A short introduction to Gasification process and a brief description on various types of Gasifiers used in industries to obtain fuel and energy through this presentation.
References:-
1. http://www.enggcyclopedia.com/2012/01/types-gasifier/
2. https://en.wikipedia.org/wiki/Gasification
3. https://www.youtube.com/watch?v=GkHKXz3VaFg
4. https://www.google.co.in/
Material handling equipments : conveyors and elevators ajaz malla
Material handling is the movement, protection, storage and control of materials and products throughout manufacturing, warehousing, distribution, consumption and disposal. As a process, material handling incorporates a wide range of manual, semi-automated and automated equipment and systems that support logistics and make the supply chain work.
Improved chulhas are scientifically designed, environmental friendly cookstoves with a thermal efficiency of about 20 per cent or more as compared to 5% to 10% efficiency of traditional chulhas.
biogas plant and types of biogas plant consisting of Single stage continuous type,Two stage continuous type,batch type,Fixed Dome type and Floating Drum Type Plants,KVIC Plant
Gasifiers are generally classified according to the fluidization regime in the gasifier; moving bed, fluidized bed, and entrained flow. This chapter provides examples of each type of gasifier. The Lurgi gasifier is the oldest gasifier technology that is still widely used in commercial practice.
The PPT includes importance of grain drying, moisture content determination methods, equilibrium moisture content, different mode of heat transfer, types of different drying methods, different dryers etc. The presentation is best suitable for graduation level students.
Briquetting Plant Produces Energy From Biomass WasteNilam Zalavadiya
The biomass briquetting press technology is eco-convenient fuel referred to as white coal briquette production technology that is additionally cost-efficient project.
A short introduction to Gasification process and a brief description on various types of Gasifiers used in industries to obtain fuel and energy through this presentation.
References:-
1. http://www.enggcyclopedia.com/2012/01/types-gasifier/
2. https://en.wikipedia.org/wiki/Gasification
3. https://www.youtube.com/watch?v=GkHKXz3VaFg
4. https://www.google.co.in/
Material handling equipments : conveyors and elevators ajaz malla
Material handling is the movement, protection, storage and control of materials and products throughout manufacturing, warehousing, distribution, consumption and disposal. As a process, material handling incorporates a wide range of manual, semi-automated and automated equipment and systems that support logistics and make the supply chain work.
Improved chulhas are scientifically designed, environmental friendly cookstoves with a thermal efficiency of about 20 per cent or more as compared to 5% to 10% efficiency of traditional chulhas.
biogas plant and types of biogas plant consisting of Single stage continuous type,Two stage continuous type,batch type,Fixed Dome type and Floating Drum Type Plants,KVIC Plant
Gasifiers are generally classified according to the fluidization regime in the gasifier; moving bed, fluidized bed, and entrained flow. This chapter provides examples of each type of gasifier. The Lurgi gasifier is the oldest gasifier technology that is still widely used in commercial practice.
The PPT includes importance of grain drying, moisture content determination methods, equilibrium moisture content, different mode of heat transfer, types of different drying methods, different dryers etc. The presentation is best suitable for graduation level students.
Briquetting Plant Produces Energy From Biomass WasteNilam Zalavadiya
The biomass briquetting press technology is eco-convenient fuel referred to as white coal briquette production technology that is additionally cost-efficient project.
GREEN FUEL BRIQUETTES FOR SUSTAINABLE DEVELOPMENTDeepi Makwana
Briquetting is a way to convert loose biomass residues such as almond shells, rice husk, cotton Salk into high density solid blocks that can be used as bio fuel. Biomass is obtained from agriculture waste and industrial waste. This waste either burnt or dumped into sea but biomass briquetting is the process to convert this waste into useful products.
International Journal of Computational Engineering Research(IJCER) is an intentional online Journal in English monthly publishing journal. This Journal publish original research work that contributes significantly to further the scientific knowledge in engineering and Technology.
