Huntsman Advanced Materials is a leading global supplier of high-performance synthetic polymer systems and adhesives. They provide epoxy, polyurethane, and methacrylate adhesives suited for bonding various materials like metals, plastics, composites and more. Adhesive bonding offers benefits over other joining methods like improved performance, reduced costs, stress distribution and design freedom. Their adhesive products are supplied in various packages and their engineering adhesives selector guide provides information on typical properties of different adhesive options.
FRP for masonry, stone, flat/curved arch terracotta and cindercrete stabilization with a Class A Fire Rating for interior, exterior, and above or below grade (wet) applications.
Effect of fibers on Hybrid Matrix CompositesIJERA Editor
Frictional co-efficient, impact quality; dielectric quality and compound resistance examination of bamboo/glass strands strengthened epoxy half breed composites were considered. Two distinctive crossover composites, for example, treated and untreated bamboo filaments were manufactured and impact of soluble base treatment of the bamboo strands on these properties were additionally concentrated on. It was watched that, effect quality and frictional co-proficient properties of the half and half composites increment with expansion in glass fiber content. These properties observed to be higher when salt treated bamboo filaments were utilized as a part of the half breed composites. It is watched that, concoction resistance was fundamentally increments for all chemicals with the exception of carbon tetrachloride. The disposal of nebulous hemi-cellulose with salt treatment prompting higher crystallinity of the bamboo filaments with antacid treatment may in charge of these perceptions. The impact of salt treatment on the holding between glass/bamboo composites was additionally concentrated on. Checking electron magnifying lens (SEM) were additionally directed on the cross segments of broke surfaces with a specific end goal to rate the execution crossover composites were likewise conferred bear natural products
FRP for masonry, stone, flat/curved arch terracotta and cindercrete stabilization with a Class A Fire Rating for interior, exterior, and above or below grade (wet) applications.
Effect of fibers on Hybrid Matrix CompositesIJERA Editor
Frictional co-efficient, impact quality; dielectric quality and compound resistance examination of bamboo/glass strands strengthened epoxy half breed composites were considered. Two distinctive crossover composites, for example, treated and untreated bamboo filaments were manufactured and impact of soluble base treatment of the bamboo strands on these properties were additionally concentrated on. It was watched that, effect quality and frictional co-proficient properties of the half and half composites increment with expansion in glass fiber content. These properties observed to be higher when salt treated bamboo filaments were utilized as a part of the half breed composites. It is watched that, concoction resistance was fundamentally increments for all chemicals with the exception of carbon tetrachloride. The disposal of nebulous hemi-cellulose with salt treatment prompting higher crystallinity of the bamboo filaments with antacid treatment may in charge of these perceptions. The impact of salt treatment on the holding between glass/bamboo composites was additionally concentrated on. Checking electron magnifying lens (SEM) were additionally directed on the cross segments of broke surfaces with a specific end goal to rate the execution crossover composites were likewise conferred bear natural products
Dental waxes/certified fixed orthodontic courses by Indian dental academy Indian dental academy
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and offering a wide range of dental certified courses in different formats.
Indian dental academy provides dental crown & Bridge,rotary endodontics,fixed orthodontics,
Dental implants courses.for details pls visit www.indiandentalacademy.com ,or call
0091-9248678078
Jute, an eco-friendly and affordable fiber grown profusely in India, possess unique combination of properties suited for the manufacture of non-textile products. However, its contribution for technical applications is limited at present. In this research, an effort has been made to investigate the physical and morphological properties of jute fiber when incorporated in epoxy matrix with a view to widen the share of jute fibers for engineered applications. Composite specimens containing nonwoven jute mat and alkali treated short jute fibers with different weight percentages (1, 2 wt%) were made using epoxy resin. The water absorption, thickness swelling (TS) and morphology [scanning electron microscopy (SEM)] tests of the bio composites were performed. As the fiber fraction ratio was increased the values for water absorption (WA) and thickness swell (TS) were found to be increased. The samples reinforced with 2 wt. percent fiber fractions showed maximum WA and TS in both water environments.
STUDIES ON DURABILITY, STRENGTH AND STRUCTURAL PROPERTIES OF FLYASH BASED PAP...Satyajit Behera
presentation shows the strength durability and structural properties of the flyash based papercrete bricks. the papercrete bricks are the new type material for the buildings.
