This document presents a simulation-based dynamic traffic assignment model for an urban transportation network with multiple transportation modes. The model uses a mesoscopic simulation approach with separate modules for vehicle movement simulation and time-dependent demand simulation. It considers four transportation modes (private car, bus, subway, bicycle) and allows travelers to choose between modes and routes based on travel time and costs. The model is tested using a case study area in Beijing to evaluate its performance under different scenarios like changes in demand levels, bus frequencies, parking fees, and information provision.
A Review on Road Traffic Models for Intelligent Transportation System (ITS)IJSRD
Traffic flow models seek to describe the interaction of vehicles with their drivers and the infrastructure. Almost all the models directly or indirectly characterize the relationship among the traffic variables: the position, the speed, the flow, and the density of vehicles. These relationships can be based on either the behavior of individual vehicles in a traffic network in relation to the dynamics of other vehicles, the overall characteristics of the flow of vehicles in a traffic network, or a combination of the behavior of individual vehicles in a traffic network and the overall traffic flow characteristics. This paper describes the different models for automatic Traffic control system.
IMPORTANCE OF REALISTIC MOBILITY MODELS FOR VANET NETWORK SIMULATIONIJCNCJournal
In the performance evaluation of a protocol for a vehicular ad hoc network, the protocol should be tested under a realistic conditions including, representative data traffic models, and realistic movements of the mobile nodes which are the vehicles (i.e., a mobility model). This work is a comparative study between two mobility models that are used in the simulations of vehicular networks, i.e., MOVE (MObility model generator for VEhicular networks) and CityMob, a mobility pattern generator for VANET. We describe several mobility models for VANET simulations.
In this paper we aim to show that the mobility models can significantly affect the simulation results in VANET networks. The results presented in this article prove the importance of choosing a suitable real world scenario for performances studies of routing protocols in this kind of network.
A Dynamic Vehicular Traffic Control Using Ant Colony And Traffic Light Optimi...Kristen Carter
This document proposes a dynamic vehicular traffic control system using ant colony optimization and optimized traffic lights. It aims to reduce traffic congestion in urban areas. The system divides the road network into cells and uses artificial ants to guide vehicles along the least congested paths within each cell. It also proposes a new method for optimizing traffic light timing at intersections based on real-time vehicle count data collected from vehicles and traffic lights using VANET technology. Simulation results using the DIVERT simulator show that the proposed traffic light optimization method improves average vehicle speed and reduces waiting times and stopped vehicles at intersections compared to a system with usual fixed-duration traffic lights.
1
Intermodal Autonomous Mobility-on-Demand
Mauro Salazar1,2, Nicolas Lanzetti1,2, Federico Rossi2, Maximilian Schiffer2,3, and Marco Pavone2
Abstract—In this paper we study models and coordination poli-
cies for intermodal Autonomous Mobility-on-Demand (AMoD),
wherein a fleet of self-driving vehicles provides on-demand
mobility jointly with public transit. Specifically, we first present
a network flow model for intermodal AMoD, where we capture
the coupling between AMoD and public transit and the goal is
to maximize social welfare. Second, leveraging such a model,
we design a pricing and tolling scheme that allows the system
to recover a social optimum under the assumption of a perfect
market with selfish agents. Third, we present real-world case
studies for the transportation networks of New York City and
Berlin, which allow us to quantify the general benefits of
intermodal AMoD, as well as the societal impact of different
vehicles. In particular, we show that vehicle size and powertrain
type heavily affect intermodal routing decisions and, thus, system
efficiency. Our studies reveal that the cooperation between AMoD
fleets and public transit can yield significant benefits compared
to an AMoD system operating in isolation, whilst our proposed
tolling policies appear to be in line with recent discussions for
the case of New York City.
I. INTRODUCTION
TRAFFIC congestion is soaring all around the world. Besidesmere discomfort for passengers, congestion causes severe
economic and environmental harm, e.g., due to the loss of
working hours and pollutant emissions such as CO2, partic-
ulate matter, and NOx [1]. In 2013, traffic congestion cost
U.S. citizens 124 Billion USD [2]. Notably, transportation
remains one of a few sectors in which emissions are still
increasing [3]. Governments and municipalities are struggling
to find sustainable ways of transportation that can match
mobility needs and reduce environmental harm as well as
congestion.
To achieve sustainable modes of transportation, new mobil-
ity concepts and technology changes are necessary. However,
the potential to realize such concepts in urban environments is
limited, since upgrades to available infrastructures (e.g., roads
and subway lines) and their capacity are often extremely costly
and require decades-long planning timelines. Thus, mobility
concepts that use existing infrastructure in a more efficient way
are especially attractive. In this course, mobility-on-demand
services appear to be particularly promising. Herein, two main
concepts exist. On the one hand, free floating car sharing
systems strive to reduce the total number of private vehicles
in city centers. However, these systems offer limited flexibility
and are generally characterized by low adoption rates that
result from low vehicle availabilities due to the difficulty of
1Institute for Dynamic Systems and Control ETH Zürich, Zurich (ZH),
Switzerland {samauro,lnicolas}@ethz.ch
2Department of Aeronautics and Astro.
Motorcycle Movement Model Based on Markov Chain Process in Mixed TrafficIJECEIAES
Mixed traffic systems are dynamically complex since there are many parameters and variables that influence the interactions between the different kinds of vehicles. Modeling the behavior of vehicles, especially motorcycle which has erratic behavior is still being developed continuously, especially in developing countries which have heterogeneous traffic. To get a better understanding of motorcycle behavior, one can look at maneuvers performed by drivers. In this research, we tried to build a model of motorcycle movement which only focused on maneuver action to avoid the obstacle along with the trajectories using a Markov Chain approach. In Markov Chain, the maneuver of motorcycle will described by state transition. The state transition model is depend on probability function which will use for determine what action will be executed next. The maneuver of motorcycle using Markov Chain model was validated by comparing the analytical result with the naturalistic data, with similarity is calculated using MSE. In order to know how good our proposed method can describe the maneuver of motorcycle, we try to compare the MSE of the trajectory based on Markov Chain model with those using polynomial approach. The MSE results showed the performance of Markov Chain Model give the smallest MSE which 0.7666 about 0.24 better than 4 order polynomial.
Traffic Congestion Prediction using Deep Reinforcement Learning in Vehicular ...IJCNCJournal
In recent years, a new wireless network called vehicular ad-hoc network (VANET), has become a popular research topic. VANET allows communication among vehicles and with roadside units by providing information to each other, such as vehicle velocity, location and direction. In general, when many vehicles likely to use the common route to proceed to the same destination, it can lead to a congested route that should be avoided. It may be better if vehicles are able to predict accurately the traffic congestion and then avoid it. Therefore, in this work, the deep reinforcement learning in VANET to enhance the ability to predict traffic congestion on the roads is proposed. Furthermore, different types of neural networks namely Convolutional Neural Network (CNN), Multilayer Perceptron (MLP) and Long Short-Term Memory (LSTM) are investigated and compared in this deep reinforcement learning model to discover the most effective one. Our proposed method is tested by simulation. The traffic scenarios are created using traffic simulator called Simulation of Urban Mobility (SUMO) before integrating with deep reinforcement learning model. The simulation procedures, as well as the programming used, are described in detail. The performance of our proposed method is evaluated using two metrics; the average travelling time delay and average waiting time delay of vehicles. According to the simulation results, the average travelling time delay and average waiting time delay are gradually improved over the multiple runs, since our proposed method receives feedback from the environment. In addition, the results without and with three different deep learning algorithms, i.e., CNN, MLP and LSTM are compared. It is obvious that the deep reinforcement learning model works effectively when traffic density is neither too high nor too low. In addition, it can be concluded that the effective algorithms for traffic congestion prediction models in descending order are MLP, CNN, and LSTM, respectively.
TRAFFIC CONGESTION PREDICTION USING DEEP REINFORCEMENT LEARNING IN VEHICULAR ...IJCNCJournal
In recent years, a new wireless network called vehicular ad-hoc network (VANET), has become a popular research topic. VANET allows communication among vehicles and with roadside units by providing information to each other, such as vehicle velocity, location and direction. In general, when many vehicles likely to use the common route to proceed to the same destination, it can lead to a congested route that should be avoided. It may be better if vehicles are able to predict accurately the traffic congestion and then avoid it. Therefore, in this work, the deep reinforcement learning in VANET to enhance the ability to predict traffic congestion on the roads is proposed. Furthermore, different types of neural networks namely Convolutional Neural Network (CNN), Multilayer Perceptron (MLP) and Long Short-Term Memory (LSTM) are investigated and compared in this deep reinforcement learning model to discover the most effective one. Our proposed method is tested by simulation. The traffic scenarios are created using traffic simulator called Simulation of Urban Mobility (SUMO) before integrating with deep reinforcement learning model. The simulation procedures, as well as the programming used, are described in detail. The performance of our proposed method is evaluated using two metrics; the average travelling time delay and average waiting time delay of vehicles. According to the simulation results, the average travelling time delay and average waiting time delay are gradually improved over the multiple runs, since our proposed method receives feedback from the environment. In addition, the results without and with three different deep learning algorithms, i.e., CNN, MLP and LSTM are compared. It is obvious that the deep reinforcement learning model works effectively when traffic density is neither too high nor too low. In addition, it can be concluded that the effective algorithms for traffic congestion prediction models in descending order are MLP, CNN, and LSTM, respectively.
A Review on Road Traffic Models for Intelligent Transportation System (ITS)IJSRD
Traffic flow models seek to describe the interaction of vehicles with their drivers and the infrastructure. Almost all the models directly or indirectly characterize the relationship among the traffic variables: the position, the speed, the flow, and the density of vehicles. These relationships can be based on either the behavior of individual vehicles in a traffic network in relation to the dynamics of other vehicles, the overall characteristics of the flow of vehicles in a traffic network, or a combination of the behavior of individual vehicles in a traffic network and the overall traffic flow characteristics. This paper describes the different models for automatic Traffic control system.
IMPORTANCE OF REALISTIC MOBILITY MODELS FOR VANET NETWORK SIMULATIONIJCNCJournal
In the performance evaluation of a protocol for a vehicular ad hoc network, the protocol should be tested under a realistic conditions including, representative data traffic models, and realistic movements of the mobile nodes which are the vehicles (i.e., a mobility model). This work is a comparative study between two mobility models that are used in the simulations of vehicular networks, i.e., MOVE (MObility model generator for VEhicular networks) and CityMob, a mobility pattern generator for VANET. We describe several mobility models for VANET simulations.
In this paper we aim to show that the mobility models can significantly affect the simulation results in VANET networks. The results presented in this article prove the importance of choosing a suitable real world scenario for performances studies of routing protocols in this kind of network.
A Dynamic Vehicular Traffic Control Using Ant Colony And Traffic Light Optimi...Kristen Carter
This document proposes a dynamic vehicular traffic control system using ant colony optimization and optimized traffic lights. It aims to reduce traffic congestion in urban areas. The system divides the road network into cells and uses artificial ants to guide vehicles along the least congested paths within each cell. It also proposes a new method for optimizing traffic light timing at intersections based on real-time vehicle count data collected from vehicles and traffic lights using VANET technology. Simulation results using the DIVERT simulator show that the proposed traffic light optimization method improves average vehicle speed and reduces waiting times and stopped vehicles at intersections compared to a system with usual fixed-duration traffic lights.
