This document discusses condensation and the formation of fog and clouds. It begins by defining condensation as the process where a gas transforms into a liquid due to changes in pressure and temperature. It then discusses the necessary and sufficient conditions for condensation to occur, including cooling air to below its dew point until saturated and the presence of condensation nuclei. The document proceeds to describe different types of fog like radiation fog, advection fog, and freezing fog that form through various cooling mechanisms. It also covers cloud condensation nuclei and the classification system used to identify different types of clouds.
deals with temperature, density, pressure, winds and humidity parameters of the atmosphere; Prssure gradient force, coriolis force, gravity force and friction force and winds and currents, ; pressure lows and highs, atmospheric circulation, winds.
deals with temperature, density, pressure, winds and humidity parameters of the atmosphere; Prssure gradient force, coriolis force, gravity force and friction force and winds and currents, ; pressure lows and highs, atmospheric circulation, winds.
The earth is the only known planet, on which life exists. The present condition and properties of earth’s atmosphere are one of the main reasons for earth to support life. The atmosphere is the blanket of gases or vapours that surrounds the earth, and held together by the force of gravity.
The presentation shows how relative humidity affects other ecological parameters in meteorology. This also shows the relationship between and among the ecological parameters in meteorology
The earth is the only known planet, on which life exists. The present condition and properties of earth’s atmosphere are one of the main reasons for earth to support life. The atmosphere is the blanket of gases or vapours that surrounds the earth, and held together by the force of gravity.
The presentation shows how relative humidity affects other ecological parameters in meteorology. This also shows the relationship between and among the ecological parameters in meteorology
introduction of condensation, what is it types etc. horizontal condenser, vertical condenser, process aplications, all examples related to the process,
Transformation Mapping of Bubbles' 2-D Circular Shape to an Elliptical Shape Under Influence of a Magnetic Field in Pool Boiling in Microgravity Conditions
Deep Behavioral Phenotyping in Systems Neuroscience for Functional Atlasing a...Ana Luísa Pinho
Functional Magnetic Resonance Imaging (fMRI) provides means to characterize brain activations in response to behavior. However, cognitive neuroscience has been limited to group-level effects referring to the performance of specific tasks. To obtain the functional profile of elementary cognitive mechanisms, the combination of brain responses to many tasks is required. Yet, to date, both structural atlases and parcellation-based activations do not fully account for cognitive function and still present several limitations. Further, they do not adapt overall to individual characteristics. In this talk, I will give an account of deep-behavioral phenotyping strategies, namely data-driven methods in large task-fMRI datasets, to optimize functional brain-data collection and improve inference of effects-of-interest related to mental processes. Key to this approach is the employment of fast multi-functional paradigms rich on features that can be well parametrized and, consequently, facilitate the creation of psycho-physiological constructs to be modelled with imaging data. Particular emphasis will be given to music stimuli when studying high-order cognitive mechanisms, due to their ecological nature and quality to enable complex behavior compounded by discrete entities. I will also discuss how deep-behavioral phenotyping and individualized models applied to neuroimaging data can better account for the subject-specific organization of domain-general cognitive systems in the human brain. Finally, the accumulation of functional brain signatures brings the possibility to clarify relationships among tasks and create a univocal link between brain systems and mental functions through: (1) the development of ontologies proposing an organization of cognitive processes; and (2) brain-network taxonomies describing functional specialization. To this end, tools to improve commensurability in cognitive science are necessary, such as public repositories, ontology-based platforms and automated meta-analysis tools. I will thus discuss some brain-atlasing resources currently under development, and their applicability in cognitive as well as clinical neuroscience.