International Journal of Engineering Research and DevelopmentIJERD Editor
Electrical, Electronics and Computer Engineering,
Information Engineering and Technology,
Mechanical, Industrial and Manufacturing Engineering,
Automation and Mechatronics Engineering,
Material and Chemical Engineering,
Civil and Architecture Engineering,
Biotechnology and Bio Engineering,
Environmental Engineering,
Petroleum and Mining Engineering,
Marine and Agriculture engineering,
Aerospace Engineering.
Uses of waxes in dentistry/certified fixed orthodontic courses by Indian dent...Indian dental academy
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and offering a wide range of dental certified courses in different formats.
Indian dental academy provides dental crown & Bridge,rotary endodontics,fixed orthodontics,
Dental implants courses.for details pls visit www.indiandentalacademy.com ,or call
0091-9248678078
Here the composite material was fabricated using sugarcane bagasse, jute fibre & with glass fibre as a hybrid material and the mechanical properties of this material was studied.
Introduction to Techsil's Hotmelt Adhesive and Glue Gun RangeTechsil Ltd
An introduction to Techsil's range of different Hotmelt adhesives and glue guns and their applications in manufacturing sectors. Contains a useful selection guide.
Dental waxes/certified fixed orthodontic courses by Indian dental academy Indian dental academy
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and offering a wide range of dental certified courses in different formats.
Indian dental academy provides dental crown & Bridge,rotary endodontics,fixed orthodontics,
Dental implants courses.for details pls visit www.indiandentalacademy.com ,or call
0091-9248678078
Jute, an eco-friendly and affordable fiber grown profusely in India, possess unique combination of properties suited for the manufacture of non-textile products. However, its contribution for technical applications is limited at present. In this research, an effort has been made to investigate the physical and morphological properties of jute fiber when incorporated in epoxy matrix with a view to widen the share of jute fibers for engineered applications. Composite specimens containing nonwoven jute mat and alkali treated short jute fibers with different weight percentages (1, 2 wt%) were made using epoxy resin. The water absorption, thickness swelling (TS) and morphology [scanning electron microscopy (SEM)] tests of the bio composites were performed. As the fiber fraction ratio was increased the values for water absorption (WA) and thickness swell (TS) were found to be increased. The samples reinforced with 2 wt. percent fiber fractions showed maximum WA and TS in both water environments.
STUDIES ON DURABILITY, STRENGTH AND STRUCTURAL PROPERTIES OF FLYASH BASED PAP...Satyajit Behera
presentation shows the strength durability and structural properties of the flyash based papercrete bricks. the papercrete bricks are the new type material for the buildings.
International Journal of Engineering Research and DevelopmentIJERD Editor
Electrical, Electronics and Computer Engineering,
Information Engineering and Technology,
Mechanical, Industrial and Manufacturing Engineering,
Automation and Mechatronics Engineering,
Material and Chemical Engineering,
Civil and Architecture Engineering,
Biotechnology and Bio Engineering,
Environmental Engineering,
Petroleum and Mining Engineering,
Marine and Agriculture engineering,
Aerospace Engineering.
Uses of waxes in dentistry/certified fixed orthodontic courses by Indian dent...Indian dental academy
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and offering a wide range of dental certified courses in different formats.
Indian dental academy provides dental crown & Bridge,rotary endodontics,fixed orthodontics,
Dental implants courses.for details pls visit www.indiandentalacademy.com ,or call
0091-9248678078
Here the composite material was fabricated using sugarcane bagasse, jute fibre & with glass fibre as a hybrid material and the mechanical properties of this material was studied.
Introduction to Techsil's Hotmelt Adhesive and Glue Gun RangeTechsil Ltd
An introduction to Techsil's range of different Hotmelt adhesives and glue guns and their applications in manufacturing sectors. Contains a useful selection guide.
Join Andy Lister and Michael McQuaid for an introduction to the design basics behind Geosynthetics and MSE Walls!
The presenters will begin by introducing different geosynthetics and their uses, followed by focusing on geogrid properties and what you need to know when selecting and specifying different geogrids. You will then learn about how mechanically stabilized earth (MSE) retaining walls work. This will include general design requirements, through the review of potential failure modes. The presenters will finish by discussing different MSE retaining wall facing options while highlighting successful past projects.
A perfect PPT for jute fiber.
