This document summarizes an article from the International Journal of Electronics and Communication Engineering & Technology. The article derives an exact upper bound on the bit error rate of the decode-and-forward cooperation protocol for wireless relay networks. The destination uses maximum a posteriori decoding to optimally estimate the data sent from the source. The complexity arises because the data received at the destination does not have equal a priori probabilities due to potential errors in the source-to-relay link. Numerical results show that the derived upper bound is very tight. The closed-form expression of the upper bound can be used to fully study and understand the diversity performance of the decode-and-forward protocol.
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
Automatic cluster formation and assigning address for wireless sensor netIAEME Publication
This document summarizes an approach for automatic cluster formation and address assignment in wireless sensor networks. It proposes using a two-level addressing scheme, with level-1 addresses uniquely identifying clusters or paths and level-2 addresses assigned within each cluster based on ZigBee addressing. The approach involves distributed cluster formation, construction of a logical tree of clusters, and recursive two-level address assignment following ZigBee addressing principles but separately within each cluster. This provides a lightweight addressing scheme that supports stateless routing while efficiently utilizing the address space.
Some Studies on Different Power Allocation Schemes of Superposition Modulationidescitation
Superposition Modulation/Mapping (SM) is a newly
evolving modulation technique in which the conversion from
binary digits to symbols is done by linear superposition of the
binary digits instead of bijective (one-to-one) mapping. Due
to linear superposition, the symbol distribution of the data
symbols thus formed are Gaussian shaped which is capacity
achieving without active signal shaping. In this paper, a detailed
study on SM has been presented with respect to its different
power allocation schemes namely Equal Power Allocation
(EPA), Unequal Power Allocation (UPA) and Grouped Power
Allocation (GPA). Also, it has been shown that SM is more
capacity achieving than the conventional modulation
technique such as Quadrature Amplitude Modulation (QAM)
Physical security with power beacon assisted in half-duplex relaying networks...TELKOMNIKA JOURNAL
In this research, we proposed and investigated physical security with power beacon assisted in half-duplex relaying networks over a Rayleigh fading channel. In this model, the source (S) node communicates with the destination (D) node via the helping of the intermediate relay (R) node. The D and R nodes harvest energy from the power beacon (PB) node in the presence of a passive eavesdropper (E) node. Then we derived the integral form of the system outage probability (OP) and closed form of the intercept probability (IP). The correctness of the analytical of the OP and IP is verified by the Monte Carlo simulation. The influence of the main system parameters on the OP and IP also is investigated. The research results indicated that the analytical results are the same as the simulation ones.
Multi carrier equalization by restoration of redundanc y (merry) for adaptive...IJNSA Journal
This paper proposes a new blind adaptive channel shortening approach for multi-carrier systems. The
performance of the discrete Fourier transform-DMT (DFT-DMT) system is investigated with the proposed
DST-DMT system over the standard carrier serving area (CSA) loop1. Enhanced bit rates demonstrated
and less complexity also involved by the simulation of the DST-DMT system.
The document is an abstract for a PhD thesis on cooperative communications over wireless relay channels. It discusses analyzing relay channels from an information-theoretic and communication-theoretic perspective, including single-input single-output and multiple-input multiple-output relay channels. For MIMO relay channels, it focuses on two-hop channels using orthogonal space-time block coding at the relay in Rayleigh fading. It derives approximations for error probability and outage probability for amplify-and-forward relaying, and expressions for ergodic and outage capacity.
This document proposes a physical-layer network coding (PNC) scheme to improve throughput in wireless networks. PNC takes advantage of the broadcast nature of wireless transmissions by allowing signals from multiple nodes to be combined at the physical layer through modulation and demodulation. It demonstrates PNC for a three-node wireless linear network. With PNC, the three nodes can exchange information in two time slots, improving throughput by 100% over traditional scheduling and 50% over straightforward network coding. PNC mapping provides a way to perform network coding operations on electromagnetic signals directly at the physical layer by mapping their combination to binary additions.
Hybrid protocol for wireless EH network over weibull fading channel: performa...IJECEIAES
In this paper, the hybrid TSR-PSR protocol for wireless energy harvesting (EH) relaying network over the Weibull fading channel is investigated. The system network is working in half-duplex (HD) mode. For evaluating the system performance, the closed-form and integral-form expressions of the outage probability (OP) are investigated and derived. After that, numerical results convinced that our derived analytical results are the same with the simulation results by using Monte Carlo simulation. This paper provides a novel recommendation for the wireless EH relaying network.
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
Automatic cluster formation and assigning address for wireless sensor netIAEME Publication
This document summarizes an approach for automatic cluster formation and address assignment in wireless sensor networks. It proposes using a two-level addressing scheme, with level-1 addresses uniquely identifying clusters or paths and level-2 addresses assigned within each cluster based on ZigBee addressing. The approach involves distributed cluster formation, construction of a logical tree of clusters, and recursive two-level address assignment following ZigBee addressing principles but separately within each cluster. This provides a lightweight addressing scheme that supports stateless routing while efficiently utilizing the address space.
Some Studies on Different Power Allocation Schemes of Superposition Modulationidescitation
Superposition Modulation/Mapping (SM) is a newly
evolving modulation technique in which the conversion from
binary digits to symbols is done by linear superposition of the
binary digits instead of bijective (one-to-one) mapping. Due
to linear superposition, the symbol distribution of the data
symbols thus formed are Gaussian shaped which is capacity
achieving without active signal shaping. In this paper, a detailed
study on SM has been presented with respect to its different
power allocation schemes namely Equal Power Allocation
(EPA), Unequal Power Allocation (UPA) and Grouped Power
Allocation (GPA). Also, it has been shown that SM is more
capacity achieving than the conventional modulation
technique such as Quadrature Amplitude Modulation (QAM)
Physical security with power beacon assisted in half-duplex relaying networks...TELKOMNIKA JOURNAL
In this research, we proposed and investigated physical security with power beacon assisted in half-duplex relaying networks over a Rayleigh fading channel. In this model, the source (S) node communicates with the destination (D) node via the helping of the intermediate relay (R) node. The D and R nodes harvest energy from the power beacon (PB) node in the presence of a passive eavesdropper (E) node. Then we derived the integral form of the system outage probability (OP) and closed form of the intercept probability (IP). The correctness of the analytical of the OP and IP is verified by the Monte Carlo simulation. The influence of the main system parameters on the OP and IP also is investigated. The research results indicated that the analytical results are the same as the simulation ones.
Multi carrier equalization by restoration of redundanc y (merry) for adaptive...IJNSA Journal
This paper proposes a new blind adaptive channel shortening approach for multi-carrier systems. The
performance of the discrete Fourier transform-DMT (DFT-DMT) system is investigated with the proposed
DST-DMT system over the standard carrier serving area (CSA) loop1. Enhanced bit rates demonstrated
and less complexity also involved by the simulation of the DST-DMT system.
The document is an abstract for a PhD thesis on cooperative communications over wireless relay channels. It discusses analyzing relay channels from an information-theoretic and communication-theoretic perspective, including single-input single-output and multiple-input multiple-output relay channels. For MIMO relay channels, it focuses on two-hop channels using orthogonal space-time block coding at the relay in Rayleigh fading. It derives approximations for error probability and outage probability for amplify-and-forward relaying, and expressions for ergodic and outage capacity.
This document proposes a physical-layer network coding (PNC) scheme to improve throughput in wireless networks. PNC takes advantage of the broadcast nature of wireless transmissions by allowing signals from multiple nodes to be combined at the physical layer through modulation and demodulation. It demonstrates PNC for a three-node wireless linear network. With PNC, the three nodes can exchange information in two time slots, improving throughput by 100% over traditional scheduling and 50% over straightforward network coding. PNC mapping provides a way to perform network coding operations on electromagnetic signals directly at the physical layer by mapping their combination to binary additions.
Hybrid protocol for wireless EH network over weibull fading channel: performa...IJECEIAES
In this paper, the hybrid TSR-PSR protocol for wireless energy harvesting (EH) relaying network over the Weibull fading channel is investigated. The system network is working in half-duplex (HD) mode. For evaluating the system performance, the closed-form and integral-form expressions of the outage probability (OP) are investigated and derived. After that, numerical results convinced that our derived analytical results are the same with the simulation results by using Monte Carlo simulation. This paper provides a novel recommendation for the wireless EH relaying network.
Evaluation of channel estimation combined with ICI self-cancellation scheme i...ijcsse
Orthogonal Frequency Division Multiplexing (OFDM) is a modulation scheme, which is used in several wireless systems for transferring data at high rate. The multi path fading channel and the frequency offset between the transmitted and received carrier frequencies introduce ICI (Inter Carrier Interference). ICI effects the OFDM symbols and degrades the system performance. This paper proposes a solution: combine channel estimation and ICI self-cancellation to combat against ICI in doubly selective fading channel. The simulation results show the effect of this solution
Multiple optimal path identification using ant colony optimisation in wireles...ijwmn
This document summarizes a research paper that proposes using an ant colony optimization (ACO) algorithm to identify multiple optimal paths for data transmission in wireless sensor networks (WSNs). The algorithm is base-station driven, meaning the base station computes the optimal paths using ACO and communicates them to the sensor nodes. This approach overcomes limitations of traditional ACO routing by reducing communication overhead and identifying multiple optimal paths rather than just one. Simulation results show the proposed ACO approach finds shorter optimal paths compared to traditional ACO routing in WSNs.
This document discusses bandwidth utilization techniques like multiplexing and spreading. It defines multiplexing as a set of techniques that allows the simultaneous transmission of multiple signals across a single data link. The document provides examples and explanations of different multiplexing techniques including frequency-division multiplexing, wavelength-division multiplexing, synchronous time-division multiplexing, and statistical time-division multiplexing. It also discusses how these techniques can be used to efficiently utilize available bandwidth.
Computer Communication Networks-Routing protocols 1Krishna Nanda
This document provides an overview of routing protocols in computer networks. It discusses:
1) The goal of routing is to deliver data packets from source to destination(s) using forwarding tables updated by routing protocols. Routing can be unicast (one-to-one) or multicast (one-to-many).
