5.5 ohms law
•Download as PPTX, PDF•
1 like•2,410 views
This document provides instruction on Ohm's Law, including learning objectives to investigate the relationship between voltage (V), current (I), and resistance (R). It presents Ohm's Law that current (I) equals voltage (V) divided by resistance (R), and includes examples of calculating current given voltage and resistance. Practice questions are provided for students to calculate values using Ohm's Law.
Report
Share
Report
Share
Recommended
3 ohm's law
The document discusses the relationships between current, voltage, and resistance according to Ohm's Law. It provides examples of applying Ohm's Law to calculate values in different circuit scenarios, such as calculating current given voltage and resistance. It also explains key concepts, including that resistance remains constant for a material, and that increases in voltage correspond to increases in current. The document aims to illustrate how Ohm's Law can be used to analyze electrical circuits.
Basic Electronics - Ohm's Law
This presentation is an introduction to electrical theory and will help the reader understand some of the terminology used when we discuss controlling external devices using the GPIO port of the Raspberry Pi.
We look at Voltage, Current & Resistance and the relationship between the three known as Ohm’s Law.
Ohm’s law
This presentation provides an overview of Ohm's Law, which describes the relationship between voltage, current, and resistance in electrical circuits. It defines each variable, explains their units of measurement, and how they relate to one another. The objectives are for students to understand the variables, their relationships, and how to use the formula to compute a missing value. Examples are provided to demonstrate solving for voltage, current, and resistance.
resistance [Ohm's law]
Ohm's law defines the relationship between voltage (V), current (I), and resistance (R) in circuits. V=IR, where V is measured in volts, I in amps, and R in ohms. Resistivity is a measure of how strongly a material opposes the flow of electric current and is represented by the Greek letter rho. It depends on the material's properties but not the size or shape of the object. In series circuits, the current is the same in each component and the total voltage is the sum of the individual voltages. In parallel circuits, the voltage is the same across each branch while the total current is the sum of the branch currents.
Electricity
This document discusses electricity, circuits, Ohm's Law, and series and parallel circuits. It defines key terms like resistance (R), current (I), and voltage (V) and explains how they relate according to Ohm's Law (I=V/R). It discusses how total resistance, current, and voltage are calculated for series and parallel circuits. Key facts about resistivity and how it affects resistance are also summarized. Diagrams and examples are provided to illustrate these circuit concepts.
Wiring Part 4 : ohms law
This PowerPoint gives the information about Ohms law also explains different terms related to Ohms law ….
Basic Information of Ohm's law
Ohm's law defines the relationship between voltage, current, and resistance in electrical circuits. It states that if voltage is applied to a resistance, current will flow and power will be consumed. The law establishes that voltage is measured in volts, current in amps, and resistance in ohms. Using Ohm's law, electricians can calculate any two of these values if the third is known. Understanding Ohm's law is essential for designing and troubleshooting electrical and electronic circuits.
Current & Ohms Law 03 2000
This document provides an overview of basic electricity concepts including current, Ohm's law, and circuit components. It defines current as the rate of electron flow measured in amperes. Ohm's law states that current is directly proportional to voltage and inversely proportional to resistance. The document explains how Ohm's law can be used to calculate any of the variables in a circuit if two are known. Circuit diagrams and the water analogy are used to illustrate these concepts.
Recommended
3 ohm's law
The document discusses the relationships between current, voltage, and resistance according to Ohm's Law. It provides examples of applying Ohm's Law to calculate values in different circuit scenarios, such as calculating current given voltage and resistance. It also explains key concepts, including that resistance remains constant for a material, and that increases in voltage correspond to increases in current. The document aims to illustrate how Ohm's Law can be used to analyze electrical circuits.
Basic Electronics - Ohm's Law
This presentation is an introduction to electrical theory and will help the reader understand some of the terminology used when we discuss controlling external devices using the GPIO port of the Raspberry Pi.
We look at Voltage, Current & Resistance and the relationship between the three known as Ohm’s Law.
Ohm’s law
This presentation provides an overview of Ohm's Law, which describes the relationship between voltage, current, and resistance in electrical circuits. It defines each variable, explains their units of measurement, and how they relate to one another. The objectives are for students to understand the variables, their relationships, and how to use the formula to compute a missing value. Examples are provided to demonstrate solving for voltage, current, and resistance.
resistance [Ohm's law]
Ohm's law defines the relationship between voltage (V), current (I), and resistance (R) in circuits. V=IR, where V is measured in volts, I in amps, and R in ohms. Resistivity is a measure of how strongly a material opposes the flow of electric current and is represented by the Greek letter rho. It depends on the material's properties but not the size or shape of the object. In series circuits, the current is the same in each component and the total voltage is the sum of the individual voltages. In parallel circuits, the voltage is the same across each branch while the total current is the sum of the branch currents.
Electricity
This document discusses electricity, circuits, Ohm's Law, and series and parallel circuits. It defines key terms like resistance (R), current (I), and voltage (V) and explains how they relate according to Ohm's Law (I=V/R). It discusses how total resistance, current, and voltage are calculated for series and parallel circuits. Key facts about resistivity and how it affects resistance are also summarized. Diagrams and examples are provided to illustrate these circuit concepts.