1
Intermodal Autonomous Mobility-on-Demand
Mauro Salazar1,2, Nicolas Lanzetti1,2, Federico Rossi2, Maximilian Schiffer2,3, and Marco Pavone2
Abstract—In this paper we study models and coordination poli-
cies for intermodal Autonomous Mobility-on-Demand (AMoD),
wherein a fleet of self-driving vehicles provides on-demand
mobility jointly with public transit. Specifically, we first present
a network flow model for intermodal AMoD, where we capture
the coupling between AMoD and public transit and the goal is
to maximize social welfare. Second, leveraging such a model,
we design a pricing and tolling scheme that allows the system
to recover a social optimum under the assumption of a perfect
market with selfish agents. Third, we present real-world case
studies for the transportation networks of New York City and
Berlin, which allow us to quantify the general benefits of
intermodal AMoD, as well as the societal impact of different
vehicles. In particular, we show that vehicle size and powertrain
type heavily affect intermodal routing decisions and, thus, system
efficiency. Our studies reveal that the cooperation between AMoD
fleets and public transit can yield significant benefits compared
to an AMoD system operating in isolation, whilst our proposed
tolling policies appear to be in line with recent discussions for
the case of New York City.
I. INTRODUCTION
TRAFFIC congestion is soaring all around the world. Besidesmere discomfort for passengers, congestion causes severe
economic and environmental harm, e.g., due to the loss of
working hours and pollutant emissions such as CO2, partic-
ulate matter, and NOx [1]. In 2013, traffic congestion cost
U.S. citizens 124 Billion USD [2]. Notably, transportation
remains one of a few sectors in which emissions are still
increasing [3]. Governments and municipalities are struggling
to find sustainable ways of transportation that can match
mobility needs and reduce environmental harm as well as
congestion.
To achieve sustainable modes of transportation, new mobil-
ity concepts and technology changes are necessary. However,
the potential to realize such concepts in urban environments is
limited, since upgrades to available infrastructures (e.g., roads
and subway lines) and their capacity are often extremely costly
and require decades-long planning timelines. Thus, mobility
concepts that use existing infrastructure in a more efficient way
are especially attractive. In this course, mobility-on-demand
services appear to be particularly promising. Herein, two main
concepts exist. On the one hand, free floating car sharing
systems strive to reduce the total number of private vehicles
in city centers. However, these systems offer limited flexibility
and are generally characterized by low adoption rates that
result from low vehicle availabilities due to the difficulty of
1Institute for Dynamic Systems and Control ETH Zürich, Zurich (ZH),
Switzerland {samauro,lnicolas}@ethz.ch
2Department of Aeronautics and Astro.
Motorcycle Movement Model Based on Markov Chain Process in Mixed TrafficIJECEIAES
Mixed traffic systems are dynamically complex since there are many parameters and variables that influence the interactions between the different kinds of vehicles. Modeling the behavior of vehicles, especially motorcycle which has erratic behavior is still being developed continuously, especially in developing countries which have heterogeneous traffic. To get a better understanding of motorcycle behavior, one can look at maneuvers performed by drivers. In this research, we tried to build a model of motorcycle movement which only focused on maneuver action to avoid the obstacle along with the trajectories using a Markov Chain approach. In Markov Chain, the maneuver of motorcycle will described by state transition. The state transition model is depend on probability function which will use for determine what action will be executed next. The maneuver of motorcycle using Markov Chain model was validated by comparing the analytical result with the naturalistic data, with similarity is calculated using MSE. In order to know how good our proposed method can describe the maneuver of motorcycle, we try to compare the MSE of the trajectory based on Markov Chain model with those using polynomial approach. The MSE results showed the performance of Markov Chain Model give the smallest MSE which 0.7666 about 0.24 better than 4 order polynomial.
Traffic Congestion Prediction using Deep Reinforcement Learning in Vehicular ...IJCNCJournal
In recent years, a new wireless network called vehicular ad-hoc network (VANET), has become a popular research topic. VANET allows communication among vehicles and with roadside units by providing information to each other, such as vehicle velocity, location and direction. In general, when many vehicles likely to use the common route to proceed to the same destination, it can lead to a congested route that should be avoided. It may be better if vehicles are able to predict accurately the traffic congestion and then avoid it. Therefore, in this work, the deep reinforcement learning in VANET to enhance the ability to predict traffic congestion on the roads is proposed. Furthermore, different types of neural networks namely Convolutional Neural Network (CNN), Multilayer Perceptron (MLP) and Long Short-Term Memory (LSTM) are investigated and compared in this deep reinforcement learning model to discover the most effective one. Our proposed method is tested by simulation. The traffic scenarios are created using traffic simulator called Simulation of Urban Mobility (SUMO) before integrating with deep reinforcement learning model. The simulation procedures, as well as the programming used, are described in detail. The performance of our proposed method is evaluated using two metrics; the average travelling time delay and average waiting time delay of vehicles. According to the simulation results, the average travelling time delay and average waiting time delay are gradually improved over the multiple runs, since our proposed method receives feedback from the environment. In addition, the results without and with three different deep learning algorithms, i.e., CNN, MLP and LSTM are compared. It is obvious that the deep reinforcement learning model works effectively when traffic density is neither too high nor too low. In addition, it can be concluded that the effective algorithms for traffic congestion prediction models in descending order are MLP, CNN, and LSTM, respectively.
TRAFFIC CONGESTION PREDICTION USING DEEP REINFORCEMENT LEARNING IN VEHICULAR ...IJCNCJournal
In recent years, a new wireless network called vehicular ad-hoc network (VANET), has become a popular research topic. VANET allows communication among vehicles and with roadside units by providing information to each other, such as vehicle velocity, location and direction. In general, when many vehicles likely to use the common route to proceed to the same destination, it can lead to a congested route that should be avoided. It may be better if vehicles are able to predict accurately the traffic congestion and then avoid it. Therefore, in this work, the deep reinforcement learning in VANET to enhance the ability to predict traffic congestion on the roads is proposed. Furthermore, different types of neural networks namely Convolutional Neural Network (CNN), Multilayer Perceptron (MLP) and Long Short-Term Memory (LSTM) are investigated and compared in this deep reinforcement learning model to discover the most effective one. Our proposed method is tested by simulation. The traffic scenarios are created using traffic simulator called Simulation of Urban Mobility (SUMO) before integrating with deep reinforcement learning model. The simulation procedures, as well as the programming used, are described in detail. The performance of our proposed method is evaluated using two metrics; the average travelling time delay and average waiting time delay of vehicles. According to the simulation results, the average travelling time delay and average waiting time delay are gradually improved over the multiple runs, since our proposed method receives feedback from the environment. In addition, the results without and with three different deep learning algorithms, i.e., CNN, MLP and LSTM are compared. It is obvious that the deep reinforcement learning model works effectively when traffic density is neither too high nor too low. In addition, it can be concluded that the effective algorithms for traffic congestion prediction models in descending order are MLP, CNN, and LSTM, respectively.
This document provides a review of fuzzy microscopic traffic models. It begins with an introduction describing the importance of traffic models and limitations of existing microscopic models. It then outlines the aim, objectives, and justification of integrating fuzzy logic into microscopic traffic models. Key aspects summarized include a review of existing microscopic car-following models and their limitations, an overview of fuzzy logic and how it can describe driver behavior more realistically, and directions for future research.
Adaptive traffic lights based on traffic flow prediction using machine learni...IJECEIAES
This document discusses using machine learning algorithms to predict traffic flow and reduce congestion at intersections. It compares linear regression, random forest regressor, decision tree regressor, gradient boosting regressor, and K-neighbor regressor models on a UK road traffic dataset. All models performed well according to evaluation metrics, indicating they are suitable for an adaptive traffic light system. The system was implemented using a random forest regressor model and simulations showed it reduced traffic congestion by 30.8%, justifying its effectiveness.
A Computational Study Of Traffic Assignment AlgorithmsNicole Adams
The document summarizes a study comparing algorithms for solving traffic assignment problems. It classified algorithms as link-based (using link flows), path-based (using path flows), or origin-based (using link flows from origins). It reviewed literature on algorithms like Frank-Wolfe (link-based), path equilibration (path-based), and origin-based algorithm. It chose to implement representative algorithms from each class: Frank-Wolfe, conjugate Frank-Wolfe, bi-conjugate Frank-Wolfe (link-based), path equilibration, gradient projection, projected gradient, improved social pressure (path-based), and Algorithm B (origin-based) to compare their performance on benchmark problems.
A Computational Study Of Traffic Assignment AlgorithmsAlicia Buske
This document summarizes a research study that compares different algorithms for solving traffic assignment problems. The study performs a literature review of prominent traffic assignment algorithms, classifying them based on how the solution is represented (link-based, path-based, origin-based). It then implements representative algorithms from each class and conducts computational tests on benchmark networks of varying sizes. The results are analyzed to compare algorithm performance and identify the impact of different algorithm components on running time.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
This document summarizes research on inter-vehicular communication using packet network theory. It discusses how vehicle-to-vehicle and vehicle-to-infrastructure communication can improve road safety and efficiency. The paper proposes using localization techniques combined with GPS to determine vehicle positions, and applying congestion algorithms to decongest traffic lanes. It also outlines algorithms for lane detection, pedestrian detection, and modifying Dijkstra's algorithm for optimal vehicle routing.
This document provides a review of fuzzy microscopic traffic flow models. It discusses how fuzzy logic can be used to model traffic flow and driver behavior by introducing uncertainty into variables like speed and headway. It describes fuzzy cellular automata models that represent traffic as vehicles characterized by fuzzy numbers for position and velocity. It also covers fuzzy logic car-following models that use linguistic terms and rules to model car-following behavior, and fuzzy route choice models that calculate possibility indexes to determine the most likely route. The goal of these fuzzy models is to more realistically simulate traffic flow and account for the imprecise nature of traffic data.
This document provides an overview of a student's assignment reviewing fuzzy microscopic traffic flow models. It discusses how fuzzy logic can be used to introduce uncertainty into traffic simulation models to better reflect real-world conditions. It reviews different types of fuzzy microscopic models, including fuzzy cellular models that use fuzzy numbers to represent vehicle parameters and transitions between time steps, and fuzzy logic car-following models that use fuzzy reasoning and linguistic terms to describe driver behavior. The goal is to understand how these fuzzy microscopic models work.
An Equation is Generated with the help of Previous Traffic Data of NH-06.(Nagpur - Amravati) for Forecasting of Traffic at NH-06. A Simulation Model is Prepared using Microscopic Simulation tool VISSIM 7.0 which shows the behaviour of heterogeneous Traffic at Indian Highway. Diffrent Forms of Graph are Obtained for Estimation of Capacity of highway and Relation between Volume and Stream Speed. From the Graph a polynomial equation having second degree is obtain which shows the relationship
between Widh of Carriageway and Capacity of Highway. This Equation is used for Estimation of Capacity at Indian Highway.
Traffic assignment models are used to estimate traffic flows on a transportation network based on origin-destination flows and the network's topology, link characteristics, and performance functions. Traffic is assigned to paths between origin-destination pairs based on travel time or impedance. Traffic assignment is a key part of travel demand forecasting and is used to predict future network flows and performance under different planning scenarios. Common traffic assignment methods include all-or-nothing assignment, user equilibrium assignment, and system optimum assignment.
