Electricity
•Download as PPT, PDF•
1 like•271 views
Electricity can flow through circuits due to electric current, which is the flow of positive charges opposite to electrons. Voltage causes current to flow and is measured in volts, while resistance from atoms impedes current flow and is measured in ohms. Ohm's law states that voltage equals current times resistance.
Report
Share
Report
Share
Recommended
resistance [Ohm's law]
Ohm's law defines the relationship between voltage (V), current (I), and resistance (R) in circuits. V=IR, where V is measured in volts, I in amps, and R in ohms. Resistivity is a measure of how strongly a material opposes the flow of electric current and is represented by the Greek letter rho. It depends on the material's properties but not the size or shape of the object. In series circuits, the current is the same in each component and the total voltage is the sum of the individual voltages. In parallel circuits, the voltage is the same across each branch while the total current is the sum of the branch currents.
Electricity
This document discusses electricity, circuits, Ohm's Law, and series and parallel circuits. It defines key terms like resistance (R), current (I), and voltage (V) and explains how they relate according to Ohm's Law (I=V/R). It discusses how total resistance, current, and voltage are calculated for series and parallel circuits. Key facts about resistivity and how it affects resistance are also summarized. Diagrams and examples are provided to illustrate these circuit concepts.
Current & Ohms Law 03 2000
This document provides an overview of basic electricity concepts including current, Ohm's law, and circuit components. It defines current as the rate of electron flow measured in amperes. Ohm's law states that current is directly proportional to voltage and inversely proportional to resistance. The document explains how Ohm's law can be used to calculate any of the variables in a circuit if two are known. Circuit diagrams and the water analogy are used to illustrate these concepts.
Ohm's Law
The document discusses Ohm's Law, which states that the current (I) in a circuit is directly proportional to the voltage (V) across the circuit and inversely proportional to the resistance (R) of the circuit. It then defines some key electrical terms: voltage is potential difference, current is electron flow rate, and resistance is the opposition to electron flow. It also describes some common electrical components like cells, switches, resistors, capacitors, diodes, and LEDs.
Ohms law
This document provides an overview of a course on basic electricity and Ohm's Law. The course covers topics such as atomic structure, electric charges, definitions of power, voltage, current and resistance. It examines units of measurement, proper methods for checking voltage and current, and circuit types including series, parallel and combination circuits. The textbook for the course is listed.
Ohm’s law
This presentation provides an overview of Ohm's Law, which describes the relationship between voltage, current, and resistance in electrical circuits. It defines each variable, explains their units of measurement, and how they relate to one another. The objectives are for students to understand the variables, their relationships, and how to use the formula to compute a missing value. Examples are provided to demonstrate solving for voltage, current, and resistance.
Ohm’s law
Georg Simon Ohm was a German physicist born in 1789 who discovered Ohm's Law, which states that the current through a conductor is directly proportional to the voltage applied and inversely proportional to the resistance of the conductor. Ohm spent nine years studying electric circuits experimentally and took great care to ensure accuracy in his experiments. In 1827, he was able to show from his experiments the simple mathematical relationship between resistance, current, and voltage that became known as Ohm's Law. Ohm's Law can be expressed as V=IR, where V is voltage, I is current, and R is resistance.
Ohms law added by arvi
Ohm's Law explains the relationship between voltage, current, and resistance in a circuit, where voltage equals current times resistance. It is commonly used by electricians and automotive technicians to understand how changes to one factor affect the other two. The law only applies when the conductor's resistance remains constant and does not follow Ohm's law when the material is non-ohmic.
Recommended
resistance [Ohm's law]
Ohm's law defines the relationship between voltage (V), current (I), and resistance (R) in circuits. V=IR, where V is measured in volts, I in amps, and R in ohms. Resistivity is a measure of how strongly a material opposes the flow of electric current and is represented by the Greek letter rho. It depends on the material's properties but not the size or shape of the object. In series circuits, the current is the same in each component and the total voltage is the sum of the individual voltages. In parallel circuits, the voltage is the same across each branch while the total current is the sum of the branch currents.