Richard's entangled aventures in wonderlandRichard Gill
Since the loophole-free Bell experiments of 2020 and the Nobel prizes in physics of 2022, critics of Bell's work have retreated to the fortress of super-determinism. Now, super-determinism is a derogatory word - it just means "determinism". Palmer, Hance and Hossenfelder argue that quantum mechanics and determinism are not incompatible, using a sophisticated mathematical construction based on a subtle thinning of allowed states and measurements in quantum mechanics, such that what is left appears to make Bell's argument fail, without altering the empirical predictions of quantum mechanics. I think however that it is a smoke screen, and the slogan "lost in math" comes to my mind. I will discuss some other recent disproofs of Bell's theorem using the language of causality based on causal graphs. Causal thinking is also central to law and justice. I will mention surprising connections to my work on serial killer nurse cases, in particular the Dutch case of Lucia de Berk and the current UK case of Lucy Letby.
Richard's aventures in two entangled wonderlandsRichard Gill
Since the loophole-free Bell experiments of 2020 and the Nobel prizes in physics of 2022, critics of Bell's work have retreated to the fortress of super-determinism. Now, super-determinism is a derogatory word - it just means "determinism". Palmer, Hance and Hossenfelder argue that quantum mechanics and determinism are not incompatible, using a sophisticated mathematical construction based on a subtle thinning of allowed states and measurements in quantum mechanics, such that what is left appears to make Bell's argument fail, without altering the empirical predictions of quantum mechanics. I think however that it is a smoke screen, and the slogan "lost in math" comes to my mind. I will discuss some other recent disproofs of Bell's theorem using the language of causality based on causal graphs. Causal thinking is also central to law and justice. I will mention surprising connections to my work on serial killer nurse cases, in particular the Dutch case of Lucia de Berk and the current UK case of Lucy Letby.
THE IMPORTANCE OF MARTIAN ATMOSPHERE SAMPLE RETURN.Sérgio Sacani
The return of a sample of near-surface atmosphere from Mars would facilitate answers to several first-order science questions surrounding the formation and evolution of the planet. One of the important aspects of terrestrial planet formation in general is the role that primary atmospheres played in influencing the chemistry and structure of the planets and their antecedents. Studies of the martian atmosphere can be used to investigate the role of a primary atmosphere in its history. Atmosphere samples would also inform our understanding of the near-surface chemistry of the planet, and ultimately the prospects for life. High-precision isotopic analyses of constituent gases are needed to address these questions, requiring that the analyses are made on returned samples rather than in situ.
Cancer cell metabolism: special Reference to Lactate PathwayAADYARAJPANDEY1
Normal Cell Metabolism:
Cellular respiration describes the series of steps that cells use to break down sugar and other chemicals to get the energy we need to function.
Energy is stored in the bonds of glucose and when glucose is broken down, much of that energy is released.
Cell utilize energy in the form of ATP.
The first step of respiration is called glycolysis. In a series of steps, glycolysis breaks glucose into two smaller molecules - a chemical called pyruvate. A small amount of ATP is formed during this process.
Most healthy cells continue the breakdown in a second process, called the Kreb's cycle. The Kreb's cycle allows cells to “burn” the pyruvates made in glycolysis to get more ATP.
The last step in the breakdown of glucose is called oxidative phosphorylation (Ox-Phos).
It takes place in specialized cell structures called mitochondria. This process produces a large amount of ATP. Importantly, cells need oxygen to complete oxidative phosphorylation.
If a cell completes only glycolysis, only 2 molecules of ATP are made per glucose. However, if the cell completes the entire respiration process (glycolysis - Kreb's - oxidative phosphorylation), about 36 molecules of ATP are created, giving it much more energy to use.
IN CANCER CELL:
Unlike healthy cells that "burn" the entire molecule of sugar to capture a large amount of energy as ATP, cancer cells are wasteful.
Cancer cells only partially break down sugar molecules. They overuse the first step of respiration, glycolysis. They frequently do not complete the second step, oxidative phosphorylation.
This results in only 2 molecules of ATP per each glucose molecule instead of the 36 or so ATPs healthy cells gain. As a result, cancer cells need to use a lot more sugar molecules to get enough energy to survive.
Unlike healthy cells that "burn" the entire molecule of sugar to capture a large amount of energy as ATP, cancer cells are wasteful.