2) Common routing algorithms include distance-vector routing (Bellman-Ford algorithm) and link-state routing (Dijkstra's algorithm). Distance-vector routing uses distance vectors exchanged between neighbors to calculate least-cost paths.
3) Issues with distance-vector routing include slow convergence and counting to infinity when link costs increase.
An Enhanced Performance Pipelined Bus Invert Coding For Power Optimization Of...IRJET Journal
This document proposes an enhanced pipelined bus invert coding technique to optimize power consumption on data buses. The proposed technique reduces the number of transitions on the bus compared to existing methods like bus invert coding and shift invert coding. It modifies the bus invert coding method to maximize power reduction. The proposed circuit performs better in terms of delay, number of transitions, and hardware complexity. Experimental results show the proposed circuit has fewer transitions and is faster than previous versions. It was implemented using Verilog HDL on a Xilinx FPGA and demonstrated improved performance over prior techniques for reducing switching activity and power dissipation.
REDUCTION OF BUS TRANSITION FOR COMPRESSED CODE SYSTEMSVLSICS Design
Low power VLSI circuit design is one of the most important issues in present day technology. One of the ways of reducing power is to reduce the number of transitions on the bus. The main focus here is to present a method for reducing the power consumption of compressed-code systems by inverting the bits that are transmitted on the bus. Compression will generally increase bit-toggling, as it removes redundancies from the code transmitted on the bus. Arithmetic coding technique is used for compression /decompression and bit-toggling reduction is done by using shift invert coding technique. Therefore, there is also an additional challenge, to find the right balance between compression ratio and the bit-toggling reduction. This technique requires only 2 extra bits for the low Power coding, irrespective of the bit-width of the bus for compressed data.
1. The document describes techniques for implementing complex enumeration for multi-user MIMO vector precoding, including the Schnorr-Euchner enumeration algorithm, circular set enumeration, and neighbour expansion methods.
2. A "puzzle enumerator" technique is proposed that divides the complex plane into regions and locally enumerates nodes within each region to identify the most favorable nodes, without requiring distance computations.
3. The puzzle enumerator, circular set enumeration, and neighbour expansion techniques were implemented on an FPGA. The puzzle enumerator achieved the lowest latency and area occupation compared to other techniques since it does not require distance computations or sorting.
This document proposes a physical-layer network coding (PNC) scheme to improve capacity in wireless networks. PNC takes advantage of the broadcast nature of wireless transmissions by allowing signals from multiple nodes to be combined at the receiver using network coding principles. Specifically:
- PNC coordinates transmissions so that signals from different nodes arrive simultaneously at the relay node, where they are combined using modulation mapping that performs network coding operations in the physical layer.
- This allows the relay node to transmit a single coded signal, requiring fewer time slots than schemes that avoid or separate interfering signals.
- In a basic three-node example network, PNC allows information exchange between the two outer nodes in two time slots, compared
This document summarizes research on distributed path computation algorithms that aim to prevent routing loops. It introduces the Distributed Path Computation with Intermediate Variables (DIV) algorithm, which can operate with any routing algorithm to guarantee loop-freedom. DIV generalizes previous loop-free algorithms and provably outperforms them by reducing synchronous updates and helping maintain paths during network changes. The document also reviews link-state routing, distance-vector routing, and existing loop-prevention techniques like the Diffusing Update Algorithm and Loop Free Invariance algorithms.
Iterative network channel decoding with cooperative space-time transmissionijasuc
This document summarizes an iterative network-channel decoding scheme for cooperative space-time transmission with network coding. The scheme uses convolutional codes as network codes at the relay node and Reed-Solomon codes as channel codes at the user nodes. An iterative joint network-channel decoder exchanges soft information between convolutional code-based network decoder and Reed-Solomon code-based channel decoders. Extrinsic information transfer analysis is performed to investigate the convergence properties of the proposed iterative decoder.
Bounds on the Achievable Rates of Faded Dirty Paper Channel IJCNCJournal
Bounds on the achievable rate of a Gaussian channel in the case that the transmitter knows the
interference signal but not its fading coefficients are given. We generalize the analysis which were studied
in [1] and [4] so that their results are special cases of our analysis. We enforce our bounds by simulations
in which many numerical examples are drawn and investigated under different cases.
The document discusses various techniques for image compression including:
- Run-length coding which encodes repeating pixel values and their lengths.
- Difference coding which encodes the differences between pixel values.
- Block truncation coding which divides images into blocks and assigns codewords.
- Predictive coding which predicts pixel values from neighbors and encodes differences.
Reversible compression allows exact reconstruction while lossy compression sacrifices some information for higher compression but images remain visually similar. Combining techniques can achieve even higher compression ratios.
1. The document proposes a scheme called Superimposed Spatial Modulation (SSM) that allows for doubling of information conveyed in the spatial position of transmitting antennas.
2. SSM superimposes two independent spatial modulation systems on the same antenna array. Each system transmits different components of orthogonal symbols.
3. This approach increases spectral efficiency over conventional spatial modulation by doubling the size of the possible antenna constellations.
Data Compression - Text Compression - Run Length EncodingMANISH T I
Run-length encoding (RLE) replaces consecutive repeated characters in data with a single character and count. For example, "aaabbc" would compress to "3a2bc". RLE works best on data with many repetitive characters like spaces. It has limitations for natural language text which contains few repetitions longer than doubles. Variants include digram encoding which compresses common letter pairs, and differencing which encodes differences between successive values like temperatures instead of absolute values.
Analysis of Space Time Codes Using Modulation TechniquesIOSR Journals
Abstract: In this Paper, Analysis of channel codes for improving the data rate and reliability of communication over fading channels using multiple transmit antennas has been considered. The codes, namely ’Space Time Codes’ render full diversity and amend coding gain. Performance criteria for designing such codes, under this assumption that the fading is slow and nonselective frequency, is also analysed. Under this research, Study of Frame Error Rate(FER) and outage capacity is compared for different no. Of transmit and receive antennas as well as for different modulation techniques. According to theoretical results FER decreases with increasing SNR and No. Of receiving antennas. Numerical and practical result shows that FER decreases with increasing SNR and no. Of receiving antennas. Keywords: Space time Block Codes ,Space time trellis Codes,Frame Error Rate(FER),Outage capacity,Pairwise Error Probability
MMSE and ZF Analysis of Macrodiversity MIMO Systems and Wimax Networks over F...IJERA Editor
We consider the large scale MIMO systems in which the number of users are gradually increased at that time the receiving antennas performance also decreased gradually. In contrast, almost no analytical results are available for macro diversity systems where both the sources and receive antennas are widely separated. Here, receive antennas experience unequal average SNRs from a source and receiver antenna receives a different average SNR from each source. Although this is an extremely difficult problem,In this paper, we provide approximate distributions for the output SNR of a ZF receiver and the output signal to interference plus noise ratio (SINR) of an MMSE receiver. In addition, simple high SNR approximations are provided for the symbol error rate (SER) of both receivers assuming M-PSK or M-QAM modulations .For better performance of receivers we can also implement the MMSE and ZF analysis in Wimax networks.
Evaluation of STBC and Convolutional Code Performance for Wireless Communicat...theijes
Under rich dissipating environment, Multiple Input Multiple Output (MIMO) scheme have better performance in term of reliability and increasing the throughput. Space Time Block Code (STBC) can reduce the Bit Error Rate (BER) with suitable data rate. In order to raise the amount of throughput more, high modulation order is used but it degrade the performance. To address this problem, a Convolutional Code (CC) can be support such system with various code rate to deal with different circumstances. This research is proposed a system with serial concatenation of STBC and CC with various modulation levels. Such system is tested with Rayleigh flat and selective fading channel by Matlab package R2015b with a list of modulation order and changing the code of each STBC and CC. The results show that such system can cover a range of Signal to Noise Ratio (SNR) from 0 to 21 dB of SNR for selective fading channel and -2 to 19 dBfor flat fading channel for a targeted BER of 10-4 with a various modulation index and code rate which lead to a flexible system to change the throughput depending on user conditions.
PERFORMANCE EVALUATION OF BER FOR AWGN, AWGN MULTIPATH AND RAYLEIGH FADING CH...IJEEE
This document evaluates the performance of bit error rate (BER) for different digital modulation techniques over additive white Gaussian noise (AWGN), AWGN multipath, and Rayleigh fading channels. It presents simulation results comparing the BER of binary phase-shift keying (BPSK) and quadrature phase-shift keying (QPSK) modulation under varying signal-to-noise ratio (SNR) levels for AWGN and AWGN multipath channels, and under varying Doppler shift levels for Rayleigh fading channels. The results show that BPSK has better BER performance than QPSK, and that BER is lowest for AWGN channels and highest for Rayleigh fading channels.
Using the Channel State Information (CSI) at the transmitter is fundamental for the precoder
design in Multi-user Multiple Input Single Output (MU-MISO-OFDM) systems. In Frequency
Division Duplex (FDD) systems, CSI can be just available at the transmitter through a limited
feedback channel [1], where we assume that each user quantizes its channel direction with a
finite number of quantization bits. In this paper, we consider a scalar quantization (SQ) scheme
of the Channel Direction Information (CDI). Although vector quantization (VQ) schemes [2],
[3] still outperform this scalar scheme in terms of quantization error and Sum rate, the former
scheme suffers from an exponential search complexity and high storage requirements at the
receiver for high number of feedback bits.
This document analyzes site selection diversity transmission (SSDT) for 3GPP WCDMA forward link and compares it to hard handover (HHO) and soft handover (SHO). It finds that SSDT can provide performance gains over HHO and SHO, but these gains may be reduced by feedback bit errors. The performance of each method is modeled and analyzed mathematically to derive bit error probability expressions as a function of signal-to-noise ratio. Feedback bit errors are also accounted for in the SSDT analysis.
