The application of signal processing techniques to wireless communications is an emerging area that has recently achieved dramatic improvement in results and holds the potential for even greater results in the future as an increasing number of researchers from the signal process and communications areas participate in this expanding field. From an industrial viewpoint also, the advanced signal processing technology cannot only dramatically increase the wireless system capacity but can also improve the communication quality including the reduction of all types of interference. The present paper deals with simulation model of square root raised cosine pulse shaping filter for WCDMA with different parameters of the filter at 5Mhz.The present paper deals with study of Simulation Parameters (Number of Bits, Number of Errors) of Pulse Shaping FIR Filter at different value of group delay(2,4,6,8) to the calculate BER for WCDMA.
Welcome to International Journal of Engineering Research and Development (IJERD)IJERD Editor
journal publishing, how to publish research paper, Call For research paper, international journal, publishing a paper, IJERD, journal of science and technology, how to get a research paper published, publishing a paper, publishing of journal, publishing of research paper, reserach and review articles, IJERD Journal, How to publish your research paper, publish research paper, open access engineering journal, Engineering journal, Mathemetics journal, Physics journal, Chemistry journal, Computer Engineering, Computer Science journal, how to submit your paper, peer reviw journal, indexed journal, reserach and review articles, engineering journal, www.ijerd.com, research journals,
yahoo journals, bing journals, International Journal of Engineering Research and Development, google journals, hard copy of journal
The peer-reviewed International Journal of Engineering Inventions (IJEI) is started with a mission to encourage contribution to research in Science and Technology. Encourage and motivate researchers in challenging areas of Sciences and Technology.
In recent past the influence of Radar has played a significant part in various fields. Radar sensing is one of
the prime application by which velocity and distance of a moving target can be found out. A joint RadCom
system to serve both radar sensing and wireless communication is proposed which ensures better
performance in terms of spectral efficiency, extended detection range and cost effectiveness. Such systems
demand for a common waveform which is designed in this work that perfectly matches to the system
requirements. OFDM multi carrier technique is chosen to generate a common waveform. Applicability of
multiple antenna technique for direction of arrival estimation is also considered. MIMO-OFDM technique
has gained much interest in the field of communication which improves the signal to noise ratio and lowers
the bit error rate. On the other hand the usage of MIMO reflects in the form of interference between
signals. In order to overcome this effect beamforming technique is used. In addition to theoretical
explanations we have also simulated and discussed the results for the proposed RadCom system using
MATLAB simulation tool.
Welcome to International Journal of Engineering Research and Development (IJERD)IJERD Editor
journal publishing, how to publish research paper, Call For research paper, international journal, publishing a paper, IJERD, journal of science and technology, how to get a research paper published, publishing a paper, publishing of journal, publishing of research paper, reserach and review articles, IJERD Journal, How to publish your research paper, publish research paper, open access engineering journal, Engineering journal, Mathemetics journal, Physics journal, Chemistry journal, Computer Engineering, Computer Science journal, how to submit your paper, peer reviw journal, indexed journal, reserach and review articles, engineering journal, www.ijerd.com, research journals,
yahoo journals, bing journals, International Journal of Engineering Research and Development, google journals, hard copy of journal
The peer-reviewed International Journal of Engineering Inventions (IJEI) is started with a mission to encourage contribution to research in Science and Technology. Encourage and motivate researchers in challenging areas of Sciences and Technology.
In recent past the influence of Radar has played a significant part in various fields. Radar sensing is one of
the prime application by which velocity and distance of a moving target can be found out. A joint RadCom
system to serve both radar sensing and wireless communication is proposed which ensures better
performance in terms of spectral efficiency, extended detection range and cost effectiveness. Such systems
demand for a common waveform which is designed in this work that perfectly matches to the system
requirements. OFDM multi carrier technique is chosen to generate a common waveform. Applicability of
multiple antenna technique for direction of arrival estimation is also considered. MIMO-OFDM technique
has gained much interest in the field of communication which improves the signal to noise ratio and lowers
the bit error rate. On the other hand the usage of MIMO reflects in the form of interference between
signals. In order to overcome this effect beamforming technique is used. In addition to theoretical
explanations we have also simulated and discussed the results for the proposed RadCom system using
MATLAB simulation tool.
A review paper on the papr analysis of orthogonal frequency division multiple...ijmnct
OFDM (Orthogonal Frequency Division Multiplexing) has been raised a new modulation technique. Due
to its advantages in multipath fading channel e.g. robust against ISI, ICI and some other advantages like
best QoS for multiple users, efficient usage of bandwidth it is suggested to be the modulation technique for
next generation 4G networks e.g. LTE. But along with all its advantages there are some disadvantages also
e.g. High PAPR (Peak to Average Power Ratio) at the transmitter end and BER (Bit Error Rate) at the
receiving end. Since OFDM is only used in the downlink of 4G networks. To reduce the problems of OFDM
some techniques e.g. SLM, PTS, Clipping, Coding, & Pre-coding etc are suggested but none of them is
reduce the PAPR and BER to an acceptable value. This Paper will discuss some techniques of PAPR &
BER reduction, and their advantages and disadvantages in detail.
With the concept of 3G & 4G services OCDMA is one of the important technologies, that provide a very high speed communication. In this technology multiple users can communicate simultaneously to transfer different kind of data. OCDMA enables the best use of available bandwidth and the spectrum to represent a cost efficient network. But in a network there is always the requirement to increase the security and the efficiency or the throughput of a multiuser communication in the OCDMA network. The proposed work is about to increase the efficiency in a Noisy channel. Here the work will be performed on impulse noised network. We are here proposing the orthogonal approach along with OCDMA to improve the throughput. We are trying to show the results in terms of noise ratio and the derived throughput. The proposed work is about to reduce this packet loss and to increase the throughput in the noisy network. To overcome this drawback and to increase the throughput we are using the concept of OFDM along with CDMA. This concept is represented as the Orthogonal CDMA.
IJERA (International journal of Engineering Research and Applications) is International online, ... peer reviewed journal. For more detail or submit your article, please visit www.ijera.com
Channel Estimation Techniques in MIMO-OFDM LTE SystemsCauses and Effects of C...IJERA Editor
There is an increasing demand for high data transmission rates with the evolution of the very large scale integration (VLSI) technology. The multiple input multiple output-orthogonal frequency division multiplexing (MIMO-OFDM) systems are used to fulfill these requirements because of their unique properties such as high spectral efficiency, high data rate and resistance towards multipath propagation. MIMO-OFDM systems are finding their applications in the modern wireless communication systems like IEEE 802.11n, 4G and LTE. They also offer reliable communication with the increased coverage area. The bottleneck to the MIMO-OFDM systems is the estimation of the channel state information (CSI). This can be estimated with the help of any one of the Training Based, Semiblind and Blind Channel estimation algorithms. This paper presents various channel estimation algorithms, optimization techniques and their effective utilization in MIMO-OFDM for modern wireless LTE systems.
Performance Analysis of Ultra Wideband Communication SystemEditor IJMTER
Ultra-Wideband (UWB) is a radio transmission scheme that uses extremely low power
pulses of radio energy spread across a wide spectrum of frequencies. UWB has several advantages
over conventional continuous wave radio communications including potential support for high data
rates, robustness to multipath interference and fading. The paper covers Ultra Wide-Band
technology. General description, Challenges, various modulation schemes such as OOK, PAM,
PPM, and BPSK under specified Ultra Wide Band regimes: low Power spectral density, large
spreading ratio and a highly dispersive channel. The capacity and BER performance of a single user
ultra wideband communication is investigated for various modulation schemes and coded, uncoded
methods also simulated. Fading channel like Ricean and Rayleigh are compared. Channelized digital
receiver concept is discussed.
IMPLEMENTATION OF LINEAR DETECTION TECHNIQUES TO OVERCOME CHANNEL EFFECTS IN ...IJCI JOURNAL
Spatial diversity technique enables improvement in quality and reliability of wireless link. Antenna
diversity along with understanding effects of channel on transmitted signal and methods to overcome the
channel impairment plays an important role in wireless communication where sharing of channel occurs
between users. In this paper single input single output system (SISO) is compared with multiple input
multiple output system (MIMO) in terms of bit error rate performance. Bit error rate performance is also
evaluated for MIMO with least squares (LS) and Minimum mean square error (MMSE) linear detection.