Wiring Part 4 : ohms law
This PowerPoint gives the information about Ohms law also explains different terms related to Ohms law ….
Basic Information of Ohm's law
Ohm's law defines the relationship between voltage, current, and resistance in electrical circuits. It states that if voltage is applied to a resistance, current will flow and power will be consumed. The law establishes that voltage is measured in volts, current in amps, and resistance in ohms. Using Ohm's law, electricians can calculate any two of these values if the third is known. Understanding Ohm's law is essential for designing and troubleshooting electrical and electronic circuits.
Current & Ohms Law 03 2000
This document provides an overview of basic electricity concepts including current, Ohm's law, and circuit components. It defines current as the rate of electron flow measured in amperes. Ohm's law states that current is directly proportional to voltage and inversely proportional to resistance. The document explains how Ohm's law can be used to calculate any of the variables in a circuit if two are known. Circuit diagrams and the water analogy are used to illustrate these concepts.
Study of Ohm's law.
This experiment aims to verify Ohm's law by studying the relationship between voltage, current, and resistance in a circuit. A simple resistive circuit is constructed using resistors, an ammeter, voltmeter, variable power supply, breadboard, and connecting wires. Voltage and current measurements are recorded in a data table for various trials while keeping resistance constant. The results show the ratio of potential difference and current remains constant, demonstrating voltage is directly proportional to current as predicted by Ohm's law.
Ohm’s law
Georg Simon Ohm was a German physicist born in 1789 who discovered Ohm's Law, which states that the current through a conductor is directly proportional to the voltage applied and inversely proportional to the resistance of the conductor. Ohm spent nine years studying electric circuits experimentally and took great care to ensure accuracy in his experiments. In 1827, he was able to show from his experiments the simple mathematical relationship between resistance, current, and voltage that became known as Ohm's Law. Ohm's Law can be expressed as V=IR, where V is voltage, I is current, and R is resistance.
Ohms Law
The document discusses Ohm's law and basic circuit concepts. It defines key terms like current, voltage, resistance, and explains how these relate through Ohm's law. Circuits can be connected in series or parallel, and this affects how current and voltage are distributed. While ideal resistors follow Ohm's law linearly, real components like light bulbs become less linear as they heat up and their resistance changes. Experiments are described to illustrate these concepts using light bulbs and circuits.
Ohms law
This document provides an overview of a course on basic electricity and Ohm's Law. The course covers topics such as atomic structure, electric charges, definitions of power, voltage, current and resistance. It examines units of measurement, proper methods for checking voltage and current, and circuit types including series, parallel and combination circuits. The textbook for the course is listed.
Resistance
This document discusses resistance in electrical circuits. It begins by defining resistance as anything that resists or opposes the flow of electric current. It then states Ohm's Law, which establishes the direct relationship between voltage, current, and resistance in a circuit. The document explains how resistance is measured in Ohms and discusses factors that affect resistance such as material, cross-sectional area, length, and temperature. Graphs and examples are provided to illustrate these concepts.
Ohms Law
Ohm's law defines the relationship between voltage, current, and resistance in a circuit. It states that current is directly proportional to voltage and inversely proportional to resistance. The amount of current, voltage, or resistance in a circuit can be calculated if two of the three values are known using the equation: I = V/R
Some key points about Ohm's law include:
- Voltage is measured in volts (V), current in amps (A), and resistance in ohms (Ω)
- Ohm's law can be rearranged to solve for any of the three circuit variables
- Examples are provided to demonstrate calculating unknown values given two known values
Ohm's law
Ohm's law describes the relationship between voltage, current, and resistance in an electrical circuit. It states that the current through a conductor between two points is directly proportional to the voltage across the two points, and inversely proportional to the resistance between them. Voltage is the "push" or pressure behind current flow, measured in volts. Current is the quantity of electrical flow through a circuit, measured in amps. Resistance opposes the flow of current and is measured in ohms. Ohm's law can be expressed as formulas to calculate voltage, current, or resistance when two of the three values are known.
Ohm's law
The document discusses the basic components and relationships in electrical circuits. It explains that all circuits require a voltage source to provide energy to electrons, a conductor to carry the electrons, and a load or resistance where energy is extracted. It defines key electrical quantities like voltage, current, resistance, and Ohm's Law, which states that current is directly proportional to voltage and inversely proportional to resistance. The document also discusses how internal resistance affects the terminal voltage available from a source.
Ohms law
Ohm's law explains the relationship between voltage, current, and resistance in a circuit. Voltage is the pressure behind current flow, measured in volts. Current refers to the quantity of electrical flow, measured in amps. Resistance opposes current flow, measured in ohms. According to Ohm's law, if voltage is constant, increasing resistance decreases current, and decreasing resistance increases current.