Electricity
This document discusses electricity, circuits, Ohm's Law, and series and parallel circuits. It defines key terms like resistance (R), current (I), and voltage (V) and explains how they relate according to Ohm's Law (I=V/R). It discusses how total resistance, current, and voltage are calculated for series and parallel circuits. Key facts about resistivity and how it affects resistance are also summarized. Diagrams and examples are provided to illustrate these circuit concepts.
Current & Ohms Law 03 2000
This document provides an overview of basic electricity concepts including current, Ohm's law, and circuit components. It defines current as the rate of electron flow measured in amperes. Ohm's law states that current is directly proportional to voltage and inversely proportional to resistance. The document explains how Ohm's law can be used to calculate any of the variables in a circuit if two are known. Circuit diagrams and the water analogy are used to illustrate these concepts.
Ohm's Law
The document discusses Ohm's Law, which states that the current (I) in a circuit is directly proportional to the voltage (V) across the circuit and inversely proportional to the resistance (R) of the circuit. It then defines some key electrical terms: voltage is potential difference, current is electron flow rate, and resistance is the opposition to electron flow. It also describes some common electrical components like cells, switches, resistors, capacitors, diodes, and LEDs.
Ohms law
This document provides an overview of a course on basic electricity and Ohm's Law. The course covers topics such as atomic structure, electric charges, definitions of power, voltage, current and resistance. It examines units of measurement, proper methods for checking voltage and current, and circuit types including series, parallel and combination circuits. The textbook for the course is listed.
Ohm’s law
This presentation provides an overview of Ohm's Law, which describes the relationship between voltage, current, and resistance in electrical circuits. It defines each variable, explains their units of measurement, and how they relate to one another. The objectives are for students to understand the variables, their relationships, and how to use the formula to compute a missing value. Examples are provided to demonstrate solving for voltage, current, and resistance.
Ohm’s law
Georg Simon Ohm was a German physicist born in 1789 who discovered Ohm's Law, which states that the current through a conductor is directly proportional to the voltage applied and inversely proportional to the resistance of the conductor. Ohm spent nine years studying electric circuits experimentally and took great care to ensure accuracy in his experiments. In 1827, he was able to show from his experiments the simple mathematical relationship between resistance, current, and voltage that became known as Ohm's Law. Ohm's Law can be expressed as V=IR, where V is voltage, I is current, and R is resistance.
Ohms law added by arvi
Ohm's Law explains the relationship between voltage, current, and resistance in a circuit, where voltage equals current times resistance. It is commonly used by electricians and automotive technicians to understand how changes to one factor affect the other two. The law only applies when the conductor's resistance remains constant and does not follow Ohm's law when the material is non-ohmic.
Physics: Electricity
Electricity is defined. Electric current is the movement of charged particles in a specific direction. Current, charge, and time are related by the equation current = charge / time. Voltage is known as electromotive force or potential difference and is the electric pressure that causes current to flow. Voltage, charge, and energy are related by the equation voltage = energy / charge. Resistance is the opposition a material offers to current. Ohm's Law states that current is directly proportional to voltage and inversely proportional to resistance, represented by the equation I=V/R. Sample problems demonstrate calculating current, voltage, and resistance using Ohm's Law.
Unit c electrical principals & technologies notes(ohms law)
Ohm's Law states that the current through a conductor is directly proportional to the voltage applied, provided the resistance remains constant. Georg Simon Ohm discovered this relationship in the 1800s and developed a mathematical formula relating voltage (V), current (I), and resistance (R) such that V=I×R. Various devices can measure these electrical properties, and changing the temperature of a resistor alters its resistance and causes Ohm's Law to break down.
Wiring Part 4 : ohms law
This PowerPoint gives the information about Ohms law also explains different terms related to Ohms law ….
Ohm's law
Ohm's law describes the relationship between voltage, current, and resistance in an electrical circuit. It states that the current through a conductor between two points is directly proportional to the voltage across the two points, and inversely proportional to the resistance between them. Voltage is the "push" or pressure behind current flow, measured in volts. Current is the quantity of electrical flow through a circuit, measured in amps. Resistance opposes the flow of current and is measured in ohms. Ohm's law can be expressed as formulas to calculate voltage, current, or resistance when two of the three values are known.