This document summarizes a research paper that reviews different methods for scene text detection and the challenges associated with it. The paper begins with an introduction that describes the overall process of automated scene text detection systems. It then provides a literature review of various text detection methods proposed in previous research, which can be categorized as connected component based methods or texture based methods. Some example methods are described. The paper discusses challenges in scene text detection, such as variable imaging conditions, complex backgrounds, and a wide range of text sizes and fonts. Finally, it discusses performance metrics like precision, recall, and f-measure that are used to evaluate scene text detection methods based on a standard dataset.
This document analyzes the feasibility of using insulated concrete forms (ICF) in hot and humid climates by comparing the thermal performance of an ICF building to a normal concrete building in Oman over three summer months. Data loggers recorded temperature and humidity inside and outside both buildings. Results showed the ICF building had lower indoor temperatures and humidity. Heat gain calculations also indicated less transmission through the ICF walls. Electricity bills revealed the ICF building consumed 20-40% less energy for cooling. Therefore, the study concludes ICF walls perform better than normal concrete in hot, humid climates and can lower energy use.
Evaluation of channel estimation combined with ICI self-cancellation scheme i...ijcsse
Orthogonal Frequency Division Multiplexing (OFDM) is a modulation scheme, which is used in several wireless systems for transferring data at high rate. The multi path fading channel and the frequency offset between the transmitted and received carrier frequencies introduce ICI (Inter Carrier Interference). ICI effects the OFDM symbols and degrades the system performance. This paper proposes a solution: combine channel estimation and ICI self-cancellation to combat against ICI in doubly selective fading channel. The simulation results show the effect of this solution
Multiple optimal path identification using ant colony optimisation in wireles...ijwmn
This document summarizes a research paper that proposes using an ant colony optimization (ACO) algorithm to identify multiple optimal paths for data transmission in wireless sensor networks (WSNs). The algorithm is base-station driven, meaning the base station computes the optimal paths using ACO and communicates them to the sensor nodes. This approach overcomes limitations of traditional ACO routing by reducing communication overhead and identifying multiple optimal paths rather than just one. Simulation results show the proposed ACO approach finds shorter optimal paths compared to traditional ACO routing in WSNs.
This document discusses bandwidth utilization techniques like multiplexing and spreading. It defines multiplexing as a set of techniques that allows the simultaneous transmission of multiple signals across a single data link. The document provides examples and explanations of different multiplexing techniques including frequency-division multiplexing, wavelength-division multiplexing, synchronous time-division multiplexing, and statistical time-division multiplexing. It also discusses how these techniques can be used to efficiently utilize available bandwidth.
Computer Communication Networks-Routing protocols 1Krishna Nanda
This document provides an overview of routing protocols in computer networks. It discusses:
1) The goal of routing is to deliver data packets from source to destination(s) using forwarding tables updated by routing protocols. Routing can be unicast (one-to-one) or multicast (one-to-many).
2) Common routing algorithms include distance-vector routing (Bellman-Ford algorithm) and link-state routing (Dijkstra's algorithm). Distance-vector routing uses distance vectors exchanged between neighbors to calculate least-cost paths.
3) Issues with distance-vector routing include slow convergence and counting to infinity when link costs increase.
An Enhanced Performance Pipelined Bus Invert Coding For Power Optimization Of...IRJET Journal
This document proposes an enhanced pipelined bus invert coding technique to optimize power consumption on data buses. The proposed technique reduces the number of transitions on the bus compared to existing methods like bus invert coding and shift invert coding. It modifies the bus invert coding method to maximize power reduction. The proposed circuit performs better in terms of delay, number of transitions, and hardware complexity. Experimental results show the proposed circuit has fewer transitions and is faster than previous versions. It was implemented using Verilog HDL on a Xilinx FPGA and demonstrated improved performance over prior techniques for reducing switching activity and power dissipation.
REDUCTION OF BUS TRANSITION FOR COMPRESSED CODE SYSTEMSVLSICS Design
Low power VLSI circuit design is one of the most important issues in present day technology. One of the ways of reducing power is to reduce the number of transitions on the bus. The main focus here is to present a method for reducing the power consumption of compressed-code systems by inverting the bits that are transmitted on the bus. Compression will generally increase bit-toggling, as it removes redundancies from the code transmitted on the bus. Arithmetic coding technique is used for compression /decompression and bit-toggling reduction is done by using shift invert coding technique. Therefore, there is also an additional challenge, to find the right balance between compression ratio and the bit-toggling reduction. This technique requires only 2 extra bits for the low Power coding, irrespective of the bit-width of the bus for compressed data.
1. The document describes techniques for implementing complex enumeration for multi-user MIMO vector precoding, including the Schnorr-Euchner enumeration algorithm, circular set enumeration, and neighbour expansion methods.
2. A "puzzle enumerator" technique is proposed that divides the complex plane into regions and locally enumerates nodes within each region to identify the most favorable nodes, without requiring distance computations.
3. The puzzle enumerator, circular set enumeration, and neighbour expansion techniques were implemented on an FPGA. The puzzle enumerator achieved the lowest latency and area occupation compared to other techniques since it does not require distance computations or sorting.
This document proposes a physical-layer network coding (PNC) scheme to improve capacity in wireless networks. PNC takes advantage of the broadcast nature of wireless transmissions by allowing signals from multiple nodes to be combined at the receiver using network coding principles. Specifically:
- PNC coordinates transmissions so that signals from different nodes arrive simultaneously at the relay node, where they are combined using modulation mapping that performs network coding operations in the physical layer.
- This allows the relay node to transmit a single coded signal, requiring fewer time slots than schemes that avoid or separate interfering signals.
- In a basic three-node example network, PNC allows information exchange between the two outer nodes in two time slots, compared
This document summarizes research on distributed path computation algorithms that aim to prevent routing loops. It introduces the Distributed Path Computation with Intermediate Variables (DIV) algorithm, which can operate with any routing algorithm to guarantee loop-freedom. DIV generalizes previous loop-free algorithms and provably outperforms them by reducing synchronous updates and helping maintain paths during network changes. The document also reviews link-state routing, distance-vector routing, and existing loop-prevention techniques like the Diffusing Update Algorithm and Loop Free Invariance algorithms.
Iterative network channel decoding with cooperative space-time transmissionijasuc
This document summarizes an iterative network-channel decoding scheme for cooperative space-time transmission with network coding. The scheme uses convolutional codes as network codes at the relay node and Reed-Solomon codes as channel codes at the user nodes. An iterative joint network-channel decoder exchanges soft information between convolutional code-based network decoder and Reed-Solomon code-based channel decoders. Extrinsic information transfer analysis is performed to investigate the convergence properties of the proposed iterative decoder.
Bounds on the Achievable Rates of Faded Dirty Paper Channel IJCNCJournal
Bounds on the achievable rate of a Gaussian channel in the case that the transmitter knows the
interference signal but not its fading coefficients are given. We generalize the analysis which were studied
in [1] and [4] so that their results are special cases of our analysis. We enforce our bounds by simulations
in which many numerical examples are drawn and investigated under different cases.
The document discusses various techniques for image compression including:
- Run-length coding which encodes repeating pixel values and their lengths.
- Difference coding which encodes the differences between pixel values.
- Block truncation coding which divides images into blocks and assigns codewords.
- Predictive coding which predicts pixel values from neighbors and encodes differences.
Reversible compression allows exact reconstruction while lossy compression sacrifices some information for higher compression but images remain visually similar. Combining techniques can achieve even higher compression ratios.
1. The document proposes a scheme called Superimposed Spatial Modulation (SSM) that allows for doubling of information conveyed in the spatial position of transmitting antennas.
2. SSM superimposes two independent spatial modulation systems on the same antenna array. Each system transmits different components of orthogonal symbols.
3. This approach increases spectral efficiency over conventional spatial modulation by doubling the size of the possible antenna constellations.
Data Compression - Text Compression - Run Length EncodingMANISH T I
Run-length encoding (RLE) replaces consecutive repeated characters in data with a single character and count. For example, "aaabbc" would compress to "3a2bc". RLE works best on data with many repetitive characters like spaces. It has limitations for natural language text which contains few repetitions longer than doubles. Variants include digram encoding which compresses common letter pairs, and differencing which encodes differences between successive values like temperatures instead of absolute values.
Analysis of Space Time Codes Using Modulation TechniquesIOSR Journals
Abstract: In this Paper, Analysis of channel codes for improving the data rate and reliability of communication over fading channels using multiple transmit antennas has been considered. The codes, namely ’Space Time Codes’ render full diversity and amend coding gain. Performance criteria for designing such codes, under this assumption that the fading is slow and nonselective frequency, is also analysed. Under this research, Study of Frame Error Rate(FER) and outage capacity is compared for different no. Of transmit and receive antennas as well as for different modulation techniques. According to theoretical results FER decreases with increasing SNR and No. Of receiving antennas. Numerical and practical result shows that FER decreases with increasing SNR and no. Of receiving antennas. Keywords: Space time Block Codes ,Space time trellis Codes,Frame Error Rate(FER),Outage capacity,Pairwise Error Probability
MMSE and ZF Analysis of Macrodiversity MIMO Systems and Wimax Networks over F...IJERA Editor
We consider the large scale MIMO systems in which the number of users are gradually increased at that time the receiving antennas performance also decreased gradually. In contrast, almost no analytical results are available for macro diversity systems where both the sources and receive antennas are widely separated. Here, receive antennas experience unequal average SNRs from a source and receiver antenna receives a different average SNR from each source. Although this is an extremely difficult problem,In this paper, we provide approximate distributions for the output SNR of a ZF receiver and the output signal to interference plus noise ratio (SINR) of an MMSE receiver. In addition, simple high SNR approximations are provided for the symbol error rate (SER) of both receivers assuming M-PSK or M-QAM modulations .For better performance of receivers we can also implement the MMSE and ZF analysis in Wimax networks.