Further analysis and simulation is done to understand the effect of channel imperfections on BER.
PERFORMANCE EVALUATION OF THE EFFECT OF NOISE POWER JAMMER ON THE MOBILE BLUE...IJCNCJournal
Network jammers can uncover the reliability of the wireless networks, where the position of the jammer node permit the network to cope with jamming leveraging varieties of defence strategies. Wireless Bluetooth network is a short range network, where the Bluetooth transceiver is operating in the 2.4 GHz ISM (industrial, scientific and medical) radio band, and a special type of frequency hopping pattern was included with the specification of the Bluetooth technology to offer the necessity requirement for the matching Radio Frequency RF channels. This paper calculates and evaluates the effect of noise power
jammer and follower jammer on the Personal Area Network (PAN) Bluetooth network. The results prove
that the effect on the Bluetooth network depends on many factors such as power density, distance and
immunity technique, which is used in many Bluetooth networks
Performance Analsis of Clipping Technique for Papr Reduction of MB-OFDM UWB S...ijcisjournal
Multiband Orthogonal Frequency Division Multiplexing (MB-OFDM) is used as efficacious procedure for
ultra-wideband (UWB) wireless communication applications, which divides the spectrum into various subbands,
whose bandwidth is approximately 500MHz. Major arduousness in multiband-OFDM is ,it have
very large peak to average power ratio value which causes the signal to enter into dynamic region that
consequence in the loss of orthogonal properties and results in the interference of the carrier signals which
crops the amplifier saturation and finally limits the capacity of the system. Many PAPR amortize
algorithms have reported in the survey and pre-coding is PAPR reduction which is inserted after
modulation in the OFDM system. The Existing work presents the reduction of that value by different
clipping techniques namely Classical-Clipping (CC), Heavy side-Clipping (HC), Deep-Clipping (DC) and
Smooth-Clipping (SC) and their comparison analysis is done. Every clipping method is best at its own
level .The proficiency of these strategies are evaluated in locutions of average power disparity, complete
system decadence and PAPR reduction. Finally results show the MB OFDM yields better performance to
reduce PAPR in effective way.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
IOSR Journal of Electronics and Communication Engineering(IOSR-JECE) is an open access international journal that provides rapid publication (within a month) of articles in all areas of electronics and communication engineering and its applications. The journal welcomes publications of high quality papers on theoretical developments and practical applications in electronics and communication engineering. Original research papers, state-of-the-art reviews, and high quality technical notes are invited for publications.
Rapid developments in modern wireless communication permit the trade of spectrum scarcity. Higher data rate and wider bandwidth emerge the development in growing demand of wireless communication system. The innovative solution for the spectrum scarcity is cognitive radio (CR). Cognitive radio is the significant technology used to utilize the spectrum effectively. The important aspect of CR is sensing the spectrum band and detects the presence or absence of the primary user in the licensed band. Moreover, another serious issue in next generation (5G) wireless communication is to decide the less complex 5G waveform candidate for achieving higher data rate, low latency and better spectral efficiency. Universal filtered multi-carrier (UFMC) is one of the noticeable waveform candidates for 5G and its applications. In this article, we investigate the spectrum sensing methods in multi-carrier transmission for cognitive radio network applications. Especially, we integrate the sensing algorithm into UFMC transceiver to analyze the spectral efficiency, higher data rates and system complexity. Through the simulation results, we prove that the UFMC based cognitive radio applications outperform the existing Orthogonal Frequency Division Multiplexing (OFDM) based CR applications.
A review paper on the papr analysis of orthogonal frequency division multiple...ijmnct
OFDM (Orthogonal Frequency Division Multiplexing) has been raised a new modulation technique. Due
to its advantages in multipath fading channel e.g. robust against ISI, ICI and some other advantages like
best QoS for multiple users, efficient usage of bandwidth it is suggested to be the modulation technique for
next generation 4G networks e.g. LTE. But along with all its advantages there are some disadvantages also
e.g. High PAPR (Peak to Average Power Ratio) at the transmitter end and BER (Bit Error Rate) at the
receiving end. Since OFDM is only used in the downlink of 4G networks. To reduce the problems of OFDM
some techniques e.g. SLM, PTS, Clipping, Coding, & Pre-coding etc are suggested but none of them is
reduce the PAPR and BER to an acceptable value. This Paper will discuss some techniques of PAPR &
BER reduction, and their advantages and disadvantages in detail.
With the concept of 3G & 4G services OCDMA is one of the important technologies, that provide a very high speed communication. In this technology multiple users can communicate simultaneously to transfer different kind of data. OCDMA enables the best use of available bandwidth and the spectrum to represent a cost efficient network. But in a network there is always the requirement to increase the security and the efficiency or the throughput of a multiuser communication in the OCDMA network. The proposed work is about to increase the efficiency in a Noisy channel. Here the work will be performed on impulse noised network. We are here proposing the orthogonal approach along with OCDMA to improve the throughput. We are trying to show the results in terms of noise ratio and the derived throughput. The proposed work is about to reduce this packet loss and to increase the throughput in the noisy network. To overcome this drawback and to increase the throughput we are using the concept of OFDM along with CDMA. This concept is represented as the Orthogonal CDMA.
IJERA (International journal of Engineering Research and Applications) is International online, ... peer reviewed journal. For more detail or submit your article, please visit www.ijera.com
Channel Estimation Techniques in MIMO-OFDM LTE SystemsCauses and Effects of C...IJERA Editor
There is an increasing demand for high data transmission rates with the evolution of the very large scale integration (VLSI) technology. The multiple input multiple output-orthogonal frequency division multiplexing (MIMO-OFDM) systems are used to fulfill these requirements because of their unique properties such as high spectral efficiency, high data rate and resistance towards multipath propagation. MIMO-OFDM systems are finding their applications in the modern wireless communication systems like IEEE 802.11n, 4G and LTE. They also offer reliable communication with the increased coverage area. The bottleneck to the MIMO-OFDM systems is the estimation of the channel state information (CSI). This can be estimated with the help of any one of the Training Based, Semiblind and Blind Channel estimation algorithms. This paper presents various channel estimation algorithms, optimization techniques and their effective utilization in MIMO-OFDM for modern wireless LTE systems.
Performance Analysis of Ultra Wideband Communication SystemEditor IJMTER
Ultra-Wideband (UWB) is a radio transmission scheme that uses extremely low power
pulses of radio energy spread across a wide spectrum of frequencies. UWB has several advantages
over conventional continuous wave radio communications including potential support for high data
rates, robustness to multipath interference and fading. The paper covers Ultra Wide-Band
technology. General description, Challenges, various modulation schemes such as OOK, PAM,
PPM, and BPSK under specified Ultra Wide Band regimes: low Power spectral density, large
spreading ratio and a highly dispersive channel. The capacity and BER performance of a single user
ultra wideband communication is investigated for various modulation schemes and coded, uncoded
methods also simulated. Fading channel like Ricean and Rayleigh are compared. Channelized digital
receiver concept is discussed.
IMPLEMENTATION OF LINEAR DETECTION TECHNIQUES TO OVERCOME CHANNEL EFFECTS IN ...IJCI JOURNAL
Spatial diversity technique enables improvement in quality and reliability of wireless link. Antenna
diversity along with understanding effects of channel on transmitted signal and methods to overcome the
channel impairment plays an important role in wireless communication where sharing of channel occurs
between users. In this paper single input single output system (SISO) is compared with multiple input
multiple output system (MIMO) in terms of bit error rate performance. Bit error rate performance is also
evaluated for MIMO with least squares (LS) and Minimum mean square error (MMSE) linear detection.
Further analysis and simulation is done to understand the effect of channel imperfections on BER.