Fairylights...Principles and Definition of Ohms Law
This document discusses Ohm's law and basic electrical circuit principles. It defines resistance, current, voltage, and other concepts. It explains that Ohm's law states that voltage is directly proportional to current. Kirchhoff's laws are also summarized, including that current is the same in series circuits and the total current into a parallel branch equals the total current out. Examples are provided of calculating resistance using Ohm's law and of the effects of adding components like cells or lamps to series and parallel circuits.
Ohm's law Presentation(gub abu bakar siddik )
Ohm's law states that the current through a conductor is directly proportional to the voltage applied. The document describes an experiment to demonstrate Ohm's law using a circuit with a fixed resistor. Voltage is varied using a DC power supply while current is measured with an ammeter. Measurements of voltage and current are recorded and their ratio is calculated and found to be approximately constant, demonstrating Ohm's law. A graph of voltage versus current shows a linear relationship, further confirming Ohm's law.
POWER LAW
This document discusses power law, which relates power, voltage, current and resistance in electrical circuits. It defines power law formulas and teaches how to use them to calculate different circuit parameters. Examples are provided to demonstrate calculating power, voltage, current and resistance given values of other parameters. The learning objectives are to define power law, review scientific notation and metric prefixes, and use Ohm's and power laws to calculate circuit values.
Ohm’s law
1. The document discusses Ohm's Law and describes how voltage, current, and resistance are related. It defines key concepts like voltage, current, resistance, direct current, alternating current, series and parallel circuits.
2. Formulas for calculating current, voltage, resistance and power in series and parallel circuits are presented along with examples of using Ohm's Law to solve circuit problems.
3. The document concludes with exercises to test the reader's understanding of concepts covered.
Electricity
Electricity can flow through circuits due to electric current, which is the flow of positive charges opposite to electrons. Voltage causes current to flow and is measured in volts, while resistance from atoms impedes current flow and is measured in ohms. Ohm's law states that voltage equals current times resistance.
ohm's law
This document summarizes key concepts from Ohm's law, Gauss' law, and Faraday's law. It begins with an introduction to Ohm's law, relating current, voltage, and resistance. It then discusses Gauss' law and its applications to point charges and charge distributions. Finally, it covers Faraday's law, explaining magnetic flux, Lenz's law, and how changing magnetic flux induces an electromotive force. Key equations for each law are also provided.
Ohms law
Ohm's Law describes the relationship between voltage, current, and resistance in an electrical circuit. Voltage is the "push" of electricity and is measured in volts. Current is the flow of electricity and is measured in amps. Resistance opposes the flow of current and is measured in ohms. Ohm's Law states that current is directly proportional to voltage and inversely proportional to resistance. Using Ohm's Law, the voltage, current, or resistance in a circuit can be calculated if two of the three values are known. Resistors are used to decrease voltage in a circuit and are marked with color bands to indicate their resistance value. Circuits can be connected in series or parallel, and understanding circuit diagrams
ohm's law and circuits
This document discusses Ohm's law and basic circuit concepts. It defines key terms like voltage, current, resistance, power, and energy. It explains that voltage is directly proportional to current based on Ohm's law. Circuits can be connected in series or parallel, and examples show how to calculate current, voltage, resistance, and power in different circuit configurations using Ohm's law.
ppt Ohm's law
1) Ohm's Law states that the current through a conductor is directly proportional to the voltage applied across it. It is represented by the equation V=IR, where V is the voltage, I is the current, and R is the resistance.
2) In a series circuit, the current is the same through all components as there is only one path for current to flow. The total resistance is the sum of the individual resistances.
3) In a parallel circuit, the voltage is the same across all branches as there are multiple paths for current to flow forming closed loops. The total resistance is lower than any single resistance.
8-2 Electric Current
Electric current is the steady flow of electrons through a conductor. It is measured in amps. Direct current flows in one direction, while alternating current regularly reverses direction. Voltage is the "push" that causes electrons to flow and is measured in volts. Resistance slows the flow of electrons and is measured in ohms. Ohm's Law mathematically shows the relationship between current (I), voltage (V), and resistance (R) such that V=IR. Sample problems demonstrate calculating voltage, current, and resistance using Ohm's Law.
Ohm's Law.pptx
Ohm's law states that the voltage in a circuit is directly proportional to the current flowing through it, for a given resistance. Mathematically, this is expressed as V = IR, where V is the voltage, I is the current, and R is the resistance. The document provides an example problem demonstrating how to use Ohm's law to calculate voltage given current and resistance. It also explains that Georg Ohm formulated this relationship between voltage, current, and resistance for most materials, though some are non-ohmic.
How does electricity work - Ohm's Law Clearly Explained
The document discusses Ohm's law and resistance. It states Ohm's law as V = I x R, where V is voltage, I is current, and R is resistance. Resistance is defined as the opposition to current flow and depends on the material's resistivity as well as its length and cross-sectional area. An electric circuit requires a source of power, a load, and a means of transmission for current to flow. Ohm's law describes the relationship between voltage, current, and resistance in a circuit.
MODULE 1.ppt
This document provides an overview of key concepts in electric circuits including:
- Defining voltage, current, resistance, power and energy.
- Describing DC circuits and stating Ohm's law.
- Explaining series, parallel and combination connections of resistors.
