Abu Dhabi.
22. Al-Ghanim International – Kuwait.
23. Kranbau Cranes – Germany.
24. DODSAL Middle East – UAE.
Roles & Responsibilities:
1. Planning, Organizing, scheduling, coordination of QA/QC Activities in compliance with company and client’s
quality requirements.
2. Attending of Pre-Inspection Meeting on behalf of clients.
3. Qualification of welding procedures, welder’s qualification, preparation of procedure and performance
qualification records.
4. Review of Project Specification, Inspection and Test Plan & other project related procedures.
5. Inspection of Pressure vessel, heat exchangers, tanks, piping, testing of different types of valves, pipelines
(Onshore & offshore), raw material inspection (plates, pipes & fittings), chemical injection skids, structural
steel & supports etc.,
6. Inspection of cladded piping, flanges & fittings as per client’s specification which includes NDT, PMI, material
inspection along with MTC.
7. Monitoring blasting activity prior to overlay, Monitoring cladding activity for vessels, pipes, flanges & fittings,
monitoring the machining activities, Clad thickness witnessing by NDT as per ITP requirements.
CV of Mr. Balaji Narasimhan Page 7 of 11

8. Curriculum Vitae
8. Final visual & dimensional inspection, witnessing PMI & hardness testing, monitoring pickling & passivation.
9. Inspection activities which includes from monitoring & witnessing of raw materials, welding, blasting &
coating, mechanical & chemical testing, hydrostatic testing, pneumatic testing, leak testing, NDT (UT, RT, MT,
PT, RTFI, VT), PWHT. Torque testing of bolts etc.
10. Review of material test certificates, inspection reports & test reports.
11. Witnessing of mechanical & chemical testing of raw materials as per project requirements.
12. Witnessing of HIC Testing of loading activities of samples & review reports as per relevant standards.
13. Witnessing of hydrostatic testing of pressure vessel, heat exchangers (tube, shell & plate), piping, valves etc.
18. Verification of Quality compliance as per project requirements.
19. Reviewing of Final MDR & Signing off the P.O Item as per ITP, Project & client’s requirements
Note: Inspection & QA/QC Activity has been conducted for all the above mentioned projects in contractor’s work
site/yard in Dubai, Sharjah, Ras-Al-Khaimah & Fujairah.
PREVIOUS EMPLOYERS:
Period: April 2007 to June 2007
Name of the Employer: SAIPEM PETROMAR – ANGOLA
POSITION: QA/QC ENGINEER
PROJECT: FARM (Flare & Relief Modification project)
Client: Chevron Texaco
Note: Inspection & QA/QC Activity has been conducted for all the above mentioned projects in contractor’s work
site/yard in Saipem – Petromar Yard/Work Site at ANGOLA.
Period: March 2006 to March 2007
Name of the Employer: Moody International – Kingdom of Saudi Arabia
POSITION: Vendor Inspection Engineer & Expeditor.
PROJECT:
• JU’ AYMAH, Gas Plant Expansion Project
• YANSAB Petrochemical Complex Project – YANBU
• Jamnagar Refinery Project
• Khursaniyah Industrial Support Facilities
• Khursaniyah Producing Facilities.Client: Chevron Texaco
Note: Inspection & QA/QC Activity has been conducted for all the above mentioned projects in contractor’s work
site/yard in Jeddah – Kingdom of Saudi Arabia.
Client:
• ARAMCO – Saudi Arabia
• SABIC – Saudi Arabia
• SAMREF – Saudi Arabia.
• Reliance Industries – India
• LINDE – USA
• FLUOR – UK
• TECHNICAS Reunidas – Spain
• Foster Wheeler.
CV of Mr. Balaji Narasimhan Page 8 of 11