PERFORMANCE EVALUATION OF THE EFFECT OF NOISE POWER JAMMER ON THE MOBILE BLUE...IJCNCJournal
Network jammers can uncover the reliability of the wireless networks, where the position of the jammer node permit the network to cope with jamming leveraging varieties of defence strategies. Wireless Bluetooth network is a short range network, where the Bluetooth transceiver is operating in the 2.4 GHz ISM (industrial, scientific and medical) radio band, and a special type of frequency hopping pattern was included with the specification of the Bluetooth technology to offer the necessity requirement for the matching Radio Frequency RF channels. This paper calculates and evaluates the effect of noise power
jammer and follower jammer on the Personal Area Network (PAN) Bluetooth network. The results prove
that the effect on the Bluetooth network depends on many factors such as power density, distance and
immunity technique, which is used in many Bluetooth networks
Performance Analsis of Clipping Technique for Papr Reduction of MB-OFDM UWB S...ijcisjournal
Multiband Orthogonal Frequency Division Multiplexing (MB-OFDM) is used as efficacious procedure for
ultra-wideband (UWB) wireless communication applications, which divides the spectrum into various subbands,
whose bandwidth is approximately 500MHz. Major arduousness in multiband-OFDM is ,it have
very large peak to average power ratio value which causes the signal to enter into dynamic region that
consequence in the loss of orthogonal properties and results in the interference of the carrier signals which
crops the amplifier saturation and finally limits the capacity of the system. Many PAPR amortize
algorithms have reported in the survey and pre-coding is PAPR reduction which is inserted after
modulation in the OFDM system. The Existing work presents the reduction of that value by different
clipping techniques namely Classical-Clipping (CC), Heavy side-Clipping (HC), Deep-Clipping (DC) and
Smooth-Clipping (SC) and their comparison analysis is done. Every clipping method is best at its own
level .The proficiency of these strategies are evaluated in locutions of average power disparity, complete
system decadence and PAPR reduction. Finally results show the MB OFDM yields better performance to
reduce PAPR in effective way.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
IOSR Journal of Electronics and Communication Engineering(IOSR-JECE) is an open access international journal that provides rapid publication (within a month) of articles in all areas of electronics and communication engineering and its applications. The journal welcomes publications of high quality papers on theoretical developments and practical applications in electronics and communication engineering. Original research papers, state-of-the-art reviews, and high quality technical notes are invited for publications.
Rapid developments in modern wireless communication permit the trade of spectrum scarcity. Higher data rate and wider bandwidth emerge the development in growing demand of wireless communication system. The innovative solution for the spectrum scarcity is cognitive radio (CR). Cognitive radio is the significant technology used to utilize the spectrum effectively. The important aspect of CR is sensing the spectrum band and detects the presence or absence of the primary user in the licensed band. Moreover, another serious issue in next generation (5G) wireless communication is to decide the less complex 5G waveform candidate for achieving higher data rate, low latency and better spectral efficiency. Universal filtered multi-carrier (UFMC) is one of the noticeable waveform candidates for 5G and its applications. In this article, we investigate the spectrum sensing methods in multi-carrier transmission for cognitive radio network applications. Especially, we integrate the sensing algorithm into UFMC transceiver to analyze the spectral efficiency, higher data rates and system complexity. Through the simulation results, we prove that the UFMC based cognitive radio applications outperform the existing Orthogonal Frequency Division Multiplexing (OFDM) based CR applications.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
A simulation study of wi max based communication system using deliberately cl...eSAT Journals
Abstract WiMAX is a highly sophisticated technology in the broadband wireless access communication system. Scalable Orthogonal Frequency Division Multiple Access (OFDMA) is a key technology behind mobile WiMAX and it is also expected to play a key role in 3GPP Long Term Evolution (LTE) standards. Designers and OEMs have to concentrate on flexibility, scalability and stability of the overall Orthogonal Frequency Division Multiplexing (OFDM) system along with its proper data processing and channeling process to achieve high performance and competitiveness. In this paper, the performance of a strictly band limited OFDM signal is examined using deliberate clipping method, one of the simplest signal distortion based way to reduce high Peak to Average Power Ratio (PAPR) and its effect on the resultant Bit Error Rate (BER) against Signal to Noise Ratio (SNR) performance. A simulation program using MATLAB software was developed to investigate performance of OFDM signal by optimization of different parameters such values of FFT size, Cyclic Prefix co-efficient (CPC) and The Voltage Clipping Ratio (VCR). The simulation results show that with the increment of VCR at optimized parameter values of FFT size and CP, the performance of BER vs SNR improves compared to the results found without clipping. Keywords: WiMAX, PAPR, OFDM, CPC, Voltage Clipping Ratio, Deliberately Clipped
A simulation study of wi max based communication system using deliberately cl...eSAT Publishing House
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
International Journal of Engineering Research and DevelopmentIJERD Editor
Electrical, Electronics and Computer Engineering,
Information Engineering and Technology,
Mechanical, Industrial and Manufacturing Engineering,
Automation and Mechatronics Engineering,
Material and Chemical Engineering,
Civil and Architecture Engineering,
Biotechnology and Bio Engineering,
Environmental Engineering,
Petroleum and Mining Engineering,
Marine and Agriculture engineering,
Aerospace Engineering.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
DYNAMIC OPTIMIZATION OF OVERLAP-AND-ADD LENGTH OVER MIMO MBOFDM SYSTEM BASED ...ijwmn
An important role performed by Zero Padding (ZP) in multi-band OFDM (MB-OFDM) System. This role
show for low-complexity in résistance against multipath interference by reducing inter-carrier interference
(ICI) and eliminating the inter-symbol interference (ISI) Also, zero-padded suffix can be used to eliminate
ripples in the power spectral density in order to conform to FCC requirements. At the receiver of MB-OFDM system needs to use of a technique called as overlap-and-add (OLA). Which maintain the circular convolution property and take the multipath energy of the channel.In this paper, we proposed a method of performing overlap-and-add length for zero padded suffixes. Then,we studied the effect of this method, dynamic optimization of overlap-and-add (OLA) equalization, on the performance of MIMO MBOFDM system on Bit Error Rate (BER) with AWGN channel and SalehValenzuela (S-V) Multipath channel Model.In the dynamic optimization OLA, the Length of ZP depends on length of channel impulse response (CIR).
These measures, based on SNR, insert the ZP according to the measurement.Dynamic optimization of length of ZP improves the Performance of MIMO MBOFDM system. In fact wedeveloped a technique to select the length of ZP as function of SNR and CIR estimate. In our simulation
this technique improve to 0.6 dB at BER=10-2 with a multipath channels CM4
DYNAMIC OPTIMIZATION OF OVERLAPAND- ADD LENGTH OVER MBOFDM SYSTEM BASED ON SN...cscpconf
An important role performed by Zero Padding (ZP) in multi-band OFDM (MB-OFDM) System.
This role show for low-complexity in résistance against multipath interference by reducing
inter-carrier interference (ICI) and eliminating the inter-symbol interference (ISI) Also, zeropadded
suffix can be used to eliminate ripples in the power spectral density in order to conform
to FCC requirements.
At the receiver of MB-OFDM system needs to use of a technique called as overlap-and-add
(OLA). Which maintain the circular convolution property and take the multipath energy of the
channel.
In this paper, we proposed a method of performing overlap-and-add length for zero padded
suffixes. Then, we studied the effect of this method, dynamic optimization of overlap-and-add
(OLA) equalization, on the performance of MBOFDM system on Bit Error Rate (BER) with
AWGN channel and Saleh-Valenzuela (S-V) Multipath channel Model.
In the dynamic optimization OLA, the Length of ZP depends on length of channel impulse
response (CIR). These measures, based on SNR, insert the ZP according to the measurement.
Dynamic optimization of length of ZP improves the Performance of MBOFDM system. In fact
we developed a technique to select the length of ZP as function of SNR and CIR
estimate(repetition). In our simulation this technique improve to 3 dB at BER=10-2 with a
multipath channels CM4.
An important role performed by Zero Padding (ZP) in multi-band OFDM (MB-OFDM) System.
This role show for low-complexity in résistance against multipath interference by reducing
inter-carrier interference (ICI) and eliminating the inter-symbol interference (ISI) Also, zeropadded
suffix can be used to eliminate ripples in the power spectral density in order to conform
to FCC requirements.