Help the Genetic Algorithm to Minimize the Urban Traffic on IntersectionsIJORCS
This document summarizes a research paper that uses genetic algorithms to optimize traffic light timing at intersections to minimize traffic. It first describes modeling traffic light intersections using Petri nets. It then explains how genetic algorithms can be used for optimization by coding the problem variables in chromosomes, defining a fitness function to evaluate populations over generations, and using operators like mutation and crossover. The fitness function aims to minimize average traffic light cycle times based on 14 parameters related to light timing and vehicle wait times at two intersections. The genetic algorithm optimization of traffic light timing parameters is found to improve traffic flow at intersections.
Traffic State Estimation and Prediction under Heterogeneous Traffic ConditionsIDES Editor
The recent economic growth in developing countries
like India has resulted in an intense increase of vehicle
ownership and use, as witnessed by severe traffic congestion
and bottlenecks during peak hours in most of the metropolitan
cities. Intelligent Transportation Systems (ITS) aim to reduce
traffic congestion by adopting various strategies such as
providing pre-trip and en-route traffic information thereby
reducing demand, adaptive signal control for area wide
optimization of traffic flow, etc. The successful deployment
and the reliability of these systems largely depend on the
accurate estimation of the current traffic state and quick and
reliable prediction to future time steps. At a macroscopic level,
this involves the prediction of fundamental traffic stream
parameters which include speed, density and flow in spacetime
domain. The complexity of prediction is enhanced by
heterogeneous traffic conditions as prevailing in India due to
less lane discipline and complex interactions among different
vehicle types. Also, there is no exclusive traffic flow model for
heterogeneous traffic conditions which can characterize the
traffic stream at a macroscopic level. Hence, the present study
tries to explore the applicability of an existing macroscopic
model, namely the Lighthill-Whitham-Richards (LWR) model,
for short term prediction of traffic flow in a busy arterial in
the city of Chennai, India, under heterogeneous traffic
conditions. Both linear and exponential speed-density
relations were considered and incorporated into the
macroscopic model. The resulting partial differential
equations are solved numerically and the results are found to
be encouraging. This model can ultimately be helpful for the
implementation of ATIS/ATMS applications under
heterogeneous traffic environment.
Modeling business management systems transportationSherin El-Rashied
Introduction
How IT &Business Process Fit Together
What is modeling?
What is Simulation?
Modeling & Simulation in Business Process Management
The Seven-Step Model-Building Process
Transportation
An overview on transportation modeling
Transport model scope & structure
Car Traffic Jam Problem
Aim of Transportation Model
Types of Traffic Models
Microscopic Traffic model & Simulation
Cellular Automaton model
Conclusion
Solving Transportation Problem by Software Application
Class Example
CREATING DATA OUTPUTS FROM MULTI AGENT TRAFFIC MICRO SIMULATION TO ASSIMILATI...cscpconf
The intensive development of traffic engineering and technologies that are integrated into vehicles, roads and their surroundings, bring opportunities of real time transport mobility modeling. Based on such model it is then possible to establish a predictive layer that is capable of predicting short and long term traffic flow behavior. It is possible to create the real time model of traffic mobility based on generated data. However, data may have different geographical, temporal or other constraints, or failures. It is therefore appropriate to develop tools that artificially create missing data, which can then be assimilated with real data. This paper presents a mechanism describing strategies of generating artificial data using microsimulations. It describes traffic microsimulation based on our solution of multiagent framework over which a system for generating traffic data is built. The system generates data of a structure corresponding to the data acquired in the real world.
CREATING DATA OUTPUTS FROM MULTI AGENT TRAFFIC MICRO SIMULATION TO ASSIMILATI...csandit
interface for communication between agents.
class for communication management.
Agent Factory: class for agent creation.
Agent Directory: class for agent registration.
Agent Behavior: abstract class for agent behavior definition.
Concrete Agent: concrete agent implementation.
The core of the architecture is based on three main classes:
- Manager - represents the highest level of hierarchy, manages lower level agents.
- Agent - represents basic autonomous entity, encapsulates behavior and communication.
- Structure - represents geographical area, contains reference to lower level agents.
Agents are organized hierarchically according to geographical areas they represent. Manager is
the root of hierarchy, structures represent areas and agents are located
A novel k-means powered algorithm for an efficient clustering in vehicular ad...IJECEIAES
Considerable attention has recently been given to the routing issue in vehicular ad-hoc networks (VANET). Indeed, the repetitive communication failures and high velocity of vehicles reduce the efficacy of routing protocols in VANET. The clustering technique is considered an important solution to overcome these difficulties. In this paper, an efficient clustering approach using an adapted k-means algorithm for VANET has been introduced to enhance network stability in a highway environment. Our approach relies on a clustering scheme that accounts for the network characteristics and the number of connected vehicles. The simulation indicates that the proposed approach is more efficient than similar schemes. The results obtained appear an overall increase in constancy, proven by an increase in cluster head lifetime by 66%, and an improvement in robustness clear in the overall reduction of the end-to-end delay by 46% as well as an increase in throughput by 74%.
A Framework for Traffic Planning and Forecasting using Micro-Simulation Calib...ITIIIndustries
This paper presents the application of microsimulation for traffic planning and forecasting, and proposes a new framework to model complex traffic conditions by calibrating and adjusting traffic parameters of a microsimulation model. By using an open source micro-simulator package, TRANSIMS, in this study, animated and numerical results were produced and analysed. The framework of traffic model calibration was evaluated for its usefulness and practicality. Finally, we discuss future applications such as providing end users with real time traffic information through Intelligent Transport System (ITS) integration.
JAVA 2013 IEEE DATAMINING PROJECT T drive enhancing driving directions with t...IEEEGLOBALSOFTTECHNOLOGIES
To Get any Project for CSE, IT ECE, EEE Contact Me @ 09849539085, 09966235788 or mail us - ieeefinalsemprojects@gmail.com-Visit Our Website: www.finalyearprojects.org
T drive enhancing driving directions with taxi drivers’ intelligenceIEEEFINALYEARPROJECTS
To Get any Project for CSE, IT ECE, EEE Contact Me @ 09849539085, 09966235788 or mail us - ieeefinalsemprojects@gmail.co¬m-Visit Our Website: www.finalyearprojects.org
3 College Essay Editing Tips - YouTube. 7 ways to Edit your Essay for 13% higher grades (2021). HOW TO Edit Your College Essay FAST!! (3 HACKS TO BETTER WRITING NOW!!!). Edit My Paper | Online Paper Editing & Writing For College. College Essay Format: Simple Steps to Be Followed. Wordvice Ranked "Best College Essay Editing Service" in Essay Editor .... 020 College Essay Editing Example Software Program Writing ~ Thatsnotus. College Essay Editing: Tips for a Perfect Paper - CollegeBasics. College essay editing service. Tips for College Essay Editing - College Raptor BlogCollege Raptor. Essay Editing Ins and Outs: Tips to Help You Improve Skills. How Does Our College Essay Editing Service Work? | essay-editor.net. Sample College Essays. Free Download. Easy to Edit and Print. Best Tips for Writing and Editing Admissions Essays. College essay editing. Essay Writing Service. 2022-11-11.
Were The Dropping Of The Atomic Bombs Justified? Free Essay Example. Were The Dropping Of The Atomic Bombs Justified? - GCSE History .... Reasons for dropping the atomic bomb essay. Atomic Bomb Essay Pros and Cons Letter To Truman Scenario | TPT. Was the atomic bomb justified essay. Dropping of the Atomic Bomb. Atomic bomb necessary essay. Atomic bomb essay conclusion. The dropping of the atomic bombs on Japan Free Essay Example. Shocking Atomic Bomb Essay ~ Thatsnotus.
More Related Content
Similar to A Simulation-Based Dynamic Traffic Assignment Model With Combined Modes
This document provides a review of fuzzy microscopic traffic models. It begins with an introduction describing the importance of traffic models and limitations of existing microscopic models. It then outlines the aim, objectives, and justification of integrating fuzzy logic into microscopic traffic models. Key aspects summarized include a review of existing microscopic car-following models and their limitations, an overview of fuzzy logic and how it can describe driver behavior more realistically, and directions for future research.
Adaptive traffic lights based on traffic flow prediction using machine learni...IJECEIAES
This document discusses using machine learning algorithms to predict traffic flow and reduce congestion at intersections. It compares linear regression, random forest regressor, decision tree regressor, gradient boosting regressor, and K-neighbor regressor models on a UK road traffic dataset. All models performed well according to evaluation metrics, indicating they are suitable for an adaptive traffic light system. The system was implemented using a random forest regressor model and simulations showed it reduced traffic congestion by 30.8%, justifying its effectiveness.
A Computational Study Of Traffic Assignment AlgorithmsNicole Adams
The document summarizes a study comparing algorithms for solving traffic assignment problems. It classified algorithms as link-based (using link flows), path-based (using path flows), or origin-based (using link flows from origins). It reviewed literature on algorithms like Frank-Wolfe (link-based), path equilibration (path-based), and origin-based algorithm. It chose to implement representative algorithms from each class: Frank-Wolfe, conjugate Frank-Wolfe, bi-conjugate Frank-Wolfe (link-based), path equilibration, gradient projection, projected gradient, improved social pressure (path-based), and Algorithm B (origin-based) to compare their performance on benchmark problems.
A Computational Study Of Traffic Assignment AlgorithmsAlicia Buske
This document summarizes a research study that compares different algorithms for solving traffic assignment problems. The study performs a literature review of prominent traffic assignment algorithms, classifying them based on how the solution is represented (link-based, path-based, origin-based). It then implements representative algorithms from each class and conducts computational tests on benchmark networks of varying sizes. The results are analyzed to compare algorithm performance and identify the impact of different algorithm components on running time.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
This document summarizes research on inter-vehicular communication using packet network theory. It discusses how vehicle-to-vehicle and vehicle-to-infrastructure communication can improve road safety and efficiency. The paper proposes using localization techniques combined with GPS to determine vehicle positions, and applying congestion algorithms to decongest traffic lanes. It also outlines algorithms for lane detection, pedestrian detection, and modifying Dijkstra's algorithm for optimal vehicle routing.
This document provides a review of fuzzy microscopic traffic flow models. It discusses how fuzzy logic can be used to model traffic flow and driver behavior by introducing uncertainty into variables like speed and headway. It describes fuzzy cellular automata models that represent traffic as vehicles characterized by fuzzy numbers for position and velocity. It also covers fuzzy logic car-following models that use linguistic terms and rules to model car-following behavior, and fuzzy route choice models that calculate possibility indexes to determine the most likely route. The goal of these fuzzy models is to more realistically simulate traffic flow and account for the imprecise nature of traffic data.
This document provides an overview of a student's assignment reviewing fuzzy microscopic traffic flow models. It discusses how fuzzy logic can be used to introduce uncertainty into traffic simulation models to better reflect real-world conditions. It reviews different types of fuzzy microscopic models, including fuzzy cellular models that use fuzzy numbers to represent vehicle parameters and transitions between time steps, and fuzzy logic car-following models that use fuzzy reasoning and linguistic terms to describe driver behavior. The goal is to understand how these fuzzy microscopic models work.