There are many good reasons for using renewable energy sources and briquetting plant is the renewable and sustainable source of energy. They are cleaner and less polluting than traditional forms of energy, such as coal, gas and lignite.
Study of Combustion Characteristics of Fuel Briquettesijceronline
International Journal of Computational Engineering Research(IJCER) is an intentional online Journal in English monthly publishing journal. This Journal publish original research work that contributes significantly to further the scientific knowledge in engineering and Technology.
Leaving greener marks on national and global industrial horizon are our installations of bio-mass briquetting plants delivering flawless performance by processing a range of agro, forest and industrial waste to create great value not only for our valued and satisfied client base but for global environment thereby saving precious fossil fuels.
EarthDay2022 - Profitable Plastics Recycling with Coperion TechnologyCoperion
April 22 is international #EarthDay – a global initiative that has the objective to educate people on sustainability and activate the environmental movement. This year’s theme is “Invest in our planet” to remind us that we need to take actions now if we want to preserve a livable environment for future generations. At Coperion, we believe that we all can make an impact in our respective field of specialty! As a leading engineering and system manufacturing company with decades of experiences in the plastics industry, we have observed a growing interest in recycling technology over the years. Despite major breakthroughs in this field, plastics recycling is still considered difficult and expensive in comparison to virgin polymer. To help the industry unlock its recycling potential, Coperion is committed to make plastics recycling as profitable as possible without compromising on the product quality. We vigorously develop state-of-the-art feeding, material handling and compounding systems as well as diverse processes that make plastics recycling possible and economical. In addition, our R&D teams are dedicated to further improving our solutions and achieving even higher efficiency levels.
Effects of Process Parameters on the Density and Durability of Biomass Brique...IJERD Editor
This work aimed at improving the density and durability of biomass briquettes made by composting and pressing biomass (wet method). Though this type of briquettes requires much less energy to form, they are usually of much lower density compared to briquettes made from dry biomass. In this experimental work three parameters were considered, which are type of biomass, composting time, and moisture content. Biomass samples were mixed with water and left to decompose for varying number of days. The moisture content of samples was conditioned accordingly and briquettes were made from these samples using a die and a pressing machine. Briquettes were tested for density and durability. Results show that among saw dust, groundnut shells and rice husk briquettes, rice husk briquettes attain highest density (up to 0.47g/cm3). For all three biomass types, durability index tend to increase with an increase in moisture content. Durability of groundnut shells and rice husk briquettes tend to decrease with an increase in composting time while that of saw dust increase with composting time. For all the three biomasses, the apparent density decreases with an increase in moisture content. For groundnut shells and rice husks the density increases with compositing time while for saw dust the change in density is negligible.
Biomass Briquettes are bio fuel substitute to bio coal, lignite and other fossil fuels. They are used to heat industrial boilers in order to produce electricity form steam.
Charcoal briquettes are made of all kinds of agro-wastes and forest residues. If there are abundant biomass resource available, you can consider starting a charcoal briquette plant. Charcoal briquettes have wide application both in industrial and home use featured with high density, small volume & good combustibility. Our professional salesman can give you suggestions to choose the most suitable type.
Briquetting plant avoid green house effectsshreyavaidya
we can say that briquetting plant is one of the options through which healthy and green environment can be established and also can avoid many environmental hurdles.
Make wood residue into fuel pellets for plywood factoryJossie Xiong
The plywood waste pellet is a kind of bio-pellet mainly made of wood residue and offcut of the scrap plywood, the complete making process consist of chipping, drying, pelletizing, cooling, etc.
Engine, classification of heat engine, classification of IC engine, component of IC engine, four stroke engine and 2- stroke engine, petrol and diesel engine, comparisons, terminology related to engine
Soil and water conservation engineering, water erosion, types of water erosion, splash erosion, sheet erosion, rill erosion, gully erosion, stream bank erosion, coastal erosion
Different systems of IC Engine
Fuel supply and cooling system of I.C. engine – types, components and their functions, working principle of forced circulation cooling system.