No need to edit again on this.
An executed project by own for final year project in B.Tech. and we got 100% result on this.
Try this for your review
About different types of pultrusion resinsSugamPolytech
Also, a typical type of polyester resin is quite resistant to water. As a result, it is assumed to be one of the most beneficial for manufacturing products, usually done in small sarcastic configurations.
Polyester resin can make molds of any size or shape, and it helps fabricate parts. But polyurethane resin is more costly, but it provides excellent production than polyester resin in terms of flexibility and tenacity.
Company History
• Founded by Nick Attwood in 1992
• Nick was previously R&D Scientist for En Tout Cas, first synthetic
equestrian surface company
• Over 400 facilities installed, predominantly in the U.S.A.
• Customers include many top-drawer competitors and trainers
• Unrivalled focus on science & innovation, and pre/after-sale service
A workshop hosted by the South African Journal of Science aimed at postgraduate students and early career researchers with little or no experience in writing and publishing journal articles.
Delivering Micro-Credentials in Technical and Vocational Education and TrainingAG2 Design
Explore how micro-credentials are transforming Technical and Vocational Education and Training (TVET) with this comprehensive slide deck. Discover what micro-credentials are, their importance in TVET, the advantages they offer, and the insights from industry experts. Additionally, learn about the top software applications available for creating and managing micro-credentials. This presentation also includes valuable resources and a discussion on the future of these specialised certifications.
For more detailed information on delivering micro-credentials in TVET, visit this https://tvettrainer.com/delivering-micro-credentials-in-tvet/
June 3, 2024 Anti-Semitism Letter Sent to MIT President Kornbluth and MIT Cor...Levi Shapiro
Letter from the Congress of the United States regarding Anti-Semitism sent June 3rd to MIT President Sally Kornbluth, MIT Corp Chair, Mark Gorenberg
Dear Dr. Kornbluth and Mr. Gorenberg,
The US House of Representatives is deeply concerned by ongoing and pervasive acts of antisemitic
harassment and intimidation at the Massachusetts Institute of Technology (MIT). Failing to act decisively to ensure a safe learning environment for all students would be a grave dereliction of your responsibilities as President of MIT and Chair of the MIT Corporation.
This Congress will not stand idly by and allow an environment hostile to Jewish students to persist. The House believes that your institution is in violation of Title VI of the Civil Rights Act, and the inability or
unwillingness to rectify this violation through action requires accountability.
Postsecondary education is a unique opportunity for students to learn and have their ideas and beliefs challenged. However, universities receiving hundreds of millions of federal funds annually have denied
students that opportunity and have been hijacked to become venues for the promotion of terrorism, antisemitic harassment and intimidation, unlawful encampments, and in some cases, assaults and riots.
The House of Representatives will not countenance the use of federal funds to indoctrinate students into hateful, antisemitic, anti-American supporters of terrorism. Investigations into campus antisemitism by the Committee on Education and the Workforce and the Committee on Ways and Means have been expanded into a Congress-wide probe across all relevant jurisdictions to address this national crisis. The undersigned Committees will conduct oversight into the use of federal funds at MIT and its learning environment under authorities granted to each Committee.
• The Committee on Education and the Workforce has been investigating your institution since December 7, 2023. The Committee has broad jurisdiction over postsecondary education, including its compliance with Title VI of the Civil Rights Act, campus safety concerns over disruptions to the learning environment, and the awarding of federal student aid under the Higher Education Act.
• The Committee on Oversight and Accountability is investigating the sources of funding and other support flowing to groups espousing pro-Hamas propaganda and engaged in antisemitic harassment and intimidation of students. The Committee on Oversight and Accountability is the principal oversight committee of the US House of Representatives and has broad authority to investigate “any matter” at “any time” under House Rule X.
• The Committee on Ways and Means has been investigating several universities since November 15, 2023, when the Committee held a hearing entitled From Ivory Towers to Dark Corners: Investigating the Nexus Between Antisemitism, Tax-Exempt Universities, and Terror Financing. The Committee followed the hearing with letters to those institutions on January 10, 202
it describes the bony anatomy including the femoral head , acetabulum, labrum . also discusses the capsule , ligaments . muscle that act on the hip joint and the range of motion are outlined. factors affecting hip joint stability and weight transmission through the joint are summarized.