At the receiver of MB-OFDM system needs to use of a technique called as overlap-and-add
(OLA). Which maintain the circular convolution property and take the multipath energy of the
channel.
In this paper, we proposed a method of performing overlap-and-add length for zero padded
suffixes. Then, we studied the effect of this method, dynamic optimization of overlap-and-add
(OLA) equalization, on the performance of MBOFDM system on Bit Error Rate (BER) with
AWGN channel and Saleh-Valenzuela (S-V) Multipath channel Model.
In the dynamic optimization OLA, the Length of ZP depends on length of channel impulse
response (CIR). These measures, based on SNR, insert the ZP according to the measurement.
Dynamic optimization of length of ZP improves the Performance of MBOFDM system. In fact
we developed a technique to select the length of ZP as function of SNR and CIR
estimate(repetition). In our simulation this technique improve to 3 dB at BER=10-2 with a
multipath channels CM4.
Similar to Analysis of Simulation Parameters of Pulse Shaping FIR Filter for WCDMA (20)
Due to availability of internet and evolution of embedded devices, Internet of things can be useful to contribute in energy domain. The Internet of Things (IoT) will deliver a smarter grid to enable more information and connectivity throughout the infrastructure and to homes. Through the IoT, consumers, manufacturers and utility providers will come across new ways to manage devices and ultimately conserve resources and save money by using smart meters, home gateways, smart plugs and connected appliances. The future smart home, various devices will be able to measure and share their energy consumption, and actively participate in house-wide or building wide energy management systems. This paper discusses the different approaches being taken worldwide to connect the smart grid. Full system solutions can be developed by combining hardware and software to address some of the challenges in building a smarter and more connected smart grid.
A Survey Report on : Security & Challenges in Internet of Thingsijsrd.com
In the era of computing technology, Internet of Things (IoT) devices are now popular in each and every domains like e-governance, e-Health, e-Home, e-Commerce, and e-Trafficking etc. Iot is spreading from small to large applications in all fields like Smart Cities, Smart Grids, Smart Transportation. As on one side IoT provide facilities and services for the society. On the other hand, IoT security is also a crucial issues.IoT security is an area which totally concerned for giving security to connected devices and networks in the IoT .As, IoT is vast area with usability, performance, security, and reliability as a major challenges in it. The growth of the IoT is exponentially increases as driven by market pressures, which proportionally increases the security threats involved in IoT The relationship between the security and billions of devices connecting to the Internet cannot be described with existing mathematical methods. In this paper, we explore the opportunities possible in the IoT with security threats and challenges associated with it.
In today’s emerging world of Internet, each and every thing is supposed to be in connected mode with the help of billions of smart devices. By connecting all the devises used in our day to day life, make our life trouble less and easy. We are incorporated in a world where we are used to have smart phones, smart cars, smart gadgets, smart homes and smart cities. Different institutes and researchers are working for creating a smart world for us but real question which we need to emphasis on is how to make dumb devises talk with uncommon hardware and communication technology. For the same what kind of mechanism to use with various protocols and less human interaction. The purpose is to provide the key area for application of IoT and a platform on which various devices having different mechanism and protocols can communicate with an integrated architecture.
Study on Issues in Managing and Protecting Data of IOTijsrd.com
This paper discusses variety of issues for preserving and managing data produced by IoT. Every second large amount of data are added or updated in the IoT databases across the heterogeneous environment. While managing the data each phase of data processing for IoT data is exigent like storing data, querying, indexing, transaction management and failure handling. We also refer to the problem of data integration and protection as data requires to be fit in single layout and travel securely as they arrive in the pool from diversified sources in different structure. Finally, we confer a standardized pathway to manage and to defend data in consistent manner.
Interactive Technologies for Improving Quality of Education to Build Collabor...ijsrd.com
Today with advancement in Information Communication Technology (ICT) the way the education is being delivered is seeing a paradigm shift from boring classroom lectures to interactive applications such as 2-D and 3-D learning content, animations, live videos, response systems, interactive panels, education games, virtual laboratories and collaborative research (data gathering and analysis) etc. Engineering is emerging with more innovative solutions in the field of education and bringing out their innovative products to improve education delivery. The academic institutes which were once hesitant to use such technology are now looking forward to such innovations. They are adopting the new ways as they are realizing the vast benefits of using such methods and technology. The benefits are better comprehensibility, improved learning efficiency of students, and access to vast knowledge resources, geographical reach, quick feedback, accountability and quality research. This paper focuses on how engineering can leverage the latest technology and build a collaborative learning environment which can then be integrated with the national e-learning grid.
Internet of Things - Paradigm Shift of Future Internet Application for Specia...ijsrd.com
In the world more than 15% people are living with disability that also include children below age of 10 years. Due to lack of independent support services specially abled (handicap) people overly rely on other people for their basic needs, that excludes them from being financially and socially active. The Internet of Things (IoT) can give support system and a better quality of life as well as participation in routine and day to day life. For this purpose, the future solutions for current problems has been introduced in this paper. Daunting challenges have been considered as future research and glimpse of the IoT for specially abled person is given in the paper.
A Study of the Adverse Effects of IoT on Student's Lifeijsrd.com
Internet of things (IoT) is the most powerful invention and if used in the positive direction, internet can prove to be very productive. But, now a days, due to the social networking sites such as Face book, WhatsApp, twitter, hike etc. internet is producing adverse effects on the student life, especially those students studying at college Level. As it is rightly said, something which has some positive effects also has some of the negative effects on the other hand. In this article, we are discussing some adverse effects of IoT on student’s life.
Pedagogy for Effective use of ICT in English Language Learningijsrd.com
The use of information and communications technology (ICT) in education is a relatively new phenomenon and it has been the educational researchers' focus of attention for more than two decades. Educators and researchers examine the challenges of using ICT and think of new ways to integrate ICT into the curriculum. However, there are some barriers for the teachers that prevent them to use ICT in the classroom and develop supporting materials through ICT. The purpose of this study is to examine the high school English teachers’ perceptions of the factors discouraging teachers to use ICT in the classroom.
In recent years usage of private vehicles create urban traffic more and more crowded. As result traffic becomes one of the important problems in big cities in all over the world. Some of the traffic concerns are traffic jam and accidents which have caused a huge waste of time, more fuel consumption and more pollution. Time is very important parameter in routine life. The main problem faced by the people is real time routing. Our solution Virtual Eye will provide the current updates as in the real time scenario of the specific route. This research paper presents smart traffic navigation system, based on Internet of Things, which is featured by low cost, high compatibility, easy to upgrade, to replace traditional traffic management system and the proposed system can improve road traffic tremendously.
Ontological Model of Educational Programs in Computer Science (Bachelor and M...ijsrd.com
In this work there is illustrated an ontological model of educational programs in computer science for bachelor and master degrees in Computer science and for master educational program “Computer science as second competence†by Tempus project PROMIS.
Understanding IoT Management for Smart Refrigeratorijsrd.com
Lately the concept of Internet of Things (IoT) is being more elaborated and devices and databases are proposed thereby to meet the need of an Internet of Things scenario. IoT is being considered to be an integral part of smart house where devices will be connected to each other and also react upon certain environmental input. This will eventually include the home refrigerator, air conditioner, lights, heater and such other home appliances. Therefore, we focus our research on the database part for such an IoT’ fridge which we called as smart Fridge. We describe the potentials achievable through a database for an IoT refrigerator to manage the refrigerator food and also aid the creation of a monthly budget of the house for a family. The paper aims at the data management issue based on a proposed design for an intelligent refrigerator leveraging the sensor technology and the wireless communication technology. The refrigerator which identifies products by reading the barcodes or RFID tags is proposed to order the required products by connecting to the Internet. Thus the goal of this paper is to minimize human interaction to maintain the daily life events.