An Equation is Generated with the help of Previous Traffic Data of NH-06.(Nagpur - Amravati) for Forecasting of Traffic at NH-06. A Simulation Model is Prepared using Microscopic Simulation tool VISSIM 7.0 which shows the behaviour of heterogeneous Traffic at Indian Highway. Diffrent Forms of Graph are Obtained for Estimation of Capacity of highway and Relation between Volume and Stream Speed. From the Graph a polynomial equation having second degree is obtain which shows the relationship
between Widh of Carriageway and Capacity of Highway. This Equation is used for Estimation of Capacity at Indian Highway.
Traffic assignment models are used to estimate traffic flows on a transportation network based on origin-destination flows and the network's topology, link characteristics, and performance functions. Traffic is assigned to paths between origin-destination pairs based on travel time or impedance. Traffic assignment is a key part of travel demand forecasting and is used to predict future network flows and performance under different planning scenarios. Common traffic assignment methods include all-or-nothing assignment, user equilibrium assignment, and system optimum assignment.
Help the Genetic Algorithm to Minimize the Urban Traffic on IntersectionsIJORCS
This document summarizes a research paper that uses genetic algorithms to optimize traffic light timing at intersections to minimize traffic. It first describes modeling traffic light intersections using Petri nets. It then explains how genetic algorithms can be used for optimization by coding the problem variables in chromosomes, defining a fitness function to evaluate populations over generations, and using operators like mutation and crossover. The fitness function aims to minimize average traffic light cycle times based on 14 parameters related to light timing and vehicle wait times at two intersections. The genetic algorithm optimization of traffic light timing parameters is found to improve traffic flow at intersections.
Traffic State Estimation and Prediction under Heterogeneous Traffic ConditionsIDES Editor
The recent economic growth in developing countries
like India has resulted in an intense increase of vehicle
ownership and use, as witnessed by severe traffic congestion
and bottlenecks during peak hours in most of the metropolitan
cities. Intelligent Transportation Systems (ITS) aim to reduce
traffic congestion by adopting various strategies such as
providing pre-trip and en-route traffic information thereby
reducing demand, adaptive signal control for area wide
optimization of traffic flow, etc. The successful deployment
and the reliability of these systems largely depend on the
accurate estimation of the current traffic state and quick and
reliable prediction to future time steps. At a macroscopic level,
this involves the prediction of fundamental traffic stream
parameters which include speed, density and flow in spacetime
domain. The complexity of prediction is enhanced by
heterogeneous traffic conditions as prevailing in India due to
less lane discipline and complex interactions among different
vehicle types. Also, there is no exclusive traffic flow model for
heterogeneous traffic conditions which can characterize the
traffic stream at a macroscopic level. Hence, the present study
tries to explore the applicability of an existing macroscopic
model, namely the Lighthill-Whitham-Richards (LWR) model,
for short term prediction of traffic flow in a busy arterial in
the city of Chennai, India, under heterogeneous traffic
conditions. Both linear and exponential speed-density
relations were considered and incorporated into the
macroscopic model. The resulting partial differential
equations are solved numerically and the results are found to
be encouraging. This model can ultimately be helpful for the
implementation of ATIS/ATMS applications under
heterogeneous traffic environment.
Modeling business management systems transportationSherin El-Rashied
Introduction
How IT &Business Process Fit Together
What is modeling?
What is Simulation?
Modeling & Simulation in Business Process Management
The Seven-Step Model-Building Process
Transportation
An overview on transportation modeling
Transport model scope & structure
Car Traffic Jam Problem
Aim of Transportation Model
Types of Traffic Models
Microscopic Traffic model & Simulation
Cellular Automaton model
Conclusion
Solving Transportation Problem by Software Application
Class Example
CREATING DATA OUTPUTS FROM MULTI AGENT TRAFFIC MICRO SIMULATION TO ASSIMILATI...cscpconf
The intensive development of traffic engineering and technologies that are integrated into vehicles, roads and their surroundings, bring opportunities of real time transport mobility modeling. Based on such model it is then possible to establish a predictive layer that is capable of predicting short and long term traffic flow behavior. It is possible to create the real time model of traffic mobility based on generated data. However, data may have different geographical, temporal or other constraints, or failures. It is therefore appropriate to develop tools that artificially create missing data, which can then be assimilated with real data. This paper presents a mechanism describing strategies of generating artificial data using microsimulations. It describes traffic microsimulation based on our solution of multiagent framework over which a system for generating traffic data is built. The system generates data of a structure corresponding to the data acquired in the real world.
CREATING DATA OUTPUTS FROM MULTI AGENT TRAFFIC MICRO SIMULATION TO ASSIMILATI...csandit
interface for communication between agents.
class for communication management.
Agent Factory: class for agent creation.
Agent Directory: class for agent registration.
Agent Behavior: abstract class for agent behavior definition.
Concrete Agent: concrete agent implementation.
The core of the architecture is based on three main classes:
- Manager - represents the highest level of hierarchy, manages lower level agents.
- Agent - represents basic autonomous entity, encapsulates behavior and communication.
- Structure - represents geographical area, contains reference to lower level agents.
Agents are organized hierarchically according to geographical areas they represent. Manager is
the root of hierarchy, structures represent areas and agents are located
A novel k-means powered algorithm for an efficient clustering in vehicular ad...IJECEIAES
Considerable attention has recently been given to the routing issue in vehicular ad-hoc networks (VANET). Indeed, the repetitive communication failures and high velocity of vehicles reduce the efficacy of routing protocols in VANET. The clustering technique is considered an important solution to overcome these difficulties. In this paper, an efficient clustering approach using an adapted k-means algorithm for VANET has been introduced to enhance network stability in a highway environment. Our approach relies on a clustering scheme that accounts for the network characteristics and the number of connected vehicles. The simulation indicates that the proposed approach is more efficient than similar schemes. The results obtained appear an overall increase in constancy, proven by an increase in cluster head lifetime by 66%, and an improvement in robustness clear in the overall reduction of the end-to-end delay by 46% as well as an increase in throughput by 74%.
A Framework for Traffic Planning and Forecasting using Micro-Simulation Calib...ITIIIndustries
This paper presents the application of microsimulation for traffic planning and forecasting, and proposes a new framework to model complex traffic conditions by calibrating and adjusting traffic parameters of a microsimulation model. By using an open source micro-simulator package, TRANSIMS, in this study, animated and numerical results were produced and analysed. The framework of traffic model calibration was evaluated for its usefulness and practicality. Finally, we discuss future applications such as providing end users with real time traffic information through Intelligent Transport System (ITS) integration.
JAVA 2013 IEEE DATAMINING PROJECT T drive enhancing driving directions with t...IEEEGLOBALSOFTTECHNOLOGIES
To Get any Project for CSE, IT ECE, EEE Contact Me @ 09849539085, 09966235788 or mail us - ieeefinalsemprojects@gmail.com-Visit Our Website: www.finalyearprojects.org
T drive enhancing driving directions with taxi drivers’ intelligenceIEEEFINALYEARPROJECTS
To Get any Project for CSE, IT ECE, EEE Contact Me @ 09849539085, 09966235788 or mail us - ieeefinalsemprojects@gmail.co¬m-Visit Our Website: www.finalyearprojects.org
Similar to A Simulation-Based Dynamic Traffic Assignment Model With Combined Modes (20)
3 College Essay Editing Tips - YouTube. 7 ways to Edit your Essay for 13% higher grades (2021). HOW TO Edit Your College Essay FAST!! (3 HACKS TO BETTER WRITING NOW!!!). Edit My Paper | Online Paper Editing & Writing For College. College Essay Format: Simple Steps to Be Followed. Wordvice Ranked "Best College Essay Editing Service" in Essay Editor .... 020 College Essay Editing Example Software Program Writing ~ Thatsnotus. College Essay Editing: Tips for a Perfect Paper - CollegeBasics. College essay editing service. Tips for College Essay Editing - College Raptor BlogCollege Raptor. Essay Editing Ins and Outs: Tips to Help You Improve Skills. How Does Our College Essay Editing Service Work? | essay-editor.net. Sample College Essays. Free Download. Easy to Edit and Print. Best Tips for Writing and Editing Admissions Essays. College essay editing. Essay Writing Service. 2022-11-11.
Were The Dropping Of The Atomic Bombs Justified? Free Essay Example. Were The Dropping Of The Atomic Bombs Justified? - GCSE History .... Reasons for dropping the atomic bomb essay. Atomic Bomb Essay Pros and Cons Letter To Truman Scenario | TPT. Was the atomic bomb justified essay. Dropping of the Atomic Bomb. Atomic bomb necessary essay. Atomic bomb essay conclusion. The dropping of the atomic bombs on Japan Free Essay Example. Shocking Atomic Bomb Essay ~ Thatsnotus.
The document provides an overview of the 8 basic steps for writing a research paper through HelpWriting.net. It describes the registration process, completing an order form to request a paper, reviewing writer bids and selecting one, reviewing and authorizing payment for the completed paper, and utilizing free revisions to ensure satisfaction. It emphasizes the site's commitment to original, high-quality content and full refunds for plagiarized work.
College Essay Consultant Reacts To College AdmissiAllison Koehn
Burial urns have been used for thousands of years to hold cremated human remains, with some of the earliest urns dating back to ancient Greece and Rome. Urn styles and materials have varied widely across cultures and time periods, from simple pottery vessels to ornate containers made of materials like stone, metal, and ceramic. Modern urns offer a wide variety of options to respectfully hold and memorialize cremated remains according to the deceased's wishes or cultural traditions.
Professional Essay Writing Service Australia Essay OnliAllison Koehn
This document discusses a professional essay writing service called HelpWriting.net. It outlines a 5 step process for using their service: 1) Create an account, 2) Complete an order form providing instructions and deadline, 3) Review bids from writers and choose one, 4) Review the completed paper and authorize payment, 5) Request revisions until satisfied. It emphasizes providing original, high-quality content and offering refunds for plagiarized work.
The document provides instructions for students to get writing help from the HelpWriting.net website. It outlines a 5-step process: 1) Create an account with an email and password. 2) Complete an order form with instructions and deadline. 3) Review bids from writers and select one. 4) Review the completed paper and authorize payment. 5) Request revisions until satisfied with the paper. The document promotes HelpWriting.net as providing original, high-quality content with refunds for plagiarism.
How To Write A Good Paragraph 1 Paragraph WrAllison Koehn
The document discusses how role-playing games with simulated violence at Brooklyn High School are diverting students from the real world. Some students are playing a game with water guns where money is involved, and they are taking the game too far by spending too much time creating elaborate schemes. There are also concerns that the games could promote real violence or dangerous behavior if not stopped. While role-playing games can be fun, they are still diverting students' attention away from their education.
Sample College Application Essay Examples ClassleAllison Koehn
This document provides instructions for requesting writing assistance from the HelpWriting.net website. It outlines a 5-step process: 1) Create an account with a password and email. 2) Complete a 10-minute order form providing instructions, sources, and deadline. 3) Review bids from writers and choose one based on qualifications. 4) Review the completed paper and authorize payment. 5) Request revisions to ensure satisfaction, with a refund offered for plagiarized work. The purpose is to outline the simple process for obtaining original, high-quality content through this writing assistance service.
Writing A Problem Solution Essay TelegraphAllison Koehn
The document provides information about flying from McCarran International Airport in Las Vegas to William P. Hobby Airport in Houston. Both nonstop and connecting flights are available, with connecting flights taking 4.5-5.5 hours and nonstop flights taking 2 hours and 50 minutes. American Airlines offers the majority of flights, but United and Delta also fly this route. The airport has various dining options and parking garages near the terminals. Rental cars and taxis are also available for transportation from the airport.