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...Dr. Vinod Kumar Kanvaria
Exploiting Artificial Intelligence for Empowering Researchers and Faculty,
International FDP on Fundamentals of Research in Social Sciences
at Integral University, Lucknow, 06.06.2024
By Dr. Vinod Kumar Kanvaria
Introduction to AI for Nonprofits with Tapp NetworkTechSoup
Dive into the world of AI! Experts Jon Hill and Tareq Monaur will guide you through AI's role in enhancing nonprofit websites and basic marketing strategies, making it easy to understand and apply.
MATATAG CURRICULUM: ASSESSING THE READINESS OF ELEM. PUBLIC SCHOOL TEACHERS I...NelTorrente
In this research, it concludes that while the readiness of teachers in Caloocan City to implement the MATATAG Curriculum is generally positive, targeted efforts in professional development, resource distribution, support networks, and comprehensive preparation can address the existing gaps and ensure successful curriculum implementation.
Acetabularia Information For Class 9 .docxvaibhavrinwa19
Acetabularia acetabulum is a single-celled green alga that in its vegetative state is morphologically differentiated into a basal rhizoid and an axially elongated stalk, which bears whorls of branching hairs. The single diploid nucleus resides in the rhizoid.
Thinking of getting a dog? Be aware that breeds like Pit Bulls, Rottweilers, and German Shepherds can be loyal and dangerous. Proper training and socialization are crucial to preventing aggressive behaviors. Ensure safety by understanding their needs and always supervising interactions. Stay safe, and enjoy your furry friends!
A review of the growth of the Israel Genealogy Research Association Database Collection for the last 12 months. Our collection is now passed the 3 million mark and still growing. See which archives have contributed the most. See the different types of records we have, and which years have had records added. You can also see what we have for the future.
2. About Huntsman Advanced Materials
Huntsman Advanced Materials is a leading global supplier of synthetic and formulated polymer systems for
customers requiring high-performance materials which outperform the properties, functionality and durability of
traditional materials. Over 2,300 associates at 13 locations worldwide work to fulfill this promise every day.
The primary markets we serve include:
• Aerospace & Defense
• Construction
• Consumer-DIY
• Electrical Engineering
• Electronics
• Paint & Coatings
• Sport & Leisure
• Wind Energy
Engineering Adhesives
For over 60 years, Huntsman Engineering Adhesives have been preferred by customers worldwide for tough
bonding applications. Today, our high-performance epoxies, polyurethanes, and methacrylates, continue to provide
users with outstanding performance, as well as easy handling and processing.
Huntsman Engineering Adhesives are well suited for use on metals, rigid and engineering thermoplastics, thermoset
plastics and composites, rubber, ceramic, glass and other substrate combinations.
Each family of Engineering Adhesives offers different performance characteristics:
Epoxies:
One and two-component epoxies are known for their ability to produce high-strength, rigid bonds on substrates
ranging from metals to thermosetting plastics and composites. The systems are formulated with a wide range of
viscosities and work lives to meet the processing and handling requirements of most projects. Benefits include:
low shrinkage, excellent chemical and corrosion resistance, high-temperature performance to 350° F (180° C),
and good electrical insulating properties.
Polyurethanes:
Two-component polyurethane adhesives generally produce more flexible, resilient bonds than epoxies and are
typically the material of choice for joining tough-to-bond engineering thermoplastics, rigid plastics and composites,
and metal-to-plastic assemblies. Polyurethanes are easy to apply with minimal substrate preparation, offer good
sag resistance and cure quickly at room temperature. Once cured, the adhesives maintain outstanding resilience
even at low temperatures and feature good shear strength and high impact resistance.
Methacrylates:
High strength and fast cure cycles characterize Huntsman’s methacrylate adhesives. Methacrylates are well suited
for coating small and large areas with work lives ranging from one to 20 minutes and may require less surface prepa-
ration. Handling time is from two to 35 minutes at room temperature, and adhesives can be applied from 20 to 300
mil. thick. Cured methacrylates exhibit high lap shear strength comparable to epoxies and good tensile strength.
1
3. Adhesive bonding is one of the most versatile technologies available to the
manufacturing industry as it allows the assembly of a multitude of dissimilar
materials and components.