DESIGN AND ANALYSIS OF DOUBLE WISHBONE SUSPENSION SYSTEM USING FINITE ELEMENT...ijsrd.com
Double wishbone designs allow the engineer to carefully control the motion of the wheel throughout suspension travel. 3-D model of the Lower Wishbone Arm is prepared by using CAD software for modal and stress analysis. The forces and moments are used as the boundary conditions for finite element model of the wishbone arm. By using these boundary conditions static analysis is carried out. Then making the load as a function of time; quasi-static analysis of the wishbone arm is carried out. A finite element based optimization is used to optimize the design of lower wishbone arm. Topology optimization and material optimization techniques are used to optimize lower wishbone arm design.
A Review: Microwave Energy for materials processingijsrd.com
Microwave energy is a latest largest growing technique for material processing. This paper presents a review of microwave technologies used for material processing and its use for industrial applications. Advantages in using microwave energy for processing material include rapid heating, high heating efficiency, heating uniformity and clean energy. The microwave heating has various characteristics and due to which it has been become popular for heating low temperature applications to high temperature applications. In recent years this novel technique has been successfully utilized for the processing of metallic materials. Many researchers have reported microwave energy for sintering, joining and cladding of metallic materials. The aim of this paper is to show the use of microwave energy not only for non-metallic materials but also the metallic materials. The ability to process metals with microwave could assist in the manufacturing of high performance metal parts desired in many industries, for example in automotive and aeronautical industries.
Web Usage Mining: A Survey on User's Navigation Pattern from Web Logsijsrd.com
With an expontial growth of World Wide Web, there are so many information overloaded and it became hard to find out data according to need. Web usage mining is a part of web mining, which deal with automatic discovery of user navigation pattern from web log. This paper presents an overview of web mining and also provide navigation pattern from classification and clustering algorithm for web usage mining. Web usage mining contain three important task namely data preprocessing, pattern discovery and pattern analysis based on discovered pattern. And also contain the comparative study of web mining techniques.
APPLICATION OF STATCOM to IMPROVED DYNAMIC PERFORMANCE OF POWER SYSTEMijsrd.com
Application of FACTS controller called Static Synchronous Compensator STATCOM to improve the performance of power grid with Wind Farms is investigated .The essential feature of the STATCOM is that it has the ability to absorb or inject fastly the reactive power with power grid . Therefore the voltage regulation of the power grid with STATCOM FACTS device is achieved. Moreover restoring the stability of the power system having wind farm after occurring severe disturbance such as faults or wind farm mechanical power variation is obtained with STATCOM controller . The dynamic model of the power system having wind farm controlled by proposed STATCOM is developed . To validate the powerful of the STATCOM FACTS controller, the studied power system is simulated and subjected to different severe disturbances. The results prove the effectiveness of the proposed STATCOM controller in terms of fast damping the power system oscillations and restoring the power system stability.
Making model of dual axis solar tracking with Maximum Power Point Trackingijsrd.com
Now a days solar harvesting is more popular. As the popularity become higher the material quality and solar tracking methods are more improved. There are several factors affecting the solar system. Major influence on solar cell, intensity of source radiation and storage techniques The materials used in solar cell manufacturing limit the efficiency of solar cell. This makes it particularly difficult to make considerable improvements in the performance of the cell, and hence restricts the efficiency of the overall collection process. Therefore, the most attainable maximum power point tracking method of improving the performance of solar power collection is to increase the mean intensity of radiation received from the source used. The purposed of tracking system controls elevation and orientation angles of solar panels such that the panels always maintain perpendicular to the sunlight. The measured variables of our automatic system were compared with those of a fixed angle PV system. As a result of the experiment, the voltage generated by the proposed tracking system has an overall of about 28.11% more than the fixed angle PV system. There are three major approaches for maximizing power extraction in medium and large scale systems. They are sun tracking, maximum power point (MPP) tracking or both.
A REVIEW PAPER ON PERFORMANCE AND EMISSION TEST OF 4 STROKE DIESEL ENGINE USI...ijsrd.com
In day today's relevance, it is mandatory to device the usage of diesel in an economic way. In present scenario, the very low combustion efficiency of CI engine leads to poor performance of engine and produces emission due to incomplete combustion. Study of research papers is focused on the improvement in efficiency of the engine and reduction in emissions by adding ethanol in a diesel with different blends like 5%, 10%, 15%, 20%, 25% and 30% by volume. The performance and emission characteristics of the engine are tested observed using blended fuels and comparative assessment is done with the performance and emission characteristics of engine using pure diesel.
Study and Review on Various Current Comparatorsijsrd.com
This paper presents study and review on various current comparators. It also describes low voltage current comparator using flipped voltage follower (FVF) to obtain the single supply voltage. This circuit has short propagation delay and occupies a small chip area as compare to other current comparators. The results of this circuit has obtained using PSpice simulator for 0.18 μm CMOS technology and a comparison has been performed with its non FVF counterpart to contrast its effectiveness, simplicity, compactness and low power consumption.
Reducing Silicon Real Estate and Switching Activity Using Low Power Test Patt...ijsrd.com
Power dissipation is a challenging problem for today's system-on-chip design and test. This paper presents a novel architecture which generates the test patterns with reduced switching activities; it has the advantage of low test power and low hardware overhead. The proposed LP-TPG (test pattern generator) structure consists of modified low power linear feedback shift register (LP-LFSR), m-bit counter, gray counter, NOR-gate structure and XOR-array. The seed generated from LP-LFSR is EXCLUSIVE-OR ed with the data generated from gray code generator. The XOR result of the sequence is single input changing (SIC) sequence, in turn reduces the switching activity and so power dissipation will be very less. The proposed architecture is simulated using Modelsim and synthesized using Xilinx ISE9.2.The Xilinx chip scope tool will be used to test the logic running on FPGA.
Defending Reactive Jammers in WSN using a Trigger Identification Service.ijsrd.com
In the last decade, the greatest threat to the wireless sensor network has been Reactive Jamming Attack because it is difficult to be disclosed and defend as well as due to its mass destruction to legitimate sensor communications. As discussed above about the Reactive Jammers Nodes, a new scheme to deactivate them efficiently is by identifying all trigger nodes, where transmissions invoke the jammer nodes, which has been proposed and developed. Due to this identification mechanism, many existing reactive jamming defending schemes can be benefited. This Trigger Identification can also work as an application layer .In this paper, on one side we provide the several optimization problems to provide complete trigger identification service framework for unreliable wireless sensor networks and on the other side we also provide an improved algorithm with regard to two sophisticated jamming models, in order to enhance its robustness for various network scenarios.
TECHNICAL TRAINING MANUAL GENERAL FAMILIARIZATION COURSEDuvanRamosGarzon1
AIRCRAFT GENERAL
The Single Aisle is the most advanced family aircraft in service today, with fly-by-wire flight controls.
The A318, A319, A320 and A321 are twin-engine subsonic medium range aircraft.
The family offers a choice of engines
Automobile Management System Project Report.pdfKamal Acharya
The proposed project is developed to manage the automobile in the automobile dealer company. The main module in this project is login, automobile management, customer management, sales, complaints and reports. The first module is the login. The automobile showroom owner should login to the project for usage. The username and password are verified and if it is correct, next form opens. If the username and password are not correct, it shows the error message.
When a customer search for a automobile, if the automobile is available, they will be taken to a page that shows the details of the automobile including automobile name, automobile ID, quantity, price etc. “Automobile Management System” is useful for maintaining automobiles, customers effectively and hence helps for establishing good relation between customer and automobile organization. It contains various customized modules for effectively maintaining automobiles and stock information accurately and safely.
When the automobile is sold to the customer, stock will be reduced automatically. When a new purchase is made, stock will be increased automatically. While selecting automobiles for sale, the proposed software will automatically check for total number of available stock of that particular item, if the total stock of that particular item is less than 5, software will notify the user to purchase the particular item.
Also when the user tries to sale items which are not in stock, the system will prompt the user that the stock is not enough. Customers of this system can search for a automobile; can purchase a automobile easily by selecting fast. On the other hand the stock of automobiles can be maintained perfectly by the automobile shop manager overcoming the drawbacks of existing system.
Explore the innovative world of trenchless pipe repair with our comprehensive guide, "The Benefits and Techniques of Trenchless Pipe Repair." This document delves into the modern methods of repairing underground pipes without the need for extensive excavation, highlighting the numerous advantages and the latest techniques used in the industry.