- Describing Faraday's laws of electromagnetic induction and Fleming's right hand rule.
- Explaining the working of single loop AC generators and terms related to AC circuits.
- Briefly explaining AC through resistance, inductance and capacitance.
More Related Content
What's hot
Study of Ohm's law.
This experiment aims to verify Ohm's law by studying the relationship between voltage, current, and resistance in a circuit. A simple resistive circuit is constructed using resistors, an ammeter, voltmeter, variable power supply, breadboard, and connecting wires. Voltage and current measurements are recorded in a data table for various trials while keeping resistance constant. The results show the ratio of potential difference and current remains constant, demonstrating voltage is directly proportional to current as predicted by Ohm's law.
Ohm’s law
Georg Simon Ohm was a German physicist born in 1789 who discovered Ohm's Law, which states that the current through a conductor is directly proportional to the voltage applied and inversely proportional to the resistance of the conductor. Ohm spent nine years studying electric circuits experimentally and took great care to ensure accuracy in his experiments. In 1827, he was able to show from his experiments the simple mathematical relationship between resistance, current, and voltage that became known as Ohm's Law. Ohm's Law can be expressed as V=IR, where V is voltage, I is current, and R is resistance.
Ohms Law
The document discusses Ohm's law and basic circuit concepts. It defines key terms like current, voltage, resistance, and explains how these relate through Ohm's law. Circuits can be connected in series or parallel, and this affects how current and voltage are distributed. While ideal resistors follow Ohm's law linearly, real components like light bulbs become less linear as they heat up and their resistance changes. Experiments are described to illustrate these concepts using light bulbs and circuits.
Ohms law
This document provides an overview of a course on basic electricity and Ohm's Law. The course covers topics such as atomic structure, electric charges, definitions of power, voltage, current and resistance. It examines units of measurement, proper methods for checking voltage and current, and circuit types including series, parallel and combination circuits. The textbook for the course is listed.
Resistance
This document discusses resistance in electrical circuits. It begins by defining resistance as anything that resists or opposes the flow of electric current. It then states Ohm's Law, which establishes the direct relationship between voltage, current, and resistance in a circuit. The document explains how resistance is measured in Ohms and discusses factors that affect resistance such as material, cross-sectional area, length, and temperature. Graphs and examples are provided to illustrate these concepts.
Ohms Law
Ohm's law defines the relationship between voltage, current, and resistance in a circuit. It states that current is directly proportional to voltage and inversely proportional to resistance. The amount of current, voltage, or resistance in a circuit can be calculated if two of the three values are known using the equation: I = V/R
Some key points about Ohm's law include:
- Voltage is measured in volts (V), current in amps (A), and resistance in ohms (Ω)
- Ohm's law can be rearranged to solve for any of the three circuit variables
- Examples are provided to demonstrate calculating unknown values given two known values
Ohm's law
Ohm's law describes the relationship between voltage, current, and resistance in an electrical circuit. It states that the current through a conductor between two points is directly proportional to the voltage across the two points, and inversely proportional to the resistance between them. Voltage is the "push" or pressure behind current flow, measured in volts. Current is the quantity of electrical flow through a circuit, measured in amps. Resistance opposes the flow of current and is measured in ohms. Ohm's law can be expressed as formulas to calculate voltage, current, or resistance when two of the three values are known.
Ohm's law
The document discusses the basic components and relationships in electrical circuits. It explains that all circuits require a voltage source to provide energy to electrons, a conductor to carry the electrons, and a load or resistance where energy is extracted. It defines key electrical quantities like voltage, current, resistance, and Ohm's Law, which states that current is directly proportional to voltage and inversely proportional to resistance. The document also discusses how internal resistance affects the terminal voltage available from a source.
Ohms law
Ohm's law explains the relationship between voltage, current, and resistance in a circuit. Voltage is the pressure behind current flow, measured in volts. Current refers to the quantity of electrical flow, measured in amps. Resistance opposes current flow, measured in ohms. According to Ohm's law, if voltage is constant, increasing resistance decreases current, and decreasing resistance increases current.
Fairylights...Principles and Definition of Ohms Law
This document discusses Ohm's law and basic electrical circuit principles. It defines resistance, current, voltage, and other concepts. It explains that Ohm's law states that voltage is directly proportional to current. Kirchhoff's laws are also summarized, including that current is the same in series circuits and the total current into a parallel branch equals the total current out. Examples are provided of calculating resistance using Ohm's law and of the effects of adding components like cells or lamps to series and parallel circuits.
Ohm's law Presentation(gub abu bakar siddik )
Ohm's law states that the current through a conductor is directly proportional to the voltage applied. The document describes an experiment to demonstrate Ohm's law using a circuit with a fixed resistor. Voltage is varied using a DC power supply while current is measured with an ammeter. Measurements of voltage and current are recorded and their ratio is calculated and found to be approximately constant, demonstrating Ohm's law. A graph of voltage versus current shows a linear relationship, further confirming Ohm's law.