Electricity- Class-X-CBSE
Electric current flows when charges move through a conducting material in a closed circuit. The document discusses key concepts related to electricity including:
- Electricity is a type of energy that can build up in one place or flow from one place to another as static or current electricity.
- An electric circuit allows current to flow when it provides a complete loop or path for charges to move through components like wires, batteries, and light bulbs.
- Key factors that control current in a circuit include resistance of the materials and voltage of the power source according to Ohm's law.
Ohms law
Ohm's law explains the relationship between voltage, current, and resistance in a circuit. Voltage is the pressure behind current flow, measured in volts. Current refers to the quantity of electrical flow, measured in amps. Resistance opposes current flow, measured in ohms. According to Ohm's law, if voltage is constant, increasing resistance decreases current, and decreasing resistance increases current.
ELECTRICITY CBSE CLASS 10
This video has notes of the chapter with a simple language ,if you want the explanation visit my you-tube channel "YASH YADAV".
Fairylights...Principles and Definition of Ohms Law
This document discusses Ohm's law and basic electrical circuit principles. It defines resistance, current, voltage, and other concepts. It explains that Ohm's law states that voltage is directly proportional to current. Kirchhoff's laws are also summarized, including that current is the same in series circuits and the total current into a parallel branch equals the total current out. Examples are provided of calculating resistance using Ohm's law and of the effects of adding components like cells or lamps to series and parallel circuits.
Electricity ppt for class 10
1. The document discusses electricity and various electrical concepts like charge, current, voltage, resistance, and circuits. It defines these terms and explains properties and relationships between concepts.
2. Key points covered include that electricity is the flow of electrons in a circuit, current is the rate of flow of charge, and Ohm's Law defines the relationship between current, voltage, and resistance.
3. The document also compares series and parallel circuits, explaining that series circuits have higher total resistance while parallel circuits have lower total resistance.
ppt Ohm's law
1) Ohm's Law states that the current through a conductor is directly proportional to the voltage applied across it. It is represented by the equation V=IR, where V is the voltage, I is the current, and R is the resistance.
2) In a series circuit, the current is the same through all components as there is only one path for current to flow. The total resistance is the sum of the individual resistances.
3) In a parallel circuit, the voltage is the same across all branches as there are multiple paths for current to flow forming closed loops. The total resistance is lower than any single resistance.
Electricity Class 10 Physics Chapter Complete with Formulae
Electricity is the flow of electrons through a closed circuit. It was discovered by William Gilbert and consists of electrons in motion. Conductors allow the flow of electricity through the presence of free electrons between atoms. Insulators do not allow electricity to flow as they lack free electrons. Electric charge, current, potential difference, and other concepts are explained along with circuits, Ohm's law, and electrical power calculations. Key formulas and relationships are defined for voltage, current, resistance, energy, and power.
Basic Information of Ohm's law
Ohm's law defines the relationship between voltage, current, and resistance in electrical circuits. It states that if voltage is applied to a resistance, current will flow and power will be consumed. The law establishes that voltage is measured in volts, current in amps, and resistance in ohms. Using Ohm's law, electricians can calculate any two of these values if the third is known. Understanding Ohm's law is essential for designing and troubleshooting electrical and electronic circuits.
Chapter 14 - Ohm's Law
This is a PowerPoint presentation whose contents are obtained from Earl D. Gates Introduction to Basic Electricity and Electronics. No Copyright Rules Intended to Be Violated. Only the manner of presentation is deemed original. Details about Ohm and Kirchhoff were obtained from Wikipedia.
Ohm's law
This document provides an overview of direct current circuits and related concepts. It discusses the structure of atoms and how they can gain or lose electrons. It also describes the three main types of materials based on their ability to conduct electricity: conductors, semiconductors, and insulators. Additionally, the document defines key terms like voltage, electrostatic charge, and methods for producing voltage such as friction, pressure, and heat. Safety precautions for working with direct current circuits are also mentioned.
Current Electricity & Ohms Law
Discusses Ohm's Law and current electricity and related to energy transfer in circuits.