Cancer cells only partially break down sugar molecules. They overuse the first step of respiration, glycolysis. They frequently do not complete the second step, oxidative phosphorylation.
This results in only 2 molecules of ATP per each glucose molecule instead of the 36 or so ATPs healthy cells gain. As a result, cancer cells need to use a lot more sugar molecules to get enough energy to survive.
introduction to WARBERG PHENOMENA:
WARBURG EFFECT Usually, cancer cells are highly glycolytic (glucose addiction) and take up more glucose than do normal cells from outside.
Otto Heinrich Warburg (; 8 October 1883 – 1 August 1970) In 1931 was awarded the Nobel Prize in Physiology for his "discovery of the nature and mode of action of the respiratory enzyme.
WARNBURG EFFECT : cancer cells under aerobic (well-oxygenated) conditions to metabolize glucose to lactate (aerobic glycolysis) is known as the Warburg effect. Warburg made the observation that tumor slices consume glucose and secrete lactate at a higher rate than normal tissues.
Slide 1: Title Slide
Extrachromosomal Inheritance
Slide 2: Introduction to Extrachromosomal Inheritance
Definition: Extrachromosomal inheritance refers to the transmission of genetic material that is not found within the nucleus.
Key Components: Involves genes located in mitochondria, chloroplasts, and plasmids.
Slide 3: Mitochondrial Inheritance
Mitochondria: Organelles responsible for energy production.
Mitochondrial DNA (mtDNA): Circular DNA molecule found in mitochondria.
Inheritance Pattern: Maternally inherited, meaning it is passed from mothers to all their offspring.
Diseases: Examples include Leber’s hereditary optic neuropathy (LHON) and mitochondrial myopathy.
Slide 4: Chloroplast Inheritance
Chloroplasts: Organelles responsible for photosynthesis in plants.
Chloroplast DNA (cpDNA): Circular DNA molecule found in chloroplasts.
Inheritance Pattern: Often maternally inherited in most plants, but can vary in some species.
Examples: Variegation in plants, where leaf color patterns are determined by chloroplast DNA.
Slide 5: Plasmid Inheritance
Plasmids: Small, circular DNA molecules found in bacteria and some eukaryotes.
Features: Can carry antibiotic resistance genes and can be transferred between cells through processes like conjugation.
Significance: Important in biotechnology for gene cloning and genetic engineering.
Slide 6: Mechanisms of Extrachromosomal Inheritance
Non-Mendelian Patterns: Do not follow Mendel’s laws of inheritance.
Cytoplasmic Segregation: During cell division, organelles like mitochondria and chloroplasts are randomly distributed to daughter cells.
Heteroplasmy: Presence of more than one type of organellar genome within a cell, leading to variation in expression.
Slide 7: Examples of Extrachromosomal Inheritance
Four O’clock Plant (Mirabilis jalapa): Shows variegated leaves due to different cpDNA in leaf cells.
Petite Mutants in Yeast: Result from mutations in mitochondrial DNA affecting respiration.
Slide 8: Importance of Extrachromosomal Inheritance
Evolution: Provides insight into the evolution of eukaryotic cells.
Medicine: Understanding mitochondrial inheritance helps in diagnosing and treating mitochondrial diseases.
Agriculture: Chloroplast inheritance can be used in plant breeding and genetic modification.
Slide 9: Recent Research and Advances
Gene Editing: Techniques like CRISPR-Cas9 are being used to edit mitochondrial and chloroplast DNA.
Therapies: Development of mitochondrial replacement therapy (MRT) for preventing mitochondrial diseases.
Slide 10: Conclusion
Summary: Extrachromosomal inheritance involves the transmission of genetic material outside the nucleus and plays a crucial role in genetics, medicine, and biotechnology.
Future Directions: Continued research and technological advancements hold promise for new treatments and applications.
Slide 11: Questions and Discussion
Invite Audience: Open the floor for any questions or further discussion on the topic.