POWER LAW
This document discusses power law, which relates power, voltage, current and resistance in electrical circuits. It defines power law formulas and teaches how to use them to calculate different circuit parameters. Examples are provided to demonstrate calculating power, voltage, current and resistance given values of other parameters. The learning objectives are to define power law, review scientific notation and metric prefixes, and use Ohm's and power laws to calculate circuit values.
Ohm’s law
1. The document discusses Ohm's Law and describes how voltage, current, and resistance are related. It defines key concepts like voltage, current, resistance, direct current, alternating current, series and parallel circuits.
2. Formulas for calculating current, voltage, resistance and power in series and parallel circuits are presented along with examples of using Ohm's Law to solve circuit problems.
3. The document concludes with exercises to test the reader's understanding of concepts covered.
Electricity
Electricity can flow through circuits due to electric current, which is the flow of positive charges opposite to electrons. Voltage causes current to flow and is measured in volts, while resistance from atoms impedes current flow and is measured in ohms. Ohm's law states that voltage equals current times resistance.
ohm's law
This document summarizes key concepts from Ohm's law, Gauss' law, and Faraday's law. It begins with an introduction to Ohm's law, relating current, voltage, and resistance. It then discusses Gauss' law and its applications to point charges and charge distributions. Finally, it covers Faraday's law, explaining magnetic flux, Lenz's law, and how changing magnetic flux induces an electromotive force. Key equations for each law are also provided.
Ohms law
Ohm's Law describes the relationship between voltage, current, and resistance in an electrical circuit. Voltage is the "push" of electricity and is measured in volts. Current is the flow of electricity and is measured in amps. Resistance opposes the flow of current and is measured in ohms. Ohm's Law states that current is directly proportional to voltage and inversely proportional to resistance. Using Ohm's Law, the voltage, current, or resistance in a circuit can be calculated if two of the three values are known. Resistors are used to decrease voltage in a circuit and are marked with color bands to indicate their resistance value. Circuits can be connected in series or parallel, and understanding circuit diagrams
ohm's law and circuits
This document discusses Ohm's law and basic circuit concepts. It defines key terms like voltage, current, resistance, power, and energy. It explains that voltage is directly proportional to current based on Ohm's law. Circuits can be connected in series or parallel, and examples show how to calculate current, voltage, resistance, and power in different circuit configurations using Ohm's law.
ppt Ohm's law
1) Ohm's Law states that the current through a conductor is directly proportional to the voltage applied across it. It is represented by the equation V=IR, where V is the voltage, I is the current, and R is the resistance.
2) In a series circuit, the current is the same through all components as there is only one path for current to flow. The total resistance is the sum of the individual resistances.
3) In a parallel circuit, the voltage is the same across all branches as there are multiple paths for current to flow forming closed loops. The total resistance is lower than any single resistance.
8-2 Electric Current
Electric current is the steady flow of electrons through a conductor. It is measured in amps. Direct current flows in one direction, while alternating current regularly reverses direction. Voltage is the "push" that causes electrons to flow and is measured in volts. Resistance slows the flow of electrons and is measured in ohms. Ohm's Law mathematically shows the relationship between current (I), voltage (V), and resistance (R) such that V=IR. Sample problems demonstrate calculating voltage, current, and resistance using Ohm's Law.
What's hot (19)
Fairylights...Principles and Definition of Ohms Law
Fairylights...Principles and Definition of Ohms Law
Similar to 5.5 ohms law
Ohm's Law.pptx
Ohm's law states that the voltage in a circuit is directly proportional to the current flowing through it, for a given resistance. Mathematically, this is expressed as V = IR, where V is the voltage, I is the current, and R is the resistance. The document provides an example problem demonstrating how to use Ohm's law to calculate voltage given current and resistance. It also explains that Georg Ohm formulated this relationship between voltage, current, and resistance for most materials, though some are non-ohmic.
How does electricity work - Ohm's Law Clearly Explained
The document discusses Ohm's law and resistance. It states Ohm's law as V = I x R, where V is voltage, I is current, and R is resistance. Resistance is defined as the opposition to current flow and depends on the material's resistivity as well as its length and cross-sectional area. An electric circuit requires a source of power, a load, and a means of transmission for current to flow. Ohm's law describes the relationship between voltage, current, and resistance in a circuit.
MODULE 1.ppt
This document provides an overview of key concepts in electric circuits including:
- Defining voltage, current, resistance, power and energy.
- Describing DC circuits and stating Ohm's law.
- Explaining series, parallel and combination connections of resistors.
- Describing Faraday's laws of electromagnetic induction and Fleming's right hand rule.
- Explaining the working of single loop AC generators and terms related to AC circuits.
- Briefly explaining AC through resistance, inductance and capacitance.
ABE Review Class July 2022.pptx
This document discusses conductors, insulators, semiconductors, direct current, alternating current, current, voltage, resistance, Ohm's law, series circuits, parallel circuits, series-parallel circuits, electric power, inductors, inductive reactance, and time constants in LR series circuits. Key concepts covered include the definitions of conductors, insulators, and semiconductors; Ohm's law formulas; formulas for calculating total resistance, current, and voltage in series, parallel, and series-parallel circuits; power formulas; inductance formulas for inductors in series and parallel; and expressions for calculating current and induced emf in LR series circuits.
