APROMON is a unique Control Loop Performance Monitoring (CLPM) tool that monitors the performance of your plant and identifies control problems very quickly. Ask for a free demonstration if you want to learn how efficient this tool works. - info@yazzoom.com

1. MONITOR THE
PERFORMANCE OF
YOUR PLANT
APROMON™ is a Control
Loop Performance
Monitoring Tool that is
exceptionally fast to set-
up and easy to learn
thanks to its intuitive user
interface.
APROMON™ continuously
monitors the performance
of all types of primary and
advanced control loops.
APROMON™ has a unique
power to convert the
performance of any type
of controller into a single
“grade”, just like the grade
given by a professor to his
students.
APROMON
• Improves your plant’s profitability.
• Increase process stability and safety by
identifying and prioritizing ill-tuned
loops and malfunctioning actuators.
• Configurable to generate the alerts and
regular reports that you desire. See how
your plant’s performance evolves.
• Reduce raw material and energy
consumption by identifying and
remedying oscillating loops.
• Much faster to install and configure than
competitor products.
• Increase efficiency and effectiveness of
process control engineers and
technicians. APROMON helps them
focus on what matters most.
• Benefit from low total cost of ownership
of APROMON thanks to its ease of use.
Benefits of using APROMON
Monitors the performance of your control loops
Indicates which loops have priority to be improved
“We were amazed to see how fast and easy the
installation was. It took us only an hour or at most
half a day to install and start using immediately. The
user interface is really simple and can be learnt by
even new persons.” ” Louie Weeks , Engineer at ExxonMobil
Extraordinary
high ROI
PID Control Loop Monitoring Software

2. info@yazzoom.com
www.yazzoom.com
Tel/fax +32 (0)53 39 77 10
APROMON™ is a product of PiControl Solutions LLC
APROMON™ is distributed and serviced in EMEA by Yazzoom
© 2013 All Rights Reserved
Calculates 25 valuable performance criteria
Calculates over 25 criteria for every OPC tag and stores
them in an historical archive for later analysis and
trending. Shows how the performance evolved over
time. APROMON also produces a helpful diagnostic text
comment about the performance of each tag.
Short Earn-Back period
Delivers quantifiable benefits with typical paybacks
ranging from a few weeks to a year. As much as
€200000 to €2000000/year recurring savings can be
realized by modern Control Loop Performance
Monitoring (CLPM) tools.
Easy to learn and use
APROMON is much faster to set-up than other CLPM
tools. The whole process of installing it, configuring it
and bringing it to work takes only about 4 hours.
APROMON is easy to learn thanks to its familiar Excel™-
like user interface.
For any industry
Any industry with production processes
involving tens, hundreds or thousands of
control loops will benefit from APROMON.
For very slow to fast control
APROMON works for any scan times as long
as the data can be read through OPC. The
data is automatically intelligently scaled
appropriately.
For any DCS, SCADA or PLC system
APROMON monitors the loop performances
by continuously analyzing the production
data. As long as your production data is
available through OPC, you’re good to go.
Generates alerts and reports you want
APROMON can be easily configured to
generate only the alerts and reports that you
want. It can send an email alert when certain
thresholds are exceeded.
APROMON
APROMONTM is a software tool for monitoring the performance of the control loops in
your plant. It helps process control engineers and technicians focus on those loops
that have the highest priority, and helps to restore the quality of affected loops.
• Which loops are not controlling well?
• Which loops are oscillating?
• Which loops have matching frequencies?
• Which control valves are not working well?
• Which loops have asymmetrical errors?
• What are the proportional, integral and
derivative contributions to the control action?
• Which loops need derivative adjustment?
• Which loops need filter adjustment?
• What is the utilization factor of the loops?
• Which loops do the operators intervene most?
• Which loops have instrument signal problems?
• …
Main functions of APROMON