Nutraceutical market, scope and growth: Herbal drug technologyLokesh Patil
As consumer awareness of health and wellness rises, the nutraceutical market—which includes goods like functional meals, drinks, and dietary supplements that provide health advantages beyond basic nutrition—is growing significantly. As healthcare expenses rise, the population ages, and people want natural and preventative health solutions more and more, this industry is increasing quickly. Further driving market expansion are product formulation innovations and the use of cutting-edge technology for customized nutrition. With its worldwide reach, the nutraceutical industry is expected to keep growing and provide significant chances for research and investment in a number of categories, including vitamins, minerals, probiotics, and herbal supplements.
2. Condensation is the process of a substance in a gaseous
state transforming into a liquid state. This change is caused
by a change in pressure and temperature of the substance.
Condensation can form
dew, fog, or clouds and
they all need saturated air
to develop.
Condensation is the
direct cause of precipitation.
It is the reverse of
evaporation.
Water vapor is changed
from the vapor state and
becomes droplets of water.
3. The necessary condition:
cooling of air to below its dew point until
it is saturated
[individual / combined changes in air volume, pressure,
temperature / R.H.]
The sufficient condition:
presence of condensation nuclei
[hygroscopic particles – wettable substances]
4. The necessary condition:
cooling of air to below its dew point until
it is saturated
- radiation cooling
- advective cooling
- orographic and frontal uplifting & cooling
- convective or adiabatic cooling
5. The sufficient condition:
presence of condensation nuclei
- Condensation does not take place easily in clear or
pure air which can be cooled below its dew point
without condensation occurring.
hygroscopic particles – wettable substances
They attract water-vapour molecules when the
moisture content is near saturation point.
e.g. dust, sea salt from evaporated spray,
sulphur acid from combustion, volcanism
6. Hygroscopic-
water - seeking
nuclei . Ex.
Ocean salt, dust
and smoke
Hydrophobic-
water-repelling
such as oils,
gasoline, and
paraffin waxes
7. Cloud condensation
nuclei or CCNs (also
known as cloud seeds) are
small particles typically 0.2
µm, or 1/100th the size of
a cloud droplet on which
water vapour condenses.
Water requires a non-
gaseous surface to make
the transition from a
vapour to a liquid; this
process is
called condensation.
8. Aitken nuclei- radius less than 0.2 m
Large nuclei- Particles ranging in size from 0.2 to
1 μm
Giant nuclei,- are much larger and have radii
exceeding 1 μm.
◦ The condensation nuclei most favorable for producing
clouds (called cloud condensation nuclei) have radii of
0.1 μm or more.
◦ Usually, between 100 and 1000 nuclei of this size exist in
a cubic centimeter of air.
◦ Condensation nuclei are extremely light (many have a
mass less than one-trillionth of a gram), so they can
remain suspended in the air for many days.
9.
10. defined when visibility < 1 km
Condensation on less active
nuclei
Fogs form when air saturates (its
relative humidity reaches around
100 percent), and the water
vapor within the air mass
condenses on small particles in
the air to form liquid cloud
droplets.
is a visible mass consisting of cloud water droplets or ice
crystals suspended in the air at or near the Earth's
surface.
11. Mist is defined as 'when there is such obscurity
and the associated visibility is equal to or exceeds
1000 m'.
Mist and fog are often used interchangeably - and
they are closely related - but there is a key
difference which depends on how far you can see
through them.
The defining difference between mist and fog is
visibility; if it is less than 1,000 metres we call it
'fog' and if visibility is greater than 1,000 metres
we call it 'mist'.
12. Haze is also another term
associated with fog but
technically are different from
each other.
Haze is traditionally an
atmospheric phenomenon
where dust, smoke and other
dry particles obscure the clarity
of the sky.
Dry haze is when there are
dust or salt particles in the air
that hinder visibility.
Wet haze occurs when water
vapor condenses on the
particles, which happens at a
relative humidity of around
75%.