PP_ohms%20law.pptx
Georg Ohm published his law of electromagnetism in 1865, which related voltage, current, and resistance in circuits. It states that voltage equals current times resistance (V=IR). This established that increasing resistance requires increasing voltage to maintain the same current. Ohm discovered that different materials have different resistances, and this resistance determines how much voltage is needed to drive a certain current. His law is fundamental to electrical engineering and laid the foundation for much of the modern electrical sciences.
Unit-7-Lesson-1-2.pptx
1. The document describes key electrical concepts including voltage, current, resistance, and Ohm's Law. It defines each term and discusses the relationships between the quantities according to Ohm's Law.
2. Ohm's Law states that current is directly proportional to voltage and inversely proportional to resistance. It can be expressed as V=IR, where V is voltage, I is current, and R is resistance.
3. Examples are provided to demonstrate using Ohm's Law to calculate voltage, current, or resistance given two of the three values. Questions are also included for the reader to practice applying Ohm's Law.
Electric current and_ohms_law1
the presentation explain about electric current , conventional current its direction ,ohms law and series and parallel combination of resistances
Current electricity
Current electricity involves the flow of electric charge through a conductor. A potential difference, known as voltage, is needed to drive the flow of charge from a point of high electric potential to low electric potential.
Potential difference is the work done per unit charge to move electric charge from one point to another. It is measured in volts. Electromotive force is the potential difference across the terminals of a device like a cell or generator when no current is flowing. A cell provides an electromotive force that sets up a potential difference across circuit components, driving current through them.
Resistance opposes the flow of electric current in a circuit. Resistance depends on the material, length, cross-sectional area, and temperature
Ohm's law
This document contains notes from a lesson on Ohm's Law, including definitions of voltage, current, resistance, and how they relate through Ohm's Law. It discusses how resistance affects current and provides examples of calculating current or resistance given two of the three values. The document also discusses electric shock and how the risk depends on voltage, current, and body resistance, and provides examples of calculating current through the body in different scenarios.
L6.ppt
This document discusses key concepts in medical physics related to electric current and circuits. It begins by defining electric current as the flow of charge and discusses its units. It then explains how potential difference and a conduction pathway are needed to produce current. Electromotive force is introduced as the maximum potential difference provided by a battery due to chemical reactions. Ohm's law relates current, voltage, and resistance. Resistors in series and parallel are examined. Alternating current is also covered.
8-2 Electric Current
Electric current is the steady flow of electrons through a conductor. It is measured in amps. Direct current flows in one direction, while alternating current regularly reverses direction. Voltage is the "push" that causes electrons to flow and is measured in volts. Resistance slows the flow of electrons and is measured in ohms. Ohm's Law mathematically shows the relationship between current (I), voltage (V), and resistance (R) as V=IR. Sample problems demonstrate calculating voltage, current, and resistance using Ohm's Law.
Introducción a la Electrónica básica (UT).pptx
This document provides an introduction to electricity for industrial engineering. It outlines 3 units of study: 1) analysis of AC electrical circuits including phasors, RCL circuits, and power factors; 2) electric power supply including generation principles, transformers, and alternative energy sources; and 3) residential, commercial, and industrial electrical installations including design, validation, CAD simulation, and energy saving. Key electrical concepts such as charge, voltage, current, resistance, and Ohm's law are also explained.
The Applications and Limitations of Ohm.pdf
Ohm's law states that in a circuit, the current is directly proportional to the voltage and inversely proportional to the resistance. It can be expressed as V=IR, where V is the voltage, I is the current, and R is the resistance. Ohm's law applies to ohmic conductors that show a linear relationship between voltage and current, but not to non-ohmic conductors. It is useful for calculating values in circuits and understanding many electrical devices and applications in daily life. However, it has limitations and does not apply to certain nonlinear or non-metallic components.
Current, resistance and electromotive force
This document discusses key concepts related to electric current including:
1. The difference between conventional and non-conventional current and how current is defined as the flow of electric charge.
2. How drift velocity relates to current and how current density is calculated based on charge passing through an area over time.
3. How different materials affect current flow based on their charge carriers and properties like resistivity.
4. The definitions of direct current, alternating current, resistance, resistivity, electromotive force and their relationships defined by Ohm's Law.
5. Examples are given of calculating values like current, resistance and electromotive force using relationships between these concepts.
Basic Elec 1.pptx
This document defines basic electrical concepts and components. It aims to explain electricity, current, voltage, resistance, Ohm's law, and the differences between alternating current (AC) and direct current (DC). Key points covered include the basic particles that make up electric charge, the three classifications of materials as conductors, insulators or semiconductors, circuit diagrams, and formulas for power, current, voltage and resistance.
current, voltage and resistance
The document discusses key concepts about electricity including:
- Electric current is the flow of charged particles in a circuit. It is measured in amperes.
- Voltage is the electric potential difference between two points in a circuit. It drives the electric current and is measured in volts.
