The document provides information on bed making procedures and principles in a hospital setting. It discusses the importance of preventing infection transmission, ensuring patient comfort and safety, and using proper body mechanics. The key steps of bed making include preparing clean linens and supplies, explaining the process to the patient, removing dirty linens, dusting the bed, spreading clean sheets and blankets in a specific order, and making the bed neatly before helping the patient back into it.

1. Bed Making
- Khyati Chaudhari

2. Definition
It’s process of making neat & clean bed for the client in the hospital.

3. Principles to keep in mind

4. Principle 1
Micro organisms are found everywhere on the skin, on the
articles used by the client and in the environment. The nurses
take care to prevent the transference of micro organisms from
the source to the new host by direct or indirect contact or prevent
the multiplication of the microorganisms.
• The nurse washes her hands before and after bed making to protect
the client and herself from cross infection.

5. Principle 1
• When changing bed linen, follow principles of medical asepsis by keeping
soiled linen away from the uniform.
• Place soiled linen in special linen bags before placing in a hamper.
• To avoid air currents that spread microorganisms, never shake the linen.
• To avoid transmitting infection, do not place soiled linen on the floor. If
clean linen touches the floor or any unclean surface, immediately place it in
the dirty linen container.

6. Principle 1
• Dry dusting raises dust. Damp dusting is recommended.
• The nurse keeps a reasonable distance from the client’s face to prevent
droplet infection.
• Cleaning an area where there are less number of organisms before
cleaning an area where there are numerous organisms minimizes the
spread of organism to the clean area. E.g. Clean the bed first before
cleaning the bedside locker.

7. Principle 1
• The linen removed from the isolation unit is disinfected first before
they are sent to laundry.

8. Principle 2
A safe and comfortable bed will ensure rest, sleep and prevent
several complications in bedridden patients. E.g. bedsore, foot
drop etc.
• The body exerts uneven pressure against the mattress, the pressure is
greatest over the bony prominences. Lumps and creases in the bed can
cause bedsores due to friction between the bed and mattress or
wrinkled sheets. Therefore the nurses should take care to make the bed
smooth and unwrinkled.

9. Principle 2
• Pull the bottom sheet tightly so that there is no wrinkles.
• Keep the linen tucked far enough under the mattress, keep it fixed,
tight and smooth.
• While tightening the sheets, do not alter the shape of the mattress.
• No wet linen should remain on the bed.

10. Principle 2
• A bed made for a client should allow enough freedom for moving from side
to side. The movement of the client stimulates circulation, prevent bed sores
and maintains muscle tone. Comfort devices are used to provide additional
comfort to the client.
• If the client is in bed for longer time , tight upper bedding may cause foot
drop.
• It can be prevented by making a pleat in the top sheet and blanket across
the foot of the bed.

11. Principle 2
• While tucking the upper bedding, ask the client to flex his knees.
• Place a pillow, foot board or cradle at the foot of the bed to take
the weight of the upper bedding.

12. Principle 3
Good body mechanisms maintain the body alignment and
prevents fatigue.
• During bed making use safe patient handling procedures and proper
body mechanics .
• The stability of the body is assured by keeping its center of gravity
over its base. When the base is wide it ensures that the center of
gravity will fall through its base. In standing position the nurse can
have a wide base by separating her feet.

13. Principle 3
• The nearer to center of gravity a weight is held, the less is the strain
produced. E.g.. When opening the linen it should be placed on the
edge of the bed rather than holding it above the shoulder level.
• Always raise the bed to the appropriate height before changing linen so
you do not have to bend or stretch over the mattress. You move back
and forth to opposite sides of the bed while applying new linen.

14. Principle 3
• Body mechanics and safe handling are important when turning or
repositioning the patient in bed.
• When tucking the sheets under the mattress, flexing is done by knees
and hips. This position shifts the work to the long and strong muscles
of the thighs and keep the back in good alignment. This reduces strain
on the back.

15. Principle 3
• When placing the linen on the bed and tucking them under the
mattress face the direction of work and move with the work rather
than twisting the body and over reaching.

16. Principle 4
Systematic ways of functioning saves time, energy and
materials.
• When patients are confined to bed, organize bed-making activities to
conserve time and energy.
• Assemble all articles and arrange them conveniently before starting the
bed making.
• Arrange the linen in the reverse order of use.

17. Principle 4
• Finish on one side of the bed before going to the opposite side
• When stripping the bed, remove the bed linen one by one holding the
open end towards the floor, so that the client’s possessions and the
hospital articles are not send to the laundry.
• The bed sheets are folded in such a way that it can be replaced easily.

18. General Principles

19. • The patient’s privacy, comfort, and safety are all important when
making a bed.
• Using side rails to aid positioning and turning, keeping call lights
within the patient’s reach and maintaining the proper bed position help
promote comfort and safety.
• After making a bed, return it to the lowest horizontal position and
verify that the wheels are locked to prevent accidental falls when the
patient gets in and out alone.

20. • When possible, make the bed while it is unoccupied . Use judgment to
determine the best time for the patient to sit up in a chair so you can
make the bed. When making an unoccupied bed, follow the same basic
principles as for occupied bed making.