Ignition and power transmission system of I.C engine – types, components and their functions,
working principle of battery ignition system
Lubrication system of I.C. engine – types, purpose, components and their functions, working principle of forced feed system.
wind erosion and its control measures, factor affecting wind erosion, mechanics of wind erosion, types of soil transportation, suspension, saltation and surface creep, windbreak, shelterbelt, sand duns
Universal soil loss equation, soil loss estimation, factors of USLE, its use and limitation, soil loss measurement by multi slot divisor and coshocton wheel sampler
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...Dr.Costas Sachpazis
Terzaghi's soil bearing capacity theory, developed by Karl Terzaghi, is a fundamental principle in geotechnical engineering used to determine the bearing capacity of shallow foundations. This theory provides a method to calculate the ultimate bearing capacity of soil, which is the maximum load per unit area that the soil can support without undergoing shear failure. The Calculation HTML Code included.
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.
Quality defects in TMT Bars, Possible causes and Potential Solutions.PrashantGoswami42
Maintaining high-quality standards in the production of TMT bars is crucial for ensuring structural integrity in construction. Addressing common defects through careful monitoring, standardized processes, and advanced technology can significantly improve the quality of TMT bars. Continuous training and adherence to quality control measures will also play a pivotal role in minimizing these defects.
CFD Simulation of By-pass Flow in a HRSG module by R&R Consult.pptxR&R Consult
CFD analysis is incredibly effective at solving mysteries and improving the performance of complex systems!
Here's a great example: At a large natural gas-fired power plant, where they use waste heat to generate steam and energy, they were puzzled that their boiler wasn't producing as much steam as expected.
R&R and Tetra Engineering Group Inc. were asked to solve the issue with reduced steam production.
An inspection had shown that a significant amount of hot flue gas was bypassing the boiler tubes, where the heat was supposed to be transferred.
R&R Consult conducted a CFD analysis, which revealed that 6.3% of the flue gas was bypassing the boiler tubes without transferring heat. The analysis also showed that the flue gas was instead being directed along the sides of the boiler and between the modules that were supposed to capture the heat. This was the cause of the reduced performance.
Based on our results, Tetra Engineering installed covering plates to reduce the bypass flow. This improved the boiler's performance and increased electricity production.
It is always satisfying when we can help solve complex challenges like this. Do your systems also need a check-up or optimization? Give us a call!
Work done in cooperation with James Malloy and David Moelling from Tetra Engineering.
More examples of our work https://www.r-r-consult.dk/en/cases-en/
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Overview of the fundamental roles in Hydropower generation and the components involved in wider Electrical Engineering.
This paper presents the design and construction of hydroelectric dams from the hydrologist’s survey of the valley before construction, all aspects and involved disciplines, fluid dynamics, structural engineering, generation and mains frequency regulation to the very transmission of power through the network in the United Kingdom.
Author: Robbie Edward Sayers
Collaborators and co editors: Charlie Sims and Connor Healey.
(C) 2024 Robbie E. Sayers
Automobile Management System Project Report.pdfKamal Acharya
The proposed project is developed to manage the automobile in the automobile dealer company. The main module in this project is login, automobile management, customer management, sales, complaints and reports. The first module is the login. The automobile showroom owner should login to the project for usage. The username and password are verified and if it is correct, next form opens. If the username and password are not correct, it shows the error message.
When a customer search for a automobile, if the automobile is available, they will be taken to a page that shows the details of the automobile including automobile name, automobile ID, quantity, price etc. “Automobile Management System” is useful for maintaining automobiles, customers effectively and hence helps for establishing good relation between customer and automobile organization. It contains various customized modules for effectively maintaining automobiles and stock information accurately and safely.