- Resistance opposes the flow of current and is measured in ohms. It varies based on the material's properties.
- Ohm's law states the relationship between current, voltage, and resistance in a circuit. Increased resistance decreases current.
Circular pararel series
1. The document summarizes an experiment on arranging resistors in series and parallel circuits. The objectives were to learn about and measure current and voltage in such circuits.
2. Key concepts covered include how current and voltage are distributed in series versus parallel circuits based on Ohm's law. In series circuits, the same current flows through each resistor while the voltages add up. In parallel circuits, the same voltage is applied to each resistor while the currents combine.
3. The experiment involved assembling series and parallel circuits on a project board using colored resistors, a power supply, and multimeter. Current and voltage measurements were taken for each circuit and recorded in tables to analyze.
Electrical Charges & Ohm’s Law.ppt
1) The document discusses electrical concepts including charge, current, voltage, resistance, and Ohm's Law. It defines these concepts and explains their relationships.
2) Resistance is a measure of how strongly an object resists current flow. Ohm's Law states that current is directly proportional to voltage and inversely proportional to resistance.
3) The document provides examples of applying Ohm's Law to calculate current given voltage and resistance. It also discusses common electrical components like resistors, conductors, and insulators.
Ohm’s law
This presentation introduces Ohm's Law, which states that the current through a conductor between two points is directly proportional to the voltage applied across the two points. It defines the variables in Ohm's Law as voltage (V), current (I), and resistance (R). It explains the relationships between the variables and how to solve for any one variable given values for the other two.
Ohmslaw power (002)
This document defines key electrical terms like voltage, current, and resistance. It explains that voltage is measured in volts and is the amount of energy per charge moving electrons. Current is measured in amperes and is the rate of charge flow. Resistance is measured in ohms and is the opposition to current flow. Ohm's Law is introduced, which gives the relationship between voltage, current, and resistance as V=IR. Examples are given to show how to use Ohm's Law to calculate current in different circuit scenarios. The document concludes by providing practice problems for readers to solidify their understanding of these concepts.
Similar to 5.5 ohms law (20)
How does electricity work - Ohm's Law Clearly Explained
How does electricity work - Ohm's Law Clearly Explained
More from mrrayner
7La/1
The document summarizes key facts about the Earth:
1) The planet we live on is called Earth. It gets its heat and light from the Sun. The Moon is Earth's natural satellite and orbits Earth once every 28 days.
2) A diagram labels that one side of Earth experiences nighttime while the other experiences daytime due to its rotation on its axis.
3) Additional facts provided are that Earth's year has 365 days, a leap year occurs every 4 years, Earth orbits the Sun in 365.25 days, and Earth completes one spin every 24 hours.
7 l1 the earth in space
A day is the time it takes for the Earth to spin on its axis. A month is the time it takes for the Moon to orbit the Earth. A year is the time it takes for the Earth to orbit once around the Sun. The document contains information about the definitions of a day, month, and year according to the movement and positions of the Earth, Moon, and Sun in space. It also lists learning objectives about describing and explaining the motions that cause days, months, years, and seasons.
7 l target sheet
This document outlines learning objectives related to understanding the motion of objects in space, including: how the Earth revolves around the sun and rotates on its axis, causing day/night and seasons; how the tilt of the Earth's axis causes seasons; why we see phases of the Moon and solar/lunar eclipses occur; how to distinguish between stars and planets based on their motion; and how our understanding of the universe has developed over time through scientific observation.
Making a loudspeaker
Sounds are produced by vibrations that travel through a medium such as air. The document discusses how to construct and test a loudspeaker. It instructs the reader to plug in the speaker, turn on the voltage, switch it on at the mains, and listen as they move their ear closer to identify how the sound changes and what causes this. The learning objectives are to describe how sounds are produced, construct a loudspeaker, and explain how a loudspeaker works.
Sound homework
Pupils conducted a sound experiment in a playground to investigate how walls cast sound shadows. They took sound level measurements at various points around the playground using a sound meter after making a standard sound. The measurements showed lower sound levels in positions located behind walls and structures relative to the sound source, demonstrating the shadowing effect of walls on sound propagation.
May the forces be with you
This document discusses forces, mass, and acceleration. It provides examples of calculating acceleration using the equation F=ma. It includes sample problems such as determining the force needed to accelerate a space shuttle or the acceleration of a cyclist pedaling with a given force. Practice problems are provided for students to calculate acceleration, force, or mass given two of the three variables.
Forces making a force meter
A force meter measures force in Newtons. It works by using a rubber band of known length that stretches when a force is applied. The amount the rubber band stretches corresponds to the amount of force applied, allowing the force to be measured in Newtons on a scale.
6.3 food glorious food
Food contains chemical energy that originally comes from the Sun. The amount of energy a person needs each day can vary depending on factors like their body size, age, gender, activity levels, and environmental conditions like temperature. While two people may consume the same amount of energy, one may still gain weight due to differences in their metabolism or physical activity levels.
Assignment 6.1
This document contains instructions and questions for Assignment 6.1. Students are instructed to show all working and include relevant units. The questions involve calculating quantities using given values and units, including multiplying and dividing measurements in m, m3, ml, and kg/m3. Conversions between standard and scientific notation are also required.