13. • Type of CN affects fog
• Over the ocean
– Fewer, larger drops
• Over urban areas
– More, smaller drops
– Lower visibility
– London Fog
• Chemical reactions can
cause fog to become acidic
• If temperatures drop below
freezing, freezing fog
may result
14. by cooling the air
(air is cooled below
its saturation point
(dew point)
by evaporation
and mixing - water
vapor is added to the
air by evaporation,
and the moist air
mixes with relatively
dry air.
15. Radiation fog
Advection fog
Upslope fog
Evaporation or
steam fog
Precipitation or
frontal fog
16. Results from radiation cooling of the ground and
the surrounding air.
It occurs at night
It requires clear skies and fairly high relative
humidity.
Under these circumstances, the ground and the
air just above it will cool rapidly.
Because the relative humidity is so high, just a
small amount of cooling will lower the temperature
to the dew point.
17. • Form upward from the
ground
– Deepest around sunrise
– May intensify after
sunrise (dew
evaporation)
• “Burns Off” with more
insolation
– Dissipates from bottom up
– Dissipates easily around
edges (thin, mixing
18. • type of fog where warm,
moist air moves over
cooler land and/or water,
cooling the air moving over
it to its dew point
• Breeze required
• May combine with radiation
fog
• radiational fog tends to
form in calm conditions
over inland areas,
advection fog tends to
form in breezier conditions
along coastlines
19.
20. A type of fog where it forms when
winds blow air up a slope (called
orographic lift), adiabatically
cooling it as it rises, and causing
the moisture in it to condense.
Air expands adiabatically (cooling
or warming that results when air
expands or contracts, but not
because heat was added or
removed.)
This is the only type of fog that
forms adiabatically.
If the dew point is reached, an
extensive layer of fog may form.
21.
22. forms over bodies of water
overlain by much colder air.
The most common form,
which occurs when colder air
overlies
Warmer water, is often called
steam fog since the
condensing water vapor looks
like steam rising from the
water
This commonly occurs over
lakes in autumn, particularly
in the early morning hours,
when cold air moves over
water that is still warm from
summer
23. Lake-effect snow is produced during cooler atmospheric conditions
when a cold air mass moves across long expanses of warmer lake
water, warming the lower layer of air which picks up water vapor from
the lake, rises up through the colder air above, freezes and is deposited
on the leeward (downwind) shores.
24. forms as precipitation falls into drier air below the
cloud, the liquid droplets evaporate into water
vapor.
As the rain falls through the layer of cold air, some
of the water from the rain drops evaporates
If enough water vapor is added to the air it can
become saturated, resulting in condensation into
very tiny water droplets (fog)
This most commonly is associated with warm
fronts in winter when warm air rises over cold air
which is why this type of fog is sometimes called
frontal fog
25.
26. Ground fog is fog that
obscures less than 60% of
the sky and does not extend
to the base of any overhead
clouds. However, the term is
sometimes used to refer to
radiation fog.
Valley fog forms in mountain
valleys, often during winter. It
is the result of a temperature
inversion caused by heavier
cold air settling into a valley,
with warmer air passing over
the mountains above.
27. Freezing fog occurs when
liquid fog droplets freeze to
surfaces, forming white soft or
hard rime. This is very common
on mountain tops which are
exposed to low clouds. It is
equivalent to freezing rain, and
essentially the same as the ice
that forms inside a freezer
which is not of the "frostless" or
"frost-free" type.
Ice fog is any kind of fog where
the droplets have frozen into
extremely tiny crystals or ice in
midair. Generally this requires
temperatures at or below
−35 °C (−30 °F), making it
common only in and near the
Arctic and Antarctic regions.
28. As air moves onshore, it crosses the coastline at nearly a right angle. This causes
the air to flow together or converge in the vicinity of the headlands. This area of weak
convergence causes the surface air to rise and cool just a little. If the rising air is
close to being saturated, it will cool to its dew point, and fog will form. Meanwhile,
near the beach area, the surface air spreads apart or diverges as it crosses the
coastline. This area of weak divergence creates sinking and slightly warmer air.
Because the sinking of air increases the separation between air temperature and
dew point, fog is less likely to form in this region..