Evaluation of STBC and Convolutional Code Performance for Wireless Communicat...theijes
Under rich dissipating environment, Multiple Input Multiple Output (MIMO) scheme have better performance in term of reliability and increasing the throughput. Space Time Block Code (STBC) can reduce the Bit Error Rate (BER) with suitable data rate. In order to raise the amount of throughput more, high modulation order is used but it degrade the performance. To address this problem, a Convolutional Code (CC) can be support such system with various code rate to deal with different circumstances. This research is proposed a system with serial concatenation of STBC and CC with various modulation levels. Such system is tested with Rayleigh flat and selective fading channel by Matlab package R2015b with a list of modulation order and changing the code of each STBC and CC. The results show that such system can cover a range of Signal to Noise Ratio (SNR) from 0 to 21 dB of SNR for selective fading channel and -2 to 19 dBfor flat fading channel for a targeted BER of 10-4 with a various modulation index and code rate which lead to a flexible system to change the throughput depending on user conditions.
PERFORMANCE EVALUATION OF BER FOR AWGN, AWGN MULTIPATH AND RAYLEIGH FADING CH...IJEEE
This document evaluates the performance of bit error rate (BER) for different digital modulation techniques over additive white Gaussian noise (AWGN), AWGN multipath, and Rayleigh fading channels. It presents simulation results comparing the BER of binary phase-shift keying (BPSK) and quadrature phase-shift keying (QPSK) modulation under varying signal-to-noise ratio (SNR) levels for AWGN and AWGN multipath channels, and under varying Doppler shift levels for Rayleigh fading channels. The results show that BPSK has better BER performance than QPSK, and that BER is lowest for AWGN channels and highest for Rayleigh fading channels.
Using the Channel State Information (CSI) at the transmitter is fundamental for the precoder
design in Multi-user Multiple Input Single Output (MU-MISO-OFDM) systems. In Frequency
Division Duplex (FDD) systems, CSI can be just available at the transmitter through a limited
feedback channel [1], where we assume that each user quantizes its channel direction with a
finite number of quantization bits. In this paper, we consider a scalar quantization (SQ) scheme
of the Channel Direction Information (CDI). Although vector quantization (VQ) schemes [2],
[3] still outperform this scalar scheme in terms of quantization error and Sum rate, the former
scheme suffers from an exponential search complexity and high storage requirements at the
receiver for high number of feedback bits.
This document analyzes site selection diversity transmission (SSDT) for 3GPP WCDMA forward link and compares it to hard handover (HHO) and soft handover (SHO). It finds that SSDT can provide performance gains over HHO and SHO, but these gains may be reduced by feedback bit errors. The performance of each method is modeled and analyzed mathematically to derive bit error probability expressions as a function of signal-to-noise ratio. Feedback bit errors are also accounted for in the SSDT analysis.
This document summarizes a research paper that reviews different methods for scene text detection and the challenges associated with it. The paper begins with an introduction that describes the overall process of automated scene text detection systems. It then provides a literature review of various text detection methods proposed in previous research, which can be categorized as connected component based methods or texture based methods. Some example methods are described. The paper discusses challenges in scene text detection, such as variable imaging conditions, complex backgrounds, and a wide range of text sizes and fonts. Finally, it discusses performance metrics like precision, recall, and f-measure that are used to evaluate scene text detection methods based on a standard dataset.
This document analyzes the feasibility of using insulated concrete forms (ICF) in hot and humid climates by comparing the thermal performance of an ICF building to a normal concrete building in Oman over three summer months. Data loggers recorded temperature and humidity inside and outside both buildings. Results showed the ICF building had lower indoor temperatures and humidity. Heat gain calculations also indicated less transmission through the ICF walls. Electricity bills revealed the ICF building consumed 20-40% less energy for cooling. Therefore, the study concludes ICF walls perform better than normal concrete in hot, humid climates and can lower energy use.
This document summarizes an article from the International Journal of Electronics and Communication Engineering & Technology. The article reviews methods for automatic license plate recognition (ALPR), which involves image acquisition, preprocessing, license plate detection, character segmentation, and character recognition. Common techniques discussed include binarization, connected component labeling, Hough transforms, neural networks, and support vector machines. The goal of the paper is to present a detailed review of the processes and methods used in ALPR systems.
This document summarizes research on photovoltaic structures using thermally evaporated tin sulfide thin films. Key points:
- Tin sulfide films were deposited by thermal evaporation onto glass substrates in thicknesses ranging from 100-300nm.
- The films exhibited n-type conductivity at low thicknesses, transitioning to p-type at higher thicknesses. Bandgaps ranged from 2.1-1.7eV.
- CdS/SnS photovoltaic cells showed open circuit voltages up to 400mV, short circuit current densities up to 0.061mA/cm2, and conversion efficiencies up to 1.49% under 106mW/cm2 illumination.
This document discusses converting sound energy into electricity using piezoelectric materials. It begins by introducing piezoelectricity and how certain materials can generate an electric charge when mechanically strained. It then proposes three methods for converting sound energy using piezoelectricity: 1) using a curtain and magnets to generate electricity from sound wave oscillations, 2) converting sound to heat then to electricity, and 3) using piezoelectric materials to directly convert the mechanical strain from sound waves into electric charges. The document concludes that sound contains large amounts of energy that can be harvested using these piezoelectric conversion methods.
This document summarizes an article from the International Journal of Computer Engineering and Technology (IJCET) that proposes a new protocol called MP-ECCNL to address coverage and connectivity issues in randomly deployed wireless sensor networks. The protocol aims to maximize network lifetime by optimizing routing through multi-hop transmissions while efficiently utilizing network resources. The article reviews related work on coverage and connectivity techniques, presents a problem formulation for modeling coverage and connectivity requirements, and describes how MP-ECCNL was tested against LEACH and found to better maintain coverage and connectivity over large-scale networks, extending lifetime.
This document summarizes a research paper that proposes developing a service mashup application for mobile users. It discusses how current mashup applications require significant processing power that mobile devices lack. The paper proposes a middleware platform that allows mobile users to define mashups, which are then executed on the middleware platform. It leverages various web APIs like Google Maps to develop a sample location-based service mashup app for Android. The app allows users to view their location on a map and add markers. The paper concludes the proposed platform demonstrates the feasibility of creating mashup applications for mobile through offloading processing to a middleware service.
Este documento proporciona una guía sobre el uso de Microsoft Word 2010. Explica los elementos básicos de la interfaz como los grupos de herramientas, pestañas e iconos. También describe cómo crear, guardar y formatear documentos, insertar imágenes y gráficos, revisar ortografía y gramática, e incluir ecuaciones matemáticas y secciones. El manual contiene instrucciones detalladas sobre las funciones y herramientas de Word para ayudar a los usuarios a aprovechar al máximo el programa.
Una red inalámbrica es una red que conecta nodos sin necesidad de cables, usando ondas electromagnéticas. Esto elimina los costos de cableado pero requiere una seguridad más robusta para evitar intrusos. Las redes inalámbricas usan puertos para transmitir y recibir señales de radio y son una de las tecnologías más prometedoras actualmente.
Este documento proporciona instrucciones sobre varias herramientas de filtrado y análisis de datos en Excel, incluidos filtros, formato condicional, tablas dinámicas y filtros avanzados. Explica cómo usar cada herramienta para organizar y resumir grandes conjuntos de datos de manera fácil y efectiva. También incluye enlaces a sitios web adicionales con información sobre estas funciones útiles de Excel.
O documento descreve a viagem de Cristóvão Colombo em 1492, onde ele parte de Espanha e descobre as Bahamas, Cuba e Hispaniola acreditando ter chegado à Ásia. Também fala sobre o Tratado de Tordesilhas de 1494, que dividiu as terras descobertas entre Portugal e Espanha ao longo de uma linha imaginária no oceano Atlântico.
INSTITUTO SOS RIOS DO BRASIL APRESENTA CURIOSIDADES:
UM HIPER NAVIO QUE TRANSPORTA 15 MIL CONTAINERS COM VELOCIDADE DE ATÉ 31 KNOTS.
VAI DA CHINA ATÉ A CALIFÓRNIA EM APENAS 4 DIAS.
REALMENTE, UM MONSTRO DOS MARES
The document discusses the results of a study on the impact of COVID-19 lockdowns on air pollution. The study found that lockdowns led to significant short-term reductions in nitrogen dioxide and fine particulate matter pollution globally as transportation and industrial activities declined substantially. However, the improvements in air quality were temporary and pollution levels rose back to pre-pandemic levels as restrictions eased and activity increased again.
El documento describe diferentes tipos de procesadores, incluyendo sus funciones, especificaciones y precios. Explica que el procesador (también conocido como CPU) es el componente principal de una computadora y es responsable de procesar y ejecutar instrucciones. Luego procede a detallar las características y especificaciones técnicas de procesadores Intel Core i3, i5, i7 y otros.
Grandes enchentes atingiram o estado de Santa Catarina entre 22 e 24 de novembro de 2008, deixando mais de 100 mortos e 140 mil desabrigados. Sete municípios decretaram estado de calamidade pública e dez estabelecimentos foram saqueados por moradores em busca de comida. As doações para as vítimas podem ser feitas em contas específicas de bancos ou entregues em empresas que estão arrecadando donativos.
Maravilhosas paisagens de reflexos em espelhos d' água, em diversos lugares do mundo, demonstrando assim uma beleza diferenciada...
Enviada pelo amigo EDMUNDO FERREIRA DA ROCHA do site Campos do Jordão Cultura.
An Energy-Efficient Dual Hop Cooperative Relay Model With Best Relay Selectioninventy
Research Inventy : International Journal of Engineering and Science is published by the group of young academic and industrial researchers with 12 Issues per year. It is an online as well as print version open access journal that provides rapid publication (monthly) of articles in all areas of the subject such as: civil, mechanical, chemical, electronic and computer engineering as well as production and information technology. The Journal welcomes the submission of manuscripts that meet the general criteria of significance and scientific excellence. Papers will be published by rapid process within 20 days after acceptance and peer review process takes only 7 days. All articles published in Research Inventy will be peer-reviewed.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Distributed differential beamforming and power allocation for cooperative com...IJECEIAES
Many coherent cooperative diversity techniques for wireless relay networks have recently been suggested to improve the overall system performance in terms of the achievable data rate or bit error rate (BER) with low decoding complexity and delay. However, these techniques require channel state information (CSI) at the transmitter side, at the receiver side, or at both sides. Therefore, due to the overhead associated with estimating CSI, distributed differential space-time coding techniques have been suggested to overcome this overhead by detecting the information symbols without requiring any (CSI) at any transmitting or receiving antenna. However, the latter techniques suffer from low performance in terms of BER as well as high latency and decoding complexity. In this paper, a distributed differential beamforming technique with power allocation is proposed to overcome all drawbacks associated with the later techniques without needing CSI at any antenna and to be used for cooperative communication networks. We prove through our simulation results which is based on error probability that the proposed technique outperforms the conventional technique with comparably low decoding complexity and latency.