**More good stuff available at:
www.wsautter.com
and
http://www.youtube.com/results?search_query=wnsautter&aq=f
Ohm's law
Ohm's law, discovered by German physicist Georg Simon Ohm in 1827, states that the current through a conductor is directly proportional to the voltage applied, provided the physical conditions of the conductor remain unchanged. It explains the relationship between voltage, current, and resistance, and is used by electricians, automotive technicians, and stereo installers. The law is represented by the equation V=I*R, where V is voltage, I is current, and R is resistance.
Chapter 12 Electricity class 10 ncert
This document discusses several key concepts related to electric circuits:
1. It defines electric current as the flow of electrons through a conductor caused by a cell or battery. Current is measured in amperes and flows from the positive terminal to the negative terminal.
2. It explains that electric current only flows when there is a potential difference or voltage between two points in a circuit provided by a cell or battery. Voltage is measured in volts.
3. It states Ohm's law, which establishes the direct relationship between current and voltage in a circuit: the current is directly proportional to the voltage when resistance remains constant.
Ohm's law Presentation(gub abu bakar siddik )
Ohm's law states that the current through a conductor is directly proportional to the voltage applied. The document describes an experiment to demonstrate Ohm's law using a circuit with a fixed resistor. Voltage is varied using a DC power supply while current is measured with an ammeter. Measurements of voltage and current are recorded and their ratio is calculated and found to be approximately constant, demonstrating Ohm's law. A graph of voltage versus current shows a linear relationship, further confirming Ohm's law.
Basic science
1) The presentation covers basic electrical concepts including voltage, current, resistance and Ohm's law.
2) It defines voltage, current and resistance, explaining that voltage is potential difference, current is the flow of electric charge, and resistance is a measure of how much a material opposes the flow of electric current.
3) Ohm's law is described as relating voltage, current, and resistance in a circuit, such that voltage equals current times resistance.
Ohm's Law
1. Ohm's law defines the linear relationship between voltage and current in a circuit, where the resistor's resistance and voltage drop determine the current flow through the resistor.
2. The resistor's current is equal to the voltage divided by the resistance according to the equation I=V/R, where I is current, V is voltage, and R is resistance.
3. Ohm's law can also be used to calculate voltage or resistance when two variables are known, as shown in the equations V=IR and R=V/I.
The History of Stoke Newington Street Names
Presented at the Stoke Newington Literary Festival on 9th June 2024
www.StokeNewingtonHistory.com
More Related Content
What's hot
Physics: Electricity
Electricity is defined. Electric current is the movement of charged particles in a specific direction. Current, charge, and time are related by the equation current = charge / time. Voltage is known as electromotive force or potential difference and is the electric pressure that causes current to flow. Voltage, charge, and energy are related by the equation voltage = energy / charge. Resistance is the opposition a material offers to current. Ohm's Law states that current is directly proportional to voltage and inversely proportional to resistance, represented by the equation I=V/R. Sample problems demonstrate calculating current, voltage, and resistance using Ohm's Law.
Unit c electrical principals & technologies notes(ohms law)
Ohm's Law states that the current through a conductor is directly proportional to the voltage applied, provided the resistance remains constant. Georg Simon Ohm discovered this relationship in the 1800s and developed a mathematical formula relating voltage (V), current (I), and resistance (R) such that V=I×R. Various devices can measure these electrical properties, and changing the temperature of a resistor alters its resistance and causes Ohm's Law to break down.
Wiring Part 4 : ohms law
This PowerPoint gives the information about Ohms law also explains different terms related to Ohms law ….
Ohm's law
Ohm's law describes the relationship between voltage, current, and resistance in an electrical circuit. It states that the current through a conductor between two points is directly proportional to the voltage across the two points, and inversely proportional to the resistance between them. Voltage is the "push" or pressure behind current flow, measured in volts. Current is the quantity of electrical flow through a circuit, measured in amps. Resistance opposes the flow of current and is measured in ohms. Ohm's law can be expressed as formulas to calculate voltage, current, or resistance when two of the three values are known.
Electricity- Class-X-CBSE
Electric current flows when charges move through a conducting material in a closed circuit. The document discusses key concepts related to electricity including:
- Electricity is a type of energy that can build up in one place or flow from one place to another as static or current electricity.