The document provides instructions for creating a request on the HelpWriting.net website to have a paper written. It outlines a 5-step process: 1) Create an account with valid email and password. 2) Complete a 10-minute order form providing instructions, sources, and deadline. 3) Review bids from writers and choose one based on qualifications. 4) Receive the paper and ensure it meets expectations before authorizing payment. 5) Request revisions to ensure satisfaction and receive a refund if the paper is plagiarized.
How To Write Law Essays Exams By S.I. Strong (EnglAllison Koehn
The short story "Harrison Bergeron" by Kurt Vonnegut satirizes a dystopian future society that attempts to achieve total equality by handicapping citizens based on attributes like intelligence and attractiveness. The story criticizes ideological extremes that try to enforce conformity at the cost of individualism. It uses exaggeration and absurdity to comment on issues like government overreach and how technology could potentially be misused.
The United States political system and electoral process favors a two-party system. First-past-the-post elections and winner-take-all rules encourage voters to coalesce around two broad coalitions. Third parties face significant funding and ballot access hurdles. The Democratic and Republican parties have also established powerful political machines that are difficult for new parties to challenge.
Best Custom Essay Writing Services Online, Writing SAllison Koehn
This document provides instructions for using the Best Custom Essay Writing Services Online website to get assistance with writing assignments. It outlines a 5-step process: 1) Create an account with a password and email. 2) Complete a 10-minute order form with instructions, sources, and deadline. 3) Review bids from writers and choose one based on qualifications. 4) Review the completed paper and authorize payment if satisfied. 5) Request revisions until fully satisfied, with a refund offered for plagiarized work. The service aims to provide original, high-quality content to meet customer needs.
Pin By Ariela On W R I T I N G Introductory Paragraph, EssAllison Koehn
1919 was a violent year in the U.S. characterized by labor unrest and racial tensions. Over 4 million soldiers were returning from WWI looking for jobs, competing with the millions of Southern migrants who moved North during the war to work in industry. This shortage of jobs exacerbated tensions. Returning black veterans especially faced discrimination and struggled to find work. Racial conflicts erupted as a result. Labor unions organized thousands of strikes to demand higher wages to offset inflation, but met resistance from business and government. The year saw one of the worst race riots in U.S. history in Chicago.
What Is The Importance Of Research Paper Writing Service - UK CustAllison Koehn
The document provides instructions for using a research paper writing service called HelpWriting.net. It outlines a 5-step process: 1) Create an account with an email and password. 2) Complete an order form with instructions, sources, and deadline. 3) Review bids from writers and choose one. 4) Review the paper and authorize payment or request revisions. 5) Request multiple revisions to ensure satisfaction, with a full refund option for plagiarism. The service aims to provide original, high-quality content meeting customers' needs.
The document provides instructions for requesting writing assistance from HelpWriting.net. It outlines a 5-step process: 1) Create an account with a password and email. 2) Complete a 10-minute order form providing instructions, sources, and deadline. 3) Review bids from writers and choose one based on qualifications. 4) Review the completed paper and authorize payment if satisfied. 5) Request revisions until fully satisfied, with a refund option for plagiarized content. The service aims to provide original, high-quality assignments meeting all needs.
😍 Grade 12 English Essay Examples. Grade 12 Level.pdfAllison Koehn
The document provides instructions for students seeking writing assistance from HelpWriting.net. It outlines a 5-step process: 1) Create an account; 2) Complete an order form providing instructions and deadline; 3) Review bids from writers and select one; 4) Review the completed paper and authorize payment; 5) Request revisions to ensure satisfaction. It emphasizes HelpWriting.net's commitment to original, high-quality work and full refunds for plagiarized content.
The document provides steps for writing a college essay through the website HelpWriting.net. It outlines the registration process, how to submit an assignment request including instructions and deadlines, how writers bid on requests and are selected, revising the paper, and getting refunds for plagiarized work. The website uses a bidding system where writers submit bids and clients select a writer based on qualifications to start working on the assignment.
Sample Term Paper About Diseases Research PaperAllison Koehn
This case study examines a patient named AJ who has impairments in autobiographical memory due to a neuropsychological syndrome. AJ struggles to recall personal events and experiences from her past in a coherent manner. Neuropsychological tests on AJ indicate atypical frontal lobe functions, such as problems with naming, attention, and obsessive tendencies. Her condition shares features with disorders like obsessive compulsive disorder and attention deficit hyperactivity disorder. The case study provides insights into how autobiographical memory impairments manifest and are evaluated in a patient.
Guidelines For A Research Paper. Guidelines For A ReAllison Koehn
1. The document provides steps for requesting assignment writing help from HelpWriting.net, including creating an account, completing an order form, reviewing writer bids, authorizing payment, and requesting revisions.
2. Students complete a brief registration, then fill out a 10-minute order form providing instructions, sources, and deadline for their paper. HelpWriting uses a bidding system where students choose a writer based on qualifications.
3. The process allows students to ensure the paper meets expectations, request revisions, and receive a refund if the paper is plagiarized to ensure satisfaction.
Communicating effectively and consistently with students can help them feel at ease during their learning experience and provide the instructor with a communication trail to track the course's progress. This workshop will take you through constructing an engaging course container to facilitate effective communication.
it describes the bony anatomy including the femoral head , acetabulum, labrum . also discusses the capsule , ligaments . muscle that act on the hip joint and the range of motion are outlined. factors affecting hip joint stability and weight transmission through the joint are summarized.
Strategies for Effective Upskilling is a presentation by Chinwendu Peace in a Your Skill Boost Masterclass organisation by the Excellence Foundation for South Sudan on 08th and 09th June 2024 from 1 PM to 3 PM on each day.
This document provides an overview of wound healing, its functions, stages, mechanisms, factors affecting it, and complications.
A wound is a break in the integrity of the skin or tissues, which may be associated with disruption of the structure and function.
Healing is the body’s response to injury in an attempt to restore normal structure and functions.
Healing can occur in two ways: Regeneration and Repair
There are 4 phases of wound healing: hemostasis, inflammation, proliferation, and remodeling. This document also describes the mechanism of wound healing. Factors that affect healing include infection, uncontrolled diabetes, poor nutrition, age, anemia, the presence of foreign bodies, etc.
Complications of wound healing like infection, hyperpigmentation of scar, contractures, and keloid formation.
বাংলাদেশের অর্থনৈতিক সমীক্ষা ২০২৪ [Bangladesh Economic Review 2024 Bangla.pdf] কম্পিউটার , ট্যাব ও স্মার্ট ফোন ভার্সন সহ সম্পূর্ণ বাংলা ই-বুক বা pdf বই " সুচিপত্র ...বুকমার্ক মেনু 🔖 ও হাইপার লিংক মেনু 📝👆 যুক্ত ..
আমাদের সবার জন্য খুব খুব গুরুত্বপূর্ণ একটি বই ..বিসিএস, ব্যাংক, ইউনিভার্সিটি ভর্তি ও যে কোন প্রতিযোগিতা মূলক পরীক্ষার জন্য এর খুব ইম্পরট্যান্ট একটি বিষয় ...তাছাড়া বাংলাদেশের সাম্প্রতিক যে কোন ডাটা বা তথ্য এই বইতে পাবেন ...
তাই একজন নাগরিক হিসাবে এই তথ্য গুলো আপনার জানা প্রয়োজন ...।
বিসিএস ও ব্যাংক এর লিখিত পরীক্ষা ...+এছাড়া মাধ্যমিক ও উচ্চমাধ্যমিকের স্টুডেন্টদের জন্য অনেক কাজে আসবে ...
Main Java[All of the Base Concepts}.docxadhitya5119
This is part 1 of my Java Learning Journey. This Contains Custom methods, classes, constructors, packages, multithreading , try- catch block, finally block and more.
A Simulation-Based Dynamic Traffic Assignment Model With Combined Modes
1. Promet – Traffic&Transportation, Vol. 26, 2014, No. 1, 65-73 65
M. Meng, C. Shao, J. Zeng, C. Dong: A Simulation-Based Dynamic Traffic Assignment Model with Combined Modes
MENG MENG, Ph.D.
E-mail: 10114221@bjtu.edu.cn
1. MOE Key Laboratory for Urban Transportation Complex
Systems Theory and Technology,
Beijing Jiaotong University
No.3 Shang Yuan Cun, Haidian District,
Beijing 100044, China
2. Centre for Infrastructure Systems,
School of Civil and Environmental Engineering,
Nanyang Technological University,
Singapore 639798, Singapore
CHUNFU SHAO, Professor, Ph.D.
E-mail: cfshao@bjtu.edu.cn
MOE Key Laboratory for Urban Transportation Complex
Systems Theory and Technology, Beijing,
Beijing Jiaotong University
No.3 Shang Yuan Cun, Haidian District,
Beijing 100044, China
JINGJING ZENG, M.E.
E-mail: zengjj@ehualu.com
Beijing E-Hualu Information Technology Company Limited
China Hualu Building No.165 Fushiroad,
Shijingshan District, Beijing, China 100043
CHUNJIAO DONG, Ph.D.
E-mail: serena.dongchj@gmail.com
Center for Transportation Research,
University of Tennessee
600 Henley Street, Knoxville, TN37996-4133, USA
Traffic in the Cities
Preliminary Communication
Accepted: Mar. 4, 2013
Approved: Oct. 12, 2013
A SIMULATION-BASED DYNAMIC TRAFFIC
ASSIGNMENT MODEL WITH COMBINED MODES
ABSTRACT
This paper presents a dynamic traffic assignment (DTA)
model for urban multi-modal transportation network by con-
structing a mesoscopic simulation model. Several traffic
means such as private car, subway, bus and bicycle are con-
sidered in the network. The mesoscopic simulator consists of
a mesoscopic supply simulator based on MesoTS model and
a time-dependent demand simulator. The mode choice is si-
multaneously considered with the route choice based on the
improved C-Logit model. The traffic assignment procedure is
implemented by a time-dependent shortest path (TDSP) al-
gorithm in which travellers choose their modes and routes
based on a range of choice criteria. The model is particularly
suited for appraising a variety of transportation management
measures, especially for the application of Intelligent Trans-
port Systems (ITS). Five example cases including OD demand
level, bus frequency, parking fee, information supply and car
ownership rate are designed to test the proposed simulation
model through a medium-scale case study in Beijing Chaoy-
ang District in China. Computational results illustrate excel-
lent performance and the application of the model to analy-
sis of urban multi-modal transportation networks.
KEY WORDS
dynamic traffic assignment, combined modes, mesoscopic
simulation, time-dependent shortest path algorithm
1. INTRODUCTION
The modelling of simulation-based dynamic traffic
assignment (DTA) has witnessed a growing amount of
research attention recently as the management of the
time-dependent traffic flow becomes more and more
important. Most of the simulation-based DTA litera-
tures are concentrated on the single mode modelling,
usually private car or bus. In metropolitan areas, how-
ever, the combined travel mode is becoming more and
more common, where travellers often transfer more
than one time to complete a trip by using at least two
different traffic modes. The ignorance of the transfer
behaviour limits the existing research used in the real-
world application.
