Shanta Engineering is incepted in the year 1978. We are one of the leading manufacturers and exporters of a wide range of products. We manufacture a wide range of Testing Instruments and Equipment's that are used to test rubber, plastic, cables and allied materials. Our product range includes Laboratory Testing Equipment, Cable Testing Instruments, Testing Machine and machines for agricultural application. Our range of products are manufactured as per different standards used by our customers and also sometimes they are customized to satisfy special requirements of our customers. With a group of experienced & talented personnel together our design & development of machine / instruments are at par with the imported testing equipment's on quality basis. Although we are offering the highest quality level to match with the imported Testing Equipment's, we always see to it that the cost of our all equipment's are affordable to a small budget buyers. We export our product to Indian Subcontinent country.

1. 1) TORSION TESTING MACHINE
2) CABLE TESTING EQUIPMENT'S
3) THERMAL STABILITY TEST APPARATUS IS
HTTP://WWW.TENSILETESTERMANUFACTURER.COM
Shanta Engineering
Presentation On……

2. Torsion Testing Machine
 Manufacturer & Exporter of Torsion
Testing Machine & Torque Testing
Machine. Our product range also
comprises of Tensile Testing
Machine, Laboratory Testing
Equipment and Laboratory
Equipment.

3. TorqueTestingMachine
 Item Code: Se-TTV100
 DigitalTorsionTesting Machine is designed to perform
TorsionTest on Insulator of varying heights and for
similar application on other products. Multiple drive
options are available to suit customer requirement.The
applied torque is displayed digitally with facility to
display peak torque at end of the test.

4.  T-slots are provided on the mounting table
to fix insulators of varying base dimension.
The vertical spacing between the base
plate and the coupler is adjustable through
motorized operation. Front door is
provided for the safety of operator during
the test. Additionally emergency switch is
provided to disable the drives.

5. Leading Specifications:
Capacity: 1,000 Nm
Accuracy:
Better than +/- 1% in the torque range
5% to F.S.
Torsion Speed: 0.5 RPM
Vertical Clearance:
200-750mm (motorized adjustment at
300mm/min)
Mounting plate:
300mm Dia. withT-slots at 900, for up
to M12 bolts
Table Height: 600mm
Measurement:
Digital (kg.m/Nm. Microprocessor
based
Power Supply: 415V +/-1%, 3-phase,50 Hz
Connected Load 0.5KVA
Dimensions: 600x450x1800mm (WxDxH)
Weight: 400 Kg
PC Interface: RS232 (Optional)

6. Cable Testing Equipment's
 We manufacture and export a wide range of Cable
Testing Instruments, which is specially designed to test
different physical properties of cable or its raw material.
Our range is widely appreciated by the clients due to its
durability, reliability, easy handling and low
maintenance.

7.  CableTesting Apparatus equipment comprise of a cubic
enclosure with inside dimensions of 3000 ± 30 mm and
constructed with suitable material fixed into a steel angle
frame.Transparent sealed windows shall be provided on
two opposite sides to permit the transmission of a beam of
light from the horizontal photometric system.

 Flame Retardation test apparatus for single cable
(Swedish Chimney)

 As per IS 10810 (part 61)
 The test equipment shall consist of a vertical steel tube
having a wall thickens of 0.8 ± 0.1 mm with rectangular
ventilation openings.
 A lid on this S.S.Tube is adjustable with the help of screw to
adjust the temperature.
 A dial gauge fitted above the lid to measure the distance it
has been adjusted.

8.  Apparatus to check Electric Cables under fire conditions:

 This test is carried out as per B.S. 6853: 1999
 The light source shall be a halogen lamp of 12 volts X 100
w.
 a suitable fan will be provided to ensure uniform
distribution of the smoke.
 Standard neutral density filters for periodic calibration of
equipment (optional)
 Fire retardance test for bunched cables
 This test is carried out as per IEC 60332-3 or IS 10810 (Part
62).These standard covers the method for testing of a
bunch of cables mounted vertically to determine their
relative ability to resist flame propagation.
 This test is carried in 4 x 2 x 1 meter chamber fitted with
burner specified in above standard, flow meters and Airflow
controls.
 Ladders will be provided as mentioned in the standard for
mounting of cables.

9. Thermal Stability Test Apparatus IS
 TheThermal stability is an accelerated
method to determine the rate of
degradation of PVC compound with time
under the influence of temperature.
Thermal stability is the indication time in
minutes, indicated by the red coloration of
pH paper produced by the evolution of
hydrochloric acid when PVC compound is
heated to optimum temperature.

10.  TECHNICAL SPECIFICATION
Aluminum block - Max.Temp.- 250ºC
Resolution - 0.1ºC
Accuracy - 1.0ºC
PID temp. Controller with inbuiltTimer.
Number of holes 10 nos. of diameter 5mm