When the automobile is sold to the customer, stock will be reduced automatically. When a new purchase is made, stock will be increased automatically. While selecting automobiles for sale, the proposed software will automatically check for total number of available stock of that particular item, if the total stock of that particular item is less than 5, software will notify the user to purchase the particular item.
Also when the user tries to sale items which are not in stock, the system will prompt the user that the stock is not enough. Customers of this system can search for a automobile; can purchase a automobile easily by selecting fast. On the other hand the stock of automobiles can be maintained perfectly by the automobile shop manager overcoming the drawbacks of existing system.
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...Amil Baba Dawood bangali
Contact with Dawood Bhai Just call on +92322-6382012 and we'll help you. We'll solve all your problems within 12 to 24 hours and with 101% guarantee and with astrology systematic. If you want to take any personal or professional advice then also you can call us on +92322-6382012 , ONLINE LOVE PROBLEM & Other all types of Daily Life Problem's.Then CALL or WHATSAPP us on +92322-6382012 and Get all these problems solutions here by Amil Baba DAWOOD BANGALI
#vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore#blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #blackmagicforlove #blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #Amilbabainuk #amilbabainspain #amilbabaindubai #Amilbabainnorway #amilbabainkrachi #amilbabainlahore #amilbabaingujranwalan #amilbabainislamabad
AKS UNIVERSITY Satna Final Year Project By OM Hardaha.pdf
Briquetting
1. Renewable Energy and
Green Technology
Topic: Briquetting
by
Dr. Sanjay Singh Chouhan
Assistant Professor
College of Agriculture, JNKVV,
Powarkheda, Hoshangabad
2. Briquetting
• The process of compaction of biomass into a product of higher
density than the original raw material is known as densification
or briquetting.
• The loose biomass to form briquettes has compression ratio of
approximately 7:1.
• Briquetting of biomass is an age old technology and specially in
India, is as old as time. Cowdung cakes, fuel balls made from
coal-dust are some examples.
3. • The process of briquetting consists of applying pressure to a
mass of particles with or without binder and converting it into a
compact aggromate.
• The products obtained could be in a solid geometrical form or in
the form of hollow cylinders.
• The compacted fuels, known as briquettes is more or less similar
to coal and has potential to replace conventional solid fuels and
even diesel to meet the local needs of various sectors.
• These briquettes can burn with a smokeless and clean flame,
ideal for domestic and small scale heating purpose.
4. Advantages in briquetting of biomass
1. The process helps to solve the problem of loose waste / residues
of agricultural forestry and agro-industrial processing so as to
check environmental pollution.
2. The process increases the net calorific value per unit volume.
3. The fuel produced is uniform in size and quality.
4. No toxic gas and sulphur emission, even no odour during
combustion.
5. Densified product is easy to transport and store. Bulk density of
briquettes (1000 kg /m3) is higher than agro-wastes (50 kg /m3).
6. Fire risk in loose storage of biomass is minimized.
5. 7. The process produces high quality fuel with very low ash
content (2-5 %) compared to 30-40% in case of coal.
8. The briquettes are easy to burn, as briquettes have lower
ignition temperature compared to coal.
10. Piston-Ram Press Technology
• This technology primarily involves drying, grinding, sieving,
compacting and cooling operation.
• Any moisture in raw material is first remove in dryer.
• Dried material is ground in a hammer-mill grinder.
• Grinded material is separated from air in cyclone separator.
• Then pass through a screen for sieving and thereafter stored in a
bin which is placed over briquetting press.
• The ram in the press continuously pack material through a taper
die and briquettes are produced.
12. Screw Press Technology
• In this process, the biomass material is initially dried to get
optimum moisture content by passing hot air produced by
burning of some briquettes in the furnace.
• The dried biomass material is further preheated to a
temperature of 100 to 120’C in a oil-heated heat exchanger.
• The material is fed to a screw press where a revolving screw
(600rpm) compacts material.
• Then it is forced through a heated die to get final briquettes.