Assignment 6.2
This document contains a possible table of results that shows temperature readings in degrees Celsius taken at 11:00, 12:00, 13:00 and 14:00 hours each day from Monday to Friday. The temperatures generally increase throughout the day, with the highest readings occurring between 13:00 and 14:00 hours each afternoon.
6.4 bending light
The document discusses the refraction of light and how it causes optical illusions. It explains that when light travels from one material to another of different density, it changes direction. Specifically, light bends toward the normal when moving to a denser material, and away from the normal when moving to a less dense material. The document provides instructions for an experiment to observe and measure the refraction of light through a glass block at different angles of incidence.
6.4 bending light
Light changes direction when moving between different materials due to refraction. An experiment is described where a glass block is used to refract light rays entering at various angles, and the angles are measured and graphed. The graph shows the relationship between the incident and refracted angles, with the refracted angle increasing as the incident angle increases. This property of refraction is important for applications like lenses and understanding optical illusions.
Assignment 6.1 answers
This document contains 6 math questions requiring calculations with units. Question 1 involves multiplying two lengths. Question 2 gives a length. Question 3 involves (a) multiplying three lengths and (b) multiplying the results of part a. Question 4 involves (a) converting ml to m3 and (b) writing the answer in scientific notation. Question 5 involves (a) calculating length and volume and (b) calculating density. Question 6 involves calculating volume and density. Full working and units are required for all answers.
6.4 bending light
1. Light changes direction when moving between different materials due to refraction. Scientists studying refracting telescopes need accurate information on how light refracts when moving between air and glass.
2. An experiment is described where light passes through a semicircular glass block and the angle of refraction is measured for different angles of incidence.
3. The results are plotted on a graph showing the relationship between incident and refracted angles, helping to understand how optics can correct vision problems.
5.8 current and pd in a circuit
The document discusses a circuit with two components in series, a resistor and a buzzer, that have different resistances. It asks what the potential difference (p.d.) is across each component and what this reveals about their relative resistances. It then provides learning objectives and example calculations for current, potential difference, and resistance in series circuits.
Speed and velocity
The document discusses key concepts related to speed, velocity, distance, and time. It provides definitions of speed, distance, displacement, velocity, and average and instantaneous speed. Examples are given to illustrate the difference between distance and displacement. Graphs showing variations in distance and velocity over time are presented, and the relationships between distance, time, speed, velocity, and their equations are summarized in a table.
Document in windows internet explorer
The document describes an experiment to determine the laws of reflection. [1] Students are instructed to use a mirror, light source, and protractor to measure the angle of incidence and reflection of light rays. [2] They will shine light at a mirror from various angles and measure the corresponding reflected angles to see if the angle of reflection equals the angle of incidence. [3] By plotting their results on a graph, students can evaluate whether the evidence supports the statement that the angle of reflection equals the angle of incidence.
6.3 giant mirror
A village in Italy installed a large mirror on a mountain opposite their village to direct sunlight into the village. The mirror helped brighten the village by reflecting sunlight into the dark areas between the mountains. Villagers could now grow crops that previously did not receive enough sunlight. The mirror demonstrated how reflected light can help illuminate dark spaces.
6.2 energy everywhere
This document discusses different types of energy, including potential energy which is stored or hidden energy that has the ability to do work, and kinetic energy which is energy of motion. It lists learning objectives about forms of energy and energy transfers. The rest of the document appears to contain questions at different levels about energy, asking about heat energy, potential vs kinetic energy, energy transfers, examples of potential energy storage, and drawing energy transfer diagrams.
Mark scheme
This document is a coursework assessment form for a GCE Advanced Subsidiary physics course. It provides criteria for evaluating student coursework in 5 areas: [1] the quality and independence of the student's research briefing, [2] the use and understanding of physics demonstrated, and [3] the selection, summarizing, explanation, and [4] understanding/critical thinking shown in the student's work. Scores from 1-5 are given for each criterion, with 5 being the highest score. The form also includes the student's name and ID number for record keeping purposes.
More from mrrayner (20)
5.5 ohms law
- 1. 1 February 2011 5.5 Ohm’s Law Copy down this table please
- 2. Learning objectives Investigate the relationship between V, I and R Show that I = V/R and plot I against V Practise using I = V/R
- 7. Ohm’s Law Voltage Resistance Current
- 8. V I R
- 9. Worked example 1 A circuit has a voltage of 12 V and a resistance of 100 Ω. What is the current going around the circuit?
- 10. Worked example 1 A circuit has a voltage of 12 V and a resistance of 100 ohms. What is the current going around the circuit?
- 11. Question 1 What is the current in the circuit? 6 V 200 Ω
- 12. Question 2 What is the value of the resistor in this circuit? 3 V 150 mA
- 13. Question 3 What is the electromotive force from the cell? 100 mA 500 Ω
- 14. Ohm’s law The current through a conductor is proportional to the voltage across it – provided the temperature remains constant An electric current causes heating which makes things complicated