Benefits include:
• Improved product performance
• Optimize product design
• Reduce manufacturing and product cost
Advantages of using adhesives are:
• Ability to join a wide range of materials
• High load carrying capacity
• Excellent stress distribution
• Outstanding fatigue resistance
• Smooth surfaces
• Completely sealed joints
• Design freedom
• User friendly processing conditions – room temperature to 200° C maximum
• Ideal for composite materials
• Bonding of skin panels to foams and honeycomb structures
• Very low weight potential
• High specific performance – strength or stiffness/density
• Excellent resistance to fuels and oils
• Good general resistance to water, chemicals and solvents
• Potential material cost reductions
• Reduced labor costs
Packaging
Huntsman engineering adhesives are supplied in a variety of packaging options. Consult your Huntsman
Advanced Materials sales representative for information on available package sizes for specific adhesives.
4. Engineering Adhesives
Typical Properties
Araldite® AW 2104 / Araldite® AW 8621 Araldite® 8628 / Araldite® AW 106 / Araldite® AW 8680 / Araldite® AW 8680 / Araldite® AW 8680 /
Hardener HW 2934 Araldite® AY 557 / / Hardener HW Araldite® 8629 Hardener HV 953 Hardener HW 8680 Araldite® AY 8650 / Araldite® AY 8650 / Araldite® AW 8680 / Hardener HW 5542 Hardener HW 5541 Araldite® 8683 /
(Araldite® 2012) Fastweld™ 10 Hardener HY 557 8621-3 (Araldite® 2028) (Araldite® 2011) (Araldite® 2040) Hardener HY 8650 Hardener 5090-1 Hardener HW 8685 (Araldite® 2042) (Araldite® 2041) Hardener HY 8683
Key Property RAPID CURE TRANSPARENT MULTI PURPOSE FLEXIBLE
Chemical Type EPO EPO EPO PUR PUR EPO PUR PUR PUR PUR PUR PUR PUR
• High shear and peel • Suitable for small • Transparent bondline • Tough and Resilient • Fast curing • High shear and peel • Long open time • Spray applied • Can be roll coated or • Tough and resilient • Bonds a wide variety • Bonds a wide variety • Tough and resilient
strength parts and repair work • Well suited for small • Well suited for plastic • UV stable strength • Gap filling • Good performance high speed extrusion • Bonds a wide variety of materials of materials • Easily dispensable
• Tough and resilient • Excellent general parts bonding • Easy to apply at broad range of applied of materials • Rapid cure • Rapid cure
• Water clear • Ideal for bonding plastics • Well suited for filter
• Bonds a wide variety purpose shop • Long working time temperatures • Good temperature range • Instant thixotropy after • Ideal for bonding plastics • Ideal for bonding plastics bonding
of materials adhesive • Bonds a wide variety performance mixing • Gap filling
of materials • Bonds a wide variety
Key Features of materials
• Features good peel
strength • Good peel strength
Viscosity, Mixed, cp (RT) 30,000 250,000 Self-leveling Self-leveling 2,000 45,000 50,000 6,000 6,000 35,000 Thixotropic Paste 50,000 3,000
Processing Data
Mix Ratio, R/H (V/V) 100/100 100/100 100/100 85/100 100/100 100/100 100/100 100/40 100/40 100/100 100/100 100/100 100/60
Pot Life (Gel Time) @ 77°F, 100g mix 7 3 3 5 4 100 15 9 80 9 3 15 15
Minimum Cure Time, 77°F, hr 24 4 4 12 6 24 48 24 24 12 6 16 24
Color, Mixed Adhesive Pale yellow Gray Colorless Black Colorless Pale yellow Gray Beige Beige Black Pink Pink Blue
Lap shear strength, Al*, psi 2,600 2,800 2,560 2,900 2,000 3,700 1,200 2,300 2,300 2,200 2,300 1,930 TBD
% Elongation NA 5 TBD 250 34 9 165 30 TBD 250 250 250 475
Tg* (DMA), °F(°C) 130 (55) 160 (71) TBD 122 (50) 45 (7) DSC 147 (64) 82 (28) 127 (53) TBD 88 (31) 86 (30) 126 (52) 32 (0)