2. M. Meng, C. Shao, J. Zeng, C. Dong: A Simulation-Based Dynamic Traffic Assignment Model with Combined Modes
66 Promet – Traffic&Transportation, Vol. 26, 2014, No. 1, 65-73
Traffic assignment with combined modes is more
complicated than the assignment of a pure mode trip.
Especially, dynamic combined trip assignment needs
to focus on the mode-route choice problem in the
time-dependent network. It involves mode and route
choice simultaneously in the traffic demand simula-
tor in which travellers choose not only the routes but
the traffic mode at the transfer nodes. The existing
simulation-based DTA models are still limited by the
pure mode trip assumption [1-5]. For instance, the
mainstream traffic planning software DYNASMART
and DYNAMIT regard buses as part of the vehicular
mix, which follow a pre-specified route and departure
schedule. The travel mode assignment is exogenous
to the model which neglects the interaction between
mode choice and trip assignment. Few DTA studies
have been developed with considering the combined
mode problem. Abdelghany [6] proposed an ana-
lytical stochastic DTA model with combined mode in
the multi-modal networks. The model is formulated
as minimization mathematical program with a set of
descriptive constrains. Meanwhile, Abdelghany and
Mahmassani [7] presented a simulation-based DTA
model with combined mode. They captured the inter-
action between mode choice and traffic assignment
in a multi-modal network. However, these two models
just focus on the motor vehicles and regard travel time
as the only factors in road impedance function model.
A simulation-based DTA model with combined modes
is closer to realistic behaviour in mode choice and as-
signment procedures, which should be the future di-
rection of the research.
Four different traffic modes are considered in this
paper including private car, bus, subway, and bicycle.
A simulation-based approach to the dynamic assign-
ment problem is adopted in this work in an attempt
to combine mode and route choice with more realistic
travel time function. The paper is organized as follows.
The simulation framework is presented in Section 2.
Section 3 elaborates about the components of the me-
soscopic vehicle movement simulator. After the travel
time analysis, Section 4 proposes the assignment al-
gorithm and the mode-route choice procedures. Five
sets of simulation experiments are designed in Sec-
tion 5. Computational results illustrate the validity
of the model and provide the basis for management
policies. Finally, the concluding remarks are given in
Section 6.
2. SIMULATION FRAMEWORK
In general, traffic simulation models can be cate-
gorized into three classes: macroscopic, mesoscopic,
and microscopic models [8-10]. A mesoscopic model
is more flexible than macroscopic models for model-
ling travel behaviour, such as route choice, and coars-
er than microscopic models for modelling the entity
movement, such as lane changing. This can effectively
reduce computational complexity and ensure the re-
sults with certain accuracy. Therefore, if the precision
is not very high while dealing with a large-scale net-
work, a mesoscopic simulation model would be the
best choice for the traffic simulation.
The mesoscopic simulation framework is shown in
Figure 1. The inputs in the system are the network infor-
mation and available OD demand. The demand simu-
lator separates the multimodal transportation network
into several traffic layers to represent individual traf-
fic modes. In addition, the demand simulator updates
the traffic disutility at the start of each simulation run.
The supply simulator moves the vehicles on the lane
of the network until the end of simulation time. When
the simulation process is complete, the output is the
distribution of traffic flows which can be used in the
traffic analysis.
Transit Vehicle
Generation
Time-dependent OD
Demand
Mode-route Choice
Time-dependent Shortest
Path Algorithm
Passenger
Assignment
Auto Generation
& Assignment
Traffic Cell
Vehicle Movement &
Network Control
Figure 1 - Simulation framework
3. MESOSCOPIC TRAFFIC SIMULATOR
The flowchart of the mesoscopic traffic simulator is
shown in Figure 2. The vehicle simulator is composed
of five modules: vehicle generation module, traffic cell
module, vehicle speed update module, vehicle loca-
tion update module, and vehicle movement module.
3.1 Vehicle generation module
Time-dependent OD demand is considered in the
simulation. The transit vehicles (bus and subway) fol-
low the pre-determined timetable and routes, while
Vehicle Generation
Traffic Cell Update
Vehicle Speed Update
Vehicle Location Update
Record Running Time & Remove
Simulation Clock Pushing
Time for Terminating?
yes
yes
Leaving Network?
Stop and Output
no
no
Figure 2 - Flowchart of the mesoscopic traffic simulator
3. Promet – Traffic&Transportation, Vol. 26, 2014, No. 1, 65-73 67
M. Meng, C. Shao, J. Zeng, C. Dong: A Simulation-Based Dynamic Traffic Assignment Model with Combined Modes
the generation of cars and bicycles is a stochastic
procedure. A Poisson distribution is used to represent
the traffic arrival statistical regularity so that the time
headway follows a negative exponential distribution.
3.2 Traffic cell update module
Vehicles are formed into many groups in the sim-
ulation, which are called traffic cells in MesoTS (Me-
soscopic Traffic Simulator) [11]. Each traffic cell is
composed of vehicles which have the same traffic
dynamics, such as traffic speed, vehicle position. The
composition of the traffic cell varies with the changes
of vehicle speed or position. The model defines first a
standard distance DD (e.g. 60 m) to control the merg-
ing and splitting of traffic cells. The judge distance is
the gap distance between the last vehicle in the lead-
ing traffic cell and the first vehicle in the following traf-
fic cell (see dkj and dji in Figure 3). When the vehicles
are on the same segment, if the distance between two
traffic cells is less than DD, these two traffic cells are
merged into a larger traffic cell as shown by cell i and j
in Figure 3-(a). Otherwise, if the distance between two
vehicles in a traffic cell is greater than DD, this traffic
cell is split into two cells as cell j in Figure 3-(b), where
these two vehicles are the lead vehicle and the tail ve-
hicle, respectively.
3.3 Speed update module
The speed update module updates the speed of
each vehicle in the traffic cells by two traffic modes
[12-13]: cell-following model calculates the speed of
the lead vehicle in a traffic cell; speed-density model
calculates the speed of the tail vehicle in a traffic cell.
The lead vehicle speed in the traffic cell can be ob-
tained as follows:
,
,
v
v
v v
d DD
d DD
1
max
max
ij
i i j
ij
ij
0 1
$
m m
=
+ -
^ h
) (1)
where vij is the cell-following speed of the lead vehicle
in traffic cell i travelling in direction j; vmax is the free
flow speed in the segment; vj0 is the speed of the tail
vehicle in the leading traffic cell j; i
m is a scalar equal
to /
d DD
ij .
The tail vehicle speed in the traffic cell can be ob-
tained as:
,
v v v v
k
k
1
min max min
i
jam
i
0 = + - -
a b
^ c
h m
; E (2)
where vi0 is the speed of the tail vehicle in traffic cell i;
ki is the vehicle density in traffic cell i, which is equal to
the total vehicle length in the traffic cell divided by the
total segment length occupied by the traffic cell; kjam
is the jam density of the segment, which is usually set
to 1; vmin is the minimum traffic speed of the segment,
which is usually set to 0; a, b are the indefinite param-
eters, usually set as .
1 8
a = , .
5 0
b = [11].
The others vehicles in the middle of the traffic cell
are calculated by a linear interpolation based on their
speed:
,
min
v v v v v
k
k
1
min max min
ij
n
ij
jam
n
= + - -
a b
l l
^ c
h m
; E
) 3 (3)
where vij
n
is the speed of the Nth
vehicle in traffic cell i
towards direction j; kn is the traffic density from the Nth
vehicle to the end of the road. In order to make sure
that k k
i n
2 , al, bl are different with a, b in Equation
(1), typically set as .
1 5
a =
l , 3
b =
l in the normal traf-
fic condition.
3.4 Position update module
The vehicle position in the next time step is the cur-
rent position plus the travelled distance. If a bus sta-
9
10 8 k
6 5
7 j
3 1
4 i
2
d > d
kj min
d > d
kj min
d < d
ji min
d > d
ji min
9
10 8
6 5
7 j
3 1
4 i
2
k
(a) Merge
(b) Split
Figure 3 - Merging and splitting of traffic cells
4. M. Meng, C. Shao, J. Zeng, C. Dong: A Simulation-Based Dynamic Traffic Assignment Model with Combined Modes
68 Promet – Traffic&Transportation, Vol. 26, 2014, No. 1, 65-73
tion is located along this link, after leaving the station
the bus may clash with the last vehicle. To avoid this,
the model takes the minimum position between the
last vehicle position and the simulation position as the
updated position.
A channelized section of a certain length is set
for each segment in the simulation. Each channel-
ized lane corresponds to a different turning direction,
where a specific mode-route choice is determined.
Once a vehicle moves near the intersection and into a
channelized lane, it is not allowed to change its turning
direction until it is in the downstream section. Vehicles
in different lanes have no influence on each other.
3.5 Capacity constraints
The model calculates the average time headway in
each update phase. The average time headway deter-
mines the time at which vehicles can move into the
segment:
t t
Q
1
n n 1
= +
- (4)
where tn is the earliest time for the next vehicle enter-
ing the segment; tn 1
- is the time for the last vehicle
entering the segment; Q is the real capacity of the
segment, Q qQ
= r , in which Q
r is the traffic capacity in
one direction; if the intersection is control-signalized,
g is the green/cycle ratio; if the intersection is unsig-
nalized, g is the delay coefficient [14]. If a bus stop is
located along a particular segment, Q
r for this segment
should be reduced in order to represent the bus stop-
ping effect.
A vehicle is allowed into a link only if the simula-
tion time is greater than or equal to tn; otherwise, the
vehicle queues at the node. Meanwhile, the model will
check the vehicle count in the network while updating.
If the end of the last traffic cell reaches the link bound-
ary, no vehicle is allowed into this segment.
4. TIME-DEPENDENT SHORTEST PATH
ALGORITHM
The total simulation time is divided into several
time intervals. Each time interval is also divided into
certain iterative phases according to the system ini-
tialization. The model updates the path travel time at
the beginning of each iterative phase, finds the short-
est path with the k-shortest path algorithm, and finally
assigns the traffic flow based on an improved C-Logit
model.
4.1 Travel utility function
To facilitate the interface of the mode choice mod-
el with the shortest path calculation, the generalized
cost is expressed in units of time (minutes). The result-
ing systematic utility equations are:
.
U C s
0 04722
Sin k
od
=- ^ h (5)
. .
U C s
2 169 0 04722
Com k
od
=- - ^ h (6)
. .
U C s
0 598 0 04722
Tra k
od
=- - ^ h (7)
where Sin = single-car travel mode, Com = combined
car and transit travel mode, Tra = Transit travel mode;
U is the travel utility; C s
k
od
^ h is the generalized traf-
fic cost of path k in time s. Parameters in the above
equations are calibrated by the survey results from the
Beijing Huilongguan residential area.
The travel cost is updated only in the new time in-
terval to reduce the calculation. The generalized travel
cost contains many factors like travel time, travel cost,
travel distance, and so on. Assuming these factors are
independent for each link, the generalized traffic cost
can be expressed as
C s C s
k
od
ak a
od
d
=
^ ^
h h (8)
where ak
d equals 1 if link a lies on path k, otherwise
0; C s
a
od
^ h is the traffic cost of the link a in time s. The
considered travel time and travel cost, C s
a
od
^ h can be
expressed as:
C s T s M s
a
od
t a m a
~ ~
= +
^ ^ ^
h h h (9)
where T s
a^ h is the travel time of link a in time s; M s
a^ h
is the travel cost of link a in time s; t
~ and m
~ are the
weights respectively. The details about the two compo-
nents are discussed further in the text.