Learn about the cost savings, reduced environmental impact, and minimal disruption associated with trenchless technology. Discover detailed explanations of popular techniques such as pipe bursting, cured-in-place pipe (CIPP) lining, and directional drilling. Understand how these methods can be applied to various types of infrastructure, from residential plumbing to large-scale municipal systems.
Ideal for homeowners, contractors, engineers, and anyone interested in modern plumbing solutions, this guide provides valuable insights into why trenchless pipe repair is becoming the preferred choice for pipe rehabilitation. Stay informed about the latest advancements and best practices in the field.
Cosmetic shop management system project report.pdfKamal Acharya
Buying new cosmetic products is difficult. It can even be scary for those who have sensitive skin and are prone to skin trouble. The information needed to alleviate this problem is on the back of each product, but it's thought to interpret those ingredient lists unless you have a background in chemistry.
Instead of buying and hoping for the best, we can use data science to help us predict which products may be good fits for us. It includes various function programs to do the above mentioned tasks.
Data file handling has been effectively used in the program.
The automated cosmetic shop management system should deal with the automation of general workflow and administration process of the shop. The main processes of the system focus on customer's request where the system is able to search the most appropriate products and deliver it to the customers. It should help the employees to quickly identify the list of cosmetic product that have reached the minimum quantity and also keep a track of expired date for each cosmetic product. It should help the employees to find the rack number in which the product is placed.It is also Faster and more efficient way.
Event Management System Vb Net Project Report.pdfKamal Acharya
In present era, the scopes of information technology growing with a very fast .We do not see any are untouched from this industry. The scope of information technology has become wider includes: Business and industry. Household Business, Communication, Education, Entertainment, Science, Medicine, Engineering, Distance Learning, Weather Forecasting. Carrier Searching and so on.
My project named “Event Management System” is software that store and maintained all events coordinated in college. It also helpful to print related reports. My project will help to record the events coordinated by faculties with their Name, Event subject, date & details in an efficient & effective ways.
In my system we have to make a system by which a user can record all events coordinated by a particular faculty. In our proposed system some more featured are added which differs it from the existing system such as security.
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...Dr.Costas Sachpazis
Terzaghi's soil bearing capacity theory, developed by Karl Terzaghi, is a fundamental principle in geotechnical engineering used to determine the bearing capacity of shallow foundations. This theory provides a method to calculate the ultimate bearing capacity of soil, which is the maximum load per unit area that the soil can support without undergoing shear failure. The Calculation HTML Code included.
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)MdTanvirMahtab2
This presentation is about the working procedure of Shahjalal Fertilizer Company Limited (SFCL). A Govt. owned Company of Bangladesh Chemical Industries Corporation under Ministry of Industries.
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Courier management system project report.pdfKamal Acharya
It is now-a-days very important for the people to send or receive articles like imported furniture, electronic items, gifts, business goods and the like. People depend vastly on different transport systems which mostly use the manual way of receiving and delivering the articles. There is no way to track the articles till they are received and there is no way to let the customer know what happened in transit, once he booked some articles. In such a situation, we need a system which completely computerizes the cargo activities including time to time tracking of the articles sent. This need is fulfilled by Courier Management System software which is online software for the cargo management people that enables them to receive the goods from a source and send them to a required destination and track their status from time to time.
Democratizing Fuzzing at Scale by Abhishek Aryaabh.arya
Presented at NUS: Fuzzing and Software Security Summer School 2024
This keynote talks about the democratization of fuzzing at scale, highlighting the collaboration between open source communities, academia, and industry to advance the field of fuzzing. It delves into the history of fuzzing, the development of scalable fuzzing platforms, and the empowerment of community-driven research. The talk will further discuss recent advancements leveraging AI/ML and offer insights into the future evolution of the fuzzing landscape.
Analysis of Simulation Parameters of Pulse Shaping FIR Filter for WCDMA
1. IJSRD - International Journal for Scientific Research & Development| Vol. 1, Issue 7, 2013 | ISSN (online): 2321-0613
All rights reserved by www.ijsrd.com 1481
Abstract-- The application of signal processing techniques to
wireless communications is an emerging area that has
recently achieved dramatic improvement in results and holds
the potential for even greater results in the future as an
increasing number of researchers from the signal process
and communications areas participate in this expanding
field. From an industrial viewpoint also, the advanced signal
processing technology cannot only dramatically increase the
wireless system capacity but can also improve the
communication quality including the reduction of all types
of interference. The present paper deals with simulation
model of square root raised cosine pulse shaping filter for
WCDMA with different parameters of the filter at
5Mhz.The present paper deals with study of Simulation
Parameters (Number of Bits, Number of Errors) of Pulse
Shaping FIR Filter at different value of group delay(2,4,6,8)
to the calculate BER for WCDMA.
Keyword: Wide band code division multiplexing
(WCDMA), Finite impulse response (FIR).
I. INTRODUCTION
The First Generation (1G) and Second Generation (2G) of
mobile telephony were indented for voice transmission. The
Third Generation (3G) is meant for both voice and data
applications. The thirst for effective communication and
higher bandwidth has led to the evolution of the next
generation wireless systems, and newer technologies are
being deployed to provide the user with information and
entertainment anywhere and anytime [2]. The third
generation mobile radio systems (IMT-2000 globally and
UMTS in Europe) are becoming a reality today. The
network infrastructure is currently being deployed in many
countries. Manufacturers, network operators and service
providers are now focusing on the development of new
services and applications as well as suitable business models
to make third generation mobile communication an
economic success. One important lesson to be learnt from
the development of 3G is that the potential future services
and applications, including the expected user behavior
should be taken into account from the very beginning to
derive the technical requirements. This approach is essential
to enable the economic success of future system [2].
Wideband Code-division multiple access is one of several
methods of multiplexing wireless users. In CDMA, users are
multiplexed by distinct codes rather than by orthogonal
frequency bands, as in frequency-division multiple access.
The enhancement in performance is obtained from a Direct
Sequence Spread Spectrum (DSSS) signal through the
processing gain and the coding gain can be used to enable
many DSSS signals to occupy the same channel bandwidth,
provided that each signal has its own pseudorandom
(signature) sequence. Thus enable several users to transmit
their information over the same channel bandwidth. This is
the main concept of a WCDMA communication system. The
signal detection is accomplished at the receiver side by
knowing the code sequence or signature of the desired user.
Since the bandwidth of the code signal is chosen to be much
larger than the bandwidth of the information-bearing signal,
the encoding process enlarges or spreads the spectrum of the
signal. Therefore, it is also known as spread spectrum
modulation. The resulting signal is also called a spread-
spectrum signal, and CDMA is often denoted as spread-
spectrum multiple access. A tradeoff exists between
bandwidth containment in frequency domain and ripple
attenuation in time domain. It is this tradeoff of bandwidth
containment versus ripple amplitude which must be
considered by design engineers, when developing a data
transmission system that employs pulse shaping.
II. PROBLEM IDENTIFICATION
In communications systems, two important requirements of
a wireless communications channel demand the use of a
pulse shaping filter. These requirements are:
1. Generating band limited channels
2. Reducing inter symbol interference
Both requirements can be accomplished by a pulse shaping
filter which is applied to each symbol. In fact, the sync
pulse, shown below, meets both of these requirements
because it efficiently utilizes the frequency domain to utilize
a smaller portion of the frequency domain, and because of
the windowing affect that it has on each symbol period of a
modulated signal.
The rapidly increasing popularity of mobile radio services
has created a series of technological challenges. One of this
is the need for power and spectrally efficient modulation
schemes to meet the spectral requirements of mobile
communications. Linear modulation methods such as QAM
and QPSK have received much attention to their inherent
high spectral efficiency However for the efficient
amplification of transmitted signal, the Radio Frequency
Amplifier is normally operated near the saturation region
and therefore exhibit nonlinear behavior. As a result
significant spectral spreading occurs, when a signal with
large envelope variations propagates through such an
amplifier and creates large envelope fluctuations. Pulse
shaping plays a crucial role in spectral shaping in the
modern wireless communication to reduce the spectral
bandwidth.