- An electric circuit allows current to flow when it provides a complete loop or path for charges to move through components like wires, batteries, and light bulbs.
- Key factors that control current in a circuit include resistance of the materials and voltage of the power source according to Ohm's law.
Ohms law
Ohm's law explains the relationship between voltage, current, and resistance in a circuit. Voltage is the pressure behind current flow, measured in volts. Current refers to the quantity of electrical flow, measured in amps. Resistance opposes current flow, measured in ohms. According to Ohm's law, if voltage is constant, increasing resistance decreases current, and decreasing resistance increases current.
ELECTRICITY CBSE CLASS 10
This video has notes of the chapter with a simple language ,if you want the explanation visit my you-tube channel "YASH YADAV".
Fairylights...Principles and Definition of Ohms Law
This document discusses Ohm's law and basic electrical circuit principles. It defines resistance, current, voltage, and other concepts. It explains that Ohm's law states that voltage is directly proportional to current. Kirchhoff's laws are also summarized, including that current is the same in series circuits and the total current into a parallel branch equals the total current out. Examples are provided of calculating resistance using Ohm's law and of the effects of adding components like cells or lamps to series and parallel circuits.
Electricity ppt for class 10
1. The document discusses electricity and various electrical concepts like charge, current, voltage, resistance, and circuits. It defines these terms and explains properties and relationships between concepts.
2. Key points covered include that electricity is the flow of electrons in a circuit, current is the rate of flow of charge, and Ohm's Law defines the relationship between current, voltage, and resistance.
3. The document also compares series and parallel circuits, explaining that series circuits have higher total resistance while parallel circuits have lower total resistance.
ppt Ohm's law
1) Ohm's Law states that the current through a conductor is directly proportional to the voltage applied across it. It is represented by the equation V=IR, where V is the voltage, I is the current, and R is the resistance.
2) In a series circuit, the current is the same through all components as there is only one path for current to flow. The total resistance is the sum of the individual resistances.
3) In a parallel circuit, the voltage is the same across all branches as there are multiple paths for current to flow forming closed loops. The total resistance is lower than any single resistance.
Electricity Class 10 Physics Chapter Complete with Formulae
Electricity is the flow of electrons through a closed circuit. It was discovered by William Gilbert and consists of electrons in motion. Conductors allow the flow of electricity through the presence of free electrons between atoms. Insulators do not allow electricity to flow as they lack free electrons. Electric charge, current, potential difference, and other concepts are explained along with circuits, Ohm's law, and electrical power calculations. Key formulas and relationships are defined for voltage, current, resistance, energy, and power.
Basic Information of Ohm's law
Ohm's law defines the relationship between voltage, current, and resistance in electrical circuits. It states that if voltage is applied to a resistance, current will flow and power will be consumed. The law establishes that voltage is measured in volts, current in amps, and resistance in ohms. Using Ohm's law, electricians can calculate any two of these values if the third is known. Understanding Ohm's law is essential for designing and troubleshooting electrical and electronic circuits.
Chapter 14 - Ohm's Law
This is a PowerPoint presentation whose contents are obtained from Earl D. Gates Introduction to Basic Electricity and Electronics. No Copyright Rules Intended to Be Violated. Only the manner of presentation is deemed original. Details about Ohm and Kirchhoff were obtained from Wikipedia.
Ohm's law
This document provides an overview of direct current circuits and related concepts. It discusses the structure of atoms and how they can gain or lose electrons. It also describes the three main types of materials based on their ability to conduct electricity: conductors, semiconductors, and insulators. Additionally, the document defines key terms like voltage, electrostatic charge, and methods for producing voltage such as friction, pressure, and heat. Safety precautions for working with direct current circuits are also mentioned.
Current Electricity & Ohms Law
Discusses Ohm's Law and current electricity and related to energy transfer in circuits.
**More good stuff available at:
www.wsautter.com
and
http://www.youtube.com/results?search_query=wnsautter&aq=f
Ohm's law
Ohm's law, discovered by German physicist Georg Simon Ohm in 1827, states that the current through a conductor is directly proportional to the voltage applied, provided the physical conditions of the conductor remain unchanged. It explains the relationship between voltage, current, and resistance, and is used by electricians, automotive technicians, and stereo installers. The law is represented by the equation V=I*R, where V is voltage, I is current, and R is resistance.