Performance Data
Gap Filling (Sag Resistance) No Yes No No No No Yes No No Yes Yes Yes No
Resistance Properties
Thermal E M E M M G M M M M M M M
Chemical G G G M M E M M M M M M M
Water G G G M M G M M M M M M M
Impact E M M E G E E E E E E E E
Tubes √ √
Cartridges
50ml √ √ √
Packaging
200ml √
Working Packs √
Pail √ √ √ √ √ √ √ √ √ √ √
Drums √ √ √ √ √
Key: E=Excellent, G=Good, M=Moderate, EPO=Epoxy, ACR=Acrylic, PUR=Polyurethane * Please refer to TDS for specific cure cylces
3 4
5. Engineering Adhesives
Typical Properties
XD 4661 A / XD 4662 / XB 5308 / Araldite® AW 139 /
Araldite® AW 8595 / Araldite® AW 8545-1 / XD 4661 B Hardener 4662 Hardener 5309-1 Araldite® AY 557 / TDR 1100-11 Resin / Araldite® 8579 / Hardener 5323 Araldite® AV 8574 /
Hardener HW 8595 Hardener HW 8545-1 (Araldite® 2021) (Araldite® 2022) (Araldite® 2015) Hardener HY 5049 Hardener 1100-11 Araldite® 9234 Hardener 8579 Araldite® AV 170 (Araldite® 2014) Hardener HV 8574
Key Property TOUGHENED LONG OPEN TIME TEMPERATURE / CHEMICAL RESITANT
Chemical Type EPO EPO ACR ACR EPO EPO EPO PUR EPO EPO EPO EPO
• Long working life • Good Flexibility • High shear and • Excellent resistance to • Ideal for bonding • High strength under • Bonding glass laminate, • Moisture curable • Long working life • Cures at 140-180°C • Heat resistant to 248°F • Long working life
• Bonds a wide variety • Low coefficient of peel strength gasoline and oil exposure composites static load wood and plastic • Well suited for bonding • Gap filling • Heat resistant to 120°C (120°C) • Aluminum filled
of materials thermal expansion • Very fast curing with good • Versatile and gap filling • Low shrinkage • Laminating adhesive components honeycomb structures • Gap-filling
• Low shrinkage • Very good peel strength • Thermal conductivity
• Excellent on “less than • Excellent on “less than gap filling properties • Rapid curing • Gap filling • Transparent bond line • Clear bond lines at • Long working life • Bonds a wide variety
high-temp cures • Gap filling
perfectly” prepped perfectly” prepped • Excellent bond to a • Minimal surface • High shear and peel of materials
surfaces surfaces wide range of plastics, preparation required strength • Ideal for archery
Key Features composites and metals equipment
Viscosity, Mixed, cp (RT) 21,000 43,000 45,000 60,000 Thixotropic Paste 2,800 13,000 3,100 125,000 Thixotropic Paste Thixotropic Paste 118,000
Processing Data
Mix Ratio, R/H (V/V) 100/100 100/100 100/100 100/100 100/100 100/54 100/50 One part 100/40 One part 100/50 100/50
Pot Life (Gel Time) @ 77°F, 100g mix 60 120 3 10 35 75 95 >60 60 See Data Sheet 60 120
Minimum Cure Time, 77°F, hr 24 24 24 24 24 24 24 24 24 See Data Sheet 24 1
Color, Mixed Adhesive Cream Light green Pale yellow Beige Beige Amber Translucent Brownish red Gray Off-white Gray Black
Lap shear strength, Al*, psi 2,600 3,000 3,200 3,600 2,400 2,400 4,100 TBD 2,300 4,000 2,700 3,400
% Elongation 50 20 60 60 4 4 5 TBD 1 1.4 TBD TBD
Tg* (DMA), °F(°C) 162 (72) 135 (57) 102 (39) 106 (41) 181 (83) 142 (61) 126 (52) TBD 183 (84) 264 (129) 169 (76) 198 (92)
Performance Data
Gap Filling (Sag Resistance) No No Yes Yes Yes No No No Yes Yes Yes Yes
Resistance Properties
Thermal G G M M E G G G E E E E
Chemical G G G M G E G M E E E E
Water G G G G G E G M G E E G
Impact E G E E G G G E M M G M
Tubes
Cartridges
50ml √
Packaging
200ml √
Working Packs √ √ √ √
Pail √ √ √ √ √ √ √ √
Drums √ √ √ √ √
Key: E=Excellent, G=Good, M=Moderate, EPO=Epoxy, ACR=Acrylic, PUR=Polyurethane * Please refer to TDS for specific cure cylces
5 6