Pulse shaping is a spectral processing technique by which
fractional out of band power is reduced for low cost,
reliable, power and spectrally efficient mobile radio
communication systems. It is clear that the pulse shaping
filter not only reduces inter symbol interference (ISI), but it
also reduces adjacent channel interference. To satisfy the
Analysis of Simulation Parameters of Pulse
Shaping FIR Filter for WCDMA
Yogita Bhimwani1
Prof. Sandeep Agrawal2
1
Research Scholar 2
Dean Academics
1,2
M.I.T, Ujjain
2. Analysis of Simulation Parameters of Pulse Shaping FIR Filter for WCDMA
(IJSRD/Vol. 1/Issue 7/2013/0026)
All rights reserved by www.ijsrd.com 1482
ever increasing demands for higher data rates as well as to
allow more users to simultaneously access the network,
interest has peaked in what has come to be known as
wideband code division multiple access (WCDMA).The
basic characteristics of WCDMA waveforms that make
them attractive for high data rate transmissions are their
advantages over other wireless systems. It emphasizes that
how the choice of spread bandwidth affects the bit error rate
of system.
Code-division multiple access is one of several methods of
multiplexing wireless users. In CDMA, users are
multiplexed by distinct codes rather than by orthogonal
frequency bands, as in frequency-division multiple access.
The enhancement in performance obtained from a direct
sequence spread spectrum (DSSS) signal through the
processing gain and the coding gain can be used to enable
many DSSS signals to occupy the same channel bandwidth,
provided that each signal has its own pseudorandom
(signature) sequence. Thus enable several users to transmit
there information over the same channel bandwidth. This is
the main concept of a CDMA communication system. The
signal detection is accomplished at the receiver side by
knowing the code sequence or signature of the desired user.
Since the bandwidth of the code signal is chosen to be much
larger than the bandwidth of the information-bearing signal,
the encoding process enlarges or spreads the spectrum of the
signal. Therefore, it is also known as spread spectrum
modulation. The resulting signal is also called a spread-
spectrum signal, and CDMA is often denoted as spread-
spectrum multiple access. The processing gain factor is
defined as the ratio of the transmitted bandwidth to
information bandwidth and is given by:
⁄
Correlating the received signal with a code signal from a
certain user will then only dispread the signal of this user,
while the other spread-spectrum signals will remain spread
over a large bandwidth.
III. PROPOSED METHODOLOGY
Under this chapter we will describe the methodology and the
algorithms which we have used in this project:
1. Filter Design Techniques: A FIR filter are filters having a
transfer function of a polynomial in z and is an all-zero filter
in the sense that the zeroes in the z-plane determine the
frequency response magnitude characteristic. The Z
transform of an N-point FIR filter is given by Eq. 1.
H (Z) = ∑ (1)
FIR filters are particularly useful for applications where
exact linear phase response is required. The FIR filter is
generally implemented in a non-recursive way which
guarantees a stable filter. FIR filter design essentially
consists of two parts.
1 Approximation problem
2 Realization problem
The approximation stage takes the specification and gives a
transfer function through four steps:
1 A desired or ideal response is chosen, usually in the
frequency domain.
2 An allowed class of filters is chosen (e.g. the length
N for a FIR filters).
3 A measure of the quality of approximation is
chosen.
4 A method or algorithm is selected to find the best
filter transfer function.
A. Frequency Sampling Technique:
In this method the desired frequency response is provided.
The given frequency response is sampled at a set of equally
spaced frequencies to obtain N samples. Thus, sampling the
continuous frequency response (w) at Npoints essentially
gives us the N-point DFT of (2Пnk/N). Thus by using the
IDFT formula, the filter coefficients can be calculated as
h (n) = ∑ (2)
Now using the above N-point filter response, the continuous
frequency response is calculated as an interpolation of the
sampled frequency response. The approximation error
would then be exactly zero at the sampling frequencies and
would be finite in frequencies between them. The smoother
the frequency response being approximated, the smaller will
be the error of interpolation between the sample points. One
way to reduce the error is to increase the number of
frequency samples.
2. Nyquist Filters: Nyquist defined a type of filters which
have good time domain properties and good frequency
domain properties. Nyquist filters results in zero ISI at the
optimum sampling points for the filtered data. A practical
example of Nyquist filter is raised cosine filter.
2.1Raised Cosine Filter: Raised cosine filters are commonly
used in digital data communication systems to limit inter
symbol interference. The impulse response of a raised
cosine filter is zero at each adjacent symbol period.
Specifying a raised cosine filter is straight-forward, and
requires only the "roll off factor" (often called "beta" or
"alpha"), the sample rate, the symbol rate, and the number of
FIR taps. The ideal raised cosine filter frequency response
consists of unity gain at low frequencies, a raised cosine
function in the middle, and total attenuation at high
frequencies. The width of the middle frequencies are defined
by the roll off factor constant Alpha, (0<Alpha<=1). In filter
solutions, the pass band frequency is defined as the 50%
signal attenuation point. The group delay must remain
constant at least out to 15 to 20 dB of attenuation. When the
pass band frequency of a raised cosine filter is set to half the
data rate, then the impulse response of Nyquist first criteria
is satisfied in that the impulse response is zero for T = NTs,
where N is an integer, and T is the data period[17].
The ideal raised cosine filter frequency response is shown
Below:
Figure 1.Ideal raised cosine frequency response [18].
3. Analysis of Simulation Parameters of Pulse Shaping FIR Filter for WCDMA
(IJSRD/Vol. 1/Issue 7/2013/0026)
All rights reserved by www.ijsrd.com 1483
IV. PROBLEM FORMULATION
1 It is also observed that BER decreases as the group
delay is increased from 2 to 4 and then from 4 to 6.
The BER is found to increase as the value of group
delay D is varied from 6 to 8 .Hence the group
delay should be controlled at D = 6.
2 Another parameter which affects the performance
of FIR filter is the Roll of factor.
3 So the proposed work deals with the points stated
below:
a) Verification of the value of Group Delay for
FIR filters.
b) Find the optimum value of Roll of factor for
the best value of “D”.
c) Reducing the BER of the system.
V. PROPOSED WORK
Fig. 2.Block diagram for WCDMA System
VI. SIMULATION MODEL FOR WCDMA
Fig. 3: WCDMA based Simulation Model developed for
Square Root Raised Cosine Pulse
The WCDMA communication link proposed in this section.
The performance in terms of the Bits Error Rate can be
examined for different values of Group Delay D of the pulse
shaping filter against a sinusoidal interference. A Simulink
model based on the MATLAB will provide the output. The
information signal in wideband CDMA system is generated
by Bernoulli Binary Generator and the PN sequence is used
for spreading the signal at 5 MHz bandwidth. This signal are
passed from different parameters block as shown in figure 1
and at the end BER is calculated by comparing the
transmitted data and received data.
A. Description of Different Element Blocks used in making
WCDMA Simulation Model
1) Bernoulli Binary Generator
Bernoulli Binary Generator is used to generate information
signal appropriate with the standard for WCDMA from
simulink library. Bernoulli Binary Generator block as shown
in figure generates random binary numbers using Bernoulli
distribution. The Bernoulli distribution has mean value 1-p
and variance p (1-p).
Fig. 4: Parameters of Bernoulli Binary generator
2) PN Sequence Generator
The PN Sequence is produced by pseudo random noise
generator that is simply a binary linear feedback shift
register consisting of XOR gates and a shift register. This
PN Sequence has the ability to create an identical sequence
for both transmitter and receiver and yet retaining the
desirable properties of a noise like randomness bit sequence.
In Direct Sequence Spread Spectrum System, to generate a
chip rate of 3.84Mbps for 5 MHz bandwidth in WCDMA
system PN Sequence Generator has been used.
3) XOR Logical Operator
For single input operators are applied across input vector.
For multiple inputs operators are applied across inputs.
4) Data Type Conversion Block
It converts input to data type and scaling of output. This
conversion has two possible goals. One goal is to have real
world values of input and output be equal. Other goal is to
have stored integer values of input and output be equal.