Chapter 12 Electricity class 10 ncert
This document discusses several key concepts related to electric circuits:
1. It defines electric current as the flow of electrons through a conductor caused by a cell or battery. Current is measured in amperes and flows from the positive terminal to the negative terminal.
2. It explains that electric current only flows when there is a potential difference or voltage between two points in a circuit provided by a cell or battery. Voltage is measured in volts.
3. It states Ohm's law, which establishes the direct relationship between current and voltage in a circuit: the current is directly proportional to the voltage when resistance remains constant.
Ohm's law Presentation(gub abu bakar siddik )
Ohm's law states that the current through a conductor is directly proportional to the voltage applied. The document describes an experiment to demonstrate Ohm's law using a circuit with a fixed resistor. Voltage is varied using a DC power supply while current is measured with an ammeter. Measurements of voltage and current are recorded and their ratio is calculated and found to be approximately constant, demonstrating Ohm's law. A graph of voltage versus current shows a linear relationship, further confirming Ohm's law.
Basic science
1) The presentation covers basic electrical concepts including voltage, current, resistance and Ohm's law.
2) It defines voltage, current and resistance, explaining that voltage is potential difference, current is the flow of electric charge, and resistance is a measure of how much a material opposes the flow of electric current.
3) Ohm's law is described as relating voltage, current, and resistance in a circuit, such that voltage equals current times resistance.
Ohm's Law
1. Ohm's law defines the linear relationship between voltage and current in a circuit, where the resistor's resistance and voltage drop determine the current flow through the resistor.
2. The resistor's current is equal to the voltage divided by the resistance according to the equation I=V/R, where I is current, V is voltage, and R is resistance.
3. Ohm's law can also be used to calculate voltage or resistance when two variables are known, as shown in the equations V=IR and R=V/I.
What's hot (20)
Unit c electrical principals & technologies notes(ohms law)
Unit c electrical principals & technologies notes(ohms law)
Fairylights...Principles and Definition of Ohms Law
Fairylights...Principles and Definition of Ohms Law
Electricity Class 10 Physics Chapter Complete with Formulae
Electricity Class 10 Physics Chapter Complete with Formulae
Recently uploaded
The History of Stoke Newington Street Names
Presented at the Stoke Newington Literary Festival on 9th June 2024
www.StokeNewingtonHistory.com
How to Manage Your Lost Opportunities in Odoo 17 CRM
Odoo 17 CRM allows us to track why we lose sales opportunities with "Lost Reasons." This helps analyze our sales process and identify areas for improvement. Here's how to configure lost reasons in Odoo 17 CRM
The simplified electron and muon model, Oscillating Spacetime: The Foundation...
Discover the Simplified Electron and Muon Model: A New Wave-Based Approach to Understanding Particles delves into a groundbreaking theory that presents electrons and muons as rotating soliton waves within oscillating spacetime. Geared towards students, researchers, and science buffs, this book breaks down complex ideas into simple explanations. It covers topics such as electron waves, temporal dynamics, and the implications of this model on particle physics. With clear illustrations and easy-to-follow explanations, readers will gain a new outlook on the universe's fundamental nature.
Azure Interview Questions and Answers PDF By ScholarHat
Azure Interview Questions and Answers PDF By ScholarHat
Main Java[All of the Base Concepts}.docx
This is part 1 of my Java Learning Journey. This Contains Custom methods, classes, constructors, packages, multithreading , try- catch block, finally block and more.
Digital Artifact 1 - 10VCD Environments Unit
Digital Artifact 1 - 10VCD Environments Unit - NGV Pavilion Concept Design
Advanced Java[Extra Concepts, Not Difficult].docx
This is part 2 of my Java Learning Journey. This contains Hashing, ArrayList, LinkedList, Date and Time Classes, Calendar Class and more.