Running in an independent space, a subway link is
affected little by external circumstances. Travel time for
a subway is regarded as a deterministic value equal-
ling the subway’s runtime adding the waiting time. The
travel time for a bus includes the bus run time and the
delay time at the bus station which is determined by
the number of travellers getting on and off the bus.
The link travel time for the bicycle and the pri-
vate car is the mean time for many vehicles passing
through. Let tn
k
denote the mean travel time for all ve-
hicles passing through the link at iterative phase n in
time interval k, and let Tn
k
1
- denote the mean travel
time after the previous iterative phase n 1
- in the
same time interval. The link travel time for the bicycle
and the private car can be updated by:
T T
n
t T
1
n
k
n
k
n
k
n
k
1 1
= + -
- -
^ h (10)
The model decides the set of alternative mode-
route choice at the beginning of the next iterative
range according to the updated link travel time Tn
k
. If
no vehicle has passed through the link in a certain it-
erative phase, the link travel time is not updated; if
there are vehicles passing through the link, the mean
link travel time equals the total travel time for all pass-
ing vehicles on the link divided by the total number
of vehicles. Moreover, one case that may arise at the
onset of the simulation is that no vehicle arrives at a
link in the whole time interval, and then the link travel
5. Promet – Traffic&Transportation, Vol. 26, 2014, No. 1, 65-73 69
M. Meng, C. Shao, J. Zeng, C. Dong: A Simulation-Based Dynamic Traffic Assignment Model with Combined Modes
time is equal to the link length divided by the link free-
flow speed.
4.2 Mode-route Choice Model
The nodes in the multi-modal networks can be of
two types: route-choice node and non-route-choice
node. Route-choice nodes are the nodes which con-
nect several downstream nodes, in which the mode-
route choice may be changed. Non-route-choice nodes
are the nodes which connect only one downstream
node with the same traffic mode, in which the travel
route cannot be chosen. Therefore, the model only
needs to make mode-route choices at the route-choice
nodes in the simulation, thereby reducing the calcu-
lation process. Moreover, the route-choice node can
be manually set in a large network for increasing ef-
ficiency.
After calculating the shortest path in the network,
the travel route can be determined by a nested logit
model. Mode-route choice in the simulation is as-
sumed to follow the Stochastic User Equilibrium (SUE)
principle. The mode-route choice probability is deter-
mined by absolute deviation of the path travel time in
the C-Logit model as follows:
exp
exp
P s
bU s CF
bU s CF
k
od
k
od
k
k K
k
od
k
od
=
- -
- -
!
^
^
^
h
h
h
6
6
@
@
/
(11)
where P s
k
od
^ h is the probability for choosing path k in
time s; U s
k
od
^ h is the traffic utility of path k in time s; b
is a non-negative parameter; CFk is the common factor
of path k, and the formulation from Cascetta [15] is
introduced herein as follows:
ln
CF
C C
C C
k
k
od
q
od
k
od
q
od
q Kod
t
=
+
!
v
e o
= G
/ (12)
where t and v are non-negative parameters.
In the real world, however, travellers are more con-
cerned about the relative deviation of the path travel
time. Therefore, the C-logit model is modified as fol-
lows:
exp
exp
P s
b
U s
U s
CF
b
U s
U s
CF
k
od
od
q
od
k
q K
od
k
od
k
od
=
- -
- -
!
^
^
^
^
^
h
h
h
h
h
=
=
G
G
/
(13)
where U s
od
^ h is the average traffic utility.
4.3 Time-dependent K-shortest path algorithm
The assignment procedure in each iterative phase
is achieved by a multi-objective shortest path algo-
rithm. The k-shortest path algorithm [16] is an exten-
sion of the typical Dijkstra algorithm to calculate the
set of the shortest travel time paths between every
origin-destination pair. The primary advantage of this
approach is that it can obtain more than one short-
est path, and determine the distinct set of the short-
est path numbers according to different criteria. The
procedure proposed herein is extended by Kihara et
al. [17] as follows:
Step 0: Initialization. Set time interval TI=1, itera-
tive phase IP=1;
Step 1: Calculate the shortest path which has the
least travel time between the original node
and the destination node by Dijkstra’s Algo-
rithm;
Step 2: Remove all links which belong to Step 1
from the network;
Step 3: Repeat Step 1 and Step 2 k-times, and then
k link-disjoint paths are obtained. If the Di-
jkstra’s algorithm cannot be executed as
the links are all removed, the shortest path
in this IP is founded. The traffic flow can be
assigned based on the mode-route choice
model;
Step 4: If the iterative phase matches the final it-
erative phase in this time interval, TI=TI+1,
else IP=IP+1 and go to Step 1;
Step 5: If the time interval reaches the final time
interval, the algorithm is terminated, else
TI=TI+1 and go to Step 1.
5. EXPERIMENTS AND ANALYSIS
Five sets of simulation experiments were designed
to illustrate the performance and application of the
model. A medium-scale network was used in these ex-
periments as shown in Figure 4, which is an area in the
Chaoyang District in Beijing. The network consists of 5
subway lines (as bold blue lines) with 39 stations (as
yellow nodes), and 188 road links with 122 nodes. The
subway lines overlap with the roads on the same loca-
tions, but in two different layers. A bus line is taken into
consideration only if it has at least four stations in the
study area. Hence, 18 bus lines with 51 stations were
selected as shown in Figure 5. As explained before, a
bicycle link is the road link between an origin /destina-
tion node and a subway station. The bicycle and bus
networks are introduced here for illustrative purposes
only, and do not correspond to available service (which
does not affect the examination of the model).
It is assumed that no traveller would be willing to
transfer more than twice in one trip. Five travel modes
are available for all travellers: private car, park and
ride (P&R), one bus line, bus to transit (bus or sub-
way), bicycle to transit (bus or subway). The propor-
tions for five travel modes and the average travel time
(minute) are recorded as the output results. Travellers
head to the CBD area (the upper part of the network)
from all other zones. All travellers are generated over
6. M. Meng, C. Shao, J. Zeng, C. Dong: A Simulation-Based Dynamic Traffic Assignment Model with Combined Modes
70 Promet – Traffic&Transportation, Vol. 26, 2014, No. 1, 65-73
20 minutes of the peak period between 12 zones. The
iterative phase is 0.5 seconds, and the time interval is
5 minutes. All travellers are assumed to have pre-trip
information on available alternatives, and have the ac-
cess to use a car and a bicycle (own or rent). The free
flow speed and minimum speed of the road are set as
60 km/h and 15 km/h;62 signalized intersections are
assumed to operate under vehicle-actuated two-phase
control, the green ratio is set as 0.45; 60 unsignalized
intersections are set as follows: no control (20 inter-
sections), stop sign control (25 intersections) and yield
sign control (15 intersections). The frequency of the
subway is 15 vehicle/hour. The bus ticket is 1 yuan.
Other parameters are: 18
p = yuan/hour, .
b 3 3
= ,
.
0 5
t
~ = , 1
t = , 2
v = .
The first set of experiments studies the effect of
the different congestion levels. Four OD demand lev-
els are considered in the experiments with regard to
the spatial distribution, the OD trip desires, morning
peak travel pattern. In this experiment, the traffic in-
formation is fully provided, the bus frequency is 12
buses/hour, and parking fee is 6 yuan. Table 1 shows
the effect of the network congestion on mode split
and average travel time. With the increase in network
congestion, more travellers will prefer the transit travel
mode and the combined travel mode. For example, the
proportion of car travel trips decreases from 63.0% for
9,000 OD demand to 60.6% for 15,000 OD demand.
Similarly, the one bus line travel mode increases from
3.5% for 9,000 OD demand to 4.6% for 15,000 OD de-
mand. With the increase of OD demand, transit travel
trip is more attractive than car trip. Meanwhile, the
increase of OD demand also adds the average travel
time nearly in a linear pattern. The average travel time
for the highest OD demand increases by 48.5% com-
pared to the lowest level.
The effect of imposing parking fee on private car
travellers is examined in the second set of experi-
ments. The parking fee which ranges from ¥0 to ¥12 is
applied to all final destinations in the network. In this
experiment, the traffic information is fully provided, the
bus frequency is 12 buses/hour, and the OD demand
is 13,000, the parking fee at transfer node is ¥2. A
private car traveller who transfers to subway or bus to
complete their trip must pay the parking fee and the
transit ticket. Parking fee is assumed to charge for the
entire parking time in one day. The simulation results
are listed in Table 2. It shows that with the increase
of the parking fee, the proportion of private cars is
sharply reduced, while the proportion of park and ride
rises in a certain range, and other travel modes have
Figure 4 - Road network Figure 5 - Bus network
7. Promet – Traffic&Transportation, Vol. 26, 2014, No. 1, 65-73 71
M. Meng, C. Shao, J. Zeng, C. Dong: A Simulation-Based Dynamic Traffic Assignment Model with Combined Modes
not changed much. When the parking fee is ¥0, the
proportion of cars is the highest (75.8%); when the
parking fee is ¥9, the proportion of cars is about 50%,
when the parking fee is ¥12, the proportion of cars to
subway is nearly 40%. Therefore, in this case, if the
management objective for the proportion of cars is
less than 50%, the parking fee should be set at more
than ¥9.00, fewer travellers will choose the car trip be-
cause of high money cost at the destination. On the
other hand, the increase of the parking fee at the final
destination adds to the attractiveness of transit trip
and the combined trip as the advantage of the traffic
cost. Travellers would avoid high parking fees at their
destination to change their travel mode. For example,
the proportion of park-and-ride rises more than twice
from 13.4% to 29.7%, and one bus line trip rises more
than three times from 3.6% to 14.5%. Meanwhile, the
increase of parking fee also adds to the average travel
time as the transfer time and the delay time of transit
increase.
The effect of bus frequency is examined in the third
set of experiments. The bus frequency which ranges
from 3 buses/hour to 15 buses/hour is assumed to
apply to all bus lines in the network. In this experiment,
the traffic information is fully provided, the parking fee
is ¥6.00, and the OD demand is 13,000. The simula-
tion results listed in Table 3 show that with the increase
of the bus frequency, a slight increase in the transit
share is observed. For example, when the bus frequen-
cy increases from 3 buses/hour to 12 buses/hour, the
private car trips drop by 15.0%, the park-and-ride trips
double to 25.3%, and the one-bus line trip increases
almost 3 times to 3.9%. The increase in bus frequency
to 15 buses/hour does not lead to a significant change
in the travelling mode share, but most of the shift trips
choose the one-bus line as the advantage of saving
the transfer time. Therefore, considering the invested
funds, the best bus frequency should be set at about
nearly 12 buses/hour. Meanwhile, the increase of bus
frequency reduces the average travel time as both the
transfer time and the delay time of transit become
smaller.