Performance enhancement of audio transmission based on LMMSE methodnooriasukmaningtyas
The research in wireless communication has developed rapidly for the last
decades as a result of raising the demand for efficient data transmission with
more security and accuracy. This paper proposed a system based on the
special multiplexing (SM) technique and linear minimum mean square error
(LMMSE) detection method with the assistance of the hamming code as well
as the interleaving techniques for a better enhanced performance of an audio
transmission. Moreover, the comparison was done between the two systems
for different antenna configurations and with the presence of two types of
modulation: binary phase shift key and quateradure phase shift key. These
systems are employed by Matlab simulation to show significant results in
terms of enhancing the Rayleigh fading channel capacity, bit error rate
(BER) and security as well as in recovering the transmitting audio signals.
Each system has advantages than the others in one performance term respect
to the other terms. The simulation results have provided to prove and discuss
our analysis.
A low complexity distributed differential scheme based on orthogonal space t...IJECEIAES
The document presents a new low complexity distributed differential scheme for decode-and-forward wireless relay networks. The proposed scheme uses orthogonal space time block coding and does not require channel state information or differential encoding. It achieves high data rates with low decoding complexity at the source, relay, and destination nodes. Computer simulations show the proposed differential technique outperforms reference strategies and enjoys low encoding and decoding complexity while providing full transmission rate.
FPGA Design & Simulation Modeling of Baseband Data Transmission SystemIOSR Journals
This document describes the design, simulation, and modeling of a baseband data transmission system using FPGA and MATLAB. It presents the theoretical background of baseband signaling and matched filters. A system is implemented with an RC filter for pre-detection filtering to improve the bit error rate. The complete system is simulated in MATLAB and results are compared to theoretical predictions. The simulation agrees with theory and shows a 2.35 dB degradation when using an RC filter compared to an optimal matched filter. The combination of theoretical background, simulation, and experimental results helps strengthen student understanding.
In this paper, we analyzed a numerical evaluation of the performance of MIMO radio systems in the LTE network environment. Downlink physical layer of the OFDM-MIMO based radio interface is considered for system model and a theoretical analysis of the bit error rate of the two space-time codes (SFBC 2×1 and FSTD 4×2 codes are adopted by the LTE norm as a function of the signal to noise ratio. Analytical expressions are given for transmission over a Rayleigh channel without spatial correlation which is then compared with Monte-Carlo simulations. Further evaluated channel capacity and simulation results show throughput almost reaches to the capacity limit.
The document proposes a novel method to characterize nonlinear channels in OFDM systems using spectral notch signals. The method involves transmitting OFDM frames with and without spectral notches and analyzing the difference signal. This allows the estimation of frequency-domain Volterra kernels to be decomposed into independent subtasks involving fewer coefficients, improving accuracy and reducing complexity compared to conventional methods. Simulations validate that the proposed method has lower computational complexity than existing approaches for estimating kernels of cubically nonlinear channels in real baseband OFDM systems.
This document summarizes a research paper that proposes a new technique called Dummy Sequence Insertion (DSI) to reduce Peak-to-Average Power Ratio (PAPR) in OFDM systems. The technique inserts complementary dummy sequences into OFDM symbols to lower PAPR without transmitting side information. It partitions data subcarriers and adds Golay complementary sequences as dummy signals. The sequence is iteratively determined such that PAPR is reduced below a threshold. Simulation results show PAPR reduction of 5-6 dB with lower complexity than conventional Partial Transmit Sequence techniques since it requires fewer IFFT operations and no side information transmission. The technique simplifies power amplifier design while maintaining bandwidth efficiency.
International Journal of Engineering Research and Development (IJERD)IJERD Editor
journal publishing, how to publish research paper, Call For research paper, international journal, publishing a paper, IJERD, journal of science and technology, how to get a research paper published, publishing a paper, publishing of journal, publishing of research paper, reserach and review articles, IJERD Journal, How to publish your research paper, publish research paper, open access engineering journal, Engineering journal, Mathemetics journal, Physics journal, Chemistry journal, Computer Engineering, Computer Science journal, how to submit your paper, peer reviw journal, indexed journal, reserach and review articles, engineering journal, www.ijerd.com, research journals,
yahoo journals, bing journals, International Journal of Engineering Research and Development, google journals, hard copy of journal
Signal to-noise-ratio of signal acquisition in global navigation satellite sy...Alexander Decker
This document discusses signal-to-noise ratio (SNR) measurements for global navigation satellite systems. It presents formulas to calculate SNR and a new ratio called noise-to-signal ratio (NSR). The effects of bit error rate and bit time on SNR and NSR are studied. As bit error rate and bit time increase, SNR decreases while NSR increases, indicating lower signal quality. Graphs show the relationships between SNR and both bit error rate and bit time, as well as between NSR and the two factors. Improving SNR and reducing NSR is important for better signal acquisition quality.
Analysis on the performance of pointing error effects for RIS-aided FSO link ...TELKOMNIKA JOURNAL
In this study, we analysis on the performance of pointing error effects for reconfigurable intelligent surfeces (RISs) aided free-space optical (FSO) communication link over moderate to strong atmospheric turbulence channels. Among these solutions, RISs are considered as hardware technology to improve performance of optical wireless communication systems. Performance evaluation of systems is affected by atmospheric attenuation, pointing errors and moderate to strong atmospheric turbulence channels for quadrature amplitude modulation (QAM) technique. Atmospheric turbulence channel from moderate to strong is modeled using gamma-gamma distribution. Several numerical results obtained the average symbol error rate (ASER) performance versus beam waist radius and signal to noise ratio for three value of pointing error displacement standard deviation. From the results, it is show that with RIS assisted can effectively improve the performance and link distance of the wireless communication systems.
The typical three path propagation and anti jamming capability associated with DSSS were carried out
through the combination of Lab VIEW and MATLAB 7.8. At the transmitter, the NRZ data stream is first mapped
into BPSK symbols and then spread-out using different PN code like Hadamard code, Gold or Kasami sequences.
And we see that single user is not total utilization band. Direct Sequence Spread Spectrum (DSSS) techniques are
used same bandwidth Number of user to increase, and we see that better performance. That we can say Direct
Sequence Spread Spectrum techniques is reused to bandwidth. And we can say that in this techniques power loss is
low, anti jamming capability is less and system is more reliable. Furthermore, BPSK-Spreading transceiver should be
analyzed for their performance, multipath scenario and interference whether under AWGN channel which show that
these has been overcome effectively and attain more robust performance, when using direct sequence spread
spectrum.
This document summarizes a research paper that analyzes the symbol error rate (SER) performance of multiple-input multiple-output (MIMO) multi-channel beam forming in double-scattering channels. It derives an asymptotic expansion of the MIMO channel matrix's eigenvalue distribution and uses it to obtain an approximate high signal-to-noise ratio (SNR) expression for average SER. The expression shows that SER is characterized by diversity gain and array gain, where diversity gain determines slope and array gain determines SNR gap from a benchmark curve. The analysis finds that sufficient scatterers are needed to achieve the diversity gain of Rayleigh channels, and below a threshold the array gain varies logarithmically with SNR.
Physical layer security in DF full-duplex relaying network: performance analysisnooriasukmaningtyas
In this letter, the system performance of the DF full-duplex (FD) relaying
communication network is investigated with physical layer security (PLS). In
this system model, the source (S) and the destination (D) communicate via a
helping relay (R) in the presence of the eavesdropper (E). From the system
model, we derive the closed-form expressions for intercept probability (IP)
and secrecy outage probability (SOP). For verifying the correctness of the
analytical analysis, the Monte Carlo simulation is conducted. In addition, the
influence of the main system parameter on the system performance is
investigated. Finally, the results show that the analytical and the simulation
values agree well with each other.
Performance Analysis of Differential Beamforming in Decentralized NetworksIJECEIAES
This paper proposes and analyzes a novel differential distributed beamforming strategy for decentralized two-way relay networks. In our strategy, the phases of the received signals at all relays are synchronized without requiring channel feedback or training symbols. Bit error rate (BER) expressions of the proposed strategy are provided for coherent and differential M-PSK modulation. Upper bounds, lower bounds, and simple approximations of the BER are also derived. Based on the theoretical and simulated BER performance, the proposed strategy offers a high system performance and low decoding complexity and delay without requiring channel state information at any transmitting or receiving antenna. Furthermore, the simple approximation of the BER upper bound shows that the proposed strategy enjoys the full diversity gain which is equal to the number of transmitting antennas.
Performance of Wideband Mobile Channel with Perfect Synchronism BPSK vs QPSK ...Editor Jacotech
Direct-sequence code-division multiple access (DS-CDMA) is
currently the subject of much research as it is a promising
multiple access capability for third and fourth generations
mobile communication systems. The synchronous DS-CDMA
system is well known for eliminating the effects of multiple
access interference (MAI) which limits the capacity and
degrades the BER performance of the system. In this paper,
we investigate the bit error rate (BER) performance of a
synchronous DS-CDMA system over a wideband mobile
radio channel. The BER performance is affected by the
difference in path length ΔL and the number of arriving
signals N. Furthermore, the effect of these parameters is
examined on the synchronous DS-CDMA system for different
users’ number as well as different processing gain Gp. In this
environment and under the above conditions the performances
of the BPSK (Binary Phase Shift Keying) and the QPSK
(Quadrature Phase Shift Keying) modulations are compared.