29. Fog dissipates usually in an
hour through solar heating
It takes several hours in the
valley and coastal regions
particularly during cold
season.
Fog clears at outer edges
first.
Dissipation maybe affected
by wind, fog thickness,
overlying cloud layers and
underlying surfaces ( snow
cover, cool lakes or ocean
and soil condition)
30.
31.
32. A cloud is a visible
aggregate of tiny
water droplets and/or
ice crystals
suspended in the
atmosphere and can
exist in a variety of
shapes and sizes.
33. In 1802 an Englishman by the name of Luke Howard
invented the cloud naming system that is still in use
today. Howard used Latin names to describe clouds.
• part of a cloud's name describes height
• part tell us something about the cloud’s shape
The prefixes denoting heights are:
cirro, high clouds above 20,000 feet;
alto are mid level clouds between 6,000 – 20,000 ft
There is no prefix for low level clouds.
The names denoting shapes are:
cirrus mean curly or fibrous
stratus means layered
cumulus means lumpy or piled.
Nimbo or nimbus is added to indicate that a cloud
can produce precipitation.
34. • Properties:
– Variety of sizes
– Contain water drops
and/or ice crystals
– Various heights
– Stratospheric clouds
rare, but important for
creation of the ozone
hole
35.
36.
37.
38.
39. Clouds that grow high up into the atmosphere
rather than spreading across the sky.
They span all levels of the troposphere and can
even rise up into the stratosphere.
Clouds with vertical growth develop by warm air
rising from the surface
Types of CVD
Cumulus
Cumulonimbus
40.
41. Cumulus humilis
◦ Develop primarily from
convection
◦ Associated with fair
weather
◦ Usually evaporate shortly
after formation and are
vertically limited
Cumulus fractus
◦ Ragged-edge cumulus
clouds that are smaller
than cumulus humilis and
scattered across the sky.
◦ strong tattered edges;
◦ rapidly changing contours.
42. Cumulus congestus
◦ More organized
development as cloud
towers appear
◦ Each tower is indicative of
uplift cells
◦ Cells are short lived but are
constantly replaced
◦ Each tower progresses
higher
◦ Large height extension; like
cauliflower-looking forms.
Cumulus mediocris
◦ Moderate development in
height.
◦ Not so wide, not so tall
43. Cumulus virga
◦ look like a rod or stripe
◦ responsible for cloud
seeding.
◦ This is because it carries
the small particles to
different cloud formation.
Cumulus praecipitatio
◦ look like puffy cotton balls in
the sky
◦ With precipitation
◦ common in most parts of
the world although they are
more frequently visible in
tropical climates where
there is a higher level of
humidity in the area
44. Cumulus velum
◦ With a veil (from ice) on the
upper part of the subsequent
swelling - sometimes broken
◦ sail-shaped clouds and they
appear as a thin sheet of
cloud
◦ argely formed during fair
weath
Cumulus pileus
◦ with flat cap or hood (ice
crystals).
◦ buffer between cumulus or
cumulonimbus formations
45. Cumulus arcus
◦ horizontally formed cloud
and it is a low level cloud
which usually produces a
drizzle or rain.
◦ Shield cloud and looks like a
wall cloud
Cumulus tuba
◦ white clouds seen on sunny
days and usually against the
blue sky. This heap of cloud
has a flat basis that is seen
in the middle and its vertical
development produces a
tower-like or even a
cauliflower's shape.
◦ with funnel cloud or tornado
46. Cumulus pannus
◦ shreds or patches of clouds
which are large, cottony or
even puffy in nature
◦ These clouds can be seen
around the globe except in
Antarctica since it is very
cold there
Cumulus radiatus
◦ also known as cloud streets
because they appear to form
as parallel lines that run
across the sky
◦ Less common
47. Cumulus mamma
Common white and puffy,
these clouds look like
cotton balls or bubbles that
are hanging downwards
from the sky.
The cumulus mamma
clouds tend to have a flat
base and appear lumpy.