The fourth set of experiments examines the effect
of traffic information on the travel mode choice. Five
cases are considered in the experiments: full infor-
mation, no car transfer information, no bus transfer
information, no bicycle transfer information, and no
all-transfer information. The traffic information is as-
sumed as the only accessibility for travellers to other
traffic modes. Without transfer information, travellers
Table 1 - Effect of OD demand on travel mode split and traffic assignment
OD demand 9,000 11,000 13,000 15,000
Private Car 63.0% 62.7% 61.5% 60.6%
Park and Ride 24.0% 24.1% 25.3% 25.5%
One Bus Line 3.5% 3.7% 3.9% 4.6%
Bus to Transit 3.0% 3.2% 3.1% 3.2%
Bicycle to Transit 6.4% 6.3% 6.2% 6.1%
Average travel time (min) 16.01 19.34 20.55 23.78
Table 2 - Effect of parking fee on travel mode split and traffic assignment
Parking Fee 0 3 6 9 12
Private Car 75.8% 70.2% 61.5% 51.3% 40.3%
Park-and-Ride 13.4% 17.5% 25.3% 26.6% 29.7%
One Bus Line 3.6% 3.8% 3.9% 8.9% 14.5%
Bus to Transit 2.1% 2.8% 3.1% 6.8% 8.9%
Bicycle to Transit 5.1% 5.7% 6.2% 6.4% 6.6%
Average travel time (min) 20.29 20.38 20.55 20.87 21.21
Table 3 - Effect of bus frequency on travel mode split and traffic assignment
Bus Frequency 3 6 12 15
Private Car 76.5% 63.5% 61.5% 59.0%
Park–and-Ride 14.0% 24.2% 25.3% 25.9%
One-Bus Line 1.3% 3.4% 3.9% 5.5%
Bus to Transit 2.0% 2.4% 3.1% 3.5%
Bicycle to Transit 6.2% 6.4% 6.2% 6.1%
Average travel time (min) 20.86 20.75 20.55 19.97
8. M. Meng, C. Shao, J. Zeng, C. Dong: A Simulation-Based Dynamic Traffic Assignment Model with Combined Modes
72 Promet – Traffic&Transportation, Vol. 26, 2014, No. 1, 65-73
have no opportunity to change their travel mode. The
parking fee is ¥6.00, the bus frequency is 12 buses/
hour, and the OD demand is 13,000. The simulation
results listed in Table 4 show that full information en-
sures the best performance of the network. When the
car transfer information is not provided, the traveller
who drives the car has no opportunity to transfer to
other traffic mode; the private car trip increased from
61.5% to 86.5%, and the average travel time increased
from 20.55 minutes to 21.07 minutes. Similarly, when
the bus transfer information is not provided, the one-
bus line trip will immediately increases from 3.9% to
6.2%; other travel modes do not change so much.
The average travel time will increase more than the
case in which there is no car transfer information from
20.55 minutes to 22.98 minutes. The case in which
no bicycle transfer information is provided, other mode
shares also increase a little. Finally, if no transfer infor-
mation is provided, most of the travellers choose the
private car trip, and the average travel time increases
as the traffic congestion aggravates.
The last set of experiments examines the effect of
car ownership ratio on the travel mode choice. Five
cases of car ownership ratio are considered in the
experiments: 100%, 80%, 60%, 40%, and 20%. The
travellers who do not have a car can only choose the
bus or bicycle trip. In this experiment, the traffic in-
formation is fully provided, the parking fee is ¥6.00,
and the OD demand is 13,000. The simulation results
listed in Table 5 show that as the car ownership ratio
decreases, the public travel trips rise sharply. With the
decrease of car trips, the degree of traffic congestion
is reduced, which leads to the conclusion that the trav-
ellers who have cars will prefer car trips over public
trips. Moreover, the decrease in car ownership will
save the average travel time at first, as the car travel
time decreases. However, when the car ownership ra-
tio decreases to a certain level, the average travel time
will increase with the limitation of the public running
schedule. In our case, the average travel time is the
least when the car ownership ratio is 80%.
6. CONCLUSION
DTA is an important issue in ATMS (Advanced Traf-
fic Management System) and ATIS (Advanced Traveler
Information Systems). Detailed research into DTA prob-
lem is helpful for traffic planning and management.
This paper presents a simulation-based DTA model
considering combined travel modes. The framework
consists of a multi-modal supply network and a me-
soscopic demand simulator. On the supply side, four
traffic modes are included in the urban transportation
network: private car, subway, bus and bicycle. On the
demand side, the interaction between mode-route
choice and traffic assignment is taken into account
in a nested improved C-Logit model. The traffic as-
signment procedure is achieved by a time-dependent
shortest-path algorithm.
Five experiments were designed to illustrate the
performance and application of the model in the
transportation management. These experiments illus-
trate the significance of combining the mode choice
and route choice in the DTA framework and also verify
the efficiency of the time-dependent-shortest path al-
gorithm in the dynamic traffic assignment problem.
Five sets of experiments show that the increase of
OD demand makes the transit trip more attractive,
but increases the average travel time; imposing high
parking fee contributes to improving the proportion of
transit trip; the frequency of the bus service will appeal
to the travellers to shift their travel mode, but not in
Table 4 - Effect of information supply strategies on travel mode split and traffic assignment
Traffic Information Full No Car Transfer No Bus Transfer No Bicycle Transfer No All Transfer
Private Car 61.5% 86.5% 62.5% 64.2% 94.7%
Park-and-Ride 25.3% -- 25.4% 27.7% --
One-Bus Line 3.9% 4.3% 6.2% 4.4% 5.3%
Bus to Transit 3.1% 3.4% -- 3.7% --
Bicycle to Transit 6.2% 6.0% 5.9% -- --
Average travel time (min) 20.55 21.07 22.98 22.14 21.72
Table 5 - Effect of car ownership ratio on travel mode split and traffic assignment
Car Ownership Ratio 100% 80% 60% 40% 20%
Private Car 61.5% 52.6% 42.6% 29.6% 15.6%
Park-and-Ride 25.3% 19.2% 13.4% 8.5% 4.1%
One-Bus Line 3.9% 8.3% 13.3% 18.6% 24.8%
Bus to Transit 3.1% 6.4% 10.4% 14.7% 18.9%
Bicycle to Transit 6.2% 13.6% 20.4% 28.5% 36.6%
Average travel time (min) 20.55 20.04 21.25 23.14 25.22
9. Promet – Traffic&Transportation, Vol. 26, 2014, No. 1, 65-73 73
M. Meng, C. Shao, J. Zeng, C. Dong: A Simulation-Based Dynamic Traffic Assignment Model with Combined Modes
the-more-the-better way; the traffic information service
level influences the traffic assignment which should
be provided completely and timely; the car ownership
ratio has direct impact on the travel mode split, and
proper car ownership ratio would contribute to saving
the travel time. All the sets of experiments are well ap-
plied in the real traffic management with the proposed
simulation-based DTA model.
Further research is planned for improving the algo-
rithm efficiency in large-scale networks and calibrating
the parameters with real data. Time-dependent short-
est path algorithm tends to run fairly slowly, especially
when a large network is involved. Intelligent algorithms
(IA) have an excellent ability in searching for the glob-
ally optimal solution, and can be a direction in later
studies. The use of the model to examine the appli-
cation of APTS/ATIS and management measures are
worth continuing the study.
ACKNOWLEDGEMENT
The work described in this paper is supported by
three research grants from the National Basic Re-
search Program of China (No. 2012CB725403),
the National Natural Science Foundation of China
(51178032, 51338008), the Fundamental Research
Funds for the Central Universities (2013YJS047), and
also supported by World Capital Cities Smooth Traffic
Collaborative Innovation Center.
REFERENCES
[1] Paz, A., Chiu, Y.C.: Adaptive traffic control for large-
scale dynamic traffic assignment applications, Trans-
portation Research Record, Vol. 2263, 2011, pp. 103-
112
[2] Sundaram, S., Koutsopoulos, H.N., Ben-Akiva, M., An-
toniou, C., Balakrishna, R.: Simulation-based dynamic
traffic assignment for short-term planning applica-
tions, Simulation Modelling Practice and Theory, Vol.
19, No. 1, pp. 450-462
[3] Omrani, R., Kattan, L.: Demand and supply calibration
of dynamic traffic assignment models past efforts and
future challenges, Transportation Research Record,
Vol. 2283, 2012, pp. 100-112
[4] Chen, L.W., Hu, T.Y.: Flow equilibrium under dynamic
traffic assignment and signal control-an illustration
of pretimed and actuated signal control policies, IEEE
Transactions on Intelligent Transportation Systems,
Vol. 13, No. 3, 2012, pp. 1266-1276
[5] Caggiani, L., Dell’Orco, M., Marinelli, M., Ottomanelli,
M.: A metaheuristic dynamic traffic assignment model
for O-D matrix estimation using aggregate data, Pro-
ceedings of EWGT 2012 - 15th
Meeting of the Euro
Working Group on Transportation, Paris, France, Vol.
54, 2012, pp. 685-695
[6] Abdelghany, K.F.S.: Stochastic dynamic traffic assign-
ment for intermodal transportation networks with
consistent information supply strategies, Ph.D. thesis,
Civil, Architectural, and Environmental Engineering,
University of Texas, Austin. 2001a
[7] Abdelghany, K.F.S., Mahmassani, H.S.: Dynamic trip
assignment-simulation model for intermodal transpor-
tation networks, Transportation Research Record, Vol.
1771, 2001b, pp. 54-60
[8] Hoseini, S.M.S., Vaziri, M.: Modelling drivers’ behav-
iour as a crash risk reduction process, Promet-Traffic &
Transportation, Vol.20, No. 3, 2008, pp. 139-146
[9] Pei, Y.L, Wang, Y.G., Zhang, Y.: Microscopic model of
automobile lane-changing virtual desire trajectory by
spline curves, Promet-Traffic & Transportation, Vol. 22,
No. 3, 2010, pp. 203-208
[10] Dundovic, C., Bilic, M., Dvornik, J.: Contribution to the
development of a simulation model for a seaport in
specific operating conditions, Promet-Traffic & Trans-
portation, Vol. 21, No. 5, 2009, pp. 331-340
[11] Yang, Q.D.: A simulation laboratory for evaluation of
dynamic traffic management systems, Ph.D. thesis,
Massachusetts Institute of Technology, Boston, 1997
[12] Namekawa, M., Ueda, F., Hioki, Y., Ueda, Y., Satoh, A.:
General purpose road traffic simulation system with a
cell automaton model, International Congress on Mod-
elling and Simulation (MODSIM05), Melbourne, Austra-
lia, Dec. 2005
[13] Bham, G.H., Benekohal, R.F.: A high fidelity traffic sim-
ulation model based on cellular automata and car-fol-
lowing concepts, Transportation Research Part C, Vol.
12, No. 1, 2004, pp. 1-32
[14] McShane, W. R., Roger P. R.: Traffic Engineering. 1990
[15] Cascetta, M., Nuzzolo, A., Russo, F., Vitetta. A.: A
modified logit route choice model overcoming path
overlapping problems: specification and some calibra-
tion results for interurban networks, 13th
International
Symposium on Transportation and Traffic Theory, Lyon,
France, July 1996
[16] Ziliaskopoulos, A.: Optimum path algorithms on mul-
tidimensional networks: analysis, design, implemen-
tation, and computational experience, Ph.D. thesis,
Department of Civil Engineering, University of Texas,
Austin, 1994
[17] Kihara, T.S., Shimizu, Y., Arakawa, N., Shiba, K.: Fast
link-disjoint path algorithm on parallel reconfigurable
processor DAPDNA-2, 14th
Asia-Pacific Conference on
Communications (APCC2008), Tokyo, Japan, Oct. 2008