21. Purposes of Bed-Making

22. • To provide a clean and comfortable bed for the patient.
• To give a neat and tidy appearance to the unit.
• To keep it ready for any emergencies.
• To receive the patient comfortably.
• To provide active and passive exercise to the patient.

23. • To establish interpersonal relationship.
• To economize the time, material and energy.
• To teach relatives how to take care of the patient at home.
• To prevent bed sores.
• To observe the client.

24. Types of Bed
1. Open bed
2. Closed bed
3. Occupied bed
4. Admission bed
5. Post operative bed
6. Cardiac bed
7. Amputation bed/divided bed
8. Fracture bed
9. Therapeutic bed (renal bed,
rheumatism bed, blanket bed)

25. Open Bed
• It is a bed, made when it is about to
be occupied by either a new patient
or an ambulatory patient.

26. Closed Bed
• It is an unoccupied or empty bed
made to receive the patient and
is fully covered with counter
pane to protect it from dust and
dirt. On admission
patient, the closed
of the
bed is
converted in to an open bed.

27. Purposes
• To keep the bed ready for occupancy.
• To provide a neat and tidy appearance to the unit.

28. Occupied Bed
is made with the
• This bed
patient in it.

29. Purposes
• To make a bed with least possible discomfort to the patient.
• To handle the bed clothes skillfully while the patient is on bed, giving least
disturbance to the occupant.
• To provide a neat, clean and tidy appearance.

30. Admission Bed
• This is the bed prepared to receive a newly admitted patient.
 Purposes :
• To welcome the patient.
• To provide immediate care, safety and comfort.
• To protect the bed linen while giving bath on admission.

31. Post-operative Bed
• It is a bed prepared for a patient
who is recovering from the
effects of anesthesia following
surgery.

32. Purposes
• To receive the patient conveniently.
• To provide warmth and comfort.
• To prevent shock.
• To prevent injury.
• To prevent soiling of the bed.
• To meet any emergency.

33. Cardiac Bed
• A bed prepared for patients with
cardiac diseases.
 Purposes:
bed for the
• To prepare the
cardiac patients.
• To relieve dyspnea.

34. Amputation bed/divided bed
• It is a bed in which top linen is
divided into two parts to
visualize the amputed part of
the lower limbs without
disturbing the patient.

35. Purposes
• To watch the stump for hemorrhage and apply tourniquet instantly.
• To take the weight of the bed clothes off the patient.
• To keep the stump in position.

36. Fracture Bed
• It is a bed which is prepared for
patients with fracture, bone
diseases and deformity.

37. Purposes
• To prevent undue sagging of mattress.
• To immobilize the fractured part.
• To restrict sudden jerky movements.
• To keep the traction in position.

38. Therapeutic Bed
• Renal/ Rheumatism/Blanket
bed:-
• It is a bed made for patients
suffering from rheumatism or
renal disease.

39. Purposes
• To carry the weight of the bed clothes off the painful joints.
• To keep the patient warm.
• To induce sweating .

40. Nurses Responsibility In Bed-Making
 Preliminary Assessment :
• Check the doctor’s order for specific precautions regarding the movement
and positioning of the client.
• Assess the client’s ability for self care.
• Check the furniture and linen available in the client’s unit.

41. • Assess the number of clean linen needed.
• Assess the articles needed for the comfort of the client. E.g. : blankets,
backrests.

42. Preparation of the articles – Open Bed
• Bottom sheet
• Mackintosh
• Draw sheet
• Top sheet
• Blanket
• Pillow cover (pillow case)
• Additional articles :
• Laundry bag
• Dusters
• A bowl with antiseptic
solution (savlon 1:40)
• Akidney tray

43. Mackintosh & Draw sheet

44. Kidney Tray

45. Laundry bag

46. Preparation of the client & unit
• Explain the procedure to the client to win the co operation and
confidence of the client.
• Explain how the client can assist.
• Screen the client to provide privacy if needed.
• Move furniture away from the bed and move the bed away from the
wall.

47. • Lower the back rest if any.
• Place the laundry bag within the reach.

48. Procedure
• Keep the articles near to the unit.
• Explain the procedure. Make the patient to sit in a chair comfortably.
• Hand washing.
• Remove the pillow and place it in a side.
• Remove the old linens, if there(blanket, top sheet, draw sheet,
mackintosh, bottom sheet).

49. • Dust the mattress and the cot and the furnitures.
• Spread the bottom sheet, mackintosh and draw sheet.
• Tuck the near side first from top to bottom. Make metre corner.
• Go to opposite side. Tuck that side.
• Spread the top sheet ( and blanket if needed).

50. • Make a knee pleat. Tuck near side bottom and then the opposite side.
allow the sides to hang freely.
• Fanfold the top sheets to the bottom.
• Put the pillow cover on pillow. Place it with open end away from the
door side.

52. After care of client, unit & equipments
• Help the client to get in to the bed.
• Replace the comfort devises used.
• See that the whole unit is clean and tidy before you leave the unit.
• Send the laundry bag with soiled linen to laundry. If stains are present
on the linen, remove them with appropriate methods before sending
them for laundry.

53. • Soak the duster in antiseptic solution to disinfect it. Rinse it with clean water
and put to dry.
• Hand washing.
• Record the procedure.