They do not necessarily
form in a large formation
and it is quite common to
see small, free flying
formations of the cumulus
mamma cloud
52. Low clouds, with their bases lying below 2000 m
(6500 ft), are almost always composed of water
droplets; however, in cold weather, they may
contain ice particles and snow.
Types
◦ Stratus
◦ Stratocumulus
◦ Nimbostratus
53.
54. Stratus fractus
appear during a cloudy day
having a dark gray to almost
white color as they are made up
of water droplets and generally
formed in precipitation.
look like ragged sheets which
became separated from a large
stratus clouds because of the
wind.
Stratus nebulosus
uniformly layered, foggish-
looking and monotonous.
most common forms of stratus
clouds
55. Stratus opacus
look like any other stratus
clouds that are flat and have
no features at all
usually comes in different
forms and sizes sometimes
resembling different animals
or creatures.
they almost entirely cover the
sky and blocks out the sun in
the area.
Stratus praecipitatio
normally relatively featureless
and will partially or fully cover
the sky.
Initially they may be light grey
but progressively they will
darken as they absorb more
moisture
Rain cloud
56. Stratus translucidus
characterized by its veil-
like features and are thinly
spread out in the sky such
that the moon or the sun is
still recognizable.
Stratus undulatus
typically seen as slabs of
cloud that can actually
cover the whole sky; the
only distinguishing feature
can be the waves as the
base of the clouds are
ruffled by the wind.
64. Nimbostratus pannus
look like tubes
essentially flat featureless and
essentially boring.
cover the sky with a grey and
depressing clouds which
signifies that something is
developing and the weather may
be changing for the better
Nimbostratus praecipitatio
generally bring heavier
precipitation
They are not accompanied by
thunder or lightning
Will generally last longer and are
constant
65. Nimbostratus virga
have shoots of rain
falling like triangular
wedges that are wider
at the top, near the
base of the cloud that
reach a point
somewhere above the
ground without
touching it.
Rain bearing cloud
66. oBases between 2000 and 6000 m (6-19,000 ft)
oLargely composed of liquid drops
oCarry the “alto” prefix
oAltostratus is typically thick enough to almost
fully obscure the sun or moon and blanket the
sky from horizon to horizon
oAltocumulus, typically typified by a banded
arrangement of billowy clouds
77. ◦ Bases above 6000 m (19,000 ft)
◦ Composed of ice
◦ Cirrus is the most common
Wispy appearance due to low water content and cold
temperatures
Fall streaks may appear below as ice crystals descend
Mares’ tails - horizontal swirls, occur in turbulent conditions
Cirrostratus occurs when cirrus thickens and stretch across
the sky
May form a halo about the sun or moon as entering light is
refracted 22o by cloud ice crystals
Cirrocumulus occurs due to thickening causing a billowy
appearance which resembles fish scales - a mackerel sky
89. formed when water
vapor condenses and
freezes around small
particles (aerosols) that
exist in aircraft exhaust.
Some of that water
vapor comes from the
air around the plane;
and, some is added by
the exhaust of the
aircraft.
The exhaust of an
aircraft contains both
gas (vapor) and solid
particles.
90. Lenticular clouds
Form along the crest of
waves caused by air flowing
over mountains
They are frequently lens
shaped which is why they are
called “lenticular” clouds
They can form one above
another like a stack of
pancakes and, given their
unusual appearance, “UFO
sightings” are common when
these clouds are present
91. A localized lowering from the
rain-free base of a strong
thunderstorm.
The lowering denotes a storm's
updraft where rapidly rising air
causes lower pressure just below
the main updraft, which
enhances condensation and
cloud formation just under the
primary cloud base.
Wall clouds take on many shapes
and sizes.
Some exhibit strong upward
motion and cyclonic rotation,
leading to tornado formation,
while others do not rotate and
essentially are harmless
92. A low, horizontal,
sometimes wedge-
shaped cloud associated
with the thunderstorm
Although often appearing
ominous, shelf clouds
normally do not produce
tornadoes
93. created from instability
associated with air
flows having marked
vertical shear and
weak thermal
stratification.