The promising simulation results showed the possibility of
applying this system to the wideband mobile radio channel.
Implementation of Joint Network Channel Decoding Algorithm for Multiple Acces...csandit
In this paper, we consider a Joint Network Channel Decoding (JNCD) algorithm applied to a
wireless network consisting to M users. For this purpose M sources desire to send information
to one receiver by the help of an intermediate node which is the relay. The Physical Layer
Network Coding (PLNC) allows the relay to decode the combined information being sent from
different transmitters. Then, it forwards additional information to the destination node which
receives also signals from source nodes. An iterative JNCD algorithm is developed at the
receiver to estimate the information being sent from each transmitter. Simulation results show
that the Bit Error Rate (BER) can be decreased by using this concept comparing to the
reference one which doesn’t consider the network coding.
Submission Deadline: 30th September 2022
Acceptance Notification: Within Three Days’ time period
Online Publication: Within 24 Hrs. time Period
Expected Date of Dispatch of Printed Journal: 5th October 2022
MODELING AND ANALYSIS OF SURFACE ROUGHNESS AND WHITE LATER THICKNESS IN WIRE-...IAEME Publication
White layer thickness (WLT) formed and surface roughness in wire electric discharge turning (WEDT) of tungsten carbide composite has been made to model through response surface methodology (RSM). A Taguchi’s standard Design of experiments involving five input variables with three levels has been employed to establish a mathematical model between input parameters and responses. Percentage of cobalt content, spindle speed, Pulse on-time, wire feed and pulse off-time were changed during the experimental tests based on the Taguchi’s orthogonal array L27 (3^13). Analysis of variance (ANOVA) revealed that the mathematical models obtained can adequately describe performance within the parameters of the factors considered. There was a good agreement between the experimental and predicted values in this study.
A STUDY ON THE REASONS FOR TRANSGENDER TO BECOME ENTREPRENEURSIAEME Publication
The study explores the reasons for a transgender to become entrepreneurs. In this study transgender entrepreneur was taken as independent variable and reasons to become as dependent variable. Data were collected through a structured questionnaire containing a five point Likert Scale. The study examined the data of 30 transgender entrepreneurs in Salem Municipal Corporation of Tamil Nadu State, India. Simple Random sampling technique was used. Garrett Ranking Technique (Percentile Position, Mean Scores) was used as the analysis for the present study to identify the top 13 stimulus factors for establishment of trans entrepreneurial venture. Economic advancement of a nation is governed upon the upshot of a resolute entrepreneurial doings. The conception of entrepreneurship has stretched and materialized to the socially deflated uncharted sections of transgender community. Presently transgenders have smashed their stereotypes and are making recent headlines of achievements in various fields of our Indian society. The trans-community is gradually being observed in a new light and has been trying to achieve prospective growth in entrepreneurship. The findings of the research revealed that the optimistic changes are taking place to change affirmative societal outlook of the transgender for entrepreneurial ventureship. It also laid emphasis on other transgenders to renovate their traditional living. The paper also highlights that legislators, supervisory body should endorse an impartial canons and reforms in Tamil Nadu Transgender Welfare Board Association.
BROAD UNEXPOSED SKILLS OF TRANSGENDER ENTREPRENEURSIAEME Publication
Since ages gender difference is always a debatable theme whether caused by nature, evolution or environment. The birth of a transgender is dreadful not only for the child but also for their parents. The pain of living in the wrong physique and treated as second class victimized citizen is outrageous and fully harboured with vicious baseless negative scruples. For so long, social exclusion had perpetuated inequality and deprivation experiencing ingrained malign stigma and besieged victims of crime or violence across their life spans. They are pushed into the murky way of life with a source of eternal disgust, bereft sexual potency and perennial fear. Although they are highly visible but very little is known about them. The common public needs to comprehend the ravaged arrogance on these insensitive souls and assist in integrating them into the mainstream by offering equal opportunity, treat with humanity and respect their dignity. Entrepreneurship in the current age is endorsing the gender fairness movement. Unstable careers and economic inadequacy had inclined one of the gender variant people called Transgender to become entrepreneurs. These tiny budding entrepreneurs resulted in economic transition by means of employment, free from the clutches of stereotype jobs, raised standard of living and handful of financial empowerment. Besides all these inhibitions, they were able to witness a platform for skill set development that ignited them to enter into entrepreneurial domain. This paper epitomizes skill sets involved in trans-entrepreneurs of Thoothukudi Municipal Corporation of Tamil Nadu State and is a groundbreaking determination to sightsee various skills incorporated and the impact on entrepreneurship.
DETERMINANTS AFFECTING THE USER'S INTENTION TO USE MOBILE BANKING APPLICATIONSIAEME Publication
The banking and financial services industries are experiencing increased technology penetration. Among them, the banking industry has made technological advancements to better serve the general populace. The economy focused on transforming the banking sector's system into a cashless, paperless, and faceless one. The researcher wants to evaluate the user's intention for utilising a mobile banking application. The study also examines the variables affecting the user's behaviour intention when selecting specific applications for financial transactions. The researcher employed a well-structured questionnaire and a descriptive study methodology to gather the respondents' primary data utilising the snowball sampling technique. The study includes variables like performance expectations, effort expectations, social impact, enabling circumstances, and perceived risk. Each of the aforementioned variables has a major impact on how users utilise mobile banking applications. The outcome will assist the service provider in comprehending the user's history with mobile banking applications.
ANALYSE THE USER PREDILECTION ON GPAY AND PHONEPE FOR DIGITAL TRANSACTIONSIAEME Publication
Technology upgradation in banking sector took the economy to view that payment mode towards online transactions using mobile applications. This system enabled connectivity between banks, Merchant and user in a convenient mode. there are various applications used for online transactions such as Google pay, Paytm, freecharge, mobikiwi, oxygen, phonepe and so on and it also includes mobile banking applications. The study aimed at evaluating the predilection of the user in adopting digital transaction. The study is descriptive in nature. The researcher used random sample techniques to collect the data. The findings reveal that mobile applications differ with the quality of service rendered by Gpay and Phonepe. The researcher suggest the Phonepe application should focus on implementing the application should be user friendly interface and Gpay on motivating the users to feel the importance of request for money and modes of payments in the application.
VOICE BASED ATM FOR VISUALLY IMPAIRED USING ARDUINOIAEME Publication
The prototype of a voice-based ATM for visually impaired using Arduino is to help people who are blind. This uses RFID cards which contain users fingerprint encrypted on it and interacts with the users through voice commands. ATM operates when sensor detects the presence of one person in the cabin. After scanning the RFID card, it will ask to select the mode like –normal or blind. User can select the respective mode through voice input, if blind mode is selected the balance check or cash withdraw can be done through voice input. Normal mode procedure is same as the existing ATM.
IMPACT OF EMOTIONAL INTELLIGENCE ON HUMAN RESOURCE MANAGEMENT PRACTICES AMONG...IAEME Publication
There is increasing acceptability of emotional intelligence as a major factor in personality assessment and effective human resource management. Emotional intelligence as the ability to build capacity, empathize, co-operate, motivate and develop others cannot be divorced from both effective performance and human resource management systems. The human person is crucial in defining organizational leadership and fortunes in terms of challenges and opportunities and walking across both multinational and bilateral relationships. The growing complexity of the business world requires a great deal of self-confidence, integrity, communication, conflict and diversity management to keep the global enterprise within the paths of productivity and sustainability. Using the exploratory research design and 255 participants the result of this original study indicates strong positive correlation between emotional intelligence and effective human resource management. The paper offers suggestions on further studies between emotional intelligence and human capital development and recommends for conflict management as an integral part of effective human resource management.
VISUALISING AGING PARENTS & THEIR CLOSE CARERS LIFE JOURNEY IN AGING ECONOMYIAEME Publication
Our life journey, in general, is closely defined by the way we understand the meaning of why we coexist and deal with its challenges. As we develop the "inspiration economy", we could say that nearly all of the challenges we have faced are opportunities that help us to discover the rest of our journey. In this note paper, we explore how being faced with the opportunity of being a close carer for an aging parent with dementia brought intangible discoveries that changed our insight of the meaning of the rest of our life journey.
A STUDY ON THE IMPACT OF ORGANIZATIONAL CULTURE ON THE EFFECTIVENESS OF PERFO...IAEME Publication
The main objective of this study is to analyze the impact of aspects of Organizational Culture on the Effectiveness of the Performance Management System (PMS) in the Health Care Organization at Thanjavur. Organizational Culture and PMS play a crucial role in present-day organizations in achieving their objectives. PMS needs employees’ cooperation to achieve its intended objectives. Employees' cooperation depends upon the organization’s culture. The present study uses exploratory research to examine the relationship between the Organization's culture and the Effectiveness of the Performance Management System. The study uses a Structured Questionnaire to collect the primary data. For this study, Thirty-six non-clinical employees were selected from twelve randomly selected Health Care organizations at Thanjavur. Thirty-two fully completed questionnaires were received.
Living in 21st century in itself reminds all of us the necessity of police and its administration. As more and more we are entering into the modern society and culture, the more we require the services of the so called ‘Khaki Worthy’ men i.e., the police personnel. Whether we talk of Indian police or the other nation’s police, they all have the same recognition as they have in India. But as already mentioned, their services and requirements are different after the like 26th November, 2008 incidents, where they without saving their own lives has sacrificed themselves without any hitch and without caring about their respective family members and wards. In other words, they are like our heroes and mentors who can guide us from the darkness of fear, militancy, corruption and other dark sides of life and so on. Now the question arises, if Gandhi would have been alive today, what would have been his reaction/opinion to the police and its functioning? Would he have some thing different in his mind now what he had been in his mind before the partition or would he be going to start some Satyagraha in the form of some improvement in the functioning of the police administration? Really these questions or rather night mares can come to any one’s mind, when there is too much confusion is prevailing in our minds, when there is too much corruption in the society and when the polices working is also in the questioning because of one or the other case throughout the India. It is matter of great concern that we have to thing over our administration and our practical approach because the police personals are also like us, they are part and parcel of our society and among one of us, so why we all are pin pointing towards them.