Overflows and Quantization errors can prevent goal from
being fully achieved.
5) Differential Encoder
It differentially encodes the input data. The output of this
block is a logical difference between present input to this
block and previous output of this block. The input can be a
scalar, vector or frame based matrix.
6) Modulator baseband
It modulates the input signal using the offset quadrature
4. Analysis of Simulation Parameters of Pulse Shaping FIR Filter for WCDMA
(IJSRD/Vol. 1/Issue 7/2013/0026)
All rights reserved by www.ijsrd.com 1484
Phase shift keying method. The input can be either bits or
integers. For sample based integer input, input must be a
scalar. For frame based integer input, input must be a
column vector. In case of sample based input, output sample
time equals symbol period divided by 2. There are different
variants such as QPSK, orthogonal QPSK (OQPSK).
7) Square Root Raised Cosine Transmit Filter
It up samples and filters the input signal. The group delay is
specified as the number of symbol periods between start of
filter response and its peak. This delay also determines the
length of filter impulse response which is 1+2*N*Group
Delay. Various parameters of Square Root Raised Cosine
Transmit Filter are shown in fig. 5 below.
8) Discrete Time Eye Diagram Scope
It displays the multiple traces of modulated signal to reveal
the modulation characteristics such as pulse shaping as well
as channel distortions of signal.
9) Discrete Time Eye Diagram Scope
It displays the multiple traces of modulated signal to reveal
the modulation characteristics such as pulse shaping as well
as channel distortions of signal.
10) DB Gain
Here we apply the amplitude gain specified in dB. Here 5dB
and 10 dB gain have been taken in present study for
subsequent analysis.
11) Gaussian Noise generator
It generates the Gaussian distributed noise with given mean
and variance values.
Fig. 5: Parameters of Square Root Raised Cosine Transmit
Filter
12) AWGN Channel
It adds white Gaussian noise to the input signal. The input
and output signals can be real or complex. This block
supports multichannel input and output signals as well as
frame based processing. Here in AWGN channel block, we
can change Eb/No from 5dB to 10dB. Fig. 6 shows the
function block parameters of AWGN channel.
Fig. 6: Parameters of AWGN Channel
VII. RESULTS AND DISCUSSION
The simulation study has also been carried out for different
values of D i.e.2, 4, 6 and 8. The simulation results for BER
along with the number of errors and number of bits in each
frame have been obtained and are summarized in tables 1,
2, 3, 4.
A. Simulation result for evaluation on BER vs. Roll of
factor for WCDMA channel for 1 user when the number of
data is 1000 at Delay=6.
S.no. Roll of Factor Bit Error Rate(BER)
1 0.1000 0.5150
2 0.2300 0.5080
3 0.3000 0.5160
4 0.4200 0.5020
5 0.5500 0.5130
6 0.6000 0.5200
7 0.7400 0.5140
8 0.8500 0.5190
9 0.9800 0.5080
Table. 1: Simulation result for evaluation on BER vs. Roll
of factor
OUTPUT:
Fig. 7: Simulation result for evaluation on BER vs. Roll of
factor
5. Analysis of Simulation Parameters of Pulse Shaping FIR Filter for WCDMA
(IJSRD/Vol. 1/Issue 7/2013/0026)
All rights reserved by www.ijsrd.com 1485
B. Simulation result for evaluation on BER vs. Roll of factor
for WCDMA channel for 1 user when the number of data is
10,000 at Delay=6.
OUTPUT:
Fig. 8: Simulation result for evaluation on BER vs. Roll of
factor
S.no. Roll of Factor Bit Error Rate(BER)
1 0.1000 0.5081
2 0.2300 0.5044
3 0.3000 0.5069
4 0.4200 0.5012
5 0.5500 0.5044
6 0.6000 0.5050
7 0.7400 0.5049
8 0.8500 0.5025
9 0.9800 0.5013
Table. 2: Simulation result for evaluation on BER vs. Roll
of factor
REFERENCES
[1] J. M. Holtzman, “ A Simple, Accurate Method to
Calculate Spread-Spectrum Multiple-Access Error
Probabilities,” IEEE Trans. Communication, vol. 40,
pp. 461- 464, Mar.1992.
[2] Victor Wen-Kai Cheng, Wayne E. Stark, “ Adaptive
Coding and Modulation for Spread Spectrum”, IEEE
Journal, 1997.
[3] Troels E. Kolding, Frank Frederickson, Preben E.
Mogensen, “Performance Aspects of WCDMA
Systems with High Speed Downlink Packet Access
(HSDPA)”, Nokia Network R&D, Denmark, 2003
[4] Min-yan Song, Yang Xiao, Joachim Habermann,
“High Data Rate Wireless System”, IEEE, pp. 1344-
1350.
[5] Y. Rosmansyah, P. Sweeney, R. Tafazolli, “Air-
Interface Techniques for Achieving High Data Rates
for UMTS”, IEEE 3G Mobile Communication
Technologies, Conference Publication No. 477, pp.
368-372, 26-28 March 2001.
[6] A.S. Madhukumar, Francois Chin, “An Efficient
Method for High-rate Data Transmission using
Residue Number System based DS-CDMA”, IEEE.
[7] Min-yan Song, Yang Xiao, Joachim Habermann,
“High Data Rate Wireless System”, IEEE, pp. 1344-
1350.
[8] Haifeng Wang, Zhenhong Li, “ Novel Soft-bit
Demodulator with Multi-dimensional Projection for
High-order Modulation”, IEEE, pp. 2051-2054, 2002.
[9] Troels Emil Kolding, Klaus in gemann Pedersen,
Jeroen Wigard, Frank Frederickson, Preben Elgaard.
Mogensen, “High Speed Downlink Packet Access
(HSDPA): W-CDMA Evolution”, IEEE Vehicular
Technology Society News, February, 2003.
[10] E. Hossain, T. Issariyakul, “Performance bound of
dynamic forward link adaptation in Cellular W-
CDMA networks using high-order modulation and
multicode formats”, IEEE Electronics Letters,
Vol.40, No. 2, January 2004.
[11] Bernard Sklar, "Digital Communications:
Fundamentals and Applications", Prentice-Hall, 2nd
Edition, pp. 30-33.
[12] Julian Cheng, Norman C. Beaulieu, “Accurate DS-
CDMA Bit-Error Probability Calculation in Rayleigh
Fading”, IEEE Transactions on Wireless
Communications, Vol. 1, No. 1, January 2002.
[13] Michael B. Pursley, “Performance Evaluation for
Phase-Coded Spread-Spectrum Multiple-Access
Communication-Part 1: System Analysis”, IEEE
Transaction on Communications, Vol. Com-25, No.
8, August 1977.
[14] Michael B. Pursley, “Performance Evaluation for
Phase-Coded Spread-Spectrum Multiple-Access
Communication-Part 2: Code Sequence Analysis”,
IEEE Transaction on Communications, Vol. Com-25,
No. 8, August 1977.
[15] Dong In Kim, Ekram Hossain, Vijay K. Bhargava,
“Dynamic Rate and Power Adaptation for Forward
Link Transmission Using High-Order Modulation
and Multimode Formats in Cellular W-CDMA
Network”, IEEE Journal, 2003.
[16] H. Harada & R. Prasad, Simulation and Software
Radio for Mobile Communications, Artech House,
2nd Edition, 2002.
[17] T. J. Moulsley, “ Throughput of High Speed
Downlink Packet Access for UMTS”, Phillips
Research Laboratories, 2002.
[18] Troels E. Kolding, Frank Frederickson, and Preben E.
Mogensen, “Performance Aspects of W-CDMA
Systems with High Speed Downlink Packet Access
(HSDPA)”,Nokia Networks, Aalborg R&D,
Denmark, 2002.
[19] International Commission on Non-Ionizing Radiation
Protection (ICNIRP), “Guidelines for limiting
exposure to time-varying electric, magnetic, and
electromagnetic fields (up to 300 GHz),” Health
Phys., vol. 74, no. 4, pp. 494–594, Apr. 1998.