The common name for
this instability is
Kelvin-Helmholtz
instability.
These instabilities are
often visualized as a
row of horizontal
eddies aligned within
this layer of vertical
shear.
94. pouch-like cloud
structures and a rare
example of clouds in
sinking air.
Sometimes very
ominous in appearance,
mammatus clouds are
harmless and do not
mean that a tornado is
about to form; a
commonly held
misconception.
mammatus are usually
seen after the worst of a
thunderstorm has
passed
95. are found very high in the
Earth's atmosphere. They
are called Polar
Mesospheric Clouds when
they are viewed from
space, and are referred to
as noctilucent clouds
when viewed by observers
on Earth.
Unlike lower clouds that are
associated with weather,
these clouds form at the
very edge of space in the
atmospheric layer called the
mesophere.
scientists think these clouds
are made of frozen water or
ice crystals.
96. Most clouds form as air parcels are lifted and cooled to
saturation
The main mechanism for cooling air is to force it to rise. Air
expands as it rises, because the pressure decreases through
the atmosphere, and therefore cools. Eventually it may
become saturated and the water vapour then condenses into
water droplets to form cloud. If the temperature reaches
below about -20 deg C many of the water droplets will have
frozen so the cloud is mainly composed of ice crystals.
Mechanisms that Lift Air
◦ Orographic Lift occurs as air is displaced over topographic
barriers such as mountains and hills
◦ On the windward side of the barrier, air is displaced toward
higher altitudes and undergoes adiabatic cooling, possibly
to saturation
◦ On the leeward side, descending air warms through
compression leading to a dry rainshadow
98. ◦ When boundaries between
air of unlike temperatures
(fronts) migrate, warmer air
is pushed aloft
◦ This results in adiabatic
cooling and cloud formation
◦ Cold fronts occur when
warm air is displaced by
cooler air
◦ Warm fronts occur when
warm air rises over and
displaces coldA cold front (a) and
a warm front (b)
99. Convergence
◦ Atmospheric mass is non-uniformly distributed over Earth
◦ Air advects from areas of more abundant mass to areas of
less mass
◦ Air moving into these low pressure regions converges
◦ Stimulates rising motions and adiabatic cooling
Localized Convection
◦ Localized surface heating may lead to spatially limited free
convection
◦ Vertical motions are stimulated from the surface upward
resulting in towering clouds and a chance for intense
precipitation over small spatial scales
100. water
low T
supersaturation
Cloud Condensation Nuclei (CCN) or Ice Nuclei
(IN)
101. Sky opacity- the amount of sky visible in relation
to the presence of cloud layers—is described on
the basis eighths or oktas.
102. Why are clouds white?
Since light travels as waves of different lengths, each color has its very own unique wavelength.
Clouds are white because their water droplets or ice crystals are large enough to scatter the light
of the seven wavelengths (red, orange, yellow, green, blue, indigo, and violet), which combine to
produce white light.
Why do clouds turn gray?
Clouds are made up of tiny water droplets or ice crystals, usually a mixture of both. The water and
ice scatter all light, making clouds appear white. If the clouds get thick enough or high enough all
the light above does not make it through, hence the gray or dark look. Also, if there are lots of
other clouds around, their shadow can add to the gray or multicolored gray appearance.
Why do clouds float?
A cloud is made up of liquid water droplets. A cloud forms when air is heated by the sun. As it
rises, it slowly cools it reaches the saturation point and water condenses, forming a cloud. As long
as the cloud and the air that its made of is warmer than the outside air around it, it floats!
How do clouds move?
Clouds move with the wind. High cirrus clouds are pushed along by the jet stream, sometimes
traveling at more than 100 miles-per-hour. When clouds are part of a thunderstorm they usually
travel at 30 to 40 mph.
Why do clouds form at different heights in the atmosphere?
The characteristics of clouds are dictated by the elements available, including the amount of
water vapor, the temperatures at that height, the wind, and the interplay of other air masses.