A STUDY ON TALENT MANAGEMENT AND ITS IMPACT ON EMPLOYEE RETENTION IN SELECTED...IAEME Publication
The goal of this study was to see how talent management affected employee retention in the selected IT organizations in Chennai. The fundamental issue was the difficulty to attract, hire, and retain talented personnel who perform well and the gap between supply and demand of talent acquisition and retaining them within the firms. The study's main goals were to determine the impact of talent management on employee retention in IT companies in Chennai, investigate talent management strategies that IT companies could use to improve talent acquisition, performance management, career planning and formulate retention strategies that the IT firms could use. The respondents were given a structured close-ended questionnaire with the 5 Point Likert Scale as part of the study's quantitative research design. The target population consisted of 289 IT professionals. The questionnaires were distributed and collected by the researcher directly. The Statistical Package for Social Sciences (SPSS) was used to collect and analyse the questionnaire responses. Hypotheses that were formulated for the various areas of the study were tested using a variety of statistical tests. The key findings of the study suggested that talent management had an impact on employee retention. The studies also found that there is a clear link between the implementation of talent management and retention measures. Management should provide enough training and development for employees, clarify job responsibilities, provide adequate remuneration packages, and recognise employees for exceptional performance.
ATTRITION IN THE IT INDUSTRY DURING COVID-19 PANDEMIC: LINKING EMOTIONAL INTE...IAEME Publication
Globally, Millions of dollars were spent by the organizations for employing skilled Information Technology (IT) professionals. It is costly to replace unskilled employees with IT professionals possessing technical skills and competencies that aid in interconnecting the business processes. The organization’s employment tactics were forced to alter by globalization along with technological innovations as they consistently diminish to remain lean, outsource to concentrate on core competencies along with restructuring/reallocate personnel to gather efficiency. As other jobs, organizations or professions have become reasonably more appropriate in a shifting employment landscape, the above alterations trigger both involuntary as well as voluntary turnover. The employee view on jobs is also afflicted by the COVID-19 pandemic along with the employee-driven labour market. So, having effective strategies is necessary to tackle the withdrawal rate of employees. By associating Emotional Intelligence (EI) along with Talent Management (TM) in the IT industry, the rise in attrition rate was analyzed in this study. Only 303 respondents were collected out of 350 participants to whom questionnaires were distributed. From the employees of IT organizations located in Bangalore (India), the data were congregated. A simple random sampling methodology was employed to congregate data as of the respondents. Generating the hypothesis along with testing is eventuated. The effect of EI and TM along with regression analysis between TM and EI was analyzed. The outcomes indicated that employee and Organizational Performance (OP) were elevated by effective EI along with TM.
INFLUENCE OF TALENT MANAGEMENT PRACTICES ON ORGANIZATIONAL PERFORMANCE A STUD...IAEME Publication
By implementing talent management strategy, organizations would have the option to retain their skilled professionals while additionally working on their overall performance. It is the course of appropriately utilizing the ideal individuals, setting them up for future top positions, exploring and dealing with their performance, and holding them back from leaving the organization. It is employee performance that determines the success of every organization. The firm quickly obtains an upper hand over its rivals in the event that its employees having particular skills that cannot be duplicated by the competitors. Thus, firms are centred on creating successful talent management practices and processes to deal with the unique human resources. Firms are additionally endeavouring to keep their top/key staff since on the off chance that they leave; the whole store of information leaves the firm's hands. The study's objective was to determine the impact of talent management on organizational performance among the selected IT organizations in Chennai. The study recommends that talent management limitedly affects performance. On the off chance that this talent is appropriately management and implemented properly, organizations might benefit as much as possible from their maintained assets to support development and productivity, both monetarily and non-monetarily.
A STUDY OF VARIOUS TYPES OF LOANS OF SELECTED PUBLIC AND PRIVATE SECTOR BANKS...IAEME Publication
Banking regulations act of India, 1949 defines banking as “acceptance of deposits for the purpose of lending or investment from the public, repayment on demand or otherwise and withdrawable through cheques, drafts order or otherwise”, the major participants of the Indian financial system are commercial banks, the financial institution encompassing term lending institutions. Investments institutions, specialized financial institution and the state level development banks, non banking financial companies (NBFC) and other market intermediaries such has the stock brokers and money lenders are among the oldest of the certain variants of NBFC and the oldest market participants. The asset quality of banks is one of the most important indicators of their financial health. The Indian banking sector has been facing severe problems of increasing Non- Performing Assets (NPAs). The NPAs growth directly and indirectly affects the quality of assets and profitability of banks. It also shows the efficiency of banks credit risk management and the recovery effectiveness. NPA do not generate any income, whereas, the bank is required to make provisions for such as assets that why is a double edge weapon. This paper outlines the concept of quality of bank loans of different types like Housing, Agriculture and MSME loans in state Haryana of selected public and private sector banks. This study is highlighting problems associated with the role of commercial bank in financing Small and Medium Scale Enterprises (SME). The overall objective of the research was to assess the effect of the financing provisions existing for the setting up and operations of MSMEs in the country and to generate recommendations for more robust financing mechanisms for successful operation of the MSMEs, in turn understanding the impact of MSME loans on financial institutions due to NPA. There are many research conducted on the topic of Non- Performing Assets (NPA) Management, concerning particular bank, comparative study of public and private banks etc. In this paper the researcher is considering the aggregate data of selected public sector and private sector banks and attempts to compare the NPA of Housing, Agriculture and MSME loans in state Haryana of public and private sector banks. The tools used in the study are average and Anova test and variance. The findings reveal that NPA is common problem for both public and private sector banks and is associated with all types of loans either that is housing loans, agriculture loans and loans to SMES. NPAs of both public and private sector banks show the increasing trend. In 2010-11 GNPA of public and private sector were at same level it was 2% but after 2010-11 it increased in many fold and at present there is GNPA in some more than 15%. It shows the dark area of Indian banking sector.
EXPERIMENTAL STUDY OF MECHANICAL AND TRIBOLOGICAL RELATION OF NYLON/BaSO4 POL...IAEME Publication
An experiment conducted in this study found that BaSO4 changed Nylon 6's mechanical properties. By changing the weight ratios, BaSO4 was used to make Nylon 6. This Researcher looked into how hard Nylon-6/BaSO4 composites are and how well they wear. Experiments were done based on Taguchi design L9. Nylon-6/BaSO4 composites can be tested for their hardness number using a Rockwell hardness testing apparatus. On Nylon/BaSO4, the wear behavior was measured by a wear monitor, pinon-disc friction by varying reinforcement, sliding speed, and sliding distance, and the microstructure of the crack surfaces was observed by SEM. This study provides significant contributions to ultimate strength by increasing BaSO4 content up to 16% in the composites, and sliding speed contributes 72.45% to the wear rate
ROLE OF SOCIAL ENTREPRENEURSHIP IN RURAL DEVELOPMENT OF INDIA - PROBLEMS AND ...IAEME Publication
The majority of the population in India lives in villages. The village is the back bone of the country. Village or rural industries play an important role in the national economy, particularly in the rural development. Developing the rural economy is one of the key indicators towards a country’s success. Whether it be the need to look after the welfare of the farmers or invest in rural infrastructure, Governments have to ensure that rural development isn’t compromised. The economic development of our country largely depends on the progress of rural areas and the standard of living of rural masses. Village or rural industries play an important role in the national economy, particularly in the rural development. Rural entrepreneurship is based on stimulating local entrepreneurial talent and the subsequent growth of indigenous enterprises. It recognizes opportunity in the rural areas and accelerates a unique blend of resources either inside or outside of agriculture. Rural entrepreneurship brings an economic value to the rural sector by creating new methods of production, new markets, new products and generate employment opportunities thereby ensuring continuous rural development. Social Entrepreneurship has the direct and primary objective of serving the society along with the earning profits. So, social entrepreneurship is different from the economic entrepreneurship as its basic objective is not to earn profits but for providing innovative solutions to meet the society needs which are not taken care by majority of the entrepreneurs as they are in the business for profit making as a sole objective. So, the Social Entrepreneurs have the huge growth potential particularly in the developing countries like India where we have huge societal disparities in terms of the financial positions of the population. Still 22 percent of the Indian population is below the poverty line and also there is disparity among the rural & urban population in terms of families living under BPL. 25.7 percent of the rural population & 13.7 percent of the urban population is under BPL which clearly shows the disparity of the poor people in the rural and urban areas. The need to develop social entrepreneurship in agriculture is dictated by a large number of social problems. Such problems include low living standards, unemployment, and social tension. The reasons that led to the emergence of the practice of social entrepreneurship are the above factors. The research problem lays upon disclosing the importance of role of social entrepreneurship in rural development of India. The paper the tendencies of social entrepreneurship in India, to present successful examples of such business for providing recommendations how to improve situation in rural areas in terms of social entrepreneurship development. Indian government has made some steps towards development of social enterprises, social entrepreneurship, and social in- novation, but a lot remains to be improved.
OPTIMAL RECONFIGURATION OF POWER DISTRIBUTION RADIAL NETWORK USING HYBRID MET...IAEME Publication
Distribution system is a critical link between the electric power distributor and the consumers. Most of the distribution networks commonly used by the electric utility is the radial distribution network. However in this type of network, it has technical issues such as enormous power losses which affect the quality of the supply. Nowadays, the introduction of Distributed Generation (DG) units in the system help improve and support the voltage profile of the network as well as the performance of the system components through power loss mitigation. In this study network reconfiguration was done using two meta-heuristic algorithms Particle Swarm Optimization and Gravitational Search Algorithm (PSO-GSA) to enhance power quality and voltage profile in the system when simultaneously applied with the DG units. Backward/Forward Sweep Method was used in the load flow analysis and simulated using the MATLAB program. Five cases were considered in the Reconfiguration based on the contribution of DG units. The proposed method was tested using IEEE 33 bus system. Based on the results, there was a voltage profile improvement in the system from 0.9038 p.u. to 0.9594 p.u.. The integration of DG in the network also reduced power losses from 210.98 kW to 69.3963 kW. Simulated results are drawn to show the performance of each case.