Hindi varnamala | hindi alphabet PPT.pdf
हिंदी वर्णमाला पीपीटी, hindi alphabet PPT presentation, hindi varnamala PPT, Hindi Varnamala pdf, हिंदी स्वर, हिंदी व्यंजन, sikhiye hindi varnmala, dr. mulla adam ali, hindi language and literature, hindi alphabet with drawing, hindi alphabet pdf, hindi varnamala for childrens, hindi language, hindi varnamala practice for kids, https://www.drmullaadamali.com
How to Fix the Import Error in the Odoo 17
An import error occurs when a program fails to import a module or library, disrupting its execution. In languages like Python, this issue arises when the specified module cannot be found or accessed, hindering the program's functionality. Resolving import errors is crucial for maintaining smooth software operation and uninterrupted development processes.
Community pharmacy- Social and preventive pharmacy UNIT 5
Covered community pharmacy topic of the subject Social and preventive pharmacy for Diploma and Bachelor of pharmacy
Natural birth techniques - Mrs.Akanksha Trivedi Rama University
Natural birth techniques - Mrs.Akanksha Trivedi Rama UniversityAkanksha trivedi rama nursing college kanpur.
Natural birth techniques are various type such as/ water birth , alexender method, hypnosis, bradley method, lamaze method etcChapter 4 - Islamic Financial Institutions in Malaysia.pptx
Chapter 4 - Islamic Financial Institutions in Malaysia.pptxMohd Adib Abd Muin, Senior Lecturer at Universiti Utara Malaysia
This slide is special for master students (MIBS & MIFB) in UUM. Also useful for readers who are interested in the topic of contemporary Islamic banking.
How to Build a Module in Odoo 17 Using the Scaffold Method
Odoo provides an option for creating a module by using a single line command. By using this command the user can make a whole structure of a module. It is very easy for a beginner to make a module. There is no need to make each file manually. This slide will show how to create a module using the scaffold method.
How to Make a Field Mandatory in Odoo 17
In Odoo, making a field required can be done through both Python code and XML views. When you set the required attribute to True in Python code, it makes the field required across all views where it's used. Conversely, when you set the required attribute in XML views, it makes the field required only in the context of that particular view.
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Aberdeen
How to Setup Warehouse & Location in Odoo 17 Inventory
In this slide, we'll explore how to set up warehouses and locations in Odoo 17 Inventory. This will help us manage our stock effectively, track inventory levels, and streamline warehouse operations.
Recently uploaded (20)
Pride Month Slides 2024 David Douglas School District
Pride Month Slides 2024 David Douglas School District
Liberal Approach to the Study of Indian Politics.pdf
Liberal Approach to the Study of Indian Politics.pdf
How to Manage Your Lost Opportunities in Odoo 17 CRM
How to Manage Your Lost Opportunities in Odoo 17 CRM
The simplified electron and muon model, Oscillating Spacetime: The Foundation...
The simplified electron and muon model, Oscillating Spacetime: The Foundation...
Azure Interview Questions and Answers PDF By ScholarHat
Azure Interview Questions and Answers PDF By ScholarHat
Community pharmacy- Social and preventive pharmacy UNIT 5
Community pharmacy- Social and preventive pharmacy UNIT 5
Natural birth techniques - Mrs.Akanksha Trivedi Rama University
Natural birth techniques - Mrs.Akanksha Trivedi Rama University
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
How to Build a Module in Odoo 17 Using the Scaffold Method
How to Build a Module in Odoo 17 Using the Scaffold Method
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
How to Setup Warehouse & Location in Odoo 17 Inventory
How to Setup Warehouse & Location in Odoo 17 Inventory
Electricity
- 1. Electricity • Electric Current • Electric Voltage • Resistance • Ohm’s Law
- 2. Electric Current • Current is the rate of flow of “positive charges”. • Its direction is opposite to the flow of electrons. • This is because electric current was discovered before the atomic model. • Current is denoted by I. Its SI unit is Ampere (A).
- 4. Voltage (V) Voltage can be see as the height difference. If there is a height differnce (Voltage). Electricity will flow. Voltage is denoted by V. SI unit of voltage is Volt (V)
- 5. Resistence When electrons flow in a wire they, hit other atoms and slow down. This provides a resistance to their flow. This resistance can be measured.
- 6. Ohm’s Law V = I*R