9. Curriculum Vitae
Period: June 2005 to February 2006
Name of the Employer: SGS Gulf - Dubai
POSITION: QA/QC ENGINEER
PROJECT: Dolphin project for off shore platform and associated facilities, Project # D-4988
Client: J-Ray McDermott – Jebel Ali – Dubai / Dolphin Energy.
Period: February 2005 to May 2005
Name of the Employer: Industrial Quality Services – Tamilnadu - India
POSITION: QA/QC Inspector.
PROJECT: Various
Client: Various
Period: November 2004 to January 2005
Name of the Employer: BUREAU VERITAS – SULTANATE OF OMAN.
POSITION: Inspection Engineer.
PROJECT: 10 ¾” Pipeline project in between Vintage petroleum and Jennah Hunt Oil Company
Client: Vintage Petroleum / Richtech Engineering – USA
Period: September 2003 to October 2004
Name of the Employer: Consolidated Contractors International Company – Azerbaijan.
POSITION: Inspection Engineer.
PROJECT: 42” BTC – Pipeline Project
Client: BTC COMPANY (BP)
Period: June 2003 to August 2003
Name of the Employer: IPEDEX - QATAR
POSITION: Inspection Engineer.
PROJECT: Common Cooling Water Project (CCWP)
Client: Qatar Petroleum.
Period: April 2003 to May 2003
Name of the Employer: Industrial Quality Services – Tamilnadu - India
POSITION: QA/QC Inspector.
PROJECT: Various
Note: Inspection & QA/QC Activity has been conducted for all the above mentioned various projects in
Contractor’s work site/yard in Tamilnadu-India.
Period: February 2003 to March 2003
Name of the Employer: PETROFAC International – Sharjah.
POSITION: QA/QC Inspector.
Client: Total Fina ELF – IRAN.
Note: Inspection & QA/QC Activity has been conducted for all the above mentioned various projects in
Maritime Industrial Services work site/yard in Sharjah - UAE.
Period: November 2002 to January 2003
Name of the Employer: VELOSI Certification Services – Abu Dhabi.
POSITION: QA/QC Inspector.
PROJECT: Fujairah Water & Power Projects – 62” Pipeline project from Fujairah to Al Ain.
CV of Mr. Balaji Narasimhan Page 9 of 11

10. Curriculum Vitae
Client: TECHNIP – GERMANY.
Period: June 2001 to October 2002
Name of the Employer: AIB Vincotte International & Partner’s – Sultanate of Oman.
POSITION: NDT Inspector.
PROJECT: Corrosion Survey for PDO – OMAN – (Different locations).
Client: Petroleum Development Oman.
Period: March 2001 to June 2001
Name of the Employer: International Inspection Company - Sharjah.
POSITION: NDT Inspector.
PROJECT: Various
Period: October 1999 to February 2001
Name of the Employer: Industrial Quality Services – Tamilnadu - India
POSITION: QA/QC Inspector.
PROJECT: Various
Period: May 1999 to September 1999
Name of the Employer: NDT Corrosion Control Services – Abu Dhabi
POSITION: NDT Inspector.
PROJECT: Various
Period: February 1998 to August 1998
Name of the Employer: International Inspection Company - Sharjah.
POSITION: NDT Inspector.
PROJECT: Various
Client: Various
Period: April 1993 to January 1998
Name of the Employer: Industrial Quality Services – Tamilnadu - India
POSITION: QA/QC Inspector.
PROJECT: Various
Client: Various
Personal Details:
Passport Number: G 1919337
Date of Issue: 22.03.2007
Date of Expiry: 21.03.2017
Place of Issue: Tiruchirapalli
Driving License Details:
UAE - Dubai
Number – 913726
Valid Up to – 02.07.2015
CV of Mr. Balaji Narasimhan Page 10 of 11

11. Curriculum Vitae
Contact References:
Leighton Offshore:
Mr. Karthikeyan Sampath
Email: Karthikeyan.sampath@leightonoffshore.com
Tel. (Mobile) – 00919791008093
DNV GL GROUP:
Mr. Christos Constantinidis – Operations Manager (Dubai)
Email – ccon@dnvgl.com
Tel. (Office) – 00971 4 3274711
Tel. (Mobile) – 00971 50 5825181
Mr. Hermi Padilla – Operation Manager – Abudhabi
Email – hermi.padilla@dnvgl.com
Tel. (mobile) – 00971 50 6328179
VAIGAI Consultants & Industrial Quality Services
Mr. N.Jegannathan
Tel. (Mobile) – 0091 94434 10605
Email: vaigay2002@yahoo.com
ZADCO – ABUDHABI
Mr. A. Udhaya Shankar
Department – OS FIT
Mobile – 00971 50 6686410
Email – ashankar@zadco.ae
Velosi Certification Services – Abu Dhabi - UAE
Mr. N.Rajasekar
Inspection Manager
Mobile: 00971 50 6682960
Email: nrajasek@velosi.ae
CV of Mr. Balaji Narasimhan Page 11 of 11