APPLICATION OF FRUGAL APPROACH FOR PRODUCTIVITY IMPROVEMENT - A CASE STUDY OF...IAEME Publication
Manufacturing industries have witnessed an outburst in productivity. For productivity improvement manufacturing industries are taking various initiatives by using lean tools and techniques. However, in different manufacturing industries, frugal approach is applied in product design and services as a tool for improvement. Frugal approach contributed to prove less is more and seems indirectly contributing to improve productivity. Hence, there is need to understand status of frugal approach application in manufacturing industries. All manufacturing industries are trying hard and putting continuous efforts for competitive existence. For productivity improvements, manufacturing industries are coming up with different effective and efficient solutions in manufacturing processes and operations. To overcome current challenges, manufacturing industries have started using frugal approach in product design and services. For this study, methodology adopted with both primary and secondary sources of data. For primary source interview and observation technique is used and for secondary source review has done based on available literatures in website, printed magazines, manual etc. An attempt has made for understanding application of frugal approach with the study of manufacturing industry project. Manufacturing industry selected for this project study is Mahindra and Mahindra Ltd. This paper will help researcher to find the connections between the two concepts productivity improvement and frugal approach. This paper will help to understand significance of frugal approach for productivity improvement in manufacturing industry. This will also help to understand current scenario of frugal approach in manufacturing industry. In manufacturing industries various process are involved to deliver the final product. In the process of converting input in to output through manufacturing process productivity plays very critical role. Hence this study will help to evolve status of frugal approach in productivity improvement programme. The notion of frugal can be viewed as an approach towards productivity improvement in manufacturing industries.
A MULTIPLE – CHANNEL QUEUING MODELS ON FUZZY ENVIRONMENTIAEME Publication
In this paper, we investigated a queuing model of fuzzy environment-based a multiple channel queuing model (M/M/C) ( /FCFS) and study its performance under realistic conditions. It applies a nonagonal fuzzy number to analyse the relevant performance of a multiple channel queuing model (M/M/C) ( /FCFS). Based on the sub interval average ranking method for nonagonal fuzzy number, we convert fuzzy number to crisp one. Numerical results reveal that the efficiency of this method. Intuitively, the fuzzy environment adapts well to a multiple channel queuing models (M/M/C) ( /FCFS) are very well.
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdfMalak Abu Hammad
Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers:
* What is Vector Search?
* Importance and benefits of vector search
* Practical use cases across various industries
* Step-by-step implementation guide
* Live demos with code snippets
* Enhancing LLM capabilities with vector search
* Best practices and optimization strategies
Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications.
#MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology
UiPath Test Automation using UiPath Test Suite series, part 5DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 5. In this session, we will cover CI/CD with devops.
Topics covered:
CI/CD with in UiPath
End-to-end overview of CI/CD pipeline with Azure devops
Speaker:
Lyndsey Byblow, Test Suite Sales Engineer @ UiPath, Inc.
Full-RAG: A modern architecture for hyper-personalizationZilliz
Mike Del Balso, CEO & Co-Founder at Tecton, presents "Full RAG," a novel approach to AI recommendation systems, aiming to push beyond the limitations of traditional models through a deep integration of contextual insights and real-time data, leveraging the Retrieval-Augmented Generation architecture. This talk will outline Full RAG's potential to significantly enhance personalization, address engineering challenges such as data management and model training, and introduce data enrichment with reranking as a key solution. Attendees will gain crucial insights into the importance of hyperpersonalization in AI, the capabilities of Full RAG for advanced personalization, and strategies for managing complex data integrations for deploying cutting-edge AI solutions.
Unlocking Productivity: Leveraging the Potential of Copilot in Microsoft 365, a presentation by Christoforos Vlachos, Senior Solutions Manager – Modern Workplace, Uni Systems
Threats to mobile devices are more prevalent and increasing in scope and complexity. Users of mobile devices desire to take full advantage of the features
available on those devices, but many of the features provide convenience and capability but sacrifice security. This best practices guide outlines steps the users can take to better protect personal devices and information.
How to Get CNIC Information System with Paksim Ga.pptxdanishmna97
Pakdata Cf is a groundbreaking system designed to streamline and facilitate access to CNIC information. This innovative platform leverages advanced technology to provide users with efficient and secure access to their CNIC details.
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slackshyamraj55
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
Removing Uninteresting Bytes in Software FuzzingAftab Hussain
Imagine a world where software fuzzing, the process of mutating bytes in test seeds to uncover hidden and erroneous program behaviors, becomes faster and more effective. A lot depends on the initial seeds, which can significantly dictate the trajectory of a fuzzing campaign, particularly in terms of how long it takes to uncover interesting behaviour in your code. We introduce DIAR, a technique designed to speedup fuzzing campaigns by pinpointing and eliminating those uninteresting bytes in the seeds. Picture this: instead of wasting valuable resources on meaningless mutations in large, bloated seeds, DIAR removes the unnecessary bytes, streamlining the entire process.
In this work, we equipped AFL, a popular fuzzer, with DIAR and examined two critical Linux libraries -- Libxml's xmllint, a tool for parsing xml documents, and Binutil's readelf, an essential debugging and security analysis command-line tool used to display detailed information about ELF (Executable and Linkable Format). Our preliminary results show that AFL+DIAR does not only discover new paths more quickly but also achieves higher coverage overall. This work thus showcases how starting with lean and optimized seeds can lead to faster, more comprehensive fuzzing campaigns -- and DIAR helps you find such seeds.
- These are slides of the talk given at IEEE International Conference on Software Testing Verification and Validation Workshop, ICSTW 2022.
In the rapidly evolving landscape of technologies, XML continues to play a vital role in structuring, storing, and transporting data across diverse systems. The recent advancements in artificial intelligence (AI) present new methodologies for enhancing XML development workflows, introducing efficiency, automation, and intelligent capabilities. This presentation will outline the scope and perspective of utilizing AI in XML development. The potential benefits and the possible pitfalls will be highlighted, providing a balanced view of the subject.
We will explore the capabilities of AI in understanding XML markup languages and autonomously creating structured XML content. Additionally, we will examine the capacity of AI to enrich plain text with appropriate XML markup. Practical examples and methodological guidelines will be provided to elucidate how AI can be effectively prompted to interpret and generate accurate XML markup.
Further emphasis will be placed on the role of AI in developing XSLT, or schemas such as XSD and Schematron. We will address the techniques and strategies adopted to create prompts for generating code, explaining code, or refactoring the code, and the results achieved.
The discussion will extend to how AI can be used to transform XML content. In particular, the focus will be on the use of AI XPath extension functions in XSLT, Schematron, Schematron Quick Fixes, or for XML content refactoring.
The presentation aims to deliver a comprehensive overview of AI usage in XML development, providing attendees with the necessary knowledge to make informed decisions. Whether you’re at the early stages of adopting AI or considering integrating it in advanced XML development, this presentation will cover all levels of expertise.
By highlighting the potential advantages and challenges of integrating AI with XML development tools and languages, the presentation seeks to inspire thoughtful conversation around the future of XML development. We’ll not only delve into the technical aspects of AI-powered XML development but also discuss practical implications and possible future directions.
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?Speck&Tech
ABSTRACT: A prima vista, un mattoncino Lego e la backdoor XZ potrebbero avere in comune il fatto di essere entrambi blocchi di costruzione, o dipendenze di progetti creativi e software. La realtà è che un mattoncino Lego e il caso della backdoor XZ hanno molto di più di tutto ciò in comune.
Partecipate alla presentazione per immergervi in una storia di interoperabilità, standard e formati aperti, per poi discutere del ruolo importante che i contributori hanno in una comunità open source sostenibile.
BIO: Sostenitrice del software libero e dei formati standard e aperti. È stata un membro attivo dei progetti Fedora e openSUSE e ha co-fondato l'Associazione LibreItalia dove è stata coinvolta in diversi eventi, migrazioni e formazione relativi a LibreOffice. In precedenza ha lavorato a migrazioni e corsi di formazione su LibreOffice per diverse amministrazioni pubbliche e privati. Da gennaio 2020 lavora in SUSE come Software Release Engineer per Uyuni e SUSE Manager e quando non segue la sua passione per i computer e per Geeko coltiva la sua curiosità per l'astronomia (da cui deriva il suo nickname deneb_alpha).
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024Neo4j
Neha Bajwa, Vice President of Product Marketing, Neo4j
Join us as we explore breakthrough innovations enabled by interconnected data and AI. Discover firsthand how organizations use relationships in data to uncover contextual insights and solve our most pressing challenges – from optimizing supply chains, detecting fraud, and improving customer experiences to accelerating drug discoveries.
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdfPaige Cruz
Monitoring and observability aren’t traditionally found in software curriculums and many of us cobble this knowledge together from whatever vendor or ecosystem we were first introduced to and whatever is a part of your current company’s observability stack.
While the dev and ops silo continues to crumble….many organizations still relegate monitoring & observability as the purview of ops, infra and SRE teams. This is a mistake - achieving a highly observable system requires collaboration up and down the stack.
I, a former op, would like to extend an invitation to all application developers to join the observability party will share these foundational concepts to build on:
GraphRAG for Life Science to increase LLM accuracyTomaz Bratanic
GraphRAG for life science domain, where you retriever information from biomedical knowledge graphs using LLMs to increase the accuracy and performance of generated answers
Infrastructure Challenges in Scaling RAG with Custom AI modelsZilliz
Building Retrieval-Augmented Generation (RAG) systems with open-source and custom AI models is a complex task. This talk explores the challenges in productionizing RAG systems, including retrieval performance, response synthesis, and evaluation. We’ll discuss how to leverage open-source models like text embeddings, language models, and custom fine-tuned models to enhance RAG performance. Additionally, we’ll cover how BentoML can help orchestrate and scale these AI components efficiently, ensuring seamless deployment and management of